Basic Stereo Instruction for Grampa

4
Basic Stereo Instruction To listen to CDs: Turn on “POWER” on the Receiver Turn on “POWER” on the CD Player If “CD” is not shown on the display, press “Input » Press “PLAY” on the CD player If you want to listen to a different CD, press “DISC” buttons Adjust the “VOLUME” and enjoy! To shut off: Press “STOP” on the CD Player

description

Instructions on how to use a Yamaha stereo with button configuration as shown

Transcript of Basic Stereo Instruction for Grampa

Page 1: Basic Stereo Instruction for Grampa

Basic Stereo Instruction

To listen to CDs:

Turn on “POWER” on the Receiver Turn on “POWER” on the CD Player If “CD” is not shown on the display, press “Input »” Press “PLAY” on the CD player If you want to listen to a different CD, press “DISC” buttons Adjust the “VOLUME” and enjoy!

To shut off:

Press “STOP” on the CD Player Turn off “POWER” on the Receiver

Page 2: Basic Stereo Instruction for Grampa

To Change CDs:

If CD Player is not already on, turn on “POWER” Press “OPEN” to open CD Tray Add and remove CDs Press “OPEN” again to close CD Tray

To Listen to Radio:

Turn on “POWER” on the Receiver If “TUNER” is not shown on the display, press “« Input” Select Favorite station by pressing “Preset” buttons

Speaker A is Living Room; Speaker B is Kitchen/SunroomVolume 40-50 is generally appropriate.

Auxiliary input is Line 1. Volume is lower than other inputs, so adjust accordingly, but remember to set it back!