Beckhoff_Tire_Rubber
-
Upload
amir-mohammad-shoraka -
Category
Documents
-
view
220 -
download
5
description
Transcript of Beckhoff_Tire_Rubber
PC-based Control for the Tire and Rubber Industry
New Automation Technology BECKHOFF
2
Beckhoff | Open automation solutions for the rubber and tire ind
Rubber and tire production is based on a very complex process that requires control and coordination of different production stages. Compliance with top-quality standards is just one of many entrepre-neurial challenges the sector has to face. As suppliers to the automotive industry, rubber and tire producers are subjected to strong economic cycles and therefore fl uctuating demand. Other factors include enormous competitive and price pressures. What the sector needs in view of these underlying conditions are intelligent and cost-effective automation solu-tions. This is exactly what Beckhoff offers with its PC-based control, both for new systems and existing systems, in which the machines are often in good condition mechanically while the control and drive section is no longer state-of-the-art. In such cases, a retrofi t can achieve the required adaptation to market requirements and increase the productivity and reliability of the machines many times over. Many companies are not fully automated and operate in a very labour- and cost-intensive manner. However, in the long-term, the product quality expected by end users can only be combined with cost-effectiveness and profi tability of the production facilities through the application of cutting-edge production equipment.
In the tire industry the requirements for control technology are clearly defi ned: fast cycle times, precise positioning, fl exible program-ming and parameterisation, adequate memory for large process images, central control for sequential and positioning control, user-friendly user interfaces, integration in shop fl oor networks, open interfaces – and all that at low costs. In addition, the control components must also be able to withstand the extreme industrial conditions with high contamination and high temperatures encountered in vulcanisation, for example.
Cost-effective solutions for high performanceWith its extensive range of robust, high-performance Industrial PCs in compact design, without fans or rotating mass storage, industrial Con-trol Panels, a wide range of I/O components, the high-speed EtherCAT fi eldbus and cutting-edge Servo Drive Technology, Beckhoff offers an integrated, coordinated, scalable control system for the rubber and tire industry.
Through the application of top-quality industrial components Beckhoff Industrial PCs guarantee absolute reliability for 24-hour opera-tion. Advanced processors provide ample computing power for sequen-tial control, control and Motion Control on a single platform. The tire sector also benefi ts from the long-standing experience that Beckhoff has with embedded systems in the form of an extensive range of Embedded PCs in different performance classes. For each control task a tailor-made solution with regard to computing power, complexity and costs can be found based on standard components.
An industrial display unit (protection class IP 67) complements the Industrial PC. The Beckhoff Control Panels are the visually appealing front end of a tire production machine. Customers are offered an opti-mum control unit that is individually tailored to the requirements of the respective application. Distances of up to 100 m between the display/control unit and the control computer enable maximum fl exibility.
Continuity and opennessAll processes including control, regulation of pressure and temperature, Motion Control and HMI, run on a central CPU, resulting in optimum
transparency and fl exibility for the user. The high processor power offered by PC technology enables integration of all functions and replaces com-plex and expensive special hardware. The central control system, with local I/O level, also reduces the cabling effort and downtimes. Additional factors are cost and system benefi ts, for example due to the visualisation running on the same IPC that also deals with the machine control.
High performance thanks to EtherCATEtherCAT, the fast real-time Ethernet technology for industrial automa-tion, improves the update and reaction times by at least a factor of 10 compared with conventional fi eldbus technology. Apart from the standard Ethernet port, the PC controller requires no special plug-in cards. Conventional fi eldbus systems such as PROFIBUS or CANopen can easily be integrated into the EtherCAT I/O system via gateways. Simple and reliable connection technology reduces the cabling effort and there-fore the costs.
XFC (eXtreme Fast Control Technology), the EtherCAT-based control technology from Beckhoff, can also be used to optimise other areas of application in the tire industry, including high-precision acquisition of measuring probe events with time stamps, high-precision synchronisation of coupled servo axes, acquisition of measured values for quality assurance purposes with the aid of oversampling terminals, fast control of process pressures through fast analog terminals and TwinCAT controller structures, and high-precision and fast temperature measurement through temperature input terminals based on 4-wire technology.
It is conceivable that special hardware in measuring and testing machines will be entirely replaced by EtherCAT I/Os in the future.
BECKHOFF New Automation Technology We reserve the right to make technical changes.
3
ustry
beckhoff.com/rubber
TwinCAT – one software for all functionsTwinCAT, the automation software from Beckhoff, is a pure software PLC and Motion Control solution for PCs. PLC programming is based on the international IEC 61131-3 standard. Open communication interfaces support integration into existing visualisation, control and database systems. Process tracking or remote maintenance are therefore easy to realise. Comprehensive TwinCAT libraries with different control algo-rithms, cam and hydraulic controls, fl ying saw and cam plates simplify programming. Master and slave axes can be linked in almost any con-fi guration, and the high-performance and versatile motion functions cover all requirements of the tire industry: linear master/slave couplings with variable coupling factors can be used for angularly aligned applica-tion of carcass and belt layers onto the winding drum. The cam plate functionality enables angle-dependent wrapping of bandages onto the winding drum. The measuring probe function integrated in TwinCAT enables logging of actual positions “on the fl y” for determining the position and length of fabric and belt layers on supply and splice belts.
Integrated safetyIn recent years, operational and work safety have played an ever larger part in machine construction. In TwinSAFE, Beckhoff offers a uniform system solution for optimum synergy between automation and safety technology. The safety solution integrated in the fi eldbus also reduces the space requirement in the control cabinet and the wiring effort.
