BasicTutorial_Case1
-
Upload
leo-libran -
Category
Documents
-
view
217 -
download
0
Transcript of BasicTutorial_Case1
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 1/53
midas Dshop (Basic Tutorial)
- 1 -
Basic Tutorial
Reinforced Concrete Structure
midDrawinS
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 2/53
- 2 -
Index
Ch.1 Summary of Design1. Summary of Building Model2. Standards of Structural Design3. Structural Materials4. Ground Conditions5. Plans and Cross Sections6. Section Properties
Ch.2 Create Plans
Menu Structure of midas DrawingShop’s Auto-drawing Module
1. New Project1. Export Design Results from midas Gen2. Execute midas DrawingShop3. Start New Projects4. Load Design Results5. Check Model Information6. Specify Project Information
2. Create Models7. Define Reinforcement Guideline8. Create Gridlines9. Auto-Generate Plans and Sections10. Auto-Placement of Reinforcement11. Edit Reinforcement Information12. Auto-Grouping of Members13. Manual Grouping14. Design Similar Floors15. Create General Notes16. Change Member Eccentricities
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 3/53
- 3 -
3. Structural Drawing17. Settings
18. Setting Plan Style19. Setting Section Style20. Setting Member List Style21. Setting General Notes Style22. Output Option23. Generate Auto Drawing
Ch.3 Edit Drawing
1. Specify Basic Information of Drawing2. Create Drawing3. Line up Drawing4. Draw Stairs and Edit
Ch.4 Confirm Drawing
1. General Notes2. Framing Plan3. Sectional Drawing4. Sectional Member List5. Printing6. Serial Printing
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 4/53
Reinforcement Concrete Structure
- 4 -
Application 1. Reinforced Concrete
Structure
This example of Reinforced Concrete is composed for users to acquire ageneral understanding of creating structural drawings by using the designresults of midas Gen.
Before using midas DrawingShop in an actual project, it is highly recommended
that you exercise the examples with a complete understanding of『Principle of
Drawing』available in the User’s Guide.
In this example, the process of generating structural drawings of a ReinforcedConcrete structure using midas DrawingShop is explained below.
1. Import design results of midas Gen
2. Auto-generate drawings in midas DrawingShop
3. Edit drawings
4. Print drawings
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 5/53
Summary of Design
- 5 -
Chapter 1 Summary of Design
Summary of Building Model
Section Item Remarks
Building Office building of midas India Pvt., Ltd.
LocationMaitili’s signet, Plot No. 39/4, Sector 30AVashi, Navi Mumbai, India
Use Office
Scale Six stories above ground
StructuralSystem
Dual system (Moment resisting frame withreinforced concrete structural walls) in transversedirection. Moment resisting frame in longitudinaldirection.
Standards of Structural Design
1. IS456: 2000
Materials of Structure
Material Floor Type Standard Intense(N/mm2) Remarks
Concrete All floorsNormalconcrete
M25 25
Reinforcement All floors Fe415 IS 415Fe250 IS 250
Ground Conditions
1. Basic foundation: Spread footing
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 6/53
Summary of Design
- 6 -
Plans and Cross Sections
5.1 Plan of the 2nd
floor
6 50 0 7 00 0 7 00 0
2 0 5 0 0
X 1 2X 3X 4X
1
Y
Y 2
Y 3
4 5 0 0
4 5 0 0
9 0 0 0
C 1 G 1 C 1 G 1 C 1 G 1 C 1
C 1
G 1
B 1
G 1
B 1
G 1
B 1
G 1
B 1
G 1
B 1
G 1
B 1
G 1
G 1C 1G 1C 1G 1C 1
C 1 G 1 C 1 G 1 C 1 G 1
W X 1
W X 1
C 1
G 1
W X 1
W X 1
2nd
floor Plan
5.2 Column and wall layout (Cross Section of Columns on each floor)
1
Y
2
Y
3
Y
6500
X 1 X 2 X 3 X 4
9 0 0 0
4 5 0 0
