(BILL OF QUANTITIES) SR. PARTICULARS QTY UNIT NO. · granite Sill, chowkhats, holdfasts etc....

SR.

NO.

PARTICULARS QTY UNIT

A PART A CIVIL WORK

i. DISMANTLING & BUY-BACK

1 Dismantling Existing Tiles Carefully breaking and

removing the existing tiles/ stone, waterproofing from

floors and walls without disturbing the structure including

cement mortar to get a smooth wall/floor including carting

away unserviceable material / debris to a place approved

by MCGM including all lead and lift. 370.00 SQ.MT.

2 Dismantling existing Doors (wood or aluminium)

shutters manually or by mechanical means including

granite Sill, chowkhats, holdfasts etc. Complete including

stacking the serviceable material as directed at site &

carting away unserviceable material/ debris to a place

approved by MCGMincluding all lead and lift. Complete as

directed by the Architect / SBIIMS. 10.00 SQ.MT.

3 Dismantling existing plywood /wooden/ aluminium

partition with door manually or by mechanical means &


approved by MCGM including all lead and lift. Complete as

directed by the Architect / SBIIMS.

210.00 SQ.MT.

4 Demolishing existing brick work in cement morter

manually or by mechanical means & carting away

unserviceable material/ debris to a place approved by

MCGM including all lead and lift. Complete as directed by

the Architect / SBIIMS.

10.00 SQ.MT.

5 Dismantling existing wornout/ loose plaster including

raking out joints of brick work & cleaning the surface &


approved by MCGM including all lead and lift. Complete as

directed by the Architect / SBIIMS.

20.00 SQ.MT.

6Demolishing existing R.C.C. / CC Work in Slabs/chajja

not exceeding 125mm thickness at all levels & heights

including cutting & stacking of steel bars as directed

without damaging the building structure & carting away

unserviceable material/ debris to a place approved by

MCGM including all lead and lift. Complete as directed by

the Architect / SBIIMS.10.00 SQ.MT.

SBI INFRA MANAGEMENT SOLUTIONS PVT. LTD.

(A Wholly Owned Subsidiary of SBI)

Ground Floor, Raheja Chamber, Free Press Journal Marg, Nariman Point, Mumbai 400

021

TENDER FOR PROPOSED INTERIOR RENOVATION, FURNISHING &

ELECTRICAL WORKS AT 11/C, 1ST FLOOR, MITTAL TOWER, NARIMAN POINT,

MUMBAI.

(BILL OF QUANTITIES)

of 33 SEAL SIGNATURE OF CONTRACTOR

SR.

NO.


7 SHIFTING & STACKING OF LOOSE / FIXED

FURNITURE

Carefully removing & dismantling of existing loose and

fixed furniture at all height & locations as directed without

causing damages and pack them with necessary packing

material for transit to other places. Rates to include

stacking of such furniture at designated places/ on Ground

Floor using staircase, cleaning afterwards etc including all

lead and lift. complete as directed by the Architect /

SBIIMS.

1 LS

8 DISMANTLING & CARTING AWAY PLUMBING,

DRAINAGE & SANITARYWARE

Dismantling & removing existing G.I., CPVC pipes,

accessories, water supply, sanitary, drainage pipes &

fittings & carting away from the complex as per the rules

and regulations of the Bank. the contractor should take

necessary permission from MCGM or appropriate authority

for dumping the debris any where in Maharashtra including

all lead and lift.. complete as per the direction of the

Architect/SBIIMS.

1.00 LS

ii MASONARY WORK, WATER PROOFING & PLASTER

1 100 mm THICK Autoclaved Aerated Cement Block

masonry

Providing and constructing 100 mm thick AAC concrete

block masonry, Having rough surface to receive the plaster

effectively, blocks conforming to IS 2185 (Part-III) masonry

with approved block laying polymer modified adhesive

mortar per manufacturer’s instructions, including providing

RCC patli beam(Lintel) of 100mm thick at every 1.00m c/c

with 2 nos. 8 mm dia Tor bars and 6 mm dia links at 300

c/c in cement concrete of mix M 20, required formwork

complete with raking out joints, curing, independent double

legged scaffolding as per specifications etc. at heights,

depths and leads as directed by PM to his entire

satisfaction. (Patli beam/ Lintel RCC & Steel will be paid

seperately)..Make- Siporex India, Aerocon, Ultratech

Xtralite

10.00 SQ.MT.

2 PLASTERING

INTERNAL PLASTER : Providing and laying Internal

plaster of average 15 mm thk in in CM 1:4 to walls, ceiling

at all heights including necessary scaffolding curing etc

complete. Rate includes adding polypropylene fibre of

approved quality as per propotion specified in the

manufacturers specifications, chicken mesh, nails, curing

etc complete as directed by the Architect/ SBIIMS.

100.00 SQ.MT.


SR.

NO.


3 POLYMER TREATMENT TO THE STRUCTURES

COLUMNS, BEAMS ETC.

a. Removal of Rust:

Prov. & applying approved rust remover to clean

reinforcement bars & allowing it to react for specified time

& cleaning the reinforcement of total rust by tapping or

using mechanical wire brush around the reinforcement

bars to give it a totally rust free finished steel surface using

suitable tools & equipment.

b. Passivator Coat on Reinforcement :

Prov.& applying one component, polymer modified

cementitious anti-corrosive primer formulated to provide

dual protection of a polymetric barrier & an integral

corrosion-inhibiting system to existing & additional steel

provided before patching of damaged areas, using suitable

tools & equipment & using BASF approved make

chemicals of master Emaco P130/ Fosroc Nitoprime

Zincrich/ Sika Rustoff 100

c. Bond Coat: Providing & applying bond coat on concrete

surface by mixing high dispersion SBR latex like Master

Emaco SBR2 of BASF or Nitobond SBR (latex) of Fosroc

with white cement in the ratio of 2: 3 . The mixing should

be done to a lump free consistency for bond coat & screed

mortar to be applied once the bond coat is tacky.

d. Polymer Modified Mortar (PMM) :

Prov. & repairing the damaged concrete portion with single

component fibre reinforced, duel shrinkage-compensated,

thixotropic, cementitious patch repair mortar as per

manufacture's specifications in thickness of 12mm to

50mm both vertical & overhead depending on site

conditions in layers capable of applying 25mm thk. initially

by hand & finishing with trowel, compacting the same

around bars & finishing in line with existing concrete

surface. The rates are inclusive of Manpower, material &

equipment. The approved brands are Master Emaco S348

of BASF/ Renderoc HB-60 of Fosroc/ Sikadur 41 of Sika.

(The rate of item to be quoted inclusive of a,b,c & d)

20.00 SQ.MT.


SR.

NO.


4 Microconcrete :

Same item as stated in 11-a,b & c shall be executed in

addition to the following specifications.

Providing encasement to columns/beams/pardi etc., with

free flow high strength non shrink micro concrete

M - 35 using single cement micro concrete shrinkage

components added with 100% by weight saturated dry

stone dust. The water cement ratio should be maintained

as per manufacturer's specifications to achieve dense

solid mass. The Micro concrete shall be poured properly in

slurry tight prefixed holding boards formwork, fixed

properly in line, level and in the required size/shape and

well oiled etc. The air bubbles, if any shall be removed by

tapping the boards and removing the same after 24 hours,

curing the micro-concrete thoroughly for 14 Days etc.

complete. The rate shall be inclusive of shuttering,

strutting, curing etc. complete. (Excluding cost

reinforcement). Measurement on the basis of actual

consumption of microconcrete.

Make: Sunanda, Pidilite, Krishna Conchem, BASF etc.

10.00 KG

5 P.C.C.

Providing & Laying average 60 to 75 mm thk. P.C.C.

(1:2:4) for floor levelling and to conceal the raceways for

electric work. Necessary Curing, compacting etc.

complete as directed by the Architect/ SBIIMS. (The

Rates to include the necessary formwork)30.00 CUM

6 WATERPROOFING IN TOILET

Providing waterproofing treatment to Toilet slab including

removing existing damaged waterproofing system & brick

bat coba and clearing site with filling debris in gunny bags

and the same to be carted away from the site as per the

direction. Also making the slab surface thoroughly clean

and treat the slab by laying waterproof material of

approved make (sunanda chemicals, Roff, Dr. Fixit Or

Choksi chemicals) and as per Mfg. Specifications and

provide 50 mm average thickness consisting of 12 mm

thick layer in cement mortar 1:3 with water proofing

compound at the rate of one K.G. per bag of cement as

base constructing and keep water for 2 days for testing

and only after confirming the waterproof treatment is

properly done then only contractor can lay brick bat coba in

cement mortar 1:5 with waterproofing


SR.

NO.


compound at the rate of one K.G. per bag of cement and

having average thickness of 80mm and finished with 20

mm thick cement plaster layer in cement mortar 1:3 with

waterproofing compound at the rate of 1 K.G. per cement

bag, including all lead, lifts and laid to proper slope to drain

off water entirely Including Watta (Half round) at the

junction of wall & slab and work up to a height of 300mm

or as directed and including finishing the top layer of water

proofing treatment in order to fix ceramic tiles and covering

the whole treatment with seven years guarantee, on

requisite stamp paper etc. complete. As directed by

Architect / SBIIMS

20.00 SQ.MT.

iii TILING & GRANITE WORKS

1 VITRIFIED TILE FLOORING

Providing and laying in-position nano polished Vitrified tiles

of approved make and colour, fixing the same over

average 20mm thick CM 1:6 bedding using approved

quality tile adhesive of Bal endura /Roff or equivalent

approved make, uniformly in line and level in approved

design and filling the joints with eppoxy based joint filling

compound of matching shade curing the joints, etc.

complete as per instruction of Engineer in-charge

complete.