Beckhoff | New Automation TechnologyBeckhoff implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software. Products that can be used as separate components or integrated into a complete and seamless control system are avail-able for all industries. The Beckhoff “New Automation Technology” philosophy represents universal and open control and automation solutions that are used worldwide in a wide variety of different applications, ranging from CNC-controlled machine tools to intel-ligent building automation.
Innovative products and a full range of servicesSince the foundation of the company in 1980, continuous devel-opment of innovative products and solutions using PC-based control technology has been the basis for the continued success of Beckhoff. Many automation technology standards that are taken for granted today were conceptualised by Beckhoff at an early stage and successfully introduced to the market.– 1982: P1000 – single-board motion controller– 1986: PC Control – fi rst PC-based machine controller– 1989: Lightbus – high-speed fi eldbus utilising optical fi bre– 1990: All-in-one PC motherboard– 1995: Bus Terminal – fi eldbus technology in terminal block
format– 1996: TwinCAT – real-time software package under
Windows with PLC and Motion Control functions– 1998: Control Panel – remote IPC Control Panels– 2002: CX1000 – modular Embedded PCs for DIN rail
mounting– 2003: EtherCAT – real-time Ethernet fi eldbus system– 2005: TwinSAFE – safety solution for the Bus Terminal system– 2005: AX5000 – EtherCAT Servo Drive– 2007: Industrial Motherboards – Made in Germany– 2008: XFC – eXtreme Fast Control Technology
The Beckhoff PC Control philosophy and the invention of the Lightbus system, the Bus Terminals and TwinCAT automation software represent milestones in automation technology and have become accepted as high-performance alternatives to traditional control technology. EtherCAT, the real-time Ethernet solution, makes forward-looking, high-performance technology available for a new generation of leading edge control concepts.
Worldwide presence on all continentsThe central divisions of Beckhoff, such as development, produc-tion, administration, distribution, marketing, support and service are located at the Beckhoff Automation GmbH headquarters in Verl, Germany. Rapidly growing presence in the international market is taking place through subsidiaries in Austria, Belgium, Denmark, Finland, France, Italy, Poland, Russia, Slovenia, Spain, Sweden, Switzerland, Turkey, as well as in Australia, Brazil, Canada, China, India, South Africa, the United Arab Emirates and the USA. Through worldwide co-operation with partners, Beckhoff is represented in more than 60 countries.
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
4
Beckhoff | New Automation Technology
Industrial PCs in different designs and with a range of optional fea-tures offer the right solution for any application. PCs with industrial design are equipped with high-performance components, based on open standards.
The Embedded PCs of the CX series are designed for control tasks in the medium performance range. The compact Industrial PC can be mounted on a DIN rail, is modular and can be assembled depending on the required tasks.
The Bus Terminal is the open and fl exible I/O system for all common fi eldbuses. The wide choice of electronic block terminals covers the full range of input and output channels required in automation – from the digital and analog world right through to the serial interface.
The compact, robust Fieldbus Box modules function as decentralised I/Os right at the machine or plant. Their strong, sealed con-struction offers protection class IP 67: ideal for application in wet, dirty or dusty environ ments. The Fieldbus Box fi ts in with all common fi eld-bus systems.
EtherCAT is the real-time Ethernet system for industrial automation, offering fl exible topology and simple handling, among other benefi ts. The high-performance system enables control concepts that could not be realised with classic systems.
Industrial PCPC Control for all applications
Bus TerminalThe modular fi eldbus system for automation
Fieldbus BoxThe compact IP 67 modules
Embedded PCModular DIN rail IPCs and Industrial Motherboards
Beckhoff | The IPC Company
Beckhoff | The I/O Company
EtherCATUltra high-speed communication
BECKHOFF New Automation Technology We reserve the right to make technical changes.
Worldwide Support, Service, Training, Engineering
Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT™, TwinSAFE™ and XFC™ are registered trademarks of Beckhoff. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners. © Beckhoff Automation 2009, subject to change without prior notice. The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract. 5
Beckhoff | The Automation Company
Beckhoff | The Motion Company
Beckhoff is represented in over 60 countries around the world and offers comprehensive support and service, with fast and competent assistance guaranteed. The support department will not only advise you about technical questions, but also in the planning, programming and commis-sioning of complex automation projects.
The TwinCAT automation software integrates real-time control with PLC system, NC axis control and programming environment in a single package. The software PLC/NC/CNC is embedded in the Microsoft operating systems Windows NT/2000/XP/Vista, NT/XP Embedded and Windows CE. Programming is based on the IEC 61131-3 standards. TwinCAT links to all common fi eldbuses and PC interfaces for I/O signals.
The Drive Technology rounds off the comprehensive control system product range. The Synchronous and Linear Servomotors, in connection with Digital Servo Drives, are particularly suited to positioning tasks that make high demands on dynamics and stability. The variable fi eldbus connec-tion of the Servo Drives facilitates integration into different control environments.
Drive TechnologyThe drive system for high dynamic positioning tasks
TwinCATPLC and Motion Control on the PC
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
Preparation Mixing Tire building
The use of EtherCAT and XFC enables fast and precise extruder control. EtherCAT guarantees short cycle times and increases the output of cutting systems through shorter cutting cycles.
TwinCAT enables integration of different fi eldbus systems for variable-speed drives. High-performance Industrial PCs enable large process images and multitasking for process control, weighing, metering, con-trolling and palletising on a single platform.
