Before the first use Operating the washing machine ...€¦ · For switching the washing machine on...
Transcript of Before the first use Operating the washing machine ...€¦ · For switching the washing machine on...
WC
R 8
70en
- A
U, N
ZM
.-N
r. 11
311
620
/00
Before the first use Operating the washing machine Preparing the laundry Selecting a programme Starting the programme Extras
OP
ER
ATIN
G T
HE
WA
SH
ING
MA
CH
INE
PR
EPA
RIN
G T
HE
LA
UN
DR
Y/S
ELE
CTI
NG
A P
RO
GR
AM
ME
AD
DIN
G L
AU
ND
RY
3 5
1 2
4
ɔ Damage resulting from incorrect installation and connection. Installing and connecting the washing machine incorrectly will cause serious damage. Please read the separate operating instructions supplied with the appliance.
ɔ Damage resulting from failure to remove the transit bars. Failure to remove the transit bars can result in damage to the washing machine and to adjacent cabinetry or appliances. Please read the separate operating instructions supplied with the appliance.
Switching on the washing machine ĺ Press the button.
The welcome screen will light up.The display will guide you through the initial commissioning process, which is divided into 6 steps.For further information, please refer to the separate operating instructions.
Touch display and sensor controlsThe and Start/Stop sensors and the sensors in the display react to fingertip contact.
The Touch display can be scratched by pointed or sharp objects, e.g. pens.Only touch the display with your fingertips.
1 sensor Takes you back a level in a menu.
2 Touch display3 Start/Stop sensor
Touching the Start/Stop sensor starts the selected programme or cancels a programme that has already been started. The sensor flashes slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.
4 Optical interface For service technicians.
5 button For switching the washing machine on and off. To save energy, the washing machine will switch off automatically. This occurs 15 minutes after the end of the programme/Anti-crease phase, or after being switched on if no further selection is made.
Main menuAfter switching on the washing machine, the main menu will appear in the display.You access all the important sub-menus from the main menu.Touch the sensor at any time to return to the main menu. Values set previously are not saved.
ProgrammesFor selecting the wash programme.
Favourite programmesYou can save up to 12 of your own customised wash programmes.
MobileControlWith MobileControl you can operate your washing machine remotely with the Miele@mobile App.
Washing assistantThe Washing assistant guides you step by step so that you can select the optimum wash programme for your laundry.
MaintenanceMaintenance options for the TwinDos system and the Clean machine programme are located in the Maintenance menu (see "Cleaning and care").
SettingsYou can alter the washing machine's electronics to suit changing requirements in the Settings menu.
Operating the touch display
ScrollingYou can scroll to the right or the left by swiping your finger across the screen.The orange bar under the pictures shows that there are further options to choose from.
SelectingTouch an option in the menu to select it. If there are multiple options, the selected option will be highlighted in orange.
Pull-down menuTouch the top edge of the screen in the middle and drag down with your finger.
1. Preparing the laundry ĺ Empty all pockets.
ɔ Foreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and components in the machine.
ĺ Sort the laundry by colour and by care label. Most garments have a textile care label in the collar or side seam.
ĺ Pre-treat stains and badly soiled areas (see the booklet "Miele's guide to laundry care").
2. Selecting a programme ĺ Touch the Programme sensor.
ĺ Scroll to the right of the display until the programme you want appears.
ĺ Touch the sensor for that programme.The display will change to show the Overview menu.There are 3 different ways of selecting a programme.1. Favourites2. Washing assistant3. MobileControl
11:02
2:39
2:59
1:59
1:09h
h h
h
Cottons
Cottons Delicates
Minimum iron
Programmes
Help
11:02
40 °C 16002:39Cottons
h
Overview
Temperature Spin speed
TwinDos Extrasnot selectedColour
Timer Save
rpm
1 Detergent dispenser drawer2 Control panel3 Access to drain filter, drain pump
and emergency release4 Door5 Access panel for TwinDos
containers
3. Selecting programme settings
Selecting the temperature ĺ Touch the Temperature sensor and select the temperature you want.
Selecting a spin speed ĺ Touch the Spin speed sensor and select the spin speed you want.
Activating TwinDosTwinDos dispensing is automatically activated for all programmes in which dispensing is possible.1. Switch TwinDos on or off ĺ Touch the TwinDos sensor and select Off or On.
2. Select the detergentWhen using Miele's 2-phase system you must set the colour of the laundry.If you are using a different type of detergent, this must be selected.3. Select the degree of soiling. ĺ Select Light, Normal or Heavy and confirm your selection with the OK sensor.
