BBLADES - O.E.M REPLACEMENTLADES - O.E.M REPLACEMENT
Transcript of BBLADES - O.E.M REPLACEMENTLADES - O.E.M REPLACEMENT
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-005 1704100 16-1/8 3/4 13/32 2-9/16 2 .203
(3) for 44” cut, small frame garden tractor 1989 and later.
335-044 1737228BZ1737228BZYP
16-1/8 .795 none none 2-1/2 .204
(3) for 46” cut. Found on Simplicity, Massey Ferguson. Fits on Massey Ferguson models: 130 and 2523.
335-045 1737252 18-1/2 .795 none none 2-1/2 .204
(3) for 52” cut. Found on Simplicity, Massey Ferguson. Fits on Massey Ferguson models: MF2523, MF355X, MRZT26520.
335-198 1737816BM1737816BMYP
21-3/16 .798 none none 2-1/4 .170
(2) for 42″ cut.
330-032 1758878BMYP 21-5/16 13/16 none none 2 .204
(2) for 42” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers. Found on Simplicity Courier Zero Turn Riders, 23 Hp with 42” Fab decks. Fits 42” Fabricated Deck, 360Z Model No. 2691317.
360-914 17592621759262BMYP
21-5/16 13/16 none none 2-1/2 .204
(2) for 42” cut, Shark Tooth mulching blade. Fits Snapper 42” Fabricated Deck, 360Z Model No. 2691317.
MAXIM - see ARIENSMTD - also see CUB CADET
335-729 742-0252942-0252
6-7/16 3/8 none none 1-1/2 .090
(1) 335-729 and (2) 335-737 for 44″ cut, side discharge models also found on WHITE & YARDMAN Tractors.
335-798 742-0539942-0539
12-1/2 1-1/2 29/64 2-1/2 3-1/2 .125
Cross blade, (2) 335-798 and (2) 335-790 for 38″ cut, or (2) 335-798 and (2) 335-782 for 42″ cut
335-533 942-0543 753-0571 742-0543
14-13/16 6 pointstar (11/16)
5/16 2-1/2 3 .125
(1) 335-533 & (2) 335-525 for 46” cut, replaces star centre hole, Centre blade for 600 & 800 series, 1996 & earlier
335-125 742-0486942-0486 / A
14-13/16 13/32 5/16 2-1/2 3 .150
(1) 335-125 and (2) 335-117 for 46″ cut, side discharge.
335-449 742-0645 942-0645
14-7/8 6 pointstar (5/8)
5/16 2-1/2 3 .125
(1) 335-449 and (2) 335-455 for 46″ cut, replaces star centre hole, Centre blade for 600 & 800 series built since 1997
360-607 see above 14-7/8 6 pointstar (5/8)
none none 2-1/2 .187
(1) 360-607 and (2) 360-609 for 46″ cut, Shark tooth mulching blade.
MASSEY FERGUSON - also see SIMPLICITY & SNAPPER
09-01
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-453 742-0612942-0612
14-7/8 6 point star (5/8)
3/8 2-1/2 2-1/2 .149
759-04106(1) 335-453 and (2) 335-452 for 46” cut - star center hole, CENTER blade. Fits CUB CADET, MTD, TORO, TROY BILT etc. 3 in 1 mulching blade.
325-884 742-04124 942-04124
14-7/8 6 point star (5/8)
3/8 2-1/2 2-1/2 .203
(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade.Fits LT1046 and i1046 series mowers. For star hole replacement blade.
360-607 see above 14-7/8 6 pointstar (5/8)
none none 2-1/2 .187
(1) 360-607 and (2) 360-609 for 46″ cut, Shark tooth mulching blade.
335-547 742-0118942-0118
15-5/16 13/32 5/16 2-1/2 2 .134
(2) for 30″ cut, Side discharge models 390, 395, 425, 430, 434, 435, 460, 138-390A, 138-395A, W7-C392-B
335-117 742-0477 742-0480
16-1/4 13/32 5/16 2-1/2 3 .149
742-0487 / 942-0480 / 942-0487A(2) 335-117 for 32″ cut, or (2) 335-117 and (1) 335-125 for 46” cut. Side discharge
For “MTD” star center hole applications - please see page 09-06335-455 742-0644
942-064416-1/4 6 point
star (5/8)5/16 2-1/2 3 .125
(2) 335-455 & (1) 335-449 for 46″ cut, replaces star centre hole, outside blades for 600 & 800 series built since 1997.
360-609 see above 16-1/4 6 pointstar (5/8)
none none 2-1/2 .187
(2) 360-609 and (1) 360-607 for 46″ cut, Shark Tooth Mulching Blade.
335-525 742-0542753-0571942-0542
16-1/4 6 pointstar (11/16)
5/16 2-1/2 3 .125
(2) 335-525 & (1) 335-533 for 46” cut, replaces star centre hole, Outside blades for 600 & 800 series, 1996 & earlier, held on with bolt.
335-452 742-0611942-0611 / A
16-1/4 6 pointstar (5/8)
3/8 2-1/2 2-1/2 .150
(2) 335-452 and (1) 335-453 for 46″ cut - star centre hole. Outside blade, 3 in 1 mulching blade, 1999 & after. Fits auto drive step through tractors.
325-885 742-04125942-04125
16-1/4 6 pointstar (5/8)
3/8 2-1/2 2-1/2 .203
742-04043(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades.Fits LT1046 and i1046 series mowers. For star hole replacement blade.
360-609 see above 16-1/4 6 pointstar (5/8)
none none 2-1/2 .187
(2) 360-609 and (1) 360-607 for 46″ cut, Shark Tooth Mulching Blade.
MTD continued - also see CUB CADET
09-02
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-554 742-0120 / B942-0120 / B
17-1/4 3/8 5/16 2-1/2 2 .150
(2) for 34″ cut, For side discharge models 440, 445, 455, 460, 465, 466, 470, 472, 475, 480, 485, 488, 620, 621, 752, 138-460A, 138-462A, 138-465A and W7-BG-262B.
335-451 742-0623942-0623
17-1/4 6 pointstar (5/8)
5/16 2-1/2 2-1/2 .187
(3) for 50″ cut, star centre hole. Mulching blade for deep deck riding mowers, 1998 and after.
325-500 742-05052A942-05052A
17-1/4 6 pointstar (5/8)
3/8 3 2-1/2 .150
(3) for 50” cut, star centre hole. Mulching blade / 2-in-1 blade. Side discharges and mulches. Fits 50” Lawn Tractor and RZT Mowers, 2015 and after. Also fi ts Massey Ferguson MF50-22ZT, Rover RZT-50.
325-510 742-04053 742-04053A 742-04053B
17-7/8 6 pointstar (5/8)
none none 2-1/2 .150
942-04053 / 942-04053C(3) for 50” cut - Standard Duty blade. Fits 50” cut models: LT1050 and RZT50 series.
325-507 742-04053A742-04053B 742-04053C
17-7/8 6 pointstar (5/8)
none none 2-1/2 .187
942-04053A / 942-04053B / 942-04053C / 742-04053C0637(3) for 50” cut - Heavy Duty blade. Fits CUB models: RZT50, RZT50, 13AF91AP010, 13AP11CP709, 13AP11CP710, 13AP11CP756, 13AP91AP010, 13AP91AP056, 13AQ11BP010, 13AQ11BP710, 13AQ11BP756, 13AQ11CP009, 13AQ11CP010, 13AQ11CP056, 13AQ11CP256, 13AQ11CP709, 13AQ11CP710, 13AQ11CP712, 13AQ91AP010, 13AQ92AP; Fits MTD models: RZT-50, 13AA625P004, 13AA625P004, 13AA625P304, 13AA625P372, 13AA625P719, 13AA925P004, 13AP615P755, 13AP925P004, 13AR91PP099, 13AR91PP099, 13AU615P755, 17AC2ACG055, 17AE2ACG004, 17AF2ACP001, 17AF2ACP004, 17AF2ACP004, 19A70000.
325-511 742-04056742-04056A
17-7/8 6 pointstar (5/8)
3/8 3 2-1/2 .149
742-04056A-0637742-04056B / 742-04056C / 942-04056 / 942-04056A
(3) for 50” cut - Super High Lift blade. Found on Cub Cadet and Toro models with 50” cut decks.
360-076 see above 17-7/8 6 pointstar (5/8)
none none 2-1/2” .187
(3) for 50” cut, Shark Tooth Mulching blade.
335-562 742-0121 / B942-0121 / B
18 3/8 5/16 2-1/2 2 .150
(2) for 36” cut and 18” cut push mowers with side discharge. (While Quantities Last)
335-448 742-0738942-0738
18 15/16 X11/16
5/16 2-1/2 2-1/4 .134
Fits 18″ walk behinds. Mulching blade for MTD deck 1995 and older. Fits bowtie centre hole
335-446 742-0743942-0743
18 15/16X 11/16
5/16 2-1/2 1-3/4 .125
Fits 18″ walk behinds. Mulching blade for MTD battery operated walk behinds. FITS MTD BOW TIE HUB (W.Q.L.)
MTD Six Star Spindle.We are stocking two types of replacement
blades for the “MTD Six Star Spindles”.Both the “Y” and “H” (double diamond) hole patterns will fi t securely onto the MTD 6 point star spindles.
MTD continued - also see CUB CADET
09-03
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-170 742-0496942-0496
18-3/16 13/32 5/16 2-1/2 3 .150
(2) for 36″ cut. High lift blade for deep deck models 1989 and after.
335-475 742-0677 742-0677A / B
18-1/2 6 pointstar (5/8)
5/16 2-1/2 3 .204
942-0677A / B(3) for 54” cut. Fits CUB CADET models: GTX1054, GT1054, GT1554, GT1554VT, 13AK11BK009, 13AK11BK010, 13AK92AK010, 13VR92AK009, 13WK92AK009, 13WK92AK010, 13WK92AK056, 13WR92AK010, 13WZ92AK010, 13YZ92AK010, 13YZ92AK056, 14AK13BK009, 14AK13BK010, 14AK13BK056, 14AK13BK256, 14AK13CK010, 14AK94AK010; Fits MTD models: 14AP805K730, 14AR808K131, 14AR808K131, 14AR814K401, 14AZ814K401, 14AZ814K401, 14AZ814K701; Fits TORO models: GT2300, 14AK81RK544, 14AK81RK544, 14AK81RK744, 14AK81RK744; Fits TROY BILT models: KT740-3011, 17ARCACK011. (Replaces MTD / Troy Bilt #’s 742-0678 / 942-0678. (Note: You need to order 3 blades to make a set). (Found on MTD rider model# 14AA945K004).
360-608 see above 18-1/2″ 6 pointstar (5/8)
5/16 2-1/2″ 3 .203
(3) for 54″ cut. Shark Tooth Mulching Blade. Fits 1500 Tractors and RZT’s with 54” decks.
325-501 742-05056742-05056A942-05056A
18-5/8 6 pointstar (5/8)
3/8 3 2-1/2 .150
(3) for 54” cut, star centre hole. Mulching blade / 2-in-1 blade. Blade for 54” Cub Cadet Fabricated Deck RZT. Fits 2013-Up Cub Cadet RZT 54” Zero Turn Mowers and 2015-Up Cub Cadet XT1-2 series tractors with 54” Deck.
335-570 742-0122942-0122
19 3/8 5/16 2-1/2 2 .150
(2) for 38″ cut. For side discharge models 476, 487, 490, 493, 494, 495, 496, 497,497F, 497P, 498, 628, 698, 720, 760, 765, S/D, 138-495A, 138-497A and W7-BG-497, etc.
335-447 742-0739 942-0739
19 Bow Tie 5/16 2-1/2 2-1/4 .125
Fits 19” walk behinds. Fits bowtie centre hole. Fits CUB CADET models: CC189, CC500 and CC550ES, and CC550SP, 19” walk behind and MTD / YARDMAN 19” walk behind; 11A-18M9002 (2010 and 2011), 11A-18MZ202 (2010 and 2011), 12A-18M7002 (2010 and 2011) and 12AE-18JA002 (2010 and 2011).
335-430 742-0675942-0675
19-1/4 6 pointstar (5/8)
5/16 2-1/2 2-1/4 .164
742-04084 / 942-04084 / 742-0675-637 / 942-0675-637(2) for 38” cut, with star center hole, low lift blade. Fits 38” cut Cub Cadet / MTD 700 series mowers.
