Baylor Business Selling Outside 2022 Seller Scenario
Transcript of Baylor Business Selling Outside 2022 Seller Scenario
Baylor Business Selling Outside 2022 Seller Scenario
Overview The BBSO competition provides Baylor ProSales students with important skill-building experiences with complex value-selling environments. In such environments, sellers must understand a spectrum of possible buyer needs. In this competition scenario, you work for the 3M company, a Fortune 500 organization headquartered in the greater Minneapolis-St. Paul area of Minnesota. A multinational conglomerate, 3M comprises four business areas: Safety & Industrial, Transportation & Electronics, Health Care, and Consumer. With 90,000 employees worldwide and offering more than 60,000 products, 3M makes up one of the thirty Dow Jones Industrial Average Components. In addition to household brands such as Post-it®, Scotch®, and Nexcare™, 3M specializes in a variety of commercial and industrial products and supplies. You work for the 3M’s Safety & Industrial Division which is a core business at 3M. The Safety & Industrial Division serves the global industrial, electrical and safety markets and consists of personal safety, adhesives and tapes, abrasives, closure and masking systems, electrical markets, automotive aftermarket, and roofing granules. With 3M’s broad product portfolio installed across a range of industries, consumers and business customers are never more than 10 feet away from a 3M product. Your Role and Opportunity As a Safety & Industrial sales representative for 3M, your job is to penetrate prospective customers and service existing customers in your territory. You sell into a variety of customer types, including end users. Your product portfolio includes all types of adhesive products. Your personal goal is to get one of the products in your portfolio spec’d into one “new” manufacturing process each quarter. You’ve identified an exciting prospect in your central Texas territory and what might be this quarter’s new manufacturing opportunity: Spas Spectacular. Spas Spectacular is a single-location manufacturer of hot tubs or spas. You are excited about this opportunity because this company manufactures 75 hot tub units per day over a single eight-hour shift. Your background research suggests that demand is increasing for hot tubs as consumer investment in luxuries and home improvements has continued to escalate since the start of the COVID pandemic. You are not sure how this increased demand has impacted Spas Spectacular’s manufacturing processes. You’ve picked up that there may be some manufacturing concerns as you’ve seen a negative pattern in their online reviews. Prior to setting this appointment, you had not spoken with anyone at Spas Spectacular. 3M’s CRM (customer relationship management) system does not contain any information on this account as it relates to direct orders or prospecting activities. Spas Spectacular may purchase 3M products indirectly from one of your distributors. However, none of the distributors with whom you work in this geographic area has brought Spas Spectacular to your attention.
You did a cold call (walk in) into the manufacturing plant and spoke briefly with Ken Davis, the plant manager. Ken was heading into a meeting and asked that you set up an appointment. Prior to your face-to-face meeting scheduled for January 27, 2022, you’ve spoken with Ken for a total of 60 seconds. Your secondary research to date has been primarily at the industry-level, so you have little company-specific information. Since Ken agreed to the meeting, he must clearly anticipate areas where 3M might provide value. What You’ve Learned About Manufacturing Spas In your background research on how spas are manufactured, you found a useful video from one of Spas Spectacular’s competitors, Jacuzzi (https://www.youtube.com/watch?v=dcPOjBlxdeM). You learned that spas are “thermoformed” over a mold from a single large sheet of acrylic material. After being removed from the thermoform, the spas are assembled upside down through both machine- and human-laden processes. Human operators cut the openings for the water and electrical systems. These operators use some type of adhesive to bond in jet housings, lights, a control panel, and speakers into the acrylic structures. You are not sure what Spas Spectacular is using for their adhesive application at this stage of the manufacturing process. It may be that they are using silicone because silicone performs well in high temperatures. Silicone is also very easy to use and therefore requires limited operator skill. Silicone is considered excellent for sealing but not as an adhesive. However, many manufacturers use silicone as both a sealer and an adhesive as a result of its very low cost. Your 3M research team notes that silicone is generally available in market for $6.00-$8.00 per cartridge. If Spas Spectacular is using silicone for both sealing and adhesion, you’ll need to determine what they are paying per cartridge. Once components such as jet housing, lights, a control panel, and speakers are placed and bonded, the bonds are clamped for 24 hours until the silicone cures. The Jacuzzi video didn’t show that part of the process, but you learned about the downtime in curing silicone based on your experience with other manufacturing processes involving silicone (most recently, you were working with an outdoor sign manufacturer who was relying on silicone as both an adhesive and sealant). After the silicone is cured, spas are then water tested, dried, shrink-wrapped, and then shipped either to retailers or directly to consumers. Most spa manufacturers offer a three-to-five year warranty period. Your background research shows that Spas Spectacular is offering a higher-end warranty (five years) so they must ensure product reliability as it relates to the manufacturing process for housing the jets, lights, a control panel, and speakers.
Preparing for the Sales Call In preparing for this sales call, you need to hypothesize potential opportunities for your 3M product line. The silicone hypothesis is tops on your list because silicone is not a great adhesive. You speculate that silicone bond lines may create water intrusion points as the spa units are tested in plant or operating in homes. If that happens as you hypothesize, Spas Spectacular could be facing quality control issues (i.e., products needing to be reworked before being shipped) and/or warranty issues (i.e., water seepage resulting in electrical and/or plumbing damage). Either of these scenarios will cost Spas Spectacular in materials and rework. The warranty issues might suggest additional hidden costs in consumer confidence and brand equity. If your silicone hypothesis is correct, you will propose a Polyurethane Reactive Adhesive (PUR250060) to replace the low-cost silicone. PUR250060 is a fast-setting solution with a two-minute open time. Open time is the amount of time the adhesive can be dispensed onto a substrate (surface) before it needs to be bonded. In other words, human operators must work quickly with a Polyurethane Reactive Adhesive. The good news about PUR250060 is that it has a 60-second process time to reach handling strength. Handling strength represents the amount of time necessary for the product to “sit” before moving it into the next manufacturing step without damaging the bond. In technical terms, handling strength is defined as >50 psi in overlap shear strength. As you consider your narrative to address the silicone hypothesis, you recognize that key elements of the conversation involve positioning the PRU250060 as a hybrid solution, combining the simplicity of using a hot melt adhesive (which is similar to a hot glue gun application used in consumer crafts) with the strength of a structural adhesive. A structural adhesive is defined as a bond with >1000 psi in overlap sheer strength at full cure. Common structural adhesives include one- and two-part epoxies, acrylics, and moisture-curing urethanes. Changing the manufacturing process from a silicone (which requires no equipment other than a standard applicator) to PUR250060 means new equipment is needed. PUR250060 is applied using a heated applicator that runs on 120V electricity. Each work station also must have powered air where the bonding is applied. The good news is that with the quick setting time to handling strength, Spas Spectacular would likely only need one work station with this new heated applicator and powered air. In your experience, having electricity and powered air at the work station is typically not an issue. Since the PUR250060 eliminates the need for clamping and the 24-hour cure time, spa units can move from the bonding phase into water testing in about one hour. The cartridges of PUR250060 that are loaded into the heated applicator must be heated for 45 minutes prior to use. You anticipate that this heat-up time can be easily accommodated in the manufacturing flow/process. Heated cartridges have a heated life of 16 hours so there’s tons of flexibility in use on the manufacturing line. You don’t know how many shifts (e.g., 7am-3pm; 3pm-11pm; 11pm-7am) that Spas Spectacular runs, but this 16-hour heated life means that heated applicators can carry over from one shift to another.
In your preparation for the call, you know that you must have a good understanding of the overall value proposition associated with transitioning from silicone to PUR250060. So, you checked your product specs and noted that there are five cartridges of PUR250060 in each case. Each cartridge of adhesive yields 250 lineal feet of adhesive using a 1/8” semicircular bead. The cost of each cartridge is $30 so a case sells for $150. The adhesive is 100% solid and free of any volatile organic compounds (VOCs). VOCs are emitted as gases, which may have short- and long-term adverse health effects. Since your product is free of any VOCs, PUR250060 does not require any special respiratory personal protection equipment (PPE)s or ventilation in the plant. Human operators applying PUR250060 will need to have heat-resistant gloves and protective eyewear. Luckily, 3M has great glove and protective eyewear products. One pair of 3M heat-resistant gloves costs $40 and typically lasts 6 months. A pair of 3M protective eyewear typically costs $15 and lasts a typical employee 6 months. As you prepare for this sales call, you found resources in 3M’s Marketing and Sales Library. You’ve printed the technical data pages and brochures (reproduced following this page) for your preparation. You also set aside time to watch two additional videos:
- Introduction to 3M™ Polyurethane Reactive (PUR) Adhesives - YouTube - PUR Demonstration Video - YouTube
(All product pricing information is hypothetical for the teaching and learning experience.)
3Scotch-WeldTM
Polyurethane Reactive (PUR) Easy 250 Wood Adhesive EZ250015 • EZ250060 • EZ250120
ProductDescription
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Wood Adhesives are 100%solid, warm temperature applied, moisture curing urethanes. These products bond well towood and wood based surfaces as well as select plastics. These products offer a widevariation of open and set times as well as the ability to produce very thin bond lines.
3M™ Scotch-Weld™ Polyurethane Reactive Fast setting adhesive ideal for (PUR) Easy 250 Wood Adhesive EZ250015 bonding wood and select plastics.
3M™ Scotch-Weld™ Polyurethane Reactive Medium setting, low viscosity(PUR) Easy 250 Wood Adhesive EZ250060 ideal for wood and select plastics.
3M™ Scotch-Weld™ Polyurethane Reactive Medium setting, low viscosity(PUR) Easy 250 Wood Adhesive EZ250120 ideal for bonding wood and
producing thin glue lines.
Technical Data February, 2007
Typical UncuredProperties
Note: The following technical information and data should be considered representative ortypical only and should not be used for specification purposes.
3M™ Scotch-Weld™ PUR Easy 250 Wood Adhesive
Property EZ250015 EZ250060 EZ250120
Application Temperature 250°F (121°C) 250°F (121°C) 250°F (121°C)
Viscosity @ 250°F (121°C)1 7,000 cps 7,000 cps 3,000 cps
Color (solid) white/off-white white/off-white white/off-white
Open Time2,4 1.5 minutes 2 minutes 4 minutes
Set Time3,4 15 seconds 60 seconds 120 seconds
Density, Lbs/Gallon (molten) 8.9 8.8 8.9
Features • 100% solids • Moisture curing urethane
• One component • Rapid rate of strength build up
• Open time from 11/2 - 4 minutes • Set times from 15 - 120 seconds
1Measured on Brookfield viscometer with Thermosel using spindle #27.2The bonding range of a 1/8" bead of molten adhesive on a non-metallic substrate.3The minimum amount of time required between when the bond is made and when it will support a 5 psi tensileload.
4Open times and set times are based on a room temperature environment. High environmental temperatureslengthen open times and set times while lower temperatures will shorten open times and set times.
3M™ Scotch-Weld™
Polyurethane Reactive (PUR) Easy 250 Wood Adhesive EZ250015 • EZ250060 • EZ250120
1Measured on .090" - .110" thick bars.2ASTM D638, Die C, measured on .011" - .012" thick films cured for a minmum of 7 days at 77°F (25°C)/50%relative humidity (RH).
- 2 -
Directions for Use
Apply to clean, dry surfaces. Remove oil, grease and other contaminants by wiping withisopropyl alcohol.* For fiber reinforced plastics and other materials that are oftencontaminated with mold release agents, it is recommended that the surface be solventwiped, abraded and solvent wiped.* For additional information, see section on surfacepreparation. After heating to recommended application temperature, apply adequateamount of 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Wood Adhesiveto one of the substrates to be bonded. Join the substrates within the adhesives specifiedopen time and hold/fixture the bonded part until the adhesive has adequately set. Do notuse to bond metal or glass to itself or each other or cure will not occur due to low moisturevapor transmission of the substrate.
(Important: Adhesive heated at application temperature for more than 16 hoursshould be discarded.)
*Note: When using solvents, extinguish all ignition sources, including pilot lights, andfollow the manufacturer’s precautions and directions for use.
Dispensing Equipment
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Wood AdhesiveCartridges can only be dispensed through the 3M™ Scotch-Weld™ PolyurethaneReactive Adhesive Applicator or the 3M™ Scotch-Weld™ Polyurethane Reactive(PUR) Easy 250 Adhesive Applicator. Other container sizes can be dispensed throughbulk equipment specifically designed for use with hot melt polyurethane reactiveadhesives (PUR). For more information on PUR application equipment, contact yourlocal 3M sales representative. All equipment must be used in strict accordance with therecommendations of the manufacturer.
Warning: Do not use Scotch-Weld polyurethane reactive (PUR) easy 250 woodadhesive above 275°F (135°C) and should not be applied to substrates that exceed275°F (135°C).
Caution: Wear heat resistant gloves and safety glasses when handling.
Handling/CuringInformation
Typical CuredProperties
Note: The following technical information and data should be considered representative ortypical only and should not be used for specification purposes.
3M™ Scotch-Weld™ PUR Easy 250 Wood Adhesive
Property EZ250015 EZ250060 EZ250120
Shore D Hardness1 65 60 60
Tensile @ Break2 3,900 psi 4,200 psi 4,000 psi
Elongation @ Break2 750% 675% 625%
3M™ Scotch-Weld™
Polyurethane Reactive (PUR) Easy 250 Wood Adhesive EZ250015 • EZ250060 • EZ250120
- 3 -
Cleanup: Allow products to solidify. Remove uncured waxy material (usually within thefirst 20 minutes after application) by scraping with a putty knife or similar tool. For curedmaterial, remove by cutting or sanding. Do not use heat or flame to remove adhesive.
Cure Time: The cure rate will vary depending on air temperature, relative humidity,substrate type and bond line thickness. Cure rate is more rapid on wood (moisture richsubstrate) than on plastic.
Handling/CuringInformation(continued)
Overlap Shear Strength (psi), tested @ 73°F (23°C)
TypicalPerformanceCharacteristics
Note: The following technical information and data should be considered representative ortypical only and should not be used for specification purposes.
3M™ Scotch-Weld™ PUR Easy 250 Wood Adhesive
Substrate EZ250015 EZ250060 EZ250120
Maple 1,650 1,910 1,950
A. Overlap Shear Strength
Overlap shear (OLS) strengths were measured on 1" wide 1/2" overlap specimens. Thesebonds were made individually using 1" x 4" sample coupons. The thickness of the bondline was .003-.006".The thickness of the Maple, .375".The separation rate of the testing jaws was 2" per minute.
Overlap Shear Strength (psi), tested @180°F (82°C)
3M™ Scotch-Weld™ PUR Easy 250 Wood Adhesive
Substrate EZ250015 EZ250060 EZ250120
Maple 550 380 620
B. Typical Rate of Strength Build-Up
Maple Overlap Shear Strength (psi) tested @ 73°F (23°C) at various times after bonding.The Maple was conditioned for 7 days at 77°F (25°C)/50% RH prior to bonding.
3M™ Scotch-Weld™ PUR Easy 250 Wood Adhesive
Time EZ250015 EZ250060 EZ250120
10 minutes 980 1,210 1,105
60 minutes 1,650 1,725 1,805
24 hours 1,725 1,845 1,915
72 hours 1,690 1,830 1,975
7 days 1,650 1,910 1,950
The cure rate will vary depending on air temperature, relative humidity, substrate and bond line thickness. Cure rateis more rapid on wood (moisture-rich substrate) than on plastic.
3M™ Scotch-Weld™
Polyurethane Reactive (PUR) Easy 250 Wood Adhesive EZ250015 • EZ250060 • EZ250120
- 4 -
Typical PerformanceCharacteristics(continued)
Note: The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.
C. Cure Cycle
With the exception of rate of strength build-up, all bonds, unless otherwise noted,were cured for a minimum period of 7 days at 77°F (25°C)/50% RH beforetesting or subjecting to further conditioning or environmental aging. Bonds wereprepared using the suggested procedure for the particular substrate tested.
Surface Preparation All wood should be dry and free of contaminants such as sawdust, dirt or othersubstances that may interfere with the adhesive bonding process. If the surface to be bonded contains a coating or finish, bonds should be made and evaluated toensure proper adhesion. It may be necessary to evaluate other 3M™ Scotch-Weld™Polyurethane Reactive (PUR) Easy 250 Wood Adhesive products that are bettersuited to bond plastic surfaces.
Refer to Product Label and Material Safety Data Sheet for health and safety information before using thisproduct. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.
