Estimation of peakpower near the vicinity of base station antennas
Base Station Antennas
description
Transcript of Base Station Antennas
RFI Short Form Catalogue
Base Antennas
2
Local Support
NSW99 Station RoadSeven Hills NSW 2147Phone: (02) 8814 2300Fax: (02) 9630 0844
VIC46 Corporate BoulevardBayswater VIC 3153Phone: (03) 9751 7500Fax: (03) 9751 7588
WA4/45 Tomlinson RoadWelshpool WA 6106Phone: (08) 9331 0600Fax: (08) 9311 0688
QLD and International Sales30 Raubers RoadBanyo QLD 4014Phone: (07) 3621 9400Fax: (07) 3252 5505
International Support
RFI EMEA (UK)Bicester Innovation CentreCommerce HouseTelford RoadBicester OX26 4LDUnited KingdomPhone: +44 (0) 1869 255 772
RFI Americas9329 Ravenna RoadSuite CTwinsburg OH 44087 USAPhone: +1 330 486 0706Fax: +1 330 486 0705
RFI New ZealandPO Box 38-626Howick Auckland NZPhone: +64 9 537 2683Fax: +64 9 537 2684
RFI have been supporting Australian and international customers with unique base station antenna designs for over 30 years. The comprehensive range caters to frequencies from 27MHz to 5800MHz and includes dipole arrays, collinears, yagis, side mount dipoles, corner reflectors and phasing harnesses. The latest patented MeanderTM line collinear and corporate collinear designs rewrite the rules on bandwidth and performance.
We strive to provide a service that is of world standard yet retain the agility of a small player. Our motivated team of engineering and manufacturing professionals pride themselves on their design philosophy of “bettering the best”. Our experience pays off when new technologies require an antenna solution that matches the latest in sophisticated design.
RFI utilises:
• The latest in antenna design software
• Specialised test equipment
• An enormous depth of experience providing solutions to carriers, manufacturers and end users
• A flexible manufacturing environment for base and mobile antennas
And we can supply everything else you need to complete your system. Antenna combining equipment, repeaters, coaxial cables, connectors, lightning protection, solar power, DC power supplies, hand portable antennas, installation accessories…and more!
This catalogue is intended as our abbreviated guide to RFI’s range of base station antennas. Our most up to date information is always on our website and we encourage you to utilise it when needed or alternatively contact one of our sales specialists for any further information you may require.
RFI
3
Contents
Ground Plane Antennas page 4 Coaxial Dipole Antennas page 6 Side Mounted Dipole Antennas page 8
Dipole Array Antennas page 10
Screened Dipole Antennas page 14 Collinear Antennas page 16
- Meander Design page 17 - Manufactured to Frequency Designs page 19 - Corporate Design page 20
Yagi Antennas page 22
Wireless Broadband Antennas page 26
4
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Ground Plane Antennas
The GP series is a range of omnidirectional unity gain adjustable ground plane antennas ideal for
local area coverage when a high gain antenna is not required or justified. The broad vertical
beamwidth offers excellent null fill for consistent signal coverage. GP series antennas are easily
tuned in the field by adjusting the positions of the ground plane elements.
5
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Ground Plane Antennas70-175 MHz
Special Features
• Simplefieldtuningbyadjustingthepositionoftheradials
• Lightweightandeasytomount• Broadverticalbeamwidthforexcellentnullfill
• Compact-shippeddisassembledforeaseofhandling
• Flexiblefinishesalodined(STD)blackpowdercoatedorstainlesssteelconstruction
Frequency MHz Gain dBi (dBd) Tuned Bandwidth MHz Model
70-85 2 (0) 5 GP1
118-136 2 (0) 10 GP3
137-151 2 (0) 10 GP4
148-175 2 (0) 15 GP2
Operating Bandwidth
75 76 77 78 79 80 81 82 83 84 85
( )
GP1 E Plane
GP1 Typical Response VSWR
6
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Coaxial Dipole Antennas
Our range of vertical enclosed dipoles are unity gain VHF and UHF antennas
ordered to specific frequencies for either simplex or duplex operation. These
antennas provide low wind and tower loading with excellent omnidirectionality
and null fill characteristics.