Make: Kajaria/Somany/Simpolo or equivalant as per

sample approved by the SBIIMS.

a800 x 800 mm (Thickness 8-10mm as per the

manufactural standard) 350.00 SQ.MT.

b300 X 300 mm for Toilets (anti skid) (Thickness 8 mm as

per the manufactural standard) 20.00 SQ.MT.

2 PANTRY WALL TILING (2100MM HT)

(300X 600 MM tile)

Provide & Fixing Digital Printed glazed Ceramic tiles with

cement mortar (1:3) and joints to be filled with matching

coloured pigment. Provide backing of 20mm thick cement

sand (1:3) fixing in neat cement and complete as per

direction of the Architect/SBIIMS. (Contractor should

understand the pattern & combination of tile pattern in the

drawing or as per direction of Architect/ SBIIMS.)

Make: Kajaria / Somany / Simpolo or equivalant as per

sample approved by the Architect/SBIIMS.

20.00 SQ.MT.

3 TOILET WALL TILING (2100MM HT) (300 X 600 MM

Digital Printed Glazed Ceramic tile)

Refer same specification as mentioned it item no. iii.2

90.00 SQ.MT.


SR.

NO.


4 PANTRY PLATFORM WITH S.S. SINK

Providing and fixing in position Granite Kitchen Platform

with max. 750 mm made out of avearge 20mm thick

approved quality white double marble stone verical

supports (two slabs sanwiched together with Araldite)

placed at specified spacing as per Architectural drawing at

all heights & leads. The top of the platform shall be

provided with 20-25mm thick Kotah Stone base slab

finished from top using approved colour and shade

Leather brown/Jet Black or any other approved shade

average 18mm thick Mirror finish Granite stone slab with

full round moulded edges complete as per sample

approved by the SBIIMS/Architect. Rate to include

providing 50 to 60mm Granite band with full rounded

moulded edges, making cutouts for SS Kitchen sink,

Tapes, Gas pipe, joints treated with Epoxy based joint

filling compound mixed with matching pigment, including

curing, necessary scaffolding etc. complete as per detailed

drawing and site instructions of the Architects/ SBIIMS.

3.00 RMT

5 GRANITE COUNTER FOR WASH BASIN 600MM DEEP

X 900MM LONG

Refer above specification at no.4 without sink 1.00 RMT

6 WINDOW GRANITE FRAME (75MM+150MM)

Providing & fixing 19mm thick Telephone Black Granite As

approved quality, pattern & colour for flush/projected

skirting, wall including metal washer & aeraldite, square

cut top edge, or chamfered and moulding, top edge in

cement mortar 1:3 cement float, machine cutting, leveling,

jointing, filling the joints with neat cement or pigment mixed

with cement, polishing, finishing, curing etc. Complete as

directed by the Architect.

16.00 RMT

7 DOOR GRANITE SILL

(75MM + 150MM + 75MM)

Refer same specification as mentioned In item no. 20 and

complete as directed by the Architect. 41.00 RMT

iv. PLUMBING & SANITARY WARE


SR.

NO.


1 PLUMBING (Executive Toilet, Gents Toilet & Ladies

Toilet)

The supply should be taken from outside main source of

supply pipe.

Supply & erection of Respective Dia. CPVC such as

12mm/19mm (Prince, Astral, Supreme) pipes confirming

to ASTM standard for Raw water system including all

CPVC fittings like tees, elbows, bends, unions,

MTA,coupling, reducer tees, collars,pipe dummy fittings

etc. The work shall include cutting jointing with

CPVC solvent cement pressure testing the joints /

pipeline for 7 kg/sq.cm hydraulic pressure, for 2 hours

etc. making holes, including chasing in existing walls RCC

Pardi with groove cutting machine to required width and

depth, making bores in walls and RCC slabs, making

good the walls and bores in CC or CM 1:3 as applicable

clearing the debris, grouting of concealed pipes with

chicken wire mesh, MS hooks for fixing pipes and

making good the walls and floors. Provide Jaquar make

Stop cock (3 nos.) continental series as selected by the

Architect. Complete as directed by Architect.

3.00

PER

TOILET

2 DRAINAGE FOR EUROPEAN W.C. AND WASH

BASINS, URINALS IN TOILET

32mm, 75 mm, 90 mm, 110 mm, 160 mm (Type A & B)

Providing, fixing, testing and commissioning of UPVC

soil and waste pipe (Prince, Astral, Finolex) confirming

to IS 4985 of PVC quality 6 kg / sq.cm, (under floor/

outside/in wall) including all fittings, like Bends, Tees,

Elbows, Collars, junction, inspection doors, cowls,

offsets, access pipes, jointing with rubber ring /

solvent cement followed by application of leak proof

adhesive like FRP paste, fixed to wall with properly

fabricated MS bracket of suitable size, GI 'U' clamps

with bolts, nuts and GI washers complete, for soil

and waste pipe lines laid in vertical shafts Encasing the

PVC drain pipes with CC 1:2:4 concrete around the

Pipes for Toilet. Providing and fixing Chili Nahani trap as

directed by the Architect/SBIIMS.

75mm over all = 5.00 meter

110mm over all = 5.00 meter

32mm for wash basin = 25 meter

Chili Nahani Trap = 8 nos.

3.00

PER

TOILET


SR.

NO.


3 WASH BASINS IN CGM'S TOILET

Providing & fixing of Wash Basin above Counters Jaquar /

Hindustan (CEFFO STARWHITE)/ Parryware with

following accessories as directed by the Architect.

Jaquar/Kohlar/Hindware Pillar cock self closing system

(F310001) (above counter wash basin)

waste coupling ALD -705,

Bottle Trap ALD-769 300 x 190

PVC Connector ALD 805B

Pillar Cock - CON-021KN,

Angle Cock Con-059KN

Necesssary coordination with electrical contractor for

sensor electrical work to be done as per manufacturers

specification. complete as directed by the

Architect/SBIIMS.1.00 EACH

4 WASH BASINS IN GENTS & LADIES TOILET

Providing & fixing of Wash Basin above Counters Jaquar /

Hindware / Parryware with following accessories as

directed and as per sample approved by the Architect/

SBIIMS.

Jaquar Continental (CNS-WHT-801 ) make size 590 x 420

x 195 with following accessories

Half Pedestal CNS-WHT-801

waste coupling ALD -705,

Bottle Trap ALD-769 300 x 190

PVC Connector ALD 805B

Pillar Cock - PRS-CHR-031

Angle Cock Con-059KN & brackets.

Complete as directed by the Architect/SBIIMS. 5.00 EACH

5 EUROPEAN W.C. SET IN LADIES AND GENTS

TOILETS

Providing and fixing Jaquar (CNS-WHT3535)(365mm x

635mm x 770mm) / Hindware / Parryware Wall Hung

EUROPEAN W.C. with following accessories as

mentioned below.

Cistern, Angle Cock CON-059 KN Jaquarmake

Stop Cock CON-087 KN Jaquar make

PVC connector ACD 805B Jaqar make

2 way Bib Cock CON-041 KN Jaquar make

Jet Spray CHR-593 N. jaquar make


6 EUROPEAN W.C. SET IN CGM'S TOILET

Providing and fixing EUROPEAN W.C. with following

accessories as mentioned below.Jaquar /Atlanta series of

Hindware (Cat. No. 92097) / Parryware Wall Hung with

Cistern,

Angle Cock CON-059 KN Jaquarmake

Stop Cock CON-087 KN Jaquar make

PVC connector ACD 805B Jaqar make

2 way Bib Cock CON-041 KN Jaquar make

Jet Spray CHR-593 N. jaquar make



SR.

NO.


7 ACCESSORIES IN TOILET AND PANTRY

Providing and fixing accessories of Kimberly Clerk / Jaquar

/ Kitsch or as approved by Architect/SBIIMS.

a Soap dispenser with glass bottle of Kimberly

Clerk/Jaquar or equivalent as approved by

Architect/SBIIMS 6 EACH

b

Toilet Roll Holder with Flap

Jaquar/Kimberly Clerk or equivalent as approved by


c

Double Coat Hook

(AKP3576117) of Jaquar or equivalent as approved by


d Multi Fold Paper dispenser

Jaquar/Kimberly Clerk or equivalent as approved by


8 URINAL

Providing and fixing Jaquar URS-WHT. 13261 Urinal with

following accessories as mentioned below.

Waste coupling ALD 705

Flush valve 077 KN (Jaquar / Hindware / Parryware) 2.00 SET

9 URINAL PARTITION

Providing & fixing 350mm x 675mm 19mm thick Granite

double polish with full round molding with polish fixed in

wall as directed by the Architect / SBIIMS. Complete.

2.00 EACH

SUB TOTAL CIVIL WORK (A)

B FURNITURE WORK

a PARTITION WORK

General Specification for Partition

Providing & fixing in position Plywood partitions made of

16 gauge thick 50mm x 38mm aluminium section (Jindal /

Hindalco / Nalco) at 600mm centre to centre framework

of approved quality both ways and the same is covered

with 8mm 303 commercial ply (Green Ecotech / Anchor

Gold / Duromac MR /Century Sainik (on both sides

(duly treated with approved quality Anti termite paint and

fire resistance paint) with necessary cutting for cable tray

for running LAN cable & power cable.

Hardware In Partition

Providing & Fixing Hardware such screw, nails, fastners as

approved by the Architect/SBIIMS)


SR.