This is where angularly aligned, linear gear coupling for layer feeding to the winding drum, cam plates for bandage winding and fast sequential control is used. PC Control combines user interface, sequential control and Motion Control on a single platform.
6
BECKHOFF New Automation Technology We reserve the right to make technical changes.
Beckhoff | PC-based control for tire production
Curing Material handling Testing machines
Beckhoff Control Panels in curing design with PLC function keys on the side enable conve-nient and fast operation of the curing press. Thanks to PC technology, the complete hea-ting process can be documented and transfer-red to higher-level systems in the network for archiving.
Beckhoff fi eldbus technology is ideal for extensive material handling systems. Thanks to the open architecture, local drive systems, bar code scanners and RFID systems can be integrated into the fi eldbus.
TwinCAT for controlling the machine process-es and the Motion Control solution, TwinSAFE for machine safety and EtherCAT as a fast communication system provide an ideal basis for testing machines.
7
TwinCATAutomation software for PLC and Motion Control, choice of Windows XP or CE operat-ing system with a uniform engineering tool for different processor platforms.
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
EtherCATEtherCAT is the real-time Ethernet fi eldbus for industrial automation, offering fl exible topology and simple handling, among other benefi ts. With its high communication speed and high user data rates, EtherCAT features the basic qualifi cation for fast control tech-nology.
Ethernet
Beckhoff | Universal system solutions for the tire and rubber indu
EtherCAT drivesThe AX5000 Servo Drive series sets new standards in drive performance. The AX5000 series is available with single- or multi-channel versions and is optimised with premium functionality that is still cost-effective when compared with competitive offerings. Integrated, high-speed control technology with a current control cycle of up to 31.25 µs supports fast and highly dynamic positioning tasks.
DVI/USB
Control Panel
Industrial PCWith the Industrial PCs and Panel PCs Beckhoff offers PC technology with top performance. The IPC is com-plemented by an industrial display unit. The Beckhoff Control Panels are the visual front end for machines or plants. Spatial separation of display/control unit and control computer offers maximum fl exibility.
8
BECKHOFF New Automation Technology We reserve the right to make technical changes.
EtherCAT I/O systemIndustrial Ethernet in an electronic terminal
block: The EtherCAT I/O system from Beckhoff offers full Ethernet compatibility, maximum utilisation of Ethernet
bandwidth and outstanding real-time performance. PROFIBUS devices or DeviceNet, for example, can be integrated via fi eldbus gateway terminals.
SafetySafety integrated: TwinSAFE terminals permit the connection of safety sensors and actuators.
Software PLC and Motion ControlTwinCAT integrates real-time control with PLC system, Motion Control and program-ming environment in a single package. Programming is executed in accordance with the IEC 61131-3 standard.
Windows operating systemsBeckhoff relies on the global Windows standard from Microsoft for the operating system. TwinCAT runs under Windows NT/2000/XP/Vista, NT/XP Embedded and Windows CE.
XFC – eXtreme Fast Control TechnologyXFC is based on an optimised control and communication architecture comprising an advanced Industrial PC, ultra-fast I/O terminals with extended real-time characteristics, the EtherCAT high-speed Ethernet fi eldbus, and the TwinCAT automation software.
stry
9
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
10
BECKHOFF New Automation Technology We reserve the right to make technical changes.
➔ IPC
➔ CX
➔ BX
➔ BC
Beckhoff | Customised automation
Beckhoff offers a scalable, modular control system that provides suitable solutions for any task in terms of computing capacity, complexity and costs. All Beckhoff controllers, irrespective of their performance class, are programmed in IEC 61131-3 via the TwinCAT automation software.
11
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
Software PLC and programming environmentThe TwinCAT software system converts any compatible PC into a real-time controller featuring multiple PLCs, a programming environment and an operating station. TwinCAT runs under Windows NT/2000/XP/Vista, NT/XP Embedded or Windows CE. PC Control enables connection to all common fi eldbuses and PC interfaces, as well as data interfacing via open standards such as OPC. TwinCAT PLC is an IEC 61131-3 PLC with four run-time systems for each PC and short cycle times from 50 µs. The stable real-time with a jitter < 2 µs enables central Motion Control with up to 255 axes in various master/slave combinations as well as interpolating. Engineering tools support the creation and maintenance of software.
PC ControlThe Beckhoff Industrial PCs represent the most powerful hardware platform for PC-based control technology. Beckhoff supplies Industrial PCs constructed in a variety of forms and equipped in various ways. The PCs feature industrial design and are equipped with top-performance components. They are based on open IT and automation standards. Individual housing constructions ensure optimised adaptation to the control requirements.
Embedded ControlThe Bus Terminal Controller series BC and BX are small controllers for the Beckhoff Bus Terminal system. The modular I/O system consists of electronic terminal blocks for direct sensor/actuator wiring and a Bus Coupler for connection to the bus system. Tailor-made solutions can be confi g-ured from a wide range of signal options.
Embedded PC ControlThe Embedded PCs of the CX series are optimised for control tasks in the medium performance range. The modular, small-format Industrial PCs are DIN rail mountable and can be confi gured according to the task in hand. The CX controllers with compact design combine PLC, Motion Control, I/O interface and visualisation. The CPU modules with different processors operate without fan or rotating storage media. Optionally, all main PC and fi eldbus interfaces and I/O components are expandable.
