Big Joe Basic Series

FOR IMMEDIATE DELIVERY CONTACT YOUR LOCAL BIG JOE DEALER

CAPACITY 5500 lbs.

WEIGHT 165 lbs

WHEELS / TIRES STEER—STEEL HUB (2)6.9” x 2.4” polyurethane LOAD—STEEL HUB (2)2.9”” x 3.9” polyurethane STEER ARC 210°

HYDRAULICS Galvanized housing with sturdy construc-tion. Fully sealed hydraulic pump with hard-ened chrome plated lifting piston. Three position hydraulic lever: Lifting, neutral, and lowering. Variable speed low-ering valve allows for controlled placement of product. Handle return spring keeps op-erator handle to vertical position.

FRAME Ridged steel construction. Tapered fork ends reduce damage to pallets. Phenolic “pallet” entry/exit wheels. 2.9” lowered height allows handling of virtually any pal-let. Reinforced C-channel construction helps resist twisting during heavy loads. Durable powder coat paint.

Manual Pallet Truck

PT55

Big Lift LLC Phone: 630-916-2600 Fax: 630-916-0657 www.bigjoeforklifts.com

Certification All units are built to be in compliance with the Occupational Safety & Health Act (OSHA)

Big Lift LLC will not assume liability for injuries or damage arising from, or caused by, the removal of any safety devices from their vehicles by user. Because

of Big Lift LLC policy of continuing product improvements, specifications are subject to change without notice.

© Copyright 2009, Big Lift LLC Lombard, IL 60148 Printed USA 0509

BASIC SERIES

OPTIONAL EQUIPMENT • Four directional • Fork widths-21” • Fork length-36” and 42” • Hand Brake • Low profile-2” collapsed • Nylon Wheels • Scale Trucks • Quick Lift

WARRANTY • 6-months on frame and pump • 90-Days on wheels, axles, bear-

ings and bushings

All around pallet mover used in warehouse, load-ing/unloading trucks and staging work cells.

CAPACITY 3000 lbs.

BATTERY—CHARGER 24-volt industrial battery pack with (2)12V 95AH maintenance free batteries. Match-ing external 8A SCR charger 110VAC plug-in. Minimum battery weight 200 lbs. SPEED Curtis SepEx™ transistor speed control

Variable from 0 mph to 3.66 mph empty Variable from 0 mph to 2.86 mph loaded

WEIGHT 630 lbs with battery

TIRES / WHEELS DRIVE 10” x 2.5” polyurethane LOAD 3.15” x 4.75” polyurethane STABILITY & FORKS 4” Diameter stability caster wheels Phenolic “pallet” entry wheels

HYDRAULICS Heavy duty pump motor with relief valve protects system from overloading.

ELECTRICAL Advanced Curtis drive controller provides smooth step-less acceleration with infi-nitely variable speed control. Anti-rollback feature delivers maximum power when required for uphill or down-hill gradients Fully programmable.

BRAKES Electromagnetic disc brake connected to drive shaft . Adjustable neutral braking, plugging, and regenerating braking are standard. “Dead-man” emergency brake with power cutoff.

CONTROLS Travel lift and lower functions are located in the ergonomic operator handle designed to allow operation with either hand. Wrap around hand guard, reversing switch, dual “butterfly” thumb control, and horn are standard.

TRANSMISSION Durable long life low noise gearbox with Long life precision ground gears.

SERVICEABILITY Removal of one piece power head cover exposes major components for inspection and maintenance. Drive tire can be re-moved with one nut.

STANDARD EQUIPMENT • Curtis Transistor Travel Controller • “Butterfly” Travel Thumb Control • Key Switch and Horn Button • Combo Gauge—Hour Meter with

Battery Discharge Indicator (BDI) • Reversing Switch in Handle • Stability Casters • Pallet “Entry” Wheels

BASIC SERIES

PTE30 Power Pallet Truck

Highly maneuverable motorized hand truck.

A B A B A B36 61 38 63 52 69 5540 61 42 64 54 68 5742 61 44 64 58 69 5848 62 50 64 58 70 6260 63 50 65 69 71 72

Pallet Width

Pallet Length36 42 48

Note: Data shown in inches.Dimensions shown are zero clearance. Add 6-12" for maneuvering.