NO.


Laminate Finish

Wherever specified provide and fix 1mm premium

Laminate in 2/3 Colours (Royal Touch / Green / Century /

Durian / Aerolam or as approved by the Architect/SBIIMS

as per the colourscheme).

Glass In Partition

Providing and fixing 6mm / 8mm /10mm /12mm Clear

Glass (Saint Gobin / Asahai / Triveni / Sejal / Modi) with

25mm x 12mm T.W. beeding with 1mm laminate, as per

detailed specification given hereunder and as approved by

the Architect/SBIIMS.


Providing & Fixing Hardware such screw, nails, fastners as

approved by the Architect/SBIIMS) as per the direction of

Architect/SBIIMS.

The cost is inclusive of all materials, Scaffolding, labour

etc. complete.

Note: The measurement of the partition will be considered

upto gypsum false ceiling level

1 BOTH SIDE LAMINATE FINISH PARTITION (CGM

CABIN & GM CABIN)68mm Thk.

Refere general specification of partition and complete as

directed by the Architect/SBIIMS. 120.00 SQ.MT.

2 LAMINATE FINISH SEMI GLAZED FULL HT.

PARTITION (68MM THK.)

(Dining) (Both Side 1mm Laminate Finish) (10mm

glass with 3mm LG/ 3M film) from 3'0" to 7'.0" fixed

with 25mm x 12mm beeding finsh in laminate.


directed by the Architect/SBIIMS.

15.00 SQ.MT.

3 MEETING ROOM PARTITION

(Both Side 1mm Laminate Finish)


directed by the Architect/SBIIMS. Provide & Fix 50mm

thick glass wool. Provide and fix 2nos. soft board

2400mm x 600mm with felt cloth as selected by the

Architect. The cost is inclusive of all materials, labour etc.

complete and as per design and drawing given by the

Architect/ SBIIMS. 28.00 SQ.MT.

4 SLIDING FOLDING PARTITION WITH LAMINATE

FINISH (MEETING ROOM)

Providing 2’ 3” frame both & top side providing 35mm thk

flush door be fixed both side 1mm Laminate & fix ½” x 8’

high wood patti to be fixed at thickness of shutter fihish

with 1mm premium laminate. Necessary SLIDING

FOLDING HARDWARE AS APPROVED BY THE


SR.

NO.


ARCHITECT Dorma/Hettich/Hafle/Enox brand OR

EQUIVALENT 44mm x 38mm x 150mm heavy duty hinges

4 nos. to each shutter to be fixed & provide 75mm x

63mm T.W. frame 2510mm high 2 nos. & 3980mm long 1

nos. to be provided & finished with 1mm thk. laminate to

be fixed & providing necessary U channel in top & bottom

of floor in flooring 3980mm long as per design & all six

doors will have conceal handles & long tower bolt as per

design & all the doors finish with laminate in pattern as per

direction of the Architect. (total doors 5 shutters of 965mm

x 2400mm) will be folded at one side. complete as directed

by the Architect/SBIIMS.

12.00 SQ.MT.

5 LOW HT PARTITION 68mm Thk. (Both Side 1mm

Laminate Finish) (1200mm height) For DGM Cubicals

Refere general specification of partition and complete

as directed by the Architect/SBIIMS. Provide and fix soft

board with felt cloth as selected by the Architect and

12mm thick glass BETWEEN 900mm to 1200 mm as per

direction of Architect/ SBIIMS.

25.00 SQ.MT.

6 FULL HEIGHT PARTITION FOR UPS ROOM WITH

DOOR


directed by the Architect/SBIIMS. Providing & fixing in

position Plywood partitions made of 16 gauge thick 50mm

x 50mm aluminium section (Jindal / Hindalco / Nalco) at

600mm centre to centre framework of approved quality

both ways and the same is covered with 12mm thick

calcium silcate Board on both side finish with fire resist

paint on UPS side and other side provide 8mm MR ply

finish with 1mm premium laminate as per generl

specification mentioned above. between the two calcium

silicate board provide and fix 50mm thick 144kg/m3

Rockwool as directed by the Architect/SBIIMS. Including

all necessary brass hardware make of Godrej /Ozone /

Dorma or equivalent approved make, 38mm x 38mm x

152.4mm hinges 3 nos., mortise lock with computerise

key, Door Closer (Dorma / Ozone / Godrej), door stopper

etc. complete as directed by the Architect/SBIIMS.

18.00 SQ.MT.


SR.

NO.


7 MAIN ENTRANCE DOOR (TOUGHENED GLASS) (900 x

1980 mm x 1 nos.)

Providing & fixing Main entrance door made of 12mm thk

toughened glass door with machine edge polish to be fixed

with complete hardware i.e. SS Patch Fittings, 600mm

long SS Door handles, Locks, Floor Springs etc. as

approved by the Architect/ SBIIMS. The cost is inclusive of

approved etching pattern / glass film as per drawing

details. The cost is inclusive of all materials, labour etc.

complete.

(DORSET/ DORMA/ OZONE/GODREJ) for Hardware

(SAINT GOBIN/ MODI/ ASAHI) for Glass

2.50 SQ.MT.

8 LAMINATED FLUSH DOORS

Providing & Fixing Pine wood Marine grade 35mm thk

flush door (Century/Green/ Duro) to be finished with

1mm premium laminate as approved by the Architect

in 2 or 3 colours. provide and fix 8mm thick glass with

3M film as per design pattern with machine edge

polish fixed with 25mm x 6mm beeding finish with

laminate. Including all necessary brass hardware make of

Enox /Ozone /Punit or equivalent approved make,

31.50mm x 31.50mm x 150mm hinges 3 nos., mortise lock

with computerise key, Door Closer (Dorma/Dorset / Ozone

/ Enox), door stopper etc. complete as directed by the

Architect/SBIIMS.

a (900 mm x 2100mm x 40mm thk ) X 3 NOS for CGM, GMs

6.00 SQ.MT.

b LAMINATE FINISH SOLID DOORS

Top Panel Is The Same As Bottom Panel Finish With

1MM Laminate

Refer Same Specification as mentioned in Item no. B-i-8

10. Complete as directed by the Architect/ SBIIMS.

Record Room, Passage, Dining, Passage, (Laminate

Finish) (900 mm x 2100mm x 37mm thk

LADIES TOILET (Main Door)

GENTS TOILET DOOR (LAMINATE FINISH)

3 DOORS. & 1 CGM Toilet Door

24.00 SQ.MT.

c LAMINATE FINISH SEMI GLAZED DOORS

Top Panel 10MM glass between 900mm to 2100mm

fixed with 25mm x 12mm beeding finish with 1mm

laminate. ate

Refer Same Specification as mentioned in Item no. B-i-8.

Complete as directed by the Architect/ SBIIMS.

Dining, (Laminate Finish) (900 mm x 2100mm x 37mm thk

)

2.00 SQ.MT.


SR.

NO.


9 SHUTTERS BELOW COUNTER IN PANTRY

Providing & fixing 19mm Marine plywood shutters duly

finish with 1mm Laminate to be fixed with necessary

adhesive & provide 50MM x 38MM T.W. frame dully finish

with 1mm laminate & provide necessary stainless steel

hardware hinges handle, tower bolt. Complete as

approved & directed by the Architect/SBIIMS.

2.00 SQ.MT.

b TABLES & SIDE TABLES & STORAGES

General Specification for Table & Side Tables

Providing & fixing table and side table made of IS 303

commercial ply (Green Ecotech / Anchor Gold /

Duromac MR /Century Sainik / Prince Premium MR)

For Vertical, Horrizontal, & appron shelves etc. as

directed by Architect/SBIIMS.

18mm Plywood For :

Table top, Verical, Horrizontal, Shelves, Drawer Facia,

Storage unit top, Doors : Table top edge to be 36mm thick.

12mm plywood For

Drawers Verticals, Appron

6mm Plywood For

Drawers bottom & Unit back :

12mm Flexible or 4mm ply in 3 layers For Table Front

apron

BTW wood moulding

provide 38 x 12mm BTC wood moulding finished with

mellamine/PU finish for the table top thickness. complete

as directed.

Laminate Finish

Wherever specified provide and fix in exposed area 1mm

premium Laminate in 2/3 Colours (Royal Touch / Green /

Century / Durian / Timex or as approved by the

Architect/SBIIMS as per the colourscheme). and All

internal area of drawer, storage & table inside area will be

finished in 0.8 mm thk. laminate. as per the

matching/Contrast to laminate as per the direction of the

Architect/SBIIMS.


SR.

NO.


Glass On Table

Providing and fixing 12mm Clear Glass with 1" bevelling

with computerised machine edge polish. (Saint Gobin /

Asahai / Modi) Complete as directed by the

Architect/SBIIMS.


Providing & Fixing Hardware such screw, nails, fastners

(Nettlefold/Omni/Ajanta or as approved by the

Architect/SBIIMS) as per the direction of Architect

/SBIIMS.

Provide necessary brass hardware handles, locks, hinges,

telescopic channel, CPU Trolley, wire manager

(Punit/Dorset/ Ozone/godrej or Equivalent make hardware

as approved by the Architect/SBIIMS) Complete as

directed by the The cost is inclusive of loading unloading of

all materials, Scaffolding, labour etc. complete.Architect/

SBIIMS.

1 LAMINATED FINISH CGM WORKING TABLE WITH

SIDE TABLE

(2100mm x 900mm x 750mm), (1067mm X 450mm X

750mm) Curvilinear table

Provide and making Curvilinear table & Side Unit made as

per general specification of tables & side tables. The table

top / moulding finish with Premium Laminated finish. all

internal area finish with 0.8mm laminate.

