BG 22 H - tpcom.ro 22H.pdf · Technische Daten Technical specifications BG 22 H (BT 65) –...
Transcript of BG 22 H - tpcom.ro 22H.pdf · Technische Daten Technical specifications BG 22 H (BT 65) –...
BG 22 HGroßdrehbohrgerätRotary Drilling Rig
Geräteträger BT 65Base Carrier BT 65
4/2009
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 1
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Bohrverfahren mitSerienausstattung:Kellybohren (ohne Verrohrungsmaschine)
SOB-Verfahren (hydraulisch undelektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulischund elektrisch vorgerüstet)
Drilling processes withstandard equipment:Kelly drilling (without casing oscillator)
CFA drilling (pre-equipped withhydraulic and electric installations)
FDP Full-Displacement-Piling(pre-equipped with hydraulic andelectric installations)
Abmessungen Dimensions
Die BG 22 H, ein Gerät mit einem Einsatz-gewicht von ca. 70 to dient zur Herstellungvon
• verrohrten Bohrungen (Eindrehen desBohrrohres mit dem Drehgetriebe odermit angebauter Verrohrungsmaschine)
• unverrohrten, flüssigkeitsgestütztenBohrungen
• Bohrungen mit langer Hohlschnecke(SOB) - mit oder ohne Kellyverlängerung
• Sonderverfahren wie VdW-Bohren,Verdrängerbohrungen, Soil-MixingVerfahren (SMW und CSM)
Das Trägergerät BT 65 wird von BauerMaschinen geplant und gebaut. Der Motorund das Hydraulikaggregat sind längs einge-baut Diese Bauweise gewährleistet optimaleLuftführung, niedrige Transporthöhe und opti-male Kühlleistung bis 40° Außentemperatur.
The BG 22 H rotary drilling rig has anoperating weight of approx. 70 to. It is ideally suited for:
• Drilling cased boreholes (installation ofcasing by rotary drive or optionally byhydraulic oscillator – both are poweredby the drilling rig)
• Drilling uncased deep boreholes that arestabilised by drilling fluid
• Drilling boreholes with long hollow stemaugers (CFA system), with or withoutkelly extensions
• Special drilling systems, such as FOW piles, displacement piles, soilmixing wall systems (SMW and CSM)
The base carrier BT 65 is designed and builtby Bauer Maschinen. The engine and thehydraulic power pack are mounted in longitu-dinal direction. Such a construction principleensures optimal air flow, low transport height,optimal cooling capacity at 40° ambienttemperature.
Hub / S
troke 8600 m
m
Ke
lly B
K 2
5/3
94
/3/3
0 (
A=
12
71
5 m
m)
12225
22990
55
3625
8030
0
5600
3425-4025 4035
4680
12
30
6330
20750
15
45
0800
1000
8545
24
50
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 2
Technische Daten Technical specifications
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Gesamthöhe Overall height 22.989 mm
Einsatzgewicht ca. (mit Kelly BK25/394/3/24 ) Operating weight (approx.) (with kelly BK25/394/3/24) 70.000 kg
Drehantrieb Rotary Drive KDK 225 K
Drehmoment (nominal) bei 300 bar Torque (nominal) at 300 bar 222 kNm
Drehzahl max Speed of rotation (max.) 30 U/min (RPM)
Vorschubwinde Crowd winch
Druckkraft / Zugkraft (effektiv) Crowd pressure / pull (effective) 260 / 260 kN
Druckkraft /Zugkraft Crowd force push/pullgemessen am Drehteller KDK measured at the casing drive adapter on the rotary drive 220 / 210 kN
Hub (Kellysystem) Stroke (kelly system) 8.500 mm
Hub (SOB-System) Stroke (CFA system) 16.300 mm
Geschwindigkeit (ab/auf) Speed (down/up) 7 / 7 m/min
Schnellgang (ab/auf) Fast speed (down/up) 25 / 25 m/min
Hauptwinde Main winch
Windenklasse Winch classification M6 / L3 / T5
Zugkraft (1. Lage effektiv) Single line pull ( 1st layer effective) 170 kN
Zugkraft (1. Lage nominal) Single line pull ( 1st layer nominal) 218 kN
Seildurchmesser / Länge Rope diameter / length 26 mm / 75 m