A - Right Angle StackB - Intersecting Aisle

Gradeability 3

Un-Loaded 7% Loaded 5%

PTE30 3000 Lbs. Capacity Power pallet Truck DIMENSIONS




of the Big Lift LLC of continuing product improvements, specifications are subject to change without notice.

© Copyright 2009, Big Lift LLC, Lombard, IL 60148 Printed USA 0509

CAPACITY 4500 lbs.

BATTERY 24-volt industrial battery or battery pack. Minimum battery weight 480 lbs. AH ca-pacity minimum/maximum 135/255. Bat-tery compartment dimensions are 29.25” x 8.75” x 29” tall. Connector is SB-175 Gray.

SPEED Curtis SepEx™ transistor travel control

Variable from 0 mph to 3.66 mph empty Variable from 0 mph to 2.86 mph loaded

WEIGHT 940 lbs Chassis Only

TIRES DRIVE 10.5” x 5” rubber LOAD 3.15” x 4.75” polyurethane

HYDRAULICS Lift cylinder is hard chrome. Pump unit including motor, gear pump, and solenoid are actuated using a pressure compen-sated lowering valves mounted high in the power compartment for ease of service.

ELECTRICAL Curtis SepEx™ transistor travel controller and separately excited Class H drive mo-tor provide high torque throughout entire drive range. Travel speed remains con-stant relative to throttle position regardless of load on truck. No directional contactors. Master contactor operates with main on/off switch. Automatic resetting circuit breaker and fused circuit protection complete the 24V electrical system.

BRAKES Drum brake is mounted on motor armature shaft multipling the braking power through the double reduction transmission. Brake is applied when control arm is within 12.5” of vertical or 28.7” from horizontal handle position.

CONTROLS Travel, lift, lower functions are located in the ergonomic operator handle, designed to allow operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard.

TRANSMISSION Horizontally mounted drive motor is direct mounted to gear housing. Oil bathed dou-ble reduction helical end spur gear drive train transfers power to axle. Time proven basic design allows for long life and ease of maintenance.

BEARINGS DRIVE WHEEL-Tapered roller bearings sealed in oil bath LOAD WHEELS-Sealed ball bearings TRANSMISSION-MOUNT-Vertical thrust and horizontal tapered load bearings—HD FORK LINKAGE-Self lubricated heat treated bushing no lubrication needed.

ACCESSIBLITY Removal of one piece power head cover exposes major components for inspection and maintenance. Drive tire can be re-moved with one nut.

STANDARD EQUIPMENT • Curtis Transistor Travel Controller • Thumb Control • Key Switch • Horn • Hour Meter BDI Combo Gauge • Reversing Switch • Pallet Entry & Exit Wheels

OPTIONAL EQUIPMENT • Fork Lengths and Fork Widths • Load Backrest • Spring Loaded Stability Casters • (2)12V 135AH Maintenance Free

Battery Pack with Built-In 110VAC Charger

• (4)6V 180AH Maintenance Free Battery Pack with Built-In 110VAC Charger

• (1)24V 255AH Industrial Battery

BASIC SERIES

PTE45 Power Pallet Truck

Low cost motorized pallet truck, ideal for crowded loading docks, work cells and congested aisles.

Loaded Gradeability 10%

A B A B A B36 62 38 67 52 73 5540 62 42 68 54 72 5742 62 44 68 58 73 5848 63 50 68 58 74 6260 64 50 69 69 75 72

Note: Data shown in inches.Dimensions shown are zero clearance. Add 6-12" for maneuvering.

A - Right Angle StackB - Intersect ing Aisle

Pal let W id t h

Pal let Leng t h36 42 48

PTE45 4500 Lbs. Capacity Power pallet Truck DIMENSIONS






CAPACITY 2200 lbs. @ 24” Load Center

BATTERY 12V 125 AH Polycase battery

CHARGER Built-in 12 amp 110 VAC plug

CHASSIS WEIGHT 1064 lbs with battery and charger

PERFORMANCE

TRAVEL Manual

LIFT—ELECTRIC Up to 4.7 ips empty. Up to 4.7 ips loaded—2000 lbs

LOWERING—HYDRAULIC Variable

WHEELS SWIVEL CASTER 7.75” x 2” plastic with guard LOAD 3.75” x 2” plastic

CONTROLS Raise and lower lever located in front of operator. Provides fixed lifting speed and variable lowering speed.

Ergonomic operator mast handles and spring-loaded steer handle with positive steer “tracking” caster wheel. Slip resis-tant foot actuated floor lock for secure grip while parked. Key lock to prevent unau-thorized use of truck.