70007000
20500
4 5 0 0
1 5 0 0
1 5 0 0
1 5 0 0
1 5 0 0
4 5
0
4 5 0
4 5 0
30 03 0 0 3 0 0
4 5 0 4 5 0 4 5 0 4 5 0
W X 1
G 1
C 1 C 1 C 1
C 1
C 1 C 1 C 1 C 1
C 1 C 1 C 1 C 1
G 1 G 1 G 1
G 1G 1G 1
G 1 G 1 G 1
G 1
G 1
G 1
G 1
G 1
G 1
G 1
B 1
B 1
B 1
B 1
B 1
B 1
W X 1
W X 1
W X 1
Column and wall layout (Cross Section of columns on each floor)
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 7/53
Summary of Design
- 7 -
5.3 Cross Section
Y1 Y2 Y3
4,500 4,500
9,000
1F
2F
3F
4F
5F
6F
Roof
4 ,
2 0 0
3 ,
2 0 0
3 ,
2 0 0
3 ,
2 0 0
3 ,
2 0 0
3 ,
2 0 0
2 0 ,
2 0 0
G1G1
C1C1C1
Section Property
(Table 1) Column, Beam
StoreyColumn Beam Remarks
Group Size(mm) Group Size(mm)
Roof - - G1 450x650
6F C1 400x400 G1 450x650
4~5F C1 700x700 G1 450x650
2~3F C1 700x700 G1 450x700
1F C1 750x750 G1 700x1800
(Table 2) Wall, Footing
Storey Thickness(mm) Remarks
Wall All 180
Spread Footing 1F 700
Cross section at X2 grid
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 8/53
Create Models
- 8 -
Chapter 2 Create Models
Menu Structure of midas DrawingShop’s Auto-drawing Module
1. 『File』Menu
2. 『Model』Menu
3. 『Struct. DWG』Menu
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 9/53
Create Models
- 9 -
1. New Project
Export Design Results of midas Gen
After you complete the analysis and design in midas Gen, save the analysis/design resultsin a neutral file ( [fn.mgn] in this case).
1. Open “BasicTut(RC)_Italy.mgb” file. The file is saved in “Samples\Basic Tutorial”
folder of the program installed folder (ex. c:\Program Files\Midas\DrawingShop).
2. Click icon to perform an analysis.
3. Perform beam design from 『Design』>『Concrete Code Design』>『Beam
Design』 and check the design results and close it.
4. Perform column design from 『Design』>『Concrete Code Design』>『Column
Design』 and check the design results and close it.
5. Perform wall design from 『Design』>『Concrete Code Design』>『Wall
Design』 and check the design results and close it.
6. Execute 『File』>『Export』>『midas Drawing File』in midas Gen.
7. Click 『Save As』button. Input the file path and file name『fn.mgn』and click
.
Figure1 Export design results of midas Gen
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 10/53
Create Models
- 10 -
Execute midas DrawingShop
Execute the midas DrawingShop program.
Execute『Program』>『DrawingShop』.
Figure2 Execute the program
You can execute midas DrawingShop by double clicking the icon on your
desktop or from the 『Start』menu.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 11/53
Create Models
- 11 -
Start New Project
Initialize the program for executing a new project.
Execute 『File』>『New Project』.
Initial page is as shown below.
Figure3 Initial page of program
Tip- Composition of the screen
The “Menu Panel ” and “Floor/Section view Panel ” on the leftside of the screen disappear if you click the Auto Hide button, andthe main view then covers a wider area of the screen.
The “Main View” has the same environment as AutoCAD.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 12/53
Create Models
- 12 -
Import Design Results of midas GenThis function imports design results from midas Gen.
Import design results classified by section IDs such as diameter, spacing and number ofreinforcement bars from midas Gen.
1. Click『File』>『Import』>『midas Gen』.
2. Click button and select the path of『fn.mgn』file exported from midas Gen.
3. Check all members in to use the same diameter, spacing and number ofreinforcement bars designed in midas Gen.
4. Select 『By Sections』in to import the most conservative design result
among the members which have the same section IDs in midas Gen.
