BINNA-MT Multi-Fiber Interferometer do... · Improved from BINNA, BINNA Plus has so many new...

BINNA-MT Multi-Fiber Interferometer

BINNA-MT is an automatic and non contact fiber endface interferometer for both multi fiber and single fiber connectors. It can measure the geometry parameters of multi fiber connector such as fiber height, core dip, X and Y angel, radius of curvature with white light and measure geometry parameters of single fiber connector with red light. The software can display the surface of the connector in 3D image for a very short time, it need only 8s to test 12-core MT connector. The BINNA-MT is intelligent , efficient, stable and accurate and very helpful in improving the quality of the product.

Features:§ Non-Contact White Light Interferometer, No

Harm to Endface.§ Fast Auto Focus, Easy to Operate.§ ”One Click Measurement”: Only One Click

Needed for Entire Measurement.§ Fast Measurement: Only 8s Needed for 12

Core MT Measurement.§ Easy to Calibrate, No Need to Adjust

Hardware.§ Dual Language Software Interface, One Click

Changing English & Chinese.§ Customizable Measurement Standard,

Software will Judge the Product According the Standard Automatically.

§ Test Data and Report are Saved in Excel Format, Easy to Manage.

§ Anti-Vibration Design: Able to Used in Factory Environments.

ORDER CODE BINNA MT

BINNA-MT is able to measure up to 72 core MT multi fiber connector such as MPO and MTP and single fiber connector such as SC, LC, FC, E2000 by only one machine. Measuring APC connector is as easy as PC connector. The advanced software design makes that the changing the single & multi measurement by clicking mouse twice.

1 Single and Multi Fiber Measurement

BINNA-MT has extremely good software and hardware that makes test speed ultra fast. Only is 8sneeded to measure 12 core MT connector. The BINNA-MT is one of the fastest fiber endface interferometer.

2 Ultra Fast Test Speed

3 Auto Focus & Auto Calibration

BINNA-MT has equipped advanced test software and several automatic functions, such as auto focus, auto calibration and so on. The automatic functions makes that the BINNA-MT has no need to adjust the hardware to measure various types of connectors.

Interferometer

www.weidujs.comwww.dimension-tech.com1


5 Easy Operation

BINNA MT is very easy to operate. Changing fixtures need only remove and install two screws by hand due to universal fixture design. Only a few clicks on the main interface is needed to change or customize measurement profiles. BINNA-MT can increase the test efficiency and save the time of training; it is the best friend in manufacturing.

7 High Resolution 3D Image

The software can rebuild the surface with high resolution 3D image after each measurement.

4 Precise Fixtures, High Repeatability and Reproducibility

BINNA-MT has equipped with several high precise fixtures to measure types of connectors. MT fixtures use PIN guide structure to ensure the accuracy and precision of test result.The software has several patents-protected algorithms that makes the measurement more accurate, such as the algorithm designed for calculating CoreDip makes the result more sensible and reliable. The software has newest IEC standards to judge the test result in default that makes the test easy and precise.

6 Stable Data Link

BINNA-MT has improved the data connection, it uses USB cables with lock structure and ensure the stable data link during the measurement.

2.5mm Universal Fixture 1.25mm Universal Fixture MT Female Ferrule Fixture

2.5mm universal

fixture is able to

measure 2.5mm

connector and

ferrule such as SC,

FC, ST, E2000.

1.25mm universal fixture is able to

measure 1.25mm

connector and

ferrule such as

LC,MU.

MT ferrule fixture:

is able to measure

female type MT

ferrules such as

MTP, MPO

MT Female Connector Fixture MT Male Connector Fixture(Optional) MTRJ Female Connector Fixture(Optional)

MT female con-

nector fixture is

able to measure

female type MT

connector such as

MTP, MPO.

MT male con-

nector fixture is

able to measure

male type MT

connector such

as MTP, MPO

MTRJ female con-

nector fixture is

able to measure

female type MTRJ

connector.

8 Auto Generate Data and ReportThe data and report is generated by the software automatically in each measurement. The data and report are generated in Excel format and has data processing functions that is very helpful in data analysis.

Click to Expand

Interferometer

www.weidujs.comwww.dimension-tech.com 2

12 Specification

Item Range Repeatability* Reproducibility*

X/Y ROC(mm) 3~∞ 0.3% 0.5%

X/Y Angle(°) 0 or 8 ±0.01 ±0.02

Flatness Deviation 0~200nm ±0.01 ±0.02

Fiber Height(um) 0~8 ±0.015 ±0.025

Test Speed (s)MT-RJ Test: 2s

12 core MT connector: 8s

Auto Focus Speed (s) 2s

*Sigma Values: Repeatability values are calculated from 50 continuous measurements without insertion and rotation of the connector between measurements.Reproducibility values are calculated from 50 continuous measurement with insert and pull from fixtures between measurments.