Windengeschwindigkeit Line speed max. 56 m/min
Hilfswinde Auxiliary winch
Windenklasse Winch classification M6 / L3 / T5
Zugkraft (1. Lage effektiv) Single line pull ( 1st layer effective) 60 kN
Zugkraft (1. Lage nominal) Single line pull ( 1st layer nominal) 75 kN
Seildurchmesser / Länge Rope diameter / length 16 mm / 45 m
Windengeschwindigkeit Line speed (max.) 55 m/min
Mastneigung Mast inclination
nach hinten / vorne / quer Backward / forward / lateral 15° / 5° / +-5°
Serienausstattung Standard equipment
• Drehgetriebe KDK 235 K (Konstantgetriebe)
• Hauptwinde mit hydraulischer Freilaufsteuerung
• Haupt- und Hilfswinde mit Spezialrillung
• Hubendschalter für Haupt- und Hilfswinde
• Wirbel für Hauptseil
• Vorschub schnell / langsam
• Schwenkbarer Anschlagpunkt für Haupt- und Hilfsseil
Mess- und Steuerungstechnik• SPS Rechner für alle elektrisch angesteuerten Funktionen
• Bauer Komfortbildschirm inkl. Diagnosefunktion und digitalerAnzeige der Pumpendrücke
• Anzeige von Fehlermeldungen
• Notsteuerung Bohrgerät (Kernfunktionen)
• Mastneigungsmessung in x/y Richtung (Anzeige digital/ analog)
• Mastautomatik (automatische Vertikalstellung)
• Hilfswinde mit hydraulischer Seilkraftmessung
• Tiefenmessung Hauptwinde
• Rotary drive KDK 235 K (single gear drive)
• Main winch with hydraulically operated freewheeling
• Main and auxiliary winch with special grooving
• Hoist limit switch on main and auxiliary winches
• Swivel for main rope
• Crowd in fast or slow mode
• Pivoted anchor points for main and auxiliary ropes
Measuring and control equipment• PLC processor for all electrically actuated functions
• Bauer extended monitor incl. diagnostic functions and digitaldisplay of pump pressures
• Display of fault messages
• Emergency mode of operation for drilling rig (core functions)
• Mast inclination measurement on x/y axes (digital/analog display)
• Automatic vertical alignment of mast
• Hydraulic load sensing on auxiliary rope
• Depth measuring device on main winch
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 3
Serienausstattung:• integriertes Kellydämpfungssystem• Gleitleisten sind ohne Demontage
des Drehgetriebes auswechselbar• auswechselbare Kellymitnehmer• auswechselbare Mitnehmerleisten• Kardangelenk• Hydraulische Verbindungen mit
Schnellkupplungen• 3 einstellbare Betriebsmodi (siehe
Diagramme)• Transportstützen• Hebegeschirr
Standard equipment:• Integrated kelly damping system• Wear pads exchangeable without
removal of rotary drive• Exchangeable kelly drive adapter• Exchangeable kelly drive keys• Cardanic joint• Quick-release couplers on hydraulic
hoses• 3 selectable modes of operation
(refer to diagrams)• Transport supports• Slings gear for rotary drive
1760
1000
11
85
500
11
40
601
16
30
22
30
27
0
570
12
70
Gewicht ohne Schlitten 4,9 toWeight without sledge
Drehgetriebe Rotary drive
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
222
M [kN
m] 144
00 10 30
222
M [kN
m]
00 7 30
222
M [kN
m]
n [1/min]
n [1/min]
n [1/min]
50
50
00 7 30
233
M [kN
m]
n [1/min]
106
260
0 14 57
233
M [kN
m] 163
00 9 26
233
M [kN
m]
00 6 26
233
M [kN
m]
n [1/min]
n [1/min]
n [1/min]
57
57
00 6 26
1. Gang Standardbetrieb1st gear standard mode
1. Gang Einrichten und Felsbohren1st gear set up and rock drilling
1. Gang Md reduziert1st gear Md reduced
2. Gang Standardbetrieb2nd gear standard mode
KonstantgetriebeSingle gear rotary drive
KDK 235 K (Standard) KDK 235 S (Optional)
SchaltgetriebeMulti gear rotary drive
Drehmoment nominalDarstellung nicht maßstäblich
nominal torque valuesnot to scale
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 4
