Belt Conveyor Systems - · PDF file5 PEC Products belt conveyor systems 1. General...
Transcript of Belt Conveyor Systems - · PDF file5 PEC Products belt conveyor systems 1. General...
BeltConveyor
Systems
V 3
2
PEC Products belt conveyor systems WWW.PEC.BE
3
PEC Products belt conveyor systems WWW.PEC.BE
1. General information
1.1 Introduction
Our Mission :
It is our aim to develop, engineer and manufacture industrial products with new technologies, in changing environments and several types of industries, to full customer satisfaction.
Our Activities :
Being a leading partner in the international market for automation, our company founded in 1984 is committed to develop, engineer and implement new products and technology, with a strong focus to your needs.
Our Products :
Our belt conveyor systems (BCS) are designed with sturdy, modular components that assure durability.
Pec Products belt conveyors frame sections and support legs are fabricated of extended and anodized aluminium profiles. This offers the possibility to extend and adapt the system to your needs whenever it is required.
The design of the drive components is based on our extensive experience and on customer demands that have to be taken into account like : modularity, space requirements, flexibility and reliability.
Our components for multifunctional use decrease the investment cost substantially and offer high quality, sturdy and reliable solutions.
4
PEC Products belt conveyor systems WWW.PEC.BE
1. General information
1.2 Index
1. General 1.1 Introduction 3 information 1.2 Index 4 1.3 Applications 5 2. Conveyor 40 2.1 General overview 6 2.2 Technical data 7 2.3 Belt Conveyor 40 with indirect Front drive (BCF 40 i) 8 2.4 Belt Conveyor 40 with direct Front drive (BCF 40 d) 9 2.5 Belt Conveyor 40 with Middle drive (BCM 40) 10
3. Conveyor 80 3.1 General overview 12 3.2 Technical data 13 3.3 Belt Conveyor 80 with indirect Front drive (BCF 80 i) 14 3.4 Belt Conveyor 80 with direct Front drive (BCF 80 d) 15 3.5 Belt Conveyor 80 with Middle drive (BCM 80) 16 3.6 Belt Conveyor 80 with Drum Motor (BCD 80) 17
4. Conveyor 120 4.1 General overview 18 4.2 Technical data 19 4.3 Belt Conveyor 120 with indirect Front drive (BCF 120 i) 20 4.4 Belt Conveyor 120 with direct Front drive (BCF 120 d) 21 4.5 Belt Conveyor 120 with Middle drive (BCM 120) 22 5. Modular Conveyor 80 5.1 General overview 24 5.2 Technical data 25 5.3 Modular Belt Conveyor 80 with indirect Front drive (MBCF 80 i) 26 5.4 Modular Belt Conveyor 80 with direct Front drive (MBCF 80 d) 27
6. Conveyor parts 6.1 Support leg sets 28 6.2 Applications 29
7. Small Conveyor 7.1 Applications 30 Belts with 7.2 SBC Types 31 internal motor
8.. How to order - The fastest way for a personal quotation 36
9. Alphabetic 38 register
5
PEC Products belt conveyor systems WWW.PEC.BE
1. General information
1.3 Applications
Since the size, shape and weight of the materials to be transported can vary over a wide range PEC Products provides you with the most suitable solution for your applications.
Our systems are the preferred solution in sectors such as : packaging, electronics, machine construction, automotive, pharma, food, ...
Using very small return sets, the PEC Products conveyors provide maximum belt width in the most narrow space.
Due to our “Customer made” program you can choose conveyors (front drive, middle drive, knife edge(s), drummotor, ...) with a width ranging from 40 up to 1600 mm. For a quick delivery you can order our standard program including following widths : W = 40, 80, 218, 318, 618, 1218 mm.
The use of an aluminium profile based structure makes these conveyors flexible and easy to mount.