9 Bare Ferrule Measurement

BINNA-MT is not only able to measure the geometry parameters of the connectors, but also can measure the geometry parameters of the bare ferrules.

10 Cleave Angle Measurement

11 Flat Polish Measurement


BINNA-MT is able to measure the cleaving angle of bare fiber.

BINNA-MT is able to measure ROC(radius of curvature) , Fiber Height and Angle of flat polishing connector.

Interferometer


BINNA Plus Auto Interferometer

ORDER CODE BINNA Plus

BINNA Plus is a full automatic fiber endface interferometer developed by Dimension Technology.Improved from BINNA, BINNA Plus has so many new functions such as full auto calibration, faster measurement, more testing standard. The BINNA Plus is a fast, accurate, stable single fiber endface interferometer.

1 Powerful Testing Function

BINNA Plus offers two type fixtures (2.5mm universal & 1.25mm universal) for testing most kinds of connectors. 2.5mm universal fixture is used to measure FC/PC, SC/PC, ST/PC, E2000/PC, DIN, FC/APC, SC/APC type connectors. 1.25mm universal is used to measure LC/PC,MU/PC, LC/APC type connectors. You only need adjusting the angle of stage by hand to transfer between APC and PC connector, no fixture change and calibration needed. The software has most recent IEC standard that makes measurement more accurate.

2 Ultra Fast and More Accurate

BINNA Plus has improved the software algorithm from BINNA. BINNA Plus is much faster and saves time of the measurement. BINNA Plus need less than 1s to test connector. BINNA Plus has been tested by

®Telcordia and has been proved to be accurate.

Features:§ Full Auto Focus.

§ Full Auto Calibration.

§ Auto Centering Image.

§ One Click Measurement, Auto Testing.

§ More Accurate and Stable.

§ Test in Less than 1s.

§ Universal Fixture, Easy to Change.

§ Easy to Swith Between PC & APC Testing.

§ Dual Language Interface.

§ Auto Generate Data and Report, Easy to Manage and Print.

Interferometer


3 Auto Calibration

BINNA Plus has full auto calibration function and makes it a full automatic interferometer. There is no need to adjust the hardware because the BINNA Plus will adjust the system by itself.

4 Auto Focus

BINNA Plus has improved the auto focus function from BINNA, BINNA Plus is much faster and more reliable. You will only need to click the “Measure” button and the software will find the interference ring and provide the results.Meanwhile, the BINNA Plus has manual focus functions makes measurement more convenient.

5 Auto Centering Image

BINNA Plus has auto centering image function that can find the fiber and makes it to center automatically within one click. No mouse drag or hardware adjustment needed.

6 New Generation Fixtures and Positioning Pieces

BINNA Plus has a new generation fixtures and positioning pieces. Especially patent-protected SC/APC positioning piece will ensure the repeatability and reproducibility in SC/APC connector measurement. The fixtures and positioning pieces are very durable and have longer life than the previous version.

7 Stable Data Link and Anti-Vibration Structure

BINNA Plus also has lock USB data cable to ensure stable data link. The anti vibration structure makes the measurement stable in factory environment.

Interferometer



8 Bare Ferrule Measurement

9 Cleave Angle Measurement

10 Flat Polishing Measurement

11 Specification


ROC(mm) 3~∞ ±0.1% ±0.2%

Fiber Height(nm) -160 ~ +160 ±1 ±2

Apex Offset(um) 0~200 ±0.5 ±1.5

APC Angle(°) 0 or 8 ±0.01 ±0.015

Test Speed 1s(Exclude Auto Focus)

Power Supply 12V

Weight 5.9kg(Main Frame)

Size L28.5*W16.2*H10.5(cm)

BINNA Plus is not only able to measure the geometry parameters of the connectors, but also can measure the geometry parameters of the bare ferrules.


BINNA Plus is able to measure the cleaving angle of bare fiber.

BINNA Plus is able to measure ROC(radius of curvature) , Fiber Height and Angle of flat polishing connector.

Interferometer



SANA Interferometer

Features:§ More Accurate and Faster Measurement.

§ Better Repeatability and Reproducibility.

§ Cost Efficient and Low Price.

§ Auto Centering Image Function.

§ Universal Fixture Design. Easy to Change.

§ Easy to Change Between PC and APC.

§ Convenient Calibration Process.



ORDER CODE SANA

SANA fiber endface interferometer is a type of cost-efficient non-contact interferometer with excellent performance developed by Dimension Technology. It is able to measure geometry parameters such as radius of curvature, apex offset, fibre height and polishing angle of APC connector; SANA shows situation of the fiber connector endfaces and is very helpful in manufacturing.