1 Ready made key Board Drawer with Telescopic

Channel. Main Table 3 Drawers on Right Side of table and

Side Unit will have 3 Drawers, 3 Openable shutters & one

shelve, Readymade CPU Trolley. Complete as directed by

the Architect/ SBIIMS and as per detailed drawings.

1.00 EACH

2 LAMINATED FINSH GM WORKING TABLE WITH SIDE

TABLE

(1800mm x 900mm x 750mm), (1067 X 450mm X

750mm) Curvilinear table Laminated Finish

Refer Same Specification as mentioned in Item no. B-b-1.


1.00 EACH

3 DGM WORKING TABLE WITH SIDE TABLE

(1800mm x 750mm x 750mm), (1067mm X 450mm X

750mm) x 3nos Laminate Finish

Refer Same Specification as mentioned in Item no. B-b-1 .


3.00 EACH


SR.

NO.


4 RECEPTION COUNTER (1350MM x 750MM x 750MM)

SIDE UNIT(2057 x 381 x750mm) Laminated finish

Refer Same Specification as mentioned in Item no. B-b-1 .

Complete as directed by the Architect/ SBIIMS. provide

19mm x 19mm circular moulding 3 area. Provide & fix

readymade keyboard with telescopic channel & other

necessary hardware. Provide & fix 12mm thk back painted

glass 6" wide 4' 6" long top with S.S. stud. Side Unit will

have 3 drawers, 4 shutters and 2 shelves. Complete as

directed by the Architect/ SBIIMS.

1.00 EACH

5 MEETING TABLE (8' 0" X 4' 0" X 2' 6") x 2

Laminate Finish

Providing 2400mm long 1500mm wide in center & 1200

wide at both ends , & 750mm high executive meeting

table. The bottom pedestal & top made of 35mm thk Pine

block board & bottom legs partition 4 nos. 600mm x

750mm x 38mm high 2 nos at both end 900mm x 750mm

x 38m thk 2 nos and in the center 2100mm long 750mm

high 3 nos to be provided also in the center with 100mm x

38mm B. T.W. 2200mm long 6 nos bottom foot rest & top

100mm x 38mm 2200 long 6 nos. & 63mm x 114mm

Burma teak 300mm long 12 brackets & 63mm high x

25mm B.T.W. facia to be fixed periphery of the table &

38mm x 50mm x 25mm semi circular B. teakwood

moulding to be fixed & below facia decorative carved patti

to be fixed. The below pedestal bottom or top & all T.W.

members to be finished with mellamine polish. All exposed

area finish with 1 mm Laminate in 2 or 3 colour and

internal area finish with 0.8mm Laminate. Completed as

directed by Architect/ SBIIMS.

2.00 EACH

6 DINING COUNTER (600mm WIDE)

The seating dining Counter will be made of 19mm MR ply

frame work supported on M.S. brackets at 600 mm centre

to centre finish with 1mm laminate. provide and fix 19mm

black granite with round moulding with necessary

adhesive. complete as directed by the Architect/SBIIMS.

5.50 RMT

7 LAMINATE FINISH STORAGE (750MM HT & 1200MM

HT.)

CGM & GM'S CABIN (4346 x450 x 750)(3910 x 450 x

750) X 2

Refer Same Specification as mentioned in Item no. B-b-1

& General Specification.

Provide 3 Drawers at 2 ends and remaining area for doors

divided in to equal distance with one shleves in each

campartment. Provide 38mm semicircular /stepped

moulding for top finish with mellamine/PU. Complete as

directed by Architect/SBIIMS. 24.00 SQ.MT.

STORAGE


SR.

NO.


8 LAMINATE FINISH FULL HT. STORAGE (2100mm)

refer same specification as mentioned in item no. B-b-1, b-

7 General Specification. All exposed area finish with

1 mm thick Laminate in 2 or 3 colour and internal area

finish with 0.8mm Laminate. Completed as directed by

Architect/ SBIIMS.

27.00 SQ.MT.

9 ELE. PANEL (1286mm x 450mm x 2400mm)

Providing and fixing Electrical Board Cabinet electrical

panel board area shutter (openable and partly louvered)

made out of 19mm thick BWR grade ply boxing, shutters.

The Board will have 12mm. thk back of BWR grade ply

with 12mm. thk bision board top on all internal surfaces

and 1.0 mm thick laminate finish on front, with app. Colour

polish to external edges brass hinges, handles etc. as per

the details. The shutters should have300mm ht Powder

coated louvers on top and bottom for ventilation. Complete

as directed by the Architect/ SBIIMS.

3.00 SQ.MT.

c PANELLING

1 1mm THICK LAMINATED FINISH WALL/COLUMN

PANELLING IN CGM & GM (2400mm HT)

Providing and fixing at site wooden panelling to make

column 900mm x 900mm centre column and side column

900mm x 600mm made of aluminium frame 50mm x

38mm 16gauge at 600mm centre to centre bothways with

necessary packing of T.w. members to achieve the size of

column. on aluminium frame fix 8mm MR Ply finish with

1mm laminate in 2 or 3 colurs as approved by the

Architect. The cost shall includes applying 2 or more coats

of Antitermite paint to internal surfaces. The Rate includes

all materials, hardware, labours, polishing etc. complete as

per sample approved by the Bank . Complete as directed

by the Architect/ SBIIMS.

172.00 SQ.MT.

d FALSE CEILING

1 MINERAL FIBRE FALSE CEILING

Providing & Fixing MINERAL FIBER False Ceiling

(Acoustical Suspended Ceiling System with Dune Max

(Micro Look) Edge Tiles With Armstrong Silhouette

Exposed Grid.)The tiles should have in module size of 600

X 600 X 20 mm, The tile shall be laid on Armstrong

Silhouette profile grid system with 15mm white flanges

incorporating a 6mm central reveal in white/black colour

and with a web height of 38mm. Silhouette, Main Runners

& Cross Tees to have mitred ends & “birdsmouth” notches

to provide mitred cruciform junctions. The T Sections have

a Galvanizing of 120 grams per M2 & passed through 500

hrs of Salt test. The Tile & Grid system used together

should carry a 15 year warrantee.


SR.

NO.


INSTALLATION: To comprise main runner spaced at

1200mm centres securely fixed to the structural soffit

using Armstrong suspension system (specifications below)

at 1200mm maximum centre. The First/Last Armstrong

suspension system at the end of each main runner should

not be greater than 450mm from the adjacent wall. Flush

fitting 1200mm long cross tees to be interlocked between

main runners at 600mm centre to form 1200 x 600 mm

module. Cut cross tees longer than 600mm require

independent support. 600 x 600mm module to be formed

by fitting 600mm long flush fitting cross tees centrally

between the 1200 mm cross tees. Perimeter trim to be

Armstrong wall angles of size 3000x19x19mm, secured to

walls at 450mm maximum centres.

ARMSTRONG SUSPENSION SYSTEM accessories

manufactured and supplied by Armstrong World Industries

consisting of M6 Anchor Fasteners with Vertical Hangers

made of Galvanised steel of size 26 x 26 x 25 x 1.2mm

with a Galvanised Thickness of 80gsm, A pre Straightened

Hanger wire of dia – 2.50 mm of 1.83 m length., thickness

of 80gsm and a tensile strength of 344-413 MPa, along

with Adjustable hook clips of 0.8mm thick, galvanised

spring steel for 2.68 mm with a minimum pull strength of

110 kg. The adjustable clip also consists of a 3.5 mm

aquiline wire to be used with the main runner. Rates to

include necessary scaffolding. (Measurement shall be

taken of the plan area only) Complete as directed by the

Architect/ SBIIMS.

195.00 SQ.MT

2 GYPSUM FALSE CEILING & BEAM

GYPSUM FALSE CEILING 2743mm LEVEL CEILING

Providing and fixing 12mm thk. Gypsum India board false

ceiling at levels as shown in the drg. From FFL. Rate shall

be inclusive of all Gypsum India components contained

G.I. perimeter channels of size 0.55 thick having one

flange of 20mm and another flange of 30mm and a web of

27mm alongwith perimeter of ceiling, screw fixed to brick

wall / partition with the help of nylon sleeves and screws, at

610mm centres. The suspending G.I. intermediate

channels of size 45mm, 0.9mm thick with two flanges of

15mm each from the soffite at 1220mm centres with

ceiling angle of width 25mm x 10mm x 0.55 thick Fixed to

soffte with G.I. cleat and steel expansion fastners at every

610mm c/c.


SR.

NO.


Ceiling sections of 0.55mm thickness having knurled web

of 51.5mmand two flanges- of 26mm each with lips of

10.5mm are then fixed to intermediate channel with the

help of connecting clip and in direction perpendicular to the

intermediate channel at 457mm centres. 12.5mm tapered

edge Gypboard is then screw fixed to ceiling section with

25mm drywall screws sdriver or drilling machine with

suitable attachment. The boards are to be jointed and

finished so as to have a flush look which includes Filling

and Finishing the tapered and of any vertical ceiling part,

spot, tube light, A. C. Grills, fire and security systems cut

outs including two or more coating approved system

Plastic emulsion paint to give an even shade, All Sections

should adhere to the manufacturers guidelines and

contractor has to submit the Gypsum India certificate on

using the India Gypsum sections & boards. Refer attached

sheet along with drawings for details. Rates to include

necessary scaffolding.(Measurement shall be taken of the

plan area only) Complete as directed by the Architect/

SBIIMS. Square edge of the boards with jointing

compound & joint paper tape. Rate shall be inclusive

225.00 SQ.MT

e PAINTING

1 PLASTIC EMULSION PAINT

Providing & applying plastic emulsion paint of approved

make and shade on walls, columns & ceilings. The rate

shall include scrapping, leveling & preparing the surface,

neccesary scaffolding, labour, material, tools etc. complete

with Primer coat + putty & 3 coats of PE Paint to get evenly

spread quality finish (roller finish) of approved make.