Selecting Extras ĺ Touch the Extras sensor. ĺ Select one or more Extras and confirm your selection with the OK sensor.
Activating CapDosing ĺ Touch the CapDosing sensor. ĺ Select the type of capsule you want.
Stains ĺ Touch the Stains sensor. ĺ Select the type of stains in your load from the list and confirm your selection with the OK sensor.
TimerYou can use the Timer to set the finish time or the start time for a wash programme.
4. Loading the washing machine
Opening the door ĺ Take hold of the
door and pull it open.
ĺ Unfold the laundry and load loosely in the drum.
The maximum load for the programme selected will appear in the pull-down menu.
Closing the door ĺ Make sure that
no items are caught between the door and the seal.
ĺ Shut the door with a gentle swing.
5. Adding detergentThere are several options for adding detergent.
TwinDosTwinDos dispensing is automatically activated for all programmes in which dispensing is possible. ĺ For further information see "3. Selecting programme settings"
Adding detergentAny detergent suitable for automatic front loading washing machines can be used with this appliance. Add detergent in accordance with the value in the pull-down dosage display.
Ensure that TwinDos dispensing is deactivated.
ĺ Pull out the detergent drawer and add detergent to the compartments.
Detergent for the pre-wash Detergent for the main wash,
including Soak if selected / Fabric softener, liquid starch or
capsules
CapDosingIf you selected CapDosing when setting the programme, detergent will be dispensed via the capsule for this wash programme.
Using detergent tablets or podsAlways put detergent tablets or pods directly in the drum with the laundry. They cannot be added via the detergent dispenser drawer.
6. Starting the programme ĺ Touch the flashing Start/Stop sensor.
The door will lock and the programme will start.The programme status will appear in the display.
Adding laundry during a programme sequenceLaundry can be added or removed at any time as long as the Add laundry sensor is lit up. ĺ Touch the Add laundry sensor.
The following appears in the display: Please waitThe programme will stopand the door will unlock. ĺ The following appears in the display: Add laundry Door unlocked
ĺ Open the door and add or remove laundry.
ĺ Close the door. ĺ Touch the Start/Stop sensor.
The wash programme will continue.
7. At the end of the programmeThe door is locked in the Anti-crease phase. Finish/Anti-crease and Unlock with "Start/Stop" appear in the display. ĺ Touch the Start/Stop sensor. The door will be unlocked.
Note: The door unlocks automatically at the end of the Anti-crease phase.
ĺ Reach under the door grip and pull the door open.
ĺ Remove the laundry.
Items left in the drum could shrink or discolour other items in the next wash. Remove all items from the drum.
ĺ Check the folds in the door seal for any small articles, e.g. buttons, which might be lodged there.
Note: For safety reasons close the door. ĺ Close the door and remove any used capsules from the detergent dispenser drawer.
Tip: Leave the detergent dispenser drawer slightly open to allow it to dry.
ExtrasYou can use the Extras sensor to augment the wash programmes.
QuickThe programme duration is reduced. Mechanical action and energy usage are increased.EcoThe Eco Extra helps to save energy. The wash temperature is reduced and the wash duration is increased in return. The wash programme continues to provide excellent results.Water plusThe water level in the wash and rinse stages is increased. You can select by how much the water level is increased (see "Settings - Water plus level").Extra rinseAn additional rinse cycle can be carried out to give a better rinse result.SingleWashFor efficiently washing a very small load (< 1 kg) in a normal wash programme. The wash duration is reduced.Please note the following advice: – Use liquid detergent – Reduce the dosage to a maximum of 50% of the amount quoted for a ½ load
Pre-ironingIn order to reduce creasing, the laundry undergoes a smoothing process at the end of the programme. Reducing the maximum load by 50% will give a better result. Follow the instructions in the display. Small loads give a better result.The garments must be suitable for drying in a tumble dryer and suitable for ironing .Pre-washFor laundry with large amounts of dirt, e.g. dust and sand.