335-610 742-0610942-0610
19-5/16 6 pointstar (5/8)
none none 3 .149
(2) for 38” cut, with star center hole. Fits MTD models: CLT38G 13A277KF897, LT3812, LT3812 13BC77KF897, LT538G 13AC77GF897,LT542H 13AN79GS897, 13AA472F190 L-13, 13AA662F190 LT-13, 13AA672F190 LT-13, 13AA673F190 LT-13, 13AA683F190 LT-1300, 13AC76GF897, 13AC76LF031, 13AC76LF055, 13AC76LF058, 13AC762F000, 13AC762.
335-549 742-0610942-0610
19-5/16 6 pointstar (5/8)
none none 2-3/4 .149
(2) for 38” cut, star center hole, 3 in 1 mulching blade, deep deck - 1992 and after. (Found on MTD rider model# 13AC762F000, 13AC762F065, 13AC76LF031, 13AC76LF055).
360-610 see above 19-5/16 6 pointstar (5/8)
5/16 2-1/2 2-3/4 .149
(2) for 38″ cut, Shark Tooth mulching blade.
MTD continued - also see CUB CADET
09-04
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-877 742-0473A942-0473A
19-3/8 13/32 5/16 2-1/2 3 .149
742-0322 / 742-0472 / 742-0493 / 942-0493(2) for 38” cut. Fits MTD models: Lawn Groom Mdl 130-650F133, MTD Mdl 130-452F134/485-209, MTD Mdl 130-650F136/403436, 111-508R013, 130-432-000, 130-432E016, 130-433-000, 130-434-000, 130-435-000, 130-436-000, 130-437-000, 130-438-000, 130-439-000, 130-440-000, 130-441-000, 130-442-000.
335-493 742-0493942-0493
19-3/8 13/32 5/16 2-1/2 3 .149
(2) for 38″ cut, sand blade, deep deck - 1986 thru 1996.
335-790 742-0537942-0537
19-3/8 13/32 7/16 2-1/2 3 .149
(2) 335-790 and (2) 335-798 for 38″ cut, Mulching blade, side discharge, deep deck - 1992 and after.Fits MTD models: 134D694G401, 134E660F301, 134E661F000, 134E661F147, 134E667F302, 134G660G119, 134G660G302, 134G660G352, 134G670G000, 134G670G009, 134G670G147, 134G690G088, 134H607F205, 134H660F000, 134H660F134, 134H667F372, 134H670F016, 134I600F000, 134I660F054, 134I665F3
335-745 742-0220942-0220
20 3/4 3/8 2-1/2 2 .150
20″ cut used with models with blade brake clutch, 1984 thru 1986. (While Quantities Last)
335-943 742-0520 742-0620
20 13/16 (.822)
3/8 2-1/2 2 .150
942-0520 / 942-062020″ cut walk behind zone start models - 1984 thru 1986.
335-001 742-0620942-0620
20 13/16 (.822)
3/8 2-1/2 2-1/4 .134
20″ cut, mulching blade for walk behind mowers with splined shaft.
335-010 742-0500 942-0500
20 13/16 (.822)
3/8 2-1/2 2-1/4 .125
942-072020″ cut, mulching blade for 090 series mowers, 1996 and before. (While Quantities Last)
335-720 742-0500 742-0720
20 13/16 (.822)
3/8 2-1/2 2-1/4 .134
942-0500 / 942-072020″ cut, mulching blade for walk behind mowers w/ splined shaft - 1993 & after, models 070, 080, 090, 100, 200 & 700. (While Quantities Last)
335-439 742-0640942-0640
20 Bow Tie 5/16 2-1/2 2-1/4 .125
Fits 20” walk behinds. High lift blade for walk behind mowers, 1997 and older. Fits bowtie centre hole.Fits MTD models: 08P502-0055-F1, 1T65NU, 11A-AOS5706, 11A-A1S5706, 11A-02BT706, 11A-02BT706, 11A-02JV000, 11A-02JV006, 11A-02JX700, 11A-02JX706, 11A-02MG000, 11A-02MG029, 11A-02SB700, 11A-02SB706, 11A-02SB706, 11A-020B000, 11A-020B000 SD-30, 11A-020B006, 11A-020B029, 11A-0
335-438 742-0740 942-0740
20 Bow Tie 5/16 2-1/2 2-1/4 .125
Fits 20″ walk behinds. Mulching blade for walk behind mowers, 1997 and older. Fits bowtie centre hole.Fits MTD models: 11A-072A000, 11A-072A022, 11A-072A132, 11A-074A141, 11A-104B090, 11A-104K290, 11A-105A790 W-105, 11A-105D790, 11A-106F190 LC-106, 11A-109Q597, 11A-109Q897, 11A-702A190 LC-40, 11A-704A190 LC-40, 11B-106F190 LC-106, 11B-108C190 LC-106, 11B-109B190 LC-106, 11.
MTD continued - also see CUB CADET
09-05
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-608 742-0608942-0608942-0608C
20-23/64 27/64 21/64 2-1/2 2 .150
(1) 335-608 and (1) 335-607 for 42″ cut decks. Left hand cut blade. Fits MTD model: 135O765N013
335-607 742-0607942-0607942-0607C
20-23/64 27/64 21/64 2-1/2 2 .150
(1) 335-607 and (1) 335-608 for 42″ cut decks. Right hand cut. Fits MTD model: 135O765N013
335-002 742-0521 742-0621
20-15/16 13/16 (.822)
3/8 2-1/2 2-1/4 .134
942-0521 / 942-0621Fits 21″ cut, rear bagger models 312R, 313R, 315R, 488, 828 and 848 with splined shaft.
335-814 742-0563942-0563
20-15/16 13/16 (.822)
3/8 2-1/2 2-1/4 .125
742-0721 / 942-072121″ cut, mulching blade, walk behind mower, models 312R, 313R, 315R, 488, 828, 848, 100,400,500,800, 1993 & after.
335-596 742-0124 942-0124B
21 3/8 5/16 2-1/2 2 .150
21″ cut, side discharge, fi ts models 118-620A, W7-BG620-B, 128-290A self propelled, W7-BG-290 SP-B self propelled. (While Quantities Last)
335-935 742-0306A 742-0490 742-0521
21 13/16 (.822)
3/8 2-1/2 2-1/2 .187
742-0621A / 942-0306 / 942-0621A21″ cut, self propelled, fi ts models 816R, 818R and 462R thru 479R, rear bagger.
335-450 742-0641942-0641
21 Bow Tie 5/16 2-1/2 2-1/4 .134
Fits 21″ walk behinds. High lift balde for MTD deck 1997 and newer. Fits bowtie centre hole. (4 point star)Fits MTD models: 11A-41K3001, 11A-414A020, 11A-414A065, 11A-414E000, 11A-414E029,11A-414R229, 11A-414S220. 11A-414S265, 11A-42K6095, 11A-422Q713, 11A-439Q597, 11A-549Q597, 11A-549Q897
335-741 742-0741 942-0741
21 Bow Tie 5/16 2-1/2 2-1/4 .134
Fits 21” walk behinds. Mulching blade for MTD deck 1995 and newer. Fits bowtie centre hole. (4 point star). (Found on MTD push mower model#s 11A-414A020, -414A065, -414E000, -414E029, -41M9001, -436A004, -544A000, -544A020-544A059, -544F004, -54M7001, -54M7031, -A18M055, -A24T055, -A26M011, -B16M029, -B29Q711 and Self Propelled mower model#s 12A-464T020-A26M011, 12AE46JA001, 12AEA29L011, 12AG469D059, 12AI832Q711, 12AI869F011, 12AV566A004, 12AV566A059, 12AV56K3095, 12AVA29Q711, 12AVB26M011).
360-105 see above 21 Bow Tie 5/16 2-1/2 3 .149
Fits 21” walk behinds. Shark Tooth Mulching blade. Fits bowtie centre hole. (4 point star). For MTD deck 1995 and newer.
335-432 742-0674942-0674
21-1/16 6 pointstar (5/8)
5/16 2-1/2 2-1/4 .164
742-0674-637 / 942-0674-637
(2) for 42” cut, with star center hole, low lift blade. Fits 42” cut Cub Cadet / MTD 700 series mowers.
MTD continued - also see CUB CADET
09-06
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-617 742-04308 742-04312
21-3/16 6 pointstar (5/8)
5/16 2-1/2 2-3/4 .149
742-0656 / 942-0656942-04308 / 942-04312 / 490-110-M108
(2) for 42″ cut, High Lift blade, star center hole, deep deck 1997 and after, auto drive 1999 and after.
335-621 742-04308 742-04312
21-3/16 6 pointstar (5/8)
5/16 2-1/2 2-1/4 .187
942-04308 / 942-04312(2) for 42″ cut, Heavy Duty blade, star center hole. Fits 2010 and newer MTD 42” tractor mower decks and 2010 and newer Toro LX lawn tractors with 42” mower deck. NOTE: DOES NOT FIT ON 2009 and older MTD tractor models or Toro 2009 and older LX / GT series lawn tractors. Fits MTD models: 13AJ775S000, 13AN772S000, 13AX771S004, 13AX771S004, 13AX795S004, 17AFSACS004; Fits TROY BILT models: 13AN77KS011, 13AX78KS011, 13AX78KS066, 13WN77KS011, 13WX78KS011, 13WX78KS211, 17BDCACK066; Fits YARDMAN models: 13AN795S001, 13AO772S055.
335-616 742-0616942-0616
21-3/16 6 pointstar (5/8)
none none 3 .149
742-04087 / 942-04087(2) for 42″ cut, star centre hole.Fits MTD models: 13AD604G401, 13AD624G401, 13AD674G401, 13AD678G034, 13AD678G300, 13AD698G205, 13AF607G352, 13AF608G062, 13AF660G352, 13AF673G000, 13AF675G062, 13AF678G205, 13AF693G118, 13AF698G300, 13AG619H022, 13AG675G033, 13AG675G196, 13AG675G733, 13AG678G022, 13AG678G7; Fits MURRAY models: 13AM775S058, 13BM772S058, 31R707-0013-G1; Fits TORO models: 13BX60RG744; Fits TROY BILT models: KT725-3012, SV530-3222, 13AM77KS011, 13AV60KG011, 13WV78KS011, 17ARCACS011, 31R707-0001-G1 and Fits YARDMAN models: 13A2785S001, 4P90JUB.
335-551 742-0616 942-0616
21-3/16 6 pointstar (5/8)
none none 2-3/4 .149
742-0616A / 942-0616A490-110-M115
(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after. Fits MTD models: 13AD604G401, 13AD624G401, 13AD674G401, 13AD678G034, 13AD678G300, 13AD698G205, 13AF607G352, 13AF608G062, 13AF660G352, 13AF673G000, 13AF675G062, 13AF678G205, 13AF693G118, 13AF698G300, 13AG619H022, 13AG675G033, 13AG675G196, 13AG675G733, 13AG678G022, 13AG678G7. NOTE: also fi ts on newer TORO mowers using the 5 point blade hub, model 13AX60RG744.
360-616 see above 21-3/16 6 pointstar (5/8)
none none 2-1/2 .187
(2) for 42″ cut. Shark Tooth mulching blade.
335-503 742-0503942-0503
21-3/16 13/32 5/16 2-1/2 3 .164
(2) for 42″ cut, sand blade
335-067 742-0499 742-0499A
21-3/16 13/32 5/16 2-1/2 3 .149
742-0499A / 942-0499 / 942-0499A(2) for 42″ cut, side discharge deep deck models - 1990 and after.Fits MTD models: Agway Mdl 130-689G019/822-245, Central Park Mdl 131-660G046, Central Park Mdl 131-670G046, Hechinger Mdl 130-673G372/06-426944, Hechinger Mdl 131-660G372/06-449631, Hechinger Mdl 131-689G372/06-449714, Husky Mdl 130-659G131/44-20113, Lawn Hawk Mdl 130-650G
360-622 see above 21-3/16 13/32 5/16 2-1/2 3 .164
(2) for 42″ cut, Shark Tooth mulching blade.
