Better. Simpler - [email protected] | Contents | 1 Contents 02 HDMI Distribution...
Transcript of Better. Simpler - [email protected] | Contents | 1 Contents 02 HDMI Distribution...
Prod
uc
t Ca
talo
gu
e: Issu
e 85
ww
w.la
bg
ea
r.co
.uk
Printed: 2018
Signal Reception& Distribution
Product Catalogue: Issue 85
Better. Simpler
Set the frequency • Enter a name • Allocate an LCN
The new EM1000 Encoder Modulator from Labgear.
www.labgear.co.uk
BackwardsCompatible
A new catalogue is a great opportunity to showcase our product range, but in a rapidly evolving market expect to see things continue to develop
and our website will be updated regularly to reflect this.
www.labgear.co.uk
For this issue we are really pleased to include two new brand names in our portfolio, neither of which may be completely new to you:
The highly respected satellite reception brand has developed a new Universal Quad LNB for the UK (page 19) and a FTA HD Satellite Receiver (page 15) both of which have had a positive reception from the trade.
We have also tried to provide you with some useful information including a few words on new regulations like RED which affects amplifiers, CPR which affects cable and the 700MHz clearance which will probably affect us all.
Labgear Is a member of the CAI and our RED compliant products are suitable for Freeview reception.
Known for premium AV products, Thor have joined with us to market their TV bracket range. These sturdy brackets have some great features and are easy to install.
A blueprint for better reception.
The NEW VK4L universal quad LNB
Distributed by in the UK and Eire
Low noise. RED compliantMember
No. M. 1125
1234
1234
A
B
C
D
E E
A
B
C
D
[email protected] | www.labgear.co.uk Contents | 1
Contents
02 HDMI Distribution
Satellite & IF Distribution13 Meters
15 IF Distribution
18 Satellite Accessories
Amplification & Distribution24 Masthead Products
26 Indoor Distribution Amplifiers
Accessories37 Splitters
40 Attenuators
41 Filters
42 Connectors
44 Standard & Modular Outlets
51 Cables
57 Aerials
THOR Wallmounts63 Wall Mounts
2 | HDMI Distribution [email protected]
HDMI Distribution
HDMI V2.0 Matrix & Down-Convertor
Our Matrix products are on a par with the best in the market, fully loaded to meet the demands of commercial or top-end domestic systems.
HD2-MX4X4-70K 4x4 HDMI V2.0 Matrix Kit with mirrored outputs
HD2-CVHD1 Down-Converter for non 4K displays HDMI V2.0 - V1.4
70m
IRcontrol
EDIDauto
PoE4+4
Mirrored
HD2-RP50 Extends HDMI range by up to 20m
+20m
HDMI Distribution | 3
HDMI Distribution
www.labgear.co.uk
HDMI V2.0 Matrix
Our Matrix products are on a par with the best in the market, fully loaded to meet the demands of commercial or top-end domestic systems.
HD2-MX8X8-70K 8X8 HDMI V2.0 Matrix Kit
8+8Mirrored
70m
IRcontrol
EDIDauto
PoE
Mirrored Outputs
8x Display CAT6 cable 8x Display HDMI cable
4 | HDMI Distribution [email protected]
HDMI Distribution
HDMI V2.0 Switches & Repeater
Connect a single UHD display to 3 or 5 UHD sources and switch manually or with remote control.
HDS5 5 Way UHD 4k HDMI Switch
HDS3 3 Way UHD 4k HDMI Switch
20m
IRcontrol
EDIDauto
PoE
HDMI Faceplate Modules
• Rotating helps to prevent kinking of attached HDMI leads
• Also available in white
• 25 x 50mm
• Also available in black
70431R Rotating HDMI socket
70432PB Single HDMI socket
A full range of modular faceplates, frames and inserts can be found on pages 46-9.
HDMI Distribution | 5
HDMI Distribution
www.labgear.co.uk
HDMI V2.0 Splitters & IR Extender
Split the HDMI signal from a single UHD 4k source to multiple displays without loss of signal strength.
HD2-SP2 2 Way UHD 4k HDMI Splitter
HD2-SP4 4 Way UHD 4k HDMI Splitter
HD2-SP8 8 Way UHD 4k HDMI Splitter
HD2-IRK IR Extender Kit – IR Receiver, IR Emitter and HDMI injector. Injects an IR return signal onto HDMI
20m
IRcontrol
EDIDauto
PoE
6 | HDMI Distribution [email protected]
HDMI Distribution
Rx
Splitter/Transmitter
DVD Player
HDMICable
NetworkCable IR Sender
IR Receiver
IR Receiver
IR Receiver
IR Receiver
Rx
Rx
Rx
TV
TV
TV
TV
TV
HDMI 4-Way Extender Splitter
Run 4 displays from a source up to 60M look below.
HDX450P 4-way HDMI Extender Splitter Kit
1080PFull HD
50m
IRcontrol
EQswitch
loop through
PoE
HDX450P Setup
HDMI Distribution | 7
HDMI Distribution
www.labgear.co.uk
HDMI Extender Kit
The most popular HDMI extender over CAT cable is packed with features to simplify installation.
HDX60P HDMI Extender Kit
1080PFull HD
60mover CAT6
IRcontrol
loop through
PoEfrom Tx
EQon RX
Tx
HDMICable
HDMI Cable
Network Cable
HDMICable
IR Receiver
Rx
TV TVHDX60P Setup
8 | HDMI Distribution [email protected]
HDMI Distribution
1.5m - HDM 1.5E / 3m - HDM 3E / 5m - HDM 5E 1.5, 3 and 5m High speed HDMI cable with plastic heads
10m - HDM 10E / 15m - HDM 15E / 20m - HDM 20E 10, 15 and 20m High speed HDMI cables with polished metal connectors. Fitted with twin ferrite RFI/EMI noise suppressors
10/15m 20m
High Speed HDMI Cable with Ethernet
High quality OFC cables designed to carry HDTV, 3DTV, TrueHD audio and Ethernet.
1080PFull HD
24k Goldconnectors
10-20m
Metal Heads& Twin Ferrites
1080PFull HD
24k Goldconnectors
1.5-5m
Mouldedhead
Insulation: HD-PE, OD: Ø 0.5HDPE(1 twisted)
Conductor:30AWG(1/0.254mmBC)*1pair
Insulation:Foam-PE,OD:Ø0.7
Insulator: 5*al
Drain Wire: 5*30AWG(1/0.254mm BC)
Conductor: 5*[30AWG(1/0.254mmBC)*1pair]
Insulation:HD-PE,OD: Ø0.5mm
Conductor: 2C*30 AWG(1/0.254mmBC)
Shielding:AL/MY 0.025*20mm
Braiding: 80#/0.12 ALMG+1/0.254mm BC
Jacket: Ø 6.0mmUL PVC, 70P Black
Insulation: HD-PE, OD: Ø 0.5HDPE(1 twisted)
Conductor:26AWG(1/0.40mmBC)*1pair
Insulation:Foam-PE,OD:Ø0.7
Insulator: 5*al
Drain Wire: 5*26AWG(1/0.40mm BC)
Conductor: 5*[26AWG(1/0.40mmBC)*1pair]
Insulation:HD-PE,OD: Ø0.5mm
Conductor: 2C*26AWG(1/0.40mmBC)
Shielding:AL/MY 0.025*20mm
Braiding:128#/0.12ALMG+1/0
Jacket: Ø 8.0mmUL PVC, 70P Black
Insulation: HD-PE, OD: Ø 0.5HDPE(1 twisted)
Conductor:24AWG(1/0.51mmBC)*1pair
Insulation:Foam-PE,OD:Ø0.7
Insulator: 5*al
Drain Wire: 5*24AWG(1/0.51mm BC)
Conductor: 5*[24AWG(1/0.51mmBC)*1pair]
Insulation:HD-PE,OD: Ø0.5mm
Conductor: 2C*24AWG(1/0.51mmBC)
Shielding:AL/MY 0.025*20mm
Braiding:128#/0.12ALMG+1/0.32mm
Jacket: Ø 9.0mmUL PVC, 70P Black
HDMI Distribution | 9
HDMI Distribution
www.labgear.co.uk
1.5m - PHD01 / 3m - PHD03 / 5m - PHD05 1.5, 3 and 5m High speed premium HDMI cables. Fitted with twin ferrite RFI/EMI noise suppressors
18GBps4K UHD
24k Goldconnectors
1.5-5m
Metalpolished head
1.5/3m 5m
Premium Certificated HDMI Cable with Ethernet
The ultimate cable for UHD 4K 18GBps signal distribution with HDMI certification.
HDMI Cable Certification
The Premium HDMI Cable Certification Program is run by the creators of HDMI technology, it encompasses additional and enhanced cable testing as well as an authentication and verification program.
Cables are tested to ensure they support the full 18Gbps bandwidth from the HDMI 2.0b specification plus an EMI test to ensure cables minimize interference with wireless signals.
The program is designed to give users confidence when purchasing new HDMI cables for their 4K/UltraHD products that may include features such as 4K@60Hz, BT.2020 and HDR.