Geräteträger BT 65 Base carrier BT 65
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Motor Engine CAT C7
Nennleistung ISO 3046-1 Rated output ISO 3046-1 224 kW @ 2000 U/min (rpm)
Motor spezifiziert nach Abgasnorm Engine conforms to Exhaust Emission EEC 97/68EC Stage 3Standard und EPA/CARB TIER III
Dieseltank Diesel tank 520 l
Umgebungstemperatur unter Vollast Ambient air temperature (at full power) -20° C bis (up to) 40° C
Schalldruckpegel in Kabine Sound pressure level in cabin(EN 791, Anh. A) (EN 791, Annex A) LPA 80 dB(A)
Schalleistungspegel Sound power level (2000/14/EG u. EN 791, Anh. A) (2000/14/EG u. EN 791, Annex A) LWA 112 dB(A)
Hydrauliksystem Hydraulic system Zweikreisbohrhydraulik2-hydraulic circuit system for drilling
Hydraulische Leistung Hydraulic power output(gemessen am Verteilerblock KDK) (measured at inlet to rotary drive) 157 kW
Hydraulikdruck Hydraulic pressure 300 bar
Fördermengen (Hauptkreise + Hilfskreis) Flow rates (main circuits + auxiliary circuit) 2 x 210 l/min + 1 x 120 l/min
Tankinhalt Hydraulic oil tank capacity 650 l
Unterwagen (Teleskopfahrwerk) Undercarriage (Retractable crawler frames) UW 60
Laufwerksklasse Crawler type B 60
Spurweite (eingefahren/ausgefahren) Track width (retracted/extended) 2.300 / 3.600 mm
Fahrwerksbreite (eingefahren/ausgefahren) Overall width of crawlers (retracted/extended) 3.000 / 4.300 mm
3-Steg Bodenplatten Width of triple grouser track shoes 700 mm
Fahrwerkslänge Overall length of crawlers 5.600 mm
Zugkraft (effektiv) Traction force (effective) 385 kN
Zugkraft (nominal) Traction force (nominal) 420 kN
Fahrgeschwindigkeit Travel speed 1,5 km/h
• Motornotsteuerung
• Leerlaufautomatik (zur Verbrauchsoptimierung)
• Motordiagnostiksystem
• Diagnoseleiste für hydraulische Funktionen
• abnehmbarer Ballast
• Verzurraugen an Raupenträgern
• Aufstiegsleiter zum Oberwagen
• Bordbeleuchtungssatz (5 Scheinwerfer)
• Bordwerkzeugsatz
• Elektrische Betankungspumpe
• Komfortfahrerkabine (Breite 950 mm)
• Kabine mit FOPS Standard
• Klimaanlage
• Radio und CD
• Trittroste (neben und vor der Kabine)
• Emergency mode of operation for engine
• Automatic idling mode (to optimise fuel consumption)
• Engine diagnostic system
• Diagnostic panel for hydraulic functions
• Removable counterweight
• Transport securing lugs on crawler units
• Access ladder on uppercarriage
• On-board lighting set (5 spotlights)
• On-board tool set
• Electric refuelling pump
• High-comfort operator's cab (width 950 mm)
• Protective roof grate (FOPS compliant)
• Air conditioning system
• Radio and CD player
• Catwalk (on side and in front of operator's cab)
Serienausstattung Standard equipment
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 5
Drehgetriebe KDK 235 S (Schaltgetriebe)
B-TRONIC 2.1 elektronisches Steuerungs-, Kontroll- und Visualisierungssystem
Bodenplatten
Gittermastverlängerung (für SOB und FDP)
3-teiliger Mast
Rotary drive KDK 235 S (multi-geared)
B-TRONIC 2.1Electronic monitoring-, control- and visualization-system
Track shoes
Lattice mast extension (for CFA and FDP)
Sectional mast (3 parts)
Ausstattungsvarianten Alternative equipment options
Zusatzausstattung Optional equipment
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Ausstattungserweiterung Additional equipment options
GrundgerätKompressor (1000 l/min Saugleistung)
Bioölbefüllung
Schraubstockanbau
Panzerverglasung
Standheizung mit Zeitschaltuhr
Schutzbelüftung
Base carrierCompressor (1000 l/min capacity)
Bio-degradable oil
Vise attachment
Tempered safety glass panels
Independent cab heater with time switch