5. Define proportioning method of legs for Column Ties.
1) midas Gen: Arrangement according to the number of legs designed in midasGen.
2) Spacing Rule: Ignore the number of legs designed in Gen; replace the tiesaccording to arrangement rules considering constructability.
3) Select Max.: Arrange using maximum number of legs calculated from (1) and(2).
6. If you check “Auto-adjustment of rebars to defined spacing”, it is possible to
rearrange the spacing according to the spacing of reinforcement defined in
『Tools』>『Preferences』>『Spacing』.
7. Virtual members modeled in midas Gen for idealizing real behavior of structure inmidas Gen should be checked. In other words, delete unnecessary sections for
drawing.
6. Click .
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 13/53
Create Models
- 13 -
By MembersImport design results of midas Gen by members. It is possible to rearrange theplacement of reinforcement considering constructability by using the requiredrebar area for each member calculated in Gen.
By SectionsAssign the most conservative results to all members which have the samesection IDs. If you give section numbers considering member grouping in
midas Gen, then check on 『By sections』. In this case, the name of group is
determined from the section name you defined in midas Gen. You can alsorearrange the placement of reinforcement considering constructability.
Figure 4 Import design results of midas Gen Figure 5 Define spacing of rebars
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 14/53
Create Models
- 14 -
Check Model Information
Once importing is complete, 『Model View』tab is added as shown below and the three
dimensional model appears in the rendering window. You should check the input
information from midas Gen.
1. Click 『View』>『3D Dynamic View』 and confirm the shape by rotating the
structure.
Figure 6. Model View
Mouse Wheel function is the same as in AutoCAD.1. Pan
If you click the mouse wheel button, the mouse cursor turns into the shape of a
palm ( ). If you drag the mouse, then the focus moves.
2. Zoom In and OutIf you rotate the mouse wheel, you can set Zoom In/Out. And if you rotate it with
Shift Key at the same time, the focus of screen moves up and down.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 15/53
Create Models
- 15 -
Specify Project Information
Load Project Information from midas Gen.This information will be used to manage the project and will be printed in the drawing ifnecessary.
1. Execute 『File』>『Project Information』.
2. Input the information of plans in the table. (Input results are as shownbelow.) Input project name, user name, company name, address andtelephone number. “Project Name” will be marked in the drawing.
3. After inputting all information click .
Figure 7. Specify Project Information
Copy & Paste FunctionAll tables in midas DrawingShop work similar to MS Excel tables. You canCopy//Paste information directly if required.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 16/53
Create Models
- 16 -
2. Create Models
Define Reinforcement Guidelines
Define the standard values in 『Concrete Reinforcement Guideline』, 『Wall StructureReinforcement Guideline Wall』, 『Steel Structure Junction Part Draw Guideline』,
『Steel Skeleton Reinforcement Concrete Arrangement Guideline』 for reinforcement
arrangement or for creating plans. (Refer to 『Rules of Making Drawings』)
A warning message will appear if any of the guidelines are not followed when you edit anyinformation of arrangement.
1. Click 『Model』>『Define Design Code』 and define the guidelines of
arrangement by member/structure. (Default values are set according to theguidelines of arrangement above.)
2. Confirm the guidelines for Beam/Column/Bracing/Wall/Foundation and modifyif necessary. (When you edit the information for the reinforcementarrangement and if the defined value is not satisfied, a warning messageappears.)
3. Click .
Figure 8. Guidelines for ConcreteColumn and Bracing Figure 9 Guidelines for Concrete
Beam
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 17/53
Create Models
- 17 -
Figure 10. Guidelines for ReinforcedConcrete Walls and Footings
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 18/53
Create Models
- 18 -
Create Gridlines
Auto-generate gridlines by using the design information from midas Gen, and edit theDimension and Gridline names.
1. Click 『Model』>『Grid Lines』 for drawing and naming gridlines.
(Gridlines will be auto-generated for girders and walls based on nodes inputin midas Gen.)