Insulation: HD-PE, OD: Ø 0.6HDPE(1 twisted)
Conductor:30AWG(1/0.254mmBC)*1pair
Insulation:Foam-PE,OD:Ø0.6
Insulator: 5*al
Drain Wire: 5*30AWG(1/0.254mm BC)
Conductor: 5*[30AWG(1/0.254mmBC)*1pair]
Insulation:HD-PE,OD: Ø0.6mm
Conductor: 2C*30AWG(1/0.254mmBC)
Shielding:AL/MY 0.025*20mm
Braiding:128#ALMG+1/0.254BC
Jacket: Ø 6.0mmUL PVC, 70P Black
Insulation: HD-PE, OD: Ø 0.6HDPE(1 twisted)
Conductor:28AWG(1/0.32BC)*1pair
Insulation:Foam-PE,OD:Ø0.6
Insulator: 5*al
Drain Wire: 5*28AWG(1/0.32BC)
Conductor: 5*[28AWG(1/0.32BC)*1pair]
Insulation:HD-PE,OD: Ø0.6mm
Conductor: 2C*28AWG(1/0.32mmBC)
Shielding:AL/MY 0.025*20mm
Braiding:128#ALMG+1/0.254BC
Jacket: Ø 7.3mmUL PVC, 70P Black
10 | HDMI Distribution [email protected]
HDMI Distribution
• Connects an HDMI plug to another HDMI plug
• 24kt hard gold plated contacts for optimum performance
• Supports 480p, 720p, 1080i and 1080p video format
• HDMI plug to HDMI socket connector at 90°
• Ideal for wall mounted HDMI equipment
• 24kt hard gold plated connectors
HDM RA HDMI 90° adaptor
HDM DVA HDMI socket to DVI plug
18293 HDMI Coupler
DVA HDMA DVI-D socket to HDMI plug adaptor
HDMI Accessories
A comprehensive range to suit a variety of applications.
HDMI Distribution | 11
HDMI Distribution
www.labgear.co.uk
Convert HDMI into DVB-T HD
Create your own HD TV Channel and distribute it to every point on your coax TV system.
EM1000 Digital Encoder Modulator
to DVB-T HD
1080PFull HD
Over ExisitingCoax
Simplesetup
Backwardscompatible
AllocateLCN
DVB-T (COFDM) HD Modulator
Constellation - Carriers 64QAM - 8k
Guard Interval - Code Rate - MER 1/32 – 7/8 – 35dB
Bandwidth - Frequency 8MHz – 470-860MHz select by Ch. No.
Output Level 70-100dBuV adjust by 1dB steps
HDMI V1.4 Encoder
Video Up to 1920 x 1080 at 60p
Audio Up to 320kbs
Power Supply12VDC
HDMI
Function Flow Chart
RF inRF out
TV TV TV TVSatellite, Blu-ray, PC,
any HD
Source
CombinerLow Loss
ModulatorDVB-T COFDM
MPEG-4ENCODER
12 | HDMI Distribution [email protected]
HDMI Distribution
Convert & Distribute Multiple HDMI sources
Professional multi-channel distribution that’s straight forward to set-up, neat and reliable.
EM7992 For 2x HDMI or CVBS sources
EM7994 For 4x HDMI or CVBS sources
Multipleinputs
to DVB-T HD
1080PFull HD
Over ExisitingCoax
Backwardscompatible
AllocateLCN
EM7992 & EM7994
Constellation - Carriers 64QAM - 8k
Guard Interval - Code Rate - MER 1/32 – 7/8 – 35dB
Bandwidth - Frequency 8MHz – 470-860MHz select by Ch. No.
Output Level 70-100dBuV adjust by 1dB steps
HDMI V1.4 Encoder
Video Up to 1920 x 1080 at 60p
Audio Up to 320kbs
IF Distribution | 13
Meters
www.labgear.co.uk
Measure signal level & quality for pinpoint alignment
This handy meter gives sound and visual displays to help you lock onto the peak signal, it includes data on 100 satellites and calculates best dish alignment for you.
S201 Satellite meter
S201 - Satellite Input/Demodulation
Input frequency 950-2150MHz
Signal input level -65dB to -25dBm
LNB supply/control13V/18V Max 300mA/22kHz
Demodulation type QPSK, 8PSK
• Compatible DVB-S/S2 DISEqC 1.0/1
• Sound and light aids final adjustment
• Stores data for 100 satellites
• Rechargeable Li-Ion battery and charger
• Protective sleeve and neck strap
• Magnetic compass and torch light
14 | IF Distribution [email protected]
Meters
Professional Metering & Signal Analysis
More advanced meters and analysers for systems and other platforms.
S601A Satellite, Terrestrial, Cable Meter/Analyser
Satellite Input/Demodulation
Input frequency 950-2150MHz
Signal input level -65dB to -25dBm
LNB supply/control13V/18V Max 400mA/22kHz
Demodulation type QPSK, 8PSK, 16APSK
DVB-T/T2/C Input/Demodulation
Input frequency 48-862MHz
Signal input level -79.5dBm (max)
ANT supply5V, 12V/24V Max 100mA
Demodulation typeQPSK, 16QAM,
64QAM, 256QAM
Satellite Input/Demodulation
Input frequency 950-2150MHz
Signal input level -65dB to -25dBm
LNB supply/control13V/18V Max 400mA/22kHz
Demodulation type QPSK, 8PSK
• Large 7 Inch High Definition TFT LCD Screen
• Fully DVB-S/S2, DVB-T/T2, DVB-C
• Digital meter indicates signal strength and quality
• Spectrum analyser
• Supports scan of auto, blind, manual or NIT
• Sound and light alarm for locking signal
• Rechargeable lithium batteries
S401 Satellite meter
• 3.5 Inch High Definition TFT LCD screen
• Fully DVB-S/DVB-S2 compatible
• Digital meter for signal strength and quality
• Supports scan of auto, blind, manual or NIT
• Rechargeable lithium batteries
IF Distribution | 15
IF Distribution
www.labgear.co.uk
Free-to-air HD Satellite Receiver
Plug & play receiver for your favourite satellite channels.
VSAT01 HD Satellite Receiver
• DVB-S and DVB-S2 Compliant
• Fully compliant with HDMI 1.3 specification
• Supports video resolutions: 1080p, 1080i, 720p, 720i, 576p, and 576i
• USB 2.0 port for PVR, Time-shift and timer
• Blind scan, Sat scan, TP scan, NIT scan
• Stores up to 4000 programs
• Supports Now and Next recording
• Teletext and Subtitles
• Features: Parental lock, Channel Edit, Favourite Edit
16 | IF Distribution [email protected]
IF Distribution
QQ Multiswitches
The Labgear QQ range of multiswitches offers the installer the most flexible solution for upgrading domestic systems or installing in smaller communal blocks.
LMS516Q 5 input 16 output
LMS516Q LMS512Q LMS508Q
Number of inputs 5
Number of outputs 16 12 8
Frequency range terrestrial 40-790MHz
Frequency range satellite 950-2150MHz
Gain: terrestrial 4dB Av.
Gain: satellite 3dB Av.
Isolation: OUT/OUT 30dB Typ.
Max output: terrestrial 95dBuV (60dB IMD3-EN50083-5)
Max output: satellite 104dBuV (35dB IMD3-EN50083-3)
Power for terrestrial pre-amp 12V DC 100mA
• Built in compatibility with Quad or Quattro LNB’s
• No adjustment required
• Switch for 12V line power on terrestrial input for pre-amplifier
• Switch-mode power supply for improved reliability
• Built-in 4G LTE800 filtering
LMS508Q 5 input 8 output
LMS512Q 5 input 12 output
IF Distribution | 17
IF Distribution
www.labgear.co.uk
Stepped Output QQ Multiswitches
The balanced solution for larger radial wired integrated reception systems. The Labgear Stepped Output range of multiswitches delivers the ideal balance of signal levels and pre-emphasis on the gain slope to ensure better signals to both the closest and furthest outputs.
LMS532Q 5 input 32 output
LMS524Q 5 input 24 output
LMS532Q LMS524Q
Number of inputs 5
Number of outputs 32 24
Frequency range terrestrial 40-790MHz
Frequency range satellite 950-2150MHz
Gain: short Sat: 0.5dB with 0.5dB pre-emphasis
Gain: medium Sat: 4.5dB with 2.0dB pre-emphasis
Gain: long Sat: 8.0dB with 3.5dB pre-emphasis
Isolation: OUT/OUT 30dB Typ.
