Biomechanical Examination

39
Biomechanical Examination

description

Biomechanical Examination. Femoral Anteversion. How far in can the femur be rotated? How far out? Does the halfway point leave the femur internally or externally rotated?. Internally Rotated Hips. Intoe Gait Causes Internally rotated hips Internal tibial torsion Metatarsus adductus. - PowerPoint PPT Presentation

Transcript of Biomechanical Examination

Page 1: Biomechanical Examination

Biomechanical Examination

Page 2: Biomechanical Examination

Femoral Anteversion

How far in can the femur be rotated? How far out? Does the halfway point leave the femur internally or externally rotated?

Page 3: Biomechanical Examination

Internally Rotated Hips

Page 4: Biomechanical Examination

• Intoe Gait Causes

• Internally rotated hips• Internal tibial torsion• Metatarsus adductus

Page 5: Biomechanical Examination

Tibial Torsion

Page 6: Biomechanical Examination

Tibial Torsion

Page 7: Biomechanical Examination

Tibial Torsion

Page 8: Biomechanical Examination

Arch Height NWB• High, normal, low?

Page 9: Biomechanical Examination

Arch Height WB

• Did the arch go from high to normal or low?

• Did it go from normal to low?

• If so, it is a flexible flat foot.

Page 10: Biomechanical Examination

Subtalar Joint ROM

NormalInversion 35o

Eversion 15

Page 11: Biomechanical Examination

Subtalar Joint ROM• Place one thumb under 5th metatarsal head • Place one thumb on the medial side of the subtalar

joint. • Pronate and supinate the foot and palpate the head

of the talus popping in and out. When the head just dissappears, the STJ is in neutral position.

• Now push up on the 5th metatarsal to lock the Midtarsal joint.

This is the position that the foot should be in to take an impression for orthotics.

Page 12: Biomechanical Examination

Cast with STJ in Neutral position and MTJ locked

Page 13: Biomechanical Examination

Supination Resistance Test

• Place two fingers under navicular and lift superiorly.• In a foot which has a normal STJ axis location, the examiner will

only have to exert a few pounds of digital force to cause STJ supination.

Page 14: Biomechanical Examination

Midtarsal Joint ROM

• Place STJ in neutral position• Pronate and supinate forefoot • Is range of motion normal, limited, or

hypermobile?

Page 15: Biomechanical Examination

Relaxed Calcaneal Stance PositionNon-Weight Bearing

• Rearfoot varus, valgus, or normal?

Page 16: Biomechanical Examination

Relaxed Calcaneal Stance PositionWeight Bearing

Page 17: Biomechanical Examination

Relaxed Calcaneal Stance Position

Page 18: Biomechanical Examination

Forefoot to Rearfoot Position

Forefoot valgusForefoot varus with plantarflexed first ray

With STJ in neutral position, what is FF position?

Page 19: Biomechanical Examination

Forefoot Position: Valgus

Page 20: Biomechanical Examination

Forefoot Position: Varus

• With STJ in neutral position, what is FF position?

Page 21: Biomechanical Examination

1st Ray Position

plantarflexed first ray

Forefoot varus with plantarflexed first ray

Page 22: Biomechanical Examination

Position of Digits

Page 23: Biomechanical Examination

Claw Toes

Page 24: Biomechanical Examination

Hammertoe

Page 25: Biomechanical Examination

Mallet Toe

Page 26: Biomechanical Examination

Ankle Dorsiflexion

• Measure with knee extended and again with knee flexed. Push hard to dorsiflex!

NormalDorsiflexion 20°Plantarflexion 50°

Page 27: Biomechanical Examination

Hallux Dorsiflexion

• Normal • Flexion 30o

Page 28: Biomechanical Examination

Knee Position

• Genu varus • Genu valgus• Genu recurvatum

Page 29: Biomechanical Examination

Genu varum

Bow Legs

Page 30: Biomechanical Examination

Genu valgum

Page 31: Biomechanical Examination

Genu Recurvatum

Page 32: Biomechanical Examination

Patellas pointing inward or outward due to femoral rotation

Page 33: Biomechanical Examination

Leg Length Discrepancy

• Measure from ASIS to bisection of medial malleolus

Page 34: Biomechanical Examination

Base of Gait• narrow, normal or wide?

Page 35: Biomechanical Examination

Angle of Gait• straight, abducted or adducted

Page 36: Biomechanical Examination

Jack Test

• The Hubscher maneuver or Jack Test refers to a method of evaluating the flexibility of a pes planus (flat foot type).

• The test is performed with the patient weight bearing while the clinician dorsiflexes the hallux and watches for the formation of an arch. A positive result (arch formation) results from the flatfoot being flexible.

• A negative result (lack of arch formation) results from the flatfoot being rigid.

Page 37: Biomechanical Examination

Jack Test

Page 38: Biomechanical Examination

Lunge Test

• The angle made by anterior tibia/shin to vertical

• <35-38 degrees is considered restricted, making the patient more prone to injuries.

Page 39: Biomechanical Examination

Gait Analysis

• HEAD - straight or tilted• SHOULDER - are they level• PELVIC TILT - any tilting one side to the other• KNEE - any internal or external position• REARFOOT - where is the rearfoot at heel strike and at

midstance?• ARM SWING - are they even both sides• HEEL STRIKE• MIDSTANCE• PROPULSION: is there an abductory twist?