HYDRAULICS Heavy duty lift motor, pump, and control valve. Built in relief valve protects system form overloading. Pressure compensating flow control valve at base of telescopic models regulates lower speed. Hydraulic reservoir with filter prevents foreign mate-rial from entering the system

Narrow aisle straddle stacker, work table, loading/unloading in tight material handling applications. Powered lift—manual travel.

M22 Manual Straddle Truck BASIC SERIES

ELECTRICAL On/Off key switch, charger amp meter, easy access battery compartment with in-tegral 12-amp charger are standard. Con-trol circuits are fuse-protected with auto reset circuit breaker; plug-in type connec-tors.

FRAME AND MAST All steel construction welded rigid steel chassis for distortion free life. Adjustable forks on pin style carriage. Forks are ad-justable from 8” ID to 31” OD. Standard fork is 42” long x 3.5” wide x 1.25” thick

High visibility mast with I-beam construc-tion, dual lifting chains, and heavy duty mast rollers. Wire mesh safety guard to help protect the operator from chains and lift cylinder. Chrome plated lift cylinder rod provides smooth lift/lower operation and long life.

Straddle legs are made from heavy gauge steel plate with end contoured around load wheel. Flush mounted wheel axles to pre-vent damage. Three position adjustment allow for preset outrigger dimensions for various size pallets.

Inside Dimension (ID): 42.5”, 48”, 53.5” Outside Dimension (OD): 50.5”, 56”, 61.5”

SERVICEABILITY One piece door cover exposes major com-ponents for inspection and maintenance. Built 110 VAC charger cord and battery.

STANDARD EQUIPMENT • Adjustable fork carriage • Amp meter • Caster foot guard • Key switch • 120 amp hour battery • Integral 12 amp charger • Foot actuated floor lock • Pallet forks • Positive steer tracking caster • Spring loaded steer handle

Length ID OD ID OD Length WidthA B C E F G H

M22-63 63 79.1 79.5 27.25 42.5, 48, 53.5 50.5, 56, 61.5 7 31 36, 42, 48 3.5 920

M22-98 98 71.5 117 27.25 42.5, 48, 53.5 50.5, 56, 61.5 7 31 36, 42, 48 3.5 1030 M22-118 118 81.25 137 27.25 42.5, 48, 53.5 50.5, 56, 61.5 7 31 36, 42, 48 3.5 1290

Ship Weight

Col. Height

Ext. HeightModel #

2200 lbs. @ 24" Load Center, Telescopic Mast

Adjustable Straddle Legs Pin Style Forks CarriageLift Height

2200 lbs. @ 24" Load Center, Non-Telescopic Mast

Manual Straddle Truck Adjustable Fork Carriage M22 DIMENSIONS






Face of fork to center of load wheel 2

2

42” long forks are standard, optional fork size will extend lead time 3

3

1.25”

1.75”

4”

B

A

C

E F H

Turning Radius 49”

Free Lift: 0”

G

36" 40" 42" 48"

36" 62" 62" 62" 63"

42" 62" 62" 63" 63"

48" 66" 67" 68" 70"

Load WidthLoad Length

Right Angle Stacking Aisle Width

• Aisle dimensions listed have zero clearance • Add 6” for ease of use • Minimum beam length 96”

CAPACITY 3000 lbs. to 3500 lbs. at 24” load center

BATTERY 24-volt industrial battery. Minimum battery weight 490 lbs. Amp hour capacity 195. Battery compartment dimensions are: 31” x 10” x 21” tall, no cover. Connector is 175 Gray—A22

CHARGER External automatic smart charger. Input: 40A 120VAC-1Ø-60hz.

PERFORMANCE Curtis SepEx® transistor travel control. Gradeability 12% - loaded.

TRAVEL Variable from 0 mph to 3.5 mph empty Variable from 0 mph to 3.0 mph loaded

LIFT Up to 34 fpm empty. Up to 24 fpm loaded—2000 lbs

LOWERING Up to 28 fpm empty. Up to 56 fpm loaded—2000 lbs

CHASSIS WEIGHT 3129 lbs with battery

WHEELS DRIVE WHEEL 10” x 3” rubber STABILITY WHEELS 6” x 2” rubber TANDEM LOAD WHEELS 3.5” x 2.75” polyurethane

CONTROL HANDLE

Protective wraparound hand guard, horn, “Belly Button” reversing switch, thumb travel control are all standard. Handle mounted lift/lower buttons allow uncompli-cated and precise load placement. Brak-ing at top and bottom of the handle work-ing range.