Max output: terrestrial 85dBuV (60dB IMD3-EN50083-5)
Max output: satellite 100dBuV (35dB IMD3-EN50083-3)
Power for LNB 600mA max @ 13/18V
• Banks of outputs grouped for short, medium and long cable runs
• No adjustment required
• Pre-emphasis ensures high and low frequencies arrive at each point balanced
• Fitted with Earth Bonding Bars
• Switch-mode power supply for improved reliability
• Built-in 4G LTE800 filtering
18 | Satellite Accessories [email protected]
Satellite Accessories
Satellite Combiner/Amplifier
• 75Ω connection
• Isolation 20dB
• Insertion loss less than 15dB
• Class A screen factor
• Zinc die cast
• 5-862 and 950-2400MHz
• 20dB gain
• Powered by the receiver via coaxial cable
• Low intermodulation distortion
• 500mA Power pass for LNB operation
• Fully screened
• Zinc die cast housing, nickel plated
CM5220
Operating frequency 950-2400MHz
Gain 20dB ± 2.0dB
Noise figure 5dB
Return loss 8dB
Output level SAT at 35dB IMA3 110dBµV
Output level Ter. at 60dB IMA5 105dBµV
Power requirement 11-20V DC 40mA
Power pass (both directions) to LNB etc. 500mA max
CM4161 UHF/Satellite combiner/Splitter
CM5220 Satellite IF in-line amplifier
Satellite Accessories | 19
Satellite Accessories
www.labgear.co.uk
VK4L
Input frequencyLow band: 10.7~11.7GHz
High band: 11.7~12.75GHz
Output frequencyLow band: 950~1950MHz
High band: 1100~2150MHz
L.O. frequencies 9.75/10.6GHz
Noise figure 0.5dB (Typ)
Conversion gain 55dB (min)/65dB (max)
Gain flatness 0.75dB (min)/26MHz (max)
Cross polar isolation 25dB (Typ)
Image rejection 40dB (min)
Operating temperature
-30°C~ +60°C
L.O. stability+/- 1.0MHz @ 25°C
+/- 3.0MHz @ -30°C~ +60°C
Phase noise
-50dBc/hz @ 1kHz
-75dBc/hz @ 10kHz
95dBc/hz @ 100kHz
Power consumption 200mA (max)
RED compliance EN 303 372-1
Satellite LNB’s
VK4L 4 Output LNB
• Finished in grey
• Supplied with a Sky™ compatible bracket
• Built-in spirit level
• Designed to be used with Multi-Switches
• Each output delivers one of the four satellite signal polarities
• 40mm Clamp
QUATTRO 4 Output LNB
• Ideal for Sky™, Freesat™, standard and HD broadcasts
• Runs up to 8 single input receivers
• Ideal for multi room installations
• 40mm Clamp
OCTO 8 Output LNB
20 | Satellite Accessories [email protected]
Satellite Accessories
RF Modulator
This compact unit with SCART AV Input and ‘F’-Aerial connections allows you to modulate your DVD or CCTV signal, so that it can be distributed around your home. It can be piggy-backed to use more than one signal. The unit has an accurate digitally displayed channel selection, Channels 21 to 69.
The SCART input diminishes connection errors and the F-type aerial connectors provide solid and professional connections.
It is PAL-I/BG/K switchable for UK/continental use and has an adjustable video output level, 65-85dBµV.
• Loop through
• LED digital display
• RF output level control
• Software switchable
• PAL-I, PAL B/G and PAL-K
• Fully compatible with CCTV cameras
• Comes complete with: - Power adaptor (9V DC/300mA) - SCART to SCART cable - SCART to phono cable - BNC to phono cable - User guide
MOD111
System PAL-I PAL-B/G PAL-K
ANT to TV 40-1000MHz: 0-4dB
ANT/TV port F-type
Modulator output frequency 470-860MHz Adj.
RF output level 65-85dBµV
Audio sub-carrier 4.5MHz 5.5MHz 6.0MHz 6.5MHz
Audio carrier O/P level compared to video carrier
-12dB or -16dB
Audio/Video input port SCART port
Video input impedance 75Ω
Video input level 1Vp-p
Audio input Recommended 600Ω and 1Vpp
Power supply 9V DC/300mA
MOD111 UHF mini RF modulator - PAL-I/PAL BG
Masthead ProductsThe Radio Equipment Directive 2014
Background
As new technologies use more and more of the radio spectrum there is an increasing need for equipment to operate within narrower ranges, handling more signals and not causing issues in adjacent frequencies. RED sets out the principles for efficient use of the spectrum and under it are a number of Harmonised Standards that help simplify compliance for manufacturers. RED came into full effect in 2017.
Harmonised Standard EN 303 354: Amplifiers
What will change?
Labgear will be the first to deliver a fully compliant range of amplifiers to the market. These new amps will have:
• Improved gain flatness delivering a better balance across the performance range
• Lower noise and therefore improved signal quality
• Greater signal handling capacity to cope with the more crowded spectrum
• Defined standards of filtering to give improved protection from things like 4G interference.
Example
Our LMA mastheads and LDA indoor distribution amps will have a typical 45dB protection from 4G interference built-in as standard. Look for the label.
You will start to see this logo appearing on equipment that takes a signal off-air or transmits a signal to-air but what is behind it and what is the relevance to the installer?
Radio Equipment Directive | 21www.labgear.co.uk
MultiswitchesAllow you to add satellite to terrestrial signals
• Run with either Quad or Quattro LNB
• Systems up to 32 points
p.16-17
Masthead AmpsDeliver the optimum quality by amplifying close to the signal source
• Fixed or variable gain for between 1 and 4 points
• Run cables on outside of building or fit in loft
p.24-25
Distribution AmpsMains powered for systems from 2 to 14 points
• Feed signals to up to 14 points (splitting the FULL output on bigger amps)
• Switch mode power supplies run cooler, last longer and you can take it even further
p.26-36
Coax Cabled Systems to the MAX!
Never under estimate the bandwidth of coaxial cables. A terrestrial only system can carry every digital TV channel, every FM and DAB radio station plus any number of additional HDMI sources (see pages 11 and 12) from the head-end to every point.
New RED compliant amps are specified to carry more signalsand operate in a tighter frequency range.
22 | Terrestrial Distribution [email protected]
Terrestrial Distribution
Distribution Amplifiers | 23
Distribution Amplifiers
www.labgear.co.uk
LA315R MATV Launch Amplifier
A high gain launch amp with 3 filtered inputs.
• Giving you the maximum usable signal whilst minimising noise from out-of-band sources like TETRA and 4G Mobile
• Inputs for FM (88-108MHz), DAB (217-230MHz) and UHF Grp.T (470-790MHz). 0 - 15dB gain control on each input and a useful test port make setting-up simpler
• For longer cable runs there is line-power on the UHF input for pre-amplification
LA315RFM 88-108MHzDAB 217-230MHzUHF Group T 470-782MHzTotal Gain 42dBAdjustment 0-15dB on each inputInputs 3Outputs 1+ Test (-30dB)Max output level EN50083 (dBμV)FM 118dBμVDAB 115dBμVUHF Group T 115dBμVNoise (dB)FM <4dBDAB <6dBUHF Group T <6dB
Out of band rejection >25dB (835-1000MHz)Return loss >7dBConnectors f-type female 75ΩLine power on UHF input Auto switching +12V DC 50mAPower 220-240V~50/60Hz 250mA typOperating temperature -25~+55°CDimensions 250 x 120 x 55mmWeight 640g
LA135R MATV Launch Amplifier
COMPLIANT
24 | Masthead Products [email protected]
Masthead Products
Fixed Gain Masthead Amplifiers
The new Labgear masthead range builds on years of experience supplying the professional installer. Packed with features to make installing simpler and more reliable.
• LTE800 filtering on UHF products
• Choose low-noise fixed gain options or inter-stage variable gain products
• Fully screened modules tilt-out to make cable connection simpler
• Heavy duty metal mast clamp for sturdy fitting
• Weatherproof housing with foam seal
• 1 in, 1 out with class 3 filtering
• Low noise with optimal gain for digital
• Ideal as pre-amp on larger systems
• 1 in, 2 out with class 3 filtering
• Lifts signal to feed an extra point and overcome loss in cables
• Easy to install, nothing to adjust
LMA113R LMA209R
Number of inputs 1 1
Number of outputs 1 2
Frequency range 470-782MHz
Gain 13dB 10dB
Noise figure Typ. <2dB Typ. <2dB
Max output level (IMA3 -60dB) 98dBµv 94dBµv
Isolation between outlets - 18dB
RED and EMC Compliant
Power required 12V DC 30mA
LMA113R Masthead UHF pre-amplifier
LMA209R Masthead UHF 2 way distribution amplifier
COMPLIANT
Masthead Products | 25www.labgear.co.uk
Masthead Products
• Low noise mains powered unit delivers 12V via coax to mastheads
• Rated to 300mA and compatible with all Labgear masthead amplifiers
• Compact design with ‘F’ connectors
PSUFC Power supply for masthead amplifiers
Variable Gain Masthead Amplifiers
LMA125VR LMA415VR
Number of inputs1 2
Number of outputs 1 4
Frequency range 470-782MHz470-782/
87-230MHz
Gain 12-25dB 0-15dB
Noise figure Typ. <2dB Typ. <2dB
Max output level (IMA3 -60dB) 101dBµv 92dBµv
Isolation between outlets - 18dB
RED and EMC Compliant
Power required 12V DC 60mA
PSUFC
DC output12VDC - Voltage tolerance 5% - Current 300mA max
Connector typeType-F (female)
IEC60169-24
Frequency range 5-1000MHz
Signal insertion loss 0.5dB
Power requirement under load
230V~50Hz max. 5W
Power requirement under no load
220-240V~50Hz at <0.3W
Power indicator Green LED
Operating temperature 0-40ºC
Dimensions60.5(L) x 35.5(W) x
24.7(H) mm
• 2 input, UHF with class 3 filtering and VHF for radio
• Variable gain to optimise signal for longer cable runs
• Inter-stage level adjustment for better performance
Also available as a kit with the Power Supply.
