Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are...

28
TALL TWIN OVER TWIN STAIRWAY BUNK BED Bedz King BK161 Thank you for purchasing your Furniture from Bedz King. Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected] page 1 of 13 (JULY 2016)

Transcript of Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are...

Page 1: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

TALL TWIN OVER TWIN STAIRWAY BUNK BED

Bedz King BK161

Thank you for purchasing your Furniture from Bedz King.

Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected]

page 1 of 13 (JULY 2016)

Page 2: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED

SAFETY WARNINGS AND GENERAL NOTES

Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.

Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.

The top surfaces of the mattress must be at least 5" below the upper edge of the guardrails.

Do not allow children under 6 years of age to use the upper bunk.

Prohibit more than one person on the upper bunk.

Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.

Do not allow horseplay on or under the bed. Always prohibit jumping on the bed.

Always use the ladder for entering and leaving the upper bunk.

Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.

Use of a night-light may provide added safety for a child using the upper bunk.

If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.

Always use guardrails on both long sides of the upper bunk.

The use of a water or sleep floatation mattress is prohibited.

Keep these instructions for future reference.

We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.

Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.

page 2 of 13 (July/2018)

Page 3: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

WARNING Pursuant to the Consumer Product Safety Improvement Act (CPSIA) Sec. 102 the manufacturer certifies compliance with the Consumer

Product Safety Commission (CPSC) regulations listed below.

**** Product Information **** **** Safety Testing Information ****

Testing performed at one or more of the following independent testing locations: BUNK BED -BK 161 (Stairway) / BK 161EL (End Ladder)

Diversified Testing Laboratories Inc Armstrong Forensic Laboratory

Date of Manufacture: 336 West Front Street 330 Loch'n Green Trail P.O. Box 4004 Arlington, TX 76012 Burlington, NC 27215

Manufactured by: Custodian of Test Records: Bedz King LLC Manager of Compliance and Testing

Made in Brazil

Date Testing Location Regulation 816 111th Street Bedz King LLC January - April 2014 Armstrong 15 U.S.C. § 1278aArlington, TX 76011 816 111th Street November 2014 Armstrong 16 CFR 1303

Arlington, TX 76011 March 2014 Diversified ASTM F 1427-13 Children's Product Certificates avaliable at www.bedzking.com/certificates March 2014 Diversified 16 CFR 1213 and 16 CFR 1513

50

37

To help prevent serious or fatal injuries from entrapment or falls: - Use guardrails on both sides of upper bunk - Never allow a child under 6 years on upper bunk. - Prohibit horseplay on or under bed (s). - Use only ma�ress which is 74" - 75" long and 37 1/2" - 38 1/2" - Prohibit more than one person on upper bunk. wide on upper bunk. - Use ladder for entering and leaving upper bunk. - Use only ma�ress which is 74" - 75" long and 37 1/2" - 38 1/2" - STRANGULATION HAZARD - Never attach or hang wide on lower bunk. items to any part of the bunk bed that are not designed - Ensure thickness of ma�ress and founda�on combined does not for use with the bed, for example, but not limited to exceed 9" and ma�ress is at least 5" below upper edge of guardrails. hooks, belts and jump ropes.

DO NOT REMOVE THIS LABEL

48 2x

24x

48 2x

page 3 of 13 (July/2018)

Page 4: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

SCREWS ARE SHOWN IN ACTUAL SIZE Qty. Extra

A5 12 3,5x16

A10 88 3,5x30

B5 24 +2 1/4"

B7 24 +2 1/4"x110

B16 16 +2 7,0x110

C5 4 15x90

C6 55 +2 10x50

D13 2

G4 space block 2

G8 1

WARNING - CHOKING HAZARD To be Assembled by Adults only!

