Matchmaker® Series BeltsEnsure all belts of same size and type will measure within ARPM matching limits

Nominal How to Obtain Inside or Outside Length

Section Top (in.) Width (in.) Up to 210 in. Add or Subtract Over 210 in. Add or Subtract

A, AX, 4L 1/2 .500 2.1 in. to/from Part # 2.1 in. to/from Part #

B, BX, 5L 21/32 .656 2.9 in. to/from Part # 1.4 in. to/from Part #

C, CX 7/8 .875 4.2 in. to/from Part # 2.2 in. to/from Part #

D, DX 1¼ 1.250 5.2 in. to/from Part # 2.7 in. to/from Part #

E 1½ 1.500 7.0 in. to/from Part # 3.5 in. to/from Part #

Belt Length Conversion^^Check belt type for measureme nt method

8mm

8mm

14.6mm

14mm

0.31"

0.38" 0.62"

0.53"0.91"

1.00"

3V / 3VX 5V / 5VX 8V

0.88"

0.53"

1.25"

0.75"

0.66"

0.41"

0.50"

0.31"

C D

A B

Manufactured in cut edged molded cog and envelope cut cog construction in 3V and 5V profiles depending on length and drive requirements; envelope non-cogged on all 8V’s.

0.14"

0.092"

0.165"

0.140"

0.51"

0.370"

0.38"

0.185"

0.12"

0.063"

J

Static conductive*

K*

H L M

Cut-edge=non-static conductive

Belts and SprocketsDrive Solutions that Drive Performance

› B – 0.66 inch top width, classical profile› X – Premium cogged construction

› 75 – Approximate 75 inch inside length

› 5V – 0.62 inch top width, narrow profile › 1400 – 140.0 inch standard effective length (envelope uncogged construction shown)

› 180 – 18.0 inch nominal outside length› J – J section Poly V› 4 – 4 ribs

*Check with Continental ContiTech for specific

static conductivity details.

› B – 0.66 inch top width, classical profile› Available roller lengths 250 feet and

500 feet

› D – Section available only in 250 foot roll lengths

› B – 0.66 inch top width, classical profile› 75 – Approximate 75 inch inside length

HY-T® Plus Available in E Sections

ELATECH®§ Polyurethane Belts Dual Positive Drive

HY-T® Wedge

Poly-V® Open End

Matchmaker®

Matchmaker®

Torque-Flex® Matchmaker®

Matchmaker®

®

†Various product styles include ELATECH® M (Open End), ELATECH® V (Jointed or Welded), iSYNC (cut to width sleeves) and ELA-flex SD™ (Truly Endless).

§ELATECH is a registered trademark of Elatech S.r.l .

› B – Blue = 14mm pitch › 35mm width

› 1750 – 1750mm belt length

› D – Dual sided› 225 – 22.5 inch belt length

› L – L-pitch, trapezoidal tooth profile› 050 – 0.50 inches wide

› 8GTR – 8mm pitch› 640 – 640mm belt length

› 12 – 12mm wide

› Metric T, AT and ATL› XL, L, H and XH› HTD

› STD› Self-tracking TK and ATK› Flat belt

35mm

70mm

14mm 8.6mm

16mm

8mm 5.3mm

32mm

8mm 5.3mm14mm

Yellow

Blue Green White

Orange Red Purple

8.6mm

52.5mm

14mm 8.6mm

105mm

14mm 8.6mm

64mm

8mm 5.3mmAll belt sizes static conductive*

0.50"

0.31"

0.66"

0.41"

1.25"

0.75"

0.88"

0.53"

A

C

B

D

All belt sizes static conductive*

0.31"

0.50" 0.66"

0.41"0.53"

0.88"

(Side View)

Cut edge, molded cog on all AX sizes, BX up to 136 inches, CX up to 136 inches. All others are envelope cut cog construction.