• 1 in, 1 out with class 3 filtering
• Adjustable gain up to 25dB for weak signal areas or longer cables
• Adjust down to prevent overload
LMA125VR Masthead 4 way amplifier with variable gain
LMA415VR Masthead UHF amplifier, single output, variable gain
COMPLIANT
26 | Distribution Amplifiers [email protected]
Distribution Amplifiers
Indoor Amplifiers
RED compliant with improved 4G filtering.
• Compact wideband 87-782MHz Amps
• Class 3 filter gives Typ. 45dB rejection of 4G
• Low noise and improved signal handling
• Fully screened with secure f-connectors
LDA101R LDA102R
Number of inputs 1 1
Number of outputs 1 2
Frequency range 87-782MHz 87-782MHz
Gain 18dB 15dB
Gain flatness +/-1dB +/-1dB
Noise figure Typ. <3dB Typ. <3dB
4G protection class 3 Typ. 45dB Typ. 45dB
Isolation between outlets N/A 12dB
Max output level (IMA3 -60dB) 95dBµv 93dBµv
Return loss inputs/outputs Typ. 10dB/10dB Typ. 10dB/14dB
RED, EMC and LVD Compliant
Power required 220-240V 50Hz <3W
LDA101R Wideband signal booster
LDA102R Wideband, 2-output distribution amp
COMPLIANT
Distribution Amplifiers | 27
Distribution Amplifiers
www.labgear.co.uk
LDA2061LR 2-in, 6+FULL out and Auto Line Power
LDA204LR 2-in, 4-out with Auto Line Power
LDA2081LR 2-in, 8+FULL out and Auto Line Power
Distribution Amplifiers
Ideal for medium to larger systems. These amplifiers come packed with added features.
• Dual input amps, VHF 87-230MHz, UHF 470-782MHz
• Class 3 filter gives Typ. 45dB rejection of 4G
• Auto Line Power on UHF in for masthead pre-amp
• 6 and 8-way with FULL output. Can be split for extra points
LDA204LR LDA2061LR LDA2081LR
Number of inputs 2 2 2
Number of outputs 4 6+FULL 8+FULL
Frequency range 87-230 & 470-782MHz
Gain 10dB 10dB/17dB FULL 10dB/17dB FULL
Gain flatness +/-1dB +/-1dB +/-1dB
Noise figure Typ. <3dB Typ. <3dB Typ. <3dB
4G protection class 3 Typ. 45dB Typ. 45dB Typ. 45dB
Isolation between outlets 20dB 20dB 20dB
Max output level (IMA3 -60dB) 90dBµv 85dBµv 85dBµv
Return loss inputs/outputs Typ. 10dB/10dB Typ. 12dB/9dB Typ. 12dB/9dB
Auto Line Power on UHF 12V DC 50mA
RED, EMC and LVD Compliant
Power required 220-240V 50Hz <3W
COMPLIANT
28 | DigiLink [email protected]
DigiLink
DigiL ink
DigiLink allows you distribute the signal from your source to up to 16 points and control the source from any or all of those points by using a DigiLink eye.
Each unit supplies power for the eye via the coax cable and allows the command signal to pass back up either to the RF2 of a satellite receiver or to an OmniLink sender to control a number of sources.
DigiLink
• Powered direct from the receiver p.31
• Convert from SCART or I/O port p.34, p.35
• Line-powered from another room p.29
• Remote Link eyes p.36
• Dual input adds radio signals p.29, p.30, p.32, p.33
• Fully integrated signal distribution p.33
Distribution Amplifiers | 29www.labgear.co.uk
Distribution Amplifiers
LDL206RLP LDL208RLP
Number of inputs 2 2
Number of outputs 6 8
Frequency range 87-230 & 470-790MHz
Gain 10dB 10dB
Noise figure Typ. <4dB Typ. <4dB
Max output level (IMA3 -60dB) 86dBµV 86dBµV
Isolation between outlets 20dB 20dB
Return path range 5-30MHz
Return path gain 6dB 6dB
Power for DigiLink eyes 9V 15mA short circuit protected
RED, EMC and LVD Compliant
Power required 12V DC via Out “1”
Power supply PSUFC included
Requirement 220-240V~50/60Hz max. 5W under load
Output 12V DC max. 300mA
• Power from any room connected to output 1
• Dual input amps, VHF 87-230MHz, UHF 470-790MHz
• Designed to distribute signal from your digibox
• 9V DC on every output to power DigiLink eyes
Line Powered DigiLink Amplifiers
Ideal for signal distribution from a location that doesn’t have mains power. Fully DigiLink compatible.
DigiL ink LDL208RLP 2-in, 8-out DigiLink amp with separate PSU
*Suitable for digital TV signal distribution Ch21-60 from a receiver or from an aerial fitted with a 4G filter.
DigiL ink LDL206RLP 2-in, 6-out DigiLink amp with separate PSU
COMPLIANT
30 | Distribution Amplifiers [email protected]
Distribution Amplifiers
Mains Powered DigiLink Amplifiers
LDL204R LDL206R LDL208R
Number of inputs 2 2 2
Number of outputs 4 6 8
Frequency range 87-230 & 470-790MHz
Gain 10dB 10dB 10dB
Noise figure Typ. <4dB Typ. <4dB Typ. <4dB
Max output level (IMA3 -60dB) 90dBµv 86dBµv 86dBµv
Isolation between outlets 20dB 20dB 20dB
Return path range 5-30MHz
Return path gain 6dB 6dB 6dB
Power for DigiLink eyes 9V 15mA short circuit protected
RED, EMC and LVD Compliant
Power required 220-240V~50/60hz <3W
DigiL ink LDL206R 2-in, 6-out, mains powered DigiLink amp
DigiL ink LDL204R 2-in, 4-out, mains powered DigiLink amp
DigiL ink LDL208R 2-in, 8-out, mains powered DigiLink amp
• Dual input amps, VHF 87-230MHz, UHF 470-790MHz
• Distribute signal from your digibox or *TV and radio aerial
• 9V DC on every output to power DigiLink eyes
• Return path for IR control
*Suitable for digital TV signal distribution Ch21-60 from a satellite receiver or from an aerial fitted with a 4G filter.
COMPLIANT
Distribution Amplifiers | 31www.labgear.co.uk
Distribution Amplifiers
LDL102RR LDL104RR
Number of inputs 1 1
Number of outputs 2 4
Frequency range 87-790MHz
Gain 18dB 14dB
Noise figure Typ. <3dB Typ. <3dB
Max output level (IMA3 -60dB) 96dBµv 92dBµv
Isolation between outlets 12dB 10dB
Return path range 5-50MHz
Return path gain 6dB 6dB
Power for DigiLink eyes 9V 15mA short circuit protected
RED, EMC and LVD Compliant
Power required 9V DC via input from RF2
DigiL ink LDL102RR 1-in, 2-out, receiver powered DigiLink amp
DigiL ink LDL104RR 1-in, 4-out, receiver powered DigiLink amp
Receiver Powered DigiLink Amplifiers
Compact units to extend viewing and control to 2 or 4 extra rooms.
• Powered from the RF2 on your digibox
• Distribute signal from your digibox or *TV and radio aerial
• 9V DC on every output to power DigiLink eyes
• Return path for IR control
*Suitable for digital TV signal distribution Ch21-60 from a satellite receiver or from an aerial fitted with a 4G filter.
COMPLIANT
32 | Distribution Amplifiers [email protected]
Distribution Amplifiers
LDL212R LDL216R
Number of inputs 2 2
Number of outputs 12 16
Frequency range 87-230 & 470-790MHz
Gain 8dB 8dB
Noise figure Typ. <4dB Typ. <4dB
Max output level (IMA3 -60dB) 84dBµV 84dBµV
Isolation between outlets 22dB 22dB
Return path range 5-30MHz
Return path gain 6dB 6dB
Power for DigiLink eyes 9V 15mA short circuit protected
RED, EMC and LVD Compliant
Power required 220-240V~50/60hz <3W
Larger DigiLink Amplifiers
LDL216R 2-in, 16-out mains powered DigiLink amp
LDL212R 2-in, 12-out mains powered DigiLink amp
• Dual input amps, VHF 87-230MHz, UHF 470-790MHz
• Distribute signal from your digibox or *TV and radio aerial
• 9V DC on every output to power DigiLink eyes
• Return path for IR control
*Suitable for digital TV signal distribution Ch21-60 from a satellite receiver or from an aerial fitted with a 4G filter.
