(Basic Monitoring Device) - ASUNIMasunim.co/images/downloads/auto-consumption/green... · e-mail:...
1
DESCRIPTION The BMD is compatible with the most common and popular inverters in the market (PowerOne, SMA, Solarmax, Fronius, Kostal, Ingeteam, Schneider, Aros-Riello, GP Tech, etc.). It works for any size of PV systems. It modulates the power constantly, optimizing the production of the PV system relative to the existing instant real consumption, taking advantage of all the available energy required (with an accuracy of 99%). The BMD controls in every moment the energy injected to the system preventing any injection activities to the grid. Even in extreme situations of any malfunction of BMD, the system ensures ZERO INJECTION to the grid, because it counts with a security system for switching off the inverters. This system works through a digital output that activates an industrial contactor. It records the data of the installation and sends it to a server (3G or Ethernet connection) to constantly check the power produced, the consumption and the electricity savings. At the same time, through this connection, GPM can access the system in the event of any incident, damage or necessary reprogramming of the device and can prevent the zero injection to the public grid should the sale to the grid become a future option. e-mail: [email protected] OFFICIAL DISTRIBUTOR HARDWARE BMD (Basic Monitoring Device) The only one that uses % 99 of the kW produced ENTRANCES POWER CONSUMPTION DIMENSIONS One analog entrance for irradiation measurement 300 grams weight Feed in 230V - 50Hz Average of 3W full performance Two communication interfaces RS-485 A digital output of 0-3,3V 10.5cm x 9cm x 6cm (lenght x width x height) KEY FEATURES - Able to monitor a communication port of the inverter - Second RS-485 input available for monitoring meteorological station. - Ethernet interface for sending information to GPM servers - The Ethernet interface can also be used for configuration of the internal website - Easy installation and configuration - If there is no possibility to use broadband, GPRS/3G routers can be used. - Via the grid analyzer, the BMD adjusts energy output to real time consumption in less than 2 seconds WARRANTY into the public grid ZERO INJECTION
Transcript of (Basic Monitoring Device) - ASUNIMasunim.co/images/downloads/auto-consumption/green... · e-mail:...
DESCRIPTION
The BMD is compatible with the most common and popular inverters in the market (PowerOne, SMA, Solarmax, Fronius, Kostal, Ingeteam,
Schneider, Aros-Riello, GP Tech, etc.). It works for any size of PV systems.
It modulates the power constantly, optimizing the production of the PV system relative to the existing instant real consumption, taking
advantage of all the available energy required (with an accuracy of 99%).
The BMD controls in every moment the energy injected to the system preventing any injection activities to the grid.
Even in extreme situations of any malfunction of BMD, the system ensures ZERO INJECTION to the grid, because it counts with a security
system for switching off the inverters. This system works through a digital output that activates an industrial contactor.
It records the data of the installation and sends it to a server (3G or Ethernet connection) to constantly check the power produced, the
consumption and the electricity savings. At the same time, through this connection, GPM can access the system in the event of any
incident, damage or necessary reprogramming of the device and can prevent the zero injection to the public grid should the sale to the grid
become a future option.
e-mail: [email protected]
OFFICIAL DISTRIBUTOR
HARDWARE BMD(Basic Monitoring Device)
The only one that uses %99 of the kW produced
ENTRANCES POWER CONSUMPTION DIMENSIONS
One analog entrance for irradiation measurement
300 grams weight
Feed in 230V - 50Hz Average of 3W full performance
Two communication interfaces RS-485
A digital output of 0-3,3V
10.5cm x 9cm x 6cm (lenght x width x height)
KEY FEATURES
- Able to monitor a communication port of the inverter
- Second RS-485 input available for monitoring meteorological station.
- Ethernet interface for sending information to GPM servers
- The Ethernet interface can also be used for configuration of the internal website
- Easy installation and configuration
- If there is no possibility to use broadband, GPRS/3G routers can be used.
- Via the grid analyzer, the BMD adjusts energy output to real time consumption in
less than 2 seconds
WARRANTY
into the public grid
ZEROINJECTION