6
PEC Products belt conveyor systems WWW.PEC.BE
2. Conveyor 40
2.1 General overview
7
PEC Products belt conveyor systems WWW.PEC.BE
2. Conveyor 40
2.2 Technical data
Type 40 Type profile : Profile 40 x 40 light with Nut 8 Frame width (W) : min.: 40 mm max.: 500 mm Standard frame width (W) : 40 mm > belt width 30 mm 80 mm > belt width 70 mm 218 mm > belt width 208 mm 318 mm > belt width 308 mm 418 mm > belt width 408 mm
Center distance (L) : min.: 400 mm max.: 6000 mm
Speed : 2 - 50 m/min
Roll diameter : 44 mm
Max. conveying weight : 200 kg (depending on conveyor dimensions) Belt material : - Standard conveyor belt - High duty conveyor belt - Food conveyor belt - Special
Motor : 0.06 - 0.12 - 0.18 - 0.25 - 0.55 kW
Knife edge : max width 400mm
Side guidance : - fixed (slide plate type B) - variable
8
PEC Products belt conveyor systems WWW.PEC.BE
2. Conveyor 40
2.3 Belt Conveyor 40 with indirect Front drive
(BCF 40 i)
The conveyors 40 are ideal for light weight applications of all kinds. The small exterior dimensions ensure compact designs. The motor is installed under the belt in order to minimize the loss of belt width.
Belt Conveyor 40 with indirect Front drive Complete conveyor system based on profile and rollers 40 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 7) 1 set Slide Plate Type A/B 1 set Conveyor Frame 40 1 set Return Roller Set D44 2 set Return Support Set 40 1 set Driven Roller Set D44 1 set Driven Support Set 40 1 set Indirect Front Drive Motor Plate Set 40 1 pce. Timing Belt Drive Cover 40 1 set Motor Shaft Set 1 pce. Worm Geared Motor 2 pce. Timing Pulley 2 set Timing Pulley Fastening Set 1 pce. Timing Belt 1 pce. Conveyor Belt
1 assembled system BCF 40 i 10-0-001
(Please fill in questionnaire on p 36 when ordering)
9
PEC Products belt conveyor systems WWW.PEC.BE
2. Conveyor 40
2.4 Belt Conveyor 40 with direct Front drive (BCF 40 d)
On the conveyor 40 with direct front drive the motor is placed vertical or horizontal on to the left or right side of the driven shaft. No need for costly extras such as timing pulley’s, belt and special protections.
Belt Conveyor 40 with direct Front drive Complete conveyor system based on profile and rollers 40 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 7) 1 set Slide Plate Type A/B 1 set Conveyor Frame 40 1 set Return Roller Set D44 2 set Return Support Set 40 1 set Driven Roller Set D44 2 set Driven Support Set 40 1 set Hollow Shaft Set 1 pce. Worm Geared Motor 1 set Torque arm set 1 pce. Conveyor Belt 1 assembled system BCF 40 d 10-0-006
(Please fill in questionnaire on p 36 when ordering)
10
PEC Products belt conveyor systems WWW.PEC.BE
Belt Conveyor 40 with Middle drive Complete conveyor system based on profile and rollers 40 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 7) 1 set Slide Plate Type A/B 1 set Conveyor Frame 40 2 set Return Roller Set D44 4 set Return Support Set 40 1 set Driven Roller Set D84 2 set Auxiliary Roller Set D44 1 set Middle Drive Plate Set 40 1 set Torque Arm Set 1 set Hollow Shaft Set 1 pce. Worm Geared Motor 1 pce. Conveyor Belt
1 assembled system BCM 40 10-0-003
(Please fill in questionnaire on p 36 when ordering)
2. Conveyor 40
2.5 Belt Conveyor 40 with Middle drive
(BCM 40)
The middle drive is usually chosen when operations are required in both directions. The motor is placed vertical or horizontal on to the left or right side of the driven shaft.The middle-placed motor has as an advantage that both the belt ends are free and fit in narrow spaces.
11
PEC Products belt conveyor systems WWW.PEC.BE
12
PEC Products belt conveyor systems WWW.PEC.BE
3. Conveyor 80
3.1 General overview
13
PEC Products belt conveyor systems WWW.PEC.BE
Type 80
Type profile : Profile 80 x 40 light with Nut 8 Frame width (W) : min.: 40 mm max.: 800 mm Standard frame width (W) : 80 mm > belt frame 70 mm 218 mm > belt frame 208 mm 318 mm > belt frame 308 mm 418 mm > belt frame 408 mm 618 mm > belt frame 608 mm
Center distance (L) : min.: 450 mm max.: 6000 mm
Speed : 4 - 70 m/min
Roll diameter : 84 mm
Max. conveying weight : 300 kg (depending on conveyor dimensions) Belt material : - Standard conveyor belt - High duty conveyor belt - Food conveyor belt - Special
Motor : 0.06 - 0.12 - 0.25 - 0.55 kW
Knife edge : max width 500mm
Side guidance : - fixed (slide plate type B) - variable
3. Conveyor 80
3.2 Technical data
14
PEC Products belt conveyor systems WWW.PEC.BE
3. Conveyor 80
3.3 Belt Conveyor 80 with indirect Front drive (BCF 80 i)
The conveyors 80 are ideal for applications of all kinds. The small exterior dimensions ensure compact designs. The motor is installed under the belt in order to minimize the loss of belt width.