335-782 742-0538942-0538
21-3/16 13/32 7/16 2-1/2 3 .149
(2) 335-782 and (2) 335-798 for 42″ cut, high lift for bagging - 1992 and after. (Cross blades on page 09 - 01)
MTD continued - also see CUB CADET
09-07
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-737 742-0295942-0295
22 13/32 5/16 2-1/2 2 .187
(2) 335-737 and (1) 335-729 for 44″ cut - side discharge - 700, 800 series, found on WHITE & YARDMAN tractors.Fits MTD models: Greenbrier Mdl 704, Lawnfl ite Mdl 704-132, Lawnfl ite Mdl 704-327, Lawnfl ite Mdl 714-132, Lawnfl ite Mdl 714-192, Power Tech Mdl 714, Ranch King Mdl 704, 135-704-000, 135-704-009, 135-704-033, 135-704-049, 135-704-190 44” Lawn Tractor LT-140, 135-705-000, 13
335-642 742-0642 / A942-0642 / A
22 15/16 X11/16
5/16 2-1/2 2-1/4 .134
22" cut walk behinds mowers after 1995. Fits bowtie centre hole.Fits MTD models: 11A-030E000, 11A-030F200, 11A-034E000, 11A-034R200, 11A-074E065, 11A-074R265, 11A-08MA029, 11A-08MB000, 11A-08MB006, 11A-08MB031, 11A-08M9006, 11A-084D000, 11A-084E000, 11A-084E020, 11A-084E029, 11A-084R220, 11A-084R229, 11A-422Q713, 11A-504B090, 11A-504K2
335-742 742-0742 942-0742
22 Bow Tie 5/16 2-1/2 2-1/4 .134
22” cut walk behinds. Mulching blade for walk behind mowers. Fits bowtie centre hole.Fits MTD models: 11A-08JC006, 11A-08JC031, 11A-08MB006, 11A-08M9006, 11A-084D000, 11A-084E000, 11A-084E020, 11A-084E029, 11A-084R220, 11A-084R229, 11A-50JC006, 11A-50MB000, 11A-50MB006, 11A-50MB031, 11A-50M9006, 11A-504A597, 11A-504A897, 11A-504B090, 11A-504C000, 11A-504E0 and Self Propelled mower model#s 12A-264A000, 12A-26JC006, 12A-26JC031.
335-497 742-0222942-0222
22 3/4 3/8 2-1/2 2 .150
22″ cut, used on models with blade brake clutch, 1984 thru 1986. (While Quantities Last)
335-950 742-0522742-0622
22 13/16 (.822)
3/8 2-1/2 2 .150
942-0522 / 942-062222″ cut, self propelled mowers with splined shaft.
335-722 742-0722 942-0722
22 13/16 (.822)
3/8 2-1/2 2-1/4 .125
22″ cut, mulching blade for mowers with splined shaft, models 050, 060, 070, 080, 200, 500 - 1993 and after.
335-618 742-04217942-04217
22 6 pointstar (5/8)
none none 3.15 .149
(2) for 42” cut, High Lift blade. 2 in 1 blade for side discharge and bagging.Fits Cub Cadet RZT models: RZT42 with 42” timing deck, 2009 and newer.)
335-470 742-04244 / A742-04290
23-1/4 6 point star (5/8)
none none 3 .149
942-04244942-04244-X / 942-04290
(2) for 46” cut deck on Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Models: LTX1045, LTX1046, LTX1046VT and LTX1146. (Found on MTD rider model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004).
335-468 742-04290942-04290
23-1/4 6 pointstar (5/8)
none none 2-1/2 .187
490-110-C131(2) for 46” cut deck. Heavy Duty blade.For MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Found on model: 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004.
MTD continued - also see CUB CADET
09-08
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
MTD continued - also see CUB CADET335-467 942-04244
942-04244A23-1/4 6 point
star (5/8)none none 3-1/8 .149
(2) for 46” cut deck. Super High Lift blade.For MTD series 100, LTX1045, LTX1046, LTX1046VT and LTX1146. lawn tractors with 46” cut decks, 2009 and after.Found on model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004.
360-107 see above742-04361
23-1/4 6 point star (5/8)
none none 3 .149
742-04361942-04361 / 942-04361-0684
(2) for 46” cut, Shark Tooth Mulching blade. For deck on Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Models: LTX1045, LTX1046, LTX1046VT and LTX1146. (Found on MTD rider model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004).
335-472 742-0760942-0760
24 6 point star (5/8)
5/16 2-1/2 2-1/4 .125
Fits Mini Rider 24” with 60cm Deck.Found on MTD models: 13A4065-382, 13A4065-121, 13A4065-205, 13A4065-705, 13A4065-706 Lawn Tractor.
335-687 742-0132942-0132
24-7/8 3/8 5/16 2-1/2 2-1/2 .187
(2) For 46″ cut, fi ts models 360, 362, 380, 385, 404, 420, 770 and 775 etc. (While Quantities Last)
335-134 742-0156 742-0157
26 13/32 5/16 2-1/2 3 .149
742-0158 / 742-0194 / 742-0255 / 942-0194 / 942-0255AFits 26″ cut models 525, 526 and 527 etc. (While Quantities Last)
335-646 742-0256742-0193
30 3/8 5/16 2-1/2 3 .150
742-0280 / 942-0256A / 942-0193
30″ cut, side discharge models 410, 412, 790, 795, 796, 796, 797, 138-796A, 138-797A and W7-BG796-B - 1990 & after.
335-454 742-0609942-0609942-04058
30 6 point star
21/64 2-1/2 2-3/4 .160
30” cut. Fits MTD side discharge deck, riding mowers 1990 and after. Fits MTD models: 13AL450C000 and 13AL450C700.
MURRAY335-786 024338
024458 15-1/32 7/8 X 1 none none 2-1/4 .150
025119 / 23209HT / 24338E701 24458E701 / 24458HT / 4244588 / 424458S
(3) for 42″ cut, embossed stiff eners, 1976 thru 1980 - 42″ cut, 1984 thru 1990 - 42″ cut. (Uses 405-217 or 400-217 blade adapters)
335-038 92117 92117E70192117E7D 92117E701MA
15-3/4 27/32 (.850)
none none 2-1/4 .134
(3) for 46″ cut, High lift blade - newer models 46901X92A, 1991 thru 1998 all decks.
335-012 92117 92117E701
15-3/4 27/32 (.850)
none none 2-1/4 .187
(3) for 46″ cut, Heavy duty / High lift blade - 1991 thru 1998 all decks
09-09
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-040 65663156631E701
15-3/4 27/32 (.850)
none none 2-1/4 .134
056631E701 /056631E701MA(3) for 46″ cut, Mulching blade - for GT rail frame models, also used on Scotts mower, 3 in 1 blade.
360-700 see above 15-3/4 27/32 (.850)
none none 2-1/4 .187
(3) for 46″ cut, Shark Tooth mulching blade.
345-109 1736044AYP 16 1 3/8 2-9/16 2-1/2 .203
(1) 345-109 and (2) 345-110 for 54” cut.Found on MURRAY / SIMPLICITY / SNAPPER models: Conquest, Prestige, Legacy XL; with 20 thru 27 Hp engines.
330-030 1757303YP 16-1/2 13/16 none none 2-1/4 .149
(3) for 48” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers.Found on models: MF2500, Regent S, Regent EX, Briggs Hydro and 48 Fabricated mower decks.
335-092 94692 94692E701 094692E701
17-11/16 27/32 (.850)
none none 2-1/4 .150
94692E701MA / 94692853
(3) for 48” and 50” cut. Medium Lift blade. Fits MURRAY LT railframe; 52” rail frame; 52” GT old style.
335-115 02400 020930
18-1/4 7/8 X 1 none none 2-1/4 .149
024116 / 025116 / 054372 / 054390E701MA / 24116E601 / 24116HT / 429305 / 54372E / 54372HT / 54390HT / 54390E701
(2) for 36” cut, High Lift blade, Takes (2) 335-115 and (2) 335-141 (cross blades - W.Q.L.) for 36” cut.
335-810 20930 20930HT 20930E701
18-1/4 7/8 X 1 none none 2-1/4 .149
454390 / 454390MA / 420930 / 54390E701(2) for 36” cut. Fits MURRAY All 36” cut riders with square D center hole. Lawn tractor models 1976 thru 1988.
360-715 see above 18-1/4 7/8 X 1 none none 2-1/4 .187
(2) for 36″ cut, Shark Tooth mulching blade. (While Quantities Last)
335-830 880638YP880638BZYP
19 13/32 13/32 1-7/8 2-1/8 .150
Blade for Murray.
335-121 43865 43865E701 471548
19-3/8 13/32 none none 2-1/4 .134
471548MA / 71548E701MA / 71548 / 71548E701
20″ Mulching blade for models from 1990 thru 1996.
MURRAY continued
09-10
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-008 92003HT 92003E701 92003E701MA
19-1/2 27/32(.850)
none none 2-1/4 .150
(2) for 38″ cut, Sand blade - low lift.
335-182 91742HT91742E701
19-1/2 27/32(.850)
none none 2-1/4 .134
091742EMA(2) for 38″ cut, High lift blade. Fits models from 1989 thru 1996, standard duty blade
335-118 91742HT 91742E701 91742E701MA
19-1/2 27/32(.850)
none none 2-1/4 .187
(2) for 38″ cut, High lift blade, Fits models from 1989 thru 1996, Heavy duty blade
335-021 49510495104E701
19-1/2 27/32(.850)
none none 2-1/4 .134
92543E701 / 09510E701(2) for 38″ cut, Mulching blade, (3 in 1 blade), Also see our 360-712 Shark Tooth Mulcher (W.Q.L)
335-003 5625056250E701056250E701
19-1/2 27/32(.850)
none none 2-3/4 .134
056250E701MA / 56250E701MA(2) for 38″ cut, Mulching blade, 1989 thru 1998 - 3 in 1 blade.
335-760 20045 20045HT 20045E701
19-15/16 13/32 13/32 2-1/2 2-1/4 .150
42785E701MA / 442785 / 442785MA / 42785HT / 42785E7015548MA / 774004
20” cut. Fits MURRAY - Most 20” walk behind decks (1996 and newer).
335-022 672763672763E701671921E701
20 3/8 none none 2-1/4 .150
Fits 20” cut walk-behind mowers. Mulching blade, 3 in 1 blade.
335-024 095103E701 56251E701 92544E701
20-5/16 27/32(.850)
none none 2-1/4 .134
95103853 / 95103E701 (2) for 40″ cut, Mulching blade, 3 in 1 blade
360-719 see above 20-5/16 27/32(.850)
none none 2-1/2 .187
(2) for 40″ cut, Shark Tooth Mulching Blade (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2).
335-030 9200292002HT
20-3/8 27/32(.850)
none none 2-1/4 .150
92002E701 / 092002E701MA(2) for 40″ cut, Sand blade - low lift blade
335-104 456251 56251 56251E701
20-3/8 27/32(.850)
none none 2-3/4 .134
56251E701MA / 056251E701MA(2) for 40” cut, Mulching blade, 1989 thru 1998, 3 in 1 blade.
MURRAY continued
09-11
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-166 91871 91871HT91871E701
20-3/8 27/32(.850)
none none 2-1/4 .134
091871E701MA(2) for 40″ cut, High lift blade for bagging. Models 40603, 40604, 40606, 40620, 40622, 1989 thru 1998.
335-016 91871 91871HT 91871853
20-3/8 27/32(.850)
none none 2-1/4 .187
91871E701 / 91871E701MA
(2) for 40″ cut, High lift blade for bagging. Heavy duty blade.
360-704 see above 20-3/8 27/32(.850)
none none 2-1/4 .187
(2) for 40″ cut, Shark Tooth mulching blade. (While Quantities Last)
345-110 1736043AYP 20-9/16 1 3/8 2-9/16 2-1/2 .203
(2) 345-110 and (1) 345-109 for 54” cut.Found on SIMPLICITY / SNAPPER models: Conquest, Prestige, Legacy XL; with 20 thru 27 Hp engines.
335-234 7100242BZYP 20-3/4 3/8 none none 2-1/2 .149
21” Mulching blade / Wave 21” push mower. Found on Murray 7800268 (BTPV21675E), Replaces obsolete# 7100242AYP.
335-028 672029 672057E701
20-3/4 13/32 none none 2-1/4 .134
71584853 / 71584E701
21″ cut, Mulching blade for walk behind mowers, 3 in 1 blade.
335-007 4383643836E701
20-13/16 13/32 none none 2-1/4 .134
43836HT / 43610HT / 043610E701
21″ cut, walk behind models 21681X5 and 21681X62, 1990 and newer.
335-806 471161 471161MA
20-7/8 13/32 none none 2-3/4 .150
471584 / 71161E70121″ cut, Mulching blade. (While Quantities Last)
335-869 22860 22860HT
20-7/8 13/32 13/32 2-1/2 2-1/4 .150
22860E701 / 22860E701MA / 042739 / 422860
21″ cut, blade for bagging, 1983 thru 1989.
335-019 495100 7769203095100E701
21-1/4 27/32(.850)
none none 2-1/4 .134
095100E701A / 95100E701MA / 5539MA / 721392 / 7769203
(2) for 42” cut, Mulching blade, 3 in 1 blade. Fits MURRAY lawn tractors with 42” decks (1998-2008).
