(BIDDER NEED TO QUOTE PRICE’ IN PRICED SOR) · ENGINEERS INDIA LTD Date Bidder's ... ENGINEERING...
-
Upload
hoangkhanh -
Category
Documents
-
view
212 -
download
0
Transcript of (BIDDER NEED TO QUOTE PRICE’ IN PRICED SOR) · ENGINEERS INDIA LTD Date Bidder's ... ENGINEERING...
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in thelimited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTD
Date Bidder'sSignature
Bidder'sStamp Div.:
Mechanical Works
Schedule of Ratesfor
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
TenderName
BALANCE INSULATION WORKS ATLAKWA
REV DATE PURPOSE BY CHECKED APPROVED
PipingDept.:ENGINEERING 1SHEET OF
06907-11-16-43-MH-SOR-3070-0
SCHEDULE OF RATES Rev
0 MI
NEW DELHI
6907-11-16-43-MH-T-3070Tender No. 0Part
27
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
2SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLDLINES :- Supply, shaping, positioning and fixing of coldline supports as per EIL pipe support standard having thefollowing specifications: Wood specification: Hard wood,chemically treated with creosote under pressure. Qualityof wood to conform class-I durability as per IS-3629 &Grade-I timber of Group-A with permissible compressionstrength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6" NB :200 kg/cm3 Density for lines above 6" NB : 300 kg/cm3
WOODEN BLOCKS
HIGH DENSITY (200 Kg/Cu.M) PUF BLOCKS
HIGH DENSITY (300 Kg/Cu.M) PUF BLOCKS
WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLDLINES :- (PUF MATERIAL SUPPLIED BY OWNER)Shaping, positioning and fixing of coldline supports as per EIL pipe support standard having thefollowing specifications:Wood Specification: Hard wood,chemically treated with creosote under pressure. Qualityof wood to conform class-I durability as per IS-3629 &Grade-I timber of Group-A with permissible compressionstrength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6" NB :200 kg/cm3 Density for lines above 6" NB : 300 kg/cm3
HIGH DENSITY (200 Kg/Cu.M) PUF BLOCKS
HIGH DENSITY (300 Kg/Cu.M) PUF BLOCKS
PAINTING (UNITS):- Supply of Primer and Paint,preparation of surfaces/ Rubdown and application ofprimer and finish paint for touch-up work whereeveridentified for application by Engineer-in-Charge, Providing
1
2
3
4
5
6
7
8
9
M12800000000
M12801000000
M12802000000
M12803000000
M19900000000
M19901000000
M19902000000
M30000000000
M39900000000
Cu. M
Cu. M
Cu. M
Cu. M
Cu. M
0.01
2
10
3
1
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
3SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
scaffolding for all heights, labour, material, tools andtackles, consumables supervision etc. to complete thework in all respects as per drawings and direction ofEngineer-in-Charge for insulated piping as specifiedincluding all pipes, fittings, flanges, valves etc.
PAINTING UNDER INSULATION FOR INSULATEDSURFACES FOR 'CORROSIVE' ENVIRONMENT ASPER JOB SPEC 6907-0642-PT-L07, REV 0 FORCS/LTCS/AS PIPING.
DESIGN TEMP GROUP: -45 TO 125 (DEG C)
DESIGN TEMP GROUP: 126 TO 400 (DEG C)
PAINTING UNDER INSULATION FOR INSULATEDSURFACES FOR 'CORROSIVE' ENVIRONMENT ASPER JOB SPEC 6907-0642-PT-L07, REV 0 FOR SSPIPING.
DESIGN TEMP GROUP: Below 0 (DEG C) toall minus temperature
*************************************************************** LEGENDS / NOTES FOR INSULATION WORKS***************************************************************** Types of Insulation :
IH = Insulation for Heat Coservation IT = Insulation for Steam Traced Lines IS = Insualtion for Personal safety IC = Cold Insulation for Anti-condensation IE = Insulation for Electrically traced lines
** Basic Line Surface Materials :
CS = Carbon Steel (Including LT Carbon Steel) AS = Alloy Steel
10
11
12
13
14
15
M39901000000
M39901001000
M39901002000
M39902000000
M39902001000
M5**********
Sq. M
Sq. M
Sq. M
391
339
82
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
4SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
SS = Stainless Steel
** Notes :
1. For insulation type IT, tracer size and tracer numbersshall be as per specification.
2. Insulation thickness for IC where insulation material isPoly Urethane foam (PUF) / Poly Isocyanurate (PIC) +Cellular Glass includes outer layer of 50mm of CellularGlass and inner layer of balance thickness of PUF/PIC
3. Insulation for IE consists of Inner layer of Rockwooland Outer layer of PUF/ PIC. The thickness have beenspecified as Thk (I) and Thk (O) for inner and outer layersrespectively.
4. For Hot Insulation applicable EIL specification is 6-44-0002 and its addendum***************************************************************
HOT INSULATION (UNITS) ; Providing thermal insulationincluding supply of all insulating and ancillary materials,vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required, including transportation ofmaterials to work site, duly inspected by 3rd partyinspector(Llyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspectionat site by EIL Construction inspector, applying insulationon surfaces as specified including all preparatory workthere on, binding, tying, lacing, stitching and/or otherwisesecuring , finishing with sheet cladding as per spec. ,providing bolts, rivets, and self tapping screws whereverspecified , providing inspection windows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,
16 M50000000000
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
5SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)
INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL
PIPES
NB 0.750 INCHES; THICKNESS 35 MM
NB 1.000 INCHES; THICKNESS 35 MM
NB 6.000 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 100 MM
NB12.000 INCHES; THICKNESS 100 MM
BLIND FLANGE ASSEMBLIES
NB 1.000 INCHES; THICKNESS 25 MM
NB 1.500 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 35 MM
NB 6.000 INCHES; THICKNESS 25 MM
VALVE ASSEMBLIES
NB 8.000 INCHES; THICKNESS 100 MM
NB12.000 INCHES; THICKNESS 100 MM
INSULATION TYPE : IH; SURFACE MATERIAL : CS &
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
M50100000000
M50101000000
M50101010000
M50101010507
M50101010607
M50101011505
M50101011605
M50101011620
M50101011820
M50101030000
M50101030605
M50101030805
M50101030907
M50101031505
M50101040000
M50101041620
M50101041820
M50102000000
Metres
Metres
Metres
Metres
Metres
Metres
NOs
NOs
NOs
NOs
NOs
NOs
20
245
20
5
30
10
1
2
1
2
2
8
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
6SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL
PIPES
NB 0.500 INCHES; THICKNESS 55 MM
NB 0.750 INCHES; THICKNESS 45 MM
NB 0.750 INCHES; THICKNESS 50 MM
NB 0.750 INCHES; THICKNESS 55 MM
NB 0.750 INCHES; THICKNESS 60 MM
NB 1.000 INCHES; THICKNESS 35 MM
NB 1.000 INCHES; THICKNESS 55 MM
NB 1.500 INCHES; THICKNESS 55 MM
NB 2.000 INCHES; THICKNESS 35 MM
NB 2.000 INCHES; THICKNESS 45 MM
NB 2.000 INCHES; THICKNESS 50 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 55 MM
NB 3.000 INCHES; THICKNESS 60 MM
NB 4.000 INCHES; THICKNESS 45 MM
NB 6.000 INCHES; THICKNESS 30 MM
NB 6.000 INCHES; THICKNESS 40 MM
NB 6.000 INCHES; THICKNESS 55 MM
NB 8.000 INCHES; THICKNESS 30 MM
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
M50102010000
M50102010411
M50102010509
M50102010510
M50102010511
M50102010512
M50102010607
M50102010611
M50102010811
M50102010907
M50102010909
M50102010910
M50102011106
M50102011111
M50102011112
M50102011309
M50102011506
M50102011508
M50102011511
M50102011606
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
5
5
25
10
15
55
90
210
5
75
15
5
230
5
25
20
240
15
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
7SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 8.000 INCHES; THICKNESS 45 MM
NB 8.000 INCHES; THICKNESS 60 MM
NB10.000 INCHES; THICKNESS 45 MM
NB16.000 INCHES; THICKNESS 30 MM
NB16.000 INCHES; THICKNESS 100 MM
NB16.000 INCHES; THICKNESS 150 MM
BLIND FLANGE ASSEMBLIES
NB 1.500 INCHES; THICKNESS 45 MM