Pressurized air conditioning system
BohrgerätFreifall Hauptwinde
Wirbel für Hilfsseil
Mastabstützung
Kellyablage
obere Kellyführung
Schneckenputzer (Kellysystem)
Zentralschmierung
Kameraanbau
Mechanische Anbauten für Automatikdrehteller
Vorrüstung Automatikdrehteller(hydraulisch / elektrisch)
Vorrüstung Sonderbohrverfahren
Traverse für "Single Pass" Verfahren
Verrohrungsmaschinenanbau (max. BV 1300 L-06)
Drilling equipmentFreefall main winch
Swivel for auxiliary rope
Mast support unit
Kelly parking
Upper kelly guide
Auger cleaner (for kelly system)
Central lubrication system
Video camera attachment
Mechanical attachment for automatic casing drive adapter
Pre-equipped for automatic casing drive adapter(hydraulic / electrical)
Pre-equipped for special drilling systems
Spreader beam for ‘Single Pass’ systems
Oscillator attachment (max BV 1300 L-06)
Mess- und SteuerungstechnikKomfortpaket– Hauptwinde mit elektronischer Seilkraftmessung– Schlappseilabschaltung Hauptwinde– Funktion "Wirbel Aufstellen" Hauptwinde– Drehzahlmessung KDK – Anpresskraft-Einstellung – Abbohrassistent Kelly– Ziehsteuerung– Überlastschutz für Hauptseil– Überwachung Endschalter / Sensorik
Aufzeichnung der Betriebsdaten
Fernübertragung der Betriebsdaten
Schockiereinrichtung für KDK
Abbohr -, und Ziehassistent für „Single Pass“ Verfahren
Measuring and control equipmentComfort package– Electronic load sensing on main rope– Rope slack prevention on main winch– Swivel alignment function on main winch– Speed measuring device on KDK– Crowd pressure setting – Crowd control system Kelly– Tool extraction control system– Overload protection device on main rope– Automatic control of end switches and sensors
Recording of operating data
Remote transmission of process and operating data
Uni-directional impact function on KDK (for auger discharge)
Crowd control assistance and tool extraction assistance for‘Single Pass’ systems
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 6
Transportdaten Transport data
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
1230
1230
12055600 5555
7545
6860
5600
18015
3300
2000 3
26
0
18700
5555
3300
74
0
32
60
15
45
1510
11
85
320
3000
700
2220
G = 58,0 to
G = 63,2 to
G = 4,9 to
G = 5,4 to
Gewichtsangaben sind ca. Werte,Zusatzausrüstungen (Optionen) könnendas Gesamtgewicht verändern
Weights shown are approximate values,optional equipment may change theoverall weight
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 7
Hw
20750
A
3625
1700
B
T
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Kellybohrverfahren Kelly drilling system
Bemerkungen zur Bohrdatenermittlungsiehe „Kellystangen 905.518.1“
For further details on the acquisition ofdrilling data please refer to “Kelly Bars 905.518.1”
Unverrohrt Uncased 1.700 mm
Verrohrt Cased 1.400 mm
Bohrdurchmesser Drilling diameter
Ohne BV Without casing oscillator Hw – 0,5 m
Mit BV With casing oscillator Hw – 1,5 m
Bohrrohrlängen Length of casing sections
Bohrtiefen Drilling depths
Zusatzausstattung / optional equipment:
Anbau VerrohrungsmaschineAttachment of hydraulic oscillator
BV 1300 L-06
Standardverfahren: unverrohrt, oder Einbau der Bohrrohre mit DrehgetriebeOption: Einbau der Bohrrohre mit angebauter hydraulischer Verrohrungsmaschine
Standard system: Uncased drilling or installation of casing with rotary driveOptional: Installation of casing with hydraulic oscillator attached to the drilling rig
Kellytyp A (m) B (m) Gewicht Hw (m) T (m)Type of kelly bar Weight (kg)
BK 25/394/3/24 10,71 27,20 4.600 8,13 25,27
BK 25/394/3/27 11,71 30,20 5.000 7,13 28,27
BK 25/394/3/30 12,71 33,20 5.400 6,13 31,27