Small parts can be a choking hazard for children

page 4 of 13 (July/2018)

Page 5: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

02

01C6

30

B5

G8+B16

G8+B7

G8

08

09

B5

B16+G8

B7+G8

G8

B16

2x

B5

26

C6

C6C6

C6

C6C6

2x

30

C6

C6C6

C6

C6C6

C6

C6

34

C6

C6

C6C6

C6C6

C6 - 50x

B7 - 04x B16 - 04x B5 - 04xG8 - 01x

page 5 of 13 (July/2018)

WARNINGDO NOT REMOVE THIS LABEL

To help prevent serious or fatal injuries

from entrapment or falls:

Use only mattress which is 74!-75!long and

37-38 !wide on upper bunk.

1/2!1/2

Ensure thickness of mattress and foundation

combined does not exceed 9!and mattress is

at least 5!below upper edge of guardrails.

Never allow a child under 6 years on upper bunk. Use guardrails on both sides of upper bunk.

Prohibit horseplay on or under bed(s).

Prohibit more than one person on upper bunk.

Use ladder for entering and leaving upper bunk.

STRANGULATION HAZARD - Never attach or hang

items to any part of the bunk bed that are not designed

for use with the bed,for example, but not limited to

hooks, belts, and jump ropes.

Bedz King LLC.

816 111th Street

Arlington. Texas 76011

USAItem#:

PO

Month/year of Mfg.:

33

Page 6: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

03 B5

B5 30

B5

12 B5

B5 B5

B7+G8 B7+G8

30

12 G8+B7

G8+B7 B5 B7

G8+B7 G8+B7 G8 - 01x

G8 B7

G8 B7 - 08x

B5 - 08x

04 C5 C5

C5

C5

C5

C5 - 04x

page 6 of 13 (July/2018)

Page 7: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

05 A10

A10 A10

A10 20 A10

A10 A10

A10 20 A10

A10 - 08x

06

45 48 G4

A10 48

45

A10 A10

A10

A10 A10 G4 48

A10

A10 45

(12x) A10

A10 A10

G4 A10

A10 A10

48

A10 - 28x G4 - 02x

page 7 of 13 (July/2018)

Page 8: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

G8

B16

08

07

B16+G8

B16+G8

B16+G8

15

15

G8

B5

G8+B16

G8+B16

G8+B16

G8+B7

G8+B7

G8

B7

G8+B7

B7

12

B5

B5

15

15

12

B7+G8

B7+G8B5B5

B5 - 08x B16 - 08x

B7 - 08xG8 - 01x

B5 - 04x B16 - 04xB7 - 04xG8 - 01x

WARNINGDO NOT REMOVE THIS LABEL

To help prevent serious or fatal injuries

from entrapment or falls:

Use only mattress which is 74!-75!long and

37-38 !wide on upper bunk.

1/2!1/2

Ensure thickness of mattress and foundation

combined does not exceed 9!and mattress is

at least 5!below upper edge of guardrails.

Never allow a child under 6 years on upper bunk. Use guardrails on both sides of upper bunk.

Prohibit horseplay on or under bed(s).

Prohibit more than one person on upper bunk.

Use ladder for entering and leaving upper bunk.

STRANGULATION HAZARD - Never attach or hang

items to any part of the bunk bed that are not designed

for use with the bed,for example, but not limited to

hooks, belts, and jump ropes.

Bedz King LLC.

816 111th Street

Arlington. Texas 76011

USAItem#: PO

Month/year of Mfg.:

G8

G8

G8

G8

G8

G8

G8G8

B5

B5

page 8 of 13 (July/2018)

Page 9: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

09 C6

C6

C6

37

A5

A5 D13

A5

A5

A5

A5 - 12x C6 - 02x D13 - 02x 37

10 A10 A10

A10 A10

21 A10

A10 18

A10

18 A10

A10

A10

A10 - 10x

page 9 of 13 (July/2018)

Page 10: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

11

G4 48A10

45

A10 A10

A10 G4A10

A10 45A10

(12x)A10 A10

A10 A10

A1048

45

48 A10

A10 A10

G4

48

A10 - 28x G4 - 02x

12

A10

A10 A10

A10

A10

A10 A10

A10 - 08x

page 10 of 13 (July/2018)