NB 2.000 INCHES; THICKNESS 25 MM
NB 3.000 INCHES; THICKNESS 55 MM
NB 3.000 INCHES; THICKNESS 60 MM
NB 6.000 INCHES; THICKNESS 55 MM
VALVE ASSEMBLIES
NB16.000 INCHES; THICKNESS 150 MM
INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL
PIPES
NB 0.500 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 25 MM
NB 1.000 INCHES; THICKNESS 25 MM
NB 1.500 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 50 MM
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
M50102011609
M50102011612
M50102011709
M50102012006
M50102012020
M50102012030
M50102030000
M50102030809
M50102030905
M50102031111
M50102031112
M50102031511
M50102040000
M50102042030
M50133000000
M50133010000
M50133010405
M50133010505
M50133010605
M50133010805
M50133010910
Metres
Metres
Metres
Metres
Metres
Metres
NOs
NOs
NOs
NOs
NOs
NOs
Metres
Metres
Metres
Metres
Metres
30
5
10
5
5
220
1
2
6
3
3
10
5
10
20
5
60
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
8SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 4.000 INCHES; THICKNESS 25 MM
NB 6.000 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 25 MM
NB10.000 INCHES; THICKNESS 25 MM
NB12.000 INCHES; THICKNESS 25 MM
NB12.000 INCHES; THICKNESS 100 MM
NB12.000 INCHES; THICKNESS 150 MM
NB18.000 INCHES; THICKNESS 25 MM
FLANGE ASSEMBLIES
NB 1.500 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 25 MM
BLIND FLANGE ASSEMBLIES
NB 2.000 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 25 MM
VALVE ASSEMBLIES
NB 1.000 INCHES; THICKNESS 25 MM
NB 1.500 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 50 MM
NB 3.000 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 25 MM
NB 6.000 INCHES; THICKNESS 25 MM
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
M50133011305
M50133011505
M50133011605
M50133011705
M50133011805
M50133011820
M50133011830
M50133012105
M50133020000
M50133020805
M50133021305
M50133030000
M50133030905
M50133031305
M50133040000
M50133040605
M50133040805
M50133040905
M50133040910
M50133041105
M50133041305
M50133041505
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
45
15
50
95
30
20
45
40
2
5
1
1
4
2
47
20
18
8
2
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
9SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB18.000 INCHES; THICKNESS 25 MM
INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL
PIPES
NB16.000 INCHES; THICKNESS 65 MM
NB16.000 INCHES; THICKNESS 150 MM
INSULATION TYPE : IH; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL
PIPES
NB 0.750 INCHES; THICKNESS 25 MM
NB 1.000 INCHES; THICKNESS 25 MM
NB 6.000 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 25 MM
INSULATION TYPE : IS; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL
PIPES
NB 1.500 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 25 MM
FLANGE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 25 MM
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
M50133042105
M50134000000
M50134010000
M50134012013
M50134012030
M55100000000
M55109000000
M55109010000
M55109010505
M55109010605
M55109011505
M55109011605
M55141000000
M55141010000
M55141010805
M55141011605
M55141020000
M55141020505
NOs
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
NOs
1
10
30
5
5
90
5
5
30
1
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
10SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 8.000 INCHES; THICKNESS 25 MM
VALVE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 25 MM
NB 1.000 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 25 MM
HOT INSULATION (UNITS) ; (INSULATION MATERIALSUPPLIED BY OWNER)Providing thermal insulation excluding supply of insulationmaterial which shall be supplied by owner but includingsupply of all ancillary materials, vapour barrier, weatherprotective coverings, consumables and other necessarymaterials , testing of materials as required, includingtransportation of materials to work site, duly inspected by3rd party inspector(Llyods/BV/DNV or any other Clientapproved party) at manufacturer's shop & Samplecheck/inspection at site by EIL Construction inspector,applying insulation on surfaces as specified including allpreparatory work there on, binding, tying, lacing, stitchingand/or therwise securing , finishing with sheet claddingas per spec. , providing bolts, rivets, and self tappingscrews wherever specified , providing inspectionwindows, end seals forflanges etc., colour coding and identification. Providingsteel scaffolding, all tools , tackles , equipments etc. ,labour, supervision and completing the work in allrespect, at all heights as per drawings , specifications andinstructions of Engineer-in-charge. (Refer Legend forapplicable EIL specification)
INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL
116
117
118
119
120
121
122
123
M55141021605
M55141040000
M55141040505
M55141040605
M55141040905
M55141041605
M59900000000
M59902000000
NOs
NOs
NOs
NOs
NOs
1
7
1
1
1
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
11SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
PIPES
NB 0.750 INCHES; THICKNESS 25MM
NB 1.000 INCHES; THICKNESS 25MM
NB 1.500 INCHES; THICKNESS 25MM
NB 1.500 INCHES; THICKNESS 35MM
NB 2.000 INCHES; THICKNESS 25MM
NB 2.000 INCHES; THICKNESS 35MM
NB 3.000 INCHES; THICKNESS 25MM
NB 4.000 INCHES; THICKNESS 25MM
NB 12.000 INCHES; THICKNESS 25MM
INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL
PIPES
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 30 MM
NB 1.500 INCHES; THICKNESS 25 MM
NB 1.500 INCHES; THICKNESS 30 MM
NB 1.500 INCHES; THICKNESS 35 MM
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
M59902010000
M59902010505
M59902010605
M59902010705
M59902010805
M59902010905
M59902011005
M59902011105
M59902011205
M59902011305
M59903000000
M59903010000
M59903010505
M59903010605
M59903010705
M59903010805
M59903010905
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
10
55
15
15
55
165
30
120
20
20
5
75
5
10
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
12SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 1.500 INCHES; THICKNESS 45 MM
NB 2.000 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 30 MM
NB 2.000 INCHES; THICKNESS 35 MM
NB 2.000 INCHES; THICKNESS 50 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 4.000 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 45 MM
NB 6.000 INCHES; THICKNESS 30 MM
NB 6.000 INCHES; THICKNESS 45 MM
NB 6.000 INCHES; THICKNESS 55 MM
NB 8.000 INCHES; THICKNESS 60 MM
INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL
PIPES
NB 2.000 INCHES; THICKNESS 25 MM
NB 3.000 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 25 MM
NB 6.000 INCHES; THICKNESS 25 MM
INSULATION TYPE : IH; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
M59903011005
M59903011105
M59903011205
M59903011305
M59903011405
M59903011505
M59903011605
M59903011705
M59903011805
M59903011905
M59903012005
M59903012505
M59904000000
M59904010000
M59904010505
M59904010605
M59904010705
M59904010805
M59905000000
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
5
90
5
165
120
25
5
5
45
15
160
160
180
120
160
220
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
13SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
PIPES
NB 2.000 INCHES; THICKNESS 25 MM
NB 3.000 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 25 MM
NB 6.000 INCHES; THICKNESS 65 MM
INSULATION TYPE : IS; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : INHIBITED ROCKWOOL
PIPES
NB 0.750 INCHES; THICKNESS 25 MM
NB 1.500 INCHES; THICKNESS 25 MM
NB 4.000 INCHES; THICKNESS 25 MM
Removal of insulation from existing lines including allancillary materials, vapour barrier, weather protectivecoverings etc. providing scaffolding for all heights, labour,material, tools and tackles, consumables supervision etc.to complete the work in all respects as per drawings anddirection of Engineer-in-Charge for insulated piping asspecified including all pipes, fittings, flanges, valves etc.
INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL
PIPES
NB 8.000 INCHES; THICKNESS 100 MM
NB 12.000 INCHES; THICKNESS 100 MM
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
M59905010000
M59905010505
M59905010605
M59905010705
M59905010805
M59906000000
M59906010000
M59906010505
M59906010605
M59906010705
M59910000000
M59910100000
M59910110000
M59910110101
M59910110201
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
5
5
95
10
5
5
5
30
10
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
14SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
VALVE ASSEMBLIES
NB 8.000 INCHES; THICKNESS 100 MM
NB 12.000 INCHES; THICKNESS 100 MM
INSULATION TYPE : IH; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL
PIPES
NB 16.000 INCHES; THICKNESS 150 MM
VALVE ASSEMBLIES
NB 16.000 INCHES; THICKNESS 150 MM
INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO 125 (DEG C);INSULATION MATERIAL : ROCKWOOL
PIPES
NB 4.000 INCHES; THICKNESS 25 MM
NB 8.000 INCHES; THICKNESS 25 MM
NB 10.000 INCHES; THICKNESS 25 MM
NB 12.000 INCHES; THICKNESS 25 MM
NB 18.000 INCHES; THICKNESS 25 MM
NB 6.000 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 50 MM
NB 12.000 INCHES; THICKNESS 100 MM
NB 12.000 INCHES; THICKNESS 150 MM
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
M59910210000
M59910210101
M59910210201
M59910300000
M59910310000
M59910310101
M59910320000
M59910320101
M59910400000
M59910410000
M59910410101
M59910410201
M59910410301
M59910410401
M59910410501
M59910410601
M59910410701
M59910410801
M59910410901
NOs
NOs
Metres
NOs
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
2
8
220
10
80
45
60
30
40
165
60
15
45
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
15SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
VALVE ASSEMBLIES
NB 2.000 INCHES; THICKNESS 50 MM
NB 18.000 INCHES; THICKNESS 25 MM
INSULATION TYPE : IS; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : 126 (DEG C) TO 350(DEG C); INSULATION MATERIAL : ROCKWOOL
PIPES
NB 16.000 INCHES; THICKNESS 65 MM
NB 16.000 INCHES; THICKNESS 150 MM
COLD INSULATION (UNITS): Providing thermalinsulation including supply of all insulating and ancillarymaterials, Aluminium foil for SS surfaces, vapour barrier,weather protective coverings, consumables and othernecessary materials , testing of materials as required ,including transportation of materials to work site, dulyinspected by 3rd party inspector(Llyods/BV/DNV or anyother Client approved party) at manufacturer's shop &sample check/inspection at site by EIL Constructioninspector, applying insulation on surfaces as specifiedincluding all preparatory works there on, binding, tying,lacing, stitching and/or otherwise securing , finishing withcladding as per spec., providing bolts, rivets, and selftapping screws wherever specified ,providing inspectionwindows, end seals for flanges etc., colour coding andidentification. Providing steel scaffolding, all tools , tackles, equipments etc. , labour, supervision and completing thework in all respect, at all heights as per drawings ,specifications and instructions of Engineer-in-charge.(Applicable EIL specification is 6-44-0003, for ColdInsulation and its addendum.)