Belt Conveyor 80 with indirect Front drive Complete conveyor system based on profile and rollers 80 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 13) 1 set Slide Plate Type A/B 1 set Conveyor Frame 80 1 set Return Roller Set D84 2 set Return Support Set 80 1 set Driven Roller Set D84 1 set Driven Support Set 80 1 set Indirect front drive Motor Plate Set 80 1 pce. Timing Belt Drive Cover 80 1 set Motor Shaft Set 1 pce. Worm Geared Motor 2 pce. Timing Pulley 2 set Timing Pulley Fastening Set 1 pce. Timing Belt 1 pce. Conveyor Belt
1 assembled system BCF 80 i 10-0-002
(Please fill in questionnaire on p 36 when ordering)
15
PEC Products belt conveyor systems WWW.PEC.BE
3. Conveyor 80
3.4 Belt Conveyor 80 with direct Front drive (BCF 80 d)
On the conveyor 80 with direct front drive the motor is placed vertical or horizontal on to the left or right side of the driven shaft. No need for costly extras such as timing pulley’s, belt and special protections.
Belt Conveyor 80 with direct Front drive Complete conveyor system based on profile and rollers 80 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 13) 1 set Slide Plate Type A/B 1 set Conveyor Frame 80 1 set Return Roller Set D84 2 set Return Support Set 80 1 set Driven Roller Set D84 2 set Driven Support Set 80 1 set Hollow Shaft Set 1 pce. Worm Geared Motor 1 set Torque arm set 1 pce. Conveyor Belt
1 assembled system BCF 80 d 10-0-007
(Please fill in questionnaire on p 36 when ordering)
16
PEC Products belt conveyor systems WWW.PEC.BE
3. Conveyor 80
3.5 Belt Conveyor 80 with Middle drive (BCM 80)
The middle drive is usually chosen when operations are required in both directions. The motor is placed vertical or horizontal on to the left or right side of the driven shaft.The middle-placed motor has as an advantage that both the belt ends are free and fit in narrow spaces.
Belt Conveyor 80 with Middle drive Complete conveyor system based on profile and rollers 80 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 13) 1 set Slide Plate Type A/B 1 set Conveyor Frame 80 2 set Return Roller Set D84 4 set Return Support Set 80 1 set Driven Roller Set D84 2 set Auxiliary Roller Set D84 1 set Middle Drive Plate Set 80 1 set Torque Arm Set 1 pce. Worm Geared Motor 1 pce. Conveyor Belt
1 assembled system BCM 80 10-0-004
(Please fill in questionnaire on p 36 when ordering)
17
PEC Products belt conveyor systems WWW.PEC.BE
3. Conveyor 80
3.6 Belt Conveyor 80 with Drum Motor
(BCD 80)
The BCD 80 is extremely compact and requires virtually no maintenance. Thanks to its compact design the drum motor can be fit into the conveyor frame.