Make:- Asian / Berger/ ICI or approved equivalent make.

197.00 SQ.MT

2 OIL PAINT

Providing & Applying one coat of Red-oxide and two coats

of Synthetic Enamel Paint of given shade to M.S. Grill of

Window. The rate is including scraping old surfacess, cost

of all labour, tools and other incidentals etc. including

scaaffolding. Complete as directed by the Architect/

SBIIMS.

Make:- Asian / Berger/ ICI or approved equivalent make.

202.00 SQ.MT

f MISCELLANEOUS


SR.

NO.


1 ROLLER BLIND

Providing and fixing of Roller blinds (Blackout type) on the

windows at all heights, all materials and labour etc.,

complete in all respects as per directions of Architect

having following specifications : -

i) Composition: Fibre Glass

ii) Thickness: - 0.32mm

iii) Weight: 410 gm/sqm

iv) Degree of Opacity - 100%

Material & Color shade will be as per sample approved by

Architect/SBIIMS. complete as directed by the Architect/

SBIIMS.

Make: M/s Vista, M/s Hunter Douglas, M/s Louverline, M/s

Livin or equivalent as approved by the Architect/SBIIMS.

29.00 SQ.MT.

2 NOTICE BOARD

Providing & fixing soft boards shall be made up of 12mm

th soft board & finished with fabric of approved colour not

less than Rs.150/mtr.The beading/frame 50mm x 25mm

T.W. finsh with 1mm laminate all around the soft board.

Complete as directed by the Architect.3.00 SQ.MT.

3 5MM THICK GLASS PACKING IN EXISTING

ALUMINIUM WINDOW

wherever existing Window A.C. machine is removed

provide 5mm thick clear glass with necessary beading.

Complete as directed by the Architect/SBIIMS.

4.00 SQ.MT.

g Modular Furniture General Specification for Work stations based upon tile

Providing and installing tile based open plan office system

The modular tile based workstation with partition made of following specification.

Panel Structure

t comprises of two types of panels as per thickness, 22.8mm & 52.4mm.

UPRIGHTS & HORIZONTALS (FOR 52.4MM & 22.8MM):

These uprights and horizontals shall be made of aluminum extrusion having

material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated

with epoxy-polyester powder.

Bottom Frame Assembly:

Fabricated bottom frame for 52.4mm shall comprise of L- Channels made of 2mm

thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW

steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together.

This shall be coated with average 50 to 60 micron thickness of epoxy powder

coating. This shall be bolted to the uprights with M6 screws.

Blocks For 52.4mm:

A block for 52.4mm panel’s thickness shall comprise of 38mm thick paper

honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or

fabric on both sides. Particle board framing shall be used on outer boundary of

these blocks as well as intermediately at certain locations forming conduit for

passing cables. These blocks will be located in the middle bands of the panels.


SR.

NO.


Tile Finishes:

• Fabric Magnetic Tiles:

Fabric magnetic tiles shall be fabric upholstered metal tiles in 0.6 mm thick G.I.

Grade O as per IS: 277. The fabrics shall be upholstered with adhesives.

• Fabric Tack Tiles:

Fabric tackable tiles shall be upholstered metal tiles in 0.6mm thick G.I. grade O

as per IS: 277, with P.E. foam in the tile for tackablity. The fabric shall be

upholstered with adhesives.

• Laminated Tiles:

Laminated tiles shall be 9.0 to 9.5 mm thick pre-laminated particle board

conforming to IS: 12823 having all its edges with minimum 0.5 mm thick PVC

edging.

• Post -Laminated Tiles:

Post-laminated tiles shall be made of 8.0 mm thick particle board conforming to

IS: 12823 laminated with 0.6mm thick high pressure laminate on outer side &

0.6mm backing laminate on inner surface and shall be having all its edges with

minimum 0.5 mm thick PVC edging.

• White Board Tiles:

White board tiles shall be made of 8.0 mm thick particle board conforming to IS:

12823 laminated with 0.6mm thick white glossy high pressure laminate on outer

side & 0.6mm backing laminate on inner surface and will be having all its edges

with minimum 0.5 mm thick PVC edging.

• Glass Tiles:

The Glass tiles shall be 4 mm thick toughened clear glass. It shall be fitted onto

both sides of the panel using horizontal and vertical stiffeners made from 0.6 mm

powder coated CRCA steel Grade D as per IS: 513. Glass tiles shall be offered in

Split tile configuration only if the other split tile adjacent to it is not in glass finish.

• Plain Metal Tiles:

Plain Metal tiles shall be powder coated metal tiles in 0.8 mm thick M.S. CRCA

Grade D as per IS: 513.Blocks (FOR 22.8mm PANEL):

The 22.8 mm ‘fin’ panels shall be made of horizontal and vertical uprights. These

uprights and horizontals shall be made of aluminum extrusion having material

AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with

epoxy-polyester powder. The Blocks for the ‘fin’ panels shall be of 16 to 18 mm

thickness in the selected finish.

Tiles For 52.4mm

• Top Tiles:

These tiles shall be slid in to the panels from top before fixing the top horizontal.

These tiles shall be supported from top & bottom side with clips made from PP co

polymer fitted in horizontal extrusion.

• Bottom Tiles:

All bottom tiles shall be press fitted on to the assembly frame of the panel with the

help of snap on clips made of nylon-66 and support clips made from PP polymer.

• Split Tiles For 52.4MM Thick Panel:

These tiles shall be used for offering two different finishes in single panel. Split

tiles shall be offered in Fabric magnetic tiles, Whiteboard tiles, laminated tiles,

Powder coated metal tiles, clear glass & back painted glass tiles.


SR.

NO.


FINISHES:

• Laminate Finish Blocks:

Laminate finish blocks shall be made from 18mm thick particle board (PLT),

cladded with 1mm thk laminate of approved shade.

• Fabric Finish Blocks:

These shall be made from 18mm thick ppb/plb upholstered with 1mm thk

approved shade of fabric using adhesives.

• Whiteboard Blocks:

These shall be made of 16mm thick particle board laminated with 0.6mm thick

white glossy high pressure laminate on both sides and having all its edges with

minimum 0.5 mm thick PVC edging.

• Glass Blocks:

These shall be made of 4mm thick toughened plain glass having diamond polish

edge finish.

• Fabric Tackable Blocks:

These shall be made from 18mm thick PLB battens which hold 3mm MDF in

between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this

assembly shall be upholstered with approved shade of fabric on both sides using

adhesive.

• Metal Finish Blocks:

Metal finish blocks shall be made from two components of 0.8 mm thick M.S.

CRCA Grade D as per IS: 513 powder coated with epoxy polyester finish.

Types of Blocks:

• Top Blocks:

The top most block in the panel shall be the top block of the panel. It shall be

available in fabric, laminate, whiteboard, fabric metal, tackable and clear glass

finishes.

• Split Top Blocks:

Two blocks of different sizes in the top block shall be made up of split blocks.

These blocks shall be available in fabric, laminate, clear glass or whiteboard

finish.

• Intermediate Blocks:

The blocks in the intermediate bands shall be the intermediate blocks which shall

be available in fabric or laminate finish.

• Bottom Blocks:

The lowermost block in the panel shall be the bottom block which shall be in

fabric, metal or laminate finish.

END PANEL 22.8MM (OFF- MODULE FIXING):

This panel shall be used to connect 22.8mm panel and 52.4mm panel at the

center of 22.8mm panel. 52.4mm panel shall be connected to this end panel using

screws through end trim extrusion of 52.4mm panel. The top and intermediate

blocks for this panel shall be in Fabric or laminated finish and the bottom block

can be in Fabric, Laminated or Metal finish only.

Penta Return Screen (22.8mm thick):

This screen can be provided between two adjacent penta work surfaces and shall

be made up of top and bottom screens. These shall be offered in shared

conditions only. These shall be provided in fabric, laminate, whiteboard, metal

fabric, tackable & glass finishes. The finishes shall have the same specification as

mentioned above.


SR.

NO.


Top trim in 52.4mm thick panel shall be press fitted on the horizontal extrusion &

in 22.8mm thick panel it shall be slide fitted with the help of top trim connector

made from PP copolymer 3530 grade.

End trim for 52.4mm thick panel shall be slide fitted with the help of end trim

connector made from 2.0mm thick M.S. CRCA Grade D as per IS: 513. End trim

for 22.8 mm thick panel shall slide with the help of end trim connector made from

nylon-66.

STABILITY Post

End stability post shall be fitted at the end of the free panel, to avoid movement of

freestanding panels. The post shall be made in two parts.

2: Worktop 25 mm thick laminated (with PVC edge band):

Work top shall be made of 25mm thick Plain particle board of interior grade (As

per IS: 12823) as a Substrate. The top shall be laminated with laminate of 0.6 mm

thickness of approved shade as per IS: 2046-1995. Bottom shall have a backing

laminate of 0.6 mm thickness. All the edges of work surface shall be provided with

machine pressed 2 mm thick PVC edge band glued with hotmelt EVA glue.

These joineries will be covered with die cast caps of powder coated aluminium

alloy ADC 12. All the caps shall be press fitted on the respective extrusions.