194
195
196
197
198
199
200
201
202
M59910420000
M59910420101
M59910420201
M59910500000
M59910510000
M59910510101
M59910510201
MA0000000000
MA0700000000
NOs
NOs
Metres
Metres
19
1
10
30
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
16SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
INSULATION TYPE : IC; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)
PIPES
NB 0.500 INCHES; THICKNESS 30 MM
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 30 MM
NB 0.750 INCHES; THICKNESS 65 MM
NB 0.750 INCHES; THICKNESS 75 MM
NB 1.500 INCHES; THICKNESS 85 MM
NB 2.000 INCHES; THICKNESS 75 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 35 MM
NB 4.000 INCHES; THICKNESS 90 MM
NB 6.000 INCHES; THICKNESS 75 MM
NB 6.000 INCHES; THICKNESS 90 MM
NB12.000 INCHES; THICKNESS 85 MM
NB12.000 INCHES; THICKNESS 105 MM
FLANGE ASSEMBLIES
NB 3.000 INCHES; THICKNESS 30 MM
NB12.000 INCHES; THICKNESS 85 MM
NB12.000 INCHES; THICKNESS 105 MM
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
MA0765000000
MA0765010000
MA0765010406
MA0765010505
MA0765010506
MA0765010513
MA0765010515
MA0765010817
MA0765010915
MA0765011106
MA0765011107
MA0765011318
MA0765011515
MA0765011518
MA0765011817
MA0765011821
MA0765020000
MA0765021106
MA0765021817
MA0765021821
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
NOs
NOs
NOs
5
5
20
5
20
5
5
450
5
5
10
5
20
35
2
1
3
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
17SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
BLIND FLANGE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 30 MM
NB 1.500 INCHES; THICKNESS 85 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 65 MM
NB 4.000 INCHES; THICKNESS 30 MM
NB 6.000 INCHES; THICKNESS 75 MM
VALVE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 30 MM
NB 0.750 INCHES; THICKNESS 65 MM
NB 0.750 INCHES; THICKNESS 75 MM
NB 1.000 INCHES; THICKNESS 25 MM
NB 1.500 INCHES; THICKNESS 85 MM
NB 2.000 INCHES; THICKNESS 25 MM
NB 2.000 INCHES; THICKNESS 30 MM
NB 2.000 INCHES; THICKNESS 75 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 65 MM
NB 4.000 INCHES; THICKNESS 30 MM
NB 4.000 INCHES; THICKNESS 65 MM
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
MA0765030000
MA0765030505
MA0765030506
MA0765030817
MA0765031106
MA0765031113
MA0765031306
MA0765031515
MA0765040000
MA0765040505
MA0765040506
MA0765040513
MA0765040515
MA0765040605
MA0765040817
MA0765040905
MA0765040906
MA0765040915
MA0765041106
MA0765041113
MA0765041306
MA0765041313
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
2
6
1
1
1
2
1
6
13
4
5
1
3
3
3
4
6
7
2
4
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
18SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 6.000 INCHES; THICKNESS 35 MM
NB 6.000 INCHES; THICKNESS 75 MM
NB12.000 INCHES; THICKNESS 105 MM
INSULATION TYPE : IC; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : BELOW -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)
PIPES
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 100 MM
NB 0.750 INCHES; THICKNESS 105 MM
NB 0.750 INCHES; THICKNESS 110 MM
NB 0.750 INCHES; THICKNESS 125 MM
NB 0.750 INCHES; THICKNESS 130 MM
NB 0.750 INCHES; THICKNESS 135 MM
NB 0.750 INCHES; THICKNESS 145 MM
NB 0.750 INCHES; THICKNESS 160 MM
NB 0.750 INCHES; THICKNESS 215 MM
NB 1.000 INCHES; THICKNESS 80 MM
NB 1.000 INCHES; THICKNESS 90 MM
NB 1.000 INCHES; THICKNESS 95 MM
NB 1.000 INCHES; THICKNESS 105 MM
NB 1.000 INCHES; THICKNESS 125 MM
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
MA0765041507
MA0765041515
MA0765041821
MA0769000000
MA0769010000
MA0769010505
MA0769010520
MA0769010521
MA0769010522
MA0769010525
MA0769010526
MA0769010527
MA0769010529
MA0769010532
MA0769010543
MA0769010616
MA0769010618
MA0769010619
MA0769010621
MA0769010625
NOs
NOs
NOs
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
1
4
1
5
5
5
5
10
5
10
5
5
10
5
5
5
15
5
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
19SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 1.000 INCHES; THICKNESS 170 MM
NB 1.500 INCHES; THICKNESS 55 MM
NB 1.500 INCHES; THICKNESS 85 MM
NB 1.500 INCHES; THICKNESS 105 MM
NB 1.500 INCHES; THICKNESS 115 MM
NB 1.500 INCHES; THICKNESS 120 MM
NB 1.500 INCHES; THICKNESS 140 MM
NB 2.000 INCHES; THICKNESS 30 MM
NB 2.000 INCHES; THICKNESS 50 MM
NB 2.000 INCHES; THICKNESS 90 MM
NB 2.000 INCHES; THICKNESS 100 MM
NB 2.000 INCHES; THICKNESS 125 MM
NB 2.000 INCHES; THICKNESS 135 MM
NB 2.000 INCHES; THICKNESS 160 MM
NB 2.000 INCHES; THICKNESS 170 MM
NB 2.000 INCHES; THICKNESS 215 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 100 MM
NB 3.000 INCHES; THICKNESS 110 MM
NB 3.000 INCHES; THICKNESS 125 MM
NB 3.000 INCHES; THICKNESS 130 MM
NB 3.000 INCHES; THICKNESS 135 MM
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
MA0769010634
MA0769010811
MA0769010817
MA0769010821
MA0769010823
MA0769010824
MA0769010828
MA0769010906
MA0769010910
MA0769010918
MA0769010920
MA0769010925
MA0769010927
MA0769010932
MA0769010934
MA0769010943
MA0769011106
MA0769011120
MA0769011122
MA0769011125
MA0769011126
MA0769011127
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
5
5
5
20
5
5
5
5
20
5
5
200
60
5
65
5
5
95
5
5
5
75
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
20SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 3.000 INCHES; THICKNESS 145 MM
NB 4.000 INCHES; THICKNESS 110 MM
NB 4.000 INCHES; THICKNESS 120 MM
NB 4.000 INCHES; THICKNESS 130 MM
NB 4.000 INCHES; THICKNESS 135 MM
NB 4.000 INCHES; THICKNESS 145 MM
NB 4.000 INCHES; THICKNESS 170 MM
NB 6.000 INCHES; THICKNESS 120 MM
NB 6.000 INCHES; THICKNESS 145 MM
NB 6.000 INCHES; THICKNESS 160 MM
NB 8.000 INCHES; THICKNESS 50 MM
NB 8.000 INCHES; THICKNESS 120 MM
NB 8.000 INCHES; THICKNESS 145 MM
NB 8.000 INCHES; THICKNESS 150 MM
NB 8.000 INCHES; THICKNESS 160 MM
NB 8.000 INCHES; THICKNESS 170 MM
NB 8.000 INCHES; THICKNESS 195 MM
NB 8.000 INCHES; THICKNESS 215 MM
NB10.000 INCHES; THICKNESS 150 MM
NB12.000 INCHES; THICKNESS 140 MM
NB12.000 INCHES; THICKNESS 170 MM
NB14.000 INCHES; THICKNESS 190 MM
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
MA0769011129
MA0769011322
MA0769011324
MA0769011326
MA0769011327
MA0769011329
MA0769011334
MA0769011524
MA0769011529
MA0769011532
MA0769011610
MA0769011624
MA0769011629
MA0769011630
MA0769011632
MA0769011634
MA0769011639
MA0769011643
MA0769011730
MA0769011828
MA0769011834
MA0769011938
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
5
50
5
35
5
30
5
100
15
15
5
40
5
140
5
55
5
5
30
60
5
65