MURRAY continued
09-12
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-020 092419E701 095101E701 92419E701
21-1/4 27/32(.850)
none none 2-1/4 .150
95101E701 / 095101E701MA
(2) for 42″ cut.
335-162 092418E701 492418MA 92418
21-1/4 27/32(.850)
none none 2-1/4 .150
92418E701
(2) for 42″ cut, High lift blade.
335-167 492418 492418MA 492418MA
21-1/4 27/32(.850)
none none 2-1/4 .187
092418E701 / 092418E701 / 095101E701MA 09510E701 / 92418 / 92418E701 / 95101E701
(2) for 42” cut, High lift blade. Heavy duty.
335-005 456252 456252MA 56252
21-1/4 27/32(.850)
none none 2-3/4 .134
56252E701 / 656252853 / 056252E701 / 056252E701MA
(2) for 42″ cut, Mulching blade, 1992 thru 1996, 3 in 1 blade.
360-701 see above 21-1/4 27/32(.850)
none none 2-1/4 .187
(2) for 42″ cut, Shark Tooth mulching blade.
330-032 1758878BMYP 21-5/16 13/16 none none 2 .204
(2) for 42” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers. Found on Simplicity Courier Zero Turn Riders, 23 Hp with 42” Fab decks. Fits 42” Fabricated Deck, 360Z Model No. 2691317.
360-914 17592621759262BMYP
21-5/16 13/16 none none 2-1/2 .204
(2) for 42” cut, Shark Tooth mulching blade. Fits Snapper 42” Fabricated Deck, 360Z Model No. 2691317.
335-068 1101823 1101823E701
21-5/8 13/32 13/32 1-7/8 2 .135
7100851 / 1101823E701MA / MU1101823E701MAFits Murray push mowers. 3 in 1 blade.
335-111 20046 20046HT20046E701
21-7/8 13/32 13/32 2-1/2 2-1/4 .150
42225HT / 4225E701MA / 42225 / 42225E70122″ cut, High lift blade.
335-236 7103288YP 22 3/8 13/32 2-1/2 2-1/2 .150
22” Mulching blade for Murray / Snapper push mowers. Found on many Murray / Brute 22” Lawn Mower models.
MURRAY continued
09-13
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-499 1101120E701 672059E701
22 13/32 none none 2-1/4 .149
672735 / 672735E701 / 7111371113E701 / 71499 / 71499E701 / 71584E701 / 71849E701
22″ cut, Mulching blade for walk behind mowers, 3 in 1 blade.
335-116 5405354053E701MA
30 7/8 X 1 none none 2-1/4 .150
24868E701 / 25625 / 54053E701
30″ cut, High lift blade for bagging. (Uses our 405-217 or 400-217 blade adapter) (While Quantities Last)
335-004 56061E701 56061E701MA 56061HT
30 7/8 X 1 none none 2-3/4 .160
30″ cut, High lift blade for bagging. (Uses our 405-217 or 400-217 blade adapter) (While Quantities Last)
335-135 002405 55793HT
30 27/32(.850)
none none 2-1/4 .187
55454HT / 55793E701
30″ cut, Low lift blade.
335-330 5621255969HT56060HT
30 27/32(.850)
none none 2-3/4 .160
56060E701 / 55969E701 / 55969E701MA56212E701 / 56246E701 / 56246E701MA
30″ cut, High lift blade for bagging
335-215 5553MA 5621056217
30 27/32(.850)
none none 2-3/4 .150
56217E701 / 056217E701 / 056217E701MA 30″ cut, Mulching blade. Fits rear engine riders models 2466A and 24661A. 1987 to present, 3 in 1 blade.
360-707 see above 30 27/32(.850)
none none 2-1/2 .187
30″ cut, Shark Tooth mulching blade. (While Quantities Last).
NEW HOLLAND - see FORD & HOMELITE / JACOBSENNOMA - AMF / Canadiana / Dynamark
305-680 9248300323
9-5/8 3/8 none none 2 .134
782972 / 00782972
(1) 305-680 and (2) 305-649 for 45″ cut, high lift.
305-623 317071 309573
16-1/8 3/8 none none 2 .134
302329 / 309571 / 317071 / 327557
(2) for 32” cut. (3) for 46” cut, High Lift blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (W.Q.L)
MURRAY continued
09-14
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
305-524 868556821
18-1/8 3/8 none none 2 .140
54884 / 39311 / 782965 / 00782965
(2) for 36″ cut, low lift blade.
305-649 58212306931
18-1/8 3/8 none none 2 .134
(2) for 36″ cut, High Lift blade or (2) 305-649 and (1) 305-680 for 45″ cut.
305-599 57299309069
19-11/16 3/8 none none 2 .134
76860 / 031039
(2) for 39″ cut, Low lift blade, found on Lawn Chief tractors.
305-631 58190306932
19-11/16 3/8 none none 2 .134
(2) for 39″ cut, Super High Lift blade, found on Lawn Chief tractors.NOTE: For Mulching blade see our 305-633 W.Q.L. on-line, replaces Noma# 330425, 326160 and 76660.
305-277 330277 20-1/4 3/8 none none 2 .187
20″ cut, Mulching blade for K-Mart models. (While Quantities Last)
305-708 309070303065
20-5/16 3/8 none none 2 .134
(2) for 40” cut, Super High Lift blade. Fits models A4016-030. NOTE: Will replace Noma / Canadian / Dymamark blade number 313316 - if the mower deck is equipped with the newer style quill / spindle assemblies that have the cut outs in the saddle to allow for our 305-708 blade.
305-023 330278325762
21-5/8 3/8 none none 2 .187
(2) for 43″ cut, Mulching blade, 3 in 1 blade. (While Quantities Last)
305-700 31660831395413954
21-3/4 3/8 none none 2 .134
(2) for 42″ and 43″ cut, High Lift blade.
305-468 325751 29-7/8 1/2 28/64X
15/16
2-11/16 2-3/4 .187
30″ cut
POULAN PRO / JONSEREDS - see HUSQVARNA & AYPPOWER KING - see ECONOMY / POWER KINGPRO STAR - see DIXIE CHOPPER
NOMA - AMF / Canadiana / Dynamark continued
09-15
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
315-800 522360 23 1 9/16 6-1/2 2-1/2 .312
(3) for 65” cut, High Lift blade. Fits PROGRESSIVE TURF model: SDR-65. Note: Replaces Progressive Turf # 522360
315-801 522364 24 1 9/16 6-1/2 2-1/2 .312
(4) for 90” cut, High Lift blade. Fits PROGRESSIVE TURF model: SDR-90. Note: Replaces Progressive Turf# 522364
315-803 522376 32 1 9/16 10 2-1/2 .312
High Lift / Heavy Duty blade.
RANSOMES - see BOBCAT / RANSOMESROPER - see AYP - Roper / SearsSCAG
340-109 48110481706
16-1/2 5/8 none none 2-1/2 .203
A48110(2) for 32″ cut or (3) for 48″ cut
340-100 48110481706
16-1/2 5/8 none none 2-1/2 .240
482461 / 482877 / A48110(2) for 32” cut, (3) for 48” cut mid size mowers. Heavy Duty Blade - Standard Lift.
340-113 48184481710A48184
16-1/2 5/8 none none 3 .204
(2) for 32″ cut or (3) for 48″ cut, High lift blade.
360-917 see above 16-1/2 5/8 none none 2-1/2 .204
(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.
340-158 48108481707A48108
18 5/8 none none 2-1/2 .203
(2) for 36″ cut or (3) for 52″ cut.
340-633 482462 18 5/8 none none 2-1/2 .203
(2) for 36″ cut High lift blade, (after 2000). (While Quantities Last).
340-121 481711 48185
18 5/8 none none 3 .203
482467 / A48185(2) for 36″ cut or (3) for 52″ cut, High lift blade.
360-918 see above 18 5/8 none none 2-1/2 .204
(2) for 36” cut or (3) for 52” cut. Shark Tooth Mulching blade.
PROGRESSIVE TURF
09-16
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
360-029 482235 482724
18 5/8 none none 2-1/2 .204
482961 / 483317
(2) for 36″ cut or (3) for 52″ cut, Shark Tooth Mulching Blade.
340-174 48109A48109482129
20 5/8 none none 2-1/2 .204
(2) for 40” cut and (3) for 60” cut.
310-078 48111A48111481708
21 5/8 1/4 1-5/8 2-1/2 .250
(3) for 61″ cut, Heavy Duty Blade.
340-628 48304 482879 A48304 / 481712
21 5/8 none none 3 .204
(3) for 61″ cut, High lift blade.
340-626 A4811148111
21 5/8 none none 2-1/2 .203
(3) for 61” cut.
360-921 see above 21 5/8 none none 2-1/2 .203
(3) for 61″ cut, Shark Tooth mulching blade.
360-920 see above 21 5/8 none none 3 .250
(3) for 61” cut. Heavy duty, Shark Tooth Mulching Blade.
340-129 4811248113481709
24-1/2 5/8 none none 2-1/2 .203
(3) for 72″ cut. For an H.D. blade see our 345-434 under the “Woods” heading.
360-995 481701481709
24-9/16 5/8 none none 3 .250
(3) for 72” cut, Shark Tooth Mulching Blade. Fits many commercial series mowers.
SCOTTS (Home Depot brand name) also see John Deere & Murray335-040 56631E701 15-3/4 27/32
(.850)none none 2-1/4 .134
(3) for 46″ cut GT rail frame, Mulching blade - models made by Murray
360-700 65663192117E701
15-3/4 27/32(.850)
none none 2-1/4 .187
(3) for 46″ cut, Shark Tooth mulching blade.
SCAG continued
09-17
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
330-448 M127466 16 11/16 none none 2-1/2 .203
(3) for 46″ cut, lawn tractors S2046 and 2546 (1999 thru 2001) models - made by John Deere
360-492 see above 16 11/16 none none 2-1/2 .203
(3) for 46″ cut, Shark Tooth mulching blade.
330-447 M135589 16-5/8 3/4 none none 2-1/2 .203
(3) for 48” cut yard tractors, High lift blade for bagging. Fits John Deere lawn and garden tractors; also used on Scotts model S2048 yard tractor.
330-383 M113517 16-5/8 13/16 none none 2-1/2 .204
(3) for 48” cut, Mulching blade. Used on SCOTTS lawn and garden tractors S2048 and S2348 (1999 thru 2001) series.
330-373 M115495 16-5/8 13/16 none none 2-1/2 .204
(3) for 48” cut, new style. Used on SCOTTS lawn and garden tractors S2048 and S2348 (1999 thru 2001) series.
360-432 see above 16-5/8 13/16 none none 2-1/2 .203
(3) for 48″ cut, Shark Tooth mulching blade.
335-092 094692E701 94692 94692E701
17-11/16 27/32(.850)
none none 2-1/4 .150
94692E701MA(3) for 48” and 50” cut. Medium Lift blade. Fits SCOTTS models 48560X9Z, 50563X8, 52370X92.
330-365 M115496 18-5/8 13/16 none none 2-1/2 .204
(3) for 54″ cut, new style, models made by John Deere.
360-406 see above 18-5/8 13/16 none none 3 .204
(3) for 54″ cut, Shark Tooth mulching blade.
335-019 495100 095100E701 095100E701A
21-1/4 27/32(.850)
none none 2-1/4 .134
5539MA / 721392 / 7769203
(2) for 42” cut, Mulching blade, 3 in 1 blade. Fits SCOTTS lawn tractors with 42” decks (1998-2008).
360-701 see above 21-1/4 27/32(.850)
none none 2-1/4 .187
(2) for 42″ cut, Shark Tooth mulching blade.
330-339 21-3/8 11/16 13/32 3-11/16 2-1/2 .164
(2) for 42” cut. Fits Scotts lawn and garden tractor models: L1742 and L17.542 (2002) series 42” and 48” decks.
SCOTTS (Home Depot brand name) also see John Deere & Murray
09-18
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
330-449 M127129 M139802
21-7/16 11/16 none none 2-1/2 .160
M145969
(2) for 42” cut, Mulching blade. Fits SCOTTS S1642 and S1742 (1999-2001) lawn & garden tractor series with 42” deck; also used on SCOTTS yard tractors.
360-405 see above 21-7/16 11/16 none none 2-1/2 .203
(2) for 42″ cut, Shark Tooth mulching blade.
360-720 672573672573E701
21-5/8 13/32 none none 2-1/4 .187
22″ cut, Mulching blade for walk behind mowers, 3 in 1 mower - made by Murray (While Quantities Last)
SEARS / CRAFTSMAN - see AYP and MURRAYSENSATION - also see GILSON and LAWN BOY
340-786 123101229904Gilson# 230904
20-3/8 3/8 3/8 2 2-1/2 .187
20″ cut.