7
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Coaxial Dipole Antennas30-960 MHz
Special Features
• Lowwindandtowerloading• DCgroundedforlightningprotectionandthe
reductionofprecipitationstaticnoise• Unitygainomnidirectionalradiationpatternwith
excellentnull-fillcharacteristics
• Modelsavailableinruggedisedconstructionwithheavydutyblackfibreglassradome-aidinginiceshedding
• Modelsavailablewithstainlesssteelmountingsectionforcorrosiveenvironments
Frequency MHz Gain dBi (dBd)
Bandwidth Lengthm
Special Features Model
30-50 2 (0) 1% 5.5 COD30
66-140 2 (0) 2% 3.4 COD1
66-141 2 (0) 5% 3.0 COD12
66-142 2 (0) 5% 2.7 COD14
140-205 2 (0) 5 MHz 1.7 COD2
140-175 2 (0) 5 MHz 1.8 Ruggedised black radome for ice shedding COD22
140-205 2 (0) 5 MHz 1.7Stainless steel mounting tube for corrosive
environmentsCOD24
400-420 2 (0) Full band 1 COD4-65
450-470 2 (0) Full band 0.9 COD4-70
470-490 2 (0) Full band 0.9 COD4-71
480-500 2 (0) Full band 0.9 COD4-63
500-520 2 (0) Full band 0.9 COD4-72
375-520 2 (0) 4% Variable Custom manufactured to 4% of bandwidth COD4-99
820-880 2 (0) Full band 0.8 COD8-81
850-930 2 (0) Full band 0.8 COD8-82
600-960 2 (0) 80 MHz Variable Custom manufactured to 4% of bandwidth COD8-99
( )155 156 157 158 159 160 161 162 163 164 165
Operating Bandwidth
COD2 E Plane COD2 Typical VSWR Response
CO
D4
CO
D22
CO
D1
8
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Side Mounted Dipole Antennas
The SMD series of side mount dipoles are a range of broadband unity gain
dipoles which can be used as a single antenna for short range applications
or, if desired, phased together to provide high gain array coverage
characteristics.
9
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Side Mounted Dipole Antennas70-960 MHz
Special Features
• Canbephasedtoprovide3dBdor6dBdgaininavarietyofpatternstailoredtosuitspecificrequirements
• Highstrengthruggedisedandstainlesssteelversionsavailable
• Fullbandwidthcoverageforbothsingleantennasandphasedarrays-idealincommunitysites
• Modelsavailablewith7/16DINorN-typeconnectors
• LowPIMratingofsidemountdipolesfeature<-150dBcspecification
• Superiorlightningprotectioncharacteristics• Anextensiverangeofphasingharnessesavailable
Standard Range of Side Mounted DipolesFrequency MHz Gain dBi (dBd) Bandwidth Description Model
70-85 2 (Unity) Full band Heavy duty aluminium SMD1
70-85 2 (Unity) Full band Heavy duty black powder coated aluminium for ice shedding SMD12
70-85 2 (Unity) Full band Stainless steel SMD14
66-108 2 (Unity) 10% Heavy duty aluminium SMD1-99
148-175 2 (Unity) Full band Heavy duty aluminium SMD2
148-175 2 (Unity) Full band Heavy duty black powder coated aluminium for ice shedding SMD22
148-175 2 (Unity) Full band Stainless steel SMD24
108-200 2 (Unity) 10% Heavy duty aluminium SMD2-99
746-870 2 (Unity) Full band Welded alodined aluminium SMD7-90
806-960 2 (Unity) Full band Welded alodined aluminium SMD8-90
Low PIM Range of Side Mounted Dipoles70-85 2 (Unity) Full band Welded alodined aluminium SMD10-28
130-150 2 (Unity) Full band Welded alodined aluminium SMD20-36
148-174 2 (Unity) Full band Welded alodined aluminium SMD20-41-DIN
400-520 2 (Unity) Full band Welded alodined aluminium SMD4-67
400-520 2 (Unity) Full band Stainless steel SMD41-67
360-600 2 (Unity) 20% Welded alodined aluminium SMD4-99
360-600 2 (Unity) 20% Stainless steel SMD41-99
( )140 144 148 152 156 160 164 168 172 176 180
Operating Bandwidth
SMD20-41 H Plane SMD20-41 Typical VSWR Response
H Plane at ¼ wave antenna to mast spacing
10
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Dipole Array Antennas
Ever increasing costs and site density requirements are reducing the availability of
antenna positions on prime sites. In order to reduce the overall number of antennas the RFI dipole array series provide systems engineers
and site owners with a flexible solution to reduce antenna numbers.