Belt Conveyor 80 with Drum Motor Complete conveyor system based on profile and rollers 80 with variable or standard width (W) and length (L) (Advisable L 2 x W) (See technical data on p 13) 1 set Slide Plate Type A/B 1 set Conveyor Frame 80 1 pce. Drum motor with PVC roller covering 1 pce. Conveyor Belt 2 set Drum Motor Support Set 80 1 set Return Roller Set D84 2 set Return Support Set 80
1 assembled system BCD 80 10-0-005
(Please fill in questionnaire on p 36 when ordering)
18
PEC Products belt conveyor systems WWW.PEC.BE
4. Conveyor 120
4.1 General overview
19
PEC Products belt conveyor systems WWW.PEC.BE
Type 120 Type profile : Profile 120 x 40 light with Nut 8
Frame width (W) : min.: 218 mm max.: 1600 mm
Standard frame width (W) : 218 mm > belt width 208 mm 318 mm > belt width 308 mm 418 mm > belt width 408 mm 618 mm > belt width 608 mm 1218 mm > belt width 1208 mm
Center distance (L) : min.: 470 mm max.: 6000 mm
Speed : 6 - 113 m/min
Roll diameter : 124 mm
Max. conveying weight : 600 kg (depending on conveyor dimensions)
Belt material : - Standard conveyor belt - High duty conveyor belt - Food conveyor belt - Special
Motor : 0.06 - 0.12 - 0.25 - 0.55 kW
Knife edge : max width 800mm Side guidance : - fixed (slide plate type B) - variable
4. Conveyor 120
4.2 Technical data
20
PEC Products belt conveyor systems WWW.PEC.BE
4. Conveyor 120
4.3 Belt Conveyor 120 with indirect Front drive (BCF 120 i)
Belt Conveyor 120 with indirect Front drive Complete conveyor system based on profile and rollers 120 with variable or standard width (W) and length (L) (Advisable L / 2 x W) (See technical data on p 19) 1 set Slide Plate Type A/B 1 set Conveyor Frame 120 1 set Return Roller Set D124 2 set Return Support Set 120 1 set Driven Roller Set D 124i 1 set Driven Support Set 120 1 set Indirect Front Drive Motor Plate Set 124 1 pce. Timing Belt Drive Cover 120 1 set Motor Shaft Set 20 1 pce. Worm Geared Motor 2 pce. Timing Pulley 2 set Timing Pulley Fastening Set 20 1 pce. Timing Belt 1 pce. Transport Belt 1 assembled system BCF 120 i 10-0-008 (Please fill in questionnaire on p 36 when ordering)
21
PEC Products belt conveyor systems WWW.PEC.BE
4. Conveyor 120
4.4 Belt Conveyor 120 with direct Front drive (BCF 120 d)
Belt Conveyor 120 with direct Front drive Complete conveyor system based on profile and rollers 120 with variable or standard width (W) and length (L) (Advisable L / 2 x W) (See technical data on p 19) 1 set Slide Plate Type A/B 1 set Conveyor Frame 120 1 set Return Roller Set D124 2 set Return Support Set 120 1 set Driven Roller Set D124d 2 set Driven Support Set 120 1 pce. Worm Geared Motor 1 set Torque arm set 1 pce. Transport Belt 1 assembled system BCF 120 d 10-0-009
(Please fill in questionnaire on p 36 when ordering)
22
PEC Products belt conveyor systems WWW.PEC.BE
4. Conveyor 120
4.5 Belt Conveyor 120 with Middle drive (BCM 120)
Belt Conveyor 120 with Middle drive Complete conveyor system based on profile and rollers 40 with variable or standard width (W) and length (L) (Advisable L / 2 x W) (See technical data on p 19) 1 set Slide Plate Type A/B 1 set Conveyor Frame 120 2 set Return Roller Set D124 4 set Return Support Set 120 1 set Driven Roller Set D124 2 set Auxiliary Roller Set D124 1 set Middle Drive Plate Set 120 1 set Torque Arm Set 1 set Hollow Shaft Set 1 pce. Worm Geared Motor 1 pce. Transport Belt
1 assembled system BCM 120 10-0-010
(Please fill in questionnaire on p 36 when ordering)
23
PEC Products belt conveyor systems WWW.PEC.BE
24
PEC Products belt conveyor systems WWW.PEC.BE
5. Modular Conveyor 80
5.1 General overview
front endmiddle
Construction
Our Modular Belts are constructed with modules molded from thermo-plastic materials with solid plastic rods. The all plastic design promotes long life and superior performance in many applications. Multiple widths are achieved by using a “brick-layed” pattern, which also provides high lateral and diagonal belt strength and stiffness.
indirect
direct
Advantages
· M o r e d e s i g n p o s s i b i l i t i e s in many mater ia ls to meet a w ide range o f opera t ing temperatures, chemical resistance and application requirements.· Superior Molding Quality reduces downtimes and maintenance cost and increases safety.· Reduced time and cost for cleaning.· Positive drive and tracking with the sprockets.
sprocket
bricklayed pattern
25
PEC Products belt conveyor systems WWW.PEC.BE
Type 80 Type profile : Profile 80 x 40 light
Belt width (W-8) : min.: 100 mm max.: 1200mm in increments of 50mm
Standard frame width W : W = i x 50+8 with i = 2,3,...