SoakFor heavily soiled and stained items with protein stains.A duration of between 30 minutes and 6 hours can be chosen for the soak process. See "Settings" for more information.The factory default setting is 30 minutes.IntensiveFor hard-wearing laundry that is very heavily soiled. Cleaning efficiency is increased through more intense mechanical action and the application of more heat energy.AllergoWashThis option should be used where high standards of hygiene are required. More energy is used to lengthen temperature holding times and more water is used to increase rinsing efficiency. The items must be suitable for drying in a tumble dryer and suitable for ironing .Extra gentleDrum rotation and wash duration are reduced. Lightly soiled fabrics are washed more gently.Extra quietThis option reduces noise levels during the wash programme. Use this if you want to wash during quiet periods (for instance, when children are sleeping). The final spin is automatically reduced to (Rinse hold). The programme duration is increased.Rinse holdThe laundry is not spun after the final rinse and remains in the rinse water. This helps prevent creasing if the laundry is not going to be removed from the drum immediately after the end of the programme.
en - AU, NZ M.-Nr. 11 311 620
Cleaning and careProgramme chart Detergent Problem solving guide
PR
OG
RA
MM
E C
HA
RT
CLE
AN
ING
AN
D C
AR
E
PR
OB
LEM
SO
LVIN
G G
UID
E
Quick Start GuideWashing machine
These short instructions are not a substitute for the operating instructions supplied with the appliance. Please read the operating instructions supplied with your washing machine before using it for the first time and take note of the Warning and Safety instructions, as well as the full descriptions on how to use your appliance.
Cleaning the drum (Hygiene info)Washing at low temperatures and/or using liquid detergents can cause bacteria and odours to build up in the washing machine. Use the Clean machine programme to clean the machine. Note the message in the display: Hygiene info: Select "Maintenance" and start the "Clean machine" programme
Cleaning the TwinDos system
ɔ Damage resulting from dried washing detergent. If the system has not been used for a long time (more than two months), the detergent in the hoses can become viscous or dry out. The hoses can become blocked and would then need to be cleaned by a service technician. Clean the TwinDos system.
To clean the system, a refillable TwinDos container is required (sold separately), available online at shop.miele.com. P
rogr
amm
eLo
ad (i
n kg
)Te
mpe
ratu
reIte
ms
Extra
s
Co
tto
ns
Co
tto
ns
9.0
Col
d to
90°
CC
otto
ns, l
inen
s or
cot
ton
mix
fabr
ics,
e.g
. tab
le li
nen,
tow
ellin
g,
unde
rwea
r, T-
shirt
s et
c.
Min
imum
iro
n4.
0C
old
to 6
0°C
Syn
thet
ic, m
ixed
fibr
e an
d ea
sy c
are
cotto
n.
D
elic
ates
3.0
Col
d to
60°
CD
elic
ate
garm
ents
mad
e fro
m s
ynth
etic
fibr
e, m
ixed
fibr
e, ra
yon
and
visc
ose.
Q
uick
Po
wer
Was
h4.
040
°C –
60°
CM
oder
atel
y so
iled
garm
ents
whi
ch a
re a
lso
suita
ble
for w
ashi
ng in
the
Cot
tons
pro
gram
me.
Aut
om
atic
plu
s6.
0C
old
to 4
0°C
Mix
ed lo
ads
of g
arm
ents
sor
ted
acco
rdin
g to
col
our w
hich
are
sui
tabl
e fo
r the
Cot
tons
and
Min
imum
iron
pro
gram
mes
.
Wo
olle
ns
2.0
Col
d to
40°
CM
achi
ne-w
asha
ble
or h
and-
was
habl
e w
ool o
r woo
l ble
nd fa
bric
. If t
he
care
labe
l doe
s no
t spe
cify
a te
mpe
ratu
re, w
ash
usin
g th
e co
ld s
ettin
g.
Silk
s
1.0
Col
d to
30°
CS
ilks
and
othe
r han
d-w
asha
ble
fabr
ics
with
no
woo
l con
tent
, e.g
. sat
in,
lace
and
silk
.
Exp
ress
20
3.5
Col
d to
40°
CC
otto
n ga
rmen
ts th
at h
ave
hard
ly b
een
wor
n or
are
onl
y ve
ry li
ghtly
so
iled.
Shi
rts
1.0
/ 2.0
Col
d to
60°
CS
hirt
s an
d bl
ouse
s m
ade
of c
otto
n an
d m
ixed
fibr
e.If
the
pres
et P
re-ir
onin
g op
tion
is s
witc
hed
off,
the
max
imum
load
ca
paci
ty is
incr
ease
d to
2.0
kg.
Den
im3.
0C
old
to 6
0°C
Item
s m
ade
of d
enim
.
Dar
k g
arm
ents
3.0
Col
d to
60°
CB
lack
and
dar
k ite
ms
mad
e of
cot
ton
or m
ixed
fibr
es.