PrecautionaryInformation
All statements, technical information and recommendations contained in this document are based upontests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affectthe use and performance of a 3M product in a particular application, including the conditions underwhich the product is used and the time and environmental conditions in which the product is expected toperform. Since these factors are uniquely within the user’s knowledge and control, it is essential that theuser evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for theuser’s method of application.
Product Use
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individualproducts, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships theproduct. Individual products may have additional or different warranties as stated on product literature,package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OFDEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M productis fit for a particular purpose and suitable for user’s application. If the 3M product is defective within thewarranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, toreplace the product or refund the purchase price.
Warranty andLimited Remedy
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theoryasserted, including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.
ISO 9001:2000
Storage For maximum shelf life, store product at 60°F (16°C) to 80°F (27°C), indoors andprotected from exposure to moisture.
Shelf Life Products in 10 fluid ounce cartridges have 12 months while all others have a 6 monthshelf life in unopened containers.
3M and Scotch-Weld are trademarks of 3M.Printed in U.S.A.©3M 2007 78-9236-7137-0 (2/07)
Recycled Paper40% pre-consumer10% post-consumer
3Industrial BusinessIndustrial Adhesives and Tapes Division3M Center, Building 21-1W-10, 900 Bush AvenueSt. Paul, MN 55144-1000800-362-3550 • 877-369-2923 (fax)www.3M.com/industrial
Product Selection Guide
Matching 3M Structural Adhesives to your design, performance and process requirements
September 2020
In today’s world, successful new products demand advancements in design, manufacturing processes and end-use performance. Industrial engineering and design professionals around the world depend on 3M™ Scotch-Weld™ Structural Adhesives to help them design beyond the limits of mechanical fasteners to create next generation products.
We Help You Make It. Better.
Trusted innovations from aerospace to office spaceWith over 60 years of experience developing innovative structural adhesives for aerospace, automotive and hundreds of other industries, 3M delivers the solutions you can trust. Our advanced formulations create durable bonds, even on challenging materials or in extreme conditions.
3M global service and support3M supports our customers with the testing, technology, and training needed to create better products. Our world-wide support staff has the experience you can rely on for everything from structural adhesive selection to process improvement.
Leverage 3M’s proven selection of structural adhesives, deep industry expertise, and technical support to your advantage. Design with Confidence. Build to Last.
2
3M™ Scotch-Weld™ Structural Adhesives are transforming the way engineers think.
Freedom of Design: Join composites to metal, build with hard-to-bond plastics, and use thinner, lighter weight materials.
Improve Aesthetics: Improve product appearance with invisible joints and smoother bond lines, reduce weight and noise, enhance corrosion and fatigue resistance, and more.
The benefits of designing and building products with 3M™ Scotch-Weld™ Structural Adhesives help drive product success. Eliminating mechanical fasteners provides a wide range of benefits for all stages of product development.
Strong, Flexible Bonds: Adhesives bond and seal simultaneously, eliminate stress concentration and absorb shock and vibration for durable bonds.
Increased Durability: Resist chemicals, environment, galvanic corrosion, fatigue, and material separation along edges or corners.
Accurate and Easy: Dispense by hand or with automated equipment, and choose from a wide range of viscosities and flow rates.
Enhance Productivity: Reduce labor and material costs, build faster with minimal surface prep and match cure rates to your process needs.
Advancing design, process and performance
Design Solutions
Process Efficiencies
Performance Optimization
3
Simplifying Adhesive Decisions for Your ApplicationThe following questions will help you narrow adhesive choices to a few possibilities for evaluation.
Q: What materials will be bonded? A: Structural adhesives work by adhering to the top surface of the bonded parts, so it’s important to know the exact material and condition on those surfaces. For metals, will the adhesive be applied to bare metal, or will there be a paint or coating on the surface? For plastics, exactly which base resin? Could there be residual release agents on the surfaces used for mold release?
Q: What is the preferred cure speed?A: The chosen structural adhesive must have enough work life (open time, pot life) to allow proper mixing and application of the adhesive and assembling of the bonded parts. Smaller assemblies or shorter cycle time production processes may be able to use a faster curing adhesive with a work life of only five minutes or less, while larger assemblies that require alignment and clamping will probably need a work life of 20 minutes or more.
Q: What surface preparation will be required? A: Structural adhesives generally prefer clean, rough, dry surfaces for highest bond strength. This typically means either light abrasion and solvent cleaning of the surface, or solvent cleaning followed by chemical etching or applying a primer. Adhesion tests should be performed to determine the adequate surface preparation for a specific application.
Q: What types of joints are best for structural adhesives? A: Joint designs that put the adhesive bond under shear, tension, or compression forces will provide the highest strength. Designs that tend to apply peel or cleavage forces to the adhesive, where the applied stresses are not distributed over the entire bond area, will have lower bond strength, but the bond may still be sufficient for the needs of the application. In addition, optimum bond line thickness typically ranges from 0.005" to 0.020". The adhesive qualification process should always include testing of prototype assemblies to ensure the adhesive will provide enough performance.
Q: How are structural adhesives used and applied? A: Structural adhesives come in many forms, including low viscosity liquids and non-sag pastes, one- and two-component formulations, short and long work lives, and various package sizes and shapes. Most two-part structural adhesives are available in both bulk containers and convenient, easy-to-use cartridge mixing systems.
Q: What are the general characteristics of the different types of structural adhesives? A: All structural adhesives provide at least 1,000 psi of overlap shear strength to aluminum, but the different adhesive chemistries have various properties:
4
• Epoxy adhesives come in both two-part adhesives (that cure upon mixing the two components) and one-part adhesives (that cure with temperature). They generally have the highest strength and overall performance. They also provide the best resistance to high temperatures, solvents and outdoor weathering. They adhere well to metals, woods and concrete, and the flexible epoxy adhesives also bond to some plastics and rubbers. Epoxy adhesives usually require clean, abraded surfaces to obtain maximum bond strength.
• Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower than epoxy adhesives. However, they have several features that make them easier to use in many applications and manufacturing processes. These benefits include a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life, and some have much lower odor than regular acrylic adhesives.
• Urethane adhesives are two-part adhesives that are relatively flexible when cured, and therefore tend to have excellent impact resistance and good adhesion to most plastics. They also bond well to woods, concrete and rubbers, but they tend to have reduced resistance to solvents and high temperatures. Uncured adhesive components are sensitive to moisture.
• Cyanoacrylate adhesives (instant adhesives) are one-component, lower viscosity liquids that cure extremely quickly with just contact pressure and surface moisture. They adhere well, with thin bond lines, to plastics, metals and rubbers. With the use of primers, they can also adhere to low surface energy plastics and elastomers. They tend to have low flexibility, peel strength and impact resistance compared to other structural adhesives. They are generally used for applications such as gasket bonding and smaller assemblies.
• Anaerobic adhesives are one-part adhesives that cure on active metal surfaces when oxygen gets excluded from the bond line. These products keep your factory running efficiently, reducing maintenance and leakage. They do not bond well to glass, plastics or rubbers, and are primarily used for applications such as locking threads and sealing pipe connections.
• PUR adhesives (Polyurethane-reactive adhesives) are one-part adhesives that apply like a hot melt, but cure with ambient moisture for near structural strength bonds. Fast set times and build strength over the next 24-48 hours can reach as much as 1,000 psi in overlap shear strength. They are flexible and resistant to temperature extremes and most solvents. Most commonly used in bonds where at least one substrate contains or transmits moisture (such as wood or plastic).
Tensile
Tensile is pull exerted equally over the entire joint. Pull direction is straight and away from the adhesive bond.
Shear is pull directed across the adhesive, forcing the substrates to slide over each other.
Cleavage is pull concentrated at one edge of the joint, exerting a prying force on the bond. The other edge of the joint is theoretically under zero stress.
Peel is concentrated along a thin line at the edge of the bond where one substrate is flexible.
Shear
Cleavage
Peel
5
Signage Key Features & Benefits:• One adhesive to bond all of your substrates • Strong formulations and thin bond lines• Weather resistance • UL recognition
Key Products: DP8805NS, DP8405NS, DP100 Plus
Metalworking Key Features & Benefits:• High strength and durability • Reduced surface preparation before
bonding, and no grinding after bonding • Save weight and improve appearance
with adhesives instead of welds or rivetsKey Products: DP420NS Black, DP8407NS, DP8410NS
Key Markets & ApplicationsFor 3M™ Scotch-Weld™ Structural Adhesives
Sporting Goods Key Features & Benefits:• Excellent impact resistance of high
stressed bonds • High strength for small joints• High strength bonding of rubber, composites
and metals to each otherKey Products: DP420NS Black, DP8810NS, PR100, TS230
Specialty Vehicle Key Features & Benefits:• Weight reduction• High strength• Vibration & fatigue resistance
Key Products: DP6330NS, DP8410NS, LSB60NS, TL42
6
Aerospace Key Features & Benefits:• Available in UL94 or FST compliant
options • Strong, yet flexible bond lines Key Products: 2216 Gray, DP100FR, DP640, TL71
Plastic, Composite & Rubber Key Features & Benefits:• Bonding of low surface energy
plastics without priming • Impact resistant composite
bonding
Key Products: DP8010 Blue, DP420NS, DP6310NS, TS230, PR100
Electronics Key Features & Benefits:• Low halogen formulations available to
meet customer needs• Fast cure to speed production• Protect sensitive electrical connections
from the environment
Key Products: DP420LH, DP8805NS, TS230, PR100
Appliance Key Features & Benefits:• Simplify operations by bonding after powdercoating• Eliminate the challenge of bonding rigid to flexible
substrates• Noise damping• Reduce complexity-bond and seal glass to metal in
one stepKey Products: DP125 Gray, DP6310NS, DP8810NS, TS230, TL42
7
8
3M™ Scotch-Weld™ Adhesives Selector Guide
Structural Adhesive FamiliesRigid Epoxy Adhesives — Higher tensile strength at lower elongations for greater long-term holding power. Mostly used for rigid substrates (metals) with high static loads.
Flexible Epoxy Adhesives — Lower tensile strength at higher elongations for greater capability to withstand differential movement of bonded parts; higher peel strength and higher adhesion to most plastics.
Toughened Epoxy Adhesives — Higher tensile strength at lower elongations for fatigue resistance; best suited for dynamic stresses. They have long-term holding power, higher peel strength, and exceptional higher resistance against shock, vibration and impact loads. Lower adhesion to most thermoplastics.
Heat-cured Epoxy Adhesives — One-component, rigid adhesives with outstanding strength at elevated temperatures. These adhesives require a thermal cure, typically around 250-350°F (120-180°C) for 40-60 minutes.
MMA Acrylic Adhesives — Provides greater adhesion to a wide variety of materials including most plastics and paint systems, are tolerant of many surface contaminations. High impact resistance for metal bonds.
Low Odor Acrylic Adhesives — Less odor than typical acrylic adhesives and faster rate of strength build than most two-part structural adhesives. Excellent adhesion to a variety of materials, including plastics and paint systems. They provide high impact resistance for plastic bonds; and are tolerant of many surface contaminations.
LSE Acrylic Adhesives — Outstanding adhesion to polyolefin materials such as polypropylene, polyethylene and TPO without surface treatment.
Semi-rigid Urethane Adhesives — Higher tensile modulus and lower elongation capability, with greater long-term holding power.
Flexible Urethane Adhesives — Lower tensile modulus and higher elongation capability. Excellent adhesion to most plastics.
Instant Adhesive FamiliesPlastic & Rubber (PR) Instant Adhesives bond to the widest variety of materials, have an extremely fast cure speed, and come in a wide range of viscosity.
Surface Insensitive (SI) Instant Adhesives cure even on acidic surfaces (such as wood, paper, leather, and ceramic); these adhesives have a slower cure speed than traditional instant adhesives.
SUBSTRATE ATTRIBUTE KEY PRODUCT PRODUCT FAMILIES
PRO
DUCT
FAM
ILIE
S
K
EY P
RODU
CTS
AT
TRIB
UTE
SUB
STRA
TE
Polyolefins & low surface energy materials
High temperaturestrengthand solvent resistance
General purpose
Aluminum andStainless Steel
General purpose
All other metals
DP8010 Blue
2214RegularGray
DP420NS Black
DP420NS DP8805NS Green
PR100 DP8407NS
• LSE Acrylic• Plastic &
Rubber CA
• Low Odor Acrylic• MMA Acrylic• Flexible Epoxy• Flexible Urethane• Plastic PUR• Plastic &
Rubber CA
• MMA Acrylic• Low Odor Acrylic
• Plastic & Rubber CA• Flexible Epoxy
• Heat-cured Epoxy
• Toughened Epoxy
• Toughened Epoxy
• MMA Acrylic• Low Odor Acrylic
• Plastic PUR• Toughened CA
DP8410NS
RubberPlastics/Paints/Coatings Oily MetalsMetals
Step 1: Select Most Difficult Substrate Step 2: Determine Key Attribute Step 3: Select Product Family
*See chart in back of guide for more details.
9
Low Odor (LO) Instant Adhesives provide a reduced blooming effect for applications that require an improved appearance.
General Purpose (EC) Instant Adhesives are slightly less expensive products that have lower strength and impact resistance compared to traditional instant adhesives.
Super Fast (SF) Instant Adhesives provide the fastest rate of cure speed for most applications.
Rubber Toughened (RT) Instant Adhesives can be used for applications that require improved impact strength or vibration resistance; preferred for applications bonding two rigid materials together.
Metal (MC) Instant Adhesives provide improved performance on metal substrates.
Engineered Grade (EG) Instant Adhesives provide excellent overall performance for most applications.
Anaerobic Adhesive FamiliesThreadlockers (TL) hold screws and other threaded fasteners in place to prevent loosening from shock, vibration, and thermal expansion and contraction; these adhesives replace lock washers and nylon-insert nuts.
Retaining Compounds (RT) bond and seal non-threaded cylindrical metal assemblies, such as press-fit or slip-fit parts; these adhesives replace keys, splines, and set screws.
Pipe Sealants (PS) provide a pressure seal on threaded tubes and pipes; these adhesives replace various tapes and pastes.
Gasket Makers (GM) fill voids between metal parts to create a form-in-place gasket; these adhesives replace o-rings and pre-formed gaskets.
PUR Adhesive FamiliesWood PUR – Higher shear strength at lower elongations for long term holding power. Mostly used for rigid wood substrates and some plastics.
Plastic PUR – Higher impact strength, elongation and flexibility for greater capacity to withstand movement of bonded parts. Higher adhesion to most plastics, glass and aluminum.
SUBSTRATE ATTRIBUTE KEY PRODUCT PRODUCT FAMILIES
KEY PRODUCTS PRO
DUCT FAMILIES
SUBSTRATE ATTRIBUTE
Epoxy-based Outdoor variable temperature
Outdoor variable temperature
Fiberglass/SMC Indoor constant temperature
Indoor constant temperature
DP6310NS
DP420NSBlack
DP125 GrayDP8410NSGreen
DP420NS Black
DP270
• Toughened Epoxy
• Flexible Epoxy • Toughened CA
• Wood PUR• Rigid Epoxy• Flexible Epoxy • Semi-rigid Urethane • Surface Insensitive CA
• MMA Acrylic• Low Odor Acrylic
• Toughened Epoxy
• Plastic PUR• Toughened CA
• Flexible Epoxy • Flexible Urethane
• Toughened Epoxy
• Flexible Epoxy • Semi-rigid Urethane
• Flexible Urethane• Plastic PUR
2216 Gray
• Rigid Epoxy• Flexible Epoxy• Toughened Epoxy
• Plastic PUR
• Flexible Epoxy
Wood Electronics PottingComposites Concrete/Stone/Ceramics/Glass
TE100
Step 1: Select Most Difficult Substrate Step 2: Determine Key Attribute Step 3: Select Product Family Step 1: Select Most Difficult Substrate Step 2: Determine Key Attribute Step 3: Select Product Family
*See chart in back of guide for more details.