Center distance (L) : min.: 470 mm max.: 6000 mm
Speed : 5 - 116 m/min
Sprocket’s pitch diameter : 99 mm
Max. conveying weight : 175 kg (depending on conveyor dimensions)
Belt material : - Modular Flat Top conveyor belt - Modular Grip Top conveyor belt - Modular Flush Grid conveyor belt - Modular Raised Rib conveyor belt
Flights: Height: 25mm-100mm
Motor : 0.06 - 0.12 - 0.25 - 0.55 kW Side guidance : - sideguards on belt - fixed (slide plate type B) - variable
5. Modular Conveyor 80
5.2 Technical data
26
PEC Products belt conveyor systems WWW.PEC.BE
Modular Belt Conveyor 80 with indirect Front drive Complete conveyor system based on profile and sprockets with variable or standard width (W) and length (L) (Advisable L / 2 x W) (See technical data on p 25) 1 set Slide Plate Type A/B 1 set Conveyor Frame 80 1 set Return Shaft Set Link 80 2 set Return Support Set Link 80 1 set Driven Support Set Link 80 1 set Driven Shaft Set Link 80 1 set Motor Plate Set Link 80 1 pce. Timing Belt Drive Cover 80 1 set Motor Shaft Set 1 pce. Worm Geared Motor 2 pce. Timing Pulley 2 set Timing Pulley Fastening Set 1 pce. Timing Belt 1 pce. Modular Belt 1 assembled system MBCF 80 i 10-0-011 (Please fill in questionnaire on p 36 when ordering)
5. Modular Conveyor 80
5.3 Modular Belt Conveyor 80 with indirect Front drive
(MBCF 80 i)
Our Modular Belts are constructed with modules molded from thermoplastic materials with solid plastic rods. The all plastic design promotes long life and superior performance in many applications. Multiple widths are achieved by using a “brick-layed” pattern, which also provides high lateral and diagonal belt strength and stiffness.
27
PEC Products belt conveyor systems WWW.PEC.BE
Modular Belt Conveyor 80 with direct Front drive Complete conveyor system based on profile and rollers 120 with variable or standard width (W) and length (L) (Advisable L / 2 x W) (See technical data on p 25) 1 set Slide Plate Type A/B 1 set Conveyor Frame 80 1 set Return Shaft Set Link 80 2 set Return Support Set Link 80 1 set Driven Shaft Set Link d 80 2 set Driven Support Set Link 80 1 pce. Worm Geared Motor 1 set Torque arm set 1 pce. Modular Belt
1 assembled system MBCF 80 d 10-0-012
(Please fill in questionnaire on p 36 when ordering)
5. Modular Conveyor 80
5.4 Modular Belt Conveyor 80 with direct Front drive
(MBCF 80 d)
28
PEC Products belt conveyor systems WWW.PEC.BE
6. Conveyor parts
6.1 Support leg sets
Stand-alone Leg Frame Set11-1-008
L-based Foot Set11-1-015
Knuckle Foot D40 Set11-1-017
Knuckle Foot D40 Set 11-1-017 + L-based Foot Set 11-1-015
L-based Fixed Foot Set11-1-016
Knuckle Foot D80 Set11-1-018
Leg Brace Start Set 4011-1-011
Leg Frame Set 4011-1-009
Leg Frame Set 8011-1-010
Leg Connection Set 8011-1-004
Leg Connection Set 4011-1-003
Leg Connection Set AL11-1-007
Leg Connection Set ST11-1-006
Leg Connection Set Km11-1-005
Leg Connection Sets
Leg Frame Sets+ Leg Brace Sets
Leg Foot Sets
29
PEC Products belt conveyor systems WWW.PEC.BE
6. Conveyor parts
6.2 Applications
Knife edge with support set and base plates
Steering rollers are
used for tensioning
and steering the
belt in combination
with the knife-edge.
The steering rollers
are adjustable at
both ends.
Middle drive plate set with motor, driven roller and aux-iliary rollers for tensioning of the belt
Indirect front drive motor plate sets
30
PEC Products belt conveyor systems WWW.PEC.BE
7. Small Conveyor Belts with internal motor
(SBC)
7.1 Applications
Type FR-40-120
Type FR-30-60
Small belt conveyors with internal drive are easy controlled by PLC with a plug or cable connection. No disturbing motor (internal).Max. width = support profile.Max. height = belt.The use of an aluminium profile makes the integration in existing machineframes e a s y a n d t h e a t t a c h m e n t o f s i d e g u i d a n c e s , c e n s o r s a n d cylinders possible.