1 Powerful Testing FunctionSANA offers two type fixtures (2.5mm universal & 1.25mm universal) for testing most kinds of connectors. 2.5mm universal fixture is used to measure FC/PC, SC/PC, ST/PC, E2000/PC, DIN, FC/APC, SC/APC type connectors. 1.25mm universal is used to measure LC/PC,MU/PC, LC/APC type connectors. You only need adjusting the angle of stage by hand to transfer between APC and PC connector, no fixture change and calibration needed. The software has most recent IEC standard that makes measurement more accurate.

2 Accurate Measurement®SANA interferometer has been tested by Telcordia and has been proved to be accurate due to its

design.

Interferometer


3 Simple Interface and Outstanding 3D Images

SANA interferometer has a very simple and effective software interfaces. It has outstanding 3D rebuild technology and is able to judge the situation of the fiber connector endface. It can also generate the roughness and plot of the endface to improve process of production. The data and reports are generated in EXCEL format that makes it easy to manage and analysis.

5 Auto Centering Images

6 Cleave Angle MeasurementSANA is able to test cleave angle and many other products.

4 Stable Data Link and Anti Vibration Design

SANA has also lock USB connector ensures stable data links in various environments. Anti vibration design ensures test result stable in factory conditions.

SANA has auto centering image function that can find the fiber and makes it to center automatically within one click. No mouse drag or hardware adjustment needed.

SANA Interferometer

Interferometer


7 Flat Polishing Measurement

8 New Generation Fixtures and Positioning Pieces

9 Easy Calibration

SANA uses “rotate 6 point calibration” method to calibrate the system. The software will generate the offset automatically and will apply compensation by software while the offset is in range. There is no need to adjust the hardware in most conditions. The whole calibration process only need 2-3 minutes.

10 Specification


ROC (mm) 3~∞ ±0.1% ±0.2%

Fiber Height(nm) -160 ~ +160 ±1 ±2

Apex Offset(um) 0~200 ±0.5 ±1.5

APC Angle(°) 6~9 ±0.01 ±0.015

Power Supply 12V

Weight 6.2kg(Mainframe)

Size L37*W16.2*H11.5(cm)

SANA has a new generation fixtures and positioning pieces. Especially the patent-protected SC/APC positioning piece will ensure the repeatability and reproducibility in SC/APC connector measurement. The fixtures and positioning pieces have longer life time than the older version.


SANA Interferometer

SANA is able to measure ROC(radius of curvature) , Fiber Height and Angle of flat polishing connector.

Interferometer


SANA MINI Portable Interferometer

Features:§ Small Size and Light Weight.

§ Easy to Portable.

§ Only One USB needed, No Additional Power Supply.

§ Auto Centering Image.

§ Universal Fixture Design, Easy to Change.

§ Very Easy PC & APC Changing.

§ Elegant Design.



ORDER CODE SANA MINI

1 Extremely Portable and Light Weight

Small Size: 12*5*8.9(cm)Light Weight: Only 1kgCompact design USB Data Link and Power Supply

2 Powerful Testing Function

SANA MINI is a portable, non contact fiber endface interferometer developed by Dimension Technology for single fiber connector. Despite its incredible size, it can test geometry parameters of single fiber connector as well as bare fiber and bare ferrules. The performance of SANA MINI is as good as SANA. SANA MINI is the pioneer of portable interferometer and suitable for field usage and other situation that is very sensitive to the size of the interferometer.

SANA MINI offers two type fixtures (2.5mm universal & 1.25mm universal) for testing most kinds of connectors.

2.5mm universal fixture is used to measure FC/PC, SC/PC, ST/PC, E2000/PC, DIN, FC/APC, SC/APC type connectors. 1.25mm universal is used to measure LC/PC,MU/PC, LC/APC type connectors.

You only need press� the fixture to transfer� between APC and PC connector, no fixture change and calibration needed. The software has most recent IEC standard that makes measurement more accurate.

5cm

8.9cm

12cm

Interferometer


Press

PC Mode

Switch

APC Mode

4 Easy to Operate The focus handle and product is at the same side and very easy to operate. SANA MINI has the same interface as SANA. No need to change operation habit.SANA MINI need only a press to change between PC & APC measurement.

6 SpecificationItem Range Repeatability* Reproducibility*

ROC(mm) 3~∞ ±0.1% ±0.2%

Fiber Height(nm) -160 ~ +160 ±1 ±2

Apex Offset(um) 0~200 ±0.5 ±1.5

APC Angle(°) 0 or 8 ±0.02 ±0.03

Power Supply USB Only

Weight 1kg(Main Frame)

Size L12*W5*H8.9(cm)

3 SANA Interferometer in Small Size

SANA MINI has the same testing functions as SANA in very small size due to its advanced design.§ Auto Centering Image Function: SANA MINI also has auto centering image functions. § Simple Calibration: SANA MINI has the same calibration process as SANA. There is no need to adjust

the hardware in most conditions.§ Various Product Measurement: SANA MINI is also able to test bare ferrule, cleave angle and flat

polishing surface.