2. Click to automatically generate the gridlines.
3. Change Symbol from “Both” to “Start” for the grid line “X1, X2, X3, X4,Y1, Y2, and Y3”. Grid line name can be changed by clicking the namecolumn.
4. Click .
Figure 11 Auto-generate and Edit Gridlines
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 19/53
Create Models
- 19 -
Auto-Generate Plans and Sections
Now, auto-generate plans and sections according to defined design code.
1. Double-click the specific floor in the “Plan View” panel.
Double-click “1F”, “2F”, … “Roof”. (In this step, 『Plan View』 tab is auto-added to
top of screen and the plan is auto-generated in the main screen.)
2. Double-click “Grid number” in “Sectional View” panel.Double-click X2 and Y2.
3. Check the model on the screen using the wheel button of mouse (zoom in/out, pan).
Figure 12. Auto-Generate Plans and Sections
Tip: Change Tab of Plan View/Sectional View
It is possible to check each plan and section by double-clicking it
after you select “Plan View” or “Sectional View” tabs.
✔”Sectional View”
You can easily changethe eccentricity of columnand wall by using thispanel.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 20/53
Create Models
- 20 -
Auto-Placement of Reinforcement
Re-arrange reinforcement bars for beams considering constructability according to the
guidelines defined in『Define Design Code』
Re-arrange reinforcement bars and calculate the amount of reinforcement requiredignoring the diameter, number and spacing designed in midas Gen.
Don’t execute this command if you want to use the diameter, number and spacing ofreinforcement equally.
Process of re-arrangement is shown below.
1. Click 『Model』>『Beam』>『Auto-Placement of Rebars』.
2. Click after defining the Splice Method for beams and the diameter ofreinforcement bars for each floor.
Define the Diameter of Rebars
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 21/53
Create Models
- 21 -
Edit Reinforcement Information
You can edit rebars designed by midas Gen or auto-placed by『Auto-Placement of
Rebars』.
There are two ways to edit information of bar arrangement in DrawingShop.(1) Method 1: Editing each member by double clicking.(2) Method 2 : Editing bar arrangements in a Table.
Method 1: Edit each member by double clicking on the member as shown below.
1. To edit bar arrangement for individual members, double click each member.(You can modify the bar arrangement as required. A “Warning Dialogue” will appear if
any rules of bar arrangement are not followed.)
2. Click 『Apply to Member』 when you want to apply the modified details only to
a specific member. If you want to use the same details for all members in the group
then click 『Apply to Group』.
3. Click after modifying all the information for bar arrangement.
『Modify Beam Rebars』window is as shown below.
Figure13 Editing Window of Beam Rebars
✔You don’t need to
edit the information ofbar arrangement if youuse the information ofrebars designed bymidas Gen.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 22/53
Create Models
- 22 -
Method 2: Editing bar arrangements in Table is as shown below.
1. Execute 『Model』>『Beam』>『Change Rebars on Table』.
(You can modify the bar arrangement as required. A “Warning Dialogue” will appearif any rules of bar arrangement are not followed.)
2. It is possible to select members individually by using “Select” button.
Otherwise, you can also select multiple members in the same column at one time by
selecting members while holding 『Ctrl』Key.
1) If you click a member (Beam) on plan with holding 『Ctrl』Key, then all
members on Continuous Beam are selected.2) Vertical member(Column or Wall) of all floors are selected by clicking and
holding 『Ctrl』Key on plan.
3. The procedure to apply the modified details to each member is the same as inMethod 1.
Tip Selection of ObjectsThere are two ways of object selection.
1. Select the selection type in “Select Toolbar”
Select Single
Select Window
Select Crossing
Select All
Unselect all
2. Select subjects after clicking [View]> [Select] or [Unselect].All the selection methods are the same as in midas Gen.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 23/53
Create Models
- 23 -
『Modify Rebars』window of RC members is shown below. Modify it as in
beams.
