BASES AND SUPPORT - National Office Furniture

BASES AND SUPPORT

Span Between Table Legs 640Base Requirements 641Base Units 645“L” Adjustable Height Bases 676“L” Worksurfaces 684

BASESAND

SUPPORT

BASES AND SUPPORT

639NATIONAL OFFICE FURNITURE—CASEGOODS 2

SPAN BETWEEN TABLE LEGS

For leg-based applications, the maximum recommended spanof an unsupported 13⁄16" thick worksurface is 48" between legs.The maximum recommended span of an unsupported 19⁄16"thick worksurface is 60" between legs. Additional support isrecommended for deflection for longer distances. When usingmobile legs with tops that are 60" and greater, undersupportrails are recommended.

RECTANGULAR WORKSURFACESRECOMMENDED SPAN BETWEEN LEGS FOR STABILITY AND VISUAL APPEARANCE

LENGTH 13⁄16" WORKSURFACE 19⁄16" WORKSURFACEC-LEG / T-LEG COLUMN LEG C-LEG / T-LEG COLUMN LEG

96"84"72"66"60"54"48"42"

N/AN/A48"48"42"36"30"24"

N/AN/A48"48"48"46"40"34"

N/AN/A48"48"42"36"30"24"

N/AN/A48"48"48"46"40"34"

U-SHAPED WORKSURFACERECOMMENDED SPAN BETWEEN LEGS

LENGTH 13⁄16" WORKSURFACE 19⁄16" WORKSURFACEC-LEG / T-LEG COLUMN LEG C-LEG / T-LEG COLUMN LEG

60"48"

40"283⁄16"

401⁄16"281⁄8"

40"283⁄16"

401⁄16"281⁄8"

See table/base matrix for specific base options (pages 641-644)For leg-based training applications, use Undersurface Support Rail for extra support and deflection on 60", 66" and 72"worksurfaces. (See page 673)

DIMENSION KEYD DepthW WidthH HeightA Overhang: Approach SideKW Kneespace WidthDI DiameterBA

SES

AND

SUPP

ORT

BASES AND SUPPORT

640 NATIONAL OFFICE FURNITURE—CASEGOODS 2

BASE REQUIREMENTS 18" D

48" - 72"

24" D

48" - 72"

30" D, 36" D

48" - 72" 48" & 60"

3" SquareSupport Base

3" or 4" RoundSupport Base

(4) (4) (4) (3)

Static Column Mobile Column

(4)(N/A) for

mobile column(4) (4)

(3)(N/A) for

mobile column

Adjustable HeightColumn Pin Leg

Adjustable HeightMobile Column Pin Leg

(N/A) (4) (4) (N/A)

H-Style (24", 30", 36") U-Style (18", 24", 30", 36")

(2)(N/A) forH-Style

(2) (2) (N/A)

21" C-Legs (Static, Mobile, Adjustable Height)

(N/A) (2) (N/A) (N/A)


(N/A) (N/A)30" D (2)

36" D (N/A)(N/A)

21" Static T 21" Mobile T

(N/A) (2) (N/A) (N/A)

38" Static 4 Star 38" Mobile 4 Star

(N/A) (N/A) (N/A) (N/A)


(N/A) (N/A) (N/A) (N/A)


(N/A) (N/A) (N/A) (N/A)

BASESAND

SUPPORT

BASES AND SUPPORT


BASE REQUIREMENTS(CONTINUED)

24" D

48" - 72"

30" D

48" - 72"30" x 24", 24" x 24"30" x 30", 24" x 30"

30", 36",42" or 48"

30", 36",42" or 48"

3" SquareSupport Base

3" or 4" RoundSupport Base

(4) (4) (N/A)36", 42" and 48" (4)

30" (N/A)

36", 42" and 48" (4)

30" (N/A)

Static Column Mobile Column

(4) (4) (N/A)36", 42" and 48" (4)

30" (N/A)36", 42" and 48" (4)

30" (N/A)

Adjustable HeightColumn Pin Leg

Adjustable HeightMobile Column Pin Leg

(4) (4) (N/A)36", 42" and 48" (4)

30" (N/A)36", 42" and 48" (4)

30" (N/A)

H-Style (24", 30", 36") U-Style (18", 24", 30", 36")

(N/A) (N/A) (N/A) (N/A) (N/A)


(2) (N/A) (N/A) (N/A) (N/A)


(N/A) (2) (N/A) (N/A) (N/A)

21" Static T 21" Mobile T

(2) (N/A) (N/A) (N/A) (N/A)


(N/A) (N/A) (N/A)30" and 36" (N/A)42" and 48" (1)

30" and 36" (N/A)42" and 48" (1)


(N/A) (N/A) (N/A)36" (1)

30", 42" and 48" (N/A)36" (1)

30", 42" and 48" (N/A)


(N/A) (N/A) (N/A)30" (1)

36", 42" and 48" (N/A)30" (1)

36", 42" and 48" (N/A)BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT



18" D

48" - 72"

24" D

48" - 72"

30" D, 36" D

48" - 72" 48" & 60"

32" CounterHeight

32" BarHeight

32" AdjustableHeight

(N/A) (N/A) (N/A) (N/A)

27" Counter Height 27" Bar Height

(N/A) (N/A) (N/A) (N/A)

Electric Adjustable Base30" and 24" models

(N/A)(1) for 24" models

(N/A) for 30" models(1) for 30" models

(N/A) for 24" models(N/A)

Manual (Hand Crank) Adjustable Height Base30" and 24" models

(N/A)(1) for 24" models

(N/A) for 30" models(1) for 30" models

(N/A) for 24" models(N/A)

22" Disc BaseBar, Counter,

Occasional Table Hts

22" Soft Square BaseBar, Counter,


(N/A) (2)(2) for 30" D

(N/A) for 36" D(N/A)

27" Disc BaseBar, Counter Heights

27" Soft Square BaseBar, Counter Heights

(N/A) (N/A) (2) (N/A)

22"/27" Disc BaseWorksurface Height

(N/A)(2) for 22" base

(N/A) for 27" base(2) (N/A)

22"/27" Soft Square BaseWorksurface Height

(N/A)(2) for 22" base

(N/A) for 27" base(2) (N/A)

BASESAND

SUPPORT

BASES AND SUPPORT



24" D, 30"D, 36"D

48" - 72"30" x 24", 24" x 24"30" x 30", 24" x 30"

30", 36",42" or 48"

30", 36",42" or 48"

32" CounterHeight

32" BarHeight

32" AdjustableHeight

(N/A) (N/A)36" (1)

30", 42" and 48" (N/A)

36" (1)

30", 42" and 48" (N/A)

27" Counter Height 27" Bar Height

(N/A) (N/A)30" (1)

36", 42" and 48" (N/A)30" (1)

36", 42" and 48" (N/A)

Electric Adjustable Base30" and 24" models

(N/A) (N/A) (N/A) (N/A)

Manual (Hand Crank) Adjustable Height Base30" and 24" models

(N/A) (N/A) (N/A) (N/A)

22" Disc BaseBar, Counter,


22" Soft Square BaseBar, Counter,


(2) for 24" D, 30" D(N/A) for 36" D

(N/A)30" (1)

36", 42" and 48" (N/A)30" and 36" (1)

42" and 48" (N/A)

27" Disc BaseBar, Counter Heights

27" Soft Square BaseBar, Counter Heights

(2) for 36" D(N/A) for

24" D and 30" D(N/A)

30" and 36" (1)42" and 48" (N/A)

30" and 36" (1)42" and 48" (N/A)

22"/27" Disc BaseWorksurface Height

(2) for 22" base(2) for 27" base

with 36" D(N/A) for 27" base with

24" D and 30" D

(N/A)30" and 36" (1)

42" and 48" (N/A)30" and 36" (1)

42" and 48" (N/A)

22"/27" Soft Square BaseWorksurface Height

(2) for 22" base(2) for 27" base

with 36" D(N/A) for 27" base with

24" D and 30" D

(N/A)30" and 36" (1)

42" and 48" (N/A)30" and 36" (1)

42" and 48" (N/A)

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT


PRODUCT SPECIFICATIONS• Refer to base/table matrix on pages 641-644 forrecommended worksurface and base applications

TO ORDER, SPECIFY:1. Model Number2. Wire Management Cutout

(if applicable)3. Paint Color (if applicable)4. Finish (if applicable)

SAMPLE MODEL NUMBERS:NAC0428SFRNBNAC2804SFBW

CUL 501TF

MODEL NO./DESCRIPTIONLISTPRICE

DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

4" SUPPORT BASE ROUND DI H

NAC0428SFRNB Metal $ 259 4 — 273⁄4-291⁄4 — 10 lbs. 1.0

NAC2804SFBW Wood 700 4 — 273⁄4-291⁄4 — 6 lbs. 1.0

• Adjustable glide standard• Metal base, specify paint colors: (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or

(503) Satin Nickel Metallic• Metal base, optional upper and lower (CUL) wire management cutout• Wood base, specify finish: Brighton (IM), Natural (NM), Honey (HN), Caramel (CL), Truffle (TF), Autumn (AC), Amber (MC),

Cordovan (CW), Judicial (DW), Mocha (MH)• SIN 33721

3" SUPPORT BASE ROUND NAC0328SFRNB $ 197 3 — 273⁄4-291⁄4 — 8 lbs. 0.8

• Adjustable glide standard• Optional upper and lower (CUL) wire management cutout• Optional paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or

(503) Satin Nickel Metallic• SIN 33721

3" SUPPORT BASE ROUNDCOUNTER HEIGHT

NAC0334SFRNB $ 299 3 — 341⁄16 — — 10 lbs. 1.0



3" SUPPORT BASE ROUNDBAR HEIGHT

NAC0340SFRNB $ 339 3 — 403⁄8 — — 11 lbs. 1.1



BASESAND

SUPPORT

BASES AND SUPPORT




(if applicable)3. Paint Color (if applicable)4. Finish (if applicable)

SAMPLE MODEL NUMBER:NAC0328SFSQB CUL 501


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

3" SUPPORT BASE SQUARE NAC0328SFSQB $ 197 3 3 273⁄4-291⁄4 — 8 lbs. 0.8



3" SUPPORT BASE SQUARECOUNTER HEIGHT

NAC0334SFSQB $ 299 3 3 341⁄16 — — 10 lbs. 1.0



3" SUPPORT BASE SQUAREBAR HEIGHT

NAC0340SFSQB $ 339 3 3 403⁄8 — — 11 lbs. 1.1



2" SUPPORT BASE SQUARE NAC0228SFSQB $ 163 2 2 273⁄4 — — 6 lbs. 0.6

• Adjustable glide standard• Not intended for use with U- and P-shaped desks with modesty• Optional upper and lower (CUL) wire management cutout• Optional paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or


BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT




(if applicable)3. Column Paint Color

SAMPLE MODEL NUMBER:CBV0228COBP CUL 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

NON-DEFACINGCOLUMN LEG KIT

WWSBNDF Cinder $ 62 — — — — — 1 lbs. 0.3

• Allows attachment of column to metal modesty panel without defacing the column• Available in 4 paint options: Designer White (405), Cinder (462), Platinum Metallic (501) and Satin Nickel Metallic (503)• SIN 33721

SUPPORT BASE BRACKET NAC04BKT $ 31 5⁄8 411⁄16 — — — 1 lbs. 0.2

• Support Base Bracket to be used when attaching any Round or Square Support Base to a Full Wood or Laminate Modesty Panel whenusing WaveWorks components

• Bracket is black in color and is attached to the underside of the round or square support base and the modesty panel• SIN 33721