5 Stable Data Link

SANA MINI has locked USB cable and ensures stable data link.

SANA MINI Portable Interferometer


Interferometer


FA-GO Fiber Array Interferometer

Features:§ Multi Function Measurement, Most

Powerful Fiber Array Interferometer.

§ Up to 72 core Fiber Array Measurement.

§ Anti Vibration Design, High Accuracy.

§ Cost Efficient.

§ Auto Focus, High Speed.

ORDER CODE FA GO

FA-GO fiber array endface interferometer is the first instrument to measure Fiber Array in the world developed by Dimension Technology Inc. FA-GO measures the geometry parameters of fiber array endfaces. It guarantees the quality of the fiber arrays and able to improve quality and efficiency in PLC coupling.

FA-GO fiber array endface interferometer is able to analyze the geometry parameters of fiber arrays and provide 3D graphic images of endface. The test result will greatly improve the quality in manufacturing duration. It has auto focus function and is able to measure 72 cores once with high accuracy and high speed. The FA-GO can measure the parameters below:

(1)Polishing angle

(2)Tilt angle

(3)Roughness

(4)Fiber high and fiber high deviation

1 Powerful Fiber Array Testing Function

Interferometer


2 SpecificationItem Range Repeatability* Reproducibility*

Polish Angle(°) 8° or 45°(Customizable) ±0.01 ±0.02%

Tilt Angle(°) -0.5 ~ +0.5 ±0.01 ±0.02

Fiber Height(nm) -1000~+1000 ±3 ±5

Fiber Height Deviation

(nm)-1000~+1000 ±3 ±5

Auto Focus Speed

SMARTCHECK Intelligent Endface Inspector

Features:§ Auto Analysis.

§ Auto Focus.

§ Auto Change Fiber.

§ One Click Measurement.

§ Ultimate Test Speed: 5s needed for 12 Core MT Connector.

§ Fixtures for Most Types of Connectors.

§ Easy to Change between PC & APC, No Additional Fixture Needed.


§ High Quality Images.


ORDER CODE SMARTCHECK

SmartCheck is the first intelligent endface inspector developed by Dimension Technology. It has many automatic intelligent functions such as auto analyze, auto focus and auto change fiber functions. The automatic function and excellent image quality makes inspection smart and efficient.

1 Auto Analysis

SmartCheck can find the slightest defects and scratches on the endfaces due to its advanced software algorithms. It can judge the endfaces by software without human interference and eliminated human factors. Only less than 5 second needed for analyzing a 12 core fiber endface, which is much faster than operators and increase the efficiency and accuracy.

Analyze

2 Ultimate Speed

SmartCheck has well designed optical system and automatic platforms. It provides clear image and automatic functions. SmartCheck needs only 5s to test 12 core multifiber connectors.

Inspector


3 One Click MeasurementThe operator only needs clicking once to test 72 core connector within 1 minute due to well designed software and hardware.

4 Ultimate High Image Quality

SmartCheck has equipped high quality optical components and CCD with high resolution that makes SmartCheck has far better image quality than anyother inspector systems. The ultra high image quality ensures the test result is accurate and stable.

5 Auto Generate Data and Report

SmartCheck can generate data result and report in each measurement. The reports are generated in EXCEL format contain detail of tests which can improves quality and management and makes every endface traceable.

6 Customizable Standards, No Misjudgment

SmartCheck has set many standard of endfaces in defaults. The engineer can also customize the standard to fulfill the demands of the customers. You can set the range of the zone; quantity, longth and width of the scratches; quantity and size of defects easily. So the workers needs training about the endface no more. SmartCheck will increase the efficiency a lot.


ID

Describe

Company

Date Time 14:35:41

Inner Outer Count Result Count Result

Zone A 0 25 5 FAIL 0 PASS

Zone B 25 120 13 FAIL 4

Zone D 130 250 120 FAIL 3 PASS

Signer:

TEST REPORTSmartCheckDimension technology Co.,Ltd

Defects Scratches

FAIL14

2.5MM FC ConnectorDimension

27/08/2013

Zone NameDiameter(um)

FAIL

Inspector


9 Specifications

Item Parameters

Magnification 20X

Resolution 0.27um

Test Connectors Single Fiber Connector, MTRJ, MPO, MTP (1-72 core)

Test Speed 5s (12core MT connector, exclude auto focus)

Scan Range 6mm*15mm

Data Link USB2.0

Power Supply 12V

Size L26.5*W18.8*H14.7 cm

8 Real Time Statistics System

SmartCheck has server and client structure that can send the test data to the server in real time. The relative personal can access the result remotely.


