BESSEY Clamping to equipment and maschine tables
-
Upload
bessey-tool-gmbh-co-kg -
Category
Technology
-
view
215 -
download
5
description
Transcript of BESSEY Clamping to equipment and maschine tables
Clamping to equipment and machine tables
Simply better.
NEW products:
Self-adjusting
toggle clamps
2
Self-adjusting toggle clamps
Self-adjusting jaw height for rapid clamping
The power to be in position fast!
With the new self-adjusting toggle clamps from BESSEY, work pieces of differing heights can be clamped both quickly and securely. This makes them perfectly suited for use in small-scale production situations. However, it wouldn‘t be a BESSEY toggle lever clamp if our development team hadn‘t come up with another stand-out feature – true to our company motto “BESSEY. Simply better.” – which is the ability to automatically adjust to different work piece heights
while also maintaining constant clamping force. This makes time-consuming manual adjustment of the pressure screw a thing of the past. BESSEY toggle clamps have even more to offer when it comes to their flexibility; the clamping force can be optimized to the demands of the particular workpiece, simply by turning a set screw on the cantilevered joint. Furthermore, the hole pattern on the base plate has been designed to facilitate fast and secure clamping set-up. All this makes it an extremely – flexible clamping tool – give it a try!
3
1
3
4
2
1
3
2
4
Your benefits at a glance:
1 Automatic adjustment of the jaw height The BESSEY self adjusting toggle clamp automatically adjusts to the height of the particular work piece. The infinitely variable jaw height is up to 40 mm (1 O In.) for the horizontal toggle clamp and up to 16 mm (⅝ In.) for the push/pull clamp while the clamping force remains unchanged. This renders time-consuming manual adjustment of the pressure screw unnecessary.
2 Set screw on the cantilevered joint Using the set screw on the canti-levered joint, the clamping force can be adjusted to your particular require-ments, up to 2,500 N (550 lbs).
3 Hole pattern on the base plate The base plate, which is suitable for both metric and imperial, has been designed to facilitate fast and secure clamping set-up.
4 Ergonomic handle The plastic injection molded and ergo-nomically designed handle fits well in the hand and has a very good grip.
S imply better.
NEW
Self-adjusting toggle clamps
L 4L 3L 2
L 1L 5
H 4
H 3
H 1
H 5
H 2
L 5
B 1
B 2
B 3
B 4
Lo 4
L 6
L 7
Lo 3
Lo 1Lo 2
L 8
4
L1 L2 L3 L4 L5 L6 L7 L8 H1 H2 H3 H4 H5 B1 B2 B3 B4 Lo1 Lo2 Lo3 Lo4 Ø
STC-HH50
mm 210 66 40 23 115 64 50 53 46 155 13 50 20 13 8 26 57 25,4 25,4 38 32-44 6,3
" 8.27 2.60 1.57 0.91 4.53 2.52 1.97 2.09 1.81 6.10 0.51 1.97 0.79 0.51 0.31 1.02 2.24 1.00 1.00 1.50 1.26-1.73 0.25
STC-HH70
mm 210 66 40 23 115 64 50 53 64 175 13 68 38 13 8 26 57 25,4 25,4 38 32-44 6,3
" 8.27 2.60 1.57 0.91 4.53 2.52 1.97 2.09 2.52 6.89 0.51 2.68 1.50 0.51 0.31 1.02 2.24 1.00 1.00 1.50 1.26-1.73 0.25
Horizontal toggle clamp with open arm and horizontal base plate STC-HH
n In the clamped position, the lever is horizontal
n Automatic and infinitely variable adjust-ment of the clamping height up to 40 mm (1 O In.) while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws
n Clamping force is variable up to 2,500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint
n Sturdy, tempered metal sheets for a long service life
n Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial
n High-quality two-component plastic handle
Table of dimensions
Order-No. Opening Clamping force
a b c d e f x a b c d e f x
mm " N lbs. kg qty. VB0003
STC-HH50 40 1 O 2500 550 0.38 6STC-HH70 60 2 Z 2500 550 0.42 6
Self-adjusting toggle clamps
NEW
Tota
l len
gth
Leng
th o
f ext
ensi
on a
rm
Spin
dle
adju
stm
ent r
ange
Pres
sure
pla
te d
iam
eter
Leng
th o
f bas
e
Leng
th o
f bas
e pl
ate
1
Leng
th o
f bas
e pl
ate
2
Leng
th o
f 2-c
omp
hand
le
Heig
ht o
f han
dle
(dow
n)
Hei
ght o
f han
dle
(ope
n)
Heig
ht o
f ext
ensi
on a
rm
Heig
ht o
f spi
ndle
, cpl
.