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
21SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB16.000 INCHES; THICKNESS 190 MM
NB16.000 INCHES; THICKNESS 195 MM
NB16.000 INCHES; THICKNESS 215 MM
NB18.000 INCHES; THICKNESS 50 MM
FLANGE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 100 MM
NB 0.750 INCHES; THICKNESS 110 MM
NB 0.750 INCHES; THICKNESS 145 MM
NB 1.000 INCHES; THICKNESS 80 MM
NB 1.000 INCHES; THICKNESS 90 MM
NB 1.000 INCHES; THICKNESS 95 MM
NB 1.000 INCHES; THICKNESS 105 MM
NB 1.500 INCHES; THICKNESS 55 MM
NB 1.500 INCHES; THICKNESS 85 MM
NB 1.500 INCHES; THICKNESS 105 MM
NB 1.500 INCHES; THICKNESS 115 MM
NB 2.000 INCHES; THICKNESS 125 MM
NB 3.000 INCHES; THICKNESS 135 MM
NB 4.000 INCHES; THICKNESS 110 MM
NB 4.000 INCHES; THICKNESS 145 MM
NB 6.000 INCHES; THICKNESS 120 MM
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
MA0769012038
MA0769012039
MA0769012043
MA0769012110
MA0769020000
MA0769020505
MA0769020520
MA0769020522
MA0769020529
MA0769020616
MA0769020618
MA0769020619
MA0769020621
MA0769020811
MA0769020817
MA0769020821
MA0769020823
MA0769020925
MA0769021127
MA0769021322
MA0769021329
MA0769021524
Metres
Metres
Metres
Metres
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
30
30
95
10
4
3
2
1
2
1
2
3
1
1
2
1
2
1
1
1
3
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
22SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 6.000 INCHES; THICKNESS 160 MM
NB 8.000 INCHES; THICKNESS 50 MM
NB 8.000 INCHES; THICKNESS 150 MM
NB 8.000 INCHES; THICKNESS 170 MM
NB12.000 INCHES; THICKNESS 140 MM
NB14.000 INCHES; THICKNESS 190 MM
NB16.000 INCHES; THICKNESS 145 MM
NB16.000 INCHES; THICKNESS 195 MM
NB16.000 INCHES; THICKNESS 215 MM
BLIND FLANGE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 100 MM
NB 0.750 INCHES; THICKNESS 105 MM
NB 0.750 INCHES; THICKNESS 125 MM
NB 0.750 INCHES; THICKNESS 130 MM
NB 0.750 INCHES; THICKNESS 135 MM
NB 0.750 INCHES; THICKNESS 145 MM
NB 1.000 INCHES; THICKNESS 170 MM
NB 1.500 INCHES; THICKNESS 140 MM
NB 2.000 INCHES; THICKNESS 135 MM
NB 2.000 INCHES; THICKNESS 170 MM
NB 3.000 INCHES; THICKNESS 110 MM
NB 3.000 INCHES; THICKNESS 125 MM
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
MA0769021532
MA0769021610
MA0769021630
MA0769021634
MA0769021828
MA0769021938
MA0769022029
MA0769022039
MA0769022043
MA0769030000
MA0769030520
MA0769030521
MA0769030525
MA0769030526
MA0769030527
MA0769030529
MA0769030634
MA0769030828
MA0769030927
MA0769030934
MA0769031122
MA0769031125
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
1
1
5
2
1
3
5
2
3
1
5
5
1
4
2
1
1
1
1
1
1
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
23SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 3.000 INCHES; THICKNESS 130 MM
NB 3.000 INCHES; THICKNESS 135 MM
NB 3.000 INCHES; THICKNESS 145 MM
NB 4.000 INCHES; THICKNESS 130 MM
NB 4.000 INCHES; THICKNESS 145 MM
NB 8.000 INCHES; THICKNESS 145 MM
NB16.000 INCHES; THICKNESS 145 MM
NB16.000 INCHES; THICKNESS 195 MM
NB16.000 INCHES; THICKNESS 215 MM
VALVE ASSEMBLIES
NB 0.750 INCHES; THICKNESS 25 MM
NB 0.750 INCHES; THICKNESS 100 MM
NB 0.750 INCHES; THICKNESS 105 MM
NB 0.750 INCHES; THICKNESS 110 MM
NB 0.750 INCHES; THICKNESS 125 MM
NB 0.750 INCHES; THICKNESS 130 MM
NB 0.750 INCHES; THICKNESS 135 MM
NB 0.750 INCHES; THICKNESS 145 MM
NB 0.750 INCHES; THICKNESS 215 MM
NB 1.000 INCHES; THICKNESS 90 MM
NB 1.000 INCHES; THICKNESS 105 MM
NB 1.000 INCHES; THICKNESS 125 MM
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
MA0769031126
MA0769031127
MA0769031129
MA0769031326
MA0769031329
MA0769031629
MA0769032029
MA0769032039
MA0769032043
MA0769040000
MA0769040505
MA0769040520
MA0769040521
MA0769040522
MA0769040525
MA0769040526
MA0769040527
MA0769040529
MA0769040543
MA0769040618
MA0769040621
MA0769040625
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
1
1
2
5
2
2
5
2
3
4
8
5
4
9
4
9
7
2
1
4
1
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
24SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 1.000 INCHES; THICKNESS 170 MM
NB 1.500 INCHES; THICKNESS 55 MM
NB 1.500 INCHES; THICKNESS 85 MM
NB 1.500 INCHES; THICKNESS 105 MM
NB 1.500 INCHES; THICKNESS 115 MM
NB 1.500 INCHES; THICKNESS 120 MM
NB 1.500 INCHES; THICKNESS 140 MM
NB 2.000 INCHES; THICKNESS 90 MM
NB 2.000 INCHES; THICKNESS 100 MM
NB 2.000 INCHES; THICKNESS 110 MM
NB 2.000 INCHES; THICKNESS 125 MM
NB 2.000 INCHES; THICKNESS 135 MM
NB 2.000 INCHES; THICKNESS 160 MM
NB 2.000 INCHES; THICKNESS 170 MM
NB 2.000 INCHES; THICKNESS 215 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 100 MM
NB 3.000 INCHES; THICKNESS 110 MM
NB 3.000 INCHES; THICKNESS 135 MM
NB 4.000 INCHES; THICKNESS 110 MM
NB 4.000 INCHES; THICKNESS 145 MM
COLD INSULATION (UNITS): (INSULATION MATERIAL
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
MA0769040634
MA0769040811
MA0769040817
MA0769040821
MA0769040823
MA0769040824
MA0769040828
MA0769040918
MA0769040920
MA0769040922
MA0769040925
MA0769040927
MA0769040932
MA0769040934
MA0769040943
MA0769041106
MA0769041120
MA0769041122
MA0769041127
MA0769041322
MA0769041329
MA9900000000
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
NOs
1
2
2
4
4
1
2
3
2
2
16
5
1
5
5
1
2
3
6
3
6
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
25SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
SUPPLIED BY OWNER)Providing thermal insulation excluding supply of insulationmaterial which shall be supplied by owner but includingsupply of all ancillary materials, aluminium foil for SSsurfaces, vapour barrier, weather protective coverings,consumables and other necessary materials , testing ofmaterials as required , including transportation ofmaterials to work site, duly inspected by 3rd partyinspector Lyods/BV/DNV or any other Client approvedparty) at manufacturer's shop & sample check/inspection at site by EIL Constructioninspector, applying insulation on surfaces as specifiedincluding all preparatory works there on, binding, tying,lacing, stitching and/or otherwise securing , finishing withcladding as per spec., providing bolts, rivets, and selftapping screws wherever specified ,providing inspectionwindows, end seals for flanges etc., colour coding andidentification. Providing steel scaffolding, all tools , tackles, equipments etc. , labour, supervision and completing thework in all respect, at all heights as per drawings ,specifications and instructions of Engineer-in-charge.(Applicable EIL specification is 6-44-0003, for ColdInsulation and its addendum.)