WORKTOPS:

1: Worktop 25 mm thick prelaminated (with PVC edge band):

Work top shall be made of 25mm thick prelaminated particle board interior grade

(As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm

thickness. All the edges of work surface shall be provided with machine pressed 2

mm thick PVC Edge band glued with hotmelt EVA glue.

Half return screen with frame above work surface 22.8mm thick:

Half return screens shall be offered for visual & physical segregation of

workspace. These shall be available in glass, whiteboard, laminated & fabric

tackable finishes. The specification of the finishes is same as mentioned above.

Aluminum Extrusions:

The top trims and end trims for 52.4 mm & 22.8 mm shall be made from

aluminum extrusion having material AL96063-T6. All kinds of extrusions for 52.4

mm and 22.8 mm shall have average wall thickness of 1.2 mm & having finish of

powder coating.

PANEL Joinery Post:

The panels shall be joined to each other directly with 180O

joinery or with the help

of post to form different layouts. The types available are 90° 2 way, 3 way & 4

way, 120° 2 way, 3way & fin post 2way, 3way & 4way. The panel joinery post shall

be made up of aluminium extrusion having material AL-96063-T6. It shall have

average wall thickness of 1.2mm. It shall be coated with 50 to 60 micron thickness

of epoxy powder coating.

1. The MS post which shall be grouted to the floor with Hilti make anchor bolts.

2. A cover extrusion of aluminium alloy shall cover the grouted MS stability

bracket. The top end of the extrusion shall be covered with a powder coated

aluminum cap.


SR.

NO.


1 Work surface bracket:

Work surface bracket shall be mounted on to the Horizontal extrusion. Work

surface bracket shall be made from 2.0 mm thick CRCA grade D steel as per IS:

513-19. Ribs shall be provided in the bracket for strengthening purpose. All the

work surface are mounted on the work surface brackets.

2 Holder bracket:

Holder bracket shall be made from 2.0 mm thick CRCA grade D steel as per IS:

513-19. It shall slid in between end trim & vertical extrusion, & mounted on work

surface with the help of pop rivet.

Leg Assemblies:

1 Panel Leg Assembly:

2 Single Side Leg Assembly:

The single side legs shall be used for supporting panels & work surface on one

side only. Single side legs shall be fabricated by CO2 welding MS Tube of section

38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of

35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which

shall allow for adjustment of the height by 50mm. this shall be coated with min. 45

micron thickness of epoxy powder coating.

SIDE panels:

Side panel or gable-ends shall be provided as an alternative support for the Work

surfaces. They can be offered in different types to suit the functionality of the

component.

1 Full side panel with bracket

This side panel shall be in 25 mm thick PLT. It shall be mounted with the help of

full gable end bracket (LH and RH options available) made from 1.2 mm thick

M.S. CRCA Grade D as per IS: 513. Bottom tile can be removed if this side panel

is used.

2 Full side panel without bracket

This shall be in 25 mm thick PLT. With gable end brackets to fix them. The

Bottom tile cannot be removed if this panel is used.

Brackets:

There are various brackets used for supporting and fixing together the

components of the system.

For any of above type of Worksurfaces-

3: Worktop 25 mm thick Post formed:

Work top shall be made of 25mm thick Plain particle board (As per IS: 12823) as

a Substrate. The top shall be laminated with laminate of 0.6 mm thickness of

approved shade and glue of PVAC. Bottom shall have a backing laminate of

minimum 0.6 mm thickness. The user side edges of the work top are made in half

round profile with the decorative laminate wrapped around the edge and the other

cut edges are shall be provided with machine pressed 2 mm thick PVC edge band

glued with hotmelt EVA glue.

· Work top shall be mounted onto the partition panels for work stations by means

of cantilever brackets made from 2.0 mm thick CRCA grade D steel as per

IS:513-1994 duly pretreated and powder coated .

· The work surface shall be provided with circular (grommet) cut out of Dia.65mm

as per the requirement, for passing of wires. These cut outs shall be provided with

ABS covers.


SR.

NO.


4 Double Sided Leg For Penta Return Screen:

The double sided leg shall be used for supporting penta work surfaces with 22.8

mm return screens. Double side legs shall be fabricated by CO2 welding vertical

and horizontal MS Tubes of section 38 mm x 25 mm (IS: 7138 ERW Tube) which

shall be fitted with leveler holder MS plate of 34x21x5mm (IS: 2062, 5 mm HR)

over which an M8 Leveler shall be fitted, which shall allow for adjustment of the

height by 50mm. This shall be coated with min. 45 micron thickness of epoxy

powder coating with MS channel 2mm thick grade D as per IS: 513-1994 and

square connector plate.

5 Panel leg (52.4mm panel):

Panel legs shall be fabricated by CO2 welding MS Tube of section 38 mm x 25

mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS:

2062, 5 mm HR) over which an M8 Leveler shall be fitted, The height of the panel

leg will be 126mm. This shall be coated with min. 45 micron thickness of epoxy

powder coating.

6 Panel leg (22.8mm panel):

Panel legs shall be fabricated by CO2 welding MS Tube of section 38 mm x 20

mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS:

2062, 5 mm HR) over which an M8 Leveler shall be fitted, The height of the panel

leg will be 126mm. This shall be coated with min. 45 micron thickness of epoxy

powder coating.

The Linear Return surface shall be provided with circular cut out of Dia.65mm as

per the requirement, for passing of wires. These cut outs shall be provided with

ABS covers.

3 Double Side Leg Assembly:

The double side legs shall be used for supporting panels & work surface on both

sides. Double side legs shall be fabricated by CO2 welding MS Tube of section 38

mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of

35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which

shall allow for adjustment of the height by 50mm and coated with min. 45 micron

thickness of epoxy powder coating.

Work surfaces shall be made of 25mm thick Pre laminated particle board interior

grade of approved shade conforming to IS: 12823. All the edges of work surface

shall be provided with machine pressed 2 mm thick PVC lipping glued with hot

melt EVA glue.

Stiffener For Penta Return Work Surface:

The Penta Return work surface shall be supported by the stiffener. The stiffener

shall be fabricated from 2mm thick CRCA steel (IS: 513), plates of 5 mm & 3 mm

thick HR steel (IS: 2062) & ERW steel tube of size 50X30X1.5 mm welded

together. This stiffener shall connect to panel on one side and to Double Sided

penta return leg on the other side.

Gable end Panel

This panel shall be made of 18mm thick both side Pre laminated particle board of

interior grade of approved shade conforming to IS: 12823. All the edges of panel

shall be provided with machine pressed 2 mm thick PVC lipping glued with hot

melt EVA glue.


SR.

NO.


1 STAFF WORKING TABLE (1350 mm X 750mm X

750mm) WITH KEY BOARD, CPUR TROLLEY &

PEDESTAL x 46 nos (MODULAR WORK STATION

WITH SYSTEM HT. 1220MM)

Back to back 10 Seater 1 no.

Back to Back 12 Seater 1 No.

Back to back 4 seater 1 no.

Back to back 2 seater 1 no.

Linear work stations 3 seater 1 no.



Linear work station 6 seater 1 no.

refer standar specifications as mentioned above.


(Herman Miller, Steelcase, Godrej, HNI)46.00 EACH

2 STAFF WORKING TABLE WITH WITH KEY BOARD,

CPUR TROLLEY & PEDESTAL (1200 mm X 750mm X

750mm) 390mm width x 450mm depth x 577mm ht.) X

4 nos (MODULAR WORK STATION WITH SYSTEM HT.

1220MM)

refer standar specifications as mentioned above.


(Herman Miller, Steelcase, Godrej, HNI) 4.00 EACH

h CHAIRS

Cable DUCT:

Cable duct shall be made from 0.8 mm thick M.S. CRCA Grade D as per IS: 513 -

1994. It is constructed with two parts, one is body & another is cover. It holds the

cables & gives aesthetic appearance by covering all cables entry, which are

moving upward to the panels. Size of Cable duct is 107mm W X 154 mm H X 21

mm D.

Provide powder coated CPU trolley 230mm : 345mm x 226mm x 180mm ht.

made of 1mm thk M.S. CRCA sheet with supports of 0.8mm thk M.S. CRCA

sheet. Providing & fixing Keyboard drawer made of 0.9mm thk CRCA D grade as

per IS513 having size 200mm x 11.8mm single extention as per IS513. Also

provide 0.9mm thk mouse tray either on left or right side as per user.

General Specification for Free standing Pedestal Size 390mm width x

450mm depth x 577mm ht. including the height of caster wheels

The Pedestal Made of 2mm CRCA body shell, Top panel & bottom stiffner

reinforcement member & 1.2mm thk CRCA sheet for drawer front, top panel

brackets & top bottom stiffners. Also 0.8mm thk CRCA sheet for drawers, drawer

inner cover, drawer back cover, front & rear side stiffners & bottom panel. The

entire unit to be welded assembled.

Drawer metal fronts with ABS moulded handles to be provided.

All drawers fitted with double extension presion ball slide. The drawers should be

suitable for Godrej Ezee files or equivalet.

Provide 10 lever cam lock with central RH locking with actuator with lock channel

mechanisum.

The same foam should be covered with leatherite finish. Provide & fix 50mm dia

swivelling lockable castors fitted to the bottom with stiffners. Complete as directed

by the Architect/ SBIIMS.


SR.

NO.