Heig
ht o
f bas
e
Wid
th o
f ext
ensi
on a
rm
(ext
erna
l)
Wid
th o
f ext
ensi
on a
rm
(inte
rnal
)
Wid
th o
f 2-c
omp.
han
dle
Wid
th o
f bas
e pl
ate
Leng
th o
f hol
e sp
acin
g 1
Len
gth
of h
ole
spac
ing
2
Len
gth
of h
ole
spac
ing
3
Wid
th o
f elo
ngat
ed h
ole
Diam
eter
of h
ol
Order-No.
Lo 4
B 1
B 3
B 4
L 6
L 7
Lo 3
Lo 1Lo 2
L 8
L 4
L 1
L 5
H 1
H 5
H 2
L 5
5
L1 L2 L3 L4 L5 L6 L7 L8 H1 H2 H3 H4 H5 B1 B2 B3 B4 Lo1 Lo2 Lo3 Lo4 Ø
STC-IHH25
mm 225-245 – – 23 148 64 50 53 46 160 – – 20 12 – 26 57 25,4 25,4 38 32-44 6,3
" 8.86-9.65 – – 0.91 5.83 2.52 1.97 2.09 1.81 6.30 – – 0.79 0.47 – 1.02 2.24 1.00 1.00 1.50 1.26-1.73 0.25
n Movement of the handle is converted into an axial movement of the push/pull rod
n Automatic distance adjustment up to 16 mm (⅝ In.) with unchanged clamping force – without having to make manual changes to the position of the pressure screws
n Clamping force variable up to 2,500 N (550 lbs) depending on the adjustment of the set screw in the cantilevered joint
n Sturdy, tempered metal sheets for a long service life
n Hole pattern on the base plate facilitates fast and secure clamping set-up for metric and imperial
n High-quality two-component plastic handle
Push/pull clamp with horizontal base plate STC-IHH
Order-No. Opening Clamping force
a b c d e f x a b c d e f x
mm " N lbs. kg qty. VB0003
STC-IHH25 16 ⅝ 2500 550 0.42 6
Table of dimensions
Simply better.
Self-adjusting toggle clamps
NEW
Tota
l len
gth
Leng
th o
f ext
ensi
on a
rm
Spin
dle
adju
stm
ent r
ange
Pres
sure
pla
te d
iam
eter
Leng
th o
f bas
e
Leng
th o
f bas
e pl
ate
1
Leng
th o
f bas
e pl
ate
2
Leng
th o
f 2-c
omp
hand
le
Heig
ht o
f han
dle
(dow
n)
Hei
ght o
f han
dle
(ope
n)
Heig
ht o
f ext
ensi
on a
rm
Heig
ht o
f spi
ndle
, cpl
.
Heig
ht o
f bas
e
Wid
th o
f ext
ensi
on a
rm
(ext
erna
l)
Wid
th o
f ext
ensi
on a
rm
(inte
rnal
)
Wid
th o
f 2-c
omp.
han
dle
Wid
th o
f bas
e pl
ate
Leng
th o
f hol
e sp
acin
g 1
Len
gth
of h
ole
spac
ing
2
Len
gth
of h
ole
spac
ing
3
Wid
th o
f elo
ngat
ed h
ole
Diam
eter
of h
ol
Order-No.
6
Machine table clamp
For clamping onto the machine table
Rapid, powerful and safe when clamping to equipment
At BESSEY you will also find a range of practical work table clamps – ideal clamps for assembly, drilling, rubbing, milling, grinding, honing, eroding, testing and much more. Original BESSEY BAS clamps are characterised above all by their incredibly compact design and high clamping pressure. The housings and clamping arms are made from tempered stainless steel and are therefore extremely heavy duty – even after many years of use and in the most restricted spaces. The work table clamps BS and the claw machine
clamp GRS can be tilted and are infinitely adjustable. The BS identifies a lever mechanism that facilitates quick clamping and releasing. When unobstructed access to the work area is a requirement or when clamping has to be done in confined spaces, the claw machine clamp GRS provides the necessary function thanks to an externally-positioned spindle. And, thanks to its swivelling pressure plate, the BSG work table clamp also provides the answer when clamping sloping parts, up to 35 degrees. As you can see, a comprehensive product range of products that leaves virtually no desire unanswered!