INSULATION TYPE : IC; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)
PIPES
NB 1.000 INCHES; THICKNESS 25 MM
NB 1.000 INCHES; THICKNESS 50 MM
NB 2.000 INCHES; THICKNESS 25 MM
397
398
399
400
401
MA9902000000
MA9902010000
MA9902010105
MA9902010205
MA9902010305
Metres
Metres
Metres
5
5
35
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
26SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
NB 2.000 INCHES; THICKNESS 30 MM
NB 2.000 INCHES; THICKNESS 65 MM
NB 3.000 INCHES; THICKNESS 30 MM
NB 3.000 INCHES; THICKNESS 65 MM
NB 4.000 INCHES; THICKNESS 30 MM
NB 4.000 INCHES; THICKNESS 65 MM
NB 6.000 INCHES; THICKNESS 35 MM
NB 6.000 INCHES; THICKNESS 75 MM
NB 6.000 INCHES; THICKNESS 90 MM
INSULATION TYPE : IC; SURFACE MATERIAL : SS;OPERATING TEMP. RANGE : BELOW -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)
PIPES
NB 0.750 INCHES; THICKNESS 195 MM
NB 2.000 INCHES; THICKNESS 110 MM
NB 2.000 INCHES; THICKNESS 125 MM
NB 12.000 INCHES; THICKNESS 140 MM
NB14.000 INCHES; THICKNESS 190 MM
NB 16.000 INCHES; THICKNESS 145 MM
SUPPLY & WRAPPING WITH POLYURETHANE FOAM(PUF) AFTER CLEANING THE IMPULSE LINES OFDUST, RUST, GREASE .THE WRAPPING OF THEROPE AROUND IMPULSE LINE SHALL OVER ITCOMPLETELY WITHOUT LEAVING ANY GAP. FOR
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
MA9902010405
MA9902010505
MA9902010605
MA9902010705
MA9902010805
MA9902010905
MA9902011005
MA9902011105
MA9902011205
MA9903000000
MA9903010000
MA9903010105
MA9903010205
MA9903010305
MA9903010405
MA9903010505
MA9903010605
MA9904000000
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
Metres
125
5
190
115
25
95
30
50
10
10
5
35
5
20
20
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-16-43-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
27SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0ENGINEERING Piping
NEW DELHI 27
OTHER DETAILS REFER '6-44-0003 FOR COLDNSULATION'.
INSULATION MATERIAL : POLYURETHANE FOAM(PUF)
SIZE:- 0.5 INCH
Removal of insulation from existing lines including allancillary materials, vapour barrier, weather protectivecoverings etc. providing scaffolding for all heights, labour,material, toolsand tackles, consumables supervision etc.to complete the work in all respects as per drawings anddirection of Engineer-in-Charge for insulated piping asspecified including all pipes, fittings, flanges, valves etc.
INSULATION TYPE : IC; SURFACE MATERIAL : CS &AS; OPERATING TEMP. RANGE : BELOW -45 (DEG C);INSULATION MATERIAL : POLYURETHANEFOAM(PUF)
PIPES
NB 2.000 INCHES; THICKNESS 50 MM
NB 2.000 INCHES; THICKNESS 135 MM
NB 8.000 INCHES; THICKNESS 50 MM
NB 10.000 INCHES; THICKNESS 150 MM
NB 16.000 INCHES; THICKNESS 190 MM
NB 18.000 INCHES; THICKNESS 50 MM
FLANGE ASSEMBLIES
NB 8.000 INCHES; THICKNESS 50 MM
420
421
422
423
424
425
426
427
428
429
430
431
432
MA9904010000
MA9904010101
MA9905000000
MA9905100000
MA9905110000
MA9905110101
MA9905110201
MA9905110301
MA9905110401
MA9905110501
MA9905110601
MA9905120000
MA9905120101
Metres
Metres
Metres
Metres
Metres
Metres
Metres
NOs
205
15
40
5
25
30
5
1
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited or used, except in thelimited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTD
Date Bidder'sSignature
Bidder'sStamp Div.:
Schedule of Ratesfor
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
TenderName
BALANCE INSULATION WORKS ATLAKWA
REV DATE PURPOSE BY CHECKED APPROVED
SED AND TRAY(MDept.:STATIC EQUIPME 1SHEET OF
06907-11-80-41-MH-SOR-3070-0
SCHEDULE OF RATES Rev
0 PVSS KJH
NEW DELHI
6907-11-16-43-MH-T-3070Tender No. 0Part
12
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
2SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
STATIC EQUIPMENT
HOT INSULATION Providing thermal insulationincluding supply of all insulating and anciliary material, weather protective covering, consumables and othernecessary materials, testing of the material asrequired including transportation of the materials towork sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwisesecuring, providing vapour barrier, finishing withplain/corrugated sheet cladding or as specified,providing bolts, rivets, self tapping screws whereverspecified, providing inspection windows etc., providingnecessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision and completing the work in all respect at all heights asper drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).
Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool).
Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool).
Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool).
1
2
3
4
5
VV
V252.00.00
V252.01.00V02
V252.01.00V05
V252.01.00V16
M2
M2
M2
10.5
1.9
2
( INSULATION THICKNESS - 30 mm )
( INSULATION THICKNESS - 45 mm )
( INSULATION THICKNESS - 100 mm )
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
3SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
Shells of vertical vessels, columns, exchangers,reactors, silencers etc. Surface material : SS.Insulation type : IH &IT (Rockwool).
Shell of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: SS. Insulation type: IS;
COLD INSULATION Providing cold insulation includingsupply of all insulating and anciliary material, protectivecovering, consumables and other necessary materials,testing of the material as required includingtransportation of the materials to work sites, applyinginsulation on surfaces as specified, including allpreparatory works thereon, all binding, tying, lacing,stitching and/or otherwise securing, providing vapourbarrier, finishing with plain/corrugated sheet claddingor as specified, providing bolts, rivets, self tappingscrews wherever specified, providing inspectionwindows etc. providing necessary scaffolding, all tools and tackles, equipment, apparatus etc. labour andsupervision and completing the work in all respect atall heights as per drawings, specifications andinstructions of Engineer-in-Charge. (ApplicableSpecification 6-44-0003).
Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: SS. Insulation type: Ic(Polyurethane foam). Service: Other than LNG.
Shells of vertical vessels, columns, exchangers, reactors,
6
7
8
9
10
11
V252.03.00V06
V252.07.00
V252.07.01V01
V262.00.00
V262.07.00V26
V262.07.00V27
M2
M2
M2
M2
11
72
18.5
57
( INSULATION THICKNESS - 50 mm )
( INSULATION THICKNESS - 25 mm )
( INSULATION THICKNESS - 150 mm )
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
4SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
silencers etc. Surface material: SS. Insulation type: Ic(Polyurethane foam). Service: Other than LNG.
Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: SS. Insulation type: Ic(Polyurethane foam). Service: Other than LNG.
Shells and heads of horizontal vessels, columns,reactors, exchangers, silencers etc and heads of abovementioned vertical equipments. Surface material SS.Insulation type: Ic (Polyurethane foam). Service: Otherthan LNG.