BA8080-67AntennasonEmpireStateBuilding-NewYorkCity
11
For complete, up to date product specifications on individual items please visit www.rfi.com.au
BA8080-67AntennasonEmpireStateBuilding-NewYorkCity
Dipole Array Antennas136-520 MHz
Special Features
• Allweldedconstruction• Internallyroutedhermeticallysealedsilverplated
PTFEphasingharness• Operatesovertheentirebandwithnoneedfor
tuningoradjustment
• 100%anechoicchambertestedandcertifiedtoindustryleadinglowPIM(-150dBc)design
• Highpowerhandlingupto750W(VHF)500W(UHF)
• Fixedelectricaldowntilitavailableonrequest• VSWRof<1.5:1acrossentireband• Superiorlightningprotectioncharacteristics• Availablewith7/16DINorN-typeconnectors• Flexiblefinishesalodined(STD)blackpowder
coatedorstainlesssteelconstruction
BA Omnidirectional Pattern
EA Elliptical Pattern OA Offset Pattern
FrequencyMHz
Gain dBi
(dBd)
Dipoles Lengthm
Model
136-174 5 (3) 4 3.5 BA40-41
136-174 8 (6) 8 6.3 BA80-41
330-420 5 (3) 4 2.1 BA40-57
330-420 8 (6) 8 3.0 BA80-57
400-520 5 (3) 4 2.1 BA40-67
400-520 8 (6) 8 3.0 BA80-67
400-520 11 (9) 16 5.0BA160-67-T3
BA (Omnidirectional) modelsFrequency
MHzGain dBi
(dBd)
Dipoles Lengthm
Model
136-174 7 (5) 4 3.5 EA40-41
136-174 10 (8) 8 6.3 EA80-41
330-420 7 (5) 4 2.1 EA40-57
330-420 11 (9) 8 3.0 EA80-57
400-520 7 (5) 4 2.1 EA40-67
400-520 11 (9) 8 3.0 EA80-67
EA (Elliptical) modelsFrequency
MHzGain dBi
(dBd)
Dipoles Lengthm
Model
136-174 7 (5) 2 3.5 OA20-41
136-174 11 (9) 4 6.3 OA40-41
330-420 7 (5) 2 2.1 OA20-57
330-420 11 (9) 4 3.0 OA40-57
400-520 7 (5) 2 2.1 OA20-67
400-520 11 (9) 4 3.0 OA40-67
OA (Offset) models
12
For complete, up to date product specifications on individual items please visit www.rfi.com.au
330-520 MHz
Single Section Multiple ArraysAcombinationofanytwodipolearrays,eitheromnidirectionalBAmodels,ellipticalEAmodelsoroffsetOAmodelsmountedtoacommonboomtoeffectivelyprovidetwoseparateantennasontheonemast.Theonephysicalstructureisinfacttwoindividualantennaswithseparatefeedsforeachantenna.
Combination Arrays
Frequency MHz Length m Description Model
Omnidirectional Models
330-420 3 2 x 3dBd omni with separate feeds BA4040-57
400-520 3 2 x 3dBd omni with separate feeds BA4040-67
Elliptical Models
330-420 3 2 x 5dBd elliptical with separate feeds EA4040-57
400-520 3 2 x 5dBd elliptical with separate feeds EA4040-67
Offset Models
400-520 3 2 x 5dBd offset with separate feeds OA2020-67
Dual Section Combination ArraysThesearraysaresuppliedintwosectionsforeaseofshipping.Thelowersectionismadeonalargerdiametermaststockwiththeupperarraytelescopingintothelowersection.BothupperandlowersectionscanbeanyoneofourstandardUHF(only)arraysorcanbecoupledwithaphasingharnessforevenhighergain.Eachlowersectionissuppliedwithathroughharnesstoconnecttotheuppersection.TheimagebelowshowsaBA80-67LlowersectionandaBA80-67uppersection.
Frequency MHz Lower section length m
Description Model
Omnidirectional Models - Lower section
330-420 3 2 x 3dBd omni with separate feeds BA4040-57L
330.420 3 1 x 6dBd omni BA80-57L
400-520 3 2 x 3dBd omni with separate feeds BA4040-67L
400-520 3 1 x 6dBd omni BA80-67L
Elliptical Models - Lower section
330-420 3 2 x 5dBd elliptical with separate feeds
EA4040-57L
330-420 3 1 x 8dBd elliptical EA80-57L
400-520 3 2 x 5dBd elliptical with separate feeds
EA4040-67L
400-520 3 1 x 8dBd elliptical EA80-67L
Offset Models - Lower section
400-520 3 2 x 5dBd offset with separate feeds OA2020-67L
400-520 3 1 x 9dBd offset OA40-67L
When ordering a dual section combination array you will need to order as follows:1. Specify your lower section from the list above eg. BA80-67L PLUS2. Specify a single upper section array from our selection of standard dipole array antennas listed on the previous page eg. OA40-67
13
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Combination Collinear & Dipole ArraysSimilartothedualsectionarray,thistypeofcombinationarrayutilisesacollinearantennaastheuppersectionofthearrayideallysuitedtoapplicationswheretowerloadingisaconsideration.ThecollinearfitsintothelowersectionwhichcanessentiallybeanystyleofourhighergainUHF(only)dipolearrays.EachlowersectionissuppliedwithathroughharnesstoconnecttoyourchoiceofCOL8(UHF),COL45(UHF),COL15(VHF)orCOL17(VHF)collinears.TheimagebelowshowsaBX80-67lowersectionwithaCOL8uppersection.