COLUMN LEG STATIC DI W H

CBV0228COBP $ 136 2 — 273⁄4 — — 6 lbs. 0.6

• Adjustable glide standard• Some assembly required• Sold 1 per box• Optional upper and lower (CUL) wire management cutout• Optional paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or


COLUMN LEG MOBILE CBV0228COBMP $ 163 2 — 273⁄4 — — 6 lbs. 0.6

• Dual wheel locking caster• Some assembly required• Sold 1 per box• Optional upper and lower (CUL) wire management cutout• Optional paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or


BASESAND

SUPPORT

BASES AND SUPPORT





SAMPLE MODEL NUMBER:CBV0228COA2BP CUL 265 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

ADJUSTABLE HEIGHTCOLUMN PIN LEGSTATIC

DI H

CBV0228COA2BP $ 271 11⁄2 — 245⁄8-335⁄8 — 6 lbs. 0.6

• Sold 2 per box• Weight limit of 200 pounds if concentrated; 326 pounds if weight is distributed• Optional paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or


ADJUSTABLE HEIGHTCOLUMN PIN LEGMOBILE

CBV0228COA2BMP $ 299 11⁄2 — 263⁄8-353⁄8 — 6 lbs. 0.6

• Sold 2 per box• Weight limit of 200 pounds if concentrated; 326 pounds if weight is distributed• Optional paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or


WOOD HALF SUPPORT BASE D W H A KW

NAC2812SHB Wood Half Support Base $ 876 6 117⁄8 273⁄4 — — 13 lbs. 2.6

• Adjustable glide standard• Specify finish: Brighton (IM), Natural (NM), Honey (HN), Caramel (CL), Truffle (TF), Autumn (AC), Amber (MC), Cordovan (CW), Judicial (DW),

Mocha (MH)• For use with P- and U-shaped surfaces• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT




(if applicable)3. Column Paint Color4. Foot Paint Color

(if applicable)

SAMPLE MODEL NUMBERS:CBV4028XBMPCBV3241XBP

CUX

265 462462 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

X BASE WORKSURFACE HEIGHT,MOBILE

CBV4028XBMP $ 987 — 381⁄16 273⁄4 — — 36 lbs. 12.0

CBV3228XBMP 759 — 3115⁄16 273⁄4 — — 33 lbs. 12.0

CBV2728XBMP 647 — 275⁄16 273⁄4 — — 33 lbs. 12.0

• Dual wheel locking casters• Some assembly required• Reference pages 641-644 for table base guide• Optional upper (CU) base column wire management• Specify base column and base foot paint colors• SIN 33721

X BASE COUNTER HEIGHT CBV3235XBP $ 986 21⁄2 32 3313⁄16 — — 32 lbs. 12.0

CBV2735XBP 840 21⁄2 275⁄16 3313⁄16 — — 32 lbs. 12.0

• Adjustable glides standard• Some assembly required• Reference pages 641-644 for table base guide• Optional upper (CU) base column wire management• Specify base column and base foot paint colors• SIN 33721

X BASE BAR HEIGHT CBV3241XBP $ 1084 21⁄2 32 4013⁄16 — — 33 lbs. 14.0

CBV2741XBP 921 21⁄2 275⁄16 4013⁄16 — — 33 lbs. 14.0


ADJUSTABLE HEIGHT BASEMOBILE

CBV3226XBAB Cinder $ 2456 21⁄2 32 26-4013⁄16 — 33 lbs. 12.0

CBV3226XBAS Platinum Metallic 2456 21⁄2 32 26-4013⁄16 — 33 lbs. 12.0

CBV3226XBAN Satin Nickel Metallic 2456 21⁄2 32 26-4013⁄16 — 33 lbs. 12.0

• Some assembly required• Paddle arm release allows pneumatic adjustment• Locking casters only• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT




(if applicable)3. Column Paint Color4. Foot Paint Color

(if applicable)

SAMPLE MODEL NUMBER:CBV4028XBP X 462 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

X BASE WORKSURFACE HEIGHT CBV4028XBP $ 946 — 381⁄16 273⁄4 — — 36 lbs. 12.0

CBV3228XBP 708 — 3115⁄16 273⁄4 — — 33 lbs. 12.0

CBV2728XBP 601 — 275⁄16 273⁄4 — — 33 lbs. 12.0


C-LEG BASESTATIC

DI W H

CBV2728CL2BP $ 759 21⁄2 269⁄16 273⁄4 — — 30 lbs. 7.2

CBV2128CL2BP 680 21⁄2 201⁄2 273⁄4 — — 26 lbs. 2.8

• Adjustable glides standard• Some assembly required• Sold 2 per box• Grommets should be field installed on surfaces utilizing a C-leg• Optional upper and lower (CUL) wire management cutout• Optional column and foot paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic,

or (503) Satin Nickel Metallic• SIN 33721

C-LEG BASEMOBILE

CBV2728CL2BMP $ 794 21⁄2 269⁄16 273⁄4 — — 30 lbs. 7.2

CBV2128CL2BMP 714 21⁄2 201⁄2 273⁄4 — — 26 lbs. 2.8

• Dual wheel locking casters• Some assembly required• Sold 2 per box• Grommets should be field installed on surfaces utilizing a C-leg• Optional upper and lower (CUL) wire management cutout• Optional column and foot paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic,


BASIC C-LEG BASESTATIC

CBV2728CL1 Black $ 339 2 269⁄16 273⁄4 — — 10 lbs. 3.8

CBV2728CL1S Platinum Metallic 339 2 269⁄16 273⁄4 — — 10 lbs. 3.8

CBV2128CL1 Black $ 312 2 201⁄2 273⁄4 — — 9 lbs. 3.0

CBV2128CL1S Platinum Metallic 312 2 201⁄2 273⁄4 — — 9 lbs. 3.0

• Adjustable glides standard• Grommets should be field installed on surfaces utilizing a C Leg• Sold 1 per box• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT





(if applicable)4. Foot Paint Color

(if applicable)

SAMPLE MODEL NUMBERS:CBV2728CLM1CBV2128TL2BP CUL 501 501


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

BASIC C-LEG BASEMOBILE

CBV2728CLM1 Black $ 365 2 269⁄16 273⁄4 — — 10 lbs. 3.8

CBV2728CLM1S Platinum Metallic 365 2 269⁄16 273⁄4 — — 10 lbs. 3.8

CBV2128CLM1 Black $ 331 2 201⁄2 273⁄4 — — 9 lbs. 3.0

CBV2128CLM1S Platinum Metallic 331 2 201⁄2 273⁄4 — — 9 lbs. 3.0

• Dual wheel locking casters• Grommets should be field installed on surfaces utilizing a C Leg• Sold 1 per box• SIN 33721

ADJUSTABLE HEIGHTSTATIC C-LEGPIN ADJUSTMENT

CBV2628CLA2B Cinder $ 1149 21⁄4 263⁄4 243⁄4-335⁄8 — 11 lbs. 7.2

CBV2628CLA2S Platinum Metallic 1149 21⁄4 263⁄4 243⁄4-335⁄8 — 11 lbs. 7.2

CBV2628CLA2N Satin Nickel Metallic 1149 21⁄4 263⁄4 243⁄4-335⁄8 — 11 lbs. 7.2

CBV2128CLA2B Cinder $ 1071 21⁄4 213⁄4 243⁄4-335⁄8 — 11 lbs. 2.8

CBV2128CLA2S Platinum Metallic 1071 21⁄4 213⁄4 243⁄4-335⁄8 — 11 lbs. 2.8

CBV2128CLA2N Satin Nickel Metallic 1071 21⁄4 213⁄4 243⁄4-335⁄8 — 11 lbs. 2.8

• Sold 2 per box• Ships fully assembled• Grommets should be field installed on surfaces utilizing a C-leg• SIN 33721

T-LEG BASESTATIC

DI W H

CBV2128TL2BP $ 680 21⁄2 201⁄2 273⁄4 — — 28 lbs. 5.6

• Adjustable glides standard• Some assembly required• Sold 2 per box• Optional upper and lower (CUL) wire management cutout• Optional column and foot paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic,


T-LEG BASEMOBILE

CBV2128TL2BMP $ 714 21⁄2 201⁄2 273⁄4 — — 28 lbs. 5.6

• Dual wheel locking casters• Some assembly required• Sold 2 per box• Optional upper and lower (CUL) wire management cutout• Optional column and foot paint colors available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic,


BASESAND

SUPPORT

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number

SAMPLE MODEL NUMBER:CBV2128T1


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

BASIC T-LEG BASESTATIC

CBV2128T1 Black $ 312 2 201⁄2 273⁄4 — — 10 lbs. 3.0

CBV2128T1S Platinum Metallic 312 2 201⁄2 273⁄4 — — 10 lbs. 3.0

• Adjustable glides standard• Sold 1 per box• SIN 33721

BASIC T-LEG BASEMOBILE

CBV2128TM1 Black $ 331 2 201⁄2 273⁄4 — — 10 lbs. 3.0

CBV2128TM1S Platinum Metallic 331 2 201⁄2 273⁄4 — — 10 lbs. 3.0

• Dual wheel locking casters• Sold 1 per box• SIN 33721

BASIC FOLDING LEG CBV2128TF (Set) Black $ 928 2 201⁄2 273⁄4 — — 21 lbs. 2.3

• Includes 2 legs per carton• Folding leg to be used with 24", 30", and 36" deep worksurfaces• Folding leg to be used on all 48", 54" and 60" long worksurfaces• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT



Shaded model numbers are available on our “To You in 10 Days or Less” Quick Delivery program and will be delivered in 10 days or less.

TO ORDER, SPECIFY:1. Model Number2. Column Paint Color


(if applicable)

SAMPLE MODEL NUMBER:CBV2715DRNBP 265 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

DISC BASEOCCASIONAL TABLE HEIGHT

CBV2715DRNBP $ 934 3 273⁄16 16 — — 60 lbs. 1.9

CBV2215DRNBP 705 3 22 16 — — 43 lbs. 1.9

• 3" column base• Some assembly required• Reference Base Requirements Chart on pages 643-644• Glide adjustment of +/– 1⁄8"• Optional column paint color available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic,

or (503) Satin Nickel Metallic• Optional base paint color available in (405) Designer White, (423) Concrete, (462) Cinder, (463) Iron, (501) Platinum Metallic, or

(503) Satin Nickel Metallic• NON-CONTRACT/OPEN MARKET

SOFT SQUARE BASEOCCASIONAL TABLE HEIGHT

CBV2715DSQBP $ 1087 3 273⁄16 16 — — 60 lbs. 1.9

CBV2215DSQBP 856 3 22 16 — — 50 lbs. 1.9




DISC BASEWORKSURFACE HEIGHT

CBV2728DRNBP $ 994 3 273⁄16 277⁄16 — — 73 lbs. 2.8

CBV2228DRNBP 744 3 22 277⁄16 — — 56 lbs. 2.8




SOFT SQUARE BASEWORKSURFACE HEIGHT

CBV2728DSQBP $ 1149 3 273⁄16 277⁄16 — — 84 lbs. 2.8

QCBV2228DSQBP 896 3 22 277⁄16 — — 63 lbs. 2.8

CBV2228DSQBP 896 3 22 277⁄16 — — 63 lbs. 2.8



(503) Satin Nickel Metallic• NON-CONTRACT/OPEN MARKET BASES

ANDSUPPORT

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Column Paint Color


(if applicable)

SAMPLE MODEL NUMBER:CBV2735DRNBP 265 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