Production

ManagerEngineer

Quality

Control

7 Stable Data LinkSmartCheck has locked USB cable and ensures stable data link.

Inspector


AUTOCHECK Intelligent Integrated Endface Inspector

Features:§ Auto Analysis.

§ Embedded System.

§ One Button Measurment.

§ Fast Measurement, Less than 2s Needed for Testing Single Fiber Connector.

§ Integrated Design.

§ Encircle Focus Ring.

§ Centered Fiber Core.


§ High Image Quality.

§ Auto Generate Data and Report, Easy to Manage and Print

§ Data Server (Optional).ORDER CODE AUTOCHECK

AutoCheck is a stand-alone intelligent fiber endface inspector developed by Dimension Technology. Embedded system and software provide stand-alone auto analysis function. The AutoCheck is an endface inspector with new concept.AutoCheck has the same software algorithm as SmartCheck and provide the same analysis accuracy. AutoCheck will judge the endface automatically even if you do not know anything about the endfaces.

1 Auto Analysis

AutoCheck has equipped the same algorithm as SmartCheck and provide same image analysis function. AutoCheck will find the defects and scratches automatically just after press the measure button.

2 Ultra High Image Quality

The optical structure of AutoCheck is based on acclaimed Easycheck and has a CCD with higher resolution. AutoCheck will provide ultra high image quality.

Inspector


4 Embedded Linux System

AutoCheck has embedded linux system and can analyze the endface without extenal computer. The software could be updated through internet or SD card and have the newest functions.

7 Data Communication

AutoCheck has many communication interfaces: ethernet, USB, SD card and so on. It can send the data and report to the server as well.

3 Customizable Endface StandardAutoCheck has the endface standard of most connectors including newest IEC standard. You can test the endface automatically even if you do not know anything about the endface. AutoCheck provide higher efficiency and stable test result than traditional inspectors. The standard could be customized to adopt any further situation.

5 Powerful Extend Hardware

AutoCheck uses the same adaptors as the Easycheck�and able to inspect series of optical connectors. Standard USB & PS/2 interface can connect various of instruments that can extend the function of AutoCheck.

6 Auto Generate Data and Report

AutoCheck can generate the data and report in SD card after each measurement that makes the endfaces traceable.

Application:§ Mass production

§ Quality control

§ Laboratory

§ R&D department

§ University


Inspector


8 Model and Specifications

Product Detection Introduction

CC Type has adaptors for connectors and ferrules, you can also use it to test TOSA

& ROSA (optional adaptors needed)

ZZ Type has adaptors for optical components such as TOSA, ROSA, you can also

use it to test connectors and ferrules (optional adaptors needed)

M

M Type has adaptors for optical components such as TOSA, ROSA and

transceivers such as SFP, QSFP, you can also use it to test connectors and

ferrules (optional adaptors needed)


AutoCheck has several models for different applications such as 80X, 200X, 400X magnifications, adjustable or fixed sight and adaptors for different products.

*Adjustable Sight model is used for testing multi-fiber connectors such as MPO、MTRJ、MTP.

Model AC200B AC400B AC200K AC400K

Magnification 200X 400X 200X 400X

X，Y Adjustable or Fixed

Sight *Fixed Fixed Adjustable Adjustable

CCD Resolution 1.3 million pixels

Video Output Mode Digital

Display 8" TFT 800*600 LCD

Output Interface 1*USB, 1*PS/2, 1*Ethernet, 1*SD card reader

Product Detection

Type

C O O O O

Z O O O O

M O X O X

Operation Temperature 0 ~ 50 ℃

Storage Temperature -10 ~ 55 ℃

Power Supply 12V DC

Size 270mm*245mm*155mm

Weight 1.6kg


Inspector


EASYCHECK Integrated Endface Inspector

Features:§ Integrated Design

§ Encircle Focus Ring

§ Dust Proof Design

§ Centered Fiber Core

§ Image Capturing Function

§ Image Output & Input Function

§ Ergonomics Design

EASYCHECK

Easycheck is an integrated endface inspector developed by Dimension Technology, it combines the microscope and monitors in one body. Due to its compact design, the instrument is easy to operate and saves the working space.Equipped with high resolution sensor and monitor, the Easycheck can detect even slightest defects and scratches on endface. it increases testing speed and protect operator’s eyesight in long term usage.

1 Integrated DesignEasycheck has a compact size due to its integrated design and saves working space, it is a great breakthrough compared with traditional endface inspector of separate structure and remove the annoying cables between monitor and microscope.

2 High Image Quality

With coaxial illumination optical magnify system, Easycheck can easily find the slight defects on fiber endface. High resolution image sensor and 8〞pure black-and-white digital TFT LCD can show the most truly details of fiber endface.