12
High-end PLC– international IEC 61131-3 programming standard– reusable software modules– almost unlimited memory– no restrictions in terms of number of blocks and variables– minimum PLC cycle times through native code generation– 1,000 instructions in < 1 µs (Core™2 Duo)– high-speed software solutions for camming, controllers, etc.– up to four run-time systems per PC, up to four tasks per
run-time system
Highly deterministic real-time capability– pure software solution, developed by Beckhoff– highly deterministic– pre-emptive multi-tasking from 50 µs– low jitter (< 2 µs with Core™2 Duo)– open fi eldbus interface
TwinCAT NC– PC-based Motion Control for up to 255 axes– support for a wide range of axis types:
– electrical servo axes– stepper axes– DC motors– hydraulic axes
– support for a wide range of drive interfaces:– EtherCAT and Lightbus– SERCOS– Profi Drive– CANopen– SSI– analog interfaces
– convenient commissioning and maintenance
Beckhoff | TwinCAT – The universal solution for PLC and Motion
beckhoff.com/TwinCAT
BECKHOFF New Automation Technology We reserve the right to make technical changes.
13
Software libraries– wide range of TwinCAT libraries
available– PLCopen Motion Control blocks– serial coupling– control technology
Motion Control functionality– point-to-point motion– gear coupling– master/slave coupling
– cam plates– Cam Design Tool– Motion laws can be modifi ed from
within the PLC.– position-synchronous coupling
(fl ying saw, fl ying shear)– synchronisation from any dynamic
phase– superposition– axis interpolation in 3 dimensions– programming according to DIN 66025– PLC library for NC interpolation
Control
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
Beckhoff | XFC – eXtreme Fast Control Technology
With XFC technology (eXtreme Fast Control Technology) Beckhoff presents
an ultra fast control solution: With XFC it is possible to achieve I/O response
times < 100 µs. This technology opens up new process optimisation opportunities that
were not possible in the past due to technical limitations.
XFC is based on optimised control and communication architectures:
Advanced Industrial PC
Ultra-fast I/O terminals
High-speed Ethernet EtherCAT
Automation software TwinCAT beckhoff.com/XFC14
BECKHOFF New Automation Technology We reserve the right to make technical changes.
XFC EtherCAT Terminals: Time stampEL1252:– 2-channel digital input 24 V DC– exact signal acquisition for edge changes– system accuracy < 1 µs– absolutely synchronised responses with EL2252EL2252:– 2-channel digital output 24 V DC– exact signal acquisition for edge changes– system accuracy < 1 µs– absolutely synchronised responses with EL1252
Synchronised responses can be realised with time stamp input and output
terminals; in the past, precision of < 1 µs was impossible with bus systems.
The new XFC technology replaces hardware wiring.
With the EL1202 and EL2202 XFC terminals, delays in the terminal hardware are
reduced down to < 1 µs and therefore become negligible. Input and output data
are for warded with maximum speed.
XFC EtherCAT Terminals: Fast I/OsEL1202:– 2-channel digital input 24 V DC– input delay TON/TOFF 1 µs– minimum response times without appreciable delayEL2202:– 2-channel digital output 24 V DC– input delay TON/TOFF 1 µs– minimum response times without appreciable delay
Cost benefi ts from using XFC– increased machine and system throughput
due to signifi cantly reduced signal delays– achieves faster sequences of motions– condition monitoring with standard control
system– standard I/O instead of expensive special
local controllers– standard I/O instead of expensive instrumen-
tation interfaces– measurement technology in integrated control
system, no separate system required
Very short controller cycle time– new performance class for PLC applications:
from 50 µs
Very fast I/O response time– from 85 µs– Deterministically synchronised conversion of
the input and output signal leads to reduced process timing jitter, independent of the communication and CPU jitter.
Distributed clocks– local absolute system synchronisation for CPU,
I/O and drive units– resolution: 10 ns, accuracy < 100 ns
Signal oversampling– multiplex signal conversion within one control
cycle– hard time synchronisation through distributed
clocks– for digital/analog input/output signals– sampling rates up to 100 kHz (analog) and
500 kHz (digital)– application
– fast signal monitoring, fast signal genera-tor output
– signal sampling independent of cycle time– fast controllers
Signal time stamp (resolution 10 ns)– exact edge time measurement for local digital
inputs– exact timing of local output signals, independ-
ent of the control cycle
15
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
Beckhoff | System overview
Panel PC CP65xx
EtherCAT
Ethernet
Digital Compact Servo DriveAX20xx
Synchronous ServomotorsAM2xxx, AM3xxx
Digital Compact Servo DriveAX25xx
Digital Compact Servo DriveAX5xxx
Bus Coupler BK1120 (K-bus inter face), Bus Terminals KL / KSxxxx
PCI Ethernet FC90xx
Coupler Box IL230x-B110
ExtensionBox IExxxx
Coupler EK1xxx, EtherCAT Terminals EL/ESxxxx
Compact Box IPxxxx-B31x
Coupler Box IL230x-B31x
ExtensionBox IExxxx
PLC Box IL230x-C31x(IEC 61131-3)
Bus Coupler BK3xx0,Bus Terminals KL / KSxxxx
PCI PROFIBUS FC310x
Bus Terminal Controller BC / BX31x0 (IEC 61131-3)
Panel PCC33xx
Panel PC C36xx
Panel PC CP71xx
Panel PC CP64xx
Panel PCCP77xx
Panel PC CP72xx
Panel PC CP62xx
TwinCAT NC PTP: PTP axis positioning software
TwinCAT PLC: IEC 61131-3 multi-PLC
TwinCAT NC I: 3-D axis interpolation software
TwinCAT
Industrial PC
DriveTechnology
Embedded PC
Fieldbus Box
EtherCAT
Lightbus
Bus Terminal
PC Fieldbus Cards
Panel PC CP67xx
Aut
omat
ion
IPC
I/O
Mot
ion
Embedded PC CX1010 Bus Terminals or EtherCAT Terminals
Embedded PC CX5010, CX5020 Bus Terminals or EtherCAT Terminals
Embedded PC CX1020, CX1030Bus Terminals or EtherCAT Terminals
EtherCAT Box EPxxxx
16
BECKHOFF New Automation Technology We reserve the right to make technical changes.