Substrate SelectorStep 1: Select Substrate Step 2: Determine Key Attribute Step 3: Select Product (see definitions below)
Plastic/Paints/Coatings Rubber Metals Oily Metals Composites Concrete/Stone/Ceramics/Glass Wood
LowSurfaceEnergy
General Purpose
Temperature and Solvent Resistant
Stainless Steel & Aluminum
Other Metals
Stainless Steel & Aluminum
Other Metals
Fiberglass/SMC
Epoxy Indoor Outdoor
LSE Acrylic* Plastic & Rubber CA
LSE Acrylic* Plastic & Rubber CA
Plastic & Rubber CA*
N/A LSE Acrylic LSE Acrylic LSE Acrylic LSE Acrylic LSE Acrylic Toughened CA*
LSE AcrylicToughened CA*
LSE Acrylic LSE Acrylic LSE Acrylic Surface Insensitive CA*
LSE Acrylic* Plastic & Rubber CA
LO Acrylic MMA Acrylic Plastic PUR Flexible Epoxy Plastic & Rubber CA
Plastic & Rubber CA* Plastic PUR
Toughened Epoxy Flexible Epoxy
LO Acrylic MMA Acrylic Flexible EpoxyPlastic PUR Plastic & Rubber CA
DP8407NSToughened Epoxy Flexible EpoxyPlastic PUR
Plastic & Rubber CA
LO Acrylic MMA Acrylic
DP8407NS Semi-rigid Urethane MMA AcrylicLO Acrylic FlexibleUrethanePlastic PUR Toughened CA
Semi-rigid Urethane MMA Acrylic Flexible Epoxy ToughenedEpoxyPlastic PUR Toughened CA
Flexible Epoxy Rigid Urethane Flexible UrethanePlastic PUR
Flexible Epoxy Flexible UrethanePlastic PUR
Wood PURFlexible Epoxy Rigid Urethane Surface Insensitive CA
Plastic & Rubber CA*
Plastic & Rubber CA*Plastic PUR
Plastic & Rubber CA*
N/A Flexible Epoxy Plastic PUR
Flexible Epoxy Plastic PUR
N/A N/A Plastic & Rubber CA*Plastic PUR
Plastic & Rubber CA*Plastic PUR
Flexible EpoxyPlastic PUR
Flexible EpoxyPlastic PUR
SurfaceInsensitive CA*Plastic PUR Flexible Epoxy
N/A Toughened Epoxy Flexible Epoxy
N/A Toughened Epoxy Flexible Epoxy
Toughened Epoxy Flexible Epoxy
One-part Heat-cured Epoxy Toughened Epoxy
Heat-cured Epoxy
Heat-cured Epoxy
Toughened Epoxy Flexible EpoxyPlastic PUR
Toughened Epoxy Flexible EpoxyPlastic PUR
Toughened Epoxy Flexible Epoxy
Flexible Epoxy
Toughened Epoxy Plastic PUR Flexible Epoxy
LSE Acrylic LO Acrylic MMA Acrylic Flexible Epoxy Plastic PUR Plastic & Rubber CA
Plastic & Rubber CA*Plastic PUR
Toughened Epoxy Flexible Epoxy
LO Acrylic MMA Acrylic Toughened Epoxy Flexible Epoxy Rigid Epoxy Toughened CA
Heat-cured Epoxy Toughened Epoxy
LO Acrylic MMA Acrylic
DP8407NS Heat-cured Epoxy
Semi-rigid UrethaneMMA Acrylic LO Acrylic Toughened EpoxyPlastic PUR Toughened CA
Semi-rigid UrethaneToughened Epoxy MMA Acrylic LO AcrylicPlastic PUR Toughened CA
Toughened Epoxy Flexible Epoxy
Flexible Epoxy
Plastic PURToughened Epoxy Rigid Epoxy Flexible Epoxy SurfaceInsensitive CA
LSE Acrylic DP8407NS Toughened Epoxy Flexible EpoxyPlastic PUR Plastic & Rubber CA
Plastic & Rubber CA*Plastic PUR
Heat-cured Epoxy Toughened Epoxy
Heat-cured Epoxy Toughened Epoxy
Toughened Epoxy Flexible EpoxyHeat-cured EpoxyDP810
DP8407NS Heat-cured Epoxy
DP8407NS Heat-cured Epoxy
Semi-rigid UrethaneToughened EpoxyFlexible EpoxyPlastic PUR
Toughened Epoxy Flexible EpoxyHeat-cured EpoxyPlastic PUR
Toughened Epoxy Heat-cured Epoxy
Flexible Epoxy
Plastic PURToughened Epoxy
LSE Acrylic LO AcrylicMMA Acrylic
N/A Heat-cured Epoxy
LO AcrylicMMA Acrylic
DP8407NSHeat-cured Epoxy
LO Acrylic MMA Acrylic
DP8407NS MMA Acrylic LO Acrylic
MMA AcrylicLO AcrylicHeat-cured Epoxy
N/A N/A N/A
LSE Acrylic DP8407NS N/A Heat-cured Epoxy
DP8407NSHeat-cured Epoxy
DP8407NS Heat-cured Epoxy
DP8407NS DP8407NS Heat-cured Epoxy
DP8407NS Heat-cured Epoxy
N/A N/A N/A
LSE AcrylicToughenedCA*
Semi-rigid UrethaneMMA Acrylic LO AcrylicFlexibleUrethanePlastic PUR Toughened CA
Plastic & Rubber CA*Plastic PUR
ToughenedEpoxyFlexible EpoxyPlastic PUR
Semi-rigid Urethane MMA Acrylic LO AcrylicToughenedEpoxyPlastic PUR Toughened CA
Semi-rigid Urethane ToughenedEpoxyFlexible EpoxyPlastic PUR
MMA Acrylic LO Acrylic
DP8407NS Semi-rigid Urethane MMA Acrylic LO Acrylic Toughened Epoxy Flexible EpoxyPlastic PUR Toughened CA
Semi-rigid Urethane Toughed Epoxy Flexible EpoxyPlastic PUR Toughened CA
Semi-rigid Urethane Toughened Epoxy Flexible EpoxyPlastic PUR
Semi-rigid Urethane Flexible Epoxy Flexible UrethanePlastic PUR
Semi-rigid Urethane Toughened Epoxy Rigid Urethane Flexible EpoxyPlastic PUR
LSE AcrylicToughenedCA*
Semi-rigid UrethaneMMA Acrylic Flexible Epoxy ToughenedEpoxyPlastic PUR Toughened CA
Plastic & Rubber CA*Plastic PUR
ToughenedEpoxyFlexible EpoxyPlastic PUR
Semi-rigid UrethaneToughenedEpoxyMMA Acrylic LO AcrylicPlastic PUR Toughened CA
ToughenedEpoxyFlexible EpoxyHeat CuredEpoxyPlastic PUR
MMA Acrylic LO Acrylic Heat CuredEpoxy
Heat CuredEpoxy
Semi-rigid UrethaneToughenedEpoxyFlexible EpoxyPlastic PUR ToughenedCA
Toughened Epoxy Flexible EpoxyPlastic PUR Toughened CA
Semi-rigid UrethaneToughened Epoxy Flexible EpoxyPlastic PUR
Semi-rigid UrethaneFlexible EpoxyPlastic PUR
Semi-rigid UrethaneToughened Epoxy Flexible EpoxyPlastic PUR
LSE Acrylic Flexible EpoxyRigid Urethane Flexible UrethanePlastic PUR
Flexible EpoxyPlastic PUR
ToughenedEpoxyFlexible Epoxy
ToughenedEpoxyFlexible Epoxy
ToughenedEpoxyHeat Cured Epoxy
N/A N/A Semi-rigid UrethaneToughenedEpoxyFlexible EpoxyPlastic PUR
Semi-rigid UrethaneToughenedEpoxyFlexible EpoxyPlastic PUR
Toughened Epoxy Flexible Epoxy Rigid Urethane Flexible Urethane
Flexible Epoxy Flexible Urethane
Flexible Epoxy Plastic PUR Flexible Urethane
LSE Acrylic Flexible Epoxy Flexible UrethanePlastic PUR
Flexible EpoxyPlastic PUR
Flexible Epoxy
Flexible Epoxy
Flexible Epoxy
N/A N/A Semi-rigid UrethaneFlexible EpoxyFlexible UrethanePlastic PUR
Semi-rigid UrethaneFlexible EpoxyPlastic PUR
Flexible EpoxyFlexible Urethane
Flexible Epoxy Flexible Urethane
Flexible Epoxy Plastic PUR Flexible Urethane
LSE AcrylicSurface InsensitiveCA*
Wood PURFlexibleEpoxyRigid Urethane SurfaceInsensitive CA
Plastic PURSurface InsensitiveCA*
Toughened Epoxy Plastic PUR FlexibleEpoxy
Plastic PURToughened EpoxyRigid EpoxyFlexibleEpoxySurfaceInsensitive CA
Plastic PUR Toughened Epoxy
N/A N/A Semi-rigid UrethaneToughened EpoxyRigid UrethaneFlexible EpoxyPlastic PUR
Semi-rigid UrethaneToughened EpoxyFlexibleEpoxyPlastic PUR
FlexibleEpoxyPlastic PUR FlexibleUrethane
FlexibleEpoxyPlastic PUR FlexibleUrethane
Wood PURRigid Epoxy Toughened EpoxyRigid Urethane SurfaceInsensitive CA
Plas
tic/P
aint
s/C
oatin
gs
LowSurfaceEnergy
General Purpose
Rubb
erM
etal
s
Temperature and Solvent Resistant
Stainless Steel & Aluminum
Other Metals
Oily
Met
als
Stainless Steel & Aluminum
Other Metals
Com
posi
tes
Fiberglass/SMC
Epoxy
Conc
rete
/Sto
ne/C
eram
ics/G
lass Indoor
Outdoor
W
ood
BEST IN CLASS PRODUCT SUGGESTED ALTERNATE PRODUCT *with primer
10
Step 1: Select Substrate Step 2: Determine Key Attribute Step 3: Select Product (see definitions below)
Approximate Coverages for 3M™ Scotch-Weld™ Adhesives in Duo-Pak Cartridges
Bead SizeDimension*inches/mm
Linear ft/mper 37 mL(2:1 Cart.)
Linear ft/mper 43 mL(2:3 Cart.)
Linear ft/mper 45 mL(10:1 Cart.)
Linear ft/mper 50 mL(1:1 & Cart.)
Linear ft/mper 200 mL(1:1 & 2:1 Cart.)
Linear ft/mper 400 mL(1:1 & 2:1 Cart.)
Linear ft/mper 490 mL(10:1 Cart.)
Linear ft/mper 295 mL(1/10 gal. Cart.)
1/2 in (12.7 mm) 2 ft (0.6 m) 2 ft (0.7 m) 2 ft (0.7m) 2.5 ft (0.8 m) 10 ft (3 m) 21 ft (6 m) 26 ft (8 m) 20 ft (6 m)
3/8 in (9.5 mm) 3.5 ft (1 m) 4 ft (1 m) 4 ft (1 m) 4.5 ft (1 m) 18 ft (6 m) 37 ft (11 m) 45 ft. (14 m) 35 ft (11 m)
1/4 in (6.4 mm) 8 ft (2 m) 9 ft (3 m) 9 ft (3 m) 11 ft (3 m) 41 ft (13 m) 83 ft (25 m) 102 ft (31 m) 79 ft (24 m)
1/8 in (3.2 mm) 31 ft (9 m) 36 ft (11 m) 37 ft (11 m) 42 ft (13 m) 165 ft (50 m) 331 ft (101 m) 405 ft (123 m) 312 ft (95 m)
1/16 in (1.6 mm) 122 ft (37 m) 142 ft (43 m) 147 ft (45 m) 165 ft (50 m) 656 ft (200 m) 1,313 ft (400 m) 1,600 ft (488 m) 1,234 ft (376 m)
Coverages per Gallon for Various Thicknesses of 100% Solids 3M Adhesives
Coverages per Gallon for Various Bead Sizes of 100% Solids 3M Adhesives
* Bead size is semi-circular bead with width equal to size noted and height at center of bead equal to 1/2 the width.
NOTE: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes.
Wet Thicknessinches/mm Ft2/gal (m2/liter) Gal/1,000 ft2
(liter/1,000 m2)
1/2 in (12.7 mm) 3 ft2 (0.1 m2) 312 gal (12,700 liter)
1/8 in (3.2 mm) 13 ft2 (0.3 m2) 78 gal (3,175 liter)
1/16 in (1.6 mm) 26 ft2 (0.6 m2) 39 gal (1,587 liter)
1/32 in (0.8 mm) 51 ft2 (1 m2) 20 gal (794 liter)
25 mils (0.64 mm) 64 ft2 (1.5 m2) 16 gal (635 liter)
5 mils (0.13 mm) 320 ft2 (8 m2) 3 gal (127 liter)
Bead Size Dimension*inches/mm
Approx. lineal ft/gal (m/liter)
Approx. gal/1,000 lineal ft(liter/1,000 m)
1/2 in (12.7 mm) 196 ft (16 m) 5 gal (63 liter)
3/8 in (9.5 mm) 350 ft (28 m) 3 gal (36 liter)
1/4 in (6.4 mm) 785 ft (63 m) 1.3 gal (16 liter)
1/8 in (3.2 mm) 3,130 ft (252 m) 0.3 gal (4 liter)
1/16 in (1.6 mm) 12,420 ft (1,000 m) 0.1 gal (1 liter)
3M™ Scotch-Weld™ Structural Adhesives
Coverage Guide
11
Approximate coverage per container (linear foot per container based on 1/8" dia. bead size)
1/10 Gallon Cartridge 2 Kilo Bag 5 Gallon Pail 55 Gallon Drum
250'(76.2m)
1,650'(502.9m)
13,500'(4144.8m)
170,200'(51876.9m)
Coverage for 3M™ Scotch-Weld™ PUR Adhesives
*
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-67°F
(-55°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at
75°F (2
4°C) (c
P)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
3M™ Scotch-Weld™ Rigid Epoxies
DP100100(Clear)
General purposeRigid bonds
1:1 13,000 5 minutes 20 minutes 2 (4) 900 (6) 1,500 (10) 300 (2) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08994-100-021200-87260-000-021200-87261-700-021200-82345-900-021200-82344-2
71001487637100075490700012131871000865577100086558
DP100FR 100FR (Off-White)
Flame retardant UL94 V-0 rating
1:1 80,000 6 minutes 20 minutes 2 (4) 1,250 (9) 2,200 (15) 800 (6) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08989-7 00-048011-56744-0 00-048011-56743-3 00-048011-57230-7 00-048011-57229-1
71001487607000148268700002857770103661587010366123
DP100NS 100NS (Translucent)
General purpose Non-sag
1:1 95,000 5 minutes 20 minutes 2 (4) 900 (6) 1,500 (10) 300 (2) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08974-3 00-021200-87264-8 00-021200-87265-5 00-021200-82257-5 00-021200-82256-8
71001487447100014024710008255470103674127010295308
DP270 270 (Black)
Rigid potting compound Non-corrosive
1:1 12,000 60 minutes 3 hours 2 (4) 1,200 (8) 2,500 (17) 300 (2) 48.5mL 200mL 400mL Gallon kit 5 gal. pail A 5 gal. pail B
00-638060-08975-0 00-021200-87836-7 00-021200-87837-4 00-021200-82263-6 00-021200-82265-0 00-021200-82264-3
710014874570001212527100082565700012125370000464637000046439
DP270 270 (Clear)
Rigid potting compound Non-corrosive
1:1 12,000 60 minutes 3 hours 2 (4) 1,200 (8) 2,500 (17) 300 (2) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08973-6 00-021200-87834-3 00-021200-87835-0 00-021200-82251-3 00-021200-82250-6
71001487304000009361710007714370000285757000028567
1751 B/A (Gray)
Excellent void filler Rigid bonds
3:2 700,000 45 minutes 10 hours 4 (7) 1,400 (10) 2,000 (14) 500 (3) 2 oz. tube kit Pint kit Quart kit Gallon kit 5 gal. pail A 5 gal. pail B
00-021200-20100-4 00-021200-20101-1 00-021200-20103-5 00-021200-20105-9 00-021200-20108-0 00-021200-20120-2
700012121170000463367000046337700004633970103097277010367210
1838 B/A (Green)
Multi-purpose Rigid bonds
4:5 400,000 60 minutes 8 hours 4 (7) 1,500 (10) 3,000 (21) 500 (3) 2 oz. tube kitPint kit Quart kit Gallon kit 5 gal. pail A 5 gal. pail B
00-021200-20148-6 00-021200-20150-9 00-021200-20152-3 00-021200-20154-7 00-021200-20160-8 00-021200-20155-4
700000081070102952957000046340700012121270103097287010367213
1838L B/A (Translucent)
Multi-purpose Rigid bonds
1:1 10,000 60 minutes 8 hours 4 (7) 2,000 (14) 2,500 (17) 300 (2) 2 oz. tube kitQuart kit 5 gal. pail A 5 gal. pail B
00-021200-22645-8 00-021200-22646-5 00-021200-82635-1 00-021200-82634-4
7010367467700003622470103661577010330215
2158 B/A (Gray)
Multi-purpose Rigid bonds
1:1 375,000 2 hours 10 hours 3 (5) 1,500 (10) 2,000 (14) 400 (3) Pint kit Quart kit Gallon kit 5 gal. pail A 5 gal. pail B
00-021200-20258-2 00-021200-20260-5 00-021200-20262-9 00-021200-20269-8 00-021200-20264-3
70103097317000046348701033006070000463507000046349
3501 B/A (Gray)
Multi-purpose Rigid bonds
1:1 500,000 7 minutes 25 minutes 4 (7) 1,500 (10) 2,400 (16) 300 (2) 2 oz. tube kit 400mLPint kit Gallon kit55 gal. drum A 55 gal. drum B
00-021200-20842-3 00-021200-45184-300-021200-20843-0 00-021200-20846-100-051111-091640-700-051111-91639-1
700004647670103674607100010271701036746170102927107010367462
For lead times on bulk adhesives, please contact your 3M representative.