Column/Bracing 『Modify Column Rebars』
Wall 『Modify Wall Rebars』
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 24/53
Create Models
- 24 -
Auto-Grouping of Members
This option is used to group members which have the same section dimensions and rebararrangement. In addition, this option works when members design information issymmetrically same.
1. Click『Model』>『Beam』>『Auto-Grouping of Members』 to group members
automatically.
2. Click for completing automatic grouping.
Group columns, bracings and walls in the same way.
Grouping signs appear when 『Auto-Grouping of Members』 is executed.
The numbers in brackets are the member numbers defined in midas Gen.
You can modify the bar arrangement after auto-grouping of members
with『Modify Rebars』option.
It is possible to re-group members by using 『Auto-Grouping of Members』 even
after modifying bar arrangements.
✔It is possible not to
mark signs of memberwith the function
of『View』>『Display
Option』.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 25/53
Create Models
- 25 -
Manual Grouping
With this option, member group names imported from midas Gen, can be modified. It isnot necessary to use the manual grouping option if you use the same group name as inmidas Gen.
1. Click『Model』>『Beam』>『Manual Grouping』. A window as shown below
appears on the left side of the screen.
2. Select “Girder” or “Beam” from the Combo Box . Then, select the group namethat you want to modify. All the members of the selected group appear on the grid.
3. If you want to move some members of the selected group to another group, selectthe members marked with this grid name and then click the arrow button.
4. Move the selected member to another group now. If you want to change it to an
existing group, choose that group in the Combo Box . If the group does not exist,input a new group name in
5. Click for updating the modified group information.
6. Click to finish manual grouping.
Figure14. Manual Grouping (Beam)
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 26/53
Create Models
- 26 -
Define Similar Floors
Once grouping by sections is complete, start to group by floors. You can bundle severalfloors into one with this option. It is possible to define Beam/Column/Bracing/Wall by floors.
1. Click 『Model』>『Assign story group』 to auto-define one floor group which
has the same number, length and dimension of member. (It is possible to re-define the floor group which was auto-set after checking.)
2. Defined floor groups will be reflected when making member lists.
When you modify the member’s group name to existing groups,1. An error message will appear if the dimension and amount of
reinforcement of the section is different from other members in theexisting group.
2. A warning message will appear if the amount of reinforcement is lessthan that of the existing members in the group.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 27/53
Create Models
- 27 -
Create General Notes
General
Load input information from midas Gen for items that will be printed in General Notes inthe plan. Next, input additional information required to be printed in General Notes.
In addition, you can insert guides, drawings (plan, section) to General Notes in the planedit module.
1. Click『Model』>『General Notes』. General Notes window is
composed of General/Material/Splice/Footing tabs.2. Input “Design references” in the “General” tab.3. Check all used references.4. Click “Material” tab after checking the input information.
You can add or delete rows with right mouse button for adding additionalreferences.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 28/53
Create Models
- 28 -
MaterialClassify structural materials input in midas Gen by floors and print in General Notes.
1. Check structural materials of each floor. Edit them if necessary.2. Check Plot Rebar and Steel Symbol for printing them in General Notes.
3. Click “Splice/Footing” tab after checking input information.
Splice/Footing of RebarsPrint rebar splicing and ground condition details in General Notes. (Input thesebecause there are not available for import from midas Gen.)
1. Input Splice Method.2. Choose “Spread Footing” in Foundation Type and input values of Lean
Concrete and Aggregate.
3. Click .
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 29/53
Create Models
- 29 -
Change Member Eccentricities
This option allows you to adjust member eccentricities considering construction finish,installation and electrical facilities. Modify member eccentricities according to column andwall layout as shown below.
1. Click『Model』>『Change Member Eccentricities』.
2. Choose 『By Beam Members』in combo box for modifying beam
eccentricity along X1.
3. Select beam on X1 after choosing 『View』>『Select』>『Single』or
『Window』.