COMPLIANT
Distribution Amplifiers | 33www.labgear.co.uk
Distribution Amplifiers
Home Distribution Units
• Designed to distribute any combination of Sky™, Sky+™, FM, DAB, UHF and CCTV signals around the home
• Built-in mode switch optimises the unit according to requirements - either for systems with a satellite receiver, or those without
LDU604R LDU608R
Number of inputs 6 6
Number of outputs 4 8
Gain to outputs +/-7dB
Noise figure 4dB
FM 88-108MHz -4dB
DAB 217-230MHz -5dB
UHF (Downlink) 470-790MHz 2.5dB
CCTV 470-862MHz -6.5dB
SAT 1 950-2300MHz -1.5dB
SAT 2 950-2300MHz -1.5dB
LNB rejection in UHF >40dB
Uplink gain 470-790MHz 8dB
Return path 3-10MHz
Return path gain 0dB
All outputs IR enabled 9V/15mA short circuit protected
LNB line power 20V/400mA
UHF line power 12V/400mA
F-connectors IEC 60169-24
Power requirements 220-240V~50/60hz 250mA typical
LDU608R 6 input 8 output
LDU604R 6 input 4 output
COMPLIANT
34 | Distribution Amplifiers [email protected]
DigiLink Amplifiers
DigiLink SCART-to-RF Converter
Adds DigiLink signal distribution capability to Sky™, Freeview™ or Freesat™ receivers.
• Converts the signal from the SCART output to an RF output with return path
• Simple plug and play installation
• Fully compatible with DigiLink amps and DigiLink eyes to allow channel changing from other rooms
• Provides loop-through from Freeview™ on every TV including the main set
• Supplied with 2 IR transmitters to control up to 2 devices
• Supplied with mains power supply
MRX700
RF modulator output channels 21CH - 69CH
RF forward frequency range 470 - 860MHz
Output level 72+/-4dBµV
RF IN to RF OUT 0-5dB gain
RF connector F-type
AV connector SCART
DC output (RF OUT) 9V DC 100mA (max)
Power supply 9V DC
Dimensions (L x W x H) 116 x 78 x 35mm
Weight 115g
MRX700 DigiLink SCART-to-RF converter
Satellite Dish TVAerial
Sky+HD Receiver
DigiLink
Please noteDigiLinks andleads and arenot supplied
MAINTV
IR Transmitter
Distribution Amplifiers | 35www.labgear.co.uk
DigiLink Amplifiers
DigiLink I/O-to-RF Converter
Restores RF2 functions to Sky™, Sky HD™ & Sky+ HD™ receivers via I/O link.
NB: Link compatible distribution amplifier required for multiple room systems. An RF Link device is required at each TV location (not supplied). Additional remote controls may be required DigiLink = MRX955
• Converts the signal from the Sky™ I/O port to an RF output with return path
• Simple plug and play installation
• Fully compatible with DigiLink amps and DigiLink eyes to allow channel changing from other rooms
• Provides loop-through from Freeview™ on every TV including the main set
• Fully screened compact design with built-in I/O connector and flylead
MRX600K
RF modulator output channels 21CH - 69CH
RF forward frequency range 47 - 862MHz
Return path frequency range 5 to 12 MHz (RF OUT to I/O port)
RF IN connector x1 IEC female
RF OUT connector x2 IEC male
I/O connector 10 pin mini DIN plug on 250mm flylead
DC output (RF OUT) Regulated 9V DC 100mA (short circuit protected)
Power consumption 0.6W in 5V DC (not included 9V DC/100mA max output)
Power supply 5V DC
Dimensions (L x W x H) 60 x 55 x 25mm
Weight 35g
MRX600K DigiLink I/O-to-RF converter
SatelliteDish
10 Pin Din PlugDC in Socket
MRX600K
TVAerial
Sky+HD Receiver
HD
MI/SCA
RT Connection
DigiLink
Please note DigiLinks, leads and power supply arenot supplied
36 | Distribution Amplifiers [email protected]
DigiLink Amplifiers
DigiLink Remote Extenders
Designed for use with Sky™ and Sky+™ receivers.
• Includes adhesive pad for mounting on frames of LCD and plasma screens
• Provides full remote control of satellite receiver using reverse path over coax cable to RF2 output
• Fully electronic interface at receiver
• No infra-red emitter buttons or pyramids required
• Powered by satellite receiver - no additional power supply required
• Compatible with all satellite receivers with 9V RF2 output
• Ensure these products are used with non-isolated outlet plates
• Includes adhesive pad for mounting on frames of LCD and plasma screens
• Provides full remote control of satellite receiver using reverse path over coax cable to RF2 output
• Fully electronic interface at receiver
• No infra-red emitter buttons or pyramids required
• Powered by satellite receiver - no additional power supply required
• Compatible with all satellite receivers with 9V RF2 output
• Ensure these products are used with non-isolated outlet plates
New ultra compact remote eye designed for mounting discreetly on the frame of LCD, LED and plasma screens.
Also suitable for standard TVs. For use with Sky™ and Sky+™ receivers where control is required from another room.
The RF2 output on digital satellite receivers is designed to accept infra-red remote control commands sent in reverse from remote viewing location(s). This allows a remote digital satellite viewer the convenience of full control of the satellite receiver.
MRX955 LCD DigiLink
MRX955F LCD DigiLink
Splitters | 37
Splitters
www.labgear.co.uk
LMT310 Triplexer, FM/DAB/UHF
WBOS2F Wideband 2 way signal splitter
WBOS4F Wideband 4 way signal splitter
Compact Signal Splitters Masthead Triplexer
• Weatherproof box
• Supplied with fixings for mast or wall mounting
• Power pass 1 port both ways
• Wideband frequency 5-2400MHz
• Tilt-out module for easy cable fitting
• Sturdy metal mast clamp
• Fully screened with ‘F’ connectors
• New weatherproof housing with foam seal
• Triplexer filters each input to prevent interference
• Combine FM, DAB and UHF TV
• LTE800 filtering on UHF input
LMT310
FM 88-108MHz
DAB 217.5-230MHz
UHF 470-790MHz
Inband insertion loss VHF/UHF
v<2dB
Return loss VHF 12dB
Return loss UHF 10dB
Isolation between bands VHF/UHF
>25dB
DC Line power 20V 400mA
38 | Splitters [email protected]
Splitters
UHF Splitters: Power Pass all Ports
• All ports 75Ω ‘F’ connectors
• Grounding terminals
• Zinc die cast housing, bright finish
• 2 Fixing screws included
• Screening factor: 30-300MHz ≥ 85dB, 300-470MHz ≥ 80dB, 470-1000MHz ≥ 75dB
• Operating frequency 5-1000MHz
• Power pass all ports
• Minimal insertion loss, high return loss and isolation
• Output port to input port: power pass max. 1A 30V
Frequency Range Insertion Loss Mutual Return Loss
FJU402 2 Way power pass both ports
5-40MHz 40-470MHz
470-860MHz 860-1000MHz
3.5dB 3.7dB 3.8dB 4.0dB
25dB 30dB 27dB 25dB
22dB 22dB 20dB 18dB
FJU704 4 Way
5-40MHz 40-470MHz
470-860MHz 860-1000MHz
6.8dB 7.0dB 7.8dB 8.0dB
27dB 30dB 27dB 25dB
18dB 22dB 20dB 18dB
FJU108 8 Way
5-40MHz 40-470MHz
470-860MHz 860-1000MHz
10.8dB 11.2dB 11.5dB 12.0dB
26dB 27dB 25dB 25dB
20dB 20dB 20dB 16dB
FJU704 UHF 4 way splitter
FJU402 UHF 2 way splitter, powerpass both ports
FJU108 UHF 8 way splitter
Splitters | 39
Splitters
www.labgear.co.uk
Broadband Splitters: Power Pass all Ports
• Lightweight compact housing
• Operating frequency 5-2400MHz
• Power pass all ports
• All ports 75Ω ‘F’ connectors
• Grounding terminals
• Zinc die cast housing, bright finish
• 2 Fixing screws included
Frequency Range Insertion Loss Isolation Loss Return Loss
FBS402 2 Way
5-40MHz 40-1000MHz
1000-2050MHz 2050-2300MHz
4.0dB 5.0dB 5.5dB 6.0dB
20dB 21dB 21dB 20dB
12dB 10dB 10dB 10dB
FBS904 4 Way
40-1000MHz 5-40MHz
40-1000MHz 2050-2300MHz
8.0dB 9.0dB
11.0dB 11.5dB
25dB 21dB 21dB 21dB
10dB 11dB 11dB 10dB
FBS138 8 Way
5-40MHz 40-1000MHz
1000-2050MHz 2050-2300MHz
12.0dB 12.5dB 16.0dB 18.0dB
25dB 22dB 22dB 21dB
10dB 11dB 11dB 10dB
FBS402 Broadband 2 way compact splitter, power pass all ports
FBS904 Broadband 4 way compact splitter, power pass all ports
FBS138 Broadband 8 way compact splitter, power pass all ports
40 | Attenuators [email protected]
Attenuators
Attenuators
Satellite Attenuators
19115SVHF/UHF 3dB in-line satellite attenuator
19116SVHF/UHF 6dB in-line satellite attenuator
19117SVHF/UHF 10dB in-line satellite attenuator
TV Attenuators
19101S VHF/UHF 3dB attenuator
19102S VHF/UHF 6dB attenuator
19104S VHF/UHF 10dB attenuator
• Frequency range 5-2400MHz
• ‘F’connector male to female
• Power pass 500mA, 30V
• Metal housing
• 75Ω impendance
• Tolerance ≥2dB
• Return loss ≥20dB
• Frequency range 5-1000MHz
• Coax plug to socket
• Metal housing
• 75Ωimpendance
• Tolerance ≥1dB
• Return loss ≥20dB
Filters | 41
Filters
www.labgear.co.uk
4G LTE800 Filters
Labgear’s comprehensive range of 4G LTE800 filters cut out potential interference from 4G mobile phone masts in the 800MHz range. They are engineered with a sharp cross-over from the pass band to the stop band and have very high rejection across the full 4G LTE800 frequency range. These filters have been subject to strict independent tests and the range includes the ‘at 800 approved’ F4GA filter, which was used as part of the official programme.