DALI
Ethernet TCP/IP
Fipio
Bus Coupler BK2xx0, Bus Terminal Controller BC2000 (IEC 61131-3)
EIBLON
CP-Link DVI/USBEthernet CP-Link DVI/USB
Linear ServomotorsAL2xxx, AL3xxx
Stepper MotorsAS1xxx
Compact Box IPxxxx-B5x0
Coupler Box IL230x-B5xx
ExtensionBox IExxxx
Compact Box IPxxxx-B5x 8
Bus Coupler BK5xx0,Bus Terminals KL / KSxxxx
Bus Terminal Controller BC/BX5xx0 (IEC 61131-3)
PCI CANopen FC510x PCI DeviceNet FC520x
Bus Coupler BK9xx0, Bus Terminal Controller BC/BX9xx0 (IEC 61131-3)
Coupler Box IL230x-B90x, PLC Box IL230x-C900 (IEC 61131-3)
Ethernet Switch CU20xx PCI Ethernet FC90xx
Compact Box IPxxxx-B200
Lightbus module Mxxxx
Coupler Box IL230x-B200
ExtensionBox IExxxx
PCI Lightbus FC200x ISA Lightbus C1220
Embedded PC CX9000, CX9010Bus Terminals DALI EIB
LON
K-bus extension
19-inch slide-in IPCC51xx
Control cabinet PC C62xx
Control cabinet PC C63xx
Control cabinet PC C69xx
Built-in Control Panel CP66xx
Built-in Control Panel CP68xx/CP69xx
Control Panel CP70xx
Control Panel CP78xx/CP79xx
Control cabinet PC C61xx
Built-in Control Panel CP60xx
TwinCAT CNC: CNC path control software
TwinCAT I/O: I/O software interface
TwinCAT CP: Control Panel driver
TwinCAT OPC: Visualisation interface
MP-Bus
Industrial MotherboardsCBxxxx
Embedded PC CX9000, CX9010EtherCAT Terminals
Built-in Industrial PC C65xx
Controlcabinet PCC66xx
17
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
Beckhoff | Worldwide
18
BECKHOFF New Automation Technology We reserve the right to make technical changes.
19
This fl yer gives a concise over-
view of products and solutions
for applications in the fi eld of
rubber and tire industry. The
main catalog “New Automation
Technology” and the web pages at
www.beckhoff.com offer detailed
descriptions and technical data
for the individual product groups
and information about associated
accessories.
BECKHOFF New Automation TechnologyWe reserve the right to make technical changes.
DK3
552-
0209Singapore, Malaysia,
Philippines, Vietnam, IndonesiaTDS Technology (S) Pte Ltd. 64 Sungei Kadut Loop(Hocen Building)Singapore 729493SingaporePhone: + 65 / 63 66 16 61 [email protected]
Thailand TDS Technology (Thailand) Co., Ltd.50/962 Moo 2Bengyeetos ThanyaburiPratumthanee12130 BangkokThailandPhone: + 66 (0) 2569 [email protected]
T & R Electronic (Thailand) Co., Ltd.120/62 Moo 8 Bang Sare Sattahip Chonburi 20250 ThailandPhone: + 66 (0) 3873 [email protected]
South KoreaTri-TEK Corp.717 DaeRyung TechnoTown III 448 KasanDong KumcheonguSeoul 153-803KoreaPhone: + 82 2 / 2107-32 [email protected]
TaiwanJI-DIEN Co., Ltd.9F., No. 22, Sec. 1, Zhongshan Rd.Xingzhuang CityTaipei County 242Taiwan (R.O.C.) Phone: + 886 (2) 8522 3237 [email protected]
United Arab Emirates, Oman, Qatar, Bahrain, Kuwait, Saudi Arabia, Jordan, Lebanon, Syria Beckhoff Automation FZEC# 608, Dubai Silicon OasisP.O. Box No. 341007DubaiUnited Arab EmiratesPhone: + 971 4 5015480 [email protected]
AustraliaAustraliaBeckhoff Automation Pty. Ltd.Level 16, 10 Queens RoadMelbourne, Victoria, 3004AustraliaPhone: + 61 (3) 99 12 54 [email protected]
New ZealandW. Arthur FisherP.O. Box 12747PenroseAuckland New ZealandPhone: + 64 9 / 2 70 01 [email protected]
Headquarters
Beckhoff Automation GmbHEiserstraße 533415 VerlGermanyPhone: + 49 (0) 52 46 / 9 63 - [email protected]
EuropeGermanyOffi ce BalingenBeckhoff Automation GmbHKarlstraße 1972336 BalingenGermanyPhone: + 49 (0) 74 33 / 2 60 24 - [email protected]
Offi ce BerlinBeckhoff Automation GmbHFasanenstraße 8110623 BerlinGermanyPhone: + 49 (0) 30 / 88 71 16 - [email protected]
Offi ce FrankfurtBeckhoff Automation GmbHTorhaus WesthafenSpeicherstraße 5960327 Frankfurt am MainGermanyPhone: + 49 (0) 69 / 68 09 88 - 0 [email protected]
Offi ce HanoverBeckhoff Automation GmbHPodbielskistraße 34230655 HanoverGermanyPhone: + 49 (0) 5 11 / 87 57 58 - [email protected]