HYDRAULICS

Premium design side mounted mast lift cylinders provides smooth lifting. Full sys-tem filtration prevents contaminants from entering the hydraulic system. 24V 3.0kw lift pump motor is designed for peak effi-ciency at lifting torque.

ELECTRICAL Curtis SepEx® transistor travel controller provides infinitely variable travel speeds with efficient use of battery power. Control circuits are fuse-protected with auto reset circuit breaker; plug-in type connectors.

DRIVE UNIT AND BRAKES Compact 24V 1.35kw drive motor provides ample torque at low current and tempera-ture levels.

Regenerative “neutral braking” allows for controlled downhill travel while reducing heat build-up extending motor brush life. Drive motor, transmission, electric brake and drive wheel are positively coupled to the control arm, providing operator direct control of all drive functions.

The entire drive system is mounted within the truck frame for maximum protection. Offset drive wheel with stability caster as-sembly allow for easy steering.

FRAME AND MAST Adjustable straddle legs allow for preset outrigger dimensions for various sized pal-lets:

Inside Dimension (ID): 38”, 44”, 50” Outside Dimension (ID): 46”, 52”, 58”

Wire mesh safety screen, 47” tall load back rest. Class II ITA fork carriage. Forks are adjustable: 8” ID to 31” OD

High visibility mast design nested two stage I-beam construction with lift cylin-ders positioned in outer I-beam for best view through mast.

SERVICEABILITY Removable two piece power head cover exposes major components for inspection and service. Battery compartment includes flip top cover, removable side panels, and battery compartment rollers for ease of maintenance.

STANDARD EQUIPMENT • Adjustable straddle legs • Battery discharge indicator (BDI) • Key switch • Hour meter • Industrial battery • ITA Class II fork carriage • Load backrest (LBR) 47” tall • Lift lock out • Remote lift/lower buttons in handle

S30/35 Power Drive Straddle Trucks

A short turning radius make it an excellent choice for narrow aisles, storage rooms, or street level loading areas.

BASIC SERIES

Length ID OD ID OD Length WidthA B C E F G H

S30-130 130 83.0 176 32 38, 44, 50 46, 52, 58 8 31 36, 42, 48 4 2966 S30-142 142 92.0 189 32 38, 44, 50 46, 52, 58 8 31 36, 42, 48 4 3049 S30-157 157 100.0 205 32 38, 44, 50 46, 52, 58 8 31 36, 42, 48 4 3018

S35-130 130 83.0 176 32 38, 44, 50 46, 52, 58 8 31 36, 42, 48 4 3006 S35-142 142 92.0 189 32 38, 44, 50 46, 52, 58 8 31 36, 42, 48 4 3089 S35-157 157 100.0 205 32 38, 44, 50 46, 52, 58 8 31 36, 42, 48 4 3129

3500 Capacity @ 24" Load Center, Telescopic Mast

Lift Height

Col Height

Ship Weight with Battery &

Charger

ITA Class I I Fork CarriageModel #

Adjustable Straddle Legs

3000 Capacity @ 24" Load Center, Telescopic Mast

Ext Height

36" 40" 42" 48"

36" 70" 71" 72" 74"

42" 70" 71" 72" 74"

48" 70" 71" 72" 74"

Load WidthLoad Length

Face of fork to center of first load wheel

S30/35 DIMENSIONS




of the Big Lift LLC policy of continuing product improvements, specifications are subject to change without notice.


Power Drive Straddle Stackers

Right Angle Stacking Aisle Width

2

S30 Capacity 3000 lbs. S35

Capacity 3500 lbs.

Note: Aisle dimensions listed assume the bay width to be straddle OD plus 2” (1” on each either side of straddle leg).

• Aisle dimensions listed have zero clearance • Add 12” for ease of use

17” F H

2

G

E

32” 29”

34”

A

1.75”

B

50.5” Wheel Base

61”

30”

47”

Turning Radius 59”

20”

Class II ITA Fork Carriage

4”

M (LB) (LB)

3000 3500

1300 2200

2600

3000

1750

2600

118 130 142 157 142 130 118 157

Free Lift: 0”

CAPACITY 2200 lbs. at 24” load center

BATTERY 24-volt industrial battery. Minimum battery weight 490 lbs. Amp hour capacity 195. Battery compartment dimensions are: 31” x 10” x 21” tall, no cover. Connector is 175 Gray—A22

CHARGER External automatic smart charger. Input: 40A 120VAC-1Ø-60hz.