1
1
1
2
2
2
3
3
4
54
5
7
Your benefits at a glance:
1 Housings and clamping arms made from tempered stainless steel BAS clamps are approx. 30 % smaller than comparable tools made by com-petitors and still provide the same high clamping forces. At a perpendicular to the jaw face, the self-locking worm gear unit exerts up to 16,000 N.
2 Clamping arm variants with polyamide seal To provide for gentle clamping with optimum weight distribution, the short and long clamping arms of the BAS models are equipped with a swivelling aluminium pressure shoe. And when clamping has to be done in corners, BSP models equipped with a pointed clamping arm are the perfect tools. A special polyamide seal protects the interior against dirt.
3 Open or closed fastening holes Models with an open hole can be clamped and unclamped more quickly. In closed versions, the screw, nut and clamp form a unit. All BAS clamps are easily fastened and released – thanks to the T bar wrench with an integrated hexagon ball head.
4 Time-saving automatic clamping and release system Only the BAS-U matic clamp is equipped with this function which automatically fastens and releases the work table clamp. During the clamping process, a hardened flat spring automatically presses on the underside of the screw head. Pressing on the release button on the back side releases it easily from the table.
5 Space saving and adjustable The compact design, both in height and surface requirements, distinguishes all of the models. Clamping height (up to 100 mm) can be increased progressively in 80 mm steps with the BESSEY BASO base unit. When using more than one base unit, care must be taken to provide precise workpiece contact surfaces.
S imply better.
Machine table clamp
r
a
b 95 x 35
b1
a 1
SW 11
SW 6
18 x 23
4,5
H
8
Order-No. Opening Throat depth
a b c d e f x a b c d e f x
mm mm kg qty. VB0003
BAS-U9-4 90 47 1.25 1BAS-U10-6 100 67 1.35 1BSP-U10-6 100 67 1.35 1
BAS-U matic clamp, fixing hole open
n Clamping force up to 16,000 N n Space-saving design n With time-saving automatic clamping and release system
n Fixing hole open for M 10 / M 12
Order-No. Opening Throat depth
a b c d e f x a b c d e f x
mm mm kg qty. VB0003
BAS-C9-4 88 40 1.30 1BAS-C10-6 97 60 1.30 1BSP-C10-6 97 60 1.30 1
BAS-C compact clamp, fixing hole open
n Clamping force up to 16,000 N n Space-saving design n Fixing hole open for M 10 / M 12
Order-No. Opening Throat depth
a b c d e f x a b c d e f x
mm mm kg qty. VB0003
BAS-CB 9-4 88 40 1.30 1BAS-CB10-6 97 60 1.30 1BSP-CB10-6 97 60 1.30 1
n Clamping force up to 16,000 N n Space-saving design n Fixing hole closed for M 10 / M 12
BAS-CB compact clamp, fixing hole closed
Machine table clamps
9
14
M12
M10
95 x 35
80
230
SW8SW10
SW11
45,5
9
mm mm mm mm mm mm DIN 912 N
BAS-U9-4 90 45 47 28 75 81 M 10 / M 12 16.000
BAS-U10-6 100 45 67 28 94 81 M 10 / M 12 12.000
BSP-U10-6 100 45 67 28 94 81 M 10 / M 12 12.000
BAS-C9-4 88 42 40 36,5 75 78 M 10 / M 12 16.000
BAS-C10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000
BSP-C10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000
BAS-CB9-4 88 42 40 36,5 75 78 M 10 / M 12 16.000
BAS-CB10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000
BSP-CB10-6 97 42 60 36,5 94 78 M 10 / M 12 12.000
BASO 80 – – – – 80 M 10 / M 12 –
Simply better.
Order- No. Opening height Fastening
thread
a b c d e f x a b c d e f x
mm kg qty. VB0003
BASO 80 M10 0.45 1
Base unit BASO
n 80 mm extension n Stackable n Fixing hole open, including cheese head screw
n Suitable for all BESSEY BAS clamps
n T bar wrench with adjustment tool for M 10/M 12 socket head screws
n Suitable for all BESSEY BAS clamps
Centring attachmentFastening thread
Fixing hole open
Table of dimensions BAS
Order-No.