Offi ce Lübeck Beckhoff Automation GmbHWahmstraße 56 23552 LübeckGermany Phone: + 49 (0) 4 51/ 20 39 88 - 0 [email protected]
Offi ce MunichBeckhoff Automation GmbHIndustriestraße 3182194 Gröbenzell/MunichGermanyPhone: + 49 (0) 81 42 / 4 10 59 - [email protected]
Offi ce NurembergBeckhoff Automation GmbHOstendstraße 19690482 NurembergGermanyPhone: + 49 (0) 9 11 / 5 40 56 - [email protected]
Sales Offi ce RavensburgBeckhoff Automation GmbHParkstraße 4888212 RavensburgGermanyPhone: + 49 (0) 7 51 / 3 54 15 [email protected]
Offi ce Rhein/RuhrBeckhoff Automation GmbHEurotec-Ring 747445 MoersGermanyPhone: + 49 (0) 28 41/ 9 08 16 - [email protected]
AustriaHeadquartersBeckhoff Automation GmbHHauptstraße 46706 BürsAustriaPhone: + 43 (0) 55 52 / 6 88 13 - [email protected]
Sales Offi ce OberösterreichBeckhoff Automation GmbHSoftwarepark 354232 HagenbergAustriaPhone: + 43 (0) 72 36 / 2 09 25 - [email protected]
Sales Offi ce NiederösterreichBeckhoff Automation GmbHLeobersdorferstraße 422560 BerndorfAustriaPhone: + 43 (0) 26 72 / 8 20 [email protected]
Sales Offi ce TirolBeckhoff Automation GmbHKlammstraße 66 / 396020 InnsbruckAustriaPhone: + 43 (0) 512 / 236 [email protected]
Belgium, LuxembourgBeckhoff Automation BVBAKempische Steenweg 305 bus 2023500 HasseltBelgiumPhone: + 32 (0) 11 / 24 08 [email protected]
Multiprox N.V.Lion d‘Ôrweg 12P.b. 719300 AalstBelgiumPhone: + 32 (0) 53 / 76 65 [email protected]
BulgariaKastiva GmbH 68-72 Ami Bue Str., 4. Floor1612 Sofi aBulgaria Phone: + 3 59 (2) 9 50 44 31 offi [email protected]
CroatiaKrovel d.o.o.Barutanski jarak 11410000 ZagrebCroatiaPhone: + 3 85 / 16 11 77 [email protected]
Czech Republic, Slovac RepublicDyger s.r.o. Vystaviste 1648 59 BrnoCzech RepublicPhone: + 420 5 / 41 32 10 04 [email protected]
DenmarkHeadquartersBeckhoff Automation ApSNaverland 22600 GlostrupDenmarkPhone: + 45 43 / 46 76 [email protected]
Offi ce HobroBeckhoff Automation ApSMajsmarken 19500 HobroDenmarkPhone: + 45 76 / 36 38 [email protected]
Offi ce KoldingBeckhoff Automation ApS Centervej 2 6000 Kolding Denmark Phone: + 45 76 / 31 20 72 [email protected]
Finland, EstoniaHeadquartersBeckhoff Automation OyP.O. Box 23Kankurinkatu 4-605801 HyvinkääFinlandPhone: + 358 (0) 20 / 7 42 38 [email protected] www.beckhoff.fi
Sales Offi ce SeinäjokiBeckhoff Automation OyMatinkatu 260320 SeinäjokiFinlandPhone: + 358 (0) 20 / 7 42 38 [email protected]
Sales Offi ce TampereBeckhoff Automation OyHermiankatu 1 B33720 TampereFinlandPhone: + 358 (0) 20 / 7 42 38 [email protected]
FranceBeckhoff Automation SarlImmeuble “Le Montréal”ZA de Courtaboeuf19 bis, avenue du Québec91951 Courtaboeuf CedexFrance Phone: + 33 (0) 1 69 29 83 [email protected]
Great Britain, IrelandHayes Control SystemsThe BoathouseStation RoadHenley-on-ThamesOxon RG9 1AZGreat BritainPhone: + 44 14 91 / 41 05 [email protected]
Greece, CyprusL. J. Skourgialos Industrial Automation Systems241 EL. Venizelou176 73 Kallithea /AthensGreecePhone: + 30 / 21 09 51 02 [email protected]
HungaryControrg Kft.Pajta u. 148200 VeszpremHungaryPhone: + 36 / 88 42 40 [email protected]
ItalyHeadquartersBeckhoff Automation S.r.l.Via E. Majorana, 120054 Nova Milanese (MI)ItalyPhone: + 39 03 62 / 36 51 [email protected]
Offi ce BolognaBeckhoff Automation S.r.l.Via Zanini, 740011 Anzola dell‘Emilia (BO)ItalyPhone: + 39 05 1 / 73 15 [email protected]
Offi ce PaduaBeckhoff Automation S.r.l.Via Alsazia, 3/B35127 Padua (PD)ItalyPhone: + 39 0 49 / 8 70 48 [email protected]
Lithuania, Latvia, BelarusSantavilté UABTaikos 14952119 Kaunas Lithuania Phone: + 3 70 37 / 35 01 66 [email protected]
NetherlandsIndustrial Automation LinkKüppersweg 712031 EB HaarlemNetherlandsPhone: + 31 23 / 5 18 51 [email protected]
