Belt Sander Is
-
Upload
4u6ogj8b9snylkslkn3n -
Category
Documents
-
view
5 -
download
0
description
Transcript of Belt Sander Is
-
5/27/2018 Belt Sander Is
1/3
Sharing your passion for making jewelry.
Products. Service. Know-how.
Wolf ToolsBelt SanderDesigned to revolutionize your finishing processes.
800.545.6566 www.riogrande.com
Caution! Wear safety glasses and NIOSHapproved dust mask when using this belt sander.
Tie back long hair and tuck it into your shirt. When
using the sander, keep fingers, hair, loose clothing,
children and pets away from sanding belt. Allow
pieces that are being or have just been sanded to
cool off to avoid inadvertantly burning your fingers.
Assembly1. Attach the clamp on the Wolf belt sander securely to your bench or
work surface.
2. With the flex shaft unplugged, loosen the post bolt, insert the clamp
rod or BenchMate adapter all the way into the hole then tighten well.
Loosen clamp knob to adjust angle, then tighten well.
3. Attach the belt sander to the flex shaft before putting on a sanding
belt. Keep hands away from rollers. With flex shaft running at a slow
speed, gently insert the tip of the flex shaft into the collar. When the
rollers are spinning, take your foot off pedal and push the flex shaft
into the collar. To remove the flex shaft from the belt sander, turn off
the flex shaft. Then pull back the retractable collar on the belt sander
and pull the flex shaft out.
4. Unplug the flex shaft when adjusting or changing belts or adjusting
the angle of the sander. To put a belt on, loosen nut on side of sander,
allowing the middle roller to pivot up. Slide the belt on, put pressure
on middle roller, and tighten the nut.
2
1
3 4
-
5/27/2018 Belt Sander Is
2/3
2012 The Bell Group, Inc. All rights reserve
800.545.6566 www.riogrande.com
Belt Sander
The Wolf Belt Sander can be worked at any
position that makes sense for your desired
task, including on the end, on the flat plate
on the top, or between the wheels on
the back (figs. AC) The Wolf belt sander
is ideal for sprue removal, bench work,
graver/chisel sharpening; tool making
and modification and more.The optional GRS Adapter (fig. D; not
included) fits into the GRS pivoting
BenchMate collar (fig. E; not included).
This allows for the easiest, infinite-angle
positioning, including upside-down
positioning so that you can work between
the rollers.
This Wolf belt sander includes five assorted
ruby belts (80, 120, 180, 240 and 320 grit).
A full selection of Imperial Microfinishing,
Diamond Microfinishing, Trizact, and
Regal XO Dust Belts by 3M (ranging from
80 to 30,000 grit) are also available.
A vacuum cleaner may be attached to
the plastic tube to remove dust particles.
To keep the pieces you are sanding from
being sucked into the vacuum, put a
piece of plastic screening, available from
hardware stores, over the end of the tube
(fig. G) before attaching the vacuum hose
(fig. H).
A
C
E
G
B
D
F
H
BenchMate collar
-
5/27/2018 Belt Sander Is
3/3