Basic Surgical Cassette - Straumann · The upper tray of the Basic Surgical Cassette can be set up...
Transcript of Basic Surgical Cassette - Straumann · The upper tray of the Basic Surgical Cassette can be set up...
Smart Product Descriptions
Straumann® Smart
1
The Straumann® Basic Surgical Cassette has been designed to sim-plify the surgical procedure for clinicians working with one preferred Straumann implant line. No matter which implant line is used, the cassette can hold all the necessary instruments for the basic and fine implant bed preparation as well as auxiliaries (e.g. Straumann® Ratchet, SCS Screw drivers and Adapters) and planning aids.
Basic Surgical Cassette
Art.-No. Article Dimensions Material
040.564 Straumann® Basic Surgical Cassette
Length 290 mm Width 175 mm Height 62 mm
Plastic
The Straumann® Basic Surgical Cassette consists of the upper tray, the lower tray and the lid.
Simple and versatile ѹ Can be set up for any Straumann implant line ѹ Clear and simple layout for easy navigation through the surgical
procedure ѹ Streamlined instrumentation for a more efficient protocol
Smart Product Descriptions
Straumann® Smart
2
Upper tray
Adapters for Handpiece
Extra spare holders
Taps
Profile Drills**
Drills for basic implant bed preparation
Alignment Pin and Depth Gauges positioned next to the respective drills
SCS Screwdrivers for Ratchet
SCS Screwdrivers for Handpiece
Adapters for Ratchet
Round Burs
** To increase the length of the instrument, use the Drill Extender (040.563).
1
2
3
4
5
69
8
7
1. Tweezers2. Holding Key3. Ratchet4. Ratchet5. Torque Control Device for
Ratchet6. Diagnostic T
7. Distance Indicator for Stan-dard Plus (RN, WN, NNC) or Bone Level Tapered (NC, RC)
8. Distance Indicator for Stan-dard Plus (RN, WN, NNC) or Bone Level Tapered (NC, RC)
9. Tweezers for instruments
Lower tray
Smart Product Descriptions
Straumann® Smart
3
The Drill Extender The Straumann® Drill Extender (Art. No. 040.563) can be used with Straumann® Profile Drills to increase the overall instrument length by 15 mm. This might be relevant in situations where the length of the long Profile Drill is not sufficient.
ѹ Compatible with standard dental shaft drills ∅ 2.35 mm (latch-type) and handpieces
ѹ A spring lock engages the drill with a click to ensure a secure connection
ѹ Helps to gain access between long crowns of adjacent teeth
ѹ Can be stored in the extra spare holders of the cassette
ѹ Slim design for optimal access to surgical site
Drill Extender
Short drill with Drill Extender
Shortdrill
Smart Product Descriptions
Straumann® Smart
4
Upper tray set-upsThe upper tray of the Basic Surgical Cassette can be set up with any particular Straumann implant line. Based on the recommended surgi-cal procedure, you should place drills for basic implant bed prepara-tion, profile drills, and taps into the corresponding instrument holders of the cassette.
Set-up for the Standard Plus (SP) Implant Line
1
1
2 3 4 52 3 4 56
10
13
11
14
12
15
16 1816 18 20 2020 20
17 19 20 2020 2017 19
7 8 9
No. Art.-No. Article/Dimensions Material
1 044.022/044.004 Round Burs Stainless steel2 044.210/044.211 Pilot Drills ∅ 2.2 mm, short/long Stainless steel
3 044.214/044.215 Pilot Drills ∅ 2.8 mm, short/long Stainless steel
4 044.250/044.251 Twist Drills ∅ 3.5 mm, short/long Stainless steel
5 044.254/044.255 Twist Drills ∅ 4.2 mm, short/long Stainless steel
6 046.703 Alignment Pin ∅ 2.2 mm Titanium
7 046.704 or 046.705Depth Gauge with Distance Indicator Ø 2.2/2.8 mm or Depth Gauge Ø 2.8 mm
Titanium
8 046.706 Depth Gauge ∅ 3.5mm Titanium
9 046.707 Depth Gauge ∅ 4.2 mm Titanium
10 044.086 SP Profile Drill ∅ 2.8 mm, short* Stainless steel
11 044.088 SP Profile Drill ∅ 3.5 mm, short* Stainless steel
12 044.084 SP Profile Drill ∅ 4.2 mm, short* Stainless steel
13 044.575 S/SP Tap ∅ 3.3 mm Stainless steel/TAN
14 044.577 S/SP Tap ∅ 4.1 mm Stainless steel/TAN
15 044.579 S/SP Tap ∅ 4.8 mm Stainless steel/TAN
16 046.471/046.470 Adapters for Handpiece, short/extra short Stainless steel
17 046.461/046.460 Adapters for Ratchet, short/extra short Stainless steel
18 046.411/046.410 SCS Screwdrivers for Handpiece, short/extra short Cronidur® 30
19 046.401/046.400 SCS Screwdrivers for Ratchet, short/extra short Cronidur® 30
20Extra holders can be used for Drill Extender, Round Bur, longer versions of instruments, or extra Alignment Pins and Depth Gauges.
*To increase the length of the instrument, use the Drill Extender (040.563).