1 Providing & Supplying Office Chairs

The seat & back are made of 1.20cm thick hot pressed

plywood upholstered with fabric and

polyurethane foam together with moulded ABS seat &

back covers. The back foam should be

designed with contoured lumber support for extra comfort

having seat size 51x47 cm and back size 48x68cm

approx. Overall size of the chair Depth 70 cm x width 70

cm x height 106 -

123.5cm seat ht. -44 - 45 cm. The polyurethane foam

should be moulded with density =45 ± 2 kg/m3 and

hardness + 20 ± 2 kg on Hampden machine at 25%

compression. The chair should be provided with a

synchrotilt mechanism which should offer features like

forward tilt, self regulating tilt tension + Manual override, 4

position tilt locking and anti shock back mechanism which

prevents the back rest from

hitting the user when the lock should be released. The

backrest consist of a drop lift mechanism, which can be

adjusted in the range of 6.5 cm and can be locked in 5

steps for the better lumbar support.

The chair should be provided with a gaslift mechanism for

height adjustments. The pedestal should be injection

moulded in black 30% glass filled nylon. The pedestal

should be 60 cm pitch centre dia (70 cm with castors). The

twin wheel castors are injection moulded in black nylon. All

metal components are epoxy polyester powder coated with

dry film thickness of more than 45microns, salt spray test

to withstand more than 1000 hrs, pencil scratch hardness

more than 2H, other tests conforming to Class D,

IS:6005:1970. Polyurethane arm rest & 5 twin wheel extra

smooth castors.

Make: Godrej or approved equivalent.

a For CGM Model : La Sede High Back of Godrej) 1 Nos.

b For GM (Model : Marvel High Back of Godrej) 1 Nos.

c For DGM (Model : Bravo High Back of Godrej) 3 Nos.

dFor Visitors to CGM, GM & DGM (Model : Bravo High

Back of Godrej)12 Nos.

d For Staff (Model : Ventillo Mid Back of Godrej) 51 Nos.

eFor Conference Room (Model : Bravao Mid Back of

Godrej)16 Nos.

4 DINING CHAIRS

Providing the dining chairs of

Godrej/Wipro/Durian/Featherlite make with stainless steel

legs & different colours premould PVC chairs

stackable/non stackable As per the direction of the

Architect/SBIIMS. (Model : Unwind Café Chair of Godrej)

6.00 EACH


SR.

NO.


i BUY BACK OF EXISTING FURNITURE

Contractor Should remove & Buyback all existing

servicable furniture except electrical & A.C. equipments &

cable as per the direction of the Architect/SBIIMS.

LUMSUM

SUB TOTAL FURNISHING WORK (B)

C PART C - ELECTRICAL WORK

1 MAIN PANEL/DB

Supply and Installation of main LT panel, floor mounted,

front operated dead back, totally enclosed vermin proof,

indoor, non drawout, cubicle type power dist. panel

fabricated out of 2mm thick CRCA sheet having gasketed

hinged door on each cubicle, fully powder coated after

seven tank treatment, incorporating horizontal / vertical

sleeved tinned copper busbar complete with all internal

wiring, danger board, two earthing lugs, cable chamber

etc. as required housing below mentioned switchgears /

meters. ( GA diagram of the panel to be got approved from

the Consultant)

1.1 MAIN LT PANEL

a) 1nos. 160A, TPN, MCCB as incomer

b) 3 Nos. 63A TPN MCCB For UPS Incomer + 6A Raw

Power D.B. + 16 A Power Pt.D.B.

c) 2Nos. 125A TPN MCCB For A.C. D.B. & A.P.F.C.

Panel

d) 1Set, TPN, Tinned Copper 200 Amps copper busbars of

size 25mm x 4 mm thick with PVC sleeving

e) 1Set, RYB, LED indicating lamps with resistors and

fuses f. Digital

Load Manager indicating, Voltage, Currents , freq.,

KW,KVA, etc

1 No

1.2 APFC Panel for 45 KVR

4 stage APFC relay with timer for capacitor switching

Apcos capacitor with on/off indication lamp, auto manual

switch, Start/stop push button, suitable capacitor duty

contactor with & TP MCB

15 KVA/1, 10/2, 5/2 Apcos capacitor ( total 45 KVAR) with

on/off indication lamp, auto manual switch, Start/stop push

button, & following TP MCB's & Contactors

40 Amp TP MCB- 1 Nos, 25A T.P. MCB-2 Nos & 16A TP

MCB - 2nos. with 40A TP Contacor- 1no, 25A T.P.

Contactor -2 Nos & 16A T.P. Contactor-2 Nos.

1 No

1.3 DISTRIBUTION BOARDS

Supply, Installation, Testing & Commissioning (S.I.T.C.) Of All Items

described below should be Factory Manufactured & Tested & ISI marked.

Proposed location & route should be as per the drawing. However , if any

obstruction is encountered at site suitable modification may be made as per

site condition.


SR.

NO.


a LIGHTING D.B.

S.I.T.C. of 3 Ph.& N 8 Way Horizontal Distribution Board

with following accessories : 4 Pole 40 A MCB - 1 No as

Incomer & Outgoings --- 30mA 25A D.P. RCCB - 3 Nos

& 6A S.P. "C" Curve MCB's.-18 Nos

1 No

b RAW POWER D.B.

i S.I.T.C. of 3 Ph.& N 12 Way Horizontal Distribution Board

for 6A power points on each Work-Stations with following

accessories : 4 Pole 63 A MCB - 1 No as Incomer &

Outgoings --- 100mA 25A D.P. RCCB - 3 Nos & 6A S.P.

"C" Curve MCB's.-30 Nos ( Two points to be looped on

one MCB & in exceptional case 3 Pts.)

1 No

ii S.I.T.C. of 3 Phase & N 6 Way Horizontal Power Point

D.B. with Following Accessories ---- 4 Pole & 63

A MCB - 1 No as Incomer & 16 A S.P. MCB's - 18

nos for Pantry Equipments /Xerox/ Cabins etc. ( 4No-

pantry+ 2 No each in G.M.& CGM cabin+ 1 each in DGM

cabins , meeting room etc.+ 2 no for Xerox) + Spare 3 No

1 No

c U.P.S. Output D.B.

S.I.T.C. of 3 Ph & N 12 Way Horizontal Distribution Board

with following accessories : 2 Pole 63 A MCB - 1 No as

Incomer & Outgoings --- 6A S.P. "C" Curve MCB's.-10

Nos ( 3 UPS pts to be looped on one MCB & in exceptional

case-4Pts.)

1 No

d A.C. D.B.

S.I.T.C. of 3 Ph. & N 4 Way V.T.P.N. D.B. with following

Accessories for VRF & Split A.C.'s 4 Pole 125A MCCB - 1

No as Incomer & 3 Nos of 4 Pole 63 A MCB's for

VRF units & 2 No 20A S.P. MCB for Window A.C.+ 25A

S.P. MCB for @tr Split in Pantry/Dining)

1 No

e S.I.T.C. of 4 Pole 63A MCB In Metal Box as an UPS

Incomer 1 No

f. S.I.T.C. of 2 Pole 63 A MCB in Metal Box for UPS Output

D.B. control 1 No

1.4 S & I of 160A TPN MCCB in enclosure 1 Nos

S.I.T.C. of Factory ManufacturedSingle/ 3 Phase & Neutral Double Door

Distribution board made out of 16 SWG sheet steel enclosure with cutouts

for operating MCB/MCCB/RCCB etc. knobs & consisting of Phase, Neutral &

E arth Busbars with tapped holes , phase barriers, & covers with removable

plates on Top & bottom for Incoming & Outgoing Cables . D.B.’s shall be

flush mounting type for both single & three phase.

After completion of work the contractor must supply 3 copies of “As-Built”

drawing of actual route & location of items .

All UPS & Raw Power points to be Marked as U1,U2------ & R.P.1, R.P.2 – etc

on each work-Station/Desk etc. Similarly load/points connected on Each

M.C.B. to be indicated with a chart pasted inside the cover of each

Distribution Board.


SR.

NO.


1.5 Lumpsum charges for arranging temporary power supply

and lighting for all the contractor at site including the

required number of tubelight fittings, suffficient number of

plug points with plug tops and including all the necessary

safety devices like ELCB etc. to ensure SAFE &

CONTINUED supply at site.

1 LUMSUM

2.O CABELS / MAINS

2.1 S & I of 1100V grade armoured cable having sector /

circular shaped aluminium / copper conductor PVC

insulated cores, laid up, PVC tape wrappe d inner

sheathed, GI strip / wire armoured and overall extruded

PVC sheathed confirming to IS: 1554, laid on wall / ceiling

using GI clamps & spacers as per route shown at site and

further as directed by Consultant at site in the following

sizes:

2.1.

13-1/2 C x 95 Sq.mm XLPE Armored Al. Cable 40 Mtrs

2.1.

2

3 1/2 X 50 Sq.mm XLPE Armored Al. cable For A.C. D.B.

& A.P.F.C. Panel 20 Mtrs

2.1.

3

4C x 10 Sq.mm Copper Armored Cable for 6 A Raw Power

D.B. & 16A Power Point D.B.'s.40 Mtrs

2.1.

44C x 6 Sq.mm Copper Armored cable for L.D.B. 40 Mtrs

2.2 S & I of end termination of above mentioned cables

including compressed type brass glands, crimping type

copper lugs, insulation tape etc. as 'required complete with

earthing of glands in following sizes

2.2.

14 C x 95 Sq.mm XLPE Ar. Aluminium Cable 2 Nos

2.2.

24 C X 50 Sq.mm. XLPE Ar.Aluminium cable 2 Nos

2.2.

34C x 10 Sq.mm Copper 4 Nos

2.2.