DISC BASECOUNTER HEIGHT

CBV2735DRNBP $ 1073 3 273⁄16 35 — — 75 lbs. 3.4

CBV2235DRNBP 1035 3 22 35 — — 58 lbs. 3.4




SOFT SQUARECOUNTER HEIGHT

CBV2735DSQBP $ 1227 3 273⁄16 35 — — 86 lbs. 3.4

CBV2235DSQBP 1187 3 22 35 — — 65 lbs. 3.4




DISC BASEBAR HEIGHT

CBV2740DRNBP $ 1149 3 273⁄16 403⁄4 — — 76 lbs. 3.8

CBV2240DRNBP 1109 3 22 403⁄4 — — 59 lbs. 3.8




SOFT SQUARE BASEBAR HEIGHT

CBV2740DSQBP $ 1300 3 273⁄16 403⁄4 — — 87 lbs. 3.8

CBV2240DSQBP 1262 3 22 403⁄4 — — 66 lbs. 3.8




BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT




SAMPLE MODEL NUMBER:CBV3628HBB


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE H-STYLE CBV3628HBC Concrete $ 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628HBB Cinder 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628HBI Iron 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628HBS Platinum Metallic 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628HBN Satin Nickel Metallic 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628HBH Designer White 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3028HBC Concrete $ 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028HBB Cinder 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028HBI Iron 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028HBS Platinum Metallic 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028HBN Satin Nickel Metallic 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028HBH Designer White 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV2428HBC Concrete $ 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428HBB Cinder 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428HBI Iron 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428HBS Platinum Metallic 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428HBN Satin Nickel Metallic 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428HBH Designer White 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

• Specify model number only• 2 6" x 6" mounting plates are attached to each H-style base• H-style support bases are not recommended for use with U- or P-shaped worksurfaces• Adjustable glides are standard• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT






DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE H-STYLECOUNTER HEIGHT

CBV3634HBC Concrete $ 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634HBB Cinder 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634HBI Iron 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634HBS Platinum Metallic 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634HBN Satin Nickel Metallic 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634HBH Designer White 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3034HBC Concrete $ 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034HBB Cinder 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034HBI Iron 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034HBS Platinum Metallic 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034HBN Satin Nickel Metallic 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034HBH Designer White 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV2434HBC Concrete $ 887 2 21 34 — — 18 lbs. 3.9

CBV2434HBB Cinder 887 2 21 34 — — 18 lbs. 3.9

CBV2434HBI Iron 887 2 21 34 — — 18 lbs. 3.9

CBV2434HBS Platinum Metallic 887 2 21 34 — — 18 lbs. 3.9

CBV2434HBN Satin Nickel Metallic 887 2 21 34 — — 18 lbs. 3.9

CBV2434HBH Designer White 887 2 21 34 — — 18 lbs. 3.9

• Not intended to use in Table Desking Application• Recommended for use with WaveWorks or Epic component surfaces when hanging off Exhibit Wall Rail• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT






DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE H-STYLEBAR HEIGHT

CBV3640HBC Concrete $ 1089 2 331⁄16 4015⁄16 — — 25 lbs. 5.1

CBV3640HBB Cinder 1089 2 331⁄16 4015⁄16 — — 25 lbs. 5.1

CBV3640HBI Iron 1089 2 331⁄16 4015⁄16 — — 25 lbs. 5.1

CBV3640HBS Platinum Metallic 1089 2 331⁄16 4015⁄16 — — 25 lbs. 5.1

CBV3640HBN Satin Nickel Metallic 1089 2 331⁄16 4015⁄16 — — 25 lbs. 5.1

CBV3640HBH Designer White 1089 2 331⁄16 4015⁄16 — — 25 lbs. 5.1

CBV3040HBC Concrete $ 1041 2 271⁄16 4015⁄16 — — 24 lbs. 4.9

CBV3040HBB Cinder 1041 2 271⁄16 4015⁄16 — — 24 lbs. 4.9

CBV3040HBI Iron 1041 2 271⁄16 4015⁄16 — — 24 lbs. 4.9

CBV3040HBS Platinum Metallic 1041 2 271⁄16 4015⁄16 — — 24 lbs. 4.9

CBV3040HBN Satin Nickel Metallic 1041 2 271⁄16 4015⁄16 — — 24 lbs. 4.9

CBV3040HBH Designer White 1041 2 271⁄16 4015⁄16 — — 24 lbs. 4.9

CBV2440HBC Concrete $ 979 2 21 4015⁄16 — — 22 lbs. 4.7

CBV2440HBB Cinder 979 2 21 4015⁄16 — — 22 lbs. 4.7

CBV2440HBI Iron 979 2 21 4015⁄16 — — 22 lbs. 4.7

CBV2440HBS Platinum Metallic 979 2 21 4015⁄16 — — 22 lbs. 4.7

CBV2440HBN Satin Nickel Metallic 979 2 21 4015⁄16 — — 22 lbs. 4.7

CBV2440HBH Designer White 979 2 21 4015⁄16 — — 22 lbs. 4.7

• Not intended to use in Table Desking Application• May be used with Epic 40" high storage units to support a surface• Recommended for use with WaveWorks or Epic component surfaces when hanging off Exhibit Wall Rail• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT





SAMPLE MODEL NUMBER:CBV3628UB


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE U-STYLE CBV3628UC Concrete $ 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628UB Cinder 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628UI Iron 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628US Platinum Metallic 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628UN Satin Nickel Metallic 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3628UH Designer White 713 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3028UC Concrete $ 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028UB Cinder 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV3028UI Iron 681 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5





CBV2428UC Concrete $ 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428UB Cinder 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428UI Iron 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428US Platinum Metallic 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428US Platinum Metallic 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428UN Satin Nickel Metallic 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV2428UH Designer White 641 11⁄2 21 273⁄4 — — 15 lbs. 3.3

CBV1828UC Concrete $ 598 11⁄2 151⁄8 273⁄4 — — 13 lbs. 3.0

CBV1828UB Cinder 598 11⁄2 151⁄8 273⁄4 — — 13 lbs. 3.0

CBV1828UI Iron 598 11⁄2 151⁄8 273⁄4 — — 13 lbs. 3.0




• Specify model number only• 2 6" x 6" mounting plates are attached to each U-style base• U-style support bases are not recommended for use with U- or P-shaped worksurfaces• Adjustable glides are standard• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT






DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE U-STYLECOUNTER HEIGHT

CBV3634UC Concrete $ 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634UB Cinder 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634UI Iron 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634US Platinum Metallic 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634UN Satin Nickel Metallic 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3634UH Designer White 988 2 331⁄16 34 — — 22 lbs. 4.5

CBV3034UC Concrete $ 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034UB Cinder 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034UI Iron 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034US Platinum Metallic 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034UN Satin Nickel Metallic 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV3034UH Designer White 945 2 271⁄16 34 — — 21 lbs. 4.3

CBV2434UC Concrete $ 887 2 21 34 — — 18 lbs. 3.9

CBV2434UB Cinder 887 2 21 34 — — 18 lbs. 3.9

CBV2434UI Iron 887 2 21 34 — — 18 lbs. 3.9

CBV2434US Platinum Metallic 887 2 21 34 — — 18 lbs. 3.9

CBV2434UN Satin Nickel Metallic 887 2 21 34 — — 18 lbs. 3.9

CBV2434UH Designer White 887 2 21 34 — — 18 lbs. 3.9

• Not intended to use in Table Desking Application• Recommended for use with WaveWorks or Epic component surfaces when hanging off Exhibit Wall Rail• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT






DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE U-STYLEBAR HEIGHT

CBV3640UC Concrete $ 1089 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3640UB Cinder 1089 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3640UI Iron 1089 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3640US Platinum Metallic 1089 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3640UN Satin Nickel Metallic 1089 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3640UH Designer White 1089 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3040UC Concrete $ 1041 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV3040UB Cinder 1041 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV3040UI Iron 1041 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV3040US Platinum Metallic 1041 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV3040UN Satin Nickel Metallic 1041 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV3040UH Designer White 1041 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV2440UC Concrete $ 979 2 21 405⁄16 — — 22 lbs. 4.7

CBV2440UB Cinder 979 2 21 405⁄16 — — 22 lbs. 4.7

CBV2440UI Iron 979 2 21 405⁄16 — — 22 lbs. 4.7

CBV2440US Platinum Metallic 979 2 21 405⁄16 — — 22 lbs. 4.7

CBV2440UN Satin Nickel Metallic 979 2 21 405⁄16 — — 22 lbs. 4.7

CBV2440UH Designer White 979 2 21 405⁄16 — — 22 lbs. 4.7

• Not intended to use in Table Desking Application• May be used with Epic 40" high storage units to support a surface• Recommended for use with WaveWorks or Epic component surfaces when hanging off Exhibit Wall Rail• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Resin Insert Grade/Color3. Metal Insert Color4. Veneer Insert Finish5. Base Color

SAMPLE MODEL NUMBERS:CBV3628OAMCBV3628OMMCBV3634OAMCBV3634OMMCBV3634OWM

15011405CL

1677 5015011677 462462462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE U-STYLEWITH INSERT

CBV3628OAM shown

CBV3628OMMshown

CBV3628OWMshown

RESIN INSERT GRADE 1

CBV3628OAM $ 959 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3028OAM 914 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV2428OAM 858 11⁄2 21 273⁄4 — — 15 lbs. 3.3

METAL INSERTLISTPRICE

CBV3628OMM $ 959 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3028OMM 914 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV2428OMM 858 11⁄2 21 273⁄4 — — 15 lbs. 3.3

VENEER INSERT

CBV3628OWM $ 1526 11⁄2 331⁄16 273⁄4 — — 18 lbs. 3.7

CBV3028OWM 1349 11⁄2 271⁄16 273⁄4 — — 17 lbs. 3.5

CBV2428OWM 1174 11⁄2 21 273⁄4 — — 15 lbs. 3.3

• 2 6" x 6" mounting plates are attached to each U-style base• U-style support bases are not recommended for use with U- or P-shaped worksurfaces• Adjustable glides are standard• Metal base and metal base inserts are available in 6 paint options: Designer White (405), Concrete (423), Cinder (462), Iron (463),

Platinum Metallic (501), and Satin Nickel Metallic (503)• SIN 33721

SUPPORT BASE U-STYLEWITH INSERTCOUNTER HEIGHT

CBV3634OAM shown

CBV3634OMMshown

CBV3634OWMshown


CBV3634OAM $ 1333 2 331⁄16 34 — — 22 lbs. 4.5

CBV3034OAM 1271 2 271⁄16 34 — — 21 lbs. 4.3

CBV2434OAM 1196 2 21 34 — — 18 lbs. 4.9


CBV3634OMM $ 1333 2 331⁄16 34 — — 22 lbs. 4.5

CBV3034OMM 1271 2 271⁄16 34 — — 21 lbs. 4.3

CBV2434OMM 1196 2 21 34 — — 18 lbs. 3.9

VENEER INSERT

CBV3634OWM $ 2031 2 331⁄16 34 — — 22 lbs. 4.5

CBV3034OWM 1818 2 271⁄16 34 — — 21 lbs. 4.3

CBV2434OWM 1587 2 21 34 — — 18 lbs. 3.9

• Not intended to use in Table Desking Application• Recommended for use with WaveWorks or Epic component surfaces when hanging off Exhibit Wall Rail• Metal base and metal base inserts are available in 6 paint options: Designer White (405), Concrete (423), Cinder (462), Iron (463), Platinum Metallic (501),

and Satin Nickel Metallic (503)• Clear Walnut (EW) is available on veneer insert• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Resin Insert Grade/Color3. Metal Insert Color4. Veneer Insert Finish5. Base Color