TAN = Titanium-aluminum-niobium alloy
Smart Product Descriptions
Straumann® Smart
5
Set-up for the Bone Level Tapered (BLT) Implant Line
1
1
2 3 4 52 3 4 56
10
13
11
14
12
15
16 1816 18 20 2020 20
17 19 20 2020 2017 19
7 8 9
*To increase the length of the instrument, use the Drill Extender (040.563).
No. Art.-No. Article/Dimensions Material
1 044.022/044.004 Round Burs Stainless steel
2 026.0001/026.0002 BLT Pilot Drills ∅ 2.2 mm, short/long Stainless steel
3 026.2200/026.2201 BLT Drills ∅ 2.8 mm, short/long Stainless steel
4 026.4200/026.4201 BLT Drills ∅ 3.5 mm, short/long Stainless steel
5 026.6200/026.6201 BLT Drills ∅ 4.2 mm, short/long Stainless steel
6 046.703 Alignment Pin ∅ 2.2 mm Titanium
7 046.704 or 046.705Depth Gauge with Distance Indicator Ø 2.2/2.8 mm or Depth Gauge Ø 2.8 mm
Titanium
8 046.706 Depth Gauge ∅ 3.5 mm Titanium
9 046.707 Depth Gauge ∅ 4.2 mm Titanium
10 026.0003 BLT Profile Drill ∅ 3.3 mm, short* Stainless steel
11 026.0005 BLT Profile Drill ∅ 4.1 mm, short* Stainless steel
12 026.0007 BLT Profile Drill ∅ 4.8 mm, short* Stainless steel
13 026.0009 BLT Tap ∅ 3.3 mm Stainless steel/TAN
14 026.0010 BLT Tap ∅ 4.1 mm Stainless steel/TAN
15 026.0011 BLT Tap ∅ 4.8 mm Stainless steel/TAN
16 046.471/046.470 Adapters for Handpiece, short/extra short Stainless steel
17 046.461/046.460 Adapters for Ratchet, short/extra short Stainless steel
18 046.411/046.410 SCS Screwdrivers for Handpiece, short/extra short Cronidur® 30
19 046.401/046.400 SCS Screwdrivers for Ratchet, short/extra short Cronidur® 30
20 Extra holders can be used for Drill Extender, Round Bur, longer versions of instruments, or extra Alignment Pins and Depth Gauges.
TAN = Titanium-aluminum-niobium alloy
Smart Product Descriptions
Straumann® Smart
DISCLAIMER Straumann® Smart is a blended training and education program focused on the education of gener-al dentists who want to become surgically active in the field of dental implantology. The program is limited to information pertaining to straightforward implant cases and focuses on a reduced port-folio of products that are suitable for the treatment of such cases.
All clinical Straumann® Smart content – such as texts, medical record forms, pictures and videos – was created in collaboration with Prof. Dr. Christoph Hämmerle, Prof. Dr. Ronald Jung, Dr. Francine Brandenberg-Lustenberger and Dr. Alain Fontolliet from the University of Zürich, Clinic for Fixed and Removable Prosthodontics and Dental Material Science, Switzerland.
Straumann does not give any guarantee that Straumann® Smart provides sufficient knowledge or instruction for the dental professional to become surgically active in the field of implantology. It is the dental professional’s sole responsibility to ensure that he/she has the appropriate knowledge and instruction before placing dental implants. Straumann® Smart does not replace a careful and thorough analysis of each individual patient by a dental professional. Further, it does not imply any guarantee or warranty with regard to complete-ness of the information provided to the patient. It does not replace the dental professional’s duty to inform the patient about the treatment, the products and the risks involved and to receive the patient’s informed consent. The dental professional is solely responsible for determining whether or not a treatment or product is suitable for a particular patient and circumstances. Knowledge of den-tal implantology and instruction in the handling of the relevant products is always necessary and the sole responsibility of the dental professional. The dental professional must always comply with the individual product’s Instructions For Use as well as all laws and regulations. STRAUMANN DISCLAIMS, TO THE EXTENT POSSIBLE BY LAW, ANY LIABILITY, EXPRESS OR IMPLIED, AND BEARS NO RESPONSIBILITY FOR ANY DIRECT, INDIRECT, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION PROVIDED TO PATIENTS, ERRORS IN PROFESSIONAL JUDGMENT, IN PRODUCT CHOICES OR PRACTICE IN THE USE OR INSTAL-LATION OF STRAUMANN PRODUCTS. All clinical content as well as clinical and radiographic images are provided by courtesy of Prof. Dr. Christoph Hämmerle, Prof. Dr. Ronald Jung, Dr. Francine Brandenberg-Lustenberger and Dr. Alain Fontolliet from the University of Zürich, Clinic for Fixed and Removable Prosthodontics and Dental Material Science, Switzerland.
International Headquarters Institut Straumann AG Peter Merian-Weg 12 CH-4002 Basel, Switzerland Phone +41 (0)61 965 11 11 Fax +41 (0)61 965 11 01 www.straumann.com
© Institut Straumann AG, 2016. All rights reserved.Cronidur® 30 is a registered trademark of Energietechnik Essen GmbH, Germany. Straumann® and/or other trademarks and logos from Straumann® mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. 49
0.19
6/en
/A/0
0 08
/16