S
po
rtsw
ear
3.0
Col
d to
60°
CS
port
swea
r suc
h as
jers
ey s
hirt
s an
d le
ggin
gs, a
nd m
icro
fibre
and
fle
ece
garm
ents
.
Tr
aine
rs2
pairs
Col
d to
40°
CS
port
sho
es o
nly
(not
leat
her s
hoes
).
Out
erw
ear
2.5
Col
d to
40°
CPe
rform
ance
out
erw
ear (
e.g.
jack
ets
and
trous
ers)
mad
e fro
m
mem
bran
e fa
bric
suc
h as
Gor
e-Te
x®, S
YM
PATE
X®, W
IND
STO
PP
ER®
et
c.
Pro
ofin
g2.
540
°CTr
eatin
g m
icro
fibre
fabr
ic, s
kiw
ear a
nd ta
ble
linen
mad
e fro
m m
ainl
y sy
nthe
tic fi
bres
to p
rovi
de a
wat
er a
nd d
irt re
sist
ant f
inis
h.
Do
wn
item
s2.
0C
old
to 6
0°C
Jack
ets,
sle
epin
g ba
gs, p
illow
s an
d ot
her d
own-
fille
d ite
ms.
Do
wn
duv
ets
2.5
Col
d to
60°
CQ
uilts
, duv
ets
and
pillo
ws
with
feat
her o
r dow
n fil
ling.
Pill
ow
s2.
0C
old
to 6
0°C
Syn
thet
ic fi
lled
was
habl
e pi
llow
s.
C
ott
ons
hyg
iene
9.0
60°C
to 9
0°C
Cot
ton
or li
nen
fabr
ics
with
dire
ct s
kin
cont
act o
r for
whi
ch s
peci
al
hygi
ene
requ
irem
ents
app
ly.
C
urta
ins
2.0
Col
d to
40°
CC
urta
ins,
incl
udin
g ne
t cur
tain
s, s
peci
fied
as m
achi
ne-w
asha
ble
by th
e m
anuf
actu
rer.
Fi
rst
was
h2.
0C
old
to 4
0°C
New
item
s m
ade
of c
otto
n, to
wel
ling
and
poly
este
r fab
ric.
S
epar
ate
rins
e8.
0–
For r
insi
ng it
ems
was
hed
by h
and.
Sta
rch
8.0
–S
tarc
hing
tabl
e cl
oths
, ser
viet
tes
and
wor
kwea
r.
Dra
in/S
pin
8.0
–D
rain
onl
y: S
elec
t 0 r
pm fo
r the
spi
n sp
eed.
Cle
an m
achi
neN
o lo
ad85
°CW
ith fr
eque
nt w
ashi
ng a
t low
tem
pera
ture
s th
ere
is a
dan
ger o
f a
build
-up
of b
acte
ria in
the
was
hing
mac
hine
. C
lean
ing
the
was
hing
mac
hine
will
sign
ifica
ntly
redu
ce b
acte
ria, m
ould
, an
d bi
ofilm
, and
pre
vent
the
build
-up
of u
nple
asan
t odo
urs.
=
Qui
ck;
= E
co;
= W
ater
plu
s;
= E
xtra
rins
e;
= S
ingl
eWas
h;
= P
re-ir
onin
g;
= P
re-w
ash;
=
Soa
k;
= In
tens
ive;
=
Alle
rgoW
ash;
= E
xtra
gen
tle;
= E
xtra
qui
et;
= R
inse
hol
d
Miele recommended detergents
Miele Miele capsules
Programmes UltraPhase 1 and 2
Cottons –
Cottons –
Minimum iron –
Delicates –
QuickPowerWash – – –
Automatic plus –
Woollens – – –
Silks – – –
Express 20 – – –
Shirts –
Denim – –
Dark garments – –
Sportswear – – –
Trainers – –
Outerwear – – –
Down items – – –
Down duvets – – –
Pillows – – –
Cottons hygiene –
Curtains – –
First wash – –
Separate rinse – – –
Recommended Specialist detergents (e.g. WoolCare)
– Not recommended Fabric care (e.g. fabric softener)
Additive (e.g. booster)
Cleaning the detergent dispenser drawer
Washing at low temperatures and the use of liquid detergent can lead to a build-up of mould and bacteria in the detergent dispenser drawer.
ĺ For hygiene reasons, clean the entire drawer at regular intervals even if you are using the TwinDos system exclusively.