Frequency MHz Lower section length m
Description Model
Omnidirectional Models - Lower section
400-520 2 1 x 3dBd omni BX40-67
400-520 3 2 x 3dBd omni with separate feeds BX4040-67
400-520 3 1 x 6dBd omni BX80-67
Elliptical Models - Lower section
400-520 2 1 x 5dBd elliptical EX40-67
400-520 3 2 x 5dBd elliptical with separate feeds EX4040-67
400-520 3 1 x 8dBd elliptical EX80-67
Offset Models - Lower section
400-520 3 2 x 5dBd offset with separate feeds OX2020-67
400-520 3 1 x 9dBd offset OX40-67
When ordering a combination collinear and dipole array you will need to order as follows:1. Specify your lower section from the list above eg. BX80-67 PLUS2. Specify your COL Collinear either COL15, COL17, COL8 (and remember to specify frequency)
14
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Screened Dipole Antennas
These screened dipole antennas deliver high gain and excellent front to back ratios for
critical path or high interference applications. Constructed with a grid style back screen to
maximise pattern control, these all welded screens are of alodined finish for corrosion protection and utilise stainless steel fittings.
15
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Screened Dipole Antennas136-960 MHz
Special Features
• Highfronttobackratiotoallowfrequencyre-usebytailoringcoverageareas
• Shippedunassembledforeaseofhandling.Easilyassembledonsite
• DirectDCgroundedforlightningprotectionandreductionofprecipitationstaticnoise
• Highpowerhandlingupto750W(VHF),500W(UHF)
• Operatesovertheentirebandwithnoneedfortuningoradjustment
• Internallyrouted,hermeticallysealed,silverplatedPTFEcablesharness
• VSWRof<1.5:1acrossentireband
FSA-20-67 E Plane
FSA-20-67 H Plane
CSA-20-67-DIN E Plane
CSA-20-67-DIN H Plane
Frequency MHz Bandwidth Gain dBi (dBd) Length m HBWo VBWo Model
136-174 26 MHz 9 (7) 1.3 x 1.3 x 1.2 62 69 CR2
148-174 Full band 9 (7) 1 x 1 106 70 FSA10-41-DIN
148-174 Full band 11 (9) 3.5 x 1 108 34 FSA20-41-DIN
406-512 Full band 7 (5) 0.5 x 0.6 121 71 FSA10-67-DIN
406-512 Full band 8 (6) 2.1 x 0.6 132 35 FSA20-67-DIN
406-512 Full band 11 (9) 3 x 0.8 135 17 FSA40-67-DIN
400-520 Full band 11 (9) 3.0 167 17 CRA40-67
406-512 Full band 9 (7) 0.5 x 0.8 64 69 CSA10-67-DIN
406-512 Full band 11 (9) 2.1 x 0.8 71 35 CSA20-67-DIN
406-512 Full band 13 (11) 3 x 0.8 60 17 CSA40-67-DIN
330-420 Full band 10 (8) 0.9 x 0.9 x 0.6 40 57 CR4-57
400-520 Full band 11 (9) 0.9 x 0.9 x 0.6 40 57 CR4-67
800-960 60 MHz 11 (9) 0.4 x 0.4 x 0.4 45 52 CR8
16
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Collinear Antennas
Our extensive range of collinear antennas is available in frequency specific designs
suitable for both simplex and duplex applications and in addition feature our
innovative broadband low PIM patented corporate feed antennas and PCB
based Meander™ technology.