3 Unique StructureCompared with the traditional fiber endface inspector, Easycheck has so many unique features, including the encircle focus design, dust-proof design, image centered design. These features make the inspection more convenient and faster, and greatly extend the working life of the device.

4 Image Output & Input and Capture Function

Easycheck provides video input and output functions to fulfil the various demand of customers. The Easycheck is able to connect to Easyget portable inspector and make it very easy to test various female types of connectors.Easycheck also has image capture function, it can capture image of the endface and save it in SD card provided with Easycheck. The image capture function offers a great help in manufacturing and quality controlling.

Connect to Easyget Image Storage Function

ORDER CODE

Inspector


5 Designed for All Products Inspection

Easycheck has series of adaptors, and it is able to check all kinds of fiber connectors(including MPO/MTP, MT-RJ connector),Optical transceiver Module(including 40G-100G, MPO Module) , TOSA & ROSA components and so on.

40G & 100G Transceiver Module

Embedded

Ceramic Sleeves

Series of Adaptors

6 Adjustable Sight for Multi-Fiber ProductsEasycheck has models with adjustable sight designed for multi fiber connectors. The range of the adjustable sight is 4mm*4mm and able to cover 72 core MT ferrules and connectors. We have improved the adjustment handle to make the operator more comfortable.

7 Model Definition

ECXXX Y ZProduct Detection

Adjustable or Fixed Sight

Magnification


TOSA & ROSA

Inspection

LC transceiver

Inspection

MPO Connector Inspection

Inspector


8 Specifications

Model EC080B EC200B EC400B EC080K EC200K EC400K

Magnification 80X 200X 400X 80X 200X 400X

X，Y Axis Adjustable or

Fixed Sight*Fixed Fixed Fixed Adjustable Adjustable Adjustable

CCD Resolution 1/3" 520 Line CCD

CCD Mode PAL

Monitor 8" TFT 800*600 LCD

Output 1*RCA，1*SD card reader

Input 1*RCA，1*USB only for Easyget

Product Detection

C O O O O O O

Z O O O O O O

M O O X O O X

Operating Temperature 0 ~ 50 ℃

Storage Temperature -10 ~ 55 ℃

Power Supply 12V DC


Weight 1.6kg



Easycheck has several models for different applications such as 80X, 200X, 400X magnifications, adjustable or fixed sight and adaptors for different products.


CC Type has adaptors for connectors and ferrules, you can also use it to test TOSA

& ROSA (optional adaptors needed)

ZZ Type has adaptors for optical components such as TOSA, ROSA, you can also

use it to test connectors and ferrules (optional adaptors needed)

M

M Type has adaptors for optical components such as TOSA, ROSA and

transceivers such as SFP, QSFP, you can also use it to test connectors and ferrules

(optional adaptors needed)

*Adjustable Sight model is used for testing multi-fiber connectors such as MPO、MTRJ、MTP.

Inspector


EASYGET Portable Endface Inspector

Features:§ Easy to Operate, High Image Quality.

§ Small Size, Light Weight, Portable.

§ Optional 200X, 400X Magnification.

§ Series of tips for Types of Connectors.

§ Rechargeable Battery Inside, 8hr Working Time after Charge.

§ Able to Connect to Desktop Monitors

§ Better Data Connectors

§ New Data Acquisition Card, Better Image Quality.

EASYGET

Easyget is a portable type of fiber endface inspector developed by Dimension Technology. By magnifying 200~400 time of the objects, you can identity defects and scratches on the endface of connectors. It is your the best choice for endface inspection. Easyget comes along with portable 3.5 inch high resolution LCD monitor, it can work over 8 hours after recharge. There are also all kinds of tips which make Easyget to meet different requirements on inspecting.

1 Longer Life, Better Image Quality

We have improved the structure of Easyget and provide longer life term. The whole microscope has a sealed structure that will keep the optical component clean even in harsh environment.

2 Stable and Durable Connection

Easyget uses aviation electrical plugs instead of USB connector compared to the prev ious version. The image of easyget will stay clean and stable even in the harsh environment.

3 New Data Acquisition Card and Software

The new acquisition card is compatible for more operation system and has higher image quality. The image capture software has more functions such as auto brightness, auto analysis (optional). Easyget is able to connect to desktop monitor as well (optional conversion cable needed).

Durable Data Adaptor

ORDER CODE

Inspector


4 All Connector Inspection including MT

Easyget has equipped kinds of tips that is able to inspect connector, transceivers modules (SFP, QSFP) and optical components(TOSA, ROSA ). We have designed new MT adaptors that is able to inspect MPO and MTP products such as MPO, MTP connectors in adaptors, 40G, 100G modules and so on. Easyget is suitable for maintaining high density data center of next generation.