12
KEY
PRO
DUC
TKE
Y PR
OD
UCT
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
DP100 Plus 100 Plus (Clear)
Very flexible Colorless
1:1 8,500 4 minutes 20 minute 55 (98) 3,000 (21) 3,500 (24) 200 (1) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08976-7 00-021200-87266-2 00-021200-87267-9 00-021200-87198-6 00-021200-87197-9
71001487507100069498700012125571000460207100084539
DP105 105 (Clear)
Very flexible Colorless
1:1 6,500 5 minutes 20 minute 50 (89) 3,500 (24) 2,000 (14) 150 (1) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08981-1 00-021200-87270-9 00-021200-87271-6 00-021200-87206-8 00-021200-87205-1
71001487337010309884710007678670000008567000000850
DP110 110 (Gray)
General purpose Flexible bonds
1:1 55,000 8 minutes 20 minute 40 (71) 2,700 (19) 3,500 (24) 250 (2) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08990-3 00-021200-87274-7 00-021200-87275-4 00-021200-82472-2 00-021200-82471-5
71001487777000121312710000958170102993627010299357
DP110 110 (Translucent)
General purpose Flexible bonds
1:1 50,000 8 minutes 20 minute 40 (71) 2,500 (17) 2,500 (17) 200 (1) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08993-4 00-021200-87846-6 00-021200-87847-3 00-021200-82467-8 00-021200-82466-1
71001487627000148270700014826970103661637010366143
DP125 125 (Gray)
High performance Very flexible bonds
1:1 52,500 25 minutes 2.5 hours 90 (160) 3,400 (23) 4,300 (30) 400 (3) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08985-900-021200-87844-2 00-021200-87845-9 00-021200-87218-1 00-021200-87217-4
71001487357000121264710007672771000845887100084538
DP125 125 (Translucent)
High performance Very flexible bonds
1:1 15,000 25 minutes 2.5 hours 85 (151) 4,000 (28) 2,500 (17) 150 (1) 48.5mL 200mL 400mL
00-638060-08983-5 00-021200-87842-8 00-021200-87843-5
710014873471000254197000121262
DP190 (Translucent)
High performance Flexible bonds
1:1 10,000 80 minutes 6 hours 60 (107) 3,500 (24) 1,200 (8) 150 (1) 48.5mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08980-4 00-021200-87838-1 00-021200-87839-8 00-638060-40468-3 00-638060-40467-6
710014875270001212607010329707 71002188367100218835
DP190 (Gray)
High performance Slightly flexible bonds
1:1 80,000 90 minutes 10 hours 50 (89) 1,500 (10) 2,500 (17) 400 (3) 48.5mL 200mL 400mL
00-638060-08992-7 00-021200-87840-4 00-021200-87841-1
701041043870001213147100076722
2216 B/A (Gray)
High performance Very flexible bonds
2:3 80,000 90 minutes 10 hours 50 (89) 3,000 (21) 3,200 (22) 400 (3) 43mL Duo-Pak 2 oz. tube kitPint kit Quart kit Gallon kit 5 gal. pail A 5 gal. pail B 55 gal. drum A 55 gal. drum B
00-021200-56659-200-021200-20351-0 00-021200-20354-1 00-021200-20356-5 00-021200-20358-9 00-021200-20365-7 00-021200-20360-2 00-021200-20366-4 00-021200-20361-9
700004635770000008127000046358700000081570000008167000046361700004636071001663187100166319
2216 B/A (Translu-cent)
General purpose Very flexible bonds
1:1 10,000 2 hours 14 hours 70 (125) 3,000 (21) 1,700 (12) 140 (1) 2 oz. tube kitPint kit Quart kit Gallon kit 5 gal. pail A 5 gal. pail B 55 gal. drum A 55 gal. drum B
00-021200-20851-500-021200-20852-2 00-021200-20854-6 00-021200-20856-0 00-021200-64981-3 00-021200-64980-6 00-021200-20927-7 00-021200-20859-1
70000464797010310194700000086170000464807000046494700012130770103302407010367466
2216NS B/A (Tan)
High performance Non-sag
2:3 350,000 2 hours 10 hours 50 (89) 2,000 (14) 2,500 (17) 400 (3) 5 gal. pail A 5 gal. pail B
00-021200-87180-1 00-021200-87179-5
70103674147010309882
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-67°F
(-55°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at
75°F (2
4°C) (c
P)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
*
For lead times on bulk adhesives, please contact your 3M representative.
*
3M™ Scotch-Weld™ Flexible Epoxies
13
KEY
PROD
UCT
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-67°F
(-55°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at
75°F (2
4°C) (c
P)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
3M™ Scotch-Weld™ Toughened Epoxies
DP405405 (Black)
Tough durable bonds High impact resistance
2:1 40,000 4 minutes 15 minutes 40 (71) 4,500 (31) 4,500 (31) 600 (4) 50mL 400mL5 gal. pail A 5 gal. pail B
00-638060-08971-200-051111-07699-600-051111-07708-5 00-051111-07707-8
7100148728701036594370103010417010329549
DP420 420 (Black)
Tough durable bonds High impact resistance
2:1 30,000 20 minutes 2 hours 75 (133) 4,500 (31) 4,500 (31) 1,250 (9) 50mL 200mL 400mLGallon Kit 5 gal. pail A 5 gal. pail B55 gal. drum A 55 gal. drum B
00-638060-08966-8 00-021200-41530-2 00-021200-41529-600-051115-25796-4 00-021200-41532-6 00-021200-41531-900-021200-41534-000-021200-41533-3
71001487317100007956710007714870000463817000000834700000082770103659677010309750
DP420 420 (Off-White)
Tough durable bonds High impact resistance
2:1 30,000 20 minutes 2 hours 70 (125) 4,500 (31) 4,500 (31) 450 (3) 50mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08978-1 00-021200-87832-9 00-021200-87833-6 00-021200-82239-1 00-021200-82238-4
71001487367100077136710000251671000011447100001145
DP420LH420LH (Off-White)
Tough durable bonds Low halogen
2:1 30,000 20 minutes 2 hours 70 (125) 4,500 (31) 4,500 (31) 1,250 (9) 200mL400mL
00-051111-07697-200-051111-07696-5
70103295507100075336
DP420NS 420NS (Black)
Tough durable bonds Non-sag
2:1 180,000 20 minutes 2 hours 60 (107) 4,500 (31) 4,500 (31) 1,250 (9) 50mL 200mL400mL 5 gal. pail A 5 gal. pail B 55 gal. drum A 55 gal. drum B
00-638060-08987-3 00-021200-39286-300-021200-39287-000-021200-31309-7 00-021200-56587-8 00-048011-58133-0 00-048011-58132-3
7100148758710003694371000106807000000857700000085371001603527100160334
DP460 460 (Black)
Tough durable bonds
2:1 30,000 60 minutes 4 hours 80 (142) 4,500 (31) 4,500 (31) 700 (5) 5 gal. pail A 5 gal. pail B
00-021200-25319-500-021200-25318-8
70001212717000121265
DP460 460 (Off-White)
Tough durable bonds
2:1 30,000 60 minutes 4 hours 80 (142) 4,500 (31) 4,500 (31) 700 (5) 50mL 200mL 400mL Quart kit 5 gal. pail A 5 gal. pail B55 gal. drum A 55 gal. drum B
00-638060-08998-9 00-021200-87830-5 00-021200-87831-2 00-021200-82226-1 00-021200-82228-5 00-021200-82227-800-021200-83757-9 0-00-76308-14623-8
71001487687000121321710008256370000008747000000876700000087570103661657100153215
DP460NS 460NS (Off-White)
Tough durable bonds Non-sag
2:1 125,000 60 minutes 4 hours 70 (125) 4,900 (34) 4,650 (32) 1,350 (9) 50mL 200mL 400mL 5 gal. pail A 5 gal. pail B
00-638060-08968-2 00-021200-43671-0 00-021200-43672-7 00-021200-43674-1 00-021200-43673-4
71001487517100069441710007667770103295657010301036
LSB60 (Gray)
Tough durable bonds High impact resistance
1:1 30,000 90 minutes 10 hours 15 (27) 3,400 (23) 4,500 (31) 900 (6) 400mL5 gal. pail A 5 gal. pail B 55 gal. drum A 55 gal. drum B
00-051115-63411-600-051115-63416-1 00-051115-63414-700-051115-63418-5 00-051115-63417-8
70000464877010310209701036613870103661627010310202
LSB60NS (Gray)
Tough durable bondsNon-sag High impact resistance
1:1 180,000 90 minutes 10 hours 30 (53) 3,800 (26) 4,500 (31) 800 (6) 400mL5 gal. pail A 5 gal. pail B 50 gal. drum A 50 gal. drum B
00-051115-63426-000-051115-63428-4 00-051115-63427-706-38060-40269-606-38060-40270-2
70000464917100079533710007953471001983607100198390
LSB360NS(Green)
Tough durable bondsNon-sagExtra long work lifeBonds oily metals
1:1 Paste 10 hours 16 hours 30 (53) 4,000 (28) 3,900 (27) 800 (6) 400mL55 gal. drum A 55 gal. drum B
00-051111-64291-300-051115-64360-600-051115-64391-0
701036613970103302437010299359
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
14
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-67°F
(-55°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at
75°F/24°C
(cP)
Stock #
Overlap Shear: psi (MPa)
*
3M™ Scotch-Weld™ Heat-Cured Epoxies
1386 (Cream)
High temperature strength Impact resistance
150,000 60 350 (177)
10 (18) 3,000 (2 1) 5,500 (38) 4,500 (31) 2,500 (17) 1 quart 00-021200-19917-2 7000046326
1469 (Cream)
High temperature strength Low viscosity
60,000 120 350 (177)
2 (4) 3,150 (22) 3,700 (26) 3,700 (26) 3,600 (25) 1 quart 5 gal. pail
00-021200-19949-3 00-021200-19950-9
70000463287100056050
2214 Hi-Den-sity (Gray)
High temperature strength Low temp curing
Paste 40 250 (121) 5 (9) 3,000 (2 1) 4,500 (31) 4,500 (31) 1,700 (12) 6 oz. cart.5 gal. pail
00-021200-20813-3 00-021200-20814-0
70000212897010367423
2214 Hi-Temp New Formula (Gray)
High temperature strength Environmental resistance
Paste 60 250 (121) 2 (4) 2,800 (19) 2,800 (19) 2,800 (19) 2,500 (17) 6 oz. cart.5 gal. pail
00-021200-20833-1 00-021200-20835-5
70000464747010330200
2214 Hi-Temp Original (Gray)
High temperature strength Environmental resistance
Paste 40 250 (121) 2 (4) 2,000 (14) 2,000 (14) 3,000 (2 1) 2,500 (17) 6 oz. cart. 00-021200-20806-5 7000121274
2214 Non-Metallic Filled (Cream)
High temperature strength Higher insulation value
Paste 40 250 (121) 7 (12) 3,000 (2 1) 4,000 (28) 4,500 (31) 1,500 (10) 2 oz. tube6 oz. cart.
00-021200-20802-700-021200-25496-3
71000349907000121273
2214 Regular (Gray)
High temperature strength Low temp curing
Paste 40 250 (121) 5 (9) 3,000 (2 1) 4,500 (31) 4,500 (31 ) 1,500 (10) 6 oz. cart. 1 quart 5 gal. pail
00-021200-20344-2 00-021200-20345-9 00-021200-23047-3
700000081170000463567100111206
2290 (Amber)
Low solids liquid coating for metal laminations
60 30 350 (177) 5 (9) 5,000 (34) 5,000 (34) 3,500 (24) 1,200 (8) Gallon cont. 5 gal. pail 55 gal. drum
00-021200-76225-3 00-021200-76227-7 00-021200-76228-4
700000089771001448957100144896
6101 (Off White)
Excellent impact resistance, low temp cure
30,000 20 140 (60) N/A N/A N/A N/A N/A 30 mL cart. 00-638060-40406-5 7100208553
Cure Conditions
Time(m
in.)
Temp.
F (C)
250°F(12
1°C)
3M™ Scotch-Weld Epoxy Adhesive DP100 Plus is a very flexible, fast-setting, two-part epoxy adhesive that cures clear and colorless. It provides a strong, permanent bond, even under vibration and impact and is flexible when cured, making it a good choice for bonding dissimilar surfaces.