Shells and heads of horizontal vessels, columns,reactors, exchangers, silencers etc and heads of abovementioned vertical equipments. Surface material SS.Insulation type: Ic (Polyurethane foam). Service: Otherthan LNG.
Shells and heads of horizontal vessels, columns,reactors, exchangers, silencers etc and heads of abovementioned vertical equipments. Surface material SS.Insulation type: Ic (Polyurethane foam). Service: Otherthan LNG.
Miscellaneous
12
13
14
15
16
V262.07.00V37
V262.08.00V06
V262.08.00V27
V262.08.00V32
V999.00.00
M2
M2
M2
M2
48
2
10
1
( INSULATION THICKNESS - 155 mm )
( INSULATION THICKNESS - 215 mm )
( INSULATION THICKNESS - 50 mm )
( INSULATION THICKNESS - 155 mm )
( INSULATION THICKNESS - 180 mm )
cc-001, vv-007
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
5SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
Miscellaneous
HOT INSULATION Providing thermal insulation includingsupply of all insulating and anciliary material, weatherprotective covering, consumables and other necessarymaterials, testing of the material as required includingtransportation of the materials to work sites, applyinginsulation on surfaces as specified, including allpreparatory works thereon, all binding, tying, lacing,stitching and/or otherwise securing, providing vapourbarrier, finishing with plain/corrugated sheet cladding oras specified, providing bolts, rivets, self tapping screwswherever specified, providing inspection windows etc.,providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision andcompleting the work in all respect at all heights as perdrawings, specifications and instructions of Engineer-in-Charge. (Applicable Specification 6-44-0002).Shells of vertical exchanger etc. Surface material: CS/AS.Insulation type : IH (PUF).( INSULATION THICKNESS - 125 mm)
COLD INSULATION Providing cold insulation includingsupply of all insulating and anciliary material, protectivecovering, consumables and other necessary materials,testing of the material as required includingtransportationof the materials to work sites, applyinginsulation onsurfaces as specified, including all preparatory worksthereon, all binding, tying, lacing, stitching and/orotherwise securing, providing vapour barrier, finishingwith plain/corrugated sheet cladding or as specified,providing bolts, rivets, self tapping screws whereverspecified, providing inspection windows etc. providingnecessary scaffolding, all tools and tackles, equipment,apparatus etc. labour and supervision and completing thework in all respect at all heights as per drawings,
17
18
19
V999.99.00
V999.99.99V04
V999.99.99V05
SQM
SQM
7.2
28
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
6SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
specifications and instructions of Engineer-in-Charge.(Applicable Specification 6-44-0003).Shells and heads of horizontal vessel, columns, heatexchangers and heads of above mentioned verticalequipments Surfacematerial: SS. Insulation type: Ic (Polyurethane foam).Service: Other than LNG( INSULATION THICKNESS - 215 mm )
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool). INSULATION THK 25 mm.
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, all
20
21
V999.99.99V06
V999.99.99V07
SQM
SQM
66
3
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
7SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
binding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IH &IT (Rockwool). INSULATION THK 45 mm.
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells & heads of horizontal vessels, columns,exchangers, reactors, silencers etc.heads of abovementioned vertical equipments, Surface material: CS/AS.Insulation type : IH &IT (Rockwool). INSULATION THK 25mm.
22 V999.99.99V08 SQM 116
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
8SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells & heads of horizontal vessels, columns,exchangers, reactors, silencers etc.heads of abovementioned vertical equipments, Surface material: CS/AS.Insulation type : IH &IT (Rockwool). INSULATION THK 30mm.
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at all
23
24
V999.99.99V09
V999.99.99V10
SQM
SQM
7
74
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
9SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
heights as per drawings, specifications and instructions ofEngineer-in-Charge (Applicable Specification 6-44-0002)for:Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS. Insulation type :IS (Rockwool). INSULATION THK 25 mm.
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002)Shells & heads of horizontal vessels, columns,exchangers, reactors, silencers etc.heads of abovementioned vertical equipments, Surface material: SS.Insulation type : Ic (Polyurethene foam). INSULATIONTHK 180 mm.
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,
25
26
V999.99.99V12
V999.99.99V13
SQM
SQM
8
2.5
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
10SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002)
Shells of vertical exchanger etc. Surface material: CS/AS.Insulation type : IH (PUF).( INSULATION THICKNESS - 90 mm)
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002)Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material : SS. Insulation type IH &IT (Rockwool). Insulation thk- 50 mm
Contractor's scope is providing thermal insulation ,including supply of insulation and ancillary material,weather protective covering, consumables and othernecessary materials, testing of the material as required
27
28
V999.99.99V14
V999.99.99V15
SQM
SQM
129
140
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
11SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
including transportation of the materials to work sites,applying insulation on surfaces as specified, including allpreparatory works thereon, all binding, tying, lacing,stitching and/or otherwise securing, providing vapourbarrier, finishing with plain/corrugated sheet cladding oras specified, providing bolts, rivets, self-tapping screwswherever specified, providing inspection windows etc.,providing necessary scaffolding, all tools and tackles,equipment, apparatus etc., labour and supervision andcompleting the work in all respect at all heights as perdrawings, specifications and instructions of Engineer-in-Charge. (Applicable Specification 6-44-0002) Shells of vertical vessels, columns, exchangers, reactors,silencers etc. Surface material: CS/AS/SS. Insulationtype : IH &IT (Rockwool). - INSULATION THICKNESS300 mm ,
Removal of insulation of existing equipment
Insulation material is free issue material, i.e. supplied tocontractor free of cost. Contractor's scope includessupply of ancillary material, weather protective covering,consumables and other necessary materials, testing ofthe material as required including transportation of thematerials to work sites, applying insulation on surfaces asspecified, including all preparatory works thereon, allbinding, tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets, self-tapping screws wherever specified, providing inspectionwindows etc., providing necessary scaffolding, all toolsand tackles, equipment, apparatus etc., labour andsupervision and completing the work in all respect at allheights as per drawings, specifications and instructions ofEngineer-in-Charge. (Applicable Specification 6-44-0002).Vertical shells. Surface material: SS, Insulation Type: Ic
29
30
V999.99.99V16
V999.99.99V17
SQM
SQM
370
27
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-80-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
12SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0STATIC EQUIPME SED AND TRAY(M
NEW DELHI 12
(Polyurethane foam). Insulation thickness-215mm
ENGINEERS INDIA LTD
Date Bidder'sSignature
Bidder'sStamp Div.:
Schedule of Ratesfor
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
TenderName
BALANCE INSULATION WORKS ATLAKWA
REV DATE PURPOSE BY CHECKED APPROVED
MACHINERY EQUIDept.:MACHINERY EQU 1SHEET OF
06907-11-82-41-MH-SOR-3070-0
SCHEDULE OF RATES Rev
0 Issued for Tender NK NK
NEW DELHI
6907-11-16-43-MH-T-3070Tender No. 0Part
3
AP10.10.2015
Balance Insulation Works at Lakwa
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-82-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
2SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0MACHINERY EQU MACHINERY EQU
NEW DELHI 3
Rotating Equipment�
Miscellaneous
Miscellaneous
Installation & application of Cold Insulation to thefollowing including supply of all insulating and anciliarymaterial, protective covering, consumables and othernecessary materials, testing of the material asrequired including transportation of the materials towork sites, applying insulation on surfaces as specified,including all preparatory works thereon, all binding,tying, lacing, stitching and/or otherwise securing,providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets,selftapping screws wherever specified, providinginspection windows etc. providing necessaryscaffolding, all tools and tackles, equipment,apparatus etc. labour and supervision and completingthe work in all respects at all heights as perdrawings, specifications and instructions of Engineer-in-charge(applicable specification 6-44-0003).