SIMPLICITY - also see ALLIS CHALMERS 345-009 108297
202589211-9/16 1-3/8 3/8 3-1/16 2-1/2 .150
2108297 / 2108297A / 2108297AS / 2108297ASM
(3) for 32″ cut, Left hand cut blade. (Allis Chalmers# 2025892)
345-017 1085012087731
13 1-3/8 3/8 3-1/16 2-1/2 .150
2108501 / 2108501A / 2108501AS / 2108501ASM
(3) for 36″ cut, Left hand cut blade. For Broadmoor 36, (Allis Chalmers# 2087731)
345-090 1656144 1656144A
14-1/2 3/4 13/32 3-1/16 2 .150
1656144AS / 1656144ASM / 108298SM / 2025856 / 2025856SM
(3) for 42″ cut, Left hand cut blade, 7000 and 7100 series and diesel models, pre 1997.
345-074 1656147 1656147A
15-5/16 3/4 13/32 2-9/16 2 .150
1656147AS / 1656147ASM
(3) for 42” cut, Fits SIMPLICITY models: 600, 1800, 5000, 6000 also Sunrunner FC and GT series.
345-106 1704856 1704856A
16-1/8 3/4 13/32 2-9/16 2 .203
1704856AS / 1704856ASM / 1704856BZ
(3) 345-106 for 44” cut or (1) 345-106 and (1) 345-102 for 38” cut. Found on both LTH and 1600 series.
SCOTTS (Home Depot brand name) also see John Deere & Murray
09-19
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-005 1704100 1704100AS
16-1/8 3/4 13/32 2-9/16 2 .203
1704100SM / 1716696A / 1716696ASM / 1727774A / 1727774BMA / 1727774SM
(3) for 44” cut. Fits SIMPLICITY LTH, 14-16 GT, 1600, 1700 series; small frame garden tractor 1989 and later.
330-030 17573031757303BM
16-1/2 13/16 none none 2-1/4 .149
1757303YP
(3) for 48” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers.Found on models: MF2500, Regent S, Regent EX, Briggs Hydro and 48 Fabricated mower decks.
345-082 108448 108448SM
16-11/16 3/4 13/32 3-1/16 2 .150
1656143 / 1656143A / 1656143AS1656143ASM / 1656143SM 210848A / 210848ASM
(3) for 48” cut, Left hand cut blade, New style mowing decks. Fits Simplicity GTH-L, 700, 900, 7000 series.
345-003 1679916 1679916SM
16-3/4 1 none none 2-1/2 .203
1679916A / 1679916ASM
(3) for 48” cut, Left hand cut. Fits SIMPLICITY GTH-L, 700, 900, 1900, 7000 series; fi ts large frame garden tractors, 1987 and later.
345-124 1656146 1656146ASM
17 3/4 3/8 2-9/16 2 .187
(3) for 48″ cut, 5200, 6100, 6200 and 6500, FC and GT series.
345-006 1708229 1708229AS
18-1/8 3/4 3/8 2-9/16 2 .203
1726357 / 1726453BZYP / 1726453BZ / 1726453A
(3) for 50” cut. For large frame tractors. Fits AYP, SIMPLICITY 14-16 GT, 1700 series
345-108 1636451 1636451SM 1657589A
18-1/2 3/4 13/32 2-9/16 2 .187
1657589ASM / 1657589SM / 1657589
(2) for 36” cut. For SNAPPER ZTR model 361 only. For Simplicity models use (1) 345-108 and (1) 345-116 for 36” cut bagger. Fits SIMPLICITY models 500, 600, 1300, 4000, 5000, RT series; 36” Sun Runner LT and RT series.
345-116 1671593 1671593SM 1671593A
18-1/2 3/4 13/32 2-9/16 2-1/2 .187
1671593ASM / 1685172 / 1685172SM
For 36” cut, Left hand side. (Use with deluxe grass catcher). (1) 345-116 and (1) 345-117 for 36” cut. Fits Dixon ZTR model 361 with bagger. For Simplicity use either (2) 345-116 for 36” cut or (1) 345-116 and (1) 345-108 for 36” cut for bagger models. For SIMPLICITY 500, 600, 1300, 4000, 5000 series; requires 2 for 36” cut.
SIMPLICITY - also see ALLIS CHALMERS continued
09-20
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-045 17372521737252A
18-1/2 .795 none none 2-1/2 .204
1737252AYP / 1737252BM1737252BMA / 1737252BZ / 1737252YP
(3) for 52” cut. Fits Simplicity / Snapper 52” Zero Turn mowers; also found on Massey Ferguson.
330-032 1758878BMYP1759262BMYP
21-5/16 13/16 none none 2 .204
(2) for 42” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers. Found on Simplicity Courier Zero Turn Riders, 23 Hp with 42” Fab decks. Fits 42” Fabricated Deck, 360Z Model No. 2691317.
360-914 17592621759262BMYP
21-5/16 13/16 none none 2-1/2 .204
(2) for 42” cut, Shark Tooth mulching blade. Fits Snapper 42” Fabricated Deck, 360Z Model No. 2691317.
345-102 1704101 1704101A
22-1/4 3/4 13/32 2-9/16 2 .203
1704101AS / 1704101ASM / 1704101SM / 1716695A / 1716695ASM
(1) 345-102 and (1) 345-106 for 38” cut. For LTH and 1600 series.
SNAPPER - also see MASSEY FERGUSON345-109 1736044AYP 16 1 3/8 2-9/16 2-1/2 .203
(1) 345-109 and (2) 345-110 for 54” cut.Found on SIMPLICITY / SNAPPER models: Conquest, Prestige, Legacy XL; with 20 thru 27 Hp engines.
335-044 1737228A 1737228BZ 1737228MA
16-1/8 .795 none none 2-1/2 .204
1737228BZYP(3) for 46” cut.Fits Snapper 46” Zero Turn mowers; also found on Simplicity, Massey Ferguson.Fits on Massey Ferguson models: 130 and 2523.
355-183 17036 76675
16-1/4 5/8 1/4 1-5/8 2-1/2 .250
77378 / 77386 / 100340 / 101366 / 5020843 / 5020843A5020843ASM / 5101986 / 5101986BMYP / 70170367017036BMYP / 7017036YP / 7077378
(2) for 32″ cut or (3) for 48″ cut, High lift blade, Heavy duty blade.
360-916 4830117017036
16-1/4 5/8 none none 2-1/2 .204
7076675 / 7077378 / 77378 / 76675 / 17036
(2) for 32″ cut or (3) for 48″ cut, Shark Tooth mulching blade.
335-120 19733 7019733
16-1/2 3/8 none none 2-3/4 .160
7019733BZ / 7019733BZYP(3) for 48” cut, For SNAPPER LT48 steel decks.
SIMPLICITY - also see ALLIS CHALMERS continued
09-21
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
330-696 1-70437017043
16-1/2 5/8 none none 2-1/2 .203
(3) for 48″ cut, Fits commercial models PMA-480, Pro Series 0 and Pro 7 Series 0, 1, 2 and 4.
360-917 see above 16-1/2 5/8 none none 2-1/2 .204
(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.
335-130 1759055YP 16-1/2 .800 none none 2 .204
(3) for 48” cut. Fits 48” 360Z Fabricated Deck Models ZT2348, 2691319-00.
330-030 17573031757303BM1757303YP
16-1/2 13/16 none none 2-1/4 .149
(3) for 48” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers.Found on models: MF2500, Regent S, Regent EX, Briggs Hydro and 48 Fabricated mower decks.
335-136 7079369 7079369YP 79369
16-15/16 1/2 none none 2-1/2 .203
(3) for 48″ cut, Low lift blade, for ZTR mowers.
335-123 7-93887079388
16-15/16 1/2 none none 2-1/2 .203
(3) for 48″ cut, High lift blade, for ZTR mowers.
360-426 see above 16-15/16 1/2 none none 2-1/2 .203
(3) for 48” cut, Shark Tooth Mulching Blade.
355-016 17037 7075751 363055
18 5/8 none none 2-1/2 .150
7075751BZYP / 7075751BZ / 76450(2) for 36″ cut or (3) for 52″ cut, Series 2 decks, Pro Series 0 and Pro 7 Series 0, 1, 2 and 4.
310-052 1-7037 7017037
18 5/8 1/4 1-5/8 2-1/2 .250
7077344 / 77344
(2) for 36″ cut or (3) for 52″ cut, Heavy duty blade, Series 2 decks, Pro Series 0 & Pro 7 Series 0, 1, 2 & 4.
315-235 292467075751
18 5/8 none none 2 .240
(2) for 36” cut, (3) for 52” cut, Heavy duty blade.
360-918 see above 18 5/8 none none 2-1/2 .203
(2) for 36” cut or (3) for 52” cut. Shark Tooth Mulching blade.
SNAPPER - also see MASSEY FERGUSON continued
09-22
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-006 1708229 1708229AS
18-1/8 3/4 3/8 2-9/16 2 .203
1726357 / 1726453BZYP / 1726453BZ / 1726453A
(3) for 50” cut. For large frame tractors. Fits AYP, SIMPLICITY 14-16 GT, 1700 series and SNAPPER LT200 series and zero turn 150Z with 50” decks.
335-045 1737252BZYP 1737252A
18-1/2 .795 none none 2-1/2 .204
1737252BM / 1737252BZ / 1737252MA
(3) for 52” cut. Fits Snapper 52” Zero Turn mowers; also found on Simplicity, Massey Ferguson.
335-197 2-4466 4-2998
19-7/16 1 none none 2-1/4 .203
7024466 / 7042998 / 7042998BZ / 7042998BZYP
(2) for 38″ cut, front engine rider models LT1438H and Black Hawk model BH120G38A.
345-110 116870171687017SM
20-9/16 1 3/8 2-9/16 2-1/2 .203
1725921ASM / 1736043 / 1736043A / 1736043AYP1736043BM / 1736043BMA /1736043BMYP /1736043BZ
(2) 345-110 and (1) 345-109 for 54” cut.Found on SIMPLICITY / SNAPPER models: Conquest, Prestige, Legacy XL; with 20 thru 27 Hp engines.
335-356 1-7002 1-9645
20-11/16 3/8 3/8 2-3/4 2-3/4 .160
1-9702 / 1-9710 / 2-6691 / 7017002 / 7019645 7019702 / 7019795 / 7019795BZ / 7026691
21″ cut, steel deck walk behind series 9.
335-240 19795 7019795
20-11/16 3/8 3/8 2-3/4 2-3/4 .160
7019795BZ / 7019795BZYP
21″ cut walk behind, (2) for 41″ tractor, Std. & BBC, punched for high lift defl ectors 335-232.
335-042 1-7168 1-7002 1-9645
20-11/16 3/8 3/8 2-3/4 2-3/4 .160
1-9702 / 1-9710 / 2-6691 / 7017168 / 7026691 / 7026691BZ / 7041939 / 7041939BZ / 7041939BZYP
21″ cut, Mulching blade - Recycler.
335-234 71002427100242AYP
20-3/4 3/8 none none 2-1/2 .149
7100242BZYP
21” Mulching blade / Wave 21” push mower. Found on Murray 7800268 (BTPV21675E), Replaces obsolete# 7100242AYP.
SNAPPER - also see MASSEY FERGUSON continued
09-23
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
320-547 7-92227-9371
21 1/2 none none 2-1/2 .250
7079222 / 7079371YP / 7079371BMYP
(3) for 61” cut, Heavy duty blade. Standard lift blade. For ZTR mowers. (For Shark Tooth version see our 360-915 under the WOODS heading).
320-548 7-9222 7079222 7079371YP
21 1/2 none none 2-1/2 .240
7079371BMYP
(3) for 61” cut, Heavy duty blade. High lift blade. For ZTR mowers. (For Shark Tooth version see our 360-915 under the WOODS heading).
310-078 48111A48111
21 5/8 1/4 1-5/8 2-1/2 .250
481708 / 17081 / 1520842 / 5020842 / 7017081 / 70757707075770BZYP / 7075770YP / 7075770BMA / 7075770BZ
(3) for 61″ cut, Heavy Duty Blade. Fits mid mount ZTR models. Used on many Commercial Pro mowers.
335-217 2-6428 7026428 7026428BZ
21 13/16 3/8 2-1/2 2-1/4 .134
7026428BZYP21” cut, Mulching blade for walk behinds. For Platinum series mowers. (While Quantities Last). Also see our 335-814
335-198 1737816BMYP 21-3/16 .798 none none 2-1/4 .170
(2) for 42″ cut. Fits Snapper ZTS 7000.