3M™ Scotch-Weld™
Epoxy Adhesive DP100 Plus
Key Feature
s
Product
Size UPCDry tim
e
(88°C
)
Viscosit
y
Stock #
3M™ Scotch-Weld™ Primer
Metal Primer 3901
Improves metal and glass adhesion and increases environmental resistance
5 Red 1 hour 30 minutes .5 pint 62390135259 7000000907
ColorDry
time
(24°C
-33°C
)
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
3M’s Threadlocker Adhesives offer a range of products including temporary, permanent and high temperature resistance. These adhesives conform to most industry recognized standards for torque and strength. TL42, TL62, TL71, TL90
3M™ Scotch-Weld™ Threadlockers
15
KEY
PROD
UCT
KEY
PROD
UCT
KEY
PROD
UCT
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-20°F
(-29°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at
75°F (2
4°C) (c
P)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
3M™ Scotch-Weld™ Standard MMA Acrylics
DP805 (Off-White)
Fast strength build Minimal surface prep
1:1 110,000 3 minutes 10 minutes 35 (62) 2,500 (17) 3,500 (24) 2,200 (15) 48.5mL 200mL
00-638060-08982-8 00-021200-87828-2
70104104367010367390
DP820 (Light Yellow)
Tough durable bonds Minimal surface prep
1:1 55,000 15 minutes 40 minutes 20 (36) 3,100 (21) 3,150 (22) 1,900 (13) 48.5mL 200mL 400mL
00-638060-08977-4 00-021200-89348-3 00-021200-89349-0
701041219470103297047000121258
DP8405NS8405NS (Green)
High impact Adhesion to most plastics
10:1 70,000 5 minutes 15 minutes 50 (89) 2,600 (18) 4,100 (28) 900 (6) 45mL490mL1 gal. pail A 5 gal. pail B 5 gal. pail A55 gal. drum B
00-051115-68963-500-051115-68964-200-051115-68981-9 00-051115-68986-4 00-051115 -68980-2 00-051115-68987-1
710000968871000110567100102180710002743071001015067100084534
DP8407NS8407NS(Gray)
High impact Adhesion to most plastics
10:1 20,000 7 minutes 24 minutes 50 (89) 3,400 (23) 4,500 (31) 1,400 (10) 45mL490mL1 gal. pail A 5 gal. pail B 5 gal. pail A 55 gal. drum B
00-638060-14631-600-638060-14643-900-638060-14658-3 00-076308-86306-7 00-638061-14659-000-076308-98878-4
710017948271001794807100179264710010538471001794427100104987
DP8410NS8410NS (Green)
High impact Adhesion to most plastics
10:1 70,000 10 minutes 25 minutes 50 (89) 3,600 (25) 4,100 (28) 800 (6) 45mL490mL1 gal. pail A 5 gal. pail B 5 gal. pail A 55 gal. drum B
00-051115-70994-400-051115-70995-100-051115-68981-9 00-051115-70997-5 00-051115-68980-200-051115-71101-5
710002405571000240457100102180710006483071001015067100084532
DP8425NS8425NS(Green)
High impact Adhesion to most plastics
10:1 70,000 25 minutes 50 minutes 50 (89) 3,800 (26) 3,700 (26) 800 (6) 45mL490mL1 gal. pail A5 gal. pail B 5 gal. pail A 55 gal. drum B
00-051115-81303-000-051115-81302-300-051115-68981-900-051115-81298-9 00-0511115-81414-300-051115-81031-6
710007816571000781667100102180701041504871001015067100084535
Low Odor Acrylic
DP810 810 (Black)
Tough durable bondHigh impact resistance
1:1 20,000 10 minutes 20 minutes 30 (53) 1,200 (8) 3,600 (25) 500 (3) 48.5mL200mL1 gallon pail A1 gallon pail B4.4 gal. pail A4.4 gal. pail B
00-638060-08967-500-021200-49079-800-048011-56712-9 00-048011-56711-200-021200-49081-1 00-021200-49080-4
710014873271001428487000046401700004638570103659697010329544
DP810 810 (Tan)
Tough durable bonds High impact resistance
1:1 20,000 10 minutes 20 minutes 30 (53) 1,200 (8) 3,600 (25) 500 (3) 48.5mL 200mL 400mL 4.4 gal. pail A 4.4 gal. pail B
00-638060-08986-6 00-021200-31311-0 00-021200-31312-7 00-021200-45233-8 00-021200-45230-7
71001487577000121267700012126671000774507100077451
DP810NS 810NS (Tan)
Tough durable bonds Non-sag
1:1 95,000 10 minutes 20 minutes 20 (36) 1,200 (8) 4,000 (28) 500 (3) 48.5mL 200mL 400mL 4.4 gal. pail A 4.4 gal. pail B
00-638060-08969-9 00-021200-49084-2 00-021200-49083-5 00-638060-14110-6 00-021200-49085-9
710014874871000693657100069366 7100160337 7000121240
DP8805NS8805NS (Green)
Low odor Fast rate of strength build
10:1 80,000 5 minutes 10 minutes 30 (53) 800 (5) 3,600 (25) 900 (6) 45mL490mL1 gal. pail A 5 gal. pail B 5 gal. pail A 55 gal. drum B
00-076308-98433-500-076308-98439-700-051115-81415-000-076308-98440-3 00-051115-81414-300-076308-98441-0
710009863171000976367100102180710009769371001015067100097673
DP8810NS8810NS (Green)
Low odor Fast rate of strength build
10:1 80,000 10 minutes 20 minutes 30 (53) 900 (6) 3,600 (25) 800 (6) 45mL490mL1 gal. pail A 5 gal. pail B 5 gal. pail A 55 gal. drum B
00-051128-99432-000-051128-99431-300-051115-81415-000-076308-98442-7 00-051115-81414-300-076308-98443-4
710009757471000754097100102180710009770471001015067100097626
DP8810NS(Gray)
Low odor Fast rate of strength build
10:1 80,000 10 minutes 20 minutes 30 (53) 900 (6) 3,600 (25) 800 (6) 45mL490mL
00-076308-86152-000-076308-98485-4
71000974747010329557
DP8825NS8825NS(Green)
Low odorFast rate of strength build
10:1 80,000 25 minutes 50 minutes 20 (36) 1,000 (7) 3,000 (21) 800 (6) 45mL490mL1 gal. pail A 5 gal. pail B 5 gal. pail A 55 gal. drum B
00-051115-81288-000-051115-81289-700-051115-81415-000-051115-81290-3 00-051115-81414-300-051115-81291-0
710006729771000681207100102180710006729171001015067100084533
3M™ Scotch-Weld™ Low Odor Acrylics
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
16
KEY
PRO
DUC
T
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-20°F
(-29°C
)
75°F(2
4°C)
150°F
(66°C
)
Approxim
ate
Viscosit
y at
75°F (2
4°C) (c
P)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
3M™ Scotch-Weld™ Low Surface Energy (LSE) Acrylics
DP8005 (Black)
Bonds polyole-fins and low surface energy materials
10:1 25,000 3 minutes 3 hours N/A 875 (6) 2,000 (14) 475 (3) 45mL 490mL
00-051128-99352-100-051128-99298-2
71000894757100089476
DP8005 (Off-White)
Bonds polyole-fins and low surface energy materials
10:1 25,000 3 minutes 3 hours N/A 750 (5) 2,200 (15) 500 (3) 45mL 490mL
00-051128-99349-100-051128-99297-5
71000888467100090196
DP80108010(Blue)
Bonds polyole-fins and low surface energy materials
10:1 20,000 10 minutes 1 hour N/A 2,700 (19) 2,700 (19) 500 (3) 45mL490mL1 gal. pail A5 gal. pail B5 gal. pail A55 gal. drum B
00-051115-71600-300-051115-71601-000-021200-49113-900-051115-71669-000-021200-49115-300-076308-14203-2
710003671771000367197100050479710003672070000464007100153259
DP8010NS8010NS (Blue)
Bonds polyole-fins and low surface energy materialsNon-sag
10:1 65,000 10 minutes 1 hour N/A 2,700 (19) 2,700 (19) 500 (3) 45mL490mL1 gal. pail A5 gal. pail B5 gal. pail A55 gal. drum B
00-051115-81451-800-051115-81453-200-021200-49113-9 00-051115-81454-900-021200-49115-3 00-051115-81461-7
710003672171000367237100050479701032956270000464007100113670
Semi-Rigid Urethanes
*
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-40°F
(-40°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at 75°F
(24°C
) (cP)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
3M™ Scotch-Weld™ Semi-Rigid Urethanes
DP600 600 (Gray)
Concrete repair Self-leveling
1:1 6,000 1 minute 4 minutes 20 (36) 3,200 (22) 2,300 (16) 700 (5) 48.5mL 400mL8.4 fl. oz. 5 gal. pail A 5 gal. pail B
00-638060-08962-000-051111-98303-400-021200-96596-800-021200-96575-3 00-021200-96574-6
71001487407000021287700004637570101305437010170293
DP600NS 600NS (Gray)
Concrete repair Non-sag
1:1 Paste 1 minute 4 minutes 8 (14) 2,700 (19) 2,300 (16) 700 (5) 48.5mL 400mL
00-638060-08964-400-051111-98312-6
71001487477000046376
DP605NS 605NS (Off-White)
Semi-rigid Non-sag
1:1 150,000 5 minutes 20 minutes 40 (71) 4,000 (28) 2,000 (14) 600 (4) 48.5mL 00-638060-08997-2 7100148767
DP6310NS (Green)
Multi-purposeEnergy absorbing
1:1 Non-sagpaste
10 minutes 45 minutes 20 (36) 3,500 (24) 3,600 (25) 900 (6) 48.5mL 400mL 5 gal. pail A 5 gal. pail B50 gal. drum A 50 gal. drum B
00-076308-86407-1 00-076308-86398-2 00-076308-86782-900-076308-86748-5 00-076308-86783-6 00-076308-86749-2
710010982971001098307100143960710014391570104153167010412199
DP6330NS (Green)
Multi-purposeEnergy absorbing
1:1 Non-sagpaste
30 minutes 2 hours 20 (36) 3,600 (25) 3,600 (25) 1,000 (7) 48.5mL 400mL 5 gal. pail A 5 gal. pail B50 gal. drum A 50 gal. drum B
00-076308-86431-6 00-076308-86433-0 00-076308-86780-5 00-076308-86701-0 00-076308-86781-2 00-076308-86727-0
710010982871001098277100143961710014370170104096117010366145
3532 B/A (Brown)
Multi-purpose Semi-rigid bonds
1:1 30,000 10 minutes 90 minutes 25 (44) 2,500 (17) 2,000 (14) 300 (2) 2 oz. kit Quart kit 5 gal. pail A 5 gal. pail B
00-021200-20878-2 00-021200-20879-9 00-021200-20935-2 00-021200-20881-2
7000000863700004648170101305447010170296
3535 B/A (Off-White)
Multi-purpose Semi-rigid bonds
1:1 30,000 3 minutes 30 minutes 25 (44) 2,500 (17) 2,000 (14) 300 (2) 2 oz. kitQuart kit5 gal. pail A 5 gal. pail B
00-021200-20887-4 00-021200-20888-100-051111-07486-2 00-051111-07485-5
7000046483701031019970103661607010330223
17
3M’s Low Surface Energy Structural Acrylic Adhesives bond to low surface energy plastics such as Polypropylene (PP), Polyethylene (HDPE) and most Thermoplastic Polyolefins (TPOs), providing structural adhesive bond strength that causes the plastic material to fail before the adhesive bond. DP8010 Blue
3M’s Concrete Repair Urethane Adhesives repair cracks and patch holes in minutes, providing minimal disruption to your operations. Products are available for both horizontal and vertical surfaces. DP600
3M™ Scotch-Weld™ Low Surface Energy (LSE) Plastic Bonding Adhesives
3M™ Scotch-Weld™ Concrete Repair Adhesives
Mix Ratio
(Volume) B
:A
Key Feature
s
Product (
Color)
Size UPCFloatin
g Roller P
eel
PLI (N/cm) at
75°F (24°C)
-40°F
(-40°C
)
75°F(2
4°C)
180°F
(82°C
)
Approxim
ate
Viscosit
y at
75°F (2
4°C) (c
P)
Approxim
ate
Mixed W
ork Life
at 75°F
(24°C
)
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
Stock #
Overlap Shear: psi (MPa)
3M™ Scotch-Weld™ Flexible Urethanes
DP604NS 604NS (Black)
Flexible Non-sag
1:1 Paste 4 minutes 20 minutes 30 (53) 1,400 (10) 600 (4) 300 (2) 48.5mL400mL 5 gal. pail A 5 gal. pail B 55 gal. drum A55 gal. drum B
00-638060-08961-3 00-051111-98301-000-021200-96462-6 00-021200-96461-900-076308-14205-6 00-076308-87087-4
710014873871000694527010365926701036726570103295387010412243
DP620NS 620NS (Black)
Semi-flexible Non-sag
1:1 Paste 20 minutes 4 hours 40 (71) 3,000 (21) 2,500 (17) 500 (3) 48.5mL 400mL 5 gal. pail A 5 gal. pail B 55 gal. drum A55 gal. drum B
00-638060-08960-600-048011-57287-100-076308-14144-800-076308-14135-600-076308-14135-5 00-076308-14146-3
710014873770000463727010329537701036726270103010347010309744
DP640 (Brown)
Tough flexible bonds
1:1 25,000 60 minutes 8 hours 60 (107) 3,000 (21) 2,000 (14) 400 (3) 48.5mL 400mL
00-638060-08991-0 00-021200-89544-9
71001487617010330225
3549 (Brown)
Tough flexible bonds
1:1 25,000 60 minutes 8 hours 60 (107) 3,000 (21) 2,000 (14) 400 (3) 2 oz. kit Quart kit 5 gal. pail A 5 gal. pail B
00-021200-20901-7 00-021200-20902-4 00-021200-20942-0 00-021200-20904-8
7000046484700004648571000417387100041737
DP5001 5001 (Black)
Flexible Conveyor belt repair
1:1 100,000 1 minute 15 minutes N/A N/A 600 (4) N/A 400mL 00-051111-98296-9 7100028818
*
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
18
*
PUR Adhesives enhance productivity with fast green strength. Shorter clamp times and reduced need for third-hand mechanical fasteners help speed up your production process without sacrificing ultimate strength.
3M™ Scotch-Weld™ PUR Adhesives
1500
1000
500
0psi 5 min 10 min 15 min 30 min 1 h 2 hr
PUR PVA 2-Part Epoxy Hot Melt
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
3M™ Scotch-Weld™ PUR Easy 250 Preheater
For lead times on bulk adhesives, please contact your 3M representative.
Key Feature
s
Product (
Color)
Size UPCAppro
ximate O
pen
Time at 7
5°F (2
4°C)
Viscosit
y @
250°F (1
21°C) (c
P)
Stock #
Shore D
Elongation %
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
(24°C
)
EZ250015 (Off-White)
Fast set time UV tracer
7,000 1.5 minutes 15 seconds 65 750 1/10 gal.5 gal.
00-051115-23545-000-051115-23546-7
70000465297010310232
EZ250060(Off-White)
Medium set time UV tracer
7,000 2 minutes 60 seconds 60 675 1/10 gal.5 gal.
00-051115-23550-400-051115-23551-1
70000465317010329734
EZ250120(Off-White)
Medium set timeLow viscosity UV tracer
3,000 4 minutes 120 seconds 60 625 1/10 gal. 00-051115-23554-2 7000046532
TE015(Off-White)
Fast set time UV tracer
7,000 1.5 minutes 15 seconds 65 750 1/10 gal.5 gal.
00-051115-25156-600-021200-39211-5
70000464727010367438
TE030(Off-White)
Fast set timeHigh viscosityNo UV tracer
16,000 1 minute 30 seconds 60 725 1/10 gal.5 gal.55 gal. drum
00-051115-25157-300-021200-82484-500-021200-82483-8
700004653670103102367010367598
TE100(Off-White)
Medium set timeUV tracer
7,000 2 minutes 60 seconds 61 675 1/10 gal.5 gal.
00-051115-25161-0 00-021200-87244-0
70000285907010295326
TE200(Off-White)
Medium set timeLow viscosity UV tracer
3,000 4 minutes 120 seconds 60 625 1/10 gal.2 kilo
00-051115-25164-100-048011-53272-1
70000009057000046540
*
3M™ Scotch-Weld™ PUR Adhesives – Wood Bonders
19
Ove
rlap
She
ar S
tren
gth
Typi
cal S
tren
gth
Build
on
Woo
d
3M™ Scotch-Weld™ PUR Easy 250 Applicator
20
Key Feature
s
Product (
Color)
Size UPCAppro
ximate O
pen
Time at 7
5°F/24°C
Viscosit
y @
250°F (1
21°C) (c
P)
Stock #
Shore D
Elongation %
Approxim
ate Tim
e
to H
andling Stre
ngth
at 75°F
/24°C
Applicator PUR Easy 250 Applicator, pneumatically dispenses 1/10 gal. cartridges, US 120V 00-051115-23563-4 7000000958
Preheater PUR Easy 250 Preheater, preheats up to four 1/10 gal. cartridges, 120V, Dual Temp 00-051115-23564-1 7000121608
System Accessoriesfor hands-free dispensing
Applicator Bench Mount Bracket Assembly (bracket only)Hot Melt Applicator Foot Pedal Assembly 9277
00-021200-30086-800-021200-82278-0
70001216147000121596
Cartridge Nozzle High Temperature Nozzles for PUR 1/10 gal. cartridges (Sample, 5/bag) 50-638060-40564-7 7100218849
Repair Kits and Replacement Parts
Adhesive Applicator Housing/Shroud Assembly Kit Applicator Nozzle Shroud Benchmount Quick Exhaust Assembly Replacement Kit Applicator Air Coupler Filter Kit Applicator Air Supply Line Kit Applicator Air Valve Kit Applicator Swivel Connector Applicator End Cap Applicator Heat Tube Assembly (120V) KitApplicator Heat Tube (240V)Applicator On/Off Switch KitApplicator Power Cord Kit (120V)Applicator Wire StandHigh Temperature (250 Degrees F) PUR Preheater Thermostat/TCO KitLow Temperature (170 Degrees F) PUR Preheater Thermostat/TCO Kit
00-051115-25783-4 00-048011-58320-400-021200-31357-8 00-021200-89475-6 00-021200-89479-4 00-048011-57410-3 00-048011-58298-6 00-021200-89476-3 00-021200-89486-2 00-021200-25303-4 00-021200-89482-4 00-021200-89481-7 00-021200-89483-1 00-051115-23619-8 00-051115-23618-1
700002862370001482887010366711700004666570000466687000046652700004665370000466667010329969700004667371000795097010366708701032997070103299547010366686
EZ250030(Off-White)
Fast set time, bonds a wide variety of plastics, no UV tracer
13,000 2 minutes 30 seconds 50 725 1/10 gal.5 gal.
00-051115-23541-2 00-051115-23542-9
70000465307000121357
EZ250150(Off-White)
Long open time, bonds plastics to metal, glass, wood, no UV tracer
9,000 4 minutes 150 seconds 45 700 1/10 gal.2 kilo5 gal.