Type FR-40-80 Type FR-40-120
Type FR-40-160
31
PEC Products belt conveyor systems WWW.PEC.BE
Type FR-12-20
Type item profi le Profi le 5 20x20 Total height = 12 mm Beltwidth = 17 mm Motor 3V free mounting externally possible over the total length of the profile 20x20 Speed 1,5 m/min Conveyorload max : 5N Centre Distance min : ~ 100 mm max : ~ 300 mm 1 set type FR-12-20 12-20 (please indicate L when ordering)
Type FR-20-20
Type item profi le Profi le 5 20x20 Total height = 150 mm Beltwidth = 14 mm Conveyor belt Grey PU 11 Motor 24V = 5 Watt free mounting externally possible over the total length of the profile 20x20 Speed 2-20 m/min Conveyorload max : 5N Centre Distance min : ~ 200 mm max : ~ 1200 mm 1 set type FR-20-20 20-20 (please indicate L when ordering)
7. Small Conveyor Belts with internal motor
(SBC)
7.2 SBC Types
32
PEC Products belt conveyor systems WWW.PEC.BE
7. Small Conveyor Belts with internal motor
(SBC)
7.2 SBC Types
Type FR-20-40
Type item profile Profile 5 40x20 Beltwidth = 32 mm Conveyor belt Grey PU 11 Motor with planet gear 24V servomotor + servo amplifier Speed Conveyorload ca. 8 m/min 2N ca. 3 m/min 5N Centre Distance min : ~ 300 mm max : ~ 1000 mm FR-20-40 8 m/min 20-40-80
FR-20-40 3 m/min 20-40-30
FR-20-40 2 m/min 20-40-20 (please indicate L when ordering)
Type FR-30-60
Type item profile Profile 6 30x60 Beltwidth = 50 mm Conveyor belt Green 2 E/PG 02 Motor with planet gear 24V = 9 Watt Speed Conveyorload ca. 9 m/min 10N ca. 3 m/min 20N ca. 2 m/min 20N ca. 1 m/min 30N ca. 0.5 m/min 30N Centre Distance min : ~ 300 mm max : ~ 1200 mm FR-30-60 9 m/min 30-60-90
FR-30-60 3 m/min 30-60-30
FR-30-60 2 m/min 30-60-20
FR-30-60 1 m/min 30-60-10
FR-30-60 0.5 m/min 30-60-05
(please indicate L when ordering)
33
PEC Products belt conveyor systems WWW.PEC.BE
7. Small Conveyor Belts with internal motor
(SBC)
7.2 SBC Types
Type FR-30-60-200
Type item profile Profile 6 30x60 Beltwidth = 50 mm Conveyor belt Green 2 E/PG 02 Motor with planet gear 24V = 9 Watt Speed Conveyorload ca. 9 m/min 10N ca. 3 m/min 20N ca. 2 m/min 20N Centre Distance 200 mm FR-30-60 9 m/min 30-60-200-90
FR-30-60 3 m/min 30-60-200-30
FR-30-60 2 m/min 30-60-200-20
Type FR-40-80
Type item profile Profile 5 40x20 Beltwidth = 65 mm Conveyor belt Green 2 E/PG 02 Motor with planet gear 24V = 13 Watt Speed Conveyorload ca. 8 m/min 20N ca. 2.7 m/min 30N ca. 1.8 m/min 30N ca. 0.9 m/min 50N ca. 0.5 m/min 50N Centre Distance min : ~ 350 mm max : ~ 1600 mm
FR-40-80 8 m/min 40-80-80
FR-40-80 2.7 m/min 40-80-27
FR-40-80 1.8 m/min 40-80-18
FR-40-80 0.9 m/min 40-80-09
FR-40-80 0.5 m/min 40-80-05
(please indicate L when ordering)
34
PEC Products belt conveyor systems WWW.PEC.BE
7. Small Conveyor Belts with internal motor
(SBC)
7.2 SBC Types
Type FR-40-120
Type item profile Profile 5 40x20 Beltwidth = 105 mm Conveyor belt Green 2 E/PG 02 Motor with planet gear 24V = 13 Watt Speed Conveyorload ca. 8 m/min 20N ca. 2.7 m/min 30N ca. 1.8 m/min 30N ca. 0.9 m/min 50N ca. 0.5 m/min 50N Centre Distance min : ~ 350 mm max : ~ 1600 mm
FR-40-120 8 m/min 40-120-80
FR-40-120 2.7 m/min 40-120-27 FR-40-120 1.8 m/min 40-120-18 FR-40-120 0.9 m/min 40-120-09 FR-40-120 0.5 m/min 40-120-05
(please indicate L when ordering)
Type FR-40-160
Type item profile Profile 5 40x20 Beltwidth = 145 mm Conveyor belt Green 2 E/PG 02 Motor with planet gear 24V = 36 Watt Speed Conveyorload ca. 8 m/min 20N ca. 2.7 m/min 30N ca. 1.8 m/min 30N ca. 0.9 m/min 50N ca. 0.5 m/min 50N Centre Distance min : ~ 350 mm max : ~ 1600 mm
FR-40-160 8 m/min 40-160-80