• In-line Ch59 filter with separate coax lead
• Approved for use in the official mitigation project
• Passes signals up to 782MHz (Channel 59)
• Rejects signals above 791MHz (4G LTE800)
• Simply fits between the aerial lead and receiver
• 4G filter with weatherproof housing for outside use. Ideal for masthead mounting
• In-line filter with ‘F’ connections and die cast metal body
F4GA 4G filter with coax lead
F4GO 4G filter for mastheads
F4GF 4G filter with ‘F’ connection
42 | Connectors [email protected]
Connectors
F Connectors
Coax Connectors
F Couplers & Adaptors
19000R Twist-on F plug for RG6 (6.4mm) cable*
LCXA Premium coax plugs, aluminium, box of 100
19015R Coupler F socket to F socket metal*
19077R Coupler F plug to F plug metal*
19074R Coupler right angled F plug to socket metal*
19097R Twist-on F plug for shotgun cable (4.8mm)*
LCOMFI Compression F connector (indoor) for PF100/CT100 cable (6.55+mm)*
LCOMFO Compression F connector (outdoor) for PF100/CT100 cable (6.55+mm)*
19118R Quick fit F plug for RG6 (6.4mm) cable*
19100B Coax plug nickel plated brass*
19001R Twist-on F plug for RG6 (6.4mm) with weatherproof ring*
19096R Crimp-on F plug for PF100/CT100 cable (6.55-6.8mm)*
19095R Crimp-on F plug for CT125 cable (7.8mm)*
19145S Coax socket nickel plated brass*
Connectors | 43
Connectors
www.labgear.co.uk
19061R F terminator (dummy load) 75 metal*
Coax Couplers & Adaptors
Coax/F Connector Adaptors
BNC Connectors BNC Adaptors
19017M Coax coupler socket to socket metal*
19075R Twist-on BNC plug for RG59 cable metal*
*Sold in bags of 100 ** Sold in retail pack of 1
19065R Adaptor F socket to coax socket metal*
19017R Coax coupler socket to socket plastic*
19079R Crimp-on BNC plug for RG59 cable metal*
19066R Adaptor F socket to coax plug metal*
19044R Coax coupler plug to plug metal with plastic grip*
19002R Adaptor BNC plug to phono socket metal*
19067R Adaptor F plug to coax socket metal*
19062R Coax coupler socket to socket metal with plastic grip*
19072R Adaptor BNC plug to F socket metal*
19068HS Adaptor F plug to coax plug metal**
44 | Standard & Modular Outlets [email protected]
Standard & Modular Outlets
Screened Standard Outlets
• Low insertion loss
• Screened to EN 50083-2: >65dB to 1GHz and >55dB to 2.2GHz
• Compact screen housing
• Easy cable connections and access
• For cables with 1mm conductor (PF100, PF100A and RG6.)
• Requires 35mm mounting box
• SAT1, TV/FM/DAB outlets
• Excellent matching and isolation
• TV/FM/DAB outlet
• Excellent matching and isolation
• SAT1, SAT2, TV/FM/DAB outlets
• Excellent matching and isolation
• TV/FM/DAB outlet
PSW111 Screened single IEC coax outlet, non-isolated. Low loss, minimal ingress.
PSW123 Screened diplexed satellite and TV/FM/DAB outlet. Low loss, minimal ingress and negligible module cross talk.
• SAT outlet
PSW113 Screened single F-type satellite outlet. Low loss, minimal ingress and negligible module cross talk.
PSW122 Screened diplexed outlet. Low loss, minimal ingress and negligible module cross talk.
PSW241 Screened quadplexed outlet. Ideal for Sky+™ applications with low loss, minimal ingress and negligible module cross talk.
Standard & Modular Outlets | 45
Standard & Modular Outlets
www.labgear.co.uk
Band Frequency Range Insertion Loss Connector
PSW111 TV DC-862MHz ~0.5dB IEC(F)
PSW113 Satellite DC-2400MHz ~1.2dB F
PSW122TV (return)
TV (forward) Radio
DC-68MHz 350-862MHz 88-230MHz
~1.2dB ~0.6dB ~0.1dB
IEC(M) IEC(M) IEC(F)
PSW123TV
Satellite5-860MHz-NPP* 950-2400MHz
~1.2dB ~2.5dB
IEC(M) F
PSW242T
TV (return) TV (forward)
Radio Satellite IF
Uplink/Return
5-68MHz-NPP* 350-862MHz 88-230MHz
950-2150MHz DC-862MHz
~1.2dB ~2.0dB ~2.0dB ~2.5dB ~0.5dB
IEC(M) 50 x 50mm IEC(M) IEC(F)
F IEC(F)
PSW241
TV Radio
Satellite IF SAT 2
450-862MHz-NPP* 87.5-230MHz 950-2400MHz DC-2400MHz
~2.5dB ~2.5dB ~2.5dB ~2.0dB
IEC(M) IEC(F)
F F
PSW351T
TV Uplink/Return
Radio Satellite IF
SAT 2
450-862MHz-NPP* DC-862MHz 87.5-230MHz 950-2400MHz DC-2400MHz
~2.5dB ~0.5dB ~2.5dB ~2.5dB ~2.0dB
IEC(M) 50 x 50mm IEC(F) IEC(F)
F F
Screened Standard Outlets
• SAT1, TV/FM/DAB return and telephone outlets
• Excellent matching and isolation
• Telephone jack
• SAT1, SAT2, TV/FM/DAB return and telephone outlets
• Excellent matching and isolation
• Telephone jack
PSW242T Screened triplexed outlet with return and telephone socket. Ideal for Sky+™ applications with low loss, minimal ingress and negligible module cross talk.
PSW351T Screened quadplexed outlet with return and telephone socket. Ideal for Sky+™ applications with low loss, minimal ingress and negligible module cross talk.
46 | Standard & Modular Outlets [email protected]
Standard & Modular Outlets
Aerial & Satellite Modules
• Low loss, minimal ingress and negligible module cross talk
• Low loss insertion
• Excellent matching and isolation
• Fully screened to EN 50083-2: >65dB to 1GHz and >55dB to 2.2GHz
• Compact screened housings
• Easy cable connections and access
• For cables with 1mm conductor (PF100, PF100A and RG6.)
• Black and white modular blanks available
• Requires 35mm deep pattress
• TV/FM/DAB outlet
• TV/FM/DAB outlets • TV/FM/DAB outlets
• SAT outlet
• SAT outlet
PSW111M Screened single IEC coax outlet module 25 x 50mm non-isolated
PSW122M Screen diplexed outlet module 50 x 50mm
PSW241M Dual input outlet module 50 x 50mm with SAT1 triplexed
PSW113M Screened single F-type satellite outlet module 25 x 50mm
Also available in: Also available in:
Also available in: Also available in:
Standard & Modular Outlets | 47
Standard & Modular Outlets
www.labgear.co.uk
Blanking Modules
Also available in: Also available in: Also available in:
Band Frequency Range Insertion Loss Connector Dimensions
PSW111M - DC-862MHz ~0.5dB IEC(F) 25 x 50mm
PSW113M - DC-2400MHz ~1.2dB F 25 x 50mm
PSW122MTV (return)
TV (forward) Radio
DC-10MHz 470-862MHz 87.5-230MHz
~2.0dB ~2.0dB ~2.0dB
IEC(M) IEC(M) IEC(F)
50 x 50mm
PSW132M
TV (return) TV (forward)
Radio Satellite IF
3-10MHz* 470-862MHz 87.5-230MHz 950-2400MHz
~2.0dB ~2.5dB ~2.0dB ~2.5dB
IEC(M) IEC(M) IEC(F)
F
50 x 50mm
PSW241M
TV Radio
Satellite IF SAT 2
450-862MHz* 87.5-230MHz 950-2400MHz DC-2400MHz
~2.5dB ~2.5dB ~2.5dB ~2.0dB
IEC(M) IEC(F)
F F
50 x 50mm
70405RE 1/4 Plate modular blank 12.5 x 50mm
70406RE 1/2 Plate modular blank 25 x 50mm
70407RE Full plate modular blank 50 x 50mm
48 | Standard & Modular Outlets [email protected]
Standard & Modular Outlets
Modular Faceplate Frames
• SAT1, TV/FM/DAB outlets
• Excellent matching and isolation
• Holds four 25mm modules
• Choice of white or black modules
• Holds four 25mm modules
• Choice of white or black modules
• Holds four 25mm modules
• Holds two 25mm modules • Choice of white or black modules
• Holds two 25mm modules
• Choice of white or black modules
• Holds two 25mm modules
70403RE Single gang white modular faceplate
70404RE Twin gang white modular faceplate
19606BCVBM Single gang brushed chrome modular faceplate
19605BCVBM Twin gang brushed chrome modular faceplate
19606CPVBM Single gang polished chrome modular faceplate
19605CPVBM Twin gang polished chrome modular faceplate
Standard & Modular Outlets | 49
Standard & Modular Outlets
www.labgear.co.uk
Brush Cable Entry Faceplates & Blanking Modules
• Ideal for discreet cable management
• Ideal for discreet cable management
• Brushed chrome finish
• Ideal for discreet cable management
• Ideal for discreet cable management
• Brushed chrome finish
70435R Single gang cable/exit entry
70435BC Single gang cable/exit entry
70436R Twin gang cable/exit entry
70436BC Twin gang cable/exit entry
50 | Standard & Modular Outlets [email protected]
Standard & Modular Outlets
Networking & Telephone Outlet Modules
70402RE Single CAT5e IDC RJ45 outlet module 25 x 50mm
70695R Single CAT6 IDC RJ45 outlet module 25 x 50mm
70423RE PABX single master telephone outlet module 25 x 50mm
70424RE PABX secondary telephone outlet module 25 x 50mm
Also available in: Also available in:
Also available in: Also available in:
Cables | 51
Cables
www.labgear.co.uk
New cable will be marked with a label like this
Look for the label on the cable drum to guarantee that you only fit compliant cable
Don’t be confused by the title, the Construction Projects Regulations/2014 will affect every installer because any cable fitted “in a building” must comply with this new unifying set of Standards.