5 Specifications

Item Parameters

Magnification 400X or 200X

Video Format PAL

Monitor 3.5" TFT 220k pixel LCD

Power Consumption 3W

Operating Temperature -10℃-+50℃

Storage Temperature -20℃-+50℃

Power Supply 12V Rechargeable Battery or DC 12V

Life Time of Battery >8h

Size Monitor: 205mm*94mm*25mm

Microscope: Φ23mm*160mm

EASYGET Portable Endface Inspector

2.5mm APC universal tip 1.25mm APC universal tip MU/PC tip SC/APC tip LC/APC tip E2000/APC tip

2.5mm PC universal tip 1.25mm PC universal tip SC/PC tip LC/PC tip FC/PC tip ST/PC tip Inspector


FA-1 Fiber Array Endface Inspector

Features:§ Easy to Operate

§ High Image Quality

§ Fixture with Angle Suitable for 8 or 45 Degree.

§ Suitable for 4, 8, 16, 32, 64, 72, 128 Core Fiber Array.

§ 3D Platform, Long Life Term.

FA-1

The FA-1 Fiber Array endface inspector is developed for Fiber Array endface inspection. FA-1 can detect unhealthy spots such as dropping tank, collapse, scratch, stains and guarantees a high-quality coupling with PLC chips.

New patent protected FA fixture makes it convenient to replace products. It promotes the efficiency of fiber array endface inspecting and PLC coupling greatly. FA-1 is a necessary device in fiber array manufacturing as well as PLC coupling.

1 Patent-Protected Fixtures

FA- 1 uses 3D platform to adjust the position of the fiber array and provide high accuracy and much longer life time. You don’t need to refocus during the measurement in one fiber array. The microhead is very comfortable can increase the efficiency of measurement.

2 3D Platform, Longer Life Term

FA-1 has the same grade optical system as Easycheck and�has 300X magnification. FA-1 is the fiber array inspector with best image quality.

3 High Image Quality

4 Specification

Item Parameters

Magnification 300X

Video Format PAL


Fiber Array Compatibility 128 core

Fiber Array Angle（°） 6，8，10，45（Optional）

Power Supply 12V DC


Weight 1.8kg

ORDER CODEInspector


Suit200 Fiber Endface Cleaning and Inspection Kit

Features:§ High Image Quality

§ Small Size and Light Weight, Portable

§ High Clean Efficiency and Low Cost

§ Series Adaptors to Meet All Kinds of Test Requirement

§ Able to Detect Fault Point

§ Long Battery Life Time

SUIT 200

Suit 200 cleaning and inspection kit is a tool for fiber endface cleaning and inspection developed by Dimension Technology. The kit contains inspection (Easyget), fault locator and cleaning tools for kinds of male and female connectors such as SC, FC, ST, E2000, LC, MU and so on. The kit can make the endface clean and ensure good connection. Suit 200 is an ideal tool for installation, maintenance and management of network.

1 Well Chosen ToolsThe cleaning and inspection kit has many functions for fiber endfaces. The Easyget can inspect the endface in high image quality and the Easycleaner 2 and Cleanbox can clean kinds of connectors to fulfill the demand for any working environment.

Cleanbox

Easycleaner 2 (1.25mm/2.5mm)Cleaning Pen

106(1.25mm/2.5mm)Fault Locator

Easyget PortableEndface Inspector

2 Easyget Portable Endface Inspector

Easyget is an inspector with high image qual i ty and has been proved by many customers. The kit contains all kinds of adaptors and portable monitors, ready to inspect kinds of adaptors and connectors.

3 106 Fault Locator

The kit has 106 fault locator to find fault point o f t h e c o n n e c t i o n a n d s a v e t i m e i n maintenance.

ORDER CODE

Cleaner


4 For Various Types of Products

Cleaning and Inspection Kit has tool for inspect and clean various kinds of connectors such as SC, FC, ST, E2000, MU, LC and so on.

5 Specifications

Item Parameter

Magnification 400X or 200X

Resolution 1.5um（400X） or 2.5um（200X）

Power Supply 12V or Built-in Rechargeable Battery

Products Cleaned by

Cleaning Pen

FC, SC, ST, E2000 adaptor and connector（2.5mm type）

LC，MU adaptor and connector（1.25mm type）

Life Time of Cleaning Pen >800 times

Products Cleaned

by CleanboxSC, FC, ST, E2000, LC, MU, MPO connector

Life Time of Cleanbox >800 times

Operating Temperature -10~+50℃

Storage Temperature -20~+55℃

Weight 1.6kg

Size L 281mm*W 230mm*H 82mm

Suit200 Fiber Endface Cleaning and Inspection Kit

Cleaner


OFFSOON Mark II Endface Cleaning Machine

OFFSOON

Features:§ Gas & Liquid Cleaning.

