BBA - 100V HF ANTENNAbushcommantennas.com.au/brochurelibrary/Price... · antennas, the BBA-100V...
2
DB00960/3 ©Bushcomm 2016 Bushcomm HF Antennas Product Brief Built using the same rugged design techniques as our commercial series antennas, the BBA-100V provides performance at an entry level price. These antennas are highly efficient, and engineered to meet the exacting standards of professional users. Frequency range is specified according to useful VSWR, and all components are validated for rated power. The Bushcomm BBA has the flexibility to suit a wide range of installation situations - between two purpose built towers at a professional site, in an inverted “V” configuration, or even between a tree and the back shed. Light yet sturdy construction ensures low total mass wind loading. The highest quality materials are used in construction, such as stainless steel wire and fittings, and UV resistant fibreglass rods, to produce an antenna that will survive the rigours of the outdoors for many years. There are many variants in the BBA family with sizes and power ratings to suit a wide range of applications. BBA - 100V HF ANTENNA HF BROADBAND MULTIWIRE DIPOLE SPECIAL FEATURES 2-30MHz **** No tuner required S/S Wire and Fittings UV Resistant rod & balun/load boxes Easy Installation (instruction provided) Variation of length and power available Configurable in Horizontal or Inverted V Performance & Durability at a Low Price FULL BBA FAMILY: * BBA100V - 125w PEP Voice * BBA100C - 130w continuous * BBA100CS - 130w continuous, short * BBA100CE - 130w continuous, long * BBA-600VS - 600w PEP, short * BBA600V - 600w PEP * BBA600VE - 600w PEP, long * BBA1kD - 1kW continous * BBA1kDE - 1kW continous, long * BBA1kCF - 1kW continous, extra long
Transcript of BBA - 100V HF ANTENNAbushcommantennas.com.au/brochurelibrary/Price... · antennas, the BBA-100V...
DB00960/3 ©Bushcomm 2016
Bushcomm
HF Antennas Product Brief
Built using the same rugged design techniques as our commercial series antennas, the BBA-100V provides performance at an entry level price.
These antennas are highly efficient, and engineered to meet the exacting standards of professional users. Frequency range is specified according to useful VSWR, andall components are validated for rated power.
The Bushcomm BBA has the flexibility to suit a wide range of installation situations - between two purpose built towers at a professional site, in an inverted “V” configuration, or even between a tree and the back shed.
Light yet sturdy construction ensures low total mass wind loading. The highest quality materials are used in construction, such as stainless steel wire and fittings, and UV resistant fibreglass rods, to produce an antenna that will survive the rigours of the outdoors for many years.
There are many variants in the BBA family with sizes and power ratings to suit a wide range of applications.
BBA - 100V HF ANTENNAHF BROADBAND MULTIWIRE DIPOLE
SPECIAL FEATURES
2-30MHz ****
No tuner required
S/S Wire and Fittings
UV Resistant rod & balun/load boxes
Easy Installation (instruction provided)
Variation of length and power available
Configurable in Horizontal or Inverted V
Performance & Durability at a Low Price
FULL BBA FAMILY:
* BBA100V - 125w PEP Voice* BBA100C - 130w continuous* BBA100CS - 130w continuous, short* BBA100CE - 130w continuous, long* BBA-600VS - 600w PEP, short* BBA600V - 600w PEP* BBA600VE - 600w PEP, long* BBA1kD - 1kW continous* BBA1kDE - 1kW continous, long* BBA1kCF - 1kW continous, extra long
DB00960/3 ©Bushcomm 2017
Bushcomm
HF Antennas Product Brief
Specification Summary
Above: Bushcomm Balun showing coaxial strain relief feature***
HEAD OFFICE 21 River Road, BAYSWATER WA 6053 AUSTRALIAEMAIL: [email protected]: www.bushcomm.com PHONE: +61 8 6144 3204FAX: +61 8 9378 4429
SPECIFICATION
ELECTRICAL
Frequency Range 2 - 30MHz ****
Nominal Input Impedance 50 Ohm
VSWR (typical) Better than 2:1
Gain 5dBi (typical)
-6dBi at 3.6 MHz (typical)
Power Rating: 60W continuous 130W PEP
Input connector: UHF Type socket (S0239)
MECHANICAL
Shipping Weight: Approx 4kg
Antenna Length 27 metre
Radiating elements 2mm Stainless Steel (G304)
Wind Rating 210 km/hr*
Mast Spacing 29m horizontal tower spacing**, 20m footprint Inverted V
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
VS
WR
Frequency (MHz)
BBA-100V -Measured VSWR Feedpoint
30m RG58
-25.0-20.0-15.0-10.0
-5.00.05.0
10.0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Gai
n (
dB
i)
Frequency (MHz)
BBA SeriesModelled Gain
Height = 20m
* In accordance with AS1170.2 – 1989 SAA Loading Code – Wind Loads
** Approximate spacing. Will vary location to location and depending on preference *** Coaxial cable not included, can be purchased separately**** Frequency Range specified according to useful VSWR - Where performance is required below 3.5Mhz, we recommend the BBA-100CE
