BB45 SERIES DRAG SCRAPERS
Transcript of BB45 SERIES DRAG SCRAPERS
![Page 1: BB45 SERIES DRAG SCRAPERS](https://reader030.fdocuments.in/reader030/viewer/2022020621/61e7b08b39089c2be14bbb93/html5/thumbnails/1.jpg)
Land Pride BB45 Series Pull-Type Drag Scrapers are ideal for moving large quantities of material, leveling, and finish grading. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas.
BB4596 BB4510 BB4512
Horsepower 70-130 HP
Hitch Pull-type
Working Widths (cm) 96" (245) 10' (305) 12' (366)
Clevis Swivel Ball, Clevis or Swivel Clevis
Tongue Removable
Capacity 1-3/4 cu.yd 2-1/4 cu.yd 2-3/4 cu.yd
Dump Clearance 21"
End Plates 3/8"
Moldboard 1/4"
Cutting Edge 1/2" x 6"
Axle Fixed or Tilt
Tilt Cylinder 3" x 8"
Tilt Angle 3-1/2 Degrees, 7"
3-1/2 Degrees, Approx. 8"
Tires & Rim 15" Implement Recap; 5 Bolt, 4.5" Rim
Transport Lights Dual, Optional Standard
Colors
• 4" x 4" Square tubing main beam and tongue• 5" Maximum cutting depth can load the bucket quickly• Optional weight tray can be filled with 760 lbs. of concrete for additional weight when scraping and moving material
• Choose the tilt axle option for shaping slopes, terracing, or ditching. The tilt cylinder will raise one side of the drag scraper approximately 8" (7" on BB4596).
Vertical gussets for superior strength under side loads.
Reshape country roads, waterways and terraces.
*See dealer for complete warranty information. 79www.landpride.com
DIR
TWO
RKIN
G
HP REQUIRED HITCH
70-130 HP Pull-Type
BB45 SERIES DRAG SCRAPERS