SAMPLE MODEL NUMBERS:CBV3640OAMCBV3640OMMCBV3640OWM

1501CL

1677 501501462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE U-STYLEWITH INSERTBAR HEIGHT

CBV3640OAM shown

CBV3640OMMshown

CBV3640OWMshown


CBV3640OAM $ 1470 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3040OAM 1400 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV2440OAM 1314 2 21 405⁄16 — — 22 lbs. 4.7


CBV3640OMM $ 1470 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3040OMM 1400 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV2440OMM 1314 2 21 405⁄16 — — 22 lbs. 4.7

VENEER INSERT

CBV3640OWM $ 2303 2 331⁄16 405⁄16 — — 25 lbs. 5.1

CBV3040OWM 2050 2 271⁄16 405⁄16 — — 24 lbs. 4.9

CBV2440OWM 1783 2 21 405⁄16 — — 22 lbs. 4.7

• Not intended to use in Table Desking Application• May be used with Epic 40" high storage units to support a surface• Recommended for use with WaveWorks or Epic component surfaces when hanging off Exhibit Wall Rail• Metal base and metal base inserts are available in 6 paint options: Designer White (405), Concrete (423), Cinder (462), Iron (463),

Platinum Metallic (501), and Satin Nickel Metallic (503)• Clear Walnut (EW) is available on veneer insert• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT





SAMPLE MODEL NUMBER:NAC3606SESB


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

END SUPPORT BASE NAC3606SESC Concrete $ 344 2 331⁄16 51⁄8 — — 5 lbs. 0.9

NAC3606SESB Cinder 344 2 331⁄16 51⁄8 — — 5 lbs. 0.9

NAC3606SESI Iron 344 2 331⁄16 51⁄8 — — 5 lbs. 0.9

NAC3606SESS Platinum Metallic 344 2 331⁄16 51⁄8 — — 5 lbs. 0.9

NAC3606SESN Satin Nickel Metallic 344 2 331⁄16 51⁄8 — — 5 lbs. 0.9

NAC3606SESH Designer White 344 2 331⁄16 51⁄8 — — 5 lbs. 0.9

NAC3605SESC Concrete $ 344 2 331⁄16 43⁄4 — — 5 lbs. 0.9


NAC3605SESI Iron 344 2 331⁄16 43⁄4 — — 5 lbs. 0.9






NAC3006SESI Iron 328 2 271⁄16 51⁄8 — — 4 lbs. 0.9






NAC3005SESI Iron 328 2 271⁄16 43⁄4 — — 4 lbs. 0.9




NAC2406SESC Concrete $ 307 2 21 51⁄8 — — 4 lbs. 0.8

NAC2406SESB Cinder 307 2 21 51⁄8 — — 4 lbs. 0.8

NAC2406SESI Iron 307 2 21 51⁄8 — — 4 lbs. 0.8

NAC2406SESS Platinum Metallic 307 2 21 51⁄8 — — 4 lbs. 0.8

NAC2406SESN Satin Nickel Metallic 307 2 21 51⁄8 — — 4 lbs. 0.8

NAC2406SESH Designer White 307 2 21 51⁄8 — — 4 lbs. 0.8

• Some assembly required• Specify with worksurfaces when overlapping box/file height storage, end support base will sit on box/file height storage and support

worksurface height worksurfaces• 51⁄8" H to be used with 13⁄16" worksurfaces• 43⁄4" H to be used with 19⁄16" worksurfaces• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT




SAMPLE MODEL NUMBER:NAC2405SESB


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

END SUPPORT BASE(CONTINUED)

NAC2405SESC Concrete $ 307 2 21 43⁄4 — — 4 lbs. 0.8

NAC2405SESB Cinder 307 2 21 43⁄4 — — 4 lbs. 0.8

NAC2405SESI Iron 307 2 21 43⁄4 — — 4 lbs. 0.8

NAC2405SESS Platinum Metallic 307 2 21 43⁄4 — — 4 lbs. 0.8

NAC2405SESN Satin Nickel Metallic 307 2 21 43⁄4 — — 4 lbs. 0.8

NAC2405SESH Designer White 307 2 21 43⁄4 — — 4 lbs. 0.8



NAC1806SESI Iron 288 2 151⁄8 51⁄8 — — 4 lbs. 0.7






NAC1805SESI Iron 288 2 151⁄8 43⁄4 — — 4 lbs. 0.7




• Some assembly required• Specify with worksurfaces when overlapping box/file height storage, end support base will sit on box/file height storage and support worksurface

height worksurfaces• 51⁄8" H to be used with 13⁄16" worksurfaces• 43⁄4" H to be used with 19⁄16" worksurfaces• SIN 33721

SUPPORT PANEL U-STYLE NAC1228UBC Concrete $ 500 11⁄2 12 28 — — 12 lbs. 3.1

NAC1228UBB Cinder 500 11⁄2 12 28 — — 12 lbs. 3.1

NAC1228UBI Iron 500 11⁄2 12 28 — — 12 lbs. 3.1

NAC1228UBS Platinum Metallic 500 11⁄2 12 28 — — 12 lbs. 3.1

NAC1228UBN Satin Nickel Metallic 500 11⁄2 12 28 — — 12 lbs. 3.1

NAC1228UBH Designer White 500 11⁄2 12 28 — — 12 lbs. 3.1

• For use as added support• Adjustable glides are standard• Specify model number only• Metal mounting plate attached to support panel• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT




SAMPLE MODEL NUMBER:26N5928DVOBS


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

EPICENTERDOUBLE DEPTH BASE

26N5928DVOBB shown

26N5928DVOBB Cinder $ 1226 2 571⁄4 273⁄4 — — 38 lbs. 8.4

26N5928DVOBS Platinum Metallic 1226 2 571⁄4 273⁄4 — — 38 lbs. 8.4

26N5928DVOBN Satin Nickel Metallic 1226 2 571⁄4 273⁄4 — — 38 lbs. 8.4

26N5928DVOBH Designer White 1226 2 571⁄4 273⁄4 — — 38 lbs. 8.4





• Not for use with Conference Table• See Specification Guide for proper application• SIN 33721

EPICENTERDOUBLE DEPTH BASEWITH INSERT

26N5928DVOBAM shown

26N5928DVOBMM shown


26N5928DVOBAM $ 1643 2 571⁄4 273⁄4 — — 30 lbs. 6.1

26N4728DVOBAM 1546 2 451⁄16 273⁄4 — — 24 lbs. 4.8

26N2928DVOBAM 914 2 271⁄16 273⁄4 — — 15 lbs. 3.0

26N2328DVOBAM 858 2 21 273⁄4 — — 12 lbs. 2.4


26N5928DVOBMM $ 1643 2 571⁄4 273⁄4 — — 30 lbs. 6.1

26N4728DVOBMM 1546 2 451⁄16 273⁄4 — — 24 lbs. 4.8

26N2928DVOBMM 914 2 271⁄16 273⁄4 — — 15 lbs. 3.0

26N2328DVOBMM 858 2 21 273⁄4 — — 12 lbs. 2.4

VENEER INSERT

26N5928DVOBWM $ 2430 2 571⁄4 273⁄4 — — 30 lbs. 6.1

26N4728DVOBWM 2114 2 451⁄16 273⁄4 — — 24 lbs. 4.8

26N2928DVOBWM 1349 2 271⁄16 273⁄4 — — 15 lbs. 3.0

26N2328DVOBWM 1174 2 21 273⁄4 — — 12 lbs. 2.4

• Not for use with Conference Table• See Specification Guide for proper application• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Paint Color

SAMPLE MODEL NUMBERS:26N5906DVOBBCBV367240HBK 405


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

EPICENTERDOUBLE DEPTH BASE

26N5906DVOBB shown





NAC5905SESB Cinder $ 589 2 571⁄4 51⁄16 — — 9 lbs. 2.0








NAC4705SESB Cinder $ 554 2 451⁄16 43⁄4 — — 8 lbs. 1.4




• Specify model number only• 26N models can be used to support the Epicenter at worksurface height off of lower storage• SIN 33721

SUPPORT BASE KITH-STYLEBAR HEIGHT

CBV367240HBK $ 3267 331⁄16 65 403⁄8 — 60 69 lbs. 7.8

CBV366640HBK 3251 331⁄16 59 403⁄8 — 54 68 lbs. 7.7

CBV366040HBK 3225 331⁄16 53 403⁄8 — 48 66 lbs. 7.6

CBV307240HBK $ 3121 271⁄16 65 403⁄8 — 60 60 lbs. 6.6

CBV306640HBK 3104 271⁄16 59 403⁄8 — 54 59 lbs. 6.5

CBV306040HBK 3081 271⁄16 53 403⁄8 — 48 57 lbs. 6.4

CBV305440HBK 3060 271⁄16 471⁄16 403⁄8 — 421⁄16 54 lbs. 6.3

CBV304840HBK 3038 271⁄16 471⁄16 403⁄8 — 361⁄16 51 lbs. 6.2

CBV247240HBK $ 2933 21 65 403⁄8 — 60 51 lbs. 5.5

CBV246640HBK 2916 21 59 403⁄8 — 54 50 lbs. 5.4

CBV246040HBK 2895 21 53 403⁄8 — 48 48 lbs. 5.3

CBV245440HBK 2876 21 471⁄16 403⁄8 — 421⁄16 45 lbs. 5.2

CBV244840HBK 2853 21 471⁄16 403⁄8 — 361⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV367240HBK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Specify paint color 405 Designer White, 462 Cinder, 501 Platinum Metallic, or 503 Satin Nickel Metallic• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit H-style• SIN 33721BA

SES

AND

SUPP

ORT

BASES AND SUPPORT




SAMPLE MODEL NUMBER:CBV367234HBK 405


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE KITH-STYLECOUNTER HEIGHT

CBV367234HBK $ 2968 36 72 34 — — 55 lbs. 6.8

CBV366634HBK 2946 36 66 34 — — 68 lbs. 7.7

CBV366034HBK 2927 36 60 34 — — 66 lbs. 7.6

CBV307234HBK $ 2834 30 72 34 — — 60 lbs. 6.6

CBV306634HBK 2816 30 66 34 — — 59 lbs. 6.5

CBV306034HBK 2797 30 60 34 — — 57 lbs. 6.4

CBV305434HBK 2780 30 54 34 — — 54 lbs. 6.3

CBV304834HBK 2758 30 48 34 — — 51 lbs. 6.2

CBV247234HBK $ 2663 24 72 34 — — 51 lbs. 5.5

CBV246634HBK 2646 24 66 34 — — 50 lbs. 5.4

CBV246034HBK 2628 24 60 34 — — 48 lbs. 5.3

CBV245434HBK 2611 24 54 34 — — 45 lbs. 5.2

CBV244834HBK 2592 24 48 34 — — 42 lbs. 5.1

• Base Kits include 2 bases and stretcher rails• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Specify paint color 405 Designer White, 462 Cinder, 501 Platinum Metallic, or 503 Satin Nickel Metallic• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit H-style• SIN 33721