4. If you choose a beam, the relevant member will be marked on Grid .
5. After completing the member choice, input desired eccentricities .
6. Complete the modification of eccentricities consecutively and click .7. Close the panel by clicking after modifying all member eccentricities.8. Modify member eccentricities of Columns and Walls as above.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 30/53
Create Models
- 30 -
Change Member Eccentricities of Beam
Tip: Value of Eccentricity
The eccentricity value input in is the relative distance of the member
from its present position. The distance marked in is the absolutedistance from the node in midas Gen.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 31/53
Create Models
- 31 -
1
Y
2
Y
3 Y
6500
X 1 X 2 X 3 X 4
9 0 0 0
4 5 0 0
70007000
20500
4 5 0 0
1500
1 5 0 0
1500
1 5 0 0
4 5 0
4 5 0
4 5 0
30 0300 3 00
450 450 450 450
W X 1
G 1
C 1 C 1 C 1
C 1
C 1 C 1 C 1 C 1
C 1 C 1 C 1 C 1
G 1 G 1 G 1
G 1G 1G 1
G 1 G 1 G 1
G 1
G 1
G 1
G 1
G 1
G 1
G 1
B 1
B 1
B 1
B 1
B 1
B 1
W X 1
W X 1
W X 1
Figure15 Column and Wall Layout (Column Sections by each floor)
Change Eccentricity of Columns Change Eccentricity of Walls
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 32/53
Create Models
- 32 -
3. Structural Drawing
Setting
You can set the format and environment required to draw plans. In addition, it is possibleto save these values and use them in other projects.
Layer Setting
The Layer setting is composed of General Notes, Plan, Section and Member List settings.
1. Click 『Struct. Dwg.』>『Setting』>『Layer』.
Check the layers set in General Notes, Plan, Section and Member List tabs.
2. Click to save and close.
Figure 16. Layer Setting of General Notes Figure 17. Layer Setting of Plan
Figure 18. Layer Setting of Section Figure 19. Layer Setting of Member List
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 33/53
Create Models
- 33 -
Setting Font Style
Font Style setting menu is composed of Drawing Form, General Notes, Plan, Section andMember List. You can define and edit these font styles.
1. Click 『Struct. Dwg.』>『Setting』>『Text Style』.
Check the font styles in Drawing Form, General Notes, Plan, Section and MemberList.
2. Click to save and close.
Figure20 Setting Text Style for Drawing Form Figure21 Setting Text Style for General Notes
Figure22 Setting Text Style for Plan Figure23 Setting Text Style for Section
Figure24 Setting Text Style for Member List
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 34/53
Create Models
- 34 -
Setting Dimension Style
It is possible to define and edit Dimension Style by Plans, Sections and Member List.
1.Click『Struct. Dwg.』>『Setting』>『Dimension Style』.
Check Dimension Style for Drawing Form, General Notes, Plan, Section andMember List.
2. Click to save and close.
Figure 25. Dimension Style for Plan Figure 26. Dimension Style for Section
Figure. 27. Dimension Style for Member List
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 35/53
Create Models
- 35 -
Setting Symbol
For setting the format of Group Marks, Rebars Marks and Balloon Marks which will beprinted on the plan drawing.
1.Click 『Struct. Dwg.』>『Setting』>『Symbol』.
Symbol window is composed of Members, Rebars and Grid Line Marks tabs.Check or modify each item.
2. Click .to save and close.
Setting Member Marks
Member marks can be modified by member types.
Figure28 Setting Member Marks
midas DrawingShop auto-classifies Members considering modelinginformation, boundary conditions, directions of member and accessibilityaccording to defined Group Name.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 36/53
Create Models
- 36 -
Setting Rebars Symbol
Rebar Symbol is set as 4(●) now. If you want to modify the symbol, select
symbol and then choose symbol .
Figure 29. Modify Rebar Symbol
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 37/53
Create Models
- 37 -
Setting Load & Save
You can save the values and load them with this function. Saved values can be usedin other projects.
1.Click 『Struct. Dwg.』>『Load _ Save Setting』.
Check on the items that you want to load or save.
2. Once complete, click .
Figure30 Load & Save Settings
The values that you can load and save are shown below.