Width across flats, allen key
Width across flats, ball head
Tommy bar length
a b c d e f x a b c d e f x
mm kg qty. VB0003
BASKN SW11 SW8-SW10 230 0.30 1
BASKN wrench with T-bar
Order- No.
Opening max. “a”
Opening opt. “a1”
Throat depth
“b”
Distance
“b1”
Clamping arm
“r”
Housing height
“H”
Socket head screws
Fixing hole
“Ø”
Clamping force max.
open
open
closed
open
Machine table clamps
H1
Fy a
L x B
b
x
b (max.)
y
x
F
H1
b (min.)
a
10
Order- No.
Clamping height max.
Throat depth
Rail profile
Fixing hole
a b c d e f x a b c d e f x
mm mm mm mm kg qty. VB0003
BS2N 200 100 19.5 x 9.5 10.5 1.35 1BS3N 200 120 22 x 10,5 13 1.55 1BS4N 200 120 28 x 11 16.5 2.65 1BS5N 240 140 30 x 15 16.5 3.30 1BS6N 500 140 30 x 15 16.5 4.00 1
Hold down table clamps BS
n Clamping force up to 10,000 N n Tilting and infinitely height-adjustable n For drilling and light milling work n Lever mechanism for rapid clamping and release
n Clamping force up to 7,500 N n Swivelling, vertically infinitely adjustable clamp
n Externally-positioned spindle to allow unobstructed access to the work area and clamping in confined spaces
n For drilling and light milling work
Claw machine clamp GRS
Order- No.
Clamping height max.
Throat depth
Rail profile
Fixing hole
a b c d e f x a b c d e f x
mm mm mm mm kg qty. VB0003
GRS20-12 200 123-140 28 x 11 16.5 2,90 1
Machine table clamps
H1
F
x
a
Ø
Ø 40b
122
115
11
mm mm mm mm mm mm mm mm mm mm N
BS2N 200 100 260 42 x 25 100 38 25 32 19,5 x 9,5 10,5 3.500
BS3N 200 120 260 42 x 25 100 38 25 32 22 x 10,5 13 5.500
BS4N 200 120 270 48 x 31 135 49 33 42 28 x 11 16,5 7.500
BS5N 240 140 320 48 x 31 135 49 33 42 30 x 15 16,5 10.000
BS6N 500 140 580 48 x 31 135 49 33 42 30 x 15 16,5 10.000
GRS20-12 200 123-140 265 25 x 35 135 48 33 42 28 x 11 16,5 7.500
BSG21-14 210 140 322 Ø 40 135 48 33 42 30 x 15 16,5 12.000
Order- No.
Clamping hight max.
Throat depth
Rail profile
Fixing hole
a b c d e f x a b c d e f x
mm mm mm mm kg St. VB0003
BSG21-14 210 140 30 x 15 16.5 3.22 1
Hold down table clamps BSG
n Clamping force up to 12,000 N n For fixing to tables and other equipment
n Pressure plate tilts to an angle of 35°, especially for clamping sloping parts
Simply better.
Table of dimensions BS, GRS, BSG
Order- No.
Opening max.
“a”
Throat depth
“b”
Hight of base
“H1”
Pressure plate dimensions
“L x B”
Foot „F“Rail
profile
“x”
Fixing hole
“Ø”
Achievable clamping force at a clamping
height of 50 mmFoot
length Foot
widthFoot
heightDistance to
the rail “y”
Machine table clamps
Simply better.
BESSEY. Simply better.
For more than 120 years, BESSEY has continually been setting standards in cutting and clamping systems. Our long-term research and develop-ment competence allows us to continuously create new, innovative pro-ducts. BESSEY‘s top quality products are produced from the highest qua-lity materials, using state-of-the-art techniques. This ensures the highest degree of comfort, safety, user-friendliness and ergonomics, so that you can also benefit from our unique innovation advantage. In accordance with our company motto: „BESSEY. Simply better.“
The BESSEY Product Development Department reserves the right for technical alterations.Errors and omissions excepted – to the best of our knowledge the information supplied is accurate.
www.bessey.deBESSEY Tool GmbH & Co. KG n P. O. Box 11 54 D-74301 Bietigheim-Bissingen n GermanyFon: +49 7142 401-0 n Fax: +49 7142 401-452E-Mail: [email protected]
3008
443
b x
x 02
/201
2