Supply, Installation & Application of cold insulation to thefollowing including supply of all insulating and anciliarymaterial, protective covering, consumables and othernecessary materials, testing of the material asrequired including transportation of the materials towork sites, applying insulation on surfaces as specified,including all preparatory works thereon, all binding,tying, lacing, stitching and/or otherwise securing,
1
2
3
4
5
R000.00.00
R999.00.00
R999.99.00
R999.99.99V07
R999.99.99V08
SQM
SQM
6
2.2
For the Suction Barrel/Can of 11-PA-008 A/B, 11-PA-010A/B & 11-PA-011 A/B. Surface material SS-304L,Insulation type IC (PUF:Polyurethane foam), Insulationthickness 200 mm in each case, as per the instructions ofEngineer-In-Charge
The drawing, design and details given in this format are the property of ENGINEERS INDIA LIMITED. They are merely loaned on the borrower's express agreement that they will not be reproduced, copied, exhibited orused, except in the limited way permitted by a written consent given by the lender to the borrower for the intended use. EIL 1641-1915, Revision 1.A4 297 x 210.
ENGINEERS INDIA LTDSCHEDULE OF RATES Rev
Date Bidder'sSignature
Bidder'sStamp Div.: Dept.:
6907-11-82-41-MH-SOR-3070-0
Client : BRAHMPUTRA CRACKER & POLY.LTProject : BCPL CRACKER COMPLEX, ASSAM
3SHEET OF
Rate in RupeesFigures Words
Amount in Rs.QuantityUnitDescription of ItemsItem NoS. No.
0MACHINERY EQU MACHINERY EQU
NEW DELHI 3
providing vapour barrier, finishing with plain/corrugatedsheet cladding or as specified, providing bolts, rivets,selftapping screws wherever specified, providinginspection windows etc. providing necessaryscaffolding, all tools and tackles, equipment,apparatus etc. labour and supervision and completingthe work in all respects at all heights as perdrawings, specifications and instructions of Engineer-in-charge(applicable specification 6-44-0003).For the Suction Barrel/Can of 11-PA-008 A/B, 11-PA-010A/B & 11-PA-011 A/B. Surface material SS-304L,Insulation type IC (PUF:Polyurethane foam), Insulationthickness 200 mm in each case, as per the instructions ofEngineer-In-Charge
PART OF PRICED SOR
Total (Rs) (In Figure)
Total (Rs) (In Words)
Note:
1) Above prices are inclusive of all taxes & duties and exclusive of service tax.
Excise Duty and service tax is payable on submission of proper cenvatable
invoice.
2) Bids would be evaluated on overall lowest cost bid basis. Accordingly, all SOR
items need to be quoted otherwise bid will be liable for rejection.
(SIGNATURE & SEAL OF BIDDER)
PART OF PRICED SOR
FORM SP-3
DETAILS OF CENVATABLE SERVICE TAX
NOTE:
1. Amount of Cenvatable Service Tax shall not be included by the Contractor in their quoted price. OWNER will reimburse the Cenvatable service tax to the CONTRACTOR against production of original Cenvatable documents as required subject to amount of taxable value of services at Column (c) above . In case any variation in quantities of SOR then this amount shall vary proportionately.
2. Effective rate of Service Tax under column no (d) shall be indicated by Contractor after considering the applicable rules and follow the provisions of the Service tax including Government of India latest Notifications & subsequent amendments, if any
3. Bidder shall furnish this Form duly filled in all respects along with Price part.
4. Contractor shall indicate total Cenvatable service tax amount payable under the contract in this format . However, if the services fall under the list of services defined in reverse charge mechanism, then the liability of deposition of service tax to the tax authority by the Contractor and the Owner shall be dealt in accordance with Notifications issued by Government of India from time to time
(SIGNATURE & SEAL OF BIDDER)
S.No. Description AMOUNT OF TAXABLE
VALUE OF SERVICES (Base value)
Effective rate of tax
(%)
Amount of Cenvatable Service Tax
(a) (b) (c) (d) (e=cxd)
1 CENVATABLE SERVICE TAX
PART OF PRICED SOR
FORM SP-4A
DETAILS OF EXCISE DUTY INCLUDED IN QUOTED PRICES FOR INDIGENOUS SUPPLIES
NOTE:
1. Above Cenvatable Excise duty amount shall be deducted from the Total
Prices for the purpose of evaluation
2. Cenvatable Excise Duty Component mentioned in this FORM shall be considered as mandatory discount and shall be adjusted from all R.A. Bills on prorata basis. The Cenvatable Excise Duty shall be reimbursed to the Contractor upon submission of original Cenvatable documents as required to enable Owner to claim Cenvat benefit subject to the ceiling mentioned in this FORM.
3. Bidder shall furnish this FORM duly filled in all respects along with his Price Part.
______________________________ (SIGNATURE & SEAL OF BIDDER)
S.No. DESCRIPTION Amount on which Excise Duty is
applicable (In Rupees)
Amount of Cenvatable Excise Duty Included (In
Rupees) (a) (b) (c)
(d)
1 EXCISE DUTY
PART OF PRICED SOR
FORM SP-4B
DETAILS OF CVD AND SAD INCLUDED IN QUOTED PRICES FOR INDIGENOUS SUPPLIES
NOTE:
1. Cenvatable CVD and SAD amount mentioned above shall be furnished only with
respect to Imported supplies.
2. Above Cenvatable CVD and SAD amount as mentioned above shall be deducted from
the Total Prices for the purpose of evaluation. 3. Cenvatable CVD and SAD amount as mentioned above shall be considered as
mandatory discount since the same has been taken into consideration for evaluation and shall be deducted from all running account bills ( of supplies) on prorate basis. The amount of Cenvatable CVD and SAD amount shall be reimbursed to the Contractor on production of all relevant documents in accordance with provision of bidding document subject to ceiling mentioned above.
4. Bidder shall consider Marine Insurance @1% to arrive at the CIF value and thereby calculate Cenevatble CVD and SAD amount.
S.No. DESCRIPTION AMOUNT IN INDIAN RUPEES (IN INR)
IN FIGURES IN WORDS
(a) (b) (c)
(d)
1 Total Cenvatable CVD
2 Total Cenvatable SAD