17
For complete, up to date product specifications on individual items please visit www.rfi.com.au
COL45 E Plane COL45 Typical VSWR Response( )
460 464 468 472 476 480 484 488 492 496 500
Operating Bandwidth
Frequency MHz Gain dBi (dBd) Bandwidth Length m Model
130-140 2 (0) Full band 2.2 COL51-140
140-150 2 (0) Full band 2.1 COL51-150
150-160 2 (0) Full band 2.2 COL51-160
156-166 2 (0) Full band 2.2 COL51-166
162-174 2 (0) Full band 2.1 COL51-174
130-140 6 (4) Full band 5.5 COL53-140
140-150 6 (4) Full band 5.0 COL53-150
150-160 6 (4) Full band 5.1 COL53-160
150-160 7 (5) Full band 6.5 COL54-160
156-166 7 (5) Full band 6.5 COL54-166
162-174 7 (5) Full band 6.0 COL54-174
380-400 2 (0) Full band 1.1 COL41-58
400-420 2 (0) Full band 1.1 COL41-65
450-470 2 (0) Full band 1.1 COL41-70
470-490 2 (0) Full band 1.1 COL41-71
490-520 2 (0) Full band 1.1 COL41-72
380-400 6.2 (4) Full band 2.2 COL43-58
400-420 6.2 (4) Full band 2.0 COL43-65
450-470 6.2 (4) Full band 1.9 COL43-70
470-490 6.2 (4) Full band 1.8 COL43-71
450-470 6.2 (4) Full band 1.7 COL43-72
380-400 8 (6) Full band 3.4 COL45-58
400-420 8 (6) Full band 3.1 COL45-65
450-470 8 (6) Full band 2.8 COL45-70
470-490 8 (6) Full band 2.7 COL45-71
490-520 8 (6) Full band 2.6 COL45-72
• UniquepatentedPCBcircuitforexcellentbroadbandcharacteristics
• Exceptionalpatternstabilityacrosstheentireband
• IndustryleadinglowPIMcharacteristics-150dBc
• Lightweight-idealwhentowerloadingisaconcern
• Suppliedpre-tunedinavastrangeofbands• DCgroundedforlightningprotectionandthe
reductionofprecipitationstaticnoise
Special Features
130-2170 MHzLow PIM Meander™ DesignCollinear Antennas
CO
L54
CO
L45
CO
L85
18
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Low PIM Meander™ Design continued
Frequency MHz Gain dBi (dBd) Bandwidth Length m Model
380-400 10 (8) Full band 6.2 COL410-58
400-420 10 (8) Full band 5.9 COL410-65
450-470 10 (8) Full band 5.4 COL410-70
470-490 10 (8) Full band 5.2 COL410-71
490-520 10 (8) Full band 4.9 COL410-72
746-806 2 (0) Full band 1.1 COL81-806
806-870 2 (0) Full band 1.1 COL81-870
850-930 2 (0) Full band 1.1 COL81-930
746-806 7 (5) Full band 1.7 COL84-806
806-870 6 (4) Full band 1.6 COL84-870
850-930 7 (5) Full band 1.6 COL84-930
746-806 9 (7) Full band 2.0 COL85-806
806-870 9 (7) Full band 1.9 COL85-870
850-930 9 (7) Full band 1.8 COL85-930
746-806 11 (9) Full band 3.6 COL811-806
806-870 10 (8) Full band 3.4 COL811-870
850-930 10 (8) Full band 3.2 COL811-930
824-2170 5 (3) @ 890MHz; 3 (1) @2100MHz Multiband 0.7 COL2194
824-2170 6 (4) @ 890MHz; 3 (1) @2100MHz Multiband 1.0 COL2195
824-2170 7 (5) @ 890MHz; 3 (1) @2100MHz Multiband 1.7 COL2199
19
For complete, up to date product specifications on individual items please visit www.rfi.com.au
• LowwindandtowerloadingDCgroundedforlightningprotectionandthereductionofprecipitationstaticnoise
• Modelsavailableinheavydutyconstructionwithheavydutyblackradome-aidinginiceshedding
• Modelsavailablewithstainlesssteelmountingsectionsforcorrosiveenvironments
• Frequencyspecificmodelsavailableforbothsimplexandduplexapplications
Manufactured to Frequency Designs
COL23 E Plane COL23 Typical VSWR Response
( )340 342 344 346 348 350 352 354 356 358 360
Operating Bandwidth
Frequency MHz
Gain dBi (dBd)
Bandwidth Lengthm
Description Model
70-88 5 (3) 3.0% 5.9 Duplex operation - Ruggedised black radome for ice shedding COL1
67-88 5 (3) 3.0% 5.8 Duplex operation COL16
88-115 5 (3) 1.0% 4.8 Simplex operation (narrowband) COL22
115-148 5 (3) 4.0% 3.8 Dulpex operation COL28
115-148 5 (3) 4.0% 3.8 Duplex operation - Ruggedised black radome for ice shedding COL29
144-175 5 (3) 4.0% 3.0 Duplex operation COL17
144-175 5 (3) 4.0% 3.0 Duplex operation - Ruggedised black radome for ice shedding COL3
