BAILEYS

WARRANTY BOOKLET DIESEL INJECTION EQUIPMENT

2

WARRANTY CERTIFICATE FOR FUEL INJECTION EQUIPMENT

The injection equipment that this warranty card pertains to has had OE certified assembly, calibration and testing procedures completed. Bound by ISO 9001, and ISO 4008, every replacement part, be it mechanical or electronic, has been carefully validated and assembled to exacting tolerances, supported by actual dynamic testing to and exceeding ISO and manufacturer tests and calibration standards.

This equipment has tolerances generally less than 0.005mm, and any foreign matter larger than this can have serious and immediate consequences. Therefore, in order to obtain lasting results, we recommend that the entire fuel supply system (like filters, lines, connections…) undergo thorough cleaning and or replacement where necessary.

After having worked on this equipment, we will have a comprehensive file on hand of the condition reports, testing reports and validations for at least 7 years. Given this information and its relative ease at hand, we are possibly your best option for any subsequent trouble shooting or emergency repairs into the future. Just call, we’re always happy to help.

The Combustion Specialist team at Baileys Diesel thanks you for your custom and well found confidence in our works, which is reflected in our industry leading warranty you hold in your hands. Please take the time to read and understand it, as well as return the warranty card included within this pack, as this extended warranty only becomes effective once done so.

3

BDG WARRANTY STATEMENT

Baileys Diesel Fuel Injection Pty Limited, Baileys Diesel Service Pty Ltd, Baileys Diesel Group Pty Ltd, BDG (the “Company”), Warrants the following spare parts and/or services (the “product”), IF and only if the following points are met to the satisfaction of the Company:

• All installation of any items serviced by the Company or goods supplied by it is carried out by an accredited Diesel technician or similar;

• Fuel filters are always replaced when fitting any overhauled or repaired fuel pumps or injectors;

• All fuel lines are completely removed and the tanks cleaned out;• Fuel pump timings are correctly set when installing a fuel pump;

and• All equipment is tightened to the manufacturer’s specification

THEN the Company warrants to the original buyer of the product (the “Customer”):That the goods and/or services are of merchantable quality, fit for the purpose for which they are designed and ordinarily used, and substantially free from defects, whereby a defect is defined as a condition within the product that would render the product inop-erable under normal conditions of use and service; and that it will repair or replace, free of charge, any product which has a defect in material or workmanship within the warranty period de-scribed below.

The Company’s liability under this Warranty, including any econom-ic or consequential loss you may sustain, shall be limited to either replacing or repairing the products, at the option of the Company, and in the case of repairs, to carrying out the repairs again. In no case does the obligation on the Company exceed the original purchase price of the product as indicated on the original bill of sale or receipt. Under no circumstances will the Company be liable for any travel time incurred in diagnosis for defects, or any other contingent expenses.

This Warranty shall not apply to any defect caused by:• Repair, alteration or modification carried out by the Customer

or any third party without written consent from the Company;• Accident, abuse or neglect;• Normal wear and tear;• Product having been used for any purpose other than that for

which it was designed;• The use of any fuel additives/fuel contamination.• The use of any non-standard diesel fuel, for example biofuels

and biodiesel.

A fully completed Warranty Application Form (WAF), signed and returned to BDG, along with a copy of the original invoice, must accompany any product returned by the Customer for warranty determination.

The Company will be the final authority on the approval of all warranty claims hereunder. The completion of a WAF does not represent an approval in warranty claim. All repaired or replaced products will be available to the Customer ex works Unanderra, Wollongong, NSW. Also the cost of any freight to or from BDG is to be borne by the Customer.

Accepted warranty products, which have been replaced, will become the sole property of the Company.Until the Company has approved a warranty claim, the Customer will be responsible for all costs. Replacement parts and the labour costs incurred by the removal and replacement of the product while performing warranty work will be the responsibility of the Customer.

To the extent permitted by law, the Customer hereby waives all rights other than those expressly set out herein and acknowledges that this warranty sets out the Customer’s exclusive remedies with respect to products covered by it. This warranty shall not be extend-ed, amended or varied except by written instrument signed by the Company & the Customer. The employees, distributors and agents of the Company are not authorised to make modifications to this Warranty or to make or to give any additional warranties on behalf of the Company. This warranty is limited to the original purchaser of the product and is not transferable to subsequent owners.

All goods and/or services supplied are covered by such warran-ty as is specified by the original manufacturer and the Company makes no warranty express or implied in respect of parts or com-ponents supplied by outside contractors. The Customer must rely on the benefit of any Warranty given by such outside contractor. The installation of BDG aftermarket parts at our clients’ knowledge or by direct request may void the OEM warranty. BDG is not responsible for OEM warranties or how they are administered.

Where the Trade Practices Act or similar State or Territory legisla-tion implies into the contract for the supply of goods or services, any term, condition or warranty, and that legislation avoids or pro-hibits provisions in a contract excluding or modifying them, then the term, condition or warranty shall be deemed to be included in the contract.

Subject to the above, all warranties, express or implied, as to the goods or services supplied by the Company, are expressly neg-atived and excluded, and are provided at the discretion of the Company.