44C x 6 Sq.mm Copper 10 Nos

3.1 Supply & Installation of concealed point wiring using 600v

grade 3x1.5 sqmm copper conductor PVC insulated wires

(with proper R,Y,B color code ) pulled through haevy

gauge PVC conduits laid concealed over false ceiling or in

wall chases including 2x 2.5 sqmm circuit wires from the

relevant DB and also including 2.5 sqmm green color

copper earth wire and provision of grid plate type switches

& sockets as approved by the consultant. Each circuit

feeding not more than 8 points OR 800 watts as per

following configuration

3.1.

1

Primary light points including the cost of 5A switch94 Nos

3.1.

2

Secondary light points looped from the above point38 Nos

3.1.

3

5A plug point as primary point10 Nos


SR.

NO.


3.1.

4

15A Plug Point directly taken from DB for Pantry / zerox /

fridge / power point20 Nos

3.1.

5

Exhaust fan point consisting of 5A socket near fan and

switch on light switch board7 Nos

3.1.

6

S & I of AC point wiring using 20A, SP MCB, box with 20A

metal clad plug-socket with 2 x 4 and 1 no 2.5 sqmm PVC

copper wire in PVC conduit (Pantry)

3 Nos

3.2 S & I of point wiring for UPS or stabilized power plug points

on workstations / table for computers using 3 X 2.5 Sqmm

copper conductor PVC wires pulled through already laid

floor raceways and taken upto table top using PVC rigid or

flexible conduits run within wooden/metal partitions . Each

point consisting of 3 nos of 6A , 5 pin sockets & 1 No 16A

switch wired together forming one point ( MAX FOUR

tables served by one circiut from DB )

60 Nos

3.3 Same as above but 1 no 5A switch socket on raw power (

MAX EIGHT tables served by one circiut from DB ) 65 Nos

4.O FLOOR -RACEWAYS:

4.1 S & I of in-screed floor raceways consisting of 1 Runs x 80

mm x 40mm x 1.6 mm thick heavy gauge rectangular

aluminium anodized pipe sections including chasing and

refilling the trench as per the route shown in the drawing

and approved by consultant at site including clamping &

closing the open pipe ends temporarily by suitable end-

covers against entry of dust or any other foreign material.

30 Mtrs

4.2 S & I of floor junction boxes with top cover for above

raceways , of size 200mm x 200mm x 50mm x 2mm thick ,

fabricated out of M.S. sheetsfully powder coated with

removable screwed cover plates on all four sides for

blocking the entry. One side cover plate having 4 nos. 1'

dia knockouts for flexible conduit outlets as per the

requirement. All the junction boxes to be (with stud)

'properly earth - bonded with the raceways pipe using 12

SWG Copper bare wire as directed at site.

30 Nos

4.3S & I of 25 mm Heavy Duty Grade PVC conduit with

hardware and accessories etc200 Mtrs

5 LIGHTING FIXTURES

5.1 S & I of lighting fixtures with lamps as per the details

below including necessary hardware such as clamos,nuts,

bolts, nails, screws and suspension rods as required for

fixing the fixtures in position as directed by architect /

consultant.

5.1.

1

36 W LED light fixtue Philips Quarda 1 or Crompton or GE

equivalent 37055 Nos

5.1.

2

15W LED Spot Light Fixtures Philips FFREEN LED or

CROMPTON or GE equivalent66 Nos

5.1.

31 X 10/18W LED Patti Tubelight having electronic ballast 4 Nos


SR.

NO.


5.1.

4

250mm dia wall mounted exhaust fan of decorative plastic

body and blade with louvers on the outside7 Nos

6.O EARTHING

6.1 S & I of earth pit comprising of 300mm x 300mm x 3mm

thick copper plate buried at a minimum depth of 2.5 mtr

including necessary materials like charcoal,salt etc as

required conforming to BIS standards having brick

masonary chamber with hinged cover and watering

arrangement

1 Nos

6.2 S & I of earth pit comprising of 600mm x 600mm x 6mm

thick GI buried at a minimum depth of 2.5 mtr including

necessary materials like charcoal,salt etc as required

conforming to BIS standards having brick masonary

chamber with hinged cover and watering arrangement

1 Nos

6.3 S & I of copper /GI earthing wires/strips in following sizes

6.3.

18 SWG copper bare wire 30 Mtrs

6.3.

212 SWG copper bare wire 30 Mtrs

6.3.

325 x 3 mm GI strip 5 Mtrs

6.4 S & I of isolated earthing / grounding system for computers

etc.using insulated green yellow copper earthing wire

laid through 20mm PVC conduits from separately made

earth pit to the equipment in following sizes

6.4.

116 sqmm,cu.,in 20mm PVC conduit 30 Mtrs

7 MUSIC - CUM - PA - SYSTEM

7.1 S & I of point wiring for music - cum PA system comprising

of 2x 1.0 sqmm stranded , copper conductor , flexible PVC

insulated and PVC Sheathed wire pulled through 20 mm

dia PVC heavy gauge conduits and looped from one

speaker to other and to the volume control switch

wherever applicable and finally terminated an tagblock

10 Nos

Sr. No.Particulars QTY Unit

7.2 S & I of 6" dia 6W music speakers to be flushed mounted

on false ceiling similer to Philips LDB8353/10.All speaker

to be equipped with matching transformer for direct

connection to 100v output line

10 Nos

7.3 S & I of volume control - cum - ON - OFF switch flush

mounted on wall along with other electrical switches, The

size and plate of the regulating knob should match with

other switches nearby.

4 Nos

7.4 S & I of Central Music Station comprising of 1 Nos. of

100W Amplifier all inter connected as directed1 Nos

7.5 S & I of CD Player ( Basic cost Rs. 4000/-) 1 Nos


SR.

NO.


8 Smoke Detector System With All Accessories.

8.1 Supply and installation, testing and commissioing of

ionisation type smoke detectors to be mounted below

/Above false ceiling whever required

15 Nos

8.2 Supply, installation, testing and commissioing of response

indicators7 Nos

8.3 Supply, installation, testing and commissioing of manual

call point with break glass arrangement2 No

8.4 Supply, installation and termination of 2x1.5 Sqmm twisted

FRLS armoured copper conductor cable approved by

ETDC/TAC to be clamped neatly on ceiling/ wall/ partitions

etc with GI clamps

200 RMT

8.5 Supply, installation, testing and commissioing of dual tone

electronic hooter2 Nos

8.6 S.I.T.C. of 2 Zone Normal Analogue firealarm panel with

battery backup includiing all accessories. Complete as

directed by the Architect. Ravel/Honeywell or equivalent.1 No

8.7 Supply,installation and testing and commissioning of Auto

Dialler system for the Fire Alarm System with tone and

pulse switch 16X2 LCD display to send the pre recorded

message of 40 to 60 Seconds

1 No

9 NETWORK & TELEPHONE Cabling & Other

Accessories.

9.1 S.I.T.C. of CAT 6 Cable From Network Rack Room To

each Work Station for Data & Voice ( 1No Data Cable + 1

Tel. Cable on each work Stn ).

3200 RMT

9.2 Twin Face Plate CAT 6 Information Outlet unit with in built

RJ 45 Connector inclusive of Cover Plate/box etc.

Complete as directed by the Architect/SBIIMS.

10 Nos

9.3 Single face plate CAT 6 Information Outlet unit with in-

built RJ45 connector to be installed inclusive of Cover

Plate/box etc.

65 Nos

9.4 Providing and fixing RJ 11 with Box. Complete as directed

by the Architect/SBIIMS.65 Nos

9.5 Providing and fixing Twin RJ 11 with Box. Complete as

directed by the Architect/SBIIMS.10 Nos

9.6 S.I.T.C. of Double ended Factory Crimped CAT6

mounting/ Patch cord of 2 metre length 65 Nos

9.7 S.I.T.C. of Double Ended Factory Crimped CAT6

Mounting/Patch Cord of 1 meter length to be used on

Work Station as well as in Network Rack

130 Nos

9.8 S.I.T.C. of 24 U Network Rack with accessories as Fan

A.C. Power Strip etc. 1 Nos

9.9 S.I.T.C. of 24 Port Patch Panels in Network Racks ( 17 no.

in each Rack) 3 Nos

9.10 Termination of CAT6 cables in 24 Port Patch Panels 3 Nos

9.1 testing, labelling, Commissioning of I/O nodes /Scanning

etc.1 LUMSUM

9.12 S.I.T.C. of 100 Pair Jelly Filled armored 0.5 mm cable to

be taken from the Central Telephone/Network Shaft in

Corridor to each of the Network Rooms housing the M.D.F. 40 RMT


SR.

NO.


9.1 S.I.T.C. of 100 terminal Telephone Krone M.D.F. housed

in a Single Door Metallic box. 1 set

11 BUY BACK OF SALVAGE ITEMS1. Carefully Disconnecting , removing all the existing

LIGHT FITTINGS, CABLES, DB'S PANELS, SWITCHES,

BOXES ETC. AS shown by the Architect / Consultant /

Clients representative. The material which was removed

by contractor should quote buy back offer to the Bank after

visiting the site and as per the direction of the Architect/

Consultant / Clients representative.

-1 LUMSUM

SUB TOTAL ELECTICAL WORK (B)


(BILL OF QUANTITIES) SR. PARTICULARS QTY UNIT NO. · granite Sill, chowkhats, holdfasts etc....

Documents

Transcript of (BILL OF QUANTITIES) SR. PARTICULARS QTY UNIT NO. · granite Sill, chowkhats, holdfasts etc....