00-051115-23559-7 00-051115-23562-7 00-051115-23560-3
700004653370102953257010367590
EZ250200(Off-White)
Long open time, low viscosity, bonds plastics, wood, and many other material combinations, no UV tracer
2,750 3 minutes 120 seconds 30 400 1/10 gal. 2 kilo
00-048011-57402-8 00-048011-57401-1
70000465387010367604
TE031(Black)
Fast set time, bonds a wide variety of plastics, no UV tracer
13,000 2 minutes 30 seconds 50 725 1/10 gal.5 gal.
00-051115-25159-7 00-021200-89573-9
70000009037100031123
TE031(Off-White)
Fast set time, bonds a wide variety of plastics, no UV tracer
13,000 2 minutes 30 seconds 50 725 1/10 gal.2 kilo5 gal.
00-051115-25158-0 00-048011-53355-1 00-021200-83695-4
700000090270000285897100096731
TE040(Black)
Fast set time, strong flexible bonds to plastic, wood, aluminum, glass, no UV tracer
7,000 2 minutes 40 seconds 35 860 1/10 gal.2 kilo5 gal.55 gal. drum
00-051115-64536-5 00-051115-64430-600-638060-14494-700-638060-14321-6
7100003450700013666971001726857100160468
TE040(Off-White)
Fast set time, strong flexible bonds to plastic, wood, aluminum, glass, no UV tracer
7,000 2 minutes 41 seconds 35 860 1/10 gal.5 gal.55 gal. drum
00-051115-25160-3 00-021200-25343-000-638060-14498-5
700002129270001366287100170133
TS115 HGS/UV (Off-White)
UV indicatorExtrudable/sprayable/roll coat-able with fast set time, bonds plastics to metal, glass, wood
16,000 10 minutes 60 seconds 47 600 5 gal. 00-051115-64535-8 7010310234
TS115 HGS (Off-White)
Extrudable/sprayable/roll coatable with fast set time, bonds plastics to metal, glass, wood, no UV tracer
16,000 10 minutes 60 seconds 47 600 1/10 gal.5 gal. 55 gal. drum
00-051115-25163-4 00-021200-89451-000-021200-89452-7
700000090470102993777010367606
TS230(Black)
Extrudable/sprayable, long open time, bonds plastics to metal, glass, and wood, no UV tracer
9,000 4 minutes 150 seconds 45 700 1/10 gal.2 kilo5 gal.55 gal. drum
00-051115-25166-500-048011-53273-800-021200-89583-800-638060-14675-0
7000000906700004654170001213617100179521
TS230(Off-White)
Extrudable/sprayable long open time, bonds plastics to metal, glass, and wood, no UV tracer
9,000 4 minutes 150 seconds 45 700 1/10 gal.2 kilo5 gal.55 gal. drum
00-051115-25165-800-048011-53271-400-021200-83640-400-021200-83639-8
7000000898700004653471000249597100104259
TS230(Gray)
Extrudable/sprayable long open time, bonds plastics to metal, glass, and wood, no UV tracer
9,000 4 minutes 150 seconds 45 700 55 gal. drum 00-638060-40191-0 7100191940
Purge Material 3756
Purge PUR adhesives from bulk dispensing equipment
8250 N/A N/A N/A N/A 5 gal. 00-021200-56522-9 7000121333
Descrip
tion
Product
UPCSto
ck #
3M™ Scotch-Weld™ PUR Applicator/Preheater/Hardware
*KE
Y PRO
DUCT
3M™ Scotch-Weld™ PUR Adhesives – Plastic Bonders
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
3M’s Low Odor and MMA Acrylic Adhesives are designed for all of your sign application needs. They provide excellent impact strength, high peel strength and greatly extended shelf life compared to ordinary structural adhesives. With high structural strength, fast cure and environmental resistance, they are the first choice for the sign industry. DP8805NS, DP8810NS, DP8825NS, DP8405NS, DP8407NS, DP8410NS and DP8425NS
3M™ Scotch-Weld™ Low Odor and MMA Acrylic Adhesives
PR Gel (Clear)
Fast cure, gel viscosity for max gap filling
Gel -65° to 180°F (-54° to 82°C)
20-60 sec. 24 20 gram tube 300 gram cart
00-051115-25265-5 00-051115-25282-2
71000392557100039257
PR40 (Clear)
Low viscosity for close fitting plastic/rubber parts
40 -65° to 180°F (-54° to 82°C)
3-20 sec. 24 20 gram bottle 00-051115-25204-4 7010330469
PR100 (Clear)
General purpose, low viscosity plastic bonder
100 -65° to 180°F (-54° to 82°C)
10-20 sec. 24 20 gram bottle500 gram bottle500 gram bottle,25/CV2 kilo bottle
00-051115-25214-3 00-051115-25213-6 00-051115-25939-5
00-051111-07176-2
710003925971000392007010330473
7100135507
PR600 (Clear)
Medium viscosity with some gap filling for plastic/rubbers
600 -65° to 180°F (-54° to 82°C)
4-40 sec. 24 50 gram bottle500 gram bottle
00-051115-25241-900-051115-25240-2
71000392447100039246
PR1500 (Clear)
General purpose, high viscosity for gap filling
1,500 -65° to 180°F (-54° to 82°C)
20-60 sec. 24 20 gram bottle500 gram bottle500 gram bottle,25/CV
00-051115-25222-800-051115-25221-100-076308-14147-9
710003920171000392037010366528
Surface Insensitive
SI Gel (Clear)
Fast cure, gel viscosity for max gap filling
Gel -65° to 180°F (-54° to 82°C)
20-60 sec. 24 20 gram tube 300 gram cart.
00-051115-25266-2 00-051115-25284-6
71000392587010330472
SI100 (Clear)
Low viscosity for medium gaps 100 -65° to 180°F (-54° to 82°C)
3-20 sec. 24 3 gram tube 20 gram bottle
00-051115-25290-7 00-051115-25268-6
71000392417100039240
SI1500 (Clear)
High viscosity for gap filling 1,500 -65° to 180°F (-54° to 82°C)
5-60 sec. 24 50 gram bottle 500 gram bottle
00-048011-61662-9 00-051115-25245-7
70103304777100039243
LowOdor
LO1000 (Clear)
General purpose, high viscosity with reduced odor and blooming, suitable for minor gap filling
1,000 -65° to 180°F(-54° to 82°C)
20-25 sec 24 20 gram bottle500 gram bottle
00-051111-91664-300-048011-62738-0
71000392697100039250
3M™ Scotch-Weld™ Instant Adhesives – Low Odor
3M™ Scotch-Weld™ Instant Adhesives – Surface Insensitive
Key Feature
s
Product (
Color)
Size UPCTemperatu
re Range
Typical
Viscosit
y (cP)
Stock #
3M™ Scotch-Weld™ Instant Adhesives – Plastic and Rubber
Time to
Handlin
g
Full Cure (H
ours)
KEY
PRO
DUCT
21
Alternate Nozzle System not for use with disposable nozzles
Applicator Main Nozzle Assembly (includes nozzle, tip, tip cap and valve) Applicator Main Nozzle Applicator Extension Tip, .072 in orificeApplicator Tip, .125 in orificeApplicator Tip, .063 in orificeApplicator Tip CapApplicator Valve Assembly
00-021200-89514-200-021200-89515-900-021200-89471-800-021200-89473-200-021200-89472-500-021200-87194-800-021200-83730-2
7000027561700004667270000466697000046671700004667071000058197000046650
Descrip
tion
Product
UPCSto
ck #
3M™ Scotch-Weld™ PUR Applicator/Preheater/Hardware (cont.)
Key Feature
s
Product (
Color)
Size UPCTemperatu
re Range
Typical
Viscosit
y (cP)
Stock #
3M™ Scotch-Weld™ Instant Adhesives – Super Fast
Time to
Handlin
g
Full Cure (H
ours)
SF20 (Clear)
Fast cure Optimum performance on wide range of rubbers and plastics
20 -65° to 180°F (-54° to 82°C)
4-30 sec. 24 20 gram bottle 500 gram bottle
00-051111-91667-4 00-051115-25790-2
71000497447100039254
SF100 (Clear)
Fast cure, high strength with EPDM and other elastomers
100 -65° to 180°F (-54° to 82°C)
4-30 sec. 24 3 gram tube 20 gram bottle 500 gram bottle
00-048011-62630-7 00-048011-62631-400-048011-62629-1
710003920771000392067100039208
Rubber Toughened
RT5000B (Black)
Rubber toughened for impact resistance High viscosity for minor gap filling
5,000 -65° to 180°F (-54° to 82°C)
30 sec 24 20 gram bottle 500 gram bottle
00-051111-91665-000-051115-25200-6
71000392517100039252
Engineered Grade
CA4 Fast setting for a variety of plastics and rubbers
150 -65° to 180°F (-54° to 82°C)
5-40 sec. 24 2 gram tube 1 oz. bottle 1 lb. bottle
00-021200-96601-9 00-021200-96600-2 00-021200-96597-5
701036632070000285867000028587
CA5 Higher viscosity, slower setting version of CA4 for filling gaps Meets CID A-A-3097, Type II,Class 3
2,000 -65° to 180°F (-54° to 82°C)
12-60 sec. 24 1 oz. bottle 1 lb. bottle
00-021200-74289-7 00-021200-74288-0
70000465247010367474
CA7 Very fast setting Excellent metal bonder Better shock and impact resistance
15-40 -65° to 212°F (-54° to 100°C)
1-30 sec. 24 1 oz. bottle 1 lb. bottle
00-021200-21061-7 00-021200-21062-4
70001213527000121353
CA8 Rapid setting Excellent adhesion to metals, plastics and rubbersMeets CID A-A-3097, Type II, Class 2
70-130 -65° to 180°F (-54° to 82°C)
5-40 sec. 24 2 gram tube 1 oz. bottle 1 lb. bottle
00-021200-21065-5 00-021200-21066-2 00-021200-21067-9
700012135470000465267000046527
CA9 Slower setting for parts alignment Useful for wire tracking and coil terminatingMeets CID A-A3097, Type II, Class 3
1,000-1,700
-65° to 180°F (-54° to 82°C)
20-70 sec. 24 1 oz. bottle 1 lb. bottle
00-021200-21068-6 00-021200-21069-3
70000465287010299373
CA40 Very fast setting Excellent adhesion to many substrates including flexible vinyl and EPDM rubber
20 -65° to 180°F (-54° to 82°C)
3-20 sec. 24 1 oz. bottle 1 lb. bottle
00-021200-74290-3 00-021200-74291-0
70000008937000000894
CA40H Higher viscosity version of CA40Better void filling capabilities
400-600 -65° to 212°F (-54° to 100°C)
5-40 sec. 24 1 oz. bottle 1 lb. bottle
00-021200-21073-0 00-021200-21074-7
70000008957000000896
CA50 Gel High-viscosity, non-sag gel Less sensitive to acidic surfaces
45,000-85,000
-65° to 212°F (-54° to 100°C)
60-120 sec. 24 20 gram tube 200 gram cart.
00-021200-82332-9 00-021200-83737-1
71000025177000000899
CA100 High peel and impact strength High thermal shock and heat resistance
2,500-4,500
-65° to 212°F (-54° to 100°C)
20-70 sec. 24 1 oz. bottle 1 lb. bottle
00-021200-82334-3 00-021200-82335-0
70000009007000000901
3M™ Scotch-Weld™ Instant Adhesives – Rubber Toughened
3M™ Scotch-Weld™ Instant Adhesives – Engineered Grade
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
22
Key Feature
s
Product (
Color)
Size UPCTypical
Viscosit
y (cP)
Stock #
3M™ Scotch-Weld™ Instant Adhesive Primers & Activators
Time to
Handlin
g
Full Cure (H
ours)
AC09 Instant adhesive activator Non-flammable, solvent-based California compliant
1 1-5 sec. 24 2 fl. oz. bottle 00-051111-07795-5 7010366543
AC77 Instant adhesive primer for bonding of difficult-to-bond plastics such as polyethylene, polypropylene and polyacetal
<3 1-5 sec. 24 2 fl. oz. bottle 1 gallon can
00-048011-62728-1 00-638060-40067-8
71000392607100190206
AC79 Instant adhesive primer for bonding of difficult-to-bond elastomers such as silicone, fluoroelastomer and EPDMVOC compliant
2 1-5 sec. 24 2 fl. oz. bottle 8 fl. oz. bottle4 liter can
00-051115-31388-2 00-051115-31389-9 00-051115-31390-5
710003926271000392647100039265
AC113 Instant adhesive general purpose accelerator Will not attack plastics
<3 1-5 sec. 24 8 fl. oz bottle 00-048011-62682-6 7100079891
AC452 Instant adhesive acetone-based accelerator flashes off rapidlyExcellent adhesion Overspray may attack some plastics
<2 1-5 sec. 24 8 fl. oz bottle4 liter can
00-048011-62686-4 00-048011-62689-5
70102953497010366542
Surface Activator
Clear, colorless organic-based liquid helps speed curing and prime surfacesComes with brush and spray pump
<10 1-5 sec. 24 2 fl. oz. bottle 00-021200-87937-1 7000046525
3M’s Engineered Grade Instant Adhesives combine high performance, excellent adhesion and temperature resistance with the speed of instant adhesives – providing you with differentiated capabilities for your most difficult thin bond line applications. CA5, CA40, CA40H, CA50 Gel
3M™ Scotch-Weld™ Engineered Grade Instant Adhesives
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
The PR (Plastic & Rubber) series of products bonds to most plastics and rubbers with a range of viscosities that will fit all your application needs. Just a single drop per square inch bonds several thousand pounds of holding power. They provide proven, world record strength with a hold of 8 metric tons. PR40, PR100, PR600, PR1500 and PRGel
3M™ Scotch-Weld™
Plastic and Rubber Instant Adhesives
23
SURFACE PREPARATION
Which do you require?
Is the substrate an elastormer? EG silicone, EPDM, Santoprene?
Sensitive plastics
Non-flam, California compliant
AC79
AC452
AC77
AC09
AC113
PRIMER
ACTIVATOR
NO
YES
Acetone- based, rapid flash
THREADLOCKERSWhat strength do you require?
MEDIUM
Does it need to be oil tolerant? Are the parts pre-assembled?
Is the bolt size > 1"?
HIGHLOW
NO
TL71*TL22 TL62TL42 TL77TL43 TL90
YES
YESYESNO
Key Feature
s
Product (
Color)
Size UPCTemperatu
re Range
Typical
Viscosit
y (cP)
Stock #
3M™ Scotch-Weld™ Anaerobic Adhesives – Threadlockers
Time to
Handlin
g
Full Cure (H
ours)
TL22 (Purple)
Screwlock - low removal torque fasteners less than a 1/4” (6mm)
1,200 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 10mL bottle 50mL bottle 250mL bottle
00-048011-62601-7 00-048011-62602-4 00-048011-62603-1
710003921771000391597010367446
TL42 (Blue)
Nutlock - medium strength, general purpose
1,200 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 1mL pipette 10mL bottle 50mL bottle 250mL bottle 1 liter bottle
00-048011-62604-8 00-048011-62605-5 00-048011-62606-2 00-048011-62607-9 00-051115-25124-5
71000640437100039190710003919371000391927010310189
TL43 (Blue)
Oil tolerant, medium strength, general purpose
3,300 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 10mL bottle 50mL bottle 250mL bottle
00-051115-25138-2 00-051115-25139-9 00-051115-25140-5
710003921971000392227100039221
TL62 (Red)
Studlock - high strength with controlled torque tension
1,600 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 10mL bottle 50mL bottle 250mL bottle
00-048011-62609-3 00-048011-62610-9 00-048011-62611-6
710003919471000391967100039195
TL71 (Red)
Permanent studlock for bolts and studs up to 1” (25mm)
500 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 1mL pipette 10mL bottle 50mL bottle 250mL bottle
00-051115-25125-2 00-048011-62612-3 00-048011-62613-0 00-048011-62614-7
7010330204710003919771000392317100039230
TL77 (Red)
Heavy duty permanent for fasteners up to 1.5” (38mm)with coarse threads
7,000 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 50mL bottle 250mL bottle
00-051115-25143-6 00-051115-25144-3
71000392257100039224
TL90 (Green)
Penetrating adhesive for pre-assembled fasteners and porosity sealing of welds
20 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 10mL bottle 50mL bottle 250mL bottle
00-048011-62615-4 00-048011-62616-1 00-048011-62617-8
710003923471000392367100039235
Pipe Seal-ant
HP45 (Purple)
High pressure sealant for allhydraulic and pneumatic fittings
14,000 -65° to 300°F (-54° to 149°C)
< 30 minutes 24 50mL bottle 250mL bottle
00-048011-62721-2 00-048011-62722-9
71000392137100039212
PS65 (White)
General purpose for applications requiring easy disassembly
Paste -65° to 300°F (-54° to 149°C)
2-5 hours 24 50mL tube 250mL tube
00-048011-62711-3 00-048011-62712-0
71000392387100039237
PS67 (White)
Fast curing pipe sealant for inactive surfaces such as stainless steel
Paste -65° to 400°F (-54° to 204°C)
15-30 mins 24 50mL tube 250mL tube
00-048011-62714-4 00-048011-62715-1
71000392167100039215
PS77(Yellow)
Fast curing pipe sealant with medium-high viscosity
18,000 -65° to 400°F (-54° to 204°C)
15-30 mins 24 50mL tube 00-054007-99635-4 7010366168
3M™ Scotch-Weld™ Anaerobic Adhesives – Pipe Sealants
24
PIPE SEALANTSDo you require the parts be disassembled?