All belt sizes static conductive*

All belt sizes static conductive*

All belt sizes static conductive*

14mm

8mm

5.8mm 9.8mm

All belt sizes static conductive*

Sample Size: B1750

14mm

8mm

Sprockets®

› GTR – Falcon Pd® sprocket› 22G – 22 grooves/teeth

› 8M – 8mm pitch length› 12 – Matches 12mm belt

Sample Size: GTR-22G-8M-12

Sample Size: D225L050

Sample Size: B75

Sample Size: BX75

› 5/ – 5 rib joined construction› 8V – 1.00 inch top width, narrow profile rib› 1900 – 190.0 inch standard effective length

› Single envelope ply on 5Vs, 2 envelope plies on 8Vs (cut edge, molded cog construction shown)

HY-T® Wedge Torque Team® Matchmaker®

5V, 8V

3VX, 5VX (Side View)

3VX, 5VX

Manufactured in 3V, 5V and 8V cross sections with envelope construction in lengths over 136 inches and cut edge cogged, construction in lengths 136 inches and under. Cogged belts are designated with 3VX and 5VX.All belt sizes static conductive*

Sample Size: 5/8V1900

› 3V – 0.38 inches top width, narrow profile › 950 – 95.0 inches nominal outside length (envelope uncogged construction shown)

Matchmaker®®WEDGE

Manufactured in 3V, 5V and 8V cross sections with a unique dual envelope non-cogged construction.

0.31"

0.38" 0.62"

0.53"0.91"

1.00"

3VT 5VT 8VT

All belt sizes static conductive*

Sample Size: 3V950

Sample Size: 8GTR-640-12

8mm

8mm

14.6mm

14mm

Dual Hi-Performance ®

› D – Dual sided› 1040 – 1040mm belt length

› 8M – 8mm pitch round tooth profile› 20 – 20mm wide

Sample Size: D1040 8M 20

Sample Size: 5V1400

› 3/ = 3 rib joined construction› B – 0.66 inch top width, classical profile rib› X – Premium cogged construction

› 112 – Approximate 112 inches inside length (envelope uncogged construction shown)

HY-T® Torque Team® Matchmaker®

(Side View)

Manufactured in standard classical BX and CX cross sections with cut edge, cogged construction in lengths 136 inches and under.

Manufactured in standard classical B, C and D cross sections with envelope construction in lengths over 136 inches.

All belt sizes static conductive*

Sample Size: 3/BX112

› 5/ – 5 rib joined construction› 5V – 0.62 inch top width, narrow profile rib

› L – Laminated construction› 800 – 80.0 inch standard effective length

Torque Team® (Laminated) Matchmaker®

Sample Size: 5/5VL800

10mm

8mm

13mm

10mm

22mm

18mm

17mm

14mm

XPZ XPB/SPBXPA/SPA

XPC/SPC

Raw edge, molded cog on all PZ sizes, PA up to 3350, PB up to 3650, PC up to 3750

› X – Premium cogged construction› PA – Metric A profile› 0707 – 707mm datum length

› XP indicates REMC construction› SP indicates envelope construction

Metric Matchmaker®

Sample Size: XPA0707

16mm

8mm 5.3mm

35mm

Yellow White

Blue

Orange

Green

Red

M

L

14mm 8.6mm

52.5mm

14mm 8.6mm

32mm

8mm 5.3mm

50mm

8mm 5.3mm

105mm

14mm 8.6mm

70mm

14mm 8.6mm

25mm

8mm 5.3mm

Acculinear®

› R – 14mm pitch, 105mm width› PU – Polyurethane steel cord

› STD – Standard construction

Sample Size: R14PU105STD PITCHES†

› 5/ – 5 ribbed joined construction› 5V – 0.62 inch top width, narrow profile rib › F – Torque Team Plus® with aramid

tensile member

› 1900 – 190.0 inch standard effective length› Single envelope ply on 5Vs, 2 envelope

plies on 8Vs

Torque Team Plus®

5VF/8VF

All belt sizes static conductive*

Sample Size: 5/8VF1900

› B – 0.66 inch top width, classical profile› 47 – Approximate 47 inch inside length› F – Aramid tensile member

› 85500 – Lawn and garden equivalent part number

Aramid ClassicalPOWER POWER

POWER

0.31"

0.50" 0.66"

0.41" 0.53"

0.88"