335-200 1731898 1731898A
21-3/16 .975 none none 2-1/4 .170
1731898BZ, 1731898MA / 1731898BZYP(2) for 42″ cut. Fits Snapper LT-200 series and Zero Turn 150Z series.
360-919 17318981731898A
21-3/16 .975 none none 2-1/2 .160
1731898ASM / 1731898BMA / 1731898BZ / 1731898BZYP(2) for 42” cut, Shark Tooth mulching blade.Fits Snapper LT-200 series and Zero Turn 150Z series and ZTS 7500 Craftsman.
330-032 1758878BMYP1759262BMYP
21-5/16 13/16 none none 2 .204
(2) for 42” cut. Fits BRIGGS and STRATTON / MURRAY, SIMPLICITY and SNAPPER mowers. Found on Simplicity Courier Zero Turn Riders, 23 Hp with 42” Fab decks. Fits 42” Fabricated Deck, 360Z Model No. 2691317.
360-914 17592621759262BMYP
21-5/16 13/16 none none 2-1/2 .204
(2) for 42” cut, Shark Tooth mulching blade. Fits Snapper 42” Fabricated Deck, 360Z Model No. 2691317.
335-068 7100851 7100851A
21-5/8 13/32 13/32 1-7/8 2 .135
7100851BMA / 7100851BZ / 7100851AYP
Fits 22” cut Murray, Brute Power etc push mowers. Mulching blade.
SNAPPER - also see MASSEY FERGUSON continued
09-24
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-236 7103288YP 22 3/8 13/32 2-1/2 2-1/2 .150
22” Mulching blade for Murray / Snapper push mowers.Fits 2010 and newer Snapper NXT models with 22” decks. Found on models: 7800580, 7800752,7800696, 7800782. Also fi ts 2010 and newer Snapper SPX2270 models with 22” decks. For models: 7800776, 7800707
335-398 1-9518 7019518 7019518YP
25 1-1/16 9/16 7-1/2 2-3/4 .187
25″ cut, rear engine riders, blade punched for use with our 335-422 air lifts.
335-299 1-8068 7018068
26 1-1/16 9/16 7-1/2 2-3/4 .187
7018068YP / 7018068BMYP26″ cut, rear engine rider - new style, blade punched for use with our 335-414 air lifts.
335-315 1-9515 7019515
28 1-1/16 9/16 7-1/2 2-3/4 .187
7019515BZYP28″ cut, rear engine riders - new style, blade punched for use with our 335-422 air lifts.
335-289 1-6980 7016980
28 1-1/16 9/16 7-1/2 2-3/4 .160
7016980BZ / 7016980BZYP28″ cut, Mulching blade - Recycler, for rear engine riders.
335-281 1-8038 6-0332
30 7/8 none none 2-3/4 .187
7018038 / 7060332 / 7060332YP30″ cut, rear engine riders - older style, blade punched for use with our 335-414 air lifts. (While Quantities Last)
335-307 1-8069 7018069
30 1-1/16 9/16 7-1/2 2-3/4 .187
7018069BZ / 7018069BZYP30″ cut, rear engine riders - new style, blade punched for use with our 335-414 air lifts.
360-930 see above 30 1-1/16 9/16 7-1/2 2-3/4 .187
30″ cut, Shark Tooth mulching blade for rear engine riders - new style.
335-331 1-9523 7019523 7019523BZ
33 1-1/16 9/16 7-1/2 2-3/4 .187
7019523BZYP33″ cut, rear engine riders - new style, blade punched for use with our 335-422 air lifts.
335-293 1-6982 7016982 7024741BZ
33 1-1/16 9/16 7-1/2 2-3/4 .160
7024741AYP33″ cut, Mulching blade - Recycler, for rear engine riders.
335-406 3-7751 / 3-1184 / 6-0332 / 7037751BM / 7037751BMYP / 7037751 / 7037751A
Blade holder - older mowers with single hole blades can be adapted to above blades by installing a blade holder bar. For 25”, 26”, 28”, 30” and 33” riding mowers. Length: 12-1/2”
SNAPPER - also see MASSEY FERGUSON continued
09-25
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-422 3-7723 6-0480 7060480SM
4 5/16 5/16 1-1/4 4 .120
7037723BMYP / 7037723 / 7060480Air lift set contains: (2) 3 hole defl ectors, (6) star lock washers, (6) 5/16″-24 X 21/32″ grade #5 - oval head screws and (6) hex nuts (Fits 28″ and 33″ blades).
335-414 3-1724 7031724 7031724YP
5-1/4 none 5/16 2-1/2 1-1/2 .120
Air lift set contains: (2) 2 hole defl ectors, (4) star lock washers, (Fits 26″ and 30″ blades) (4) 5/16″-24 X 21/32″ grade #5 - oval head screws and (4) hex nuts
335-232 6-0785 7060785 7060785YP
2-11/16 none 5/16 1-1/4 1-3/4 .120
Air lift set contains: (2) 2 hole defl ectors, (4) star lock washers, (4) 5/16″-24 X 21/32″ grade #5 - oval head screws and (4) hex nuts
STIGA355-027 1134-1452-01 12-1/4 .397 .335 3.25 2 .150
For Stiga Villa
355-247 1111-2759-01 12-11/16 3/4 none none 1-9/16 .095
355-007 1134-1903-00 14-1/2 .399 .334 3.24 2 .150
For Stiga Park
355-026 1134-0456-00 14-1/2 .397 .335 3.25 2 .150
For Stiga Villa
355-005 1134-2450-01 1134-9002-01
15 13/32 11/32 3-9/32 2 .150
For Stiga Park models 100M, 102M and Villa.
355-000 1134-9124-01 16-11/16 3 lobed none none 2.362 .134
Requires (3) for set. Fits model: Park 110 COMBI (2007 and newer).
355-030 1111-1530 18-1/8 .385 .326 2.12 2 .134
For Stiga / Multiclip.
355-002 1134-9125-01 18-1/8 3 lobed none none 2.52 .134
Requires (3) for set. Fits Stiga model: Park 125 COMBI (2007 and newer).
SNAPPER - also see MASSEY FERGUSON continued
09-26
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
355-246 1111-2598-01 20-13/16 13/32 5/16 2-1/8 3-5/16 .095
SWISHER360-573 3295 17-1/2 13/32 13/32 3 2-1/2 .187
(3) for 50″ cut. Shark Tooth mulching blade. Fits Swisher models: ZT2350A and ZT2450A.
355-732 660-1 20-1/2 .655X
.755
none none 2-1/4 .187
(3) for 60″ cut
355-050 9004 20-1/2 13/32 13/32 3 2-1/4 .187
(3) for 60″ cut, model T-60 Finish Cut Trailmower.
360-575 3293 20-1/2 13/32 13/32 3 2-1/2 .187
(3) for 60″ cut. Shark Tooth mulching blade.Fits Swisher models: T-60, T1360, T14560, T18560, T1360H, ZT2350, ZT2560, ZT2660 and ZT2660B.
360-580 see above 20-1/2 13/32 13/32 3 3 .250
(3) for 60″ cut. Shark Tooth mulching blade, Heavy Duty blade.
355-051 9005 22 13/32 13/32 3 2-1/4 .187
(2) for 44″ cut, model T-44 Finish Cut Trailmower.
TORO / WHEEL HORSE350-116 106077
106636 13-7/8 3/4 none none 2 .203
117192 / 3-11620(3) for 42″ cut, side discharge, Set# 106636 / 3-11620.
360-843 see above 13-7/8 3/4 none none 2-1/2 .203
(3) for 42″ cut, Shark Tooth mulching blade.
360-842 108-4081108-4081-03
14 5/8 none none 250 .250
108-4089-03, 108-4110-03, 108-4111-03,108-4112-03, 114-4961, 114-4962, 114-4964, 114-4965
(3) for 40″ cut. Shark Tooth mulching blade, Heavy Duty blade. For 40″ Turbo Force, 14 High Sail.
350-041 1002006693
14 3/4X 5/8
1/4 1-5/8 2 .203
(3) for 42″ cut, side discharge. Set# 6693 / 3-6693.Models R1-426, 5-1000 thru 5-1001, 5-1002, 5-1010, 5-1011, 5-1421 thru 5-1423 and 65-42 MS01, from 1966 thru 1976.
STIGA continued
09-27
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
350-108 106108106635
14-1/2 3/4 none none 2 .203
14-4879 / 79-2920 / 79-2920-03(3) for 42″ cut, fi ts 42″ rear discharge mowers. Set# 106635. (Replaces our now discontinued# 345-112)
335-453 112-0302 14-7/8 6 point star (5/8)
3/8 2-1/2 2-1/2 .150
(1) 335-453 and (2) 335-452 for 46″ cut. Mulching blade. Replaces the star centre hole. Centre blade, 1999 and after.
325-884 112-0302 14-7/8 6 point star (5/8)
3/8 2-1/2 2-1/2 .203
(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade. Fits LT1046 and i1046 series mowers. For star hole replacement blade.
360-850 116-6358-03120-9500-03
15.4 .660 none none 2-1/4 .160
(2) for 30” cut, Shark Tooth mulching blade. Fits TORO Timemaster 30, model#’s 20199 and 20200.
345-454 54-0010 54-0010-03
15-1/2 5/8 none none 2-1/2 .187
54-0010-09 / 103-0627 / 106-0630(3) for 44″ cut, deck# 57358,Fits Groundsmaster models 117 and 1144 Rider Tractors. Also Toro Walk behinds and Timecutter zero turn models.
345-039 55-494055-4940-03
15-1/2 5/8 none none 2-1/2 .203
55-4940-03 / 108-1125(3) for 44″ cut, High lift blade. Fits model 30144 - Midsize mower & walk behinds and Timecutter zero turn models.
345-114 92-795292-7952-03
15-1/2 5/8 none none 2-1/2 .187
92-7952-09 / 106-0630(3) for 44” cut. Fits TimeCutter ZX440 Recycler.
360-885 see above 15-1/2 5/8 none none 2-1/2 .203
(3) for 44″ cut, Shark Tooth mulching blade.
350-124 10-6078 10-66373-10607
16-1/16 3/4 none none 2 .203
(3) for 48″ cut side discharge, Set# 3-10607
360-844 see above 16-1/16 3/4 none none 2-1/2 .203
(3) for 48″ cut, Shark Tooth mulching blade
355-183 103-2527 16-1/4 5/8 none none 2-1/2 .250
(2) for 32” deck; 3 for 48” deck, Heavy duty blade
355-028 103-6581 103-2517
16-1/4 5/8 none none 2-1/2 .204
(3) for 48″ cut, Mulching blade, Heavy duty blade.
360-916 see above 16-1/4 5/8 none none 2-1/2 .204
(2) for 32” cut or (3) for 48” cut, Shark Tooth Mulching Blade.
TORO / WHEEL HORSE continued
09-28
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
335-452 112-3691 112-0304
16-3/8 6 pointstar (5/8)
3/8 2-1/2 2-1/2 .150
(2) 335-452 & (1) 335-453 for 46″ cut. Mulching blade. Replaces the star centre hole. Outside blade, 1999 & after.
325-885 112-0304 16-3/8 6 pointstar (5/8)
3/8 2-1/2 2-1/2 .203
(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades.Fits LT1046 and i1046 series mowers. For star hole replacement blade.
345-450 117-7277117-7277-03
16-1/2 5/8 none none 2-1/4 .160
(3) for 48” cut. High Lift blade, Standard duty blade. Fits Toro Titan Zero Turn mowers..
340-100 133-2137107-3192-03
16-1/2 5/8 none none 2-1/2 .240
(3) for 48” cut mid size mowers. Medium Lift blade, Heavy duty blade.
345-502 107-3192107-3192-03
16-1/2” 5/8 none none 2-1/2 .250
(3) for 48” cut. High Lift blade, Heavy duty blade.Fits Toro Commecial walk behinds, Z Master, Z Master G3 and GrandStand mowers. Lift: 1”
345-500 107-3196107-3196-03
16-1/2 5/8 none none 2-1/2 .250
(3) for 48” cut mid size mowers. Heavy Duty Blade. Fits Toro Commercial Recycler Mowers.
350-199 113579 17 5/8 none none 2 .204
(3) for 50″ cut, Fits Wheel Horse 718Z and 724Z, also replaces Dixie Chopper# 30227-50.
345-505 113579 17 5/8 none none 2-1/2 .250
(3) for 50” cut. High Lift blade. Heavy duty blade. Fits Wheel Horse 718Z and 724Z, Replaces Dixie Chopper# 30227-50.
345-214 117-1156117-1156-03
17-1/2 5/8 none none 2-1/4 .160
(3) for 50” cut. High Lift blade. Fits Toro Titan Z (2009 thru 2010).