Does your coarse thread require HT?
Do you need high gap filling?
PS67HP45 PS65 PS77
YES
YES
NO
NO NO YES
*For permanent attachment.
RETAINING COMPOUNDS
RT48RT09RT38
<0.015" <0.005"<0.005"
What gap fill is required?
GASKET MAKERSDo you need
flexible or rigid?
GM10GM18GM74
RIGIDFLEXIBLE
Key Feature
s
Product (
Color)
Size UPCTemperatu
re Range
Typical
Viscosit
y (cP)
Stock #
3M™ Scotch-Weld™ Anaerobic Adhesives – Retaining Compounds
Time to
Handlin
g
Full Cure (H
ours)
RT09 (Green)
For tight tolerances and press fit augmentation
125 -65° to 300°F (-54° to 149°C)
10-30 mins 24 10mL bottle 50mL bottle 250mL bottle
00-048011-62661-1 00-048011-62662-8 00-048011-62663-5
710003922871000392097010367430
RT38 (Green)
Fast setting, high strength for bearings, bushings or sleeves on shafts or in housings
2,500 -65° to 300°F (-54° to 149°C)
10-15 mins 24 250mL bottle 00-051115-81284-2 7010367436
RT48 Medium viscosity, high strength, fast curing formulation
600 -65° to 300°F (-54° to 149°C)
15-20 mins 24 50mL bottle 250mL bottle
00-054007-99632-300-054007-99633-0
70103674437100170130
GM10 (Red)
Masking or dressing gaskets in rigid assemblies Can be screen printed High temperature resistance
Paste -65° to 400°F (-54° to 204°C)
< 30 minutes 24 50mL tube 00-048011-62652-9 7100039210
GM18 (Red)
Instant flexible seal without a primer on mating aluminum flanges
Paste -65° to 300°F (-54° to 149°C)
< 30 minutes 24 300 gram cart. 50mL tube
00-048011-62660-4 00-048011-62658-1
70103674337100039211
GM74(Orange)
Form-in-place gasketing product designed for multi-purpose applications on rigid metal flanges and surfaces
Paste -65° to 300°F (-54° to 149°C)
< 30 minutes 24 50mL bottle,10/CV
00-054007-99634-7 7010330193
AC649(Green)
Acetone-based green primer for inactive or very cold surfaces30-day part life for pre-application California compliant
<3 N/A <5 minutes 24 2 fl. oz. bottle 8 fl. oz. bottle
00-048011-62708-3 00-048011-62709-0
71000752757010367620
3M™ Scotch-Weld™ Anaerobic Adhesives – Gasket Makers
3M™ Scotch-Weld™ Anaerobic Adhesives – Activators
KEY PRODUCT Denotes product to consider first in this category * After Key Products, consider these.Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
For lead times on bulk adhesives, please contact your 3M representative.
25
Do you need high gap filling?
NO YES
3M™ Scotch-Weld™ EPX™ Plus II Applicator*Stock #: 7100148764
UPC: 00-063806-01001-7
1:1/2:1 Shared PlungerStock #: 7010415317
UPC: 00-063806-01000-0
✓ ✓ 3.6
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Green, 48.5mL/50mL Stock #: 7100104991 UPC: 0-00-76308-86434-7
Bulk: 7100148765 Bulk: 0-00-63806-01003-1
✓ ✓ 6.23M™ EPX™ Mixing Nozzle Helical White, 48.5mL/50mL Stock #: 7100148766 UPC: 00-063806-01004-8
Bulk: 7100148756Bulk: 00-063806-01005-5
2:1 Plunger Used only for 2216 epoxyStock #:7010309947
UPC:0-00-76308-86390-6
✓
3.3
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Gold, 43mL Stock #: 7000000952 UPC: 0-00-21200-50008-4
Bulk: 7000121587Bulk: 0-00-21200-50009-1
5.8
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Helical White, 43mL Stock #: 7100034271 UPC: 0-00-51115-81449-0
Bulk: 7100034272 Bulk: 0-00-51115-81467-9
10:1 Plunger Stock #: 7010329933 UPC: 0-00-76308-86391-3
✓ 3.6
3M™ Scotch-Weld™ EPX™ Mixing NozzleSquare Orange, 45mL Stock #: 7100007806 UPC: 0-00-51115-69043-3
3M™ EPX™ Metal ApplicatorStock #: 7000000954
UPC: 0-00-21200-21789-0
Plunger Stock #: 7000000956
UPC: 0-00-21200-82314-5
✓
3.3
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Gold, 43mL Stock #: 7000000952 UPC: 0-00-21200-50008-4
Bulk: 7000121587Bulk: 0-00-21200-50009-1
5.8
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Helical White, 43mL Stock #: 7100034271 UPC: 0-00-51115-81449-5
Bulk: 7100034272Bulk: 0-00-51115-81467-9
✓ 3.6
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Green, 43mL/48.5mL Stock #: 7100104991 UPC: 0-00-76308-86434-7
Bulk: 7100148765 Bulk: 0-00-63806-01003-1
✓ 6.23M™ EPX™ Mixing Nozzle Helical White, 48.5mL/50mL Stock #: 7100148766 UPC: 00-063806-01004-8
Bulk: 7100148756Bulk: 00-063806-01005-5
3M™ EPX™ Pneumatic Applicator 48.5/50 mLStock #: 7100148769
UPC: 00-063806-01006-2
N/A
✓ ✓ 3.6
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Green, 43mL/48.5mL Stock #: 7100104991 UPC: 0-00-76308-86434-7
Bulk: 7100148765 Bulk: 0-00-63806-01003-1
✓ ✓ 6.23M™ EPX™ Mixing Nozzle Helical White, 48.5mL/50mL Stock #: 7100148766 UPC: 00-063806-01004-8
Bulk: 7100148756Bulk: 00-063806-01005-5
3M™ Scotch-Weld™ EPX™ Manual Applicator 200 mLStock #: 7000046632
UPC: 0-00-21200-87977-7
1:1/2:1 Shared Plunger Stock #: 7000121583
UPC: 0-00-21200-87981-4
✓ ✓
5.0
3M™ Scotch-Weld™ EPX™ Mixing NozzleSquare Gold, 200mL and 400mL Stock #: 7000028616 UPC: 0-00-21200-97331-4
7.5
3M™ Scotch-Weld™ EPX™ Mixing NozzleHelical White, 200mL and 400mL Stock #: 7000046633 UPC: 0-00-21200-87982-1
*Includes 1:1 / 2:1 shared plunger and 10:1 plunger.
Replacement
Plunger Ord
ers
Static M
ixing
Nozzle O
ptions
45 mL (1
0:1)
50 mL (2
:1)
200 mL (2
:1 & 1:
1)
400 mL (2
:1 & 1:
1)
Nozzle Length (In
ches)
43 mL (2
:3)
3M™ EPX™ Applicators and Nozzles
48.5 mL (1
:1)
26
3M™ EPX™ 200, 400 mL Manual Applicator Stock #:7000046634
UPC:0-00-51111-98073-6
N/A ✓ ✓5.0
3M™ Scotch-Weld™ EPX™ Mixing NozzleSquare Gold, 200mL and 400mL Stock #: 7000028616 UPC: 0-00-21200-97331-4
7.5
3M™ Scotch-Weld™ EPX™ Mixing NozzleHelical White, 200mL and 400mL Stock #: 7000046633 UPC: 0-00-21200-87982-1
3M™ EPX™
490 mL Manual ApplicatorStock #:7100015958
UPC:0-00-51115-71115-2
N/A
9.5
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Helical Orange, 490mL Stock #: 7100015959 UPC: 0-00-51115-69042-6
4.4
3M™ Scotch-Weld™ EPX™ Mixing Nozzle, Low Waste Square Green, 490mL Stock #: 7100066351 UPC: 0-00-51115-81619-2
3M™ Scotch-Weld™ EPX™ Pneumatic Applicator 200 mLStock #:7000121584
UPC:0-00-21200-87978-4
N/A ✓
5.0
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Gold, 200mL and 400mL Stock #: 7000028616 UPC: 0-00-21200-97331-4
7.5
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Helical White, 200mL and 400mL Stock #: 7000046633 UPC: 0-00-21200-87982-1
3M™ EPX™ 400 mL Pneumatic ApplicatorStock #:7000148285
UPC:0-00-21200-87979-1
N/A ✓5.0
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Square Gold, 200mL and 400mL Stock #: 7000028616 UPC: 0-00-21200-97331-4
7.5
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Helical White, 200mL and 400mL Stock #: 7000046633 UPC: 0-00-21200-87982-1
3M™ EPX™ 490 mL Pneumatic ApplicatorStock #:7100011053
UPC:0-00-51115-69041-9
N/A
9.5
3M™ Scotch-Weld™ EPX™ Mixing Nozzle Helical Orange, 490 mL Stock #: 7100015959 UPC: 0-00-51115-69042-6
4.4
3M™ Scotch-Weld™ EPX™ Mixing Nozzle, Low Waste Square Green, 490 mL Stock #: 7100066351 UPC: 0-00-51115-81619-2
Standard Caulk Gun N/A
3M™ Concrete Repair Urethane8.4 oz cartridges
5.5
3M™ Concrete Repair 8.4 oz Cartridge Nozzles Stock #: 7000046642 UPC: 0-00-48011-53382-7
For low volume applications and take-it-to-the-job convenience, the 3M™ EPX™ Plus II and EPX™ metal manual applicators comfortably dispense any of the 3M™ Scotch-Weld™ Duo-Pak Structural Adhesives. For higher volume applications, select the 200mL manual dispenser, or the 200mL or 400mL pneumatic dispenser. For concrete repair, there are both manual or pneumatic options.
3M™ Scotch-Weld™ One-Part Heat Cured Epoxies require a unique manual or pneumatic dispenser, such as Semco® 250, 350, 850, 950, or equivalent.
Replacement
Plunger Ord
ers
Static M
ixing
Nozzle O
ptions
45 mL (1
0:1)
50 mL (1
:1)
200 mL (2
:1 & 1:
1)
400 mL (2
:1 & 1:
1)
Nozzle Length (In
ches)
37 mL (2
:1) & 43 m
L (2:3)
3M™ EPX™ Applicators and Nozzles
27
Industrial Adhesives& Tapes Division3M CenterBuilding 225-3S-06St. Paul, MN 55144-10001-800-362-3550www.3M.com/structuraladhesives
3M, Scotch-Weld, EPX and Scotch Brite are trademarks of 3M Company. SEMCO® is a registered trademark of SEMCO, LLC.Please recycle. Printed in USA.© 2020 3M. All rights reserved.78-9236-7114-9 Sept 2020
Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.
Surface Preparation TipsThe following surface preparation steps are generally recommended for most substrates and structural adhesives. See Technical Data Sheets for more specific recommendations.
METALS
1. Safely wipe surface with acetone or methyl ethyl ketone (MEK) using a clean cloth. A heavier degreaser may be needed if the substrate contains a layer of processing oil.
2. Lightly abrade surface with sandblasting, fine grit sandpaper or 3M™ Scotch-Brite™ 7447 maroon pads.
3. Wipe surface with acetone or MEK to remove debris.
4. Allow surface to dry before applying adhesive.
PLASTICS AND RUBBERS
1. Lightly abrade surface with sandblasting, fine grit sandpaper or 3M™ Scotch-Brite™ 7447 maroon pads.
2. Wipe surface with isopropyl (IPA) alcohol using a clean cloth to remove debris.
3. Allow solvent to evaporate before applying adhesive.
GLASS
1. Wipe surface using a clean cloth with solvent containing 0.5 wt% silane adhesion promoter or wipe with 3M™ Scotch-Weld™ Metal Primer 3901.
2. Allow solvent to evaporate before applying adhesive.
Click these links to see how 3M™ Scotch-Weld™ Structural Adhesives show unbelievable feats of strength and how our customers solved their challenges. We Help You Make It. Better.
Scotch-Weld™
PUR Easy 250 Adhesive Applicator
Technical Bulletin September, 2014
Product Description 3M™ Scotch-WeldTM
PUR Easy 250 Applicator is a self contained pneumatic applicator
designed to dispense 1/10th gallon(300Ml) cartridges of 3M™ PUR adhesives.
PURs are a family of one-component, moisture curing, urethane adhesives. These
adhesives are applied warm and can bond a wide variety of substrates such as wood, fiber
reinforced plastic (FRP) and many other plastics to themselves, to metal and to glass. See
technical data sheets for additional information on 3M™ Scotch-Weld PUR adhesives.
Features Accepts 1/10th
gallon (300Ml) aluminum
cartridges
Plastic disposable tip (supplied with 3M™
Scotch-Weld PUR adhesives)
Pneumatic dispensing (rated for 80 psi) (US)120 VAC 50/60Hz, 1.7A, 200W
UL rated 12 Month warranty
3M™ Scotch-
WeldTM
PUR Easy
250 Applicator
3M ID Number Part No.
62-9865-9930-6 51115-23563
3M™ Scotch-
WeldTM
PUR Easy
250 Applicator
requirements
Electrical 120 VAC 50/60Hz
1.7 A, 200W
Applicator is equipped with a cord having an equipment-grounding conductor and grounding plug. Make sure applicator is connected to an outlet having the same configuration as the plug. Do not use an adapter.
Air
Max 80 psi, 0.4 CFM
Connect to a filtered, regulated and dry air supply (see applicator User’s manual for more information)
Tool Weight
3.1 pounds* (1.45Kg)
Weight of applicator with electrical and airline, without cartridge.
3M™ Scotch-Weld™
PUR Easy 250 Adhesive Applicator Technical Bulletin
-2-
Repair/Replacement
Parts
3M™ Scotch-WeldTM
PUR Easy 250 Applicator
Item # Part Description 3M ID Number Part No. Comments
1 Air supply line 62-9895-0005-3 21200-89479
2 Air Valve Trigger 62-9845-0009-0 48011-57410
See installation guide provided with Air Valve Trigger for installation information.
3 Coupler Filter 62-9895-0001-2 21200-89475
4 End Cap 62-9895-0003-8 21200-89476
5 End Cap Seal 62-9895-0004-6 21200-89477
Seal is located inside of end cap. See installation guide provided with seal for installation information.
6 Wire Stand 62-9895-0033-5 21200-89483
7 Nozzle Housing/shroud kit
62-9865-9950-4 51115-25783
Stk # also includes Item #11 nozzle shroud. (Replaces stk# 62-9845-0030-6)
8 On/off Switch 62-9895-0024-4 21200-89482
See installation guide provided with on/off switch for installation information
9 Power Cord 62-9895-0021-0 21200-89481
10 Swivel Connector 62-9845-9934-0 48011-58298
(Quick Dump valve old stk# 62-9895-0020-2) See installation guide provided with swivel connector for installation information.
3M™ Scotch-Weld™
PUR Easy 250 Adhesive Applicator Technical Bulletin
-3-
Repair/Replacement
Parts Continued Item # Part Description 3M ID Number Part No. Comments
11 Nozzle Shroud 62-9845-0029-8 48011-58320 3 shrouds per bag, 1 bag per case
Not shown
Disposable plastic tip
78-8132-7930-0 Can only be order by 3M
Sales Representative
Nozzle Shroud
adjustment with
Disposable Nozzle
Attached a disposable nozzle onto a 3M™ Scotch-Weld™ PUR Easy 250 or PUR
Adhesive cartridge and load into the 3MTM
Easy 250 applicator. With the cartridge
loaded the tip of the disposable nozzle should extend past the shroud by
approximately 1/16”. If the tip of the disposable nozzle is not adjusted correctly loose
set screw located on the side of the nozzle housing (see diagram below). Then adjust
the shroud either in or out until the tip of the disposable nozzle is protruding
approximately 1/16” beyond the shroud as shown. Tighten set screw to secure
shroud.