148-175 5 (3) 4.0% 2.9Duplex operation - Ultra heavy duty black radome for ice shedding &
galvanised mounting tubeCOL35
144-175 7 (5) 4.0% 4.4 Duplex operation COL4
144-175 7 (5) 4.0% 4.4Duplex operation - Stainless steel mounting tube for corrosive environ-
mentsCOL24
144-175 7 (5) 4.0% 4.7 Duplex operation - Ruggedised black radome for ice shedding COL18
148-175 7 (5) 4.0% 4.6Duplex operation - Ultra heavy duty black radome for ice shedding &
galvanised mounting tubeCOL36
175-310 5 (3) 5.0% 2.7 Duplex operation COL27
300-390 8 (6) 4.0% 3.7 Duplex operation COL23
300-390 8 (6) 4.0% 3.7 COL23 supplied with 1m RG213 Cable Tail with N (female) connector COL23-T1
380-530 5 (3) 4.0% 2.2 Duplex operation COL7
390-520 5 (3) 4.0% 2.2 Duplex operation - Ruggedised black radome for ice shedding COL11
380-530 8 (6) 10MHz 3.1 Duplex operation COL8
380-530 8 (6) 10MHz 3.0 Duplex operation - Ruggedised black radome for ice shedding COL12
380-530 8 (6) 10MHz 3.0Duplex operation - Ultra heavy duty black radome for ice shedding &
galvanised mounting tubeCOL19
600-1000 5 (3)5% @ <800MHz9% @ >800MHz
1.5 Duplex operation - Stainless steel mounting tube COL903
600-1000 8 (6)5% @ <800MHz9% @ >800MHz
2.2 Duplex operation - Stainless steel mounting tube COL906
CO
L8
Special Features
67-1000 MHz
CO
L23
20
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Special Features
• Exceptionalpatternstabilityacrosstheentireband
• IndustryleadinglowPIMcharacteristics-150dBc• DCgroundedforlightningprotectionandthe
reductionofprecipitationstaticnoise• Lightweightdipoleconstructionandlowcentreof
gravityminimisedtipdeflectionandsway
• Suppliedpre-tunedinavastrangeofbands• Lowwindandtowerloading-idealalternativeto
exposeddipolearrays• Modelsavailableasdualantennaswithseparate
feedsinonehousing
380-870 MHzLow PIM Corporate Collinear Design
CC807-06 E Plane CC807-06 Typical VSWR Response( )
730 745 760 775 790 805 820 835 850 865 880
Operating Bandwidth
Frequency MHz Gain dBi (dBd) Bandwidth Length m Model
380-420 7 (5) Full band 3.1 CC380-06
380-420 Dual Band 4.6 (2.5) Full band 3.8 CC380-33
450-520 7 (5) Full band 2.7 CC450-06
746-870 5 (3) Full band 1.3 CC807-03
746-870 8 (6) Full band 1.8 CC807-06*
746-870 10 (8) Full band 2.9 CC807-08*
746-870 13 (11) Full band 5.3 CC807-11*
*Available in tilt variations of 1, 3 & 5 degrees by adding, -T1, -T5. Can be mounted upright or invert.
22
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Yagi Antennas
The RFI range of yagi antennas feature standard aluminium, ruggedised aluminium or stainless
steel construction to meet the needs of the most demanding applications. Ideal for point to point, short or long link applications, RFI yagi antennas
feature all welded construction for years of reliable service in a variety of environmental conditions.
23
For complete, up to date product specifications on individual items please visit www.rfi.com.au
VHF Yagi AntennasFrequency
MHzGain dBi
(dBd)Bandwidth Vertical
BWHorizontal BW F/B Ratio
dBDescription Model
70-100 5 (3) 6MHz 70 140 10 2 element Yagi with stainless steel fittings YL02
70-100 6 (4) 3MHz 60 105 up to 20~ 2 element Yagi with stainless steel fittings YL02D
70-100 8 (6) 5MHz 60 75 15 3 element Yagi with stainless steel fittings YL03
70-100 9 (7) 4MHz 55 60 16 4 element Yagi with stainless steel fittings YL04
100-250 5 (3) 12MHz 80 140 11 2 element Yagi with stainless steel fittings YH02
100-250 6 (4) 6MHz 70 130 up to 20~ 2 element Yagi with stainless steel fittings YH02D
100-250 8 (6) 9MHz 60 75 15 (typ.) 3 element Yagi with stainless steel fittings YH03
100-250 9 (7) 8MHz 55 70 15 (typ.) 4 element Yagi with stainless steel fittings YH04
