Best dewatering and drying technology for wet spent grains … · 2016-08-01 · All our systems...
2
VetterTec VetterTec GmbH Leipziger Straße 104-108 D -34123 Kassel, Germany Tel : +49 561 500190 Fax: +49 561 5001940 [email protected] www.vettertec.de VetterTec Ltd. Suffolk House. 154 High Street Sevenoaks. Kent TN13 1XE. UK Tel : +44 1732 441440 Fax: +44 1732 458818 [email protected] www.vettertec.co.uk Contact us at any time and find out how we can help you achieve more! Best dewatering and drying technology for wet spent grains processing plants VetterTec Screw Press for wet spent grains VetterTec screw presses are used to pre-dewater wet spent grains prior to the drying section. This will mini- mise the energy demand in the dryer, and thus the operation cost, significantly. Wet spent grains are fed to the pressing screw through a feed hopper, and the screw press conveys them into the compression area, where the pro- duct is further compressed during onward transportation. This is achieved by reducing the volume of the wet spent grain material. The pressed out water escapes through screen cages. At the end of the pressing section, the material falls through a discharge hopper thus leaving the press. VetterTec Tube Bundle Dryer for wet spent grains A tube bundle dryer uses steam for the drying process and works indirectly as a combined contact and convection dryer. This drying principle is very gentle with the product and safe in terms of explosion and fires. At the same time, the amount of air in the vapour is very low and potentially a high percentage of the drying energy can be recovered by re-use in boundary processes (energy integration). VetterTec Spray Dryer for wet yeast VetterTec yeast dryer plants are used to dry the yeast coming from the fermenting cellar and the storing cellar in breweries. Therefore VetterTec offers spray dryers, which are pure convection dryers and atomise the liquid product at the product inlet. A number of different designs with integral fluid bed, external fluid bed, different air outlets, different chambers, etc. are available to provide the desired particle size and moisture content of the final product. Achieving sustainable success Proven Systems As you will find all dewatering and drying technologies for the breweries processing industries in the product portfolio of VetterTec, VetterTec is able to integrate or combine these technologies in order to serve single point responsibility and optimised solutions in terms of optimal product quality and minimised energy consumption. All our systems will be designed individually, so feel free to contact our experts. Parts and Services Our commitment doesn’t stop after successful production startup. VetterTec is offering to continue the close relationship with the customer to ensure an optimised life cycle in terms of cost and performance. Plant Performance Optimisation Troubleshooting Training Plant Retrofitting Preventive Maintenance After Sales Services VetterTec VetterTec as part of Moret Industries Group combines a total of more than 150 years of specialisation and experience in evaporation, drying and dewatering equipment for the ethanol, brewery, starch, environmental, chemical and alcohol industries. VetterTec has experience with the majority of dryer and evaporator types and can select the optimum technology from self owned technologies without any preference. VetterTec has a broad product know-how in a wide range of industries. VetterTec solutions combine energy efficiency with the highest product quality. VetterTec can offer integrated solutions with incorporated energy recovery. VetterTec offers reliable and approved techno- logies ensuring highly assured capital investment. VetterTec operates world-wide and has experience in further various industries like: Corn Starch Industries Fuel Ethanol Industries Alcohol Industries Brewery Industries Oil Extraction Industries Driven by Competence Concept and Artwork: www.fact3.de | February 2015 | Printed on PEFC certified paper out of sustainably managed forest. Expect more – cu sto mi s e d s o l u ti ons Expect more – customised solutions conveying | storage | dewatering | drying Brewery Industries t a k i n g c a r e o f e n v i r o n m e n t a l n e e d s t a k i n g c a r e o f e n v i r o n m e n t a l n e e d s V e t t e r T e c „successful drying systems“
Transcript of Best dewatering and drying technology for wet spent grains … · 2016-08-01 · All our systems...
VetterTec
VetterTec GmbH
Leipziger Straße 104-108 D -34123 Kassel, Germany
Tel : +49 561 500190 Fax: +49 561 5001940
[email protected] www.vettertec.de
VetterTec Ltd.
Suffolk House. 154 High StreetSevenoaks. Kent TN13 1XE. UK
Tel : +44 1732 441440 Fax: +44 1732 458818
Contact us at any time and find outhow we can help you achieve more!
Best dewatering and drying technology for wet spent grains processing plants
VetterTec Screw Press for wet spent grains
VetterTec screw presses are used to pre-dewater wetspent grains prior to the drying section. This will mini-
mise the energy demand in thedryer, and thus the operation cost,significantly. Wet spent grainsare fed to the pressing screwthrough a feed hopper, and thescrew press conveys them into thecompression area, where the pro-duct is further compressed duringonward transportation.
This is achieved by reducing the volume of the wet spentgrain material. The pressed out water escapes throughscreen cages. At the end of the pressing section, thematerial falls through a dischargehopper thus leaving the press.
VetterTec Tube Bundle Dryerfor wet spent grains
A tube bundle dryer uses steamfor the drying process and works
indirectly as a combined contact and convection dryer.This drying principle is very gentle with the productand safe in terms of explosion and fires. At the same time, the amount of air in the vapour isvery low and potentially a high percentage of the drying energy can be recovered by re-use in boundaryprocesses (energy integration).