3M™ Scotch-WeldTM
PUR Accessories Part Description
3M ID Number
Part No. Comments
3M™ Scotch-WeldTM
PUR Easy 250 Cartridge Preheater
62-9865-9930-6 51115-23564 Used to preheat up to 4-1/10
gallon
cartridges at a time.
3M™ Hot Melt Applicator Foot Pedal Assembly 9277
62-9277-9930-4 21200-82278
Can be used with Benchmount bracket assembly for hands free operation of 3M™ Scotch-Weld
TMEasy 250 applicator
3MTM
Scotch-WeldTM
Polyurethane Reactive Adhesive Benchmount Bracket Assembly
62-9895-9950-1 21200-30086
Comes with Bracket only does not include stand shown in picture. Allows for hands free operation when used with foot pedal assembly
Main Nozzle 62-9895-0018-6 21200-89515 Not for use with disposable plastic nozzle. Does not include valve, tip or tip cap.
Main Nozzle Assembly 62-9895-0019-4 21200-89514 Not for use with disposable plastic nozzle. Includes valve, tip(0.090”) and tip cap.
3M™ Scotch-Weld™
PUR Easy 250 Adhesive Applicator Technical Bulletin
-4-
3M™ Scotch-WeldTM
PUR Accessories
Continued Part Description
3M ID Number
Part No. Comments
Valve 62-9773-0012-8 21200-83730
Use with main nozzle assembly 62-9895-0018-6 or 62-9895-0019-4.
See installation guide provided with valve for installation information.
Low Flow tip -0.062” orifice
62-9895-0016-0 21200-89472 3 tips per bag, 1 bag per case. Use with main nozzle assembly 62-9895-0018-6 or 62-9895-0019-4.
Extension tip - 0.072” orifice
62-9895-0015-2 21200-89471 3 tips per bag, 1 bag per case. Use with main nozzle assembly 62-9895-0018-6 or 62-9895-0019-4.
Tip - 0.090” orifice 62-9773-0013-6 21200-87191 3 tips per bag, 1 bag per case. Use with main nozzle assembly 62-9895-0018-6 or 62-9895-0019-4.
High Flow tip – 0.125” orifice
62-9895-0017-8 21200-89473 3 tips per bag, 1 bag per case. Use with main nozzle assembly 62-9895-0018-6 or 62-9895-0019-4.
Tip Cap 62-9773-0014-4 21200-87194 3 caps per bag, 1 bag per case. Use with main nozzle assembly 62-9895-0018-6 or 62-9895-0019-4.
3M™ Scotch-
WeldTM
PUR
Adhesives for use
in 3M™ Scotch-
WeldTM
Easy 250
applicator
PURs - Easy 250 (yellow labels) PURs (Purple labels)
EZ250015 TE015
EZ250030 TE030
EZ250060 TE031/TE031 Black
EZ250120 TE040/TE040 Black
EZ250150 TE100/TE100 Black
EZ250200 TE200
TS115HGS
TS230White/TS230 Black
Available Package
Sizes 3M™
Scotch-WeldTM
PUR adhesives
1/10 gallon cartridge1,2
2 Kilo bag3
5 gallon pail 55 gallon drum
10 fluid ounces/295ml 2 Kgs(4.4 pounds) 36 pounds (16.3 Kgs) 400 pounds (181.4 Kgs)
Thread size for nozzle M15 X 1.5
Slug OD. – 5.0” (127 mm)
Pail ID. – 11.25” (285.8mm) Pail Ht. – 13.5” (343 mm)
Drum ID. – 23.6” (600.5 mm) Drum Ht. – 34.8” (883.9 mm)
1- Packed 5 -1/10 gallon cartridges per case. 2-10 disposable plastic nozzles are supplied with each case of adhesive. 3-Packed 6 -2kg bags per case.
Approximate
Coverage per
container (Linear ft per container
based on 1/8” dia. Bead size)
1/10 gallon cartridge
2 Kilo bag
5 gallon pail 55 gallon drum
250’ (76.2m)
1650’ (502.9m)
13,500’ (4114.8m)
170,200’ (51876.9m)
3M™ Scotch-Weld™
PUR Easy 250 Adhesive Applicator Technical Bulletin
-5-
Adhesive Warm - up 1/10 gallon Cartridges: Should be heated for a minimum of 45 minutes in either the 3MTM
Pre-heater (US - Pn.23564) or Easy 250 PUR Adhesive Applicator (US - Pn. 23563). The PUR
can be held at dispensing temperature for up to 16 hours* (total time in pre-heater and
applicator). Refer to t h e 3M™ Polyurethane Reactive (PUR) Easy 250 Adhesive
Applicator User’s Manual for complete information on applicator requirements, cartridge
loading, and adhesive application. *Note: It is recommended that adhesive heated longer than this total time be discarded and fresh adhesive introduced.
Adhesive
Application
After heating adhesive to 250°F (121°C)1, apply an adequate amount of 3M™ Scotch-Weld™ PUR
Adhesive to one of the substrates to be bonded. Adhesive should only be applied to clean, dry
surfaces. (See surface preparation below for additional information)
For the best results apply the PUR only on substrates that are at ambient/room temperature prior to
adhesive application.
Join the substrates within the recommended open time and hold/fixture the bonded part until the adhesive has adequately set.
Do not move or adjust surfaces after contact has been made, as inferior bond strength will result. 1-Dispensing temperature should never exceed 275°F (135°C)
Precautionary Information
Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.
Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
ISO 9001
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/adhesives
3M and Scotch-Weld are trademarks of 3M Company.
©3M 2014
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 1 of 10
Safety Data Sheet
Copyright,2018,3M Company.All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group: 21-5686-7 Version Number: 5.00Issue Date: 05/21/18 Supercedes Date: 01/22/18
SECTION 1: Identification
1.1. Product identifier3M™ Scotch-Weld™ PUR Adhesive EZ250060
Product Identification Numbers62-3852-5230-9, 62-3852-5235-8, 62-3852-5236-6, 62-3852-6839-6, 62-3852-8530-9
1.2. Recommended use and restrictions on use
Recommended useStructural adhesive
1.3. Supplier’s detailsMANUFACTURER: 3MDIVISION: Industrial Adhesives and Tapes DivisionADDRESS: 3M Center, St. Paul, MN 55144-1000, USATelephone: 1-888-3M HELPS (1-888-364-3577)
1.4. Emergency telephone number1-800-364-3577 or (651) 737-6501 (24 hours)
SECTION 2: Hazard identification
2.1. Hazard classificationRespiratory Sensitizer: Category 1.Skin Sensitizer: Category 1.Specific Target Organ Toxicity (repeated exposure): Category 1.
2.2. Label elementsSignal wordDanger
SymbolsHealth Hazard |
Pictograms
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 2 of 10
Hazard StatementsMay cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction.
Causes damage to organs through prolonged or repeated exposure: respiratory system |
Precautionary Statements
Prevention:Do not breathe dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. Wear protective gloves. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response:IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Get medical advice/attention if you feel unwell.
Disposal:Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
SECTION 3: Composition/information on ingredients
Ingredient C.A.S. No. % by WtPOLYURETHANE RESIN 31075-20-4 > 97 Trade Secret *P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) 101-68-8 < 3 Trade Secret *
*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:Immediately flush skin with large amounts of cold water for at least 15 minutes. DO NOT ATTEMPT TO REMOVE MOLTEN MATERIAL. Cover affected area with a clean dressing. Get immediate medical attention.
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 3 of 10
Eye Contact:Immediately flush eyes with large amounts of water for at least 15 minutes. DO NOT ATTEMPT TO REMOVE MOLTEN MATERIAL. Get immediate medical attention.
If Swallowed:Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayedSee Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment requiredNot applicable
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing mediaIn case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
5.2. Special hazards arising from the substance or mixtureNone inherent in this product.
Hazardous Decomposition or By-Products Substance ConditionAmine Compounds During CombustionIsocyanates During CombustionCarbon monoxide During CombustionCarbon dioxide During CombustionHydrogen Cyanide During Combustion
5.3. Special protective actions for fire-fightersNo special protective actions for fire-fighters are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency proceduresEvacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautionsAvoid release to the environment.
6.3. Methods and material for containment and cleaning upPour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2% detergent) on spill and allow to react for 10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with absorbent material. Collect as much of the spilled material as possible. Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48 hours to avoid pressure build-up. Clean up residue. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations.
SECTION 7: Handling and storage
7.1. Precautions for safe handlingAvoid skin contact with hot material. Avoid breathing of dust created by cutting, sanding, grinding or machining. For
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 4 of 10
industrial or professional use only. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
7.2. Conditions for safe storage including any incompatibilitiesKeep container tightly closed to prevent contamination with water or air. If contamination is suspected, do not reseal container. Store away from heat. Store away from amines.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limitsIf a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component.Ingredient C.A.S. No. Agency Limit type Additional CommentsP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI)
101-68-8 ACGIH TWA:0.005 ppm
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI)
101-68-8 OSHA CEIL:0.2 mg/m3(0.02 ppm)
ACGIH : American Conference of Governmental Industrial HygienistsAIHA : American Industrial Hygiene AssociationCMRG : Chemical Manufacturer's Recommended GuidelinesOSHA : United States Department of Labor - Occupational Safety and Health AdministrationTWA: Time-Weighted-AverageSTEL: Short Term Exposure LimitCEIL: Ceiling
8.2. Exposure controls
8.2.1. Engineering controlsUse general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended:Safety Glasses with side shields
Skin/hand protectionSelect and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing.Gloves made from the following material(s) are recommended: Butyl RubberNeopreneNitrile Rubber
Respiratory protection
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 5 of 10
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure:Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
Thermal hazards Wear heat insulating gloves when handling hot material to prevent thermal burns.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical propertiesGeneral Physical Form: Solid Specific Physical Form: Waxy SolidOdor, Color, Grade: white/off-white, mild odor.Odor threshold No Data AvailablepH Not ApplicableMelting point No Data AvailableBoiling Point 302 ºF [@ 5 mmHg] [Details:MDI]Flash Point >=300 ºFEvaporation rate No Data AvailableFlammability (solid, gas) Not ClassifiedFlammable Limits(LEL) No Data AvailableFlammable Limits(UEL) No Data AvailableVapor Pressure No Data AvailableVapor Density 8.6 [Ref Std:AIR=1] [Details:MDI]Density 1.14 g/lSpecific Gravity 1.14 [Ref Std:WATER=1]Solubility in Water NilSolubility- non-water No Data AvailablePartition coefficient: n-octanol/ water No Data AvailableAutoignition temperature No Data AvailableDecomposition temperature No Data AvailableViscosity Approximately 5,000 centipoise [Details:CONDITIONS: @
250F (Brookfield)]Hazardous Air Pollutants 2 - 3 % weight [Test Method:Calculated]Molecular weight No Data AvailableVOC Less H2O & Exempt Solvents 0 g/l [Test Method:calculated SCAQMD rule 443.1]VOC Less H2O & Exempt Solvents 0 % [Test Method:calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. ReactivityThis material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stabilityStable.
10.3. Possibility of hazardous reactionsHazardous polymerization will not occur.
10.4. Conditions to avoidHeat
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 6 of 10
Sparks and/or flames
10.5. Incompatible materialsAminesAlcoholsReaction with water, alcohols, and amines is not hazardous if container can vent to the atmosphere to prevent pressure buildup.
10.6. Hazardous decomposition productsSubstance Condition None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest.
May cause additional health effects (see below).
Skin Contact:During heating:
Thermal Burns: Signs/symptoms may include intense pain, redness and swelling, and tissue destruction.
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Eye Contact:During heating:
Thermal Burns: Signs/symptoms may include severe pain, redness and swelling, and tissue destruction.
Contact with the eyes during product use is not expected to result in significant irritation.
Ingestion:May be harmful if swallowed. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 7 of 10
Additional Health Effects:
Prolonged or repeated exposure may cause target organ effects:Respiratory Effects: Signs/symptoms may include cough, shortness of breath, chest tightness, wheezing, increased heart rate, bluish colored skin (cyanosis), sputum production, changes in lung function tests, and/or respiratory failure.
Additional Information:Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates.
Toxicological DataIf a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.
Acute ToxicityName Route Species ValueOverall product Inhalation-
Vapor(4 hr)No data available; calculated ATE >50 mg/l
Overall product Ingestion No data available; calculated ATE2,000 - 5,000 mg/kgPOLYURETHANE RESIN Dermal LD50 estimated to be > 5,000 mg/kgPOLYURETHANE RESIN Ingestion LD50 estimated to be 2,000 - 5,000 mg/kgP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) Dermal Rabbit LD50 > 5,000 mg/kgP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) Inhalation-
Dust/Mist (4 hours)
Rat LC50 0.368 mg/l
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) Ingestion Rat LD50 31,600 mg/kgATE = acute toxicity estimate
Skin Corrosion/IrritationName Species Value
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) official classification
Irritant
Serious Eye Damage/IrritationName Species Value
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) official classification
Severe irritant
Skin SensitizationName Species ValueP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) official
classification
Sensitizing
Respiratory SensitizationName Species Value
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) Human Sensitizing
Germ Cell MutagenicityName Route Value
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) In Vitro Some positive data exist, but the data are not sufficient for classification
Carcinogenicity
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 8 of 10
Name Route Species ValueP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) Inhalation Rat Some positive data exist, but the data are not
sufficient for classification
Reproductive Toxicity
Reproductive and/or Developmental EffectsName Route Value Species Test Result Exposure
DurationP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI)
Inhalation Not classified for development Rat NOAEL 0.004 mg/l
during organogenesis
Target Organ(s)
Specific Target Organ Toxicity - single exposureName Route Target Organ(s) Value Species Test Result Exposure
DurationP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI)
Inhalation respiratory irritation May cause respiratory irritation official classification
NOAEL Not available
Specific Target Organ Toxicity - repeated exposureName Route Target Organ(s) Value Species Test Result Exposure
DurationP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI)
Inhalation respiratory system Causes damage to organs through prolonged or repeated exposure
Rat LOAEL 0.004 mg/l
13 weeks
Aspiration HazardFor the component/components, either no data are currently available or the data are not sufficient for classification.
Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components.
SECTION 12: Ecological information
Ecotoxicological information
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components.Chemical fate information
Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components.
SECTION 13: Disposal considerations
13.1. Disposal methodsDispose of contents/ container in accordance with the local/regional/national/international regulations.
As a disposal alternative, utilize an acceptable permitted waste disposal facility. Incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities.
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 9 of 10
EPA Hazardous Waste Number (RCRA): Not regulated
SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.
SECTION 15: Regulatory information
15.1. US Federal RegulationsContact 3M for more information.
EPCRA 311/312 Hazard Classifications:Physical HazardsNot applicable
Health Hazards
Specific target organ toxicity (single or repeated exposure)
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient C.A.S. No % by WtP,P'-DIPHENYLMETHANEDIISOCYANATE (MDI)
101-68-8 Trade Secret < 3
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) (Benzene, 1,1'-methylenebis[4-isocyanato-)
101-68-8 < 3
P,P'-DIPHENYLMETHANEDIISOCYANATE (MDI) (DIISOCYANATES (CERTAIN CHEMICALS ONLY))
101-68-8 < 3
15.2. State Regulations Contact 3M for more information.
15.3. Chemical InventoriesThe components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory.
Contact 3M for more information.
15.4. International Regulations Contact 3M for more information.
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: Other information
NFPA Hazard ClassificationHealth: 2 Flammability: 1 Instability: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
3M™ Scotch-Weld™ PUR Adhesive EZ250060 05/21/18
__________________________________________________________________________________________
Page 10 of 10
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
Document Group: 21-5686-7 Version Number: 5.00Issue Date: 05/21/18 Supercedes Date: 01/22/18
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE.User is responsible for determining whether the3Mproduct is fit for a particular purpose and suitable for user's method of use or application.Given the variety of factors that can affect the use and application of a3Mproduct, some of which are uniquely within the user's knowledge and control,it is essential that the user evaluate the3Mproduct to determine whether it is fit for a particular purpose and suitable for user's method of use or application.
3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from3M
3M USA SDSs are available at www.3M.com