SUPPORT BASE KITU-STYLEBAR HEIGHT

CBV367240UK $ 3267 331⁄16 65 403⁄8 — 59 69 lbs. 7.8

CBV366640UK 3251 331⁄16 59 403⁄8 — 53 68 lbs. 7.7

CBV366040UK 3225 331⁄16 53 403⁄8 — 47 66 lbs. 7.6

CBV307240UK $ 3121 271⁄16 65 403⁄8 — 59 60 lbs. 6.6

CBV306640UK 3104 271⁄16 59 403⁄8 — 53 59 lbs. 6.5

CBV306040UK 3081 271⁄16 53 403⁄8 — 47 57 lbs. 6.4

CBV305440UK 3060 271⁄16 471⁄16 403⁄8 — 411⁄16 54 lbs. 6.3

CBV304840UK 3038 271⁄16 471⁄16 403⁄8 — 351⁄16 51 lbs. 6.2

CBV247240UK $ 2933 21 65 403⁄8 — 59 51 lbs. 5.5

CBV246640UK 2916 21 59 403⁄8 — 53 50 lbs. 5.4

CBV246040UK 2895 21 53 403⁄8 — 53 48 lbs. 5.3

CBV245440UK 2876 21 471⁄16 403⁄8 — 411⁄16 45 lbs. 5.2

CBV244840UK 2853 21 471⁄16 403⁄8 — 351⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV367240UK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Specify paint color 405 Designer White, 423 Concrete, 462 Cinder, 463 Iron, 501 Platinum Metallic, or 503 Satin Nickel Metallic• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit U-style• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT




SAMPLE MODEL NUMBER:CBV367234UK 405


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE KITU-STYLECOUNTER HEIGHT

CBV367234UK $ 2968 331⁄16 65 341⁄16 — 59 55 lbs. 6.8

CBV366634UK 2946 331⁄16 59 341⁄16 — 53 68 lbs. 7.7

CBV366034UK 2927 331⁄16 53 341⁄16 — 47 66 lbs. 7.6

CBV307234UK $ 2834 271⁄16 65 341⁄16 — 59 60 lbs. 6.6

CBV306634UK 2816 271⁄16 59 341⁄16 — 53 59 lbs. 6.5

CBV306034UK 2797 271⁄16 53 341⁄16 — 47 57 lbs. 6.4

CBV305434UK 2780 271⁄16 471⁄16 341⁄16 — 411⁄16 54 lbs. 6.3

CBV304834UK 2758 271⁄16 411⁄16 341⁄16 — 351⁄16 51 lbs. 6.2

CBV247234UK $ 2663 21 65 341⁄16 — 59 51 lbs. 5.5

CBV246634UK 2646 21 59 341⁄16 — 53 50 lbs. 5.4

CBV246034UK 2628 21 53 341⁄16 — 47 48 lbs. 5.3

CBV245434UK 2611 21 471⁄16 341⁄16 — 411⁄16 45 lbs. 5.2

CBV244834UK 2592 21 411⁄16 341⁄16 — 351⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV36724UK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Specify paint color 405 Designer White, 423 Concrete, 462 Cinder, 463 Iron, 501 Platinum Metallic, or 503 Satin Nickel Metallic• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit U-style• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Resin Insert Grade/Color3. Base Color

SAMPLE MODEL NUMBER:CBV367234UAK 1677 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASEKIT U-STYLE WITH INSERTCOUNTER HEIGHT

CBV367234UAK shown


CBV367234UAK $ 4002 331⁄6 65 341⁄16 — 59 55 lbs. 6.8

CBV366634UAK 3976 331⁄6 59 341⁄16 — 53 68 lbs. 7.7

CBV366034UAK 3947 331⁄6 53 341⁄16 — 47 66 lbs. 7.6

CBV307234UAK $ 3817 271⁄6 65 341⁄16 — 59 60 lbs. 6.6

CBV306634UAK 3792 271⁄6 59 341⁄16 — 53 59 lbs. 6.5

CBV306034UAK 3766 271⁄6 53 341⁄16 — 47 57 lbs. 6.4

CBV305434UAK 3741 271⁄6 471⁄16 341⁄16 — 411⁄16 54 lbs. 6.3

CBV304834UAK 3715 271⁄6 411⁄16 341⁄16 — 351⁄16 51 lbs. 6.2

CBV247234UAK $ 3585 21 65 341⁄16 — 59 51 lbs. 5.5

CBV246634UAK 3560 21 59 341⁄16 — 53 50 lbs. 5.4

CBV246034UAK 3536 21 53 341⁄16 — 47 48 lbs. 5.3

CBV245434UAK 3512 21 471⁄16 341⁄16 — 411⁄16 45 lbs. 5.2

CBV244834UAK 3490 21 411⁄16 341⁄16 — 351⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV367234UAK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit U-style• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Metal Insert Color3. Veneer Insert Finish4. Base Color

SAMPLE MODEL NUMBERS:CBV367234UMKCBV367234UWK

405CL

462462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE KITU-STYLE WITH INSERTCOUNTER HEIGHT(CONTINUED)

CBV367234UMK shown

CBV367234UWK shown

METAL INSERT

CBV367234UMK $ 4002 331⁄16 65 341⁄16 — 59 55 lbs. 6.8

CBV366634UMK 3976 331⁄16 59 341⁄16 — 53 68 lbs. 7.7

CBV366034UMK 3947 331⁄16 53 341⁄16 — 47 66 lbs. 7.6

CBV307234UMK $ 3817 271⁄16 65 341⁄16 — 59 60 lbs. 6.6

CBV306634UMK 3792 271⁄16 59 341⁄16 — 53 59 lbs. 6.5

CBV306034UMK 3766 271⁄16 53 341⁄16 — 47 57 lbs. 6.4

CBV305434UMK 3741 271⁄16 471⁄16 341⁄16 — 411⁄16 54 lbs. 6.3

CBV304834UMK 3715 271⁄16 411⁄16 341⁄16 — 351⁄16 51 lbs. 6.2

CBV247234UMK $ 3585 21 65 341⁄16 — 59 51 lbs. 5.5

CBV246634UMK 3560 21 59 341⁄16 — 53 50 lbs. 5.4

CBV246034UMK 3536 21 53 341⁄16 — 47 48 lbs. 5.3

CBV245434UMK 3512 21 471⁄16 341⁄16 — 411⁄16 45 lbs. 5.2

CBV244834UMK 3490 21 411⁄16 341⁄16 — 351⁄16 42 lbs. 5.1

VENEER INSERT

CBV367234UWK $ 6088 331⁄16 65 341⁄16 — 59 55 lbs. 6.8

CBV366634UWK 6048 331⁄16 59 341⁄16 — 53 68 lbs. 7.7

CBV366034UWK 6006 331⁄16 53 341⁄16 — 47 66 lbs. 7.6

CBV307234UWK $ 5446 271⁄16 65 341⁄16 — 59 60 lbs. 6.6

CBV306634UWK 5410 271⁄16 59 341⁄16 — 53 59 lbs. 6.5

CBV306034UWK 5374 271⁄16 53 341⁄16 — 47 57 lbs. 6.4

CBV305434UWK 5337 271⁄16 471⁄16 341⁄16 — 411⁄16 54 lbs. 6.3

CBV304834UWK 5302 271⁄16 411⁄16 341⁄16 — 351⁄16 51 lbs. 6.2

CBV247234UWK $ 4758 21 65 341⁄16 — 59 51 lbs. 5.5

CBV246634UWK 4727 21 59 341⁄16 — 53 50 lbs. 5.4

CBV246034UWK 4694 21 53 341⁄16 — 47 48 lbs. 5.3

CBV245434UWK 4663 21 471⁄16 341⁄16 — 411⁄16 45 lbs. 5.2

CBV244834UWK 4629 21 411⁄16 341⁄16 — 351⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV367234UMK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit U-style• Metal base and metal base inserts are available in 6 paint options: Designer White (405), Concrete (423), Cinder (462), Iron (463),


BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Resin Insert Grade/Color3. Base Color

SAMPLE MODEL NUMBER:CBV367240UAK 1677 462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE KITU-STYLE WITH INSERTBAR HEIGHT

CBV367240UAK shown


CBV367240UAK $ 4402 331⁄6 65 403⁄8 — 59 69 lbs. 7.8

CBV366640UAK 4372 331⁄6 59 403⁄8 — 53 68 lbs. 7.7

CBV366040UAK 4344 331⁄6 53 403⁄8 — 47 66 lbs. 7.6

CBV307240UAK $ 4200 271⁄6 65 403⁄8 — 59 60 lbs. 6.6

CBV306640UAK 4171 271⁄6 59 403⁄8 — 53 59 lbs. 6.5

CBV306040UAK 4143 271⁄6 53 403⁄8 — 47 57 lbs. 6.4

CBV305440UAK 4115 271⁄6 471⁄16 403⁄8 — 411⁄16 54 lbs. 6.3

CBV304840UAK 4087 271⁄6 411⁄16 403⁄8 — 351⁄16 51 lbs. 6.2

CBV247240UAK $ 3945 21 65 403⁄8 — 59 51 lbs. 5.5

CBV246640UAK 3918 21 59 403⁄8 — 53 50 lbs. 5.4

CBV246040UAK 3892 21 53 403⁄8 — 47 48 lbs. 5.3

CBV245440UAK 3865 21 471⁄16 403⁄8 — 411⁄8 45 lbs. 5.2

CBV244840UAK 3839 21 411⁄16 403⁄8 — 351⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV367240UAK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit U-style• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT



TO ORDER, SPECIFY:1. Model Number2. Metal Insert Color3. Veneer Insert Finish4. Base Color

SAMPLE MODEL NUMBERS:CBV367240UMKCBV367240UWK

405CL

462462


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

SUPPORT BASE KITU-STYLE WITH INSERTBAR HEIGHT(CONTINUED)

CBV367240UMK shown

CBV367240UWK shown

METAL INSERT

CBV367240UMK $ 4402 331⁄16 65 403⁄8 — 59 69 lbs. 7.8

CBV366640UMK 4372 331⁄16 59 403⁄8 — 53 68 lbs. 7.7

CBV366040UMK 4344 331⁄16 53 403⁄8 — 47 66 lbs. 7.6

CBV307240UMK $ 4200 271⁄16 65 403⁄8 — 59 60 lbs. 6.6

CBV306640UMK 4171 271⁄16 59 403⁄8 — 53 59 lbs. 6.5

CBV306040UMK 4143 271⁄16 53 403⁄8 — 47 57 lbs. 6.4

CBV305440UMK 4115 271⁄16 471⁄16 403⁄8 — 411⁄16 54 lbs. 6.3

CBV304840UMK 4087 271⁄16 411⁄16 403⁄8 — 351⁄16 51 lbs. 6.2

CBV247240UMK $ 3945 21 65 403⁄8 — 59 51 lbs. 5.5

CBV246640UMK 3918 21 59 403⁄8 — 53 50 lbs. 5.4

CBV246040UMK 3892 21 53 403⁄8 — 47 48 lbs. 5.3

CBV245440UMK 3865 21 471⁄16 403⁄8 — 411⁄16 45 lbs. 5.2

CBV244840UMK 3839 21 411⁄16 403⁄8 — 351⁄16 42 lbs. 5.1

VENEER INSERT

CBV367240UWK $ 6913 331⁄16 65 403⁄8 — 59 69 lbs. 7.8

CBV366640UWK 6866 331⁄16 59 403⁄8 — 53 68 lbs. 7.7

CBV366040UWK 6818 331⁄16 53 403⁄8 — 47 66 lbs. 7.6

CBV307240UWK $ 6154 271⁄16 65 403⁄8 — 59 60 lbs. 6.6

CBV306640UWK 6113 271⁄16 59 403⁄8 — 53 59 lbs. 6.5

CBV306040UWK 6072 271⁄16 53 403⁄8 — 47 57 lbs. 6.4

CBV305440UWK 6033 271⁄16 471⁄16 403⁄8 — 411⁄16 54 lbs. 6.3

CBV304840UWK 5990 271⁄16 411⁄16 403⁄8 — 351⁄16 51 lbs. 6.2

CBV247240UWK $ 5346 21 65 403⁄8 — 59 51 lbs. 5.5

CBV246640UWK 5311 21 59 403⁄8 — 53 50 lbs. 5.4

CBV246040UWK 5279 21 53 403⁄8 — 47 48 lbs. 5.3

CBV245440UWK 5239 21 471⁄16 403⁄8 — 411⁄16 45 lbs. 5.2

CBV244840UWK 5203 21 411⁄16 403⁄8 — 351⁄16 42 lbs. 5.1

• Reference the Base Kit model number to specify the appropriate rectangular worksurface size (ex. CBV367240UWK uses a 36x72 top)• Each base includes 2 6" x 6" mounting plates• Intended to be used with rectangular component surfaces from WaveWorks or Epic• Adjustable glides are standard• Intended to use same size rectangular top as size of base kit• Assembly required• Cannot specify a left, right, or center grommet on worksurfaces when using with a support base kit U-style• Metal base and metal base inserts are available in 6 paint options: Designer White (405), Concrete (423), Cinder (462), Iron (463),


BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT





SAMPLE MODEL NUMBER:NAC03WM


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

UNDERSURFACEWIRE MANAGER

NAC03WM Black Plastic (Set of 5) $ 39 51⁄4 25⁄8 13⁄4 — — 3 lbs. 0.1

• Not recommended for use with WaveWorks flip/nest training tables• SIN 33721

MESH WIRE MANAGER NAC0318WMM Black $ 121 3 171⁄2 — — — 2 lbs. 0.1

• Applicable to all 21⁄2" diameter C, T and X bases• Wraps around leg and is secured with Velcro®• SIN 33721

VERTICAL WIRE MANAGER NAC0318WMV Cinder $ 246 3 18 — — — 2 lbs. 0.1

NAC0318WMVS Platinum Metallic 246 3 18 — — — 2 lbs. 0.1

NAC0318WMVN Satin Nickel Metallic 246 3 18 — — — 2 lbs. 0.1

• Applicable to all 21⁄2" diameter C, T and X bases• Clamps to leg; no hardware required• SIN 33721

UNDERSURFACE SUPPORT RAIL(WORKSURFACE)

QNAC0248SUR $ 242 23⁄4 48 1 — — 5 lbs. 0.5

NAC0248SUR 242 23⁄4 48 1 — — 5 lbs. 0.5

QNAC0236SUR 207 23⁄4 36 1 — — 3 lbs. 0.3

NAC0236SUR 207 23⁄4 36 1 — — 3 lbs. 0.3

• Specify model number only• Model recommended for use when the weight on the table has a uniform weight above 125 lbs. or if the span between table legs or

support structures is greater than 48" on a 13⁄16" worksurface and greater than 60" on a 19⁄16" worksurface• Specify the 36" model to be used up to 66" worksurfaces• Specify the 48" model to be used up to 72" worksurfaces• Specify with worksurfaces when overlapping box/file height storage, sit on box/file height storage and supports worksurface height

worksurfaces• Rails are bulk packed per order. The pack may contain both sizes of rails• SIN 33721

WORKSURFACE TO STORAGEBRACKET

NACBRWSS Black $ 40 2 16 13⁄16 — — 2 lbs. 0.3

• Specify when supporting a surface ganged to vertical storage• Cannot be used with metal storage units• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT




SAMPLE MODEL NUMBER:CBV3072ABEB


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

ELECTRICADJUSTABLE HEIGHT BASE

CBV3072ABEB Cinder $ 2844 29 627⁄8 253⁄16-441⁄16 — 67 lbs. 2.3

CBV3072ABES Platinum Metallic 2844 29 627⁄8 253⁄16-441⁄16 — 67 lbs. 2.3

CBV3072ABEN Satin Nickel Metallic 2844 29 627⁄8 253⁄16-441⁄16 — 67 lbs. 2.3






















• Reference the model number to specify the approximate worksurface size (ex. CBV3072ABEB uses a 30 x 72 top)• For use with 30" and 24" WaveWorks and Epic worksurfaces• Rated for maximum of 250 lbs.• Some assembly required• All hardware and electrical included• 1 touch button allows for up/down adjustment• Electrical cord is 9' long (108")• Adjustable glides• SIN 33721

BASE

SAN

DSU

PPOR

T

BASES AND SUPPORT




SAMPLE MODEL NUMBER:CBV3072ABCB


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

MANUAL (HAND CRANK)ADJUSTABLE HEIGHT BASE

CBV3072ABCB Cinder $ 2293 29 627⁄8 253⁄16-431⁄2 — 67 lbs. 2.3

CBV3072ABCS Platinum Metallic 2293 29 627⁄8 253⁄16-431⁄2 — 67 lbs. 2.3

CBV3072ABCN Satin Nickel Metallic 2293 29 627⁄8 253⁄16-431⁄2 — 67 lbs. 2.3

CBV3066ABCB Cinder $ 2218 29 567⁄8 253⁄16-431⁄2 67 lbs. 2.3





CBV3060ABCN Satin Nickel Metallic 2141 29 507⁄8 253⁄16-431⁄2 65 lbs. 2.1















CBV2448ABCN Satin Nickel Metallic 1833 23 387⁄8 253⁄16-431⁄2 — 64 lbs. 21

• Reference the model number to specify the approximate worksurface size (ex. CBV3072ABCB uses a 30 x 72 top)• For use with 30" and 24" WaveWorks and Epic worksurfaces• Rated for maximum of 250 lbs.• Some assembly required• All hardware included• Hand crank takes 5 full turns per inch of adjustment• Adjustable glides• SIN 33721

BASESAND

SUPPORT

BASES AND SUPPORT


“L” ADJUSTABLE HEIGHT BASE AND WORKSURFACE MATRIX

Width AWid

th B

Depth ADepth B

• The “L” adjustable height base, extended corner component worksurface, and the rectangular component topworksurfaces are all specified separately; base can be used as right handed or left handed

• Extended corner can be ordered as left hand or right hand component tops• Extended corner component tops should be configured as an extension so there are worksurface mountingbrackets

• Rectangular component tops must be ordered in the vertical grain direction• Epic or WaveWorks component worksurfaces can be utilized with the “L” adjustable height bases• Rectangular component knife tops must be K1 models• Not recommended to modify the size of the top from the standard size• The following matrix shows what size extended corner worksurface and rectangular component top should bespecified when ordering the Adjustable Height “L” Base

ELECTRICALADJUSTABLE HEIGHT“L” BASE

BASE MODELNUMBER COLOR DEPTH A DEPTH B WIDTH A WIDTH B

EXTENDED CORNER(LEFT OR RIGHT)

RECTANGULARCOMPONENT TOP

CBV7272ALBEB Cinder 24 24 72 7236 x 72 24 x 3638 x 72 (K2) 26 x 36 (K1)

CBV7272ALBES Platinum Metallic 24 24 72 7236 x 72 24 x 3638 x 72 (K2) 26 x 36 (K1)

CBV7272ALBEN Satin Nickel Metallic 24 24 72 7236 x 72 24 x 3638 x 72 (K2) 26 x 36 (K1)
















BASE

SAN

DSU

PPOR

T“L”A

DJUS

TABL

EHE

IGHT

BASE

S

“L” ADJUSTABLE HEIGHT BASES


MANUAL(HAND CRANK)ADJUSTABLE HEIGHT“L” BASE

BASE MODELNUMBER COLOR DEPTH A DEPTH B WIDTH A WIDTH B

EXTENDED CORNER(LEFT OR RIGHT)

RECTANGULARCOMPONENT TOP

CBV7272ALBCB Cinder 24 24 72 7236 x 72 24 x 3638 x 72 (K2) 26 x 36 (K1)

CBV7272ALBCS Platinum Metallic 24 24 72 7236 x 72 24 x 3638 x 72 (K2) 26 x 36 (K1)

CBV7272ALBCN Satin Nickel Metallic 24 24 72 7236 x 72 24 x 3638 x 72 (K2) 26 x 36 (K1)
















BASESAND

SUPPORT“L”ADJUSTABLE

HEIGHTBASES





DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

ELECTRICALADJUSTABLE HEIGHT“L” BASE KIT

CBV7272ALBEB Cinder $ 4248 23 627⁄8 253⁄16-441⁄16 — 87 lbs. 3.1

CBV7272ALBES Platinum Metallic 4248 23 627⁄8 253⁄16-441⁄16 — 87 lbs. 3.1

CBV7272ALBEN Satin Nickel Metallic 4248 23 627⁄8 253⁄16-441⁄16 — 87 lbs. 3.1













• Rated for a maximum of 300 lbs.• Reference the matrix on pages 676-677 when specifying the Adjustable Height "L" Base Kit, extended corner component worksurface,

and the rectangular component top worksurface• Can be configured as right or left handed• Hold button in to move up and down• Electrical cord is 9' long (108")• Adjustable glides• SIN 33721

BASE

SAN

DSU

PPOR

T“L”A

DJUS

TABL

EHE

IGHT

BASE

S





DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

MANUAL (HAND CRANK)ADJUSTABLE HEIGHT“L” BASE KIT

CBV7272ALBCB Cinder $ 3197 23 627⁄8 253⁄16-431⁄2 — 87 lbs. 3.1

CBV7272ALBCS Platinum Metallic 3197 23 627⁄8 253⁄16-431⁄2 — 87 lbs. 3.1

CBV7272ALBCN Satin Nickel Metallic 3197 23 627⁄8 253⁄16-431⁄2 — 87 lbs. 3.1













• Rated for a maximum of 300 lbs.• Reference the matrix on pages 676-677 when specifying the Adjustable Height "L" Base Kit, extended corner component worksurface,

and the rectangular component top worksurface• Can be configured as right or left handed• Hand crank takes 5 full turns per inch of adjustment• Adjustable glides• SIN 33721

BASESAND

SUPPORT“L”ADJUSTABLE

HEIGHTBASES



WAVEWORKS PRODUCT SPECIFICATIONSWORKSURFACE• Laminate surfaces are 13⁄16" or 19⁄16" HPL (high pressure laminate) or 11⁄8" TFL (thermally fused laminate), and feature a 3mm PVC rim or 6 veneer rim options• Veneer surfaces are 13⁄16" plain sliced slipmatched cherry (Amber, Autumn, Mocha, Truffle) or maple veneer (Brighton, Caramel, Honey, Natural), plain slicedbookmatched walnut veneer (Cordovan, Judicial), quarter cut walnut veneer (Almond, Portobello, Sable), or quarter cut oak veneer (Sonoma). All veneer surfacesfeature a 3mm wood rim

FINISH APPLICATION• All Veneer surfaces feature a semi-open pore matte finish• When specifying Clear Walnut, a clear coat finish, the natural wood characteristics of walnut veneer are visible. These characteristics include, but are not limited to,color and woodgrain variation

RIM PROFILE OPTIONS

Softened Wood (F) Reed Wood (R) Cove Wood (P)*

Zip Wood (Z) Concave Wood (C)* Step Wood (T)*

Softened PVC (V) Reed PVC (N)*Not recommended with SM Sonoma

PVC REED RIMAC2 Autumn 2CL CaramelCW CordovanDW JudicialHN2 Honey 2MC AmberMH MochaNM NaturalTF Truffle