§ User Friendly.

§ Universal Adaptors for Types of Products.

§ High Cleaning Efficiency: 95% Cleaning Rate

§ Easy & Safe Refill Cleaning Liquid

§ Low Cost, 15000 Times Cleaning Per Bottle of Liquid

§ Long Life Term

§ RoHS Compliant

Offsoon Mark II endface cleaning machine is a type of cleaning equipment with high performance and low cost, the Mark II has been improved according feedback from the customers of previous Offsoon. It uses revolutionary technology to quickly clean the endface of the female connectors to ensure low insert loss and high return loss in coupling. Due to its high efficiency, It is suitable for factories especially.

1 Principle of Cleaning

Offsoon uses liquid and gas to do cleaning job. Offsoon shoots clean liquid to dissolve oil and dirt and blow the end face with clean air stream to remove the liquid and dirt and make the endface clean. The whole process just need 1 seconds. Offsoon comes along with SC and LC type adaptors and fulfill almost every customer’s need in cleaning connectors.

Clean

Gas, liquid

Dissolve，Blow Dirt

Fiber

Ferrule

TOSA Components

Cleaning Adaptors

ORDER CODE

Cleaner


2 Improvements Provide Higher Cleaning Efficiency

Offsoon Mark II has many improvements compare to previous offsoon.1. Higher Cleaning Efficiency: Up to 95% cleaning effectiveness.2. Better Cleaning Program: less cleaning time, from 1.2s to 1s3. Improved Adaptors: better cleaning efficiency and product compatibility.4. Improved Gas Route: provide higher air pressure.5. Durable Components: seal rings with longer life term.

3 Variable Functions

Offsoon has 2 trigger method; handle switch and pedal switch. The pedal switch uses durable aircraft

grade plug to connect with the machine. The SC & LC adaptors can clean various products in high

efficiency.

4 Humanized Design

The handle fits the palm perfectly and reduce fatigue of the operators and increase efficiency. Liquid

refill is very easy and convenient.

It will not scratch the endface because the cleaning method is noncontact, the waste cleaning liquid is

aspirated back to the machine will not harm the operators and protects the environment.

Item Parameters

Gas Source Clean air or N or CO2 2

Air Pressure 4kg~6kg


Power Supply 12V

Cleaning Speed 1s

Weight 5kg

Size Mainframe: 265mm*205mm*92.5mm

Handle: 15mm*110mm

5 Specification

OFFSOON Mark II Endface Cleaning Machine

Cleaner


EASYCLEANER-2 Endface Cleaning Pen

EASYCLEANER

Features :§ Able to Clean 1.25mm Ferrules, such as

LC, MU

§ Able to Clean 2.5mm Ferrules, such as FC, SC, ST

§ Over 800 times Cleaning

§ Antistatic, no Secondary Pollution

§ Easy to Operate

§ High Clean Efficiency

Easycleaner-2 is a new type fiber endface cleaner, it is designed to clean both male and female optical connectors especially in optical distribution frames. The Easycleaner is very effective, you just need one “click” to make endfaces clean in one time .

106 Fault Locator

Features :§ Non-Contact Coupling Design: No Harm to

Fiber Endface

§ Constan Light Power Control: No Power Fluctuates when Voltage Varies

§ Overcome Dead Zone of OTDR: mm Level Accuracy

§ 650nm High Power LED: Can be Seen from Fault Position under 3mm PVC Cable Jacket

§ Small Size, Light Weight

106S / 106L

Model 106S 106L

Adaptor2.5mm universal

(FC、SC、ST、E2000)

1.25 universal

(LC、MU)

Wavelength 650nm

Output Power 5dBm

Distance ≥10km

Operating Temperature -10~+50℃

Storage Temperature -20~+65℃

Output Mode Continuous

Battery 1* AAA

Size Φ2.0mm*12.5mm

Weight 40g

106 Fiber Fault Locator is an instrument used to identify and locate fault position of fiber accurately and rapidly. The damage points of fiber can be seen clearly at the fault position through the PVC jacket of cable due to its powerful light source. 106 Fiber Fault Locator is the idea tool for locating fault position of fibers in optical network engineering due to its light weight, small size, high power and easy to use.

ORDER CODE

ORDER CODE

Cleaner


页 1页 2页 3页 4页 5页 6页 7页 8页 9页 10页 11页 12页 13页 14页 15页 16页 17页 18页 19页 20页 21页 22页 23页 24页 25页 26页 27页 28页 29页 30页 31

BINNA-MT Multi-Fiber Interferometer do... · Improved from BINNA, BINNA Plus has so many new...

Documents

Transcript of BINNA-MT Multi-Fiber Interferometer do... · Improved from BINNA, BINNA Plus has so many new...