Behringer Xenyx 1002USB vesa mount - PrusaPrinters · 2020. 7. 23. · Vesa (10x10) mount/stand for...
Transcript of Behringer Xenyx 1002USB vesa mount - PrusaPrinters · 2020. 7. 23. · Vesa (10x10) mount/stand for...
7.56 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
1
111.00 g
d
CrealityEnder-3
Print Files (.gcode) DOWNLOAD ALL FILES
Summary
Vesa (10x10) mount/stand for Xenyx USB audio mixer.
Modelled in Onshape. Curvature of bottom part made from sketch.
Link to onshape model attached.
Gadgets > Audio
xenyx vesa stand mount behringer
Lay flat, print without supports, ~15% infill.
I've printed it with 0.2mm layer and 0.4mm nozzle.
wociscz
Behringer Xenyx1002USB vesamount
VIEW IN BROWSER
updated 23. 7. 2020 | published 23. 7. 2020
4.4 MB
7.56 hrs f 0.20 mm k 0.40 mm h PLA 111.40 g
updated 23. 7. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
8.8 MBupdated 23. 7. 2020
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
xenyx_vesa_mount.gcode
xenyx_vesa_mount.stl