PVC SOFTENED RIMAC2 Autumn 2AD AlmondBZ BrazilwoodCI ChaiCL CaramelCW CordovanDW JudicialHN2 Honey 2IM BrightonKN KonaMC AmberMH MochaNM NaturalPB PortobelloPC PorciniPT PorticoSK SkylineSM SonomaTF TruffleWL Willow405 Designer White419 Wallaby425 Shadow440 Cloud457 Dapple461 Graphite462 Cinder478 Platinum Grey488 Frosty White491 Designer White Linear492 Cinder Linear792 Sable793 Acorn

WOOD RIMAC AutumnAD AlmondCL CaramelCW CordovanDW JudicialEW Clear WalnutHN HoneyIM BrightonMC AmberMH MochaNM NaturalPB PortobelloSM SonomaTF Truffle792 Sable

GALLERY PVC SOFTENED RIMGrade 1 – 5% upchargeG1001 CitadelG1011 PepperdustGrade 2 – 6% upchargeG1002 Planked Raw OakG1003 Evening NotteG1004 KirscheG1005 Midnight RunG1006 Sepia WalnutG1007 SerotinaG1008 TimelessG1009 White NebbiaG1012 Phantom Ecru

See page 22 for Gallery programdetails and upcharges

BASE

SAN

DSU

PPOR

T“L”C

ONFIGU

RATI

ONWOR

KSUR

FACE

S

“L” CONFIGURATION WAVEWORKS WORKSURFACES


WOOD FINISHESAC Autumn MC AmberAD Almond MH MochaCL Caramel NM NaturalCW Cordovan PB PortobelloDW Judicial SM SonomaEW Clear Walnut** TF TruffleHN Honey 792 SableIM Brighton

WORKSURFACE/MODESTYTYPEM MainE ExtensionF FillerM = 0 Connecting Worksurface Flat BracketsE = 2 Connecting Worksurface Flat BracketsF = 4 Connecting Worksurface Flat Brackets

LAMINATE WORKSURFACESWOODGRAIN LAMINATEAC2 Autumn 2AD AlmondBZ BrazilwoodCI ChaiCL CaramelCW CordovanDW JudicialHN2 Honey 2IM BrightonKN KonaMC Amber

NM NaturalPB PortobelloPC PorciniPT Portico*SK Skyline*SM SonomaTF TruffleWL Willow792 Sable793 Acorn*

*Not available on laminate/wood models**Acorn is the laminate complement toClear Walnut finish

SOLID LAMINATE405 Designer White419 Wallaby425 Shadow440 Cloud457 Dapple461 Graphite462 Cinder478 Platinum Grey488 Frosty White491 Designer White Linear492 Cinder Linear• CSL available; see page 22 forprogram details and upcharge

• CSL not available on TFL

PATTERN LAMINATE814 White Tigris818 Crisp Linen819 Flax Gauze821 Elemental Concrete822 Smoke Quarstone• Pattern laminates notavailable on TFL models

GALLERY LAMINATEGrade 1 – 5% upchargeG1001 CitadelG1011 PepperdustGrade 2 – 6% upchargeG1002 Planked Raw OakG1003 Evening NotteG1004 KirscheG1005 Midnight RunG1006 Sepia WalnutG1007 SerotinaG1008 TimelessG1009 White NebbiaG1012 Phantom Ecru

See page 22 for Gallery program details andupcharges

GROMMET OPTIONSIf no grommet is desired, specify an X (No Grommet)Round Grommet,Nylon Plastic

1¾"

2¾"

$30 list for each grommetG1L LeftG1R RightG1LR Left & RightG1C CenterG1LC Left & CenterG1RC Right & CenterG1A Left, Right & CenterRacetrack Grommet,Satin Nickel Metallic

223⁄32"

47⁄32"

$35 list for each grommetG11SNL LeftG11SNR RightG11SNLR Left & RightG11SNC CenterG11SNLC Left & CenterG11SNRC Right & CenterG11SNA Left, Right & CenterRacetrack Grommet,Cinder

223⁄32"

47⁄32"

$35 list for each grommetG11MBL LeftG11MBR RightG11MBLR Left & RightG11MBC CenterG11MBLC Left & CenterG11MBRC Right & CenterG11MBA Left, Right & Center

Racetrack Grommet,Platinum Metallic

223⁄32"

47⁄32"

$35 list for each grommetG11PLL LeftG11PLR RightG11PLLR Left & RightG11PLC CenterG11PLLC Left & CenterG11PLRC Right & CenterG11PLA Left, Right & Center

Cutout Option for 1 Touch Pivoting PowerGrommet$30 list upcharge per cutout location

5"

3¾"

CUT-G17L LeftCUT-G17R RightCUT-G17LR Left & RightCUT-G17C CenterCUT-G17LC Left & CenterCUT-G17RC Right & CenterCUT-G17A Left, Right & Center• Reference page 340 for cutout locations ofCUT-G17

NACG17AELPGB, NACG17AELPGS, andNACG17AELPGW (Sold Separately)

NACG17BELPGB, NACG17BELPGS, andNACG17BELPGW (Sold Separately)

NACG17CELPGB, NACG17CELPGS, andNACG17CELPGW (Sold Separately)

• Reference page 733 for pricing and details

NOTE: Interlink IQ units are available in theAccessories section

WORKSURFACE WIRE MANAGER COLORS403 Chamois 425 Shadow 462 Cinder405 Designer White 440 Cloud 478 Platinum Grey419 Wallaby 461 Graphite 485 Dark Chocolate

BASESAND

SUPPORT“L”CONFIGURATION

WORKSURFACES

“L” CONFIGURATION WAVEWORKS WORKSURFACES


EPIC PRODUCT SPECIFICATIONSWORKSURFACE• Laminate surfaces are 13⁄16" HPL (high pressure laminate), and feature a 3mm PVC or wood rim or a knife rim profile• Veneer surfaces are 13⁄16" plain sliced slipmatched cherry (Amber, Autumn, Mocha, Truffle) or maple veneer (Brighton, Caramel, Honey, Natural), plain slicedbookmatched walnut veneer (Cordovan, Judicial), or quarter cut walnut veneer (Almond, Portobello, Sable), or quarter cut oak veneer (Sonoma), and feature a 3mmwood rim or knife rim profile

• Knife rim surfaces available on 1 (K1) and/or 2 (K2) sides to simplify space planning

FINISH APPLICATION• All Veneer surfaces feature a semi-open pore matte finish

RIM PROFILE OPTIONS

Softened PVC (V) Softened Wood (F) Knife (K)

WOOD FINISHESAC AutumnAD AlmondCL CaramelCW CordovanDW JudicialHN HoneyIM BrightonMC AmberMH MochaNM NaturalPB PortobelloSM SonomaTF Truffle792 Sable

PVC SOFTENED RIMAC2 Autumn 2AD AlmondBZ BrazilwoodCI ChaiCL CaramelCW CordovanDW JudicialHN2 Honey 2IM BrightonKN KonaMC AmberMH MochaNM NaturalPB PortobelloPC PorciniPT PorticoSK SkylineSM SonomaTF TruffleWL Willow405 Designer White419 Wallaby425 Shadow440 Cloud457 Dapple461 Graphite462 Cinder478 Platinum Grey488 Frosty White491 Designer White Linear492 Cinder Linear792 Sable793 Acorn

WOOD RIMAC AutumnAD AlmondCL CaramelCW CordovanDW JudicialHN HoneyIM BrightonMC AmberMH MochaNM NaturalPB PortobelloSM SonomaTF Truffle792 Sable

GALLERY PVC SOFTENEDRIMGrade 1 – 5% upchargeG1001 CitadelG1011 PepperdustGrade 2 – 6% upchargeG1002 Planked Raw OakG1003 Evening NotteG1004 KirscheG1005 Midnight RunG1006 Sepia WalnutG1007 SerotinaG1008 TimelessG1009 White NebbiaG1012 Phantom Ecru

See page 22 for Gallery programdetails and upcharges

BASE

SAN

DSU

PPOR

T“L”C

ONFIGU

RATI

ONWOR

KSUR

FACE

S

“L” CONFIGURATION EPIC WORKSURFACES


LAMINATE WORKSURFACES

WOODGRAIN LAMINATEAC2 Autumn 2AD AlmondBZ BrazilwoodCI ChaiCL CaramelCW CordovanDW JudicialHN2 Honey 2IM BrightonKN KonaMC Amber

MH MochaNM NaturalPB PortobelloPC PorciniPT PorticoSK SkylineSM SonomaTF TruffleWL Willow792 Sable793 Acorn

SOLID LAMINATE405 Designer White419 Wallaby425 Shadow440 Cloud457 Dapple461 Graphite462 Cinder478 Platinum Grey488 Frosty White491 Designer White Linear492 Cinder Linear• CSL available; see page 22 forprogram details and upcharge

PATTERN LAMINATE814 White Tigris818 Crisp Linen819 Flax Gauze821 Elemental Concrete822 Smoke Quarstone

GALLERY LAMINATEGrade 1 – 5% upchargeG1001 CitadelG1011 PepperdustGrade 2 – 6% upchargeG1002 Planked Raw OakG1003 Evening NotteG1004 KirscheG1005 Midnight RunG1006 Sepia WalnutG1007 SerotinaG1008 TimelessG1009 White NebbiaG1012 Phantom Ecru

See page 22 for Gallery program detailsand upcharges

GROMMET OPTIONSIf no grommet is desired, specify an X (No Grommet)Round Grommet,Black Plastic

1¾"

2¾"

$30 list for each grommetG1L LeftG1R RightG1LR Left & RightG1C CenterG1LC Left & CenterG1RC Right & CenterG1A Left, Right & CenterRacetrack Grommet,Satin Nickel Metallic

223⁄32"

47⁄32"

$35 list for each grommetG11SNL LeftG11SNR RightG11SNLR Left & RightG11SNC CenterG11SNLC Left & CenterG11SNRC Right & CenterG11SNA Left, Right & Center

Racetrack Grommet,Cinder

223⁄32"

47⁄32"

$35 list for each grommetG11MBL LeftG11MBR RightG11MBLR Left & RightG11MBC CenterG11MBLC Left & CenterG11MBRC Right & CenterG11MBA Left, Right & CenterRacetrack Grommet,Platinum Metallic

223⁄32"

47⁄32"

$35 list for each grommetG11PLL LeftG11PLR RightG11PLLR Left & RightG11PLC CenterG11PLLC Left & CenterG11PLRC Right & CenterG11PLA Left, Right & Center

Cutout Option for 1 Touch Pivoting PowerGrommet$30 list upcharge per cutout location

5"

3¾"

CUT-G17L LeftCUT-G17R RightCUT-G17LR Left & RightCUT-G17C CenterCUT-G17LC Left & CenterCUT-G17RC Right & CenterCUT-G17A Left, Right & Center• Reference page 340 for cutout locations ofCUT-G17

NACG17AELPGB, NACG17AELPGS, andNACG17AELPGW (Sold Separately)

NACG17BELPGB, NACG17BELPGS, andNACG17BELPGW (Sold Separately)

NACG17CELPGB, NACG17CELPGS, andNACG17CELPGW (Sold Separately)

• Reference page 733 for pricing and details

NOTE: Interlink IQ units are available in theAccessories section

WORKSURFACE/MODESTY TYPEM MainE ExtensionF FillerM = 0 Connecting Worksurface Flat BracketsE = 2 Connecting Worksurface Flat BracketsF = 4 Connecting Worksurface Flat Brackets

WORKSURFACE WIRE MANAGER COLORS403 Chamois 425 Shadow 462 Cinder405 Designer White 440 Cloud 478 Platinum Grey419 Wallaby 461 Graphite 485 Dark Chocolate