ĺ Pull out the detergent dispenser drawer until a resistance is felt.
ĺ Press down the release button and, at the same time, pull the drawer right out of the machine.
ĺ Clean the detergent drawer with warm water.
Cleaning the siphon tube and the fabric softener channel
ĺ Pull the siphon out of the compartment and clean it under warm running water.
ĺ Clean the siphon tube in the same way. ĺ Refit the siphon.
ĺ Clean the fabric softener channel using a brush and warm water.
ɔ Liquid starch can cause the siphon to become clogged. Make sure that you clean the siphon and siphon tube particularly thoroughly after using liquid starch a few times.
Cleaning the detergent dispenser drawer housing
ĺ Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent dispenser drawer housing.
Some of the messages in the display are more than one line long. Touch the or sensor to read them in full.Message Possible cause and remedyThe display remains dark and the Start/Stop sensor indicator light does not come on.
There is no power to the machine. ĺ Check whether the mains plug is plugged in and switched on.
ĺ Check whether the circuit breaker has tripped.The washing machine has switched off automatically to save energy. ĺ Switch it back on with the button.
Door will not lock. Call Miele.
The door is not closed properly. The door lock could not engage. ĺ Close the door again. ĺ Start the programme again. If the fault message appears again, contact Miele.
Water drainage fault. Clean the drain filter and the pump. Check the drain hose.
The water outlet is blocked or restricted. The drain hose has been fixed too high. ĺ Clean the drain filter and the drain pump. ĺ Check whether the maximum delivery head of 1 m has been exceeded.
Water intake fault. Turn on the tap.
The water inlet is blocked or restricted. ĺ Check whether the tap is turned on properly. ĺ Check whether the inlet hose is kinked. ĺ Check whether there is sufficient water pressure.
The filter in the water inlet is blocked. ĺ Clean the filter (see the operating instructions).
Waterproof system activated. Turn off the tap. Call Miele.
The water protection system has reacted. ĺ Turn off the tap. ĺ Call Miele.
Fault F If restart fails, call Miele.
There is a fault. ĺ Disconnect the washing machine from the mains electricity supply, either by switching it off at the wall socket and withdrawing the plug, or by disconnecting it at the circuit breaker.
ĺ Wait at least 2 minutes before reconnecting the washing machine to the mains electricity supply.
ĺ Then switch the washing machine on again. ĺ Restart the programme. If the fault message appears again, contact Miele.
The door lock is jammed. Call Miele.
The door lock is jammed. ĺ Call Miele.
Message Possible cause and remedy Check detergent Excessive foam has built up during washing.
ĺ Check the amount of detergent dispensed. ĺ With automatic detergent dispensing, check the dosage amount set.
ĺ Observe the instructions on the detergent packaging and the degree of soiling of the laundry.
ĺ If necessary, reduce the dosage amount by increments of 10%.
Hygiene info: Select "Maintenance" and start the "Clean machine" programme.
A programme using a temperature above 60°C has not been run for a long time. ĺ In order to prevent bacteria and unpleasant odours building up in the machine, run the Clean machine programme using Miele IntenseClean or powder detergent.
Align the washing machine. Laundry not properly spun.
The Pre-ironing Extra which runs at the end of the programme could not be carried out properly. ĺ Check whether the washing machine is aligned correctly as described in "Installation and connection – Levelling the machine".
ĺ Check whether the maximum delivery head of 1 m has been exceeded.
If the fault message appears again, contact Miele. The washing machine can still be used, however without the Pre-ironing Extra.
Only a few more washes possible before a new cartridge is needed for compartment .
The detergent in the cartridge is running low. There are between 4 and 8 wash cycles remaining. ĺ Order a new cartridge.
Use "TwinDos" or carry out "TwinDos" Maintenance in the "Maintenance" menu. See the operating instruction manual for more information.
TwinDos or automatic dispensing via compartment and/or has not been used for a long time. ĺ Use TwinDos for one of your next loads. ĺ Carry out the TwinDos maintenance programme as described in "Cleaning and care - TwinDos maintenance".
"TwinDos" Maintenance for compartment must be started in the "Maintenance" menu. See the operating instruction manual for more information.
TwinDos or automatic dispensing via compartment and/or has not been used for a long time. It is possible that detergent has dried inside the hoses. ĺ Carry out the TwinDos maintenance programme immediately as described in "Cleaning and care - TwinDos maintenance".
The messages will appear at the end of the programme and when the washing machine is switched on and need to be confirmed with the OK sensor.