FR-40-160 2.7 m/min 40-160-27 FR-40-160 1.8 m/min 40-160-18 FR-40-160 0.9 m/min 40-160-09 FR-40-160 0.5 m/min 40-160-05
(please indicate L when ordering)
35
PEC Products belt conveyor systems WWW.PEC.BE
7. Small Conveyor Belts with internal motor
(SBC)
7.3 Regulation SR 15
Type FR-40-200
Type item profile Profile 5 40x20 Beltwidth = 185 mm Conveyor belt Green 2 E/PG 02 Motor with planet gear 24V = 36 Watt Speed Conveyorload ca. 8 m/min 20N ca. 2.7 m/min 30N ca. 1.8 m/min 30N ca. 0.9 m/min 50N ca. 0.5 m/min 50N Centre Distance min : ~ 350 mm max : ~ 1600 mm
FR-40-200 8 m/min 40-200-80
FR-40-200 2.7 m/min 40-200-27 FR-40-200 1.8 m/min 40-200-18 FR-40-200 0.9 m/min 40-200-09 FR-40-200 0.5 m/min 40-200-05
(please indicate L when ordering)
Regulation SR15
Electronic Speed regulator for BCS : - Type FR-40-200 - Type FR-40-160 - Type FR-40-120 - Type FR-40-80 - Type FR-30-60
The regulator SR10 is suitable for the control of direct current motors with a maximum power input of 2A during a maximum expenditure to tension of 24V. The building method offers a mechanical and electrical enclosure according to IP 52. The used automatic controller principle makes a speed range of 1:20 possible, related to the maximum speed. The speed, during increasing of the load, will be held constantly with an accuracy of +/- 5%. 30-40-10
36
PEC Products belt conveyor systems WWW.PEC.BE
Company : ......................................................................................................
Name : ......................................................................................................
Function : ......................................................................................................
Department : ......................................................................................................
Phone : ......................................... Fax : .........................................
Mobile phone :........................................ E-mail : .........................................
Type of conveyor :
Dimensions :
Distance between axes (L) : ...........................................................mm (c-c) Frame width (W) : ...........................................................mm Standard frame width [mm] : Belt conveyor 40 : o 40 o 80 o 218 o 318 o 418 Belt conveyor 80 : o 80 o 218 o 318 o 418 o 618 Belt conveyor 120 : o 80 o 218 o 318 o 418 o 618 o 1218
Running direction :
o Rotating clockwise (pulling) o Rotating anticlockwise (pushing) o Reverse operation
Side of motor attachment (in the running direction) :
o Right side o Left side Mounting positions : o B01 o B02 o P01 o P02 o W01 o W02 o V01 o V02
Conveyor alignment : o Horizontal If not horizontal : inclination ......° o Upwards oDownwards
Velocity :
Velocity : ............... m/min
8. How to order For a fast quotation please fax a fi lled out copy of this questionnaire to +32 16 39 83 69
L
R
oBCF 40 d oBCF 40 i oBCM 40 oBCF 80 d oBCF 80 ioBCM 80
oBCD 80oBCF 120 d oBCF 120 i oBCM 120oSBC Type FR12-20 oSBC Type FR-20-20
oSBC Type FR-20-40oSBC Type FR-30-60oSBC Type FR-30-60-200 oSBC Type FR-40-80oSBC Type FR-40-120 oSBC Type FR-40-160
oSBC Type FR-40-200 oRegulation SR15
37
PEC Products belt conveyor systems WWW.PEC.BE
8. How to order
< >W-6< >
H<
<
W-6 (outsize)
Slide plate :
o Type A oType B (flat) (with side guidance) Operation conditions :
o Continuous operation Number of shifts : ..................... o Start/stop operation Number of starts in succession........../h Ambient temperature : ...............°C Supply Voltage : ...............