Page 11: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

Option: LEFT13

A10 A10 A10

5050 A10C6C6

31C6 A10

A10

A10 - 06x

C6 - 03x

page 11 of 13 (July/2018)

Page 12: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

14 Option: RIGHT A10

A10

A10

A10

A10

50C6

C6 31 C6

50

A10

A10 - 06x

C6 - 03x

page 12 of 13 (July/2018)

Page 13: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

BEDDING SPECIFICATION

- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

BED MATTRESS SPECIFICATIONS

Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9".

Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.

REPLACEMENT PARTS

- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at [email protected] - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.

ASSEMBLY TIPS

- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.

page 13 of 13 (July/2018)

Page 14: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

Stairway

Bedz King BK - 71

LEFT RIGHT

Thank you for purchasing your Furniture from Bedz King.

Every effort has been made to ensure your Furniture is of the finest quality. If you have any questions, please do not hesitate to contact us at [email protected]

page 1 of 15 (August/2019)

Page 15: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THIS BED

SAFETY WARNINGS AND GENERAL NOTES

Follow the information on the warning labels on the upper bunk bed structure and on the carton. Do not remove warning label from the bed.

Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.

The top surfaces of the mattress must be at least 5" below the upper edge of the guardrails.

Do not allow children under 6 years of age to use the upper bunk.

Prohibit more than one person on the upper bunk.

Periodically check and ensure that the guardrails, ladder and other components are in their proper position, free from damage, and that all connectors are tight.

Do not allow horseplay on or under the bed. Always prohibit jumping on the bed.

Always use the ladder for entering and leaving the upper bunk.

Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.

Use of a night-light may provide added safety for a child using the upper bunk.

If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.

Always use guardrails on both long sides of the upper bunk.

The use of a water or sleep floatation mattress is prohibited.

Keep these instructions for future reference.

We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.

Strangulation Hazard Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts, and jump ropes.

page 2 of 15 (August/2019)

Page 16: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

04

03 02

01 03

03

23 05

07 20 03 02

24 01

03

03

12

22

07 03

05

02

19 12 01

03

03

21 05

07 13 03

02

01 03

03

17 15

16 18

14

page 3 of 15 (August/2019)

Page 17: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

! WARNING:CHOKING HAZARD - - Small Parts

Not for Children.To be Assembled by an Adult.

A1

A5

A10

A16

B8

B19

B20

C1

C6

D16

E3

E4

G1

G3

G8

SCREWS ARE SHOWN IN ACTUAL SIZE

4,0x30

3,5x16

3,5x30

4,0x40

7,0x50

7,0x70

1/4"x50

8,0x30

10x50

L1

L2

10x10

! WARNING: CHOKING HAZARD - - Small Parts

Not for Children. To be Assembled by an Adult.

Qty. Extra

40

18

47 +2

6

10

6

8

94 +2

4

1

4

4

42

1

1

page 4 of 15 (August/2019)

Page 18: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

C101 C1 C1

C1 23 C1 C6

01 C1 C6 C6

C6 C1

C1

02

C1 C1

03 C1 C1C1

C1 C1

C1

2122

C1 C1 C1

C1

C1 C1C1

C1 15

C1C104 4x

16 4x

C1 - 94x C6 - 04x

02 B19B19B19

24

G3+B19G3+B19G3+B19

B19

G3 B19 - 06x G3 - 01x page 5 of 15 (August/2019)

Page 19: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

03

04

05

A1

01

A1

03 A1

A1

03 A1

02

A1 - 24x

03 A1

A1

05

A10 - 12x page 6 of 15 (August/2019)

A10

A10

A10

A10

A10

A10

A10

A10

04

A10 - 07x

A10 A10 A10 A10

A10

Page 20: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

06

07

Finishing side

A10

A10

A10 A10

21

A10 - 03

G1 G1

G1 G1 G1G1

G1 G1

G1

G1 G1

21

G1 G1 G1

G1 - 14x

08

A10

A10

A10 A10

22

A10 - 03 page 7 of 15 (August/2019)