100-250 11 (9) 8MHz 52 50 15 (typ.) 6 element Yagi with stainless steel fittings YH06
100-250 12 (10) 8MHz 35 50 15 (typ.) 9 element Yagi with stainless steel fittings YH09
• Allweldedconstructionformaximumperformanceandreliability
• Highfronttobackratiotoreduceinterference• Modelsavailableinmarinegradestainlesssteel
forcorrosiveenvironments• Fullyfoldeddipoledrivenelementconstruction
formaximumreliability• Alodinedfinishprovidesanexcellentconductive
surfaceforearthing
• Availableascustomtunedorfullbandoperation• Canbeconfiguredinstacksorbaysforhigher
gainapplicationsusingPHandPHEphasingharnesses
• Anextensiverangeofphasingharnessesavailable
Special Features
70-600 MHz
Yagi Antennas
UHF Yagi Antennas300-600 5 (3) 5% 77 161 9 2 element Yagi - specify operating frequency YB02-99
350-600 8 (6) 5% 63 98 13 3 element Yagi - specify operating frequency YB03-99
400-600 11 (9) Full band 47 56 18 (typ.) 6 element Yagi - refer below for available bands YB6*^
350-600 11 (9) 5% 47 56 18 (typ.) 6 element Yagi - specify operating frequency YB6-99
400-470 11 (9) Full band 45 49-52 16-18 7 element Yagi - refer below for available bands YB7*
400-470 13 (11) Full band 36 39 18 10 element Yagi - refer below for available bands YB10*
400-600 13 (11) Full band 46 54 18 (typ.) 9 element Yagi - refer below for available bands YB9*^
400-600 13 (11) 5% 54 48 19 (typ.) 9 element Yagi - specify operating frequency YB9-99
400-600 14 (12) Full band 34 36 20 (typ.) 16 element Yagi - refer below for available bands YB16*^
400-600 14 (12) 5% 34 36 21 (typ.) 16 element Yagi - specify operating frequency YB16-99
*Specify the following suffix when ordering: -61 (450-480MHz), -62 (480-520MHz), -63 (480-500MHz), -65 (400-420MHz), -70 (450-470MHz), -71 (470-490MHz), -75 (580-600MHz), eg: YB6-62^Available in stainless steel construction for corrosive environments. Specify YBSS as the prefix eg: YBSS6-62~ The front to back ratio is dependant on mounting arrangements. When correctly mounted as per the supplied instructions, 18-20dB front to back ratio is achieved.
YB6-61 E Plane
( )440 445 450 455 460 465 470 475 480 485 490
Operating Bandwidth
YB6-61 Typical VSWR Response
24
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Special Features
• Heavydutyboomandelementsblackpowdercoatedtoaidiniceshedding
• Highfronttobackratiotoreduceinterference• Allweldedconstructionformaximum
performanceandreliability
• CanbeconfiguredinstacksorbaysforhighergainapplicationsusingPHandPHEphasingharnesses.
• Ruggedisedconstructionforuseinextremeconditions
• Availableascustomtunedorfullbandoperation• Anextensiverangeofphasingharnesses
available
300-600 MHzRuggedised UHF Yagi Antennas
Frequency MHz
Gain dBi (dBd)
Bandwidth Vertical BW Horizontal BW F/B Ratio dB
Description Model
300-600 8 (6) 4% 62 90 15 3 element heavy duty Yagi - specify operating frequency
RDA3-99
400-600 11 (9) Full band 45 54 20 6 element heavy duty Yagi - refer below for available bands
RDA6*
330-600 11 (9) 4% 45 54 20 9 element heavy duty Yagi - specify operating frequency
RDA6-99
70-100 13 (11) 4MHz 41 46 18 9 element heavy duty Yagi - refer below for available bands
YL04
100-250 13 (11) 12MHz 41 46 18 9 element heavy duty Yagi - specify operating frequency
YH02
100-250 14 (12) 6MHz 35 36 20 16 element heavy duty Yagi - refer below for available bands
YH02D ^
100-250 14 (12) 9MHz 35 36 20 16 element heavy duty Yagi - specify operating frequency
YH03
*Specify the following suffix when ordering: -61 (450-480MHz), -62 (480-520MHz), -63 (480-500MHz), -65 (400-420MHz), -70 (450-470MHz), -71 (470-490MHz), -75 (580-600MHz), eg: RDA6-62^Available in stainless steel construction for corrosive environments.