Layer/Font Style/Dimension Style/Symbol Plan Style/Section Style/Member List Style/General
Notes Style
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 38/53
Create Models
- 38 -
Setting Plan Style
Check and set the placement of marks for members and the format of the plan.
1.Click 『Struct. Dwg.』>『Plan Style』.
Confirm the format and scale of the plan. Check the location of member marks forBeam, Column, Bracing and Wall members.
2. Once complete, click .
Figure 31.Setting Plan Style for Dwg. Direction Figure 32. Setting Location of Marks ofBeam, Column, Bracing and Wall
Setting Section Style
Set the location of marks by member and the section format. You can input this yourselfaccording to guidelines. The way of use is the same as in plans.
1.Click 『Struct. DWG』>『Section Style』.
Confirm the format and scale of the plan. Check the location of marks for Beam,Column, Bracing and Wall members.
2. Once complete, click .
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 39/53
Create Models
- 39 -
Setting Member List StyleYou can set Member List Style for Beam, Column and wall.
1. Click 『Struct. Dwg.』>『Member List Style』. Confirm the dimension of the
section.
2. Once complete, click .
Figure33 Setting Member List Style for Beams Figure34 Setting Member List Style for Columns
Figure35 Setting Member List Style for Walls
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 40/53
Create Models
- 40 -
Setting General Notes Style
You can set General Notes Style.
1. Click 『Struct. Dwg.』>『General Notes Style』.
Check the dimension of the “General Note” table.
2. Once complete, click .
Output Option
Now all the input information for generating drawings is complete. You can choose to viewthe output drawings in the inbuilt °Edit Drawing Module° or output the drawings inAutoCAD DWG format.
1. Click『Struct. Dwg.』>『Output Option』.2. Select midas CAD.
3. Check on the floor and grid line that you want to print out. Selectevery floor and gridlines.
4. Once complete, click .
Figure 36. Output Option
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 41/53
Create Models
- 41 -
Generate Auto Drawing
Generate Auto Drawing according to all the inputted information and options.Define Paper Size, Drawing Scale and Line Type Scale to make Drawing Form.
1.Click 『Struct. Dwg.』>『Generate Auto Drawing』 and define the Drawing Form
as “A1.dwg”, Paper Size as “A1”, Drawing Scale as “1/100” andLine Type Scale as “5”.2. After completing Drawing Setting, move to the “Drawing Information” tab.
3. Input Drawing Number, Drawing Title, Drawing Scale, File Name andRevision History. This information will be marked on the Drawing Form.
4. Once complete, click .The “Edit Drawing Module” will be loaded and the Drawing Form will be started in
a new tab.
Figure 37. Define a Drawing Form Figure 38. Input Drawing Information
If you choose midas CADIf you choose midas CAD, additional symbols, plans by members, inserting andediting functions will be available.
In addition, you can save the file in AutoCAD DWG format after completion of editingin the DrawingShop °Edit Drawing Module°.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 42/53
Create Models
- 42 -
“Edit Drawing Module” is auto-switched if “Generate Auto Drawing”executes. Composition of Menu and Manual is same as AutoCAD.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 43/53
Edit Drawing
- 43 -
Ch.3 Edit Drawing
Specify Basic Information of Drawing(Setting a Drawing Form / Specifying Basic Information of Drawing)
1. Click 『File』>『New Drawing』for creating a new drawing.
Define Paper Size, Drawing Scale and Line Type Scale for making Drawing Form.
2.『Struct. DWG』>『Generate Auto Drawing』.
A new tab is added whenever new plans are produced. It is possible to “Rename”,“Close” and “Save” the drawing of an activated tab by right clicking on it.
Create Drawing
List of auto-generated drawings appears in the Drawing Panel. If you select the plan and
drag&drop it, you can create drawings on main screen.
1. Double click 『Generate Auto Dwg.』
2. Drag the plan of the 1st
floor at 『Drawing Panel』 and drop it on main screen.