345-212 112-9759 112-9759-03
17-1/2 5/8 none none 2-1/4 .164
(3) for 50″ cut, Standard Lift blade. Fits Toro Timecutter Z series.
345-210 110-6837110-6837-03
17-1/2 5/8 none none 2-1/4 .170
(3) for 50” cut, Heavy duty blade. High lift blade. Fits Toro Timecutter Z5000, model 74370 Time Cutter 74375.(Will replace Toro# 115-5059-03 if (3) blades ordered).
360-845 see above 17-1/2 5/8 none none 2-1/4 .187
(3) for 50” cut, Shark Tooth mulching blade. Fits Toro model Timecutter Z.NOTE: Can be used to replace Exmark 115-5059-03 / 115-5062-03 and Toro 115-5059-03 / 115-5062-03.
TORO / WHEEL HORSE continued
09-29
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
325-510 112-0316 17-7/8 6 pointstar (5/8)
none none 2.375 .164
(3) for 50” cut - Standard Duty blade. Fits TORO models: GT2100 (2006), GT2200 (2006 and 2007), LX500 (2006), SL500 (2007). NOTE: For heavy duty blade see our 325-507, Shark Tooth Blade see our 360-076.
325-507 112-0316 17-7/8 6 pointstar (5/8)
none none 2-1/2 .187
(3) for 50” cut - Heavy Duty blade. Found on Toro models: LX500 and GT2100 with 50” cut decks. (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011). NOTE: For standard duty blade see our 325-510, Shark Tooth Blade see our 360-076.
360-076 see above 17-7/8 6 pointstar (5/8)
none none 2-1/2” .187
(3) for 50” cut, Shark Tooth Mulching blade.
345-018 27-099044-5480
18 1/2 none none 2-1/2 .187
44-5480-03 / 106-0628
(3) for 52″ cut or (2) for 36″ cut for Groundsmaster, also used on ZTR’s.
345-462 56-239056-2390-03
18 1/2 none none 2-1/2 .187
56-2390-09 / 106-0626 / 108-1127
(2) for 36” cut and (3) for 52” cut walk behind mowers. High lift blade.
360-410 104-1301108-1477
18 1/2 none none 2-1/2 .203
92-7961 / 92-7961-03 / 92-7961-09 / 108-1127
(3) for 52″ cut, Shark Tooth mulching blade. NOTE: For H.D. version see our 360-418 (While Quantities Last)
345-553 108-1117 103-2528
18 5/8 none none 2-1/2 .250
105-7781 / 105-7781-03 / 1-633482
(3) for 52” cut. High Lift / Heavy duty blade. Fits Z Master mower, turbo force deck.
360-918 105-7779105-7779-03
18 5/8 none none 2-1/2 .203
105-7794 / 105-7794-03 / 105-7795 / 105-7795-03 / 105-7796 / 105-7796-03 / 108-1118 / 110-0406 / 110-0408 / 110-0409
(2) for 36″ cut or (3) for 52″ cut, Shark Tooth Mulching blade. Fits Toro Commercial Z-Master series. Replaces Atomic blade Toro# 105-7796-03 if you order (3) 360-918 blades.
345-439 55-4210 18 5/8 none none 2 .187
(2) for 36″ cut or (3) for 52″ cut. Fits models 30136 and 30152, midsize mowers.
345-470 40-3760 18 5/8 none none 2 .203
(3) for 52″ cut, Fits models GM117. (While Quantities Last).
TORO / WHEEL HORSE continued
09-30
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-464 107-1741 107-1741-03
18 5/8 none none 2-1/2 .187
(3) for 52″ cut. For Toro Time Cutter ZX models. NOTE: For Time Cutter Recycler blades see our 345-465 (While Quantities Last)
360-846 see above107-1742
18 5/8 none none 2-1/2 .187
107-1742-03 / 120-2379 / 120-2379-03(3) for 52″ cut, Shark Tooth mulching blade.
355-218 103-2518 18 5/8 none none 2-1/2 .204
(2) for 36” cut, (3) for 52” cut, Mulching blade.
345-452 105-7794105-7794-03
18 5/8 none none 2-1/2 .250
(3) for 52” cut. Heavy Duty blade. Medium Lift blade.Fits Toro Z-Master models: Z400 and Z500, also found on older Turbo Force 7 gauge decks.
355-067 109-6873 18 15/16 none none 2-1/2 .204
(3) blades for 52” cut. High lift blades. Fits TORO TITAN Z5200 Zero-Turn-Radius Riding Mowers.
355-041 103-6392103-6392-S
18 15/16 none none 2-1/2 .204
(3) for 52″ cut, Mulching blade, Fits Lazer Z for series #540,000 & higher; fi ts Viking, Metro 36″ & 52″ cut
360-003 103-6397 18 15/16 none none 2-1/2 .204
(3) for 52” cut, Shark Tooth Mulching Blade. NOTE: FOR HEAVY DUTY VERSION SEE OUR 360-008 > Next page
360-008 103-6397 18 15/16 none none 3 .250
(3) for 52” cut, Shark Tooth Mulching Blade, Heavy Duty blade. Fits EXMARK models: Lazer Z, 540,000 & higher.
345-400 115-4999 18-3/4 5/8 none none 2-1/4 .164
(3) for 54” cut. Mulching blade.For Toro Titan ZX5400 and ZX5420. Will replace Toro# 115-4999-03 if (Qty: 3) 345-400 are ordered.
355-001 115-9650115-9650-03
18-3/4 5/8 none none 2-1/4 .164
(3) for 54” cut, Mulching blade.Fits TORO Titan MX5400, MX5480, ZX5400, ZX5420 and ZX5450. (3) required to replace Exmark 115-9650-03.
360-415 115-4999115-4999-03
18-3/4 5/8 none none 2-1/2 .187
115-2454-03 / 115-4999-03 / 115-9650-03(3) for 54” cut, Shark Tooth mulching. Fits Toro Titan ZX5400 & ZX5420.(3) required to replace Toro# 115-2454-03 / 115-4999-03 / 115-9650-03
350-157 109918109079
18-3/4 3/4 none none 2 .203
(2) for 37″ cut, side discharge mowers, Set# 109079
TORO / WHEEL HORSE continued
09-31
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-330 20-2730 19 7/16 none none 2-1/4 .140
Fits old Whirlwind and Guardian mowers, use with our 405-175 blade adapter. (While Quantities Last)
345-043 86-001086-0010-03
19 1/2 none none 2-1/2 .250
(7) blades required for 455D model.
360-848 106-7166-03107-0210-03
19 1/2 none none 2-1/2 .250
107-0215-03 / 108-1451 / 108-1452 / 110-6116-03
(7) for Toro Groundsmaster 455D, 4100D, 4100-D and 4110-D series. Shark Tooth Mulching blade, Heavy Duty blade.
345-165 14-488914-779979-1720
19-1/4 5/8 none none 2-1/2 .187
79-3060 / 79-3061 / 79-3061-03(2) for 38″ cut, Mulching blade - Recycler, fi ts Zero Turn ZTR models 616 and 620.
345-038 57-470057-4700-03
19-1/4 5/8 none none 2-1/2 .187
57-4700-09
(2) for 38″ cut, High lift blade, side discharge, fi ts models 612, 616 and 620 ZT units, also fi t 200 series side discharge
360-800 see above 19-1/4 5/8 none none 2-1/2 .187
(2) for 38″ cut, Shark Tooth mulching blade. (While Quantities Last).
360-802 see above 19-1/4 5/8 none none 2-1/2 .203
(2) for 38″ cut, Shark Tooth mulching blade. (Heavy Duty version of our 360-800)
345-050 112-8841 112-8841-03
19-3/4 7/16 3/8 2-7/16 2-1/4 .129
Pushmower blade for 20” cut model. (fi ts 789963 with 20” decks). Fits Toro 29639 and 29641.
360-803 110-5946110-5948110-5948-03
20 1/2 none none 2-1/2 .250
Fits TORO GROUNDSMASTER 5900 / 5910. Shark Tooth mulching blade / Heavy duty blade.Requires (9) blades for 16 FT cut or (3) blades per deck X 3 decks.
345-060 69-6920 20 5/8 none none 2-1/2 .250
Requires (11) blades for 16 FT cut. Heavy duty blade. For TORO GROUNDSMASTER model: 580D.
360-809 108-1453107-0217-03
20 5/8 none none 2-1/2 .203
Requires (11) blades for 16 FT cut. For TORO GROUNDSMASTER model: 580D.
TORO / WHEEL HORSE continued
09-32
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-275 93-024193-0241-03
20-1/4 7/16 none none 2-1/4 .134
21″ cut, Recycler with 4.5 Hp engine, model 20444, walk behind.
360-810 110-4701110-4701-03
20-1/2 1/2 none none 2-1/2 .250
110-4702 / 110-4702-03 / 110-4703 / 110-4703-03
(3) for 60” cut, Shark Tooth mulching blade / Heavy duty blade. Fits TORO GROUNDSMASTER 7200.
345-504 105-7715-03 20-1/2 5/8 none none 2-1/2 .250
(3) for 60” cut. Heavy duty blade. Fits TORO Professional Z Master with 7-guage side.
345-506 105-7777-03 20-1/2 5/8 none none 2-1/2 .250
(3) for 60” cut. Heavy duty blade. Fits TORO Recycler decks.
345-171 112947 20-1/2 5/8 none none 2-1/2 .204
(3) for 60″ cut, Wheel Horse models.
345-555 105-7718 105-7718-03
20-1/2 5/8 none none 2-1/2 .250
108-1114 / 108-1123(3) for 60” cut, Heavy duty blade.
360-811 105-7715105-7715-03
20-1/2 5/8 none none 3 .250
105-7716 / 105-7716-03 / 105-7777 / 105-7777-03 / 105-8777 / 105-8777-03 / 106-8777 / 108-1123 / 108-1128 / 110-0405
(3) for 60” cut, Shark Tooth mulching blade / Heavy duty blade. Fits TORO Turbo Force deck built 2010 and later.
345-051 108-3762-03108-3762-03P
20-7/8 7/16 3/8 2-7/16 2-1/4 .150
108-0954-03 / 93-4106 / 93-4106-03 / 91-4106-03P
For 21” cut mower. Fits TORO Most 21” recycler decks: does NOT fi t 20465, 20466, 20475, 20476, 20482, 20483, and 20487. (For Shark Tooth version see our 360-804).
360-804 see above 20-7/8 7/16 3/8 2-7/16 2-1/4 .149
21″ cut, Shark Tooth mulching blade.
330-845 612543612543-01
20-7/8 5/8 17/32 2-9/16 3 .134
612543-03 / 683682 / 684380Fits most 21″ walk behind mower without BBC, new style, will replace 330-779 minus stiff ening plate.
345-203 14-165914-9419
20-15/16 7/16 3/8 2-7/16 2-1/4 .134
*Includes Stiffi ner plate* 75-9420 / 91-2256 / 91-2256-03 / 80-0510 / 80-0510-03
21″ cut, Recycler. (Includes: stiff ening plate), For older walk behind mowers.
TORO / WHEEL HORSE continued
09-33
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
345-496 62-770062-7700-03 / P
20-15/16 7/16 3/8 2-7/16 2-1/4 .134
21″ cut, Super high lift blade, Vacu - Power - rear bagger, model 26622
360-420 see above 20-15/16 7/16 3/8 2-7/16 2-1/4 .150
21″ cut, Shark Tooth mulching blade.
345-306 8-5230 21 7/16 none none 2-1/4 .134
21″ cut, fi ts Guardian models 1971 thru 1973 and Whirlwind models 1972 thru 1976.
345-348 20-2720 21 7/16 none none 2-1/4 .134
21″ cut, fi ts Whirlwind II model, 1977 and later.
345-397 23-0070 26-0880
21 7/16 3/8 2-7/16 2-1/4 .134
3-8615 / 42-1000 / 42-1000-03 / 107-4276-03 / 107-4276-03P
21” cut. Fits EXMARK 21” rear bagger and TORO 21” rear bagger.
335-551 112-0315 21-3/16 6 pointstar (5/8)
5/16 2-1/2 2-3/4 .149
(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after; also fi ts on newer Toro mowers using the 5 point blade hub, model 13AX60RG744.
345-421 44-6250 44-6250-03
21-1/2 1/2 none none 2-1/2 .187
106-0629 / 108-1124 (3) for 62″ cut, Groundmaster.