PolandBeckhoff Automation Sp. z o.o.Stara Iwiczna, ul. Sloneczna 116A05-500 PiasecznoPoland Phone: + 48 22 / 7 57 26 10 [email protected]
PortugalBresimar Automação, S.A.Quinta do Simão – EN109 – EsgueiraApartado 30803801-101 AveiroPortugalPhone: + 351 234 / 30 33 [email protected]
Romania Kreatron Automation S.R.L.Str. Octavian Fodor nr. 113, ap. 13400434, Cluj-Napocajud. ClujRomania Phone: + 40 264 / 48 47 08 offi [email protected]
RussiaHeadquartersBeckhoff Automation OOOUl. Bakuninskaya 14, Building 9105005 MoscowRussiaPhone: + 7 495 / 9 81 64 [email protected]
RepresentationNorth-West Federal DistrictBeckhoff Automation GmbHV.O., 7-ya Liniya, 76, Offi ce 620 199178 Saint-Petersburg Russia Phone: + 7 812 / 332 62 05 [email protected]
RepresentationUral Federal DistrictBeckhoff Automation GmbHUliza Komsomolskaya 37,Offi ce 402/4620049 EkaterinburgRussiaPhone: + 7 3 43 / 3 79 98 [email protected]
RepresentationVolga Federal DistrictBeckhoff Automation GmbHKrasnoarmayskaya ul.1, Offi ce 312 443010 SamaraRussiaPhone: + 7 846 / 2 69 80 [email protected]
SloveniaBeckhoff Avtomatizacija d.o.o.Zbiljska cesta 41215 MedvodeSloveniaPhone: + 3 86 / 13 61 30 [email protected]
SpainHeadquartersBeckhoff Automation S.A.Edifi cio Testa Sant CugatAvda. Alcalde Barnils, 64-6808174 Sant Cugat (Barcelona)SpainPhone: + 34 93 / 5 84 49 [email protected]
Sales Offi ce BilbaoBeckhoff Automation S.A.Edifi cio UdondoC. Ribera de Axpe, no 504a planta, Ofi cina 4-548950 Erandio (Bilbao)SpainPhone: + 34 94 / 4 31 40 [email protected]
Sales Offi ce MadridBeckhoff Automation S.A.Edifi cio CimagaSierra de Cazorla, 1Planta Baja, Ofi cina E28290 Las Matas (Madrid)SpainPhone: + 34 91 / 6 36 43 [email protected]
Sweden, NorwayHeadquartersBeckhoff Automation AB Stenåldersgatan 2B 21376 Malmö Sweden Phone: + 46 (0) 40 / 6 80 81 60 [email protected] www.beckhoff.se
Sales Offi ce DanderydBeckhoff Automation ABEnebybergsvägen 10B18236 DanderydSwedenPhone: + 46 (0) 8 / 4 46 30 [email protected]
Sales Offi ce VärnamoBeckhoff Automation ABVästbovägen 5333153 VärnamoSweden Phone: + 46 (0) 40 / 6 80 81 [email protected]
Sales Offi ce ElverumBeckhoff Automation ABGeneral Rugesv. 32407 ElverumNorwayPhone: + 47 95 96 80 [email protected]
SwitzerlandHeadquartersBeckhoff Automation AGRheinweg 98200 SchaffhausenSwitzerlandPhone: + 41 (0) 52 / 6 33 40 [email protected]
Sales + Support Center Suisse RomandeBeckhoff Automation AGEn Chamard 351442 Montagny-près-YverdonSwitzerlandPhone: + 41 (0) 24 / 447 27 - [email protected]
Support Center Ticinop.project saglVia Pianella 196596 GordolaSwitzerland Phone: + 41 (0) 91 / 745 01 [email protected]
TurkeyBeckhoff Otomasyon ltd. sti.Gardenya-3 Plaza No: 18-1934758 Atasehir IstanbulTurkeyPhone: + 90 216 580 [email protected]
North AmericaUSAHeadquartersBeckhoff Automation LLC12150 Nicollet Avenue SouthBurnsville, MN 55337USAPhone: + 1 952 / 890 [email protected]
East SalesBeckhoff Automation LLCNew Oxford, PAUSAPhone: + 1 717 / 479 [email protected]
Beckhoff Automation LLCCleveland, OHUSAPhone: + 1 330 / 725 [email protected]
Beckhoff Automation LLCCanton, MI USAPhone: + 1 248 / 230 [email protected]
Beckhoff Automation LLCApex, NC USAPhone: + 1 919 / 367 [email protected]
Beckhoff Automation LLCLake Wylie, SCUSAPhone: + 1 803 / 746 54 [email protected]
East Application DevelopmentBeckhoff Automation LLCRed Lion, PAUSA Phone: + 1 717 / 378 [email protected]
Beckhoff Automation LLCGlenn, MIUSAPhone: + 1 269 / 227 [email protected]
Beckhoff Automation LLCParma, OHUSAPhone: + 1 440 / 882 [email protected]
Central SalesBeckhoff Automation LLC12150 Nicollet Avenue SouthBurnsville, MN 55337USAPhone: + 1 952 / 808 [email protected]
Beckhoff Automation LLCFond du Lac, WI USAPhone: + 1 920 / 929 [email protected]
Beckhoff Automation LLCChicago, ILUSAPhone: + 1 630 / 631 [email protected]