A B C

All belt sizes static conductive*

Sample Size: B47F 85500

Sample Size: 180J4

0.50"

0.31"

0.66"

0.38"

0.38"

0.22"

0.25"

0.16"

4L 5L

2L 3L

› 4L – 0.50 inch top width › 560 – 56.0 inch nominal outside length (Cut edge melted cog construction shown)

FHP

Sample Size: 4L560

8mm

17mm 33mm 37mm 54.5mm

65mm

8mm 14mm 14mm

14mm14mm8mm

107mm72mm

Yellow Blue GreenWhite

Orange RedPurple

Sprockets

› Y – Matches Yellow belts› 28 – Number of grooves

› S – Sprocket› SH – Hub to match SH bushing

Sample Size: Y-28S-SH

2.3mm

3mm

3.6mm

5mm

5.7mm

8mm

20mm

13.8mm

14mm

10.7mm

Positive Drive ® Available in 13 inch sleeveSuper Torque ® ®

› 100 – 10.0 inch belt length› XL – Pitch, trapezoidal tooth profile

› 025 – 0.25 inch wide› 800 – 800mm belt length› 8M – 8mm pitch, round tooth profile

› 50 – 50mm wide› 100 – 10mm width› S – Super Torque Positive Drive® belt

› 4.5M – 4.5mm pitch, modified round tooth profile

› 175 – 175mm belt length

0.080"

0.045"MXL XL L

H XH*

XXH*

0.200"

0.09"

0.875"

0.44"

0.500"

0.16"

1.250"

0.62"

0.375"

0.14"

Static conductive*Static conductive*

1.9mm

3mm 4.5mm 5mm

14mm8mm

2.8mm 3.4mm

10.2mm5.3mm

Static conductive*

®

Sample Size: 100XL025

®BLACKHAWK

› 800 – 800mm belt length› 8M – 8mm pitch, universal tooth profile

› 8H – Blackhawk Pd®› 35 – 35mm wide

14mm

8mm

5.7mm 10.7mm

All belt sizes static conductive*

Sample Size: 800 8M BH 35

®HAWK

Sample Size: 800 8M 50Sample Size: 100S4.5M175

Cut edge construction

› 32 – 32/16 inch top width› 26 – Angle of sheave groove

› V – Variable speed profile with aramid tensile member

› 585 – 58.5 pitch length

Variable Speed

Sample Size: 3226V585

Sample Size: B OPEN END

› BB – B section double, classical profile› 0.66 inch center width

› 75 – Approximate 75 inch inside length

Hex0.50"

0.41"

0.66"

0.53"

0.88"

0.66"

0.88"

0.86"

CC CCP

AA BB

All belt sizes static conductive*

Sample Size: BB75

Commonly referred to as a “chip and saw” belt

5VL

All belt sizes static conductive*

®

*Drive conditions and service variables in combination with time in operation can result in loss of static conductivity. It is recommended that a conductivity check be added to drive preventative maintenance programs where belt static conductivity is a requirement. For more information on static conductivity, visit us at www.contitech.us.

Some sizes and belt types are not to scale. Illustrations are representative of the product group, and may not represent all products and variations of the group.

The content of this publication is provided for information only and without responsibility. ContiTech AG’s obligations and responsibilities regarding its products are governed solely by the agreements under which they are sold. Unless otherwise agreed in writing, the information contained herein does not become part of these agreements. This publication does not contain any guarantee or agreed quality of ContiTech AG’s products or any warranty of merchantability, fitness for a particular purpose and non-infringement. ContiTech AG may make changes in the products or services described at any time without notice. This publication is provided on an “as is” basis. To the extent permitted by law, ContiTech AG makes no warranty, express or implied, and assumes no liability in connection with the use of the information contained in this publication. ContiTech AG is not liable for any direct, indirect, incidental, consequential or punitive damages arising out of the use of this publication. Information contained herein is not intended to announce product availability anywhere in the world. © 2014 ContiTech AG. All rights reserved.

Continental ContiTech also offers a wide range of bushings, V-belt sheaves, synchronous belt sprockets, flat belt pulleys, flywheels and other metal power transmission products.

20

78

18

48