Page 21: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

09

Finishingside

Finishingside

G1 G1

G1 G1 G1G1

G1 G1

G1

G1 G1

22

G1 G1 G1

G1 - 14x

10

A10

A10

A10 A10

23

A10 - 03

11

G1 G1

G1

G1 G1

G1

G1 G1

G1

G1 G1

G1 G1 23 G1

G1 - 14x page 8 of 15 (August/2019)

Page 22: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

12 - RIGHT

G8+B8

G8+B8

G8+B8

G8+B8

522

621

B8

G8

12 - LEFT

B8 - 04x G8 - 01x

G8+B8

G8+B8

522

G8+B8

G8+B8

621

B8

G8 B8 - 04x G8 - 01x

page 9 of 15 (August/2019)

Page 23: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

13 - RIGHT B8

1020

G8 043G8+B8

G8+B8

G8+B8

G8+B8 234

13 - LEFT

B8 - 04x G8 - 01x

B8

1020

G8+B8

G8+B8

304 G8

G8+B8

G8+B8 423

B8 - 04x G8 - 01x

page 10 of 15 (August/2019)

Page 24: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

14 - RIGHT B8

B8+G8 G8

B20 B20 B8+G8

B20

B20

B20

B20

B20

B20B20

B8 - 02x

B20 - 08x G8 - 01x

14 - LEFT

B8 G8+B8

G8

B8 - 02x B20 - 08x

G8 - 01x

G8 G8+B8 B20 B20

B20 B20

B20 B20 B20

G8

B20B20

page 11 of 15 (August/2019)

Page 25: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

15

Finishing

side

1715 16 4x

A1A1 A1

A10 A10

A10A10

18

A1 14

A1 - 16x A10 - 16x

16 A5

A5 E3 A5

A5

A5 E4

A5

4x A5 - 16x E3 - 04x E4 - 04x

17

A10

A10 A10

A10 A10

A10 A10

LEFT RIGHT A10 - 03x page 12 of 15 (August/2019)

Page 26: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

18 - RIGHT - TWIN

A16

A16

A16

01

A16

A16

D16 A16

A5 A5

01

18 - RIGHT - FULL A5 - 02x A16 - 06x D16 - 01x

01

A5D16

01 A5 page 13 of 15 (August/2019)

Page 27: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

19 - LEFT - TWIN

A16

A16

A16

A16

A16

A16

01

A5

D16 A5

01

A5 - 02x A16 - 06x D16 - 01x

19 - LEFT - FULL

01

A5 D16

A5 01

page 14 of 15 (August/2019)

Page 28: Bedz King Assembly Instructions | BK161 | Tall Twin over ... · -All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

BEDDING SPECIFICATION

- Always use the recommended size mattress or mattress support or both, to help prevent the likelihood of entrapment or falls. - All Bedz King bunk beds are supplied with a complete slat kit, so there is no need for a foundation or bunkie board.

BED MATTRESS SPECIFICATIONS

TWIN OVER TWIN Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the lower bunk.

TWIN OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.

FULL OVER FULL Upper Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the upper bunk. - Ensure thickness of mattress and foundation combined does not exceed 9". Lower Bunk: Only use a mattress that is 74" - 75" long and 52 1/2" - 53 1/2" wide on the lower bunk.

REPLACEMENT PARTS

- Replacement parts, including additional guardrails may be obtained by contacting Bedz King LLC at [email protected] - Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.

ASSEMBLY TIPS

- Power tools are not recommended for assembling your furniture. - Give yourself plenty of room to work. - Due to the size of this bunkbed, it must be assembled within the space it will occupy. - The assembly will require at least two people to complete. - Make sure all the fasteners are tight. - Take your time and read the instructions carefully.

page 15 of 15 (August/2019)