Belt Tracking for Belt Conveyor
Transcript of Belt Tracking for Belt Conveyor
-
8/18/2019 Belt Tracking for Belt Conveyor
1/2
Belt Tracking
Pulley Crowns
Crowning one or several pulleys in a belt system is the most common way oftracking a belt. For flat power transmission belts and narrow conveyor belts
(200mm wide), a radius crown is used. For wider conveyor belts, typically, atrapeoidal crown is applied. !ote" !ever utilie an ape# crown$
Radius Crown Specifcations or Flat Belt Pulleys
% radius crown represents a great wayto track a belt. &imensionally, it does
not take a big crown height in order forthe belt to track properly, and
e#ceeding the seemingly smallamounts below will actually do more
harm than good$
'n a system with multiple pulleys,
crown the pulleys that turn the sameway.
Standard Radius Crown Height hPulley Face
Width Wp
Pulley Diameter D25-15 15-
!
!-" "-
1
1-
15
#15
mm mm mm mm mm mm mm
25-125 0. .2 .* .+ 2.0 2.
125-25 .0 .* . 2.0 2.* 2.
25-$ . .- .+ 2.2 2. *.0
#$ .2 . 2.0 2. *.0 *.
he min. pulley face width /p (belt width /b # .) 1 mm.
he ma#. belt width /b (pulley face width /p mm) 3 .0
http://www.visusa.com/glossary.htm#apexhttp://www.visusa.com/glossary.htm#apex
-
8/18/2019 Belt Tracking for Belt Conveyor
2/2
Trapezoidal Crown Specifcations or Conveyor Pulleys
Pulley Diameter D Crown Height hmm mm
25 to " 0.*
" to 1 0.-*
1 to 15 0.4
15 to 2 0..44
2 to 2% 0.4
2% to !5 .04#!5 .-
&ote' he cylindrical part of the pulley /c is half of the belt width /b.
%lso, it is recommended for the pulley width /p to be appro#imately0 to 205 wider than the belt width /b for the pulley crown to
function properly. For pulley widths less than 200mm, use a radiuscrown and refer to the flat belt pulley specifications above.