Specifications:Height..............................................................................5.50 inches (139 mm)

Width................................................ 4.25 inches (108 mm) (Including Pan Knob)

Weight.......................................................................................2.03 lbs. (920g)

270° (Tilt-Y-Axis)...................90° (Tilt-X-Axis)...................360°(Panning)

16555 108th Ave. • Orland Park, IL 60467 USA1.888.413.3332 • 708.263.4443

#BH1, Ball Head

First Step: Mount the #BH1 onto your Tripod or Mounting Base with a 3/8-16 Mounting Thread Screw. Begin by spinning the entire Ball Head until the unit becomes snug. Next, confirm the panning screw (F) is tight and give the unit a few additional light twists to firmly lock it into place.

Mounting Your Gear: First, install an Arca Compatible Plate onto your camera body. Next, make sure the Main Lock Knob (G) is tight and secure. Clockwise to tighten / Counter-clockwise to loosen. The #BH1 is Arca compatible and features the ProMediaGear #C60 Clamp. Loosen the Clamp Lock Knob (B). The jaws are spring loaded and will open enough to drop in or slide in Arca compatible gear. Once you have your gear in place lock down the Clamp Lock Knob (B) until snug.

General Movements: While holding your camera, loosen the large ergonomic Main Lock Knob (G) to loosen the entire Ball Head mechanism. The Clamp (B) will be free to spin 360° as well as twist back and fort or fall into the 90° Drop Slot (C). Lock down securely once your desired position is achieved.

Panning: Loosen the Pan Lock Knob (F) to rotate your camera 360°

Instructions

A. Arca Compatible #C60 Clamp with Spirit Level

1.

2.

3.

4.

B. Clamp Lock Knob

C. Drop Slot

D. Mounting / Panning Base

E. 3/8-16 Threaded Mounting Adapter

F. Pan Lock Knob

G. Main Lock Knob

360°

Rota

tion

90° Rotation

Customer Service

ProMediaGear708.263.4443 or Toll Free 1.888.413.3332

info@ProMediaGear.com • www.ProMediaGear.com

Check periodically for loose screws and tighten with the included hardware. Oil if necessary with WD40 or a silicone spray. The #BH1 is a precision instrument that should be used only as directed.

Rev 07/18

Ball Head Maintenance

What's In The Box

#HB70Handle for Bracket Plates

#BBGv2Boomerang Flash Bracket

#C60Arca Type Clamp

** L-Brackets **Universal and Custom Available

#GKJr.Katana Junior Gimbal

#PMG-DUO SLIDER(S)VS24 / VS32 / VS36 / VS368 / VS48

34-Series Pro-StixCarbon Fiber Tripods

** Custom Bracket Plates **Various Brands / Models Available

#SS2P3Quick Release Strap System

Additional ProMediaGear Items

• (1) #BH1 Ball Head featuring #C60 Clamp• (1) #PBX3 Universal Bracket Plate• Allen Key Adjustment Set• 5-Year Warranty• Made in the USA