Please refer to the products covered by Warranty and applicable time limitation per product. See page 4.

4

BDG WARRANTY DETAILS

DISCLAIMER OF LIABILITY

* Warranty is based on whichever occurs first (Months or Kilometres or Operating Hours) and will be validated from date of BDG invoice document. In case that you are uncertain about the BDG Warranty Cover applicable to BDG supplied Diesel Fuel Injection Equipment and Labour, please contact our Office on 02 4272 2600 for Clarification. Thank You

Other than as expressly set forth herein, the Company, together with its distributors, jobbers and dealers shall in no way be responsible for the product’s proper use and service. In no event shall the Company be liable for any special, incidental, indirect or consequential damages of any kind or nature, whether or not the Customer was advised of the possibility of damage, arising or resulting from the use or performance of the product, and the Customer hereby waives any and all such claims.

The Customer acknowledges that he/she/it is not relying on the Company’s skill or judgement to select or furnish goods suitable for any particular purpose and that the Company has no liability that will extend beyond the scope of the limited warranty contained herein, and the Customer hereby waives all remedies or liabilities, expressed or implied, arising by operation of law or otherwise, (including, without limitation, any obligations of the Company with respect to fitness for any particular purpose; merchantability; and special, incidental, indirect or consequential damages) or whether or not occasioned by the Company’s negligence.

The Company disclaims any warranty and expressly disclaims any liability for personal injury or damages related to the Customer’s use of the product. The Customer acknowledges and agrees that the disclaimer of any liability for person injury is a material term for this Agreement and the Customer agrees to indemnify the Company and hold the Company harmless for any claim related to the product and its use or performance. Under no circumstances will the Company be liable for any damages, liabilities, costs or expenses incurred as a result of by reason of the use, performance or sale of the product, including without limitation, any damages, liabilities, costs or expenses incurred by reason of the Customer’s negligence related to those uses of the product as a result of the removal of the speed limiter, where it applies.The Company assumes no liability regarding the improper installation or misapplication of the product. It is the installer’s responsibility to check for proper installation, and, if in doubt, contact the manufacturer.

Product Months / Kilometres / Operating Hours *

VE & VP Pumps 24 / 100,000

Inline Fuel Pumps 24 / 100,000

Common Rail 24 / 40,000

Unit Pumps 24 / 100,000

Unit Injectors 24 / 100,000

Injectors 24 / 40,000 OR 1200 Operating Hours (Medium Speed Engines), OR 500 Operating Hours (High Speed Engines)

Single Cylinder Pumps 24 / 100,000 OR 5,000 Operating Hours (Medium Speed Engines), OR 2,000 Operating Hours (High Speed Engines)

BDG WARRANTY APPLICATION / VALIDATION CHANGE

In order to activate your Unique extended Baileys warranty, you are required to return the below tear off section, completely filled out, or submit complete the electronic copy found online at the www.Baileysdiesel.com website under the Warranties tab.

Have you Read the Terms and Conditions as stipulated on

the reverse side of your Invoice?

Yes No

Has the surrounding equipment (fuel/oil supply lines) been

adequately cleaned, tanks cleaned and filters changed?

Yes No

Has the fuel supply pump been altered in any way?

Yes No

Completed By: (please Print) Signed By: Date:

Please circle: Installation completed by Enduser Workshop

Installation completed by contracted Tradesperson

If Tradesperson, please state Company Name

Any Additional Comments:

Please detach BDG - Warranty Application Form 2012 and mail to: Warranty Administration c/o Baileys Diesel Group 36, Investigator Drive, Unanderra NSW 2526. Thank you.

Job or Invoice Number: Name / Company Name:

Have you had the Equipment installed by a certified

Tradesman and acccoring to OEM recommendations?

Yes No

Has all bolts been torqued down to the correct Torque Settings as

stipulated by the OEM / OEM handbook?

Yes No

Please complete the following vehicle / engine operation read-out

data:

Operating Hours kms

5

6

BDG CALIBRATION CERTIFICATE

The Baileys Diesel Group takes the quality of its works very seriously; hence we would like to SHOW you exactly how your fuel pump performs. EVERY piece of fuel injection equipment that leaves our facility has been tested and approved to OEM, manufacturer and Baileys standards.

In order to do this, every piece of equipment is dynamically operated, replicating real engine operation, and then measured + adjusted until perfect for these conditions. It’s by taking such lengths we’re so confident of our Quality and performance that you have this industry leading 2 year warranty document in your hands.

The certificate found opposite shows the ACTUAL output of your injection equipment during these tests, and serves as proof of perfect functioning + performance before being sent to you. Should this protocol be missing, please contact our offices on +61 (0)2 42 722 600 to receive your copy ASAP.

BAILEYS

We Measure - Compare - Improve

Baileys Diesel GroupC/O Baileys Diesel Technology Centre

36 Investigator DrUnanderra, NSW 2526

Phone: +61 2 4272 2600Fax: +61 4 4271 7587

Email: info@baileysdiesel.com.au

www.baileysdiesel.com