360-462 104-1303106-0631
21-1/2 1/2 none none 2-1/2 .250
(3) for 62″ cut. Shark Tooth mulching blade, HEAVY DUTY
345-045 92-560892-5608-03
21-11/16 1/2 none none 2-1/2 .250
(3) for 62” cut. Recycler, (7) for 11 FT Groundsmaster 4000D. Heavy duty blade. Fits TORO Recycler & Groundsmaster models: 3320, 3280D, 4000D, 7200 with 62” Guardian Recycler Mower and 7210 with 62” Guardian Recycler Mower.
360-926 107-0214107-0241-03
21-11/16 1/2 none none 2-1/2 .250
110-6115-03(3) for 62” cut, Shark Tooth mulching blade.
TORO / WHEEL HORSE continued
09-34
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
TORO / WHEEL HORSE continued345-227 106-2247-03
110-1857-0321-11/16 5/8 none none 2-1/4 .160
(2) for 42” cut, Fits Toro model Time Cutter Z - Standard lift blade.
345-225 110-6568 110-6568-03
21-11/16 5/8 none none 2-1/4 .164
117-5372 / 117-5372-03(2) for 42" cut, Fits Toro model Time Cutter Z. High lift blade.
345-396 106-8744106-8744-03
21-11/16 5/8 none none 2-1/4 .160
(2) for 42” cut, Super High lift / Bagger blade. Fits Toro model Time Cutter Z.
360-847 see above 21-11/16 5/8 none none 2-1/4 .160
(2) for 42″ cut, Shark Tooth mulching blade.
360-820 see above 21-11/16 5/8 none none 2-1/4 .164
(2) for 42″ cut. Shark Tooth mulching blade.
345-322 104-8697104-8697-03
21-3/4 7/16 none none 2-1/4 .150
104-8697-03P / 108-9764 / 108-9764-03 / 108-9764-03PFits 22” Recycler. Found on newer Lawn Boy / Toro push mowers equipped with Honda engines. Fits on Toro Atomic 22” mowers.
360-806 108-9764108-9764-03
21-3/4 7/16 none none 2-1/4 .150
108-9764P / 131-4546-03 / 131-4547-03 / 59534 / 59534P
Shark Tooth mulching blade.
345-054 108-7395-03 22 1/2 none none 2-1/2 .250
For Toro Commercial mowers. Combination blade. Heavy duty blade, Found on Toro Groundsmaster model: 4300-D etc.
345-055 117-0209-03 22 1/2 none none 2-1/2 .250
For Toro Commercial mowers. Angle Sail blade. Heavy duty blade, Found on Toro Groundsmaster model: 4300-D etc.
360-934 114-0434-03 22 1/2 none none 2-1/2 .187
For Toro Commercial mowers. Shark Tooth Mulching blade - High Lift blade.Found on Toro Groundsmaster model: 4300-D etc..
355-170 103-4209130-2860
22 .885 none none 2-3/4 .187
(1) 335-170 LEFT HAND blade (Black) plus (1) 355-171 RIGHT HAND blade (Red) for 42” cut.Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.
355-171 103-4210130-2859
22 .885 none none 2-3/4 .187
(1) 335-171 RIGHT HAND blade (Red) plus (1) 355-170 LEFT HAND blade (Black) for 42” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.
09-35
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
360-808 110-0624-03 24-1/2 1/2 none none 2-1/2 .250
(3) for 72” cut, Shark Tooth mulching blade. Fits Toro Groundsmaster 3280 - D3320.
345-508 105-7711-03110-0404
24-1/2 5/8 none none 2-1/2 .250
(3) for 72” cut. Heavy duty blade. Fits TORO mid-fl ow deck, Z Master.
345-412 105-7784105-7784-03
24-1/2 5/8 none none 3 .250
110-0622-03(3) for 72” cut, High lift blade, Heavy duty blade. Fits TORO Z Master (2005 and newer) and TORO Z Master G3.
360-995 105-7784105-7784-03
24-9/16 5/8 none none 3 .250
(3) for 72” cut, Shark Tooth Mulching Blade. Fits Lazer Z model; fi ts GRAVELY PM272 series.
345-223 57-025094-186194-1861-03
24-3/4 1/2 none none 2-1/2 .250
(3) for 72″ cut Groundmaster - rear discharge.
360-824 see above 24-3/4 1/2 none none 2-1/2 .250
(3) for 72” cut, Shark Tooth mulching blade.
345-314 23-2410 23-2410-03
25 3/4 none none 2-1/2 .250
29-5530 / 29-5530-03(3) for 72″ cut, Left hand cut blade for Groundsmaster, Heavy duty blade.
360-828 see above 25 3/4 none none 2-1/2 250
(3) for 72″ cut, Shark Tooth mulching blade, Left hand cut, Heavy Duty blade.
355-176 103-4207130-2861
25 .885 none none 2-3/4 .187
(1) 335-176 LEFT HAND blade (Black) plus (1) 355-177 RIGHT HAND blade (Red) for 48” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.
355-177 103-4208130-2862
25 .885 none none 2-3/4 .187
(1) 335-177 RIGHT HAND blade (Red) plus (1) 355-176 LEFT HAND blade (Black) for 48” cut. Fits Exmark NAVIGATOR bagging mowers and Toro 8000 series Direct Collect Zero turn rear bagging mowers.
345-177 85-6040 85-6040-03
25-3/16 1/2 none none 2-1/2 .250
(3) for 72” cut, Heavy duty blade, Recycler deck blade, used on Groundsmaster models 322, 322D, 325 and 325D.
345-180 108-1958108-1958-03
25-3/16 1/2 none none 2-1/2 .250
(3) for 72” cut, Heavy duty blade, Fits TORO Groundsmaster models: 360, 7200, 7210 with 72” Guardian Recycler Mower. Also found on Z597-D Z Master mowers.
TORO / WHEEL HORSE continued
09-36
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
360-830 100-5754-03 105-9810-03 107-0235-03
27 1/2 none none 2-1/2 .250
Shark Tooth mulching blade. (1) for 27″ Long blade for each individual rotary deck.Found on Toro Groundsmaster models: 3500D, 3505D, 4500D and 4700D. Note: Will replace Toro mulching blade#’s 100-5754-03 and 105-9810-03
345-413 33-4750 33-4750-03
31-3/8 5/8 none none 2-1/2 .187
32″ cut, High Lift blade.
345-338 80-4430 80-4430-03
31-3/8 5/8 none none 2-1/2 .187
32″ cut, Mulching blade - Recycler for rear engine riders.
TROY BILT - see BOLEN / TROY BILT & MTD LISTINGSWALKER
355-095 5705-0 20 5/8 13/64 3 2-3/4 .164
(3) for 54″ cut, side discharge. Note: Not for use on Walker DSD54″ decks.
355-097 5705-4 22 5/8 13/64 3 2-3/4 .164
(1) 355-097 and (1) 355-098 for 42″, (3) for 54″ cut; rear discharge, Left hand cut blade
355-098 5705-3 22 5/8 13/64 3 2-3/4 .164
(1) 355-098 and (1) 355-097 for 42″, (3) for 54″ cut; rear discharge, Right hand cut blade.
355-099 7705-2 25 5/8 13/64 3 2-3/4 .187
(1) 355-099 and (1) 355-100 for 48″, rear discharge, Left hand cut blade
355-100 7705-1 25 5/8 13/64 3 2-3/4 .187
(1) 355-100 and (1) 355-099 for 48″, rear discharge, Right hand cut blade
WHEEL HORSE - see TORO / WHEEL HORSE
WHITE - see MTDWOODS
320-545 70014 15 1/2 none none 2 .203
(3) for 44″ cut, standard lift blade.
345-751 5081 5081KT
16-3/4 5/8 none none 1-3/4 .203
(3) for 48″ cut, Left hand cut blade, fi ts models FM48, FM842 and RM400. (While Quantities Last)
320-546 70104 70104KT
18 1/2 none none 2 .203
(3) for 52″ cut.
TORO / WHEEL HORSE continued
09-37
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
320-550 70104 70117
18 1/2 none none 2-1/2 .240
(3) for 52” cut. Fits models: 3452, 6052, 6152, 9052, 9252, 9352, 9552, 9652 and 9852; requires 3 for 52” deck.
360-913 see above 18 1/2 none none 2-1/2 .203
(3) for 52″ cut, Shark Tooth mulching blade.
345-769 62346950 / KT
20-3/16 5/8 none none 2 .204
(3) for 60″ cut, model 59C2, medium lift.
345-777 23825 / KT31359 / KT
20-1/4 5/8 none none 2 .204
(3) for 60″ cut, Left hand cut blade, fi ts models RM500, F35 and RM59.
345-433 34615 34615KT
20-11/16 5/8 none none 2-1/2 .240
(3) for 60″ cut, High lift blade, fi ts new tunnel deck. Models RM360 and RM550, Heavy duty blade.
320-547 70134 21 1/2 none none 2-1/2 .250
(3) for 61″ cut, Heavy duty blade.
360-915 see above 21 1/2 none none 2-1/2 .250
(3) for 61″ cut, Shark Tooth mulching blade.
345-764 13404 / KT31306 / KT
24-1/2 1 none none 2-1/2 .204
(3) for 72″ cut, Left hand cut blade, fi ts models L306, RM306 and RM660. Heavy duty blade.
345-434 15127 / KT 24-11/16 5/8 none none 2-1/2 .240
(3) for 72″ cut, High lift blade, fi ts new tunnel deck. Models RM372 and RM660, Heavy duty blade.
YANMAR - see above WOODS listings
YARDMAN - see www.bantasaw.comYAZOO / KEES
350-603 206-660 20-3/4 3/4 X1-1/4
none none 2-1/4 .250
(3) for 60″ cut, Right hand cut blade. Heavy duty blade.
350-538 206-760 20-7/8 3/4 X1-1/4
5/16 3 2-1/4 .240
(3) for 60″ cut, Left hand cut blade. Heavy duty blade.
“BLADE by LENGTH CHART” starts on Page 09-39
WOODS continued
09-38
Small Engine Parts & AccessoriesBLADES - O.E.M REPLACEMENTBLADES - O.E.M REPLACEMENT
B B
375-378 Weedeater#92343 701557AYP# 85713
7 9/16D-Hole
S/4 SC 1-1/2 .095
Fits Weedeater models: 4000 and 4500. Left hand cut. Also fi ts AYP model 795535. (SHARPENED)
375-364 Multi- Application
7-11/16 1 NS SC 2 .125
Edger blade found on Echo, Green Machine, Ryobi, Shindaiwa, Stihl and many others. Fits Maruyama Trimmer / Edger, Green Machine & Echo Trimmer / Edger & Stihl FC 72 trimmer. Replaces: Echo# 720237001, Green Machine# 237001, Husqvarna# 601000749, Maruyama# 216062, McCulloch# 301272, Red Max# 636715110, Ryobi# 613223 / 613233R, Shindaiwa# 7295092110 and Stihl# 4133-713-4101, 4133-713-4102. Fits ECHO models: PAS2601, PE200, PE201, PE230, PE231, PE260, PE261, PE310, PE311, PE2000, PE2400, PE2601, PE3100. Fits STIHL models: FC72, FC75, FC85 and FC110. (UNSHARPENED, NON HEAT TREATED)
375-311 Universal 9 OD 1/2 4Star
9OD
13gauge
Curvature of blade prevents clogging.
375-089 John Deere#M47147
9 1/2 S/2 SC 2 .155
Fits #2 and #3 edgers. Heavy duty.This edger blade has a universal type centre hole, it will accept a 1/2″ round or 7/16″ square shaft.
375-316 MTD#781-0080 981-0080
9 5/8 NS RE3T 2-1/2 .095
Fits MTD edger models: 25B-550C000; 25B-550C029 (2008 and newer); 25B-550D200, 2008 and newer; 25B-550229 (2008 and newer); 25B-520J000 (2008 and newer); 25B-520J029 (2008 and newer); 25B-520K200 (2008 and newer).
375-403 Universal 10 1/2 S/4 AB & AC
2 .120
Angle Beveled Edger Blade.
375-022 Lesco# 050006050545
10 1/2 S/4 SC 2 .150
Mclane# 2059HD10 / Tanaka# 43533110200
Used on commercial edgers. Sharpened / 4 sides / straight cut edge.
375-162 UniversalLesco# 014222
10 1/2 S/2 SC 2 .149
050547 / Tanaka# 43533110200Sharpened / 2 sides / straight cut edge.
TypeS/2---------Sharpened, 2 SidesS/4---------Sharpened, 4 SidesNS---------------Not Sharpened
DesignSC------------Straight Cut EdgeRE3T ------------ Rounded Edges, 3 TeethAB ------------ Angle Beveled EdgeAC ------------ Angle Cut Edge
09-39