BASESAND


WORKSURFACES

“L” CONFIGURATION EPIC WORKSURFACES


PRODUCT SPECIFICATIONS• Worksurfaces shipped with appropriate hardware byspecifying worksurface type; see the specificationguide for details

• Extended corner worksurfaces should be configuredas an extension so there are worksurface mountingbrackets

• Rim on all 4 sides of laminate and woodworksurfaces; unless a wire manager is specifiedthen the rim would only be where the wire manageris not located

• Refer to page 340 for grommet locations; andpage 681 for grommet upcharge

• If specifying wood, you must specify the same finishfor all options

TO ORDER, SPECIFY:1. Model Number2. Worksurface Type3. Rim Profile4. PVC Rim Color

(laminate models)5. Grommet6. Wire Manager7. Laminate Top Color/

Veneer Top Finish8. Veneer Rim Finish

(laminate/wood models)

SAMPLE MODEL NUMBERS:WWN3672WSCEDLW2WWN3672WSCEDLL2WWN3672WSCEDLLW2

EEE

FV440F

XXX

D1B403D1L440D1R440

MH440MH MH

• See pages 680-681 for all options available in Bases and Support


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

EXTENDED CORNERWORKSURFACE

3513⁄16"L

B

R

24"

24"

Left shown

19⁄16" TOP THICKNESSLEFT RIGHT

WWN3672WSCEDLW2 WWN3672WSCEDRW2 Wood $ 1789 3513⁄16 72 19⁄16 — — 79 lbs. 3.9

WWN3672WSCEDLLW2 WWN3672WSCEDRLW2 Laminate/Wood 1789 3513⁄16 72 19⁄16 — — 79 lbs. 3.9

WWN3672WSCEDLL2 WWN3672WSCEDRL2 Laminate 1519 3513⁄16 72 19⁄16 — — 79 lbs. 3.9







• Wire Manager available on left side, back or right side; see page 339 for wire manager colors and upcharge• When ordering a wire manager, a wire manager filler can be ordered separately; see page 532• For additional worksurface support, specify Undersurface Support Rail, see page 528• Modified width and depth not available on this shape• Intended for use with 24" deep worksurfaces• For undersurface wire managers, see page 741• SIN 33721

BASE

SAN

DSU

PPOR

T“L”C

ONFIGU

RATI

ONWOR

KSUR

FACE

S

“L“ CONFIGURATION WAVEWORKS WORKSURFACES








(laminate models)5. Grommet6. Wire Manager7. Laminate Top Color/

Veneer Top Finish8. Veneer Rim Finish

(laminate/wood models)

SAMPLE MODEL NUMBERS:WW3672WSCEDLW2WW3672WSCEDLL2WW3672WSCEDLLW2

EEE

FV440F

XXX

D1B403D1L440D1R440

MH440MH MH



DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

EXTENDED CORNERWORKSURFACE(CONTINUED)

3513⁄16"L

B

R

24"

24"

Left shown

13⁄16" TOP THICKNESSLEFT RIGHT

WW3672WSCEDLW2 WW3672WSCEDRW2 Wood $ 1622 3513⁄16 72 13⁄16 — — 79 lbs. 3.9

WW3672WSCEDLLW2 WW3672WSCEDRLW2 Laminate/Wood 1622 3513⁄16 72 13⁄16 — — 79 lbs. 3.9

WW3672WSCEDLL2 WW3672WSCEDRL2 Laminate 1352 3513⁄16 72 13⁄16 — — 79 lbs. 3.9

WW3672WSCEDLLL2 WW3672WSCEDRLL2 TFL 1082 3513⁄16 72 11⁄8 — — 79 lbs. 3.9










BASESAND


WORKSURFACES





• Rim on all 4 sides of (wood or laminate) softenedrim worksurfaces; unless a wire manager isspecified then the rim would only be where the wiremanager is not located

• Knife rim profile (wood or laminate) available onuser side (indicated by K1) or user and approachside (indicated by K2)



(laminate models)5. Grommet6. Wire Manager7. Veneer Top Finish/Laminate Top Color

SAMPLE MODEL NUMBER:25N3672WSCERW2 E V G1A X MC• See pages 682-683 for all options available in Bases and Support


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

EXTENDED CORNERWORKSURFACE

3515⁄16"L

B

R

24"

24"

Left shown

SOFTENED RIMLEFT RIGHT

25N3672WSCELW2 25N3672WSCERW2 Wood $ 1687 3515⁄16 72 13⁄16 — — 72 lbs. 3.9

25N3672WSCELL2 25N3672WSCERL2 Laminate 1406 3515⁄16 72 13⁄16 — — 72 lbs. 3.9





KNIFE RIMLEFT RIGHT

25N3672WSCELW2K1 25N3672WSCERW2K1 Wood $ 2194 361⁄16 7115⁄16 13⁄16 — — 79 lbs. 3.9

25N3672WSCELL2K1 25N3672WSCERL2K1 Laminate 2183 361⁄16 7115⁄16 13⁄16 — — 79 lbs. 3.9

25N3666WSCELW2K1 25N3666WSCERW2K1 Wood $ 2118 361⁄16 66 13⁄16 — — 72 lbs. 3.6

25N3666WSCELL2K1 25N3666WSCERL2K1 Laminate 2071 361⁄16 66 13⁄16 — — 72 lbs. 3.6




BASE

SAN

DSU

PPOR

T“L”C

ONFIGU

RATI

ONWOR

KSUR

FACE

S

“L“ CONFIGURATION EPIC WORKSURFACES




• Rim on all 4 sides of (wood or laminate) softenedrim worksurfaces; unless a wire manager isspecified then the rim would only be where the wiremanager is not located

• Knife rim profile (wood or laminate) available onuser side (indicated by K1) or user and approachside (indicated by K2)



(laminate models)5. Grommet6. Wire Manager7. Veneer Top Finish/

Laminate Top Color

SAMPLE MODEL NUMBER:25N3872WSCELW2K2 E V G1A X MC• See pages 682-683 for all options available in Bases and Support


DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

EXTENDED CORNERWORKSURFACE(CONTINUED)

3515⁄16"L

B

R

24"

24"

Left shown

KNIFE RIM (CONTINUED)LEFT RIGHT

25N3872WSCELW2K2 25N3872WSCERW2K2 Wood $ 2194 371⁄2 7115⁄16 13⁄16 — — 79 lbs. 3.9

25N3872WSCELL2K2 25N3872WSCERL2K2 Laminate 2183 371⁄2 7115⁄16 13⁄16 — — 79 lbs. 3.9






BASESAND


WORKSURFACES








TO ORDER, SPECIFY:1. Model Number2. Worksurface Type3. Worksurface Type4. Rim Profile5. PVC Rim Color

(laminate models)6. Grommet7. Wire Manager8. Modified Depth9. Modified Width

10. Laminate Top Color/Veneer Top Finish

11. Veneer Rim Finish(laminate/wood models)

SAMPLE MODEL NUMBERS:WWN2436WSSVDWWWN2436WSSVDLWWN2436WSSVDLW

MMM

FV440F

XXX

D1BL403D1L440D1B440

XXX

551⁄2

55X

MH440MH MH



DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

RECTANGULAR WORKSURFACE24" DEPTH

L

B

R

Direction of arrow designateswoodgrain direction

19⁄16" TOP THICKNESS

WWN2436WSSVDW Wood $ 946 24 361⁄16 19⁄16 — — 63 lbs. 1.8

WWN2436WSSVDLW Laminate/Wood 946 24 361⁄16 19⁄16 — — 63 lbs. 1.8

WWN2436WSSVDL Laminate 477 24 361⁄16 19⁄16 — — 63 lbs. 1.8

WWN2430WSSVDW Wood $ 928 24 301⁄16 19⁄16 — — 61 lbs. 1.5

WWN2430WSSVDLW Laminate/Wood 928 24 301⁄16 19⁄16 — — 61 lbs. 1.5

WWN2430WSSVDL Laminate 445 24 301⁄16 19⁄16 — — 61 lbs. 1.5

• Grain direction runs front-to-back• Intended to be used when building an L configuration utilizing component worksurfaces• SIN 33721

13⁄16" TOP THICKNESS

WW2436WSSVDW Wood $ 780 24 361⁄16 13⁄16 — — 63 lbs. 1.8

WW2436WSSVDLW Laminate/Wood 780 24 361⁄16 13⁄16 — — 63 lbs. 1.8

WW2436WSSVDL Laminate 315 24 361⁄16 13⁄16 — — 63 lbs. 1.8

WW2436WSSVDLL TFL 251 24 361⁄16 11⁄8 — — 63 lbs. 1.8

WW2430WSSVDW Wood $ 758 24 301⁄16 13⁄16 — — 61 lbs. 1.5

WW2430WSSVDLW Laminate/Wood 758 24 301⁄16 13⁄16 — — 61 lbs. 1.5

WW2430WSSVDL Laminate 283 24 301⁄16 13⁄16 — — 61 lbs. 1.5

WW2430WSSVDLL TFL 225 24 301⁄16 11⁄8 — — 61 lbs. 1.5

• Grain direction runs front-to-back• Intended to be used when building an L configuration utilizing component worksurfaces• For undersurface wire managers, see page 741• SIN 33721

BASE

SAN

DSU

PPOR

T“L”C

ONFIGU

RATI

ONWOR

KSUR

FACE

S








TO ORDER, SPECIFY:1. Model Number2. Worksurface Type3. Worksurface Type4. Rim Profile5. PVC Rim Color

(laminate models)6. Grommet7. Wire Manager8. Modified Depth9. Modified Width

10. Laminate Top Color/Veneer Top Finish

11. Veneer Rim Finish(laminate/wood models)

SAMPLE MODEL NUMBERS:25N2436WSSVW25N2436WSSVL

MM

FV440

XX

D1BL403D1L440

XX

551⁄2

55MH440



DIMENSIONSA KW

CARTONEDWEIGHT

CUBICFEETD W H

RECTANGULAR WORKSURFACE24" DEPTH

L

B

R

Grain direction runs front-to-back

SOFTENED RIM

25N2436WSSVW Wood $ 812 24 361⁄16 13⁄16 — — 33 lbs. 1.8

25N2436WSSVL Laminate 328 24 361⁄16 13⁄16 — — 33 lbs. 1.8

25N2430WSSVW Wood $ 789 24 301⁄16 13⁄16 — — 28 lbs. 1.5

25N2430WSSVL Laminate 293 24 301⁄16 13⁄16 — — 28 lbs. 1.5

KNIFE RIM

25N2636WSSVWK1 Wood $ 1056 251⁄2 361⁄16 13⁄16 — — 33 lbs. 1.8

25N2636WSSVLK1 Laminate 508 251⁄2 361⁄16 13⁄16 — — 33 lbs. 1.8

25N2630WSSVWK1 Wood $ 1025 251⁄2 301⁄16 13⁄16 — — 28 lbs. 1.5

25N2630WSSVLK1 Laminate 453 251⁄2 301⁄16 13⁄16 — — 28 lbs. 1.5

• Grain direction runs front-to-back• Intended to be used when building an L configuration utilizing components• For undersurface wire managers, see page 741• SIN 33721

BASESAND


WORKSURFACES



BASE

SAN

DSU

PPOR

T“L”C

ONFIGU

RATI

ONWOR

KSUR

FACE

S



BASES AND SUPPORT - National Office Furniture

Documents

Transcript of BASES AND SUPPORT - National Office Furniture