BK 25/394/3/33 13,71 36,20 5.800 5,13 34,27
BK 25/394/4/36 11,71 39,47 6.500 7,13 37,54
BK 25/394/4/40 12,71 43,47 7.400 6,13 41,54
BK 25/394/4/44 13,71 47,47 8.300 5,13 45,54
BK 25/394/4/52 15,21 53,47 10.200 3,63 51,54
Anwendungen Applications
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 8
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
SOB – Bohrverfahren CFA – drilling system
Anwendungen Applications
Schlit
tenhub / S
troke o
f sle
dge 16300 m
m
Sch
ne
cke
nlä
ng
e /
Au
ge
r le
ng
th 1
73
20
mm
26955
0
300
3425 - 4125 4035
12
30
19925
17620
1000
6000
hydraulische Mastabstützung erforderlichHydraulic mast support required
Zeichnung: Kombinierte Zugkraft mit Vorschubwinde +Hauptwinde mit modifizierter Aufhängung und Traverse Drawing: Combined extraction force with crowd winch andmain winch with modified connection and spreader beam
Standard Kellyverlängerung 6 mKelly extension 6 m
Bohrtiefe mit SchneckenputzerDrilling depth with auger cleaner 15,00 m 21,00 m
Bohrtiefe ohne SchneckenputzerDrilling depth without auger cleaner 16,00 m 22,00 m
Max. BohrdurchmesserMax. drilling diameter 1.000 mm 1.000 mm
Max. Zugkraft Vorschubwinde (effektiv)Max. extraction force crowd winch ( effective) 260 kN 260 kN
Max. Zugkraft Vorschubwinde + Hauptwinde (effektiv)Max. extraction force crowd winch + main winch ( effective) 600 kN 600 kN
Max. Anpresskraft 220 kN + Gewicht Schnecke 220 kN + Gewicht SchneckeMax. crowd force 220 kN + Weight of auger 220 kN + Weight of auger
Schneckenlänge (inkl. Anfänger)Continuous flight auger length (incl. pilot bit) 17,32 m 17,32 m
Schlit
tenhub / S
troke o
f sle
dge 16300 m
m
Sch
ne
cke
nlä
ng
e /
Au
ge
r le
ng
th 1
73
20
mm
22990
0
300
3425 - 4125 4035
12
30
19925
17620
1000
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 9
Anwendungen Applications
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Weitere Bohrverfahren Additional drilling systems
VdW
Vor-der-Wand BohrenFront-Of-Wall drilling (FOW)
DurchmesserDiameter 406 - 610 mm
Tiefe ca. Depth (approx.) 15 m
DrehgetriebeRotary drive VdW 6035
FDP
VerdrängerbohrenFull displacement piling
DurchmesserDiameter 410 – 610 mm
Tiefe ca.Depth (approx.) 15 m
Tiefe ca. (mit Gittermastverlängerung)Depth (approx.) (with lattice boom extension) 25,5 m
DrehgetriebeRotary drive KDK 235 K
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 10
BG 22 H (BT 65) – Großdrehbohrgerät BG 22 H (BT 65) – Rotary drilling rig
Weitere Bohrverfahren Additional drilling systems
SCM + BTM 200
Soil-Mixing Wall System
DurchmesserDiameter 1.000 mm
Tiefe ca.Depth (approx.) 15 m
DrehgetriebeRotary Drive KDK 235 K
CSM
Cutter Soil-Mixing System
DickeThickness 500 mm
StichlängePanel length 2.200 – 2.400 mm
Tiefe ca.Depth (approx.) 15 m
MischkopfMixing head BCM 5
Anwendungen Applications
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 11
BG-System – H-Version
Technische Änderungen ohne Vorankündigung undVerpflichtung gegenüber früher gelieferten Geräten. Die abgebildeten Geräte können Sonderausstattungenhaben. Technische Daten ohne Berücksichtigung desWirkungsgrades.Irrtum und Druckfehler vorbehalten.
Technical Specifications are subject to change withoutprior notice and incurring responsibility for machinespreviously sold. The shown machines may have specialequipment. Technical data do not consider power losses.Error and misprints reserved.
905.658.1 4/09
BG 15 HBG 12 H BG 18 H BG 20 H
BG 24 H BG 22 H BG 28 H BG 36 H
BAUER Maschinen GmbHBAUER-Straße 1D-86529 SchrobenhausenTel. +49 (0)82 52/97-0Fax +49 (0)82 52/97-1135e-mail: [email protected]
905-658-1_04-09_BG22H.qxd 09.04.2009 10:24 Uhr Seite 12