Description of material to be transported :
Individual weight : ......... kg Total weight : ......... x ......... kg Description : (material, surface, shape, temperature, dimensions, etc...) ....................................................................................................................... ....................................................................................................................... ....................................................................................................................... .......................................................................................................................
Requirements of belt : Standard belts : o Standard Conveyor Belt (SCB) o High duty and processing Conveyor Belt (HCB) o Food Conveyor and processing Belt (FCB) o Modular Conveyor Belt (MCB) o Special Other requests : ....................................................................................................................... .......................................................................................................................
System layout (Sketch) : Include Support leg sets
oLeg connection set 40 (11-1-003) p 28
oLeg connection set 80 (11-1-004) p 28 oLeg connection set Km (11-1-005) p 28
oLeg connection set St (11-1-006) p 28
oLeg connection set Al (11-1-007) p 28
oStand-alone Leg Frame Set (11-1-008) p 28
oLeg Frame Set 40 (11-1-009) p 28
oLeg Frame Set 80 (11-1-010) p 28
oL-Based Foot Set (11-1-015) p 28
oL-Based Fixed Foot Set (11-1-016) p 28
oKnuckle Foot D40 Set (11-1-017) p 28
oKnuckle Foot D80 Set (11-1-018) p 28
38
PEC Products belt conveyor systems WWW.PEC.BE
9. Alphabetic register
A Applications 5
B BCD 80 - Belt conveyor 80 with Drum Motor 17 BCF 40 d - Belt Conveyor 40 with direct Front drive 9 BCF 40 i - Belt Conveyor 40 with indirect Front drive 8BCF 80 d - Belt Conveyor 80 with direct Front drive 15 BCF 80 i - Belt Conveyor 80 with indirect Front drive 14BCF 120 d - Belt Conveyor 120 with direct Front drive 21 BCF 120 i - Belt Conveyor 120 with indirect Front drive 20 BCM 40 - Belt Conveyor 40 with Middle drive 10 BCM 80 - Belt Conveyor 80 with Middle drive 16BCM 120 - Belt Conveyor 120 with Middle drive 22
C Conveyor 40 technical data 7 Conveyor 80 technical data 13Conveyor 120 technical data 19 Conveyor Parts 28
G General information 3
I Index 4Introduction 3
M
Modular Belt Conveyor 80 with direct Front drive (MBCF 80 d) 27Modular Belt Conveyor 80 with indirect Front drive (MBCF 80 i) 26Modular conveyor 80, technical data 24
39
PEC Products belt conveyor systems WWW.PEC.BE
Q Questionnaire conveyor belts 36
R Regulation SR15 35
S Saw cut 31 SBC, type FR-12-20 31SBC, type FR-20-20 32SBC, type FR-20-40 32SBC, type FR-30-60 32SBC, type FR-30-60-200 33SBC, type FR-40-80 33SBC, type FR-40-120 34SBC, type FR-40-160 34SBC, type FR-40-200 35Small Conveyor Belts (SBC) applications 30Small Conveyor Belts (SBC) types 31
9. Alphabetic register
40
PEC Products belt conveyor systems WWW.PEC.BE
................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ...................................................................................................................................................
Notes : ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ...................................................................................................................................................
Notes :
41
PEC Products belt conveyor systems WWW.PEC.BE
................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ...................................................................................................................................................
Notes :
42
PEC Products belt conveyor systems WWW.PEC.BE
................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ...................................................................................................................................................
Notes :
43
PEC Products belt conveyor systems WWW.PEC.BE
................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ................................................................................................................................................... ...................................................................................................................................................
Notes :
PEC Products
Technologielaan 12 B-3001 LEUVEN phone: +32 16 398339 fax: +32 16 [email protected]
WWW.PEC.BE