( )480 484 488 492 496 500 504 508 512 516 520
Operating Bandwidth
RDA6-99 E Plane
RDA6-99 Typical Response VSWR
25
For complete, up to date product specifications on individual items please visit www.rfi.com.au
• Alodinedfinishprovidesandexcellentconductivesurfaceforearthing
• Allweldedconstructionformaximumperformanceandreliability
• Fullyfoldeddipoledrivenelementconstructionformaximumreliability
• NarrowbeamwidthsandhighF/Bratioeffectiveinreducinginterference
• Modelsavailableinmarinegradestainlesssteelforcorrosiveenvironments
• Anextensiverangeofphasingharnessesavailable
Special Features
806-1000 MHz800MHz Yagi Antennas
Frequency MHz
Gain dBi (dBd)
Bandwidth Vertical BW Horizontal BW F/B Ratio dB
Description Model
850-930 8 (6) Full band 64 100 14 3 element Yagi - refer below for available bands YB803-82^
540-1000 8 (6) 5% 65 103 14 3 element Yagi - specify operating frequency YB803-99^
806-960 11 (9) Full band 49 61 17-22 6 element Yagi - refer below for available bands YB806*^
540-1000 11 (9) 5% 49 61 17 6 element Yagi - specify operating frequency YB806-99^
806-960 12 (10) Full band 41 48 15-18 9 element Yagi - refer below for available bands YB809*^
540-1000 12 (10) 5% 41 48 16 9 element Yagi - specify operating frequency YB809-99^
806-960 14 (12) Full band 30 30 17-20 15 element Yagi - refer below for available bands YB815*^
540-1000 14 (12) 5% 30 30 17 16 element Yagi - specify operating frequency YB815-99^
850-930 19 (17) Full band 14 24 24 Dual 18 element Yagi YBA818-82
*Specify the following suffix when ordering: -81 (806-896MHz), -82 (850-930MHz), -94 (890-960MHz) eg: YB806-82^Available in stainless steel construction for corrosive environments. Specify YBS as the prefix eg: YBS806-82
( )875 885 895 905 915 925 935 945 955 965 975
Operating Bandwidth
YB806-94 E Plane
YB806-94 Typical Response VSWR
26
For complete, up to date product specifications on individual items please visit www.rfi.com.au
Wireless Broadband Antennas
The RFI range of wireless broadband antennas includes both ground plane independent omni-directional and
directional antenna designs. The range includes 2.4GHz, 5.8GHz and a suite of multiband cellular antennas operating from 800-2500MHz that can be used in a variety of systems
such as cellular coverage enhancement for in-building applications, M2M, LAN extensions
27
For complete, up to date product specifications on individual items please visit www.rfi.com.au
( )2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50
G
Operating Bandwidth
COL2408 E Plane COL2408 Typical VSWR Response
Frequency MHz Gain dBi (dBd) Description Model
2400-2500 5 (3) Stud mount with N-female on 300mm tail COL2402
2400-2500 6.6 (4.5) Integrated N-male connector CD2405
2400-2500 8 (6) Stud mount with N-female on 300mm tail COL2406
2400-2500 10 (8) Stud mount with N-female on 300mm tail COL2408
2400-2500 10.6 (8.5) Integrated N-male connector CD2409
2400-2500 12 (10) Stainless steel mounting tube & N-female on 300mm tail COL2410
5725-5820 8 (6) Stud mount with N-female on 300mm tail COL5806
5725-5820 12 (10) Stud mount with N-female on 300mm tail COL5810
Special Features
2400-5850 MHzCollinear AntennasWireless Broadband Antennas
• PatentedMeander™PCBantennadesignfortheultimateinpatternstability
• Groundplaneindependentdesign• Ruggedconstruction-suitableforcorrosive
environments
• Smallunobtrusiveformfactor• UVstablewhitehousing-idealforbothindoor
andoutdoorapplicationsincludingmarine• Modelsavailablewithspringbaseformobile
applications
CD
2405
28
For complete, up to date product specifications on individual items please visit www.rfi.com.au
• Supportsmultiplenetworksintheonehousing• ModelsavailablewithIP65construction-suitable
forindoorandoutdoorapplications• Suitableforuseonmetallicandnon-metallic
surfaces
• Modelsavailablewithhighimpactresistancehousingstopreventvandaldamage
• Discretedesignssuitableformodernofficeenvironments
Special Features
800-2500 MHzMultiband Antennas
Frequency MHz Gain dBi (dBd) Description Model
800-900, 1710-2200, 2400-2500
3.7 (1.6), 4 (2), 5.4 (3.3)
Ceiling mount with N-female DAS-M1
800-960, 1710-2500 4 (2), 5 (3) Ceiling stud mount with N-female DAS-M4
824-960, 1710-2170, 2400-2500
3.9 (1.8), 4 (2), 5.6 (3.5)
Stud mount with SMA-male on 1.25m tail
CSM900
824-960, 1710-2500 9 (7), 12 (10)Panel antenna with pole and wall
mountCPL824-2500-10SMA
Notes
The pulp for this paper is sourced from certified, well managed sustainable forests and is ECF (Elemental Chlorine Free).The mill is ISO 14001 accredited. It has been "Made Carbon Neutral" by CPI Paper
rfi.com.au