Beckhoff Automation LLCAustin, TXUSAPhone: + 1 512 / 250 [email protected]
Beckhoff Automation LLCJustin, TXUSAPhone: +1 817 / 428 [email protected]
Central Application DevelopmentBeckhoff Automation LLCHartford, WIUSAPhone: + 1 262 / 670 [email protected]
Beckhoff Automation LLCRipon, WIUSAPhone: + 1 952 / 266 [email protected]
Beckhoff Automation LLCChicago, ILUSAPhone: + 1 815 / 609 9984 [email protected]
Beckhoff Automation LLCPfl ugerville, TXUSAPhone: + 1 512 / 252 [email protected]
West SalesBeckhoff Automation LLCDenver, COUSAPhone: + 1 303 / 429 [email protected]
Beckhoff Automation LLCSan Jose, CAUSAPhone: + 1 408 / 823 [email protected]
Beckhoff Automation LLCLa Crescenta, CAUSAPhone: + 1 818 / 224 [email protected]
Beckhoff Automation LLCPhoenix, AZUSAPhone: + 1 480 / 268 [email protected]
West Sales and Application DevelopmentBeckhoff Automation LLC16000 Bothell Everett HighwaySuite 170Mill Creek, WA 98012USAPhone: + 1 425 / 451 [email protected]
West Application DevelopmentBeckhoff Automation LLCDenver, COUSAPhone: + 1 303 / 667 [email protected]
West Coast Sales and Technical CenterBeckhoff Automation LLC5820 Oberlin DriveSuite 111San Diego, CA 92121USAPhone: + 1 858 / 546 [email protected]@beckhoff.com
CanadaHeadquartersSales and Application DevelopmentBeckhoff Automation Canada Ltd.130 Research Lane, Unit 11Guelph, ON N1G 5G3CanadaPhone: + 1 905 / 852 [email protected]
SalesBeckhoff AutomationCanada Ltd.London, ON CanadaPhone: + 1 519 / 451 [email protected]
MexicoMexico Sales and Application DevelopmentIntegra Automation, SA de CVAv. Industrias 325-A78399 Fracc. TalleresSan Luis Potosí, S.L.P.MexicoPhone: + 52 444 / 822 2615 al [email protected]
South AmericaArgentinaeFALCOMAlcorta 2411CPA B1744HFMMoreno / Buenos AiresArgentinaPhone: + 54 237 / 463 [email protected] www.efalcom.com
BrazilBeckhoff Automação Industrial Ltda. Rua Continental, 146 – Jd. do MarSão Bernardo do Campo São Paulo 09750-060 Brazil Phone: + 55 (11) 4126-3232 [email protected] www.beckhoff.com.br
ChileTecmel Chile S.A.Padre Orellana 1486 SantiagoChile Phone: + 562 / 596 [email protected] www.tecmelchile.cl
Costa Rica, Panama, Nicaragua, Honduras, El Salvador, Guatemala, BelizeTecnologías de Automatización de America Central S.A.Montes de Oca 2050San JoséCosta RicaPhone: + 506 22 24-87 [email protected]
UruguayComando Ltda.Dr. J. de Salterain 1142Montevideo 11200UruguayPhone: + 598 (2) / [email protected]
AfricaEgypt Industrial Control Systems ICS 29 Dr. Mohamed El Harouny Street Nasr City, Cairo 11371 Egypt Phone: + 20 2 / 2 75 50 31 [email protected] www.ics-me.com
South AfricaBeckhoff Automation (Pty) Ltd Unit 8, Boskruin Business Park, Randpark Ridge Randburg 2188 South Africa Phone: + 27 (0) 11 792 3374 [email protected] www.beckhoff.co.za
AsiaChina HeadquartersBeckhoff Automation (Shanghai) Co.,Ltd5th Floor, No.163 JiangChang San Road Shanghai Shibei Industrial ZoneShanghai, 200436P.R. ChinaPhone: + 86 21 / 66 31 26 [email protected]
Representation Beijing Beckhoff Automation GmbHRoom 1608, Tower B, Investment Plaza, No. 27 Financial Street Xicheng DistrictBeijing, 100032P. R. China Phone: + 86 10 / 66 21 09 91 [email protected]
Representation Guangzhou Beckhoff Automation GmbHRoom 4118-4119Yaozhong Plaza9 West Linhe RoadTianhe DistrictGuangzhou, 510620P.R. ChinaPhone: + 86 20 / 38 01 03 [email protected]
IndiaBeckhoff Automation Pvt. Ltd. Suite 4, Level 6, Muttha Towers Don Bosco Marg Pune – 411 006 India Phone: + 91 20 / 40 00 48 00 [email protected] www.beckhoff.co.in
Inteltek Automation Pvt. Ltd.Sr.no.100/5, AmbegaonPune – 411 046MaharashtraIndiaPhone: + 91 20 / 24 31 81 [email protected]
JapanK.MECS Co., Ltd.Yusen Iwamotocho Blg. 3F2-3-3 Iwamotocho, Chiyoda-City,Tokyo 101-0032JapanPhone: + 81 3 5825 [email protected]