B.E.G. - luxomat.comluxomat.com/en/pdf/en/ba/MAN_7537_PD11-KNX_GB.pdf · B.E.G.LUXOMAT®...
1
Installation and Operating Instruction for B.E.G. - Occupancy detectors PD11-KNX-FLAT-FC 1. Installation of the LUXOMAT ® PD11-KNX-FLAT-FC B.E.G. LUXOMAT ® PD11-KNX-FLAT The detector has been designed and developed specifically for installation in suspended ceilings. A circular opening of diameter 44mm must be produced in the ceiling. Having connected up the cables in accordance with regula- tions, the detector is inserted into the opening as shown in the drawing opposite and fixed into position with the assistance of the spring clips. 2. Detection areas EN 1 Walking across 2 Walking towards Seated Programming button 44 mm 9 m 6 m 3 m 9 m 360° 2 1 4. Putting into operation / Settings In connection with the application program BEG_Occupancydetector_92893_V5.0 there are 4 different modes available. Product data bank to be imported in the ETS data base is included in the delivery or can be downloaded from the B.E.G. homepage. Attention: Please do not locate the detector near a heating or air condition source! Please refer to the application description for details of appli- cation programming and the communication objects! 7. Dimensions 8. PD11-KNX-FLAT – Connections Type FC PD11-KNX-FLAT 92893 5. Article / Part-Nr. / Accessory 6. Technical data PD11-KNX-FLAT Sensor and power supply in one case Power supply: 24VDC from KNX-BUS Current absorption: 10 mA Ambient temperature: -25°C – +55°C Degree of protection/class: IP20 / II Settings: by ETS-system (Product data bank to be imported in the ETS data base is included in the delivery or can be downloaded fom the B.E.G. homepage.) Area of coverage: circular 360° Range of coverage: max. Ø 9 m (walking across) Recommended height for mounting: 2 - 3 m Light measure: mixed light, daylight + artificial light Dimensions H x Ø [mm]: 43,3 x 52 Visible portion when built into ceiling: 0,85 mm Declaration of Conformity: The product complies with the low voltage recommendation 2006/95/EC and the EMV recommendation 2004/108/EC. 52 42,5 0,85 43,3 + – 24 VDC BUS MAN 7537 – 090714 – 3 3. Position Programming button position 2.50 m
Transcript of B.E.G. - luxomat.comluxomat.com/en/pdf/en/ba/MAN_7537_PD11-KNX_GB.pdf · B.E.G.LUXOMAT®...
Installation and Operating Instruction for B.E.G. - Occupancy detectors PD11-KNX-FLAT-FC
1. Installation of the LUXOMAT® PD11-KNX-FLAT-FC
B.E.G. LUXOMAT® PD11-KNX-FLAT
The detector has been designed and developed specifically for installation in suspended ceilings. A circular opening of diameter 44mm must be produced in the ceiling. Having connected up the cables in accor dance with regula-tions, the detector is inserted into the opening as shown in the drawing opposite and fixed into position with the assistance of the spring clips.
2. Detection areas
EN
1 quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
Walking across
2quer zum Melder gehen
frontal zum Melder gehen
UnterkriechschutzWalking towardsquer zum Melder gehen
frontal zum Melder gehen
UnterkriechschutzSeatedProgramming button
44mm
9 m6 m
3 m
9 m360°
2,50 m
2
1
4. Putting into operation / Settings
In connection with the application program BEG_Occupancydetector_92893_V5.0 there are 4 different modes available.
Product data bank to be imported in the ETS data base is included in the delivery or can be downloaded from the B.E.G. homepage.
Attention: Please do not locate the detector near a heating or air condition source!
Please refer to the application description for details of appli-cation programming and the communication objects!
7. Dimensions 8. PD11-KNX-FLAT – Connections
Type FC
PD11-KNX-FLAT 92893
5. Article / Part-Nr. / Accessory 6. Technical data PD11-KNX-FLAT
Sensor and power supply in one casePower supply: 24VDC from KNX-BUS Current absorption: 10mAAmbient temperature: - 25°C – +55°CDegree of protection/class: IP20 / IISettings: by ETS-system(Product data bank to be imported in the ETS data base is included in the delivery or can be downloaded fom the B.E.G. homepage.)Area of coverage: circular 360°Range of coverage: max. Ø 9m (walking across)Recommended height for mounting: 2 - 3mLight measure: mixed light, daylight + artificial lightDimensions H x Ø [mm]: 43,3 x 52Visible portion when built into ceiling: 0,85mm
Declaration of Conformity: The product complies with the low voltage recommendation 2006/95/EC and the EMV recommendation 2004/108/EC.
52
42,5
0,85
43,3
+–
24VDCBUS
MA
N 7
537
– 09
0714
– 3
3. Position Programming button position
2.50 m
![Energy Efficiency with KNX - KNX Association [Official website]](https://static.fdocuments.in/doc/165x107/613d232b736caf36b759c1df/energy-efficiency-with-knx-knx-association-official-website.jpg)