VetterTec Spray Dryer for wet yeast
VetterTec yeast dryer plants are usedto dry the yeast coming from the fermenting cellar and the storingcellar in breweries. Therefore VetterTec offers spraydryers, which are pure convectiondryers and atomise the liquidproduct at the product inlet.
A number of different designs with integral fluid bed,external fluid bed, different air outlets, differentchambers, etc. are available to provide the desiredparticle size and moisture content of the final product.
Achieving sustainable successProven SystemsAs you will find all dewatering and drying technologies for the breweries processing industries in the product portfolio of VetterTec, VetterTec is able to integrate or combine these technologies in order to serve single point responsibility and optimised solutions in terms of optimal product quality and minimised energy consumption. All our systems will be designed individually, so feel free to contact our experts.
Parts and ServicesOur commitment doesn’t stop after successful production startup. VetterTec is offering to continue the close relationship with the customer to ensure an optimised life cycle in terms of cost and performance.
Plant Performance OptimisationTroubleshooting Training
Plant RetrofittingPreventive Maintenance After Sales Services
VetterTec
VetterTec as part of Moret Industries Group combines a total of more than 150 years of specialisation and experience in evaporation, drying and dewatering equipment for the ethanol,brewery, starch, environmental, chemical and alcohol industries.
VetterTec has experience with the majority of dryer and evaporator types and can select the optimum technology from self owned technologies without any preference.
VetterTec has a broad product know-howin a wide range of industries.
VetterTec solutions combine energy efficiencywith the highest product quality.
VetterTec can offer integrated solutions with incorporated energy recovery.
VetterTec offers reliable and approved techno-logies ensuring highly assured capital investment.
VetterTec operates world-wide and has experience in further various industries like:
Corn Starch Industries
Fuel Ethanol Industries
Alcohol Industries
Brewery Industries
Oil Extraction Industries
Driven by Competence
Concept and Artwork:www.fact3.de | February201
5 | Printed on PEFC certified paper out of sustainably managed forest. Expect more –
customised solutionsExpect more –
customised solutionsconveying | storage| dewatering| drying
Brewery Industries
taking careof
environmen
talneeds
taking care of e
nviron
men
talneeds
VetterTec
„successful drying systems“
VT_Brewery_aussen_160801_Layout 1 01.08.16 09:49 Seite 1
VetterTec
„A number of high efficient, approved and reliable installations in
various wet processing plantsare operating around the world.“
taking care for en
viro
nm
enta
ln
eeds
taking
care for envir
onm
enta
ln
eeds
VetterTec
Brewery Industry
VetterTec Advantage
VetterTec technology is used for collection, conveying, dewatering and drying of spent grains as well as for yeast drying in the brewing industry.
Spent grains
VetterTec supplies a complete component conveying and storage solution for spentgrains through the brewery. VetterTec Screw Presses and VetterTec Dryers can be usedto dewater and dry spent grains to the required final moisture. Dry spent grains contain20 to 26% crude protein and are used as a pure, natural addition to animal fodder.
Combined spent grains and yeast drying
In order to increase the protein content in spent grains, yeast can be mixed up withspent grains. This system combines an increase of the product value with mini-misation of the total investment. The dried product contains a percentage of 48%crude protein (highly digestive) as per the ratio of yeast and spent grains.
Yeast drying
VetterTec technology is also used for yeast drying in the brewing industry. Dry yeast con-tains more than 48% crude protein (highly digestive). It is a completely natural product,which is used as an animal fodder additive for ruminants, pigs, horses and poultry.
Complete system solution
VetterTec has the competence to deliver the complete system starting after the lauter tun/ filter up to the final bagging or truck loading.
What you get:
All technologies are group designed and manufactured
Best technology well selected for your application
Focused technologies and applications
Innovative and sophisticated solutions
Optimised and integrated drying processes
Cost effective solutions
For wet spent grains and wet yeast processing plants, VetterTecoffers the complete range of screw presses and dryers:
Applications
Collection of spent grains
Dewatering spent grains
Drying spent grains
Conveying
Storage
Drying yeast
Combination of drying yeast and spent grains
Pelletising spent grains
Best dewatering and drying technology for wet spent grains and wet yeast processing plants
Low powder temperature drying
Controlled particle size
Centrifugal and nozzle atomisers
VetterTec Yeast Spray Dryer
Indirect heating
Heated by saturated steam
Highly efficient
Low air flow
Lowering emissions
VetterTec Tube Bundle Dryer
Pre-dewatering system
Buffer tank extension
VetterTec ConveyorVetterTec Buffer Tank
Pre-dewatering wet spent grains
Prior to the drying section
Minimising drying energy
Continuous operating
VetterTec Screw Press
Storage of spent grains
Discharge of spent grains
Loading on truck
VetterTec Silo andDosing Screw
Increased productivity
Storage of wet spent grains
Continuous operating
Placed under the lauter tun
Wet Spent Grains Wet Yeast Dry Spent Grains Animal FoodWet Spent Grains Wet Yeast Dry Spent Grains Animal Food
Wet
Spen
tGra
ins
Dry Spent Grains
Wet
Yeas
t
„successful drying systems“
VT_Brewery_innen_150304-fin_Layout 1 04.03.15 11:31 Seite 1