All standard Labgear drums of cable are now Reaction to Fire Class Eca, which means they resist flame propagation.
IMPORTANT: New Cable Regulations
52 | Cables [email protected]
Cables
Compact Shotgun RG6 Shotgun Budget Shotgun
Compliance
100m Reference27640
27643R (Reversible)27616
R(black), W(white)27645
R(black), W(white)
250m Reference27644
R(black), W(white)-
27646 R(black), W(white)
Inner core 0.65mm Cu 1.0mm CCS 0.65mm CCS
Dielectric Foam PE 2.9mm Foam PE 4.7mm Foam PE 2.9mm
Foil screening AI/PET/AI 100% Al foil 100% AI/PET/AI 100%
Braid screening96 x 0.11mm
TCu 78% cover64 x 0.12mm
CCA 45% cover48 x 0.12mm
CCA 45% cover
Outer sheathClass Eca PVC
4.7 x 9.4mmClass Eca PVC
6.4mmClass Eca PVC
4.7 x 9.4mm
Signal Attenuation
200MHz 460MHz 1000MHz 1750MHz 2150MHz
13.8dB/100m 21.4dB/100m 32.5dB/100m 42.2dB/100m 47.0dB/100m
10.8dB/100m 16.4dB/100m 23.5dB/100m 32.0dB/100m 44.8dB/100m
14.3dB/100m 21.8dB/100m 33.2dB/100m 44.5dB/100m 48.2dB/100m
Shotgun Coaxial Cables
27640, 27643, 27644 Compact Shotgun Cable
27616 RG6 Shotgun Cable
27645, 27646 Budget Shotgun Cable
Cables | 53
Cables
www.labgear.co.uk
PF100 PF105C PF100A
Compliance
100m Reference27636
R(black), W(white), B(brown)
27638 = 50m R(black with 5
colour coded cores)
27660 R(black), W(white),
B(brown)
250m Reference27637
R(black), W(white), B(brown)
27639 = 100m R(black with 5
colour coded cores)
27661 R(black), W(white),
B(brown)
Inner core 1.0mm Cu 1.0mm Cu 1.0mm Cu
Dielectric Foam PE 4.6mm Foam PE 4.6mm Foam PE 4.6mm
Foil screening Cu foil 100% Cu foil 100% Al foil 100%
Braid screening80 x 0.13mm Cu 54% cover
80 x 0.13mm Cu 54% cover
80 x 0.125mm TCu 54% cover
Outer sheathClass Eca PVC
6.55mmClass Eca PVC
6.55mmClass Eca PVC
6.55mm
Conductor Resistance <26 Ohm/km <26 Ohm/km <26 Ohm/km
Outer Resistance <15 Ohm/km <15 Ohm/km <15 Ohm/km
Signal Attenuation
200MHz 460MHz 1000MHz 1750MHz 2150MHz
8.8dB/100m 13.6dB/100m 20.6dB/100m 27.9dB/100m 31.2dB/100m
8.8dB/100m 13.6dB/100m 20.6dB/100m 27.9dB/100m 31.2dB/100m
9.5dB/100m 15.0dB/100m 21.5dB/100m 29.0dB/100m 32.5dB/100m
System Quality Coax Cables
27636, 27637 Premium PF100 Cable
PF100
PF100A
27638, 27639 5 Colour Coded Core Cable
27600, 27661 PF100A Cable
54 | Cables [email protected]
Cables
RG6 Cables
Standard RG6 Budget RG6
Compliance
100m Reference27600F
R(black), W(white)27481
R(black), W(white)
250m Reference27615F
R(black), W(white)27482
R(black), W(white)
Inner core 1.0mm CCS 1.0mm CCS
Dielectric Foam PE 4.7mm Foam PE 4.7mm
Foil screening AI foil 100% AI/PET/AI 100%
Braid screening64 x 0.12mm
CCA 45% cover48 x 0.12mm
CCA 45% cover
Outer sheathClass Eca PVC
6.4mmClass Eca PVC
6.4mm
Signal Attenuation
200MHz 460MHz 1000MHz 1750MHz 2150MHz
10.8dB/100m 14.6dB/100m 21.5dB/100m 32.0dB/100m 44.8dB/100m
14.3dB/100m 21.8dB/100m 33.2dB/100m 44.5dB/100m 48.2dB/100m
27600F, 27615F Standard RG6 Cable
27481, 27482 Budget RG6 Cable
Cables | 55
Cables
www.labgear.co.uk
Networking Cables
CAT5e UTP CAT5e FTP Shielded CAT6 UTP
Compliance
Reference 70399R 70399FTP 70400R
Pack305m Easy-pull
dispenser200m Drum
305m Easy-pull dispenser
Colour Grey Grey Grey
Conductors 4-Pair 0.485mm Cu 4-Pair 0.485mm Cu 4-Pair 0.56mm Cu
Insulation HDPE 0.88mm HDPE 0.98mm HDPE 1.02mm
Rip-cord Yes Yes Yes
Drain wire No 0.4mm CCA No
Shielding No Al foil no
Separator No No Yes
OuterClass Eca PVC
5.0mmClass Eca PVC
5.6mmClass Eca PVC
6.2mm
Capacitance 5.6nF/100m 5.6nF/100m 5.6nF/100m
Signal Attenuation
31.25MHz 62.5MHz 100MHz 250MHz
11.7dB/100m 17.0dB/100m 22.0dB/100m
-
11.7dB/100m 17.0dB/100m 22.0dB/100m
-
10.7dB/100m 15.4dB/100m 19.8dB/100m 32.8dB/100m
Delay skew <45ns/100m <45ns/100m <45ns/100m
70399R CAT5e UTP Cable
70400R CAT6 UTP Cable Easy-pull dispenser
70399FTP CAT5e FTP Shielded Cable
The category 5e specification cable has a bandwidth of 100 MHz and is ideal for computer networking.
The category 6 specification provides 250 MHz bandwidth and reduced cross-talk. It supports 10GBASE-T (10-Gigabit Ethernet) for distances up to 55 meters and is ideal for AV distribution.
56 | Cables [email protected]
Cables
Security CCTV Cables
CCTV Cable CCTV Cable + Power
Compliance
100m Reference 27630 R(black) 27641 R(black)
250m Reference - -
Inner core 0.58mm Cu 0.58mm Cu
Dielectric Foam PE Foam PE
Foil screening Al foil 100% Al foil 100%
Braid screening 48 x 0.12mm CCA 48 x 0.12mm CCA
Outer sheath Class Eca PVC 5.9mm Class Eca PVC 5.4mm
Power core - 2x 20 x 0.16mm Cu/PVC
Power outer - Class Eca PVC 5.1mm
Conductor Resistance 65 Ohm/km 65 Ohm/km
Outer Resistance - -
Signal Attenuation
200MHz 460MHz 1000MHz
11.8dB/100m 25.1dB/100m 40.9dB/100m
11.8dB/100m 25.1dB/100m 40.9dB/100m
27630R CCTV Cable
27641R CCTV Cable + Power
700MHz Clearance | 57
700MHz Clearance
www.labgear.co.uk
Rollout Plan Overview
Clearing Ch 49-60 for LTE700 based on data supplied by Ofcom. Dates may be subject to change.
Choosing the rightTV aerial
The best Wideband TV aerial to fit after 800MHz clearance and the launch of 4G is: Group T, Ch21-60, 470-790MHz
The best Wideband TV aerial to fit after 700MHz clearance and the launch of new services will be: Group K, Ch21-48, 470-690MHz
NOTE: Fitting a Group K too soon could lose some TV channels.