PERFORMANCE Curtis SepEx® transistor travel control. Gradeability 12% - loaded.

TRAVEL Variable from 0 mph to 3.5 mph empty Variable from 0 mph to 3.0 mph loaded

LIFT Up to 34 fpm empty. Up to 24 fpm loaded—2000 lbs

LOWERING Up to 28 fpm empty. Up to 56 fpm loaded—2000 lbs

CHASSIS WEIGHT 4038 lbs with battery

WHEELS DRIVE WHEEL 10” x 3” rubber STABILITY WHEEL 6” x 2” rubber LOAD WHEELS 6” x 3” polyurethane

CONTROL HANDLE

Protective wraparound hand guard, horn, “Belly Button” reversing switch, thumb travel control are all standard. Handle mounted lift/lower/tilt buttons allow un-complicated and precise load placement. Braking at top and bottom of the handle working range.

HYDRAULICS

Premium design side mounted mast lift cylinders provides smooth lifting. Full sys-tem filtration prevents contaminants from entering the hydraulic system. 24V 3.0kw lift pump motor is designed for peak effi-ciency at lifting torque.

C22 Power Drive Counterbalanced BASIC SERIES

Walkie version of the sit-down rider lift truck makes it an ideal choice for manufacturing work cells and handling a variety of load sizes.

ELECTRICAL Curtis SepEx® transistor travel controller provides infinitely variable travel speeds with efficient use of battery power. Control circuits are fuse-protected with auto reset circuit breaker; plug-in type connectors.

DRIVE UNIT AND BRAKES Compact 24V 1.35kw drive motor provides ample torque at low current and tempera-ture levels.

Regenerative “neutral braking” allows for controlled downhill travel while reducing heat build-up extending motor brush life. Drive motor, transmission, electric brake and drive wheel are positively coupled to the control arm, providing operator direct control of all drive functions.

The entire drive system is mounted within the truck frame for maximum protection. Offset drive wheel with stability caster as-sembly allow for easy steering.

FRAME AND MAST All steel construction. Forward tilt 3° back tilt 6° . Wire mesh safety screen, 47” tall load back rest. Class II ITA fork carriage. Forks are adjustable: 8” ID to 22.3” OD.

High visibility mast design nested two stage I-beam construction with lift cylin-ders positioned in outer I-beam location for best view through mast.

SERVICEABILITY Removable two piece power head cover exposes major components for inspection and service. Battery compartment includes flip top cover, removable side panels, and battery compartment rollers for ease of maintenance.

STANDARD EQUIPMENT • Battery discharge indicator (BDI) • Key switch • Hour meter • Industrial battery • ITA Class II fork carriage • Load backrest (LBR) 47” tall • Lift lock out • Remote lift/lower/tilt buttons in

handle

C22 DIMENSIONS



of Big Lift LLC policy of continuing product improvements, specifications are subject to change without notice.


Power Drive Counterbalanced Stackers

Load Capacity Chart 130” Lift Height

24” Load Center

C22-130

B A B A B A57" 42" 93" 48" 99" 54" 105"

57" 42" 93" 48" 99" 54" 105"

T ruck Length

Load Size

36" x 36" 42" x 42" 48" x 48"

Right Angle Stacking Requirements

A = Aisle B = Bay

• Aisle dimensions listed have zero clearance • Add 12” for ease of use

ID OD Length WidthA B C D E F G

C22-118 118 56 152.0 8 22.3 36, 42, 48 4 3938 C22-130 130 85 162.5 8 22.3 36, 42, 48 4 4038

2200 lbs Capacity @ 24" Load Center, Telescopic Mast

Model # Ship Weight

ITA Class I I Fork CarriageLift Height

Col Height

Ext Height

A

B

4000 lbs.

3000 lbs.

2200 lbs.

1000 lbs.

0 10 20 30 40 50



A

C

B

Turning Radius: 65.7”

61”

34”

33.5”

48”

57”

3°

6°

E

D

Free Lift: 0”

1.75”

G Gradeability 12% - loaded

Big Joe Basic Series

Business

Transcript of Big Joe Basic Series