3. Then, the window as shown below will appear. Click after checking theDrawing Name, Drawing View Point and Drawing Scale. Define the insertion pointfor the plan.
You can create General Notes, Sectional Drawing and Member Lists in the sameway.
✔It is possible to checkthe plan in “preview”
window with the zoom
out/in functions by using
a mouse wheel.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 44/53
Edit Drawing
- 44 -
Figure 39. Create Drawing
Line Up DrawingArrange the plan by using AutoCAD basic commands.
1. Arrange the plan by using the move function.This function is the same as in AutoCAD.
2. If a plan created by Drag&Drop is unnecessary, you can delete it with the “erase”function which is the same as in AutoCAD.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 45/53
Edit Drawing
- 45 -
(1) Framing Plan
(2) Sectional Drawing
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 46/53
Edit Drawing
- 46 -
(3) Member Lists
Draw Stairs and Edit
Draw stairs which were not modeled in midas Gen.
1. 『Draw』>『Stair』>『Scissor Stair』and Select Setting for Dwg.
2. Confirm the Stair, Symbol and Text Layer.
You can add a new layer in 『Format』>『Layer...』.
3. Confirm the Text Style and Height.
You can add a new text style in 『Format』>『Text Style...』.
4. 『Draw』>『Stair』>『Scissor Stair』.
Select Stair Type at . It is classified into “Top Floor” and “Typical Floor/LowestFloor”. Choose “Typical Floor”.
5. Select the Drawing Method for stair.Choose “Method 1: Define on Screen" **-in order to directly input nodes P1, P2 and
P3 in the Layout.
6. Check the dimension of Stair on Plan X-Y.
7. Click and input the node P1/P2/P3.
8. You can create stairs consecutively by checking “More Stair” option.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 47/53
Edit Drawing
- 47 -
Figure40 Setting for Drawing Stair Figure41 Draw Scissor Stair
The result of Drawing Scissor Stair is as shown below.
You can re-edit the stairs by double clicking.
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 48/53
Edit Drawing
- 48 -
1 5 0
1 5 0
1 5 0
D10@200
D10@200
D10@200
D10@200
D10@200
D10@200
D10@200
D10@200
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 49/53
Edit Drawing
- 49 -
Chapter. 4 Confirm Drawing
1. General Notes
2. Framing Plan
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 50/53
Edit Drawing
- 50 -
3. Sectional Drawing
4. Sectional Member list
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 51/53
Edit Drawing
- 51 -
5. Beam Longitudinal Member list
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 52/53
Edit Drawing
- 52 -
Printing
midas DrawingShop offers the option of printing according to Line Weight, Line Width,and defined Color. The printing method is same as in AutoCAD.
Line Weight
Line Weight or thickness of line defined in 『Format』 > 『Line Weight』.
Line WidthThickness of line set when PolyLine and Rectangle were created.
Color
The color of the selected line in 『Format』>『Color』 or selected color of Layer.
1. Execute『File』>『Print』.
2. Set [Print/Plotter Setting] device.
Click “Plot Setting” and window will appear.Define device of Print/Plotter, size of Paper and Paper Orientation.
Modification is available at .
8/3/2019 BasicTutorial_Case1
http://slidepdf.com/reader/full/basictutorialcase1 53/53
Edit Drawing
Consecutive Printing
This function makes it possible to print plans consecutively. With this function, you canset the print options on each selected plan.
1. Execute『File』 > 『Batch Plot. 』 The batch plot window will appear as shown
below.
Printing is possible by plans of “Plan Creating Module” and “Plan Modifying
Module” .
You can select several plans at a time by dragging them and holding left button ofmouse.
You can arrange the name of the plans in ascending or descending order by doubleclicking “Number” and “Name of Plan” in the header row of the table.
Select the blocks of Layer#2, Layer#3, Layer#4 by using left button of mouse. The
cell is highlighted as shown below.
2. Select the plan and click in , it is then possible to set printing options forthe selected drawing.
If you don’t select the plan as a block and click , then the print setting of only oneplan will be set.