58 | Aerials [email protected]
Aerials
LOG28T 28 Element, group T Log-Periodic
LPCT Compact, group T Log-Periodic
For details of our Group K TV aerials please contact the Labgear sales office.
Log Periodic Aerials
Log-periodic aerials have more directivity and a flatter gain slope giving a better balance of signal levels especially for wideband reception
LOG28T LPCT
Frequency range 470-790MHz
TV channels 21-60
Forward gain dBd 8.0 5.3
Forward gain dBi 10.2 7.5
Front/back ratio dB >20.0 >17.0
Beam width +/- degree 26° 30°
Connector F-type
Length 1000m 445mm
Width 340mm 315mm
• Balanced performance 470-790MHz
• Highly directional for cleaner signal
• Pre-assembled with f-connector
• Vertical or horizontal fitting
Aerials | 59
Aerials
www.labgear.co.uk
For details of our Group K TV aerials please contact the Labgear sales office.
LHG5T LHG10T
Frequency range 470-790MHz
TV channels 21-60
Forward gain dBd 11.7 12.8
Forward gain dBi 13.9 15.0
Front/back ratio dB >15.0 >16.0
Beam width +/- degree +/-16° +/-14°
PCB balun Yes Yes
Connector F-type
Length 800m 1490mm
Width 535mm 535mm
High Gain Aerials
The improved HG aerials used the proven array design and new rapid-fit reflector.
• Gain where you need it, peaked at high end
• Massive reflector improves directivity
• Easy to assemble but proven robust build
• Can be mounted horizontal, vertical or tilted
LHG10T Maximum forward gain for fringe reception
LHG5T High directivity in a compact design
60 | Aerials [email protected]
Aerials
Aerials
Labgear’s GT range of aerials must be the most popular in the UK; simple to install, rugged and tuned to perform in good signal areas
GT12G GT20G
Frequency range 470-790MHz
TV channels 21-60
Forward gain dBd 10.8 12.0
Forward gain dBi 13.0 14.2
Front/back ratio dB >14.0 >15.0
Beam width +/- degree 20° 18°
Connector F-type
Length 940m 1490mm
Width 345mm 345mm
• Tuned to 470-790MHz to minimise 4G interference
• Gain slope to compensate for losses at high end
• Easy assembly with f-connector dipole
• Vertical or horizontal fitting
GT12G Standard gain, group T
GT20G High Gain, Group T with centre support cradle
For details of our Group K TV aerials please contact the Labgear sales office.
Aerials | 61
Aerials
www.labgear.co.uk
Tri-Boom Aerials
Combining 3 sets of director elements to give higher gain.
LAB450T LAB350T
Frequency range 470-790MHz
TV channels 21-60
Forward gain dBd 11.3 9.3
Forward gain dBi 13.5 11.5
Front/back ratio dB >16.0 >16.0
Beam width +/- degree +/-16° +/-16°
PCB balun Yes Yes
Connector F-type
Length 1100m 676mm
Width 535mm 505mm
LAB450T High gain and directivity
LAB350T High gain in a compact design
• Tri-Boom, more gain from a shorter aerial
• Group T aerials tuned to reject 4G
• Fold out booms and click-fit reflectors
• Can be mounted horizontally, vertically and tilted
For details of our Group K TV aerials please contact the Labgear sales office.
62 | Aerials [email protected]
Aerials
Radio Aerials
Improve your radio signal by getting above ground based noise to receive a stronger signal.
• Ideal for improved radio signal reception
• Collect signals from all directions
• Easy assembly with secure f-connector
• Supplied with mast clamp
LABFM0 Omni-directional FM radio aerial
To check your coverage: www.ukdigitalradio.com/coverage/
LABDAB0 Vertically polarised, omni-directional DAB radio aerial
UK VHF Radio Frequency Allocation
Frequency MHz
100 150 200 250
FM Radio87.5-108MHz 217-230MHz
Wallmounts
FixedMount your TV flat
against the wall
Full Motion
Our most versatile mounts view
from any angle
TiltMove your TV up
and down vertically to avoid reflections
Pull Safety LockProvides an easy solution
for mounting and unmounting your TV securely to and
from the wall.
ToolessTilt Lock
Ensures effortless adjustment of your tilt
wall mount to avoid glare and reflections.
LevelAdjustmentAllows you to adjust
the level of the TV once it is on the wall.
Thor Wallmounts | 63
Wallmounts
64 | Thor Wallmounts [email protected]
28080T
28082T 28095T
28081T
Fixed Wallmounts
28080T 28081T 28082T 28095T
Screen Size 14-24” 24-43” 40-70” 42-100”
VESA 100 x 100 200 x 200 400 x 400 600 x 400
Max Weight 25kg 35kg 35kg 75kg
Wall to TV 15mm 19.5mm 19.5mm 23mm
Lock Type Screw Lock Pull Lock Pull Lock Pull Lock
Thor Wallmounts | 65www.labgear.co.uk
Tilt Wallmounts
• Tilts: +0/-8°28083T
• Tilts: +0/-8°28084T
• Tilts: +0/-8°28096T
28083T 28084T 28096T
Screen Size 24-43” 40-70” 42-100”
VESA 200 x 200 400 x 400 600 x 400
Max Weight 35kg 35kg 75kg
Wall to TV 45mm 45mm 45mm
Lock Type Pull & Tilt Locks Pull & Tilt Locks Pull & Tilt Locks
Wallmounts
66 | Thor Wallmounts [email protected]
28085T 28086T 28087T 28088T 28089T 28097T
Screen Size 14-24” 24-43” 24-43” 24-55” 40-80” 42-80”
VESA 100 x 100 200 x 200 200 x 200 400 x 400 600 x 400 600 x 400
Max Weight 25kg 35kg 35kg 35kg 45kg 45kg
Wall to TV 65-408mm 52-276mm 52-506mm 58-614mm 74-514mm 49-482mm
Full Motion Wallmounts
• Tilts: +3/-12° • Swivels: +90/-90°• Tilts: +5/-8°• Swivels: +90/-90°
• Level Adjustment: +5/-5°
• Tilts: +5/-8°• Swivels: +90/-90°
• Level Adjustment +5/-5°
• Tilts: +5/-8°• Swivels: +90/-90°
• Level Adjustment: +5/-5°
28085T
28088T
• Tilts: +5/-8°• Swivels: +90/-90°
• Level Adjustment +5/-5°
28097T
28087T
28086T
28089T Curved Full Motion Wallmount• Tilts: +5/-8° • Swivels: +90/-90°
Thor Wallmounts | 67www.labgear.co.uk
Specialist Range
• Tilts: +30/-30°• Rotates: 360°
• Tilts: +15/-60°• Swivels: +90/-90°• Rotates: 360°
28093T Projector Ceiling Mount
• Swivels: +160/-160°
28094T Remote Controlled Motorised TV Mount
• Supports up to 15kg
28098T Soundbar Speaker Mount
28091T Desktop Monitor Mount
28091T 28093T 28094T 28098T
Screen Size 13-27” - 32-55” Universal
VESA 100 x 100 - 400 x 400 -
Max Weight 6kg 10kg 35kg 15kg
Extends 442mm 150mm Wall to TV 45mm -
Wallmounts
68 | Thor Wallmounts [email protected]
Specialist Range
28090T 28092T
Screen Size 32-70” 37-70”
VESA 600 x 400 600 x 400
Max Weight 50kg 50kg
Extends 560-910mm -
• Tilts: +10/-10°
• Tilts: +25/-25°• Swivels: +180/-180°• Level Adjustment: +3/-3°
28092T Multi-Function AV Trolley
28090T Fixed TV Ceiling Mount
A new catalogue is a great opportunity to showcase our product range, but in a rapidly evolving market expect to see things continue to develop
and our website will be updated regularly to reflect this.
www.labgear.co.uk
For this issue we are really pleased to include two new brand names in our portfolio, neither of which may be completely new to you:
The highly respected satellite reception brand has developed a new Universal Quad LNB for the UK (page 19) and a FTA HD Satellite Receiver (page 15) both of which have had a positive reception from the trade.
We have also tried to provide you with some useful information including a few words on new regulations like RED which affects amplifiers, CPR which affects cable and the 700MHz clearance which will probably affect us all.
Labgear Is a member of the CAI and our RED compliant products are suitable for Freeview reception.
Known for premium AV products, Thor have joined with us to market their TV bracket range. These sturdy brackets have some great features and are easy to install.
A blueprint for better reception.
The NEW VK4L universal quad LNB
Distributed by in the UK and Eire
Low noise. RED compliantMember
No. M. 1125
1234
1234
A
B
C
D
E E
A
B
C
D
Prod
uc
t Ca
talo
gu
e: Issu
e 85
ww
w.la
bg
ea
r.co
.uk
Printed: 2018
Signal Reception& Distribution
Product Catalogue: Issue 85
Better. Simpler
Set the frequency • Enter a name • Allocate an LCN
The new EM1000 Encoder Modulator from Labgear.
www.labgear.co.uk
BackwardsCompatible