Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 1 THERMAL COMFORT.
-
Upload
solomon-bryant -
Category
Documents
-
view
222 -
download
1
Transcript of Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 1 THERMAL COMFORT.
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 2
James Marston FitchAmerican Building: The Environmental Forces that Shape It
“The fundamental thesis of this book is that the ultimate task of architecture is to act in
favor of man: to interpose itself between man and the natural environment in which he finds
himself, in such a way as to remove the gross environmental load from
his shoulders. The central function of architecture is thus to lighten
the very stress of life.”James Marston Fitch (1909–2000) was an architect
and a Preservationist, one of the founders of the Graduate School of Architecture, Planning, and
Preservation at Columbia University in 1964. (wikipedia)
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 3
“Removing the Load” in Context
context is critical: bus shelter versus elementary school versus hospital operating room
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 4
Thermal Comfort
• Why?– Why should we worry about thermal comfort?
• What?– What is thermal comfort?
• How?– How is thermal comfort addressed during
design?
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 5
Why Worry About Thermal Comfort?
• Designers have an ethical responsibility to cause no harm – my personal opinion
• Gripes about thermal comfort are consistently the number one complaint heard by building managers/owners
• Comfort decisions can have substantial energy and resource consumption implications
• Comfort is the basis for a substantial investment (in a climate control system)
• Green design demands (sort of ) thermal comfort
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 6
Two Ways to Look at Thermal Comfort
As a psychological phenomenon
As a physical phenomenon
Both views are valid, both must be tempered by statistics, and both views are important to building design efforts
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 7
What is Thermal Comfort?
“That condition of mind which expresses
satisfaction with the thermal environment
and is assessed
by subjective evaluation.”
ASHRAE Standard 55-2010 Thermal Environmental Conditions for Human Occupancy
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 8
ASHRAE?
Reminder The American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
(www.ashrae.org)
A key developer and promulgator of building design standards and guidelines.
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 9
Condition of Mind?• Thermal comfort is defined as being an opinion
(essentially an individual perception)• This opinion will be influenced by the
environmental conditions surrounding a person and by his/her interpretation/impression of those conditions– Physical conditions are both group and individual
• Room air temperature is typically common to a group• MRT (mean radiant temperature) is often experienced
differentially by those in the same space
– Interpretation is solely individual• Nevertheless, a group consensus might be ascertained
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 10
Condition of Mind?
• A perception (condition of mind) is best assessed by asking people (occupants) how they feel
• A critical note: one can only ask people who exist and occupy the environment of interest—thus, “asking” is a POE (post occupancy evaluation) activity … there is no one to ask about conditions in a space until that space is built and occupied
• Information from existing situations, however, can be collected, collated, and provided as guidance (or precedent) for future designs
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 11
Subjective Evaluation (Asking)
1. The traditional 7-point “status” scale:
cold | cool | slightly cool | neutral | slightly warm | warm | hot
2. An alternative “action” scale:
Would you prefer: to be warmer | no change | to be cooler
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 12
Uses for a “condition of mind” (psychological) approach
• As a post-occupancy evaluation (POE) tool– If people are in the space being evaluated
• Not directly usable as a design tool– There is no occupied space during design
• But ... POE/laboratory studies can provide useful information (trends and patterns) to help develop a design tool– Such as a “comfort chart”
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 13
ASHRAE Thermal Comfort Chart (from Standard 55-2010)
comfortzone(s)
addressing operative temperature, relative humidity, and occupant clothing
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 14
Midstream Thoughts• Thermal comfort is an important design intent (in my
opinion) and can be easily benchmarked via criteria• Thermal delight might be an even better intent here
and there (see Lisa Heschong: Thermal Delight in Architecture)
• Thermal comfort is not typically required by building codes (it is rarely required, in fact) so it will become a design issue mainly via intent/criteria (or through general practice or by accident)
• Thermal comfort as a psychological-statistical concept should be straightforward
• But …. we need to understand the physical basis of comfort to really use it in design (since environmental elements will need to be manipulated)
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 15
Mapping Physical & Psychological Comfort Territories
temperature
hum
idity
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 16
Physical Context of Thermal Comfort
-- dishealth
-- dishealth
conditions the body’s response
see required reading for more details on these responses
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 17
Physical Basis of Thermal Comfort
Fundamentally, comfort involves a heat balance (a thermal equilibrium) … where:
heat in ≈ heat out
where “heat in” is provided by metabolism, radiation, conduction, convection
where “heat out” is via radiation, conduction, convection, evaporation
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 18
Heat FlowMechanisms
three external “to” mechanisms; four “from” mechanisms
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 19
Heat Flow to/from Human Body
Sensible Heat– Flows via conduction, radiation, and convection– Flow rate is generally related to space temperatures
Latent Heat– Flows via evaporation– Flow rate is generally related to space humidity
Total Heat Flow = sensible + latent flows
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 20
Heat Flow to/from Human Body
Conduction (sensible)
Convection (sensible)
Radiation (sensible)
Evaporation/Condensation (latent)
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 21
Conduction
The flow of heat between two adjacent and touching solids (or from one part to another part within an object) by direct interaction between molecules
example: walking on a beach in your bare feet
for comfort, the key environmental variable is: SURFACE TEMPERATURE
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 22
Convection
The flow of heat from the surface of a material to/from a surrounding fluid (usually air); the free motion of molecules of the fluid is very important in promoting heat flow example: fanning yourself with a newspaper
for comfort, the key environmental variables are: AIR TEMPERATURE | AIR SPEED
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 23
Radiation
The flow of heat between objects that are not in direct contact—but that can “see” each other via electromagnetic radiation; the objects may be a few inches or a million miles apartexample: warming yourself in front of a fireplace
for comfort, the key environmental variable is: SURFACE TEMPERATURE
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 24
Evaporation The flow of heat that must be provided as
a material changes state (from a liquid to a gas); this heat represents the energy required to break molecular bonds (called the latent heat of vaporization)
example: feeling cool coming out of a swimming pool on a breezy day
for comfort, the key environmental variables are: RELATIVE HUMIDITY | AIR SPEED
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 25
The Mechanisms Adapt
the body automatically adapts to surrounding environmental conditions in its quest for thermal equilibrium; under high temperatures, evaporation becomes critically important
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 26
Environmental Comfort Factors
• Air temperature (dry bulb – deg F)• Relative humidity (%)• Air speed (ft per min)• Radiant conditions
– Mean radiant temperature [MRT] in deg F – or other radiation value in Btuh per sf
These factors are controllable through design – a passive system should control all four factors; an active (HVAC) system is expected tocontrol the first three (with “architecture” controlling the fourth)
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 27
Measuring Environmental Factors
data logging
air temperature,
RH, wind speed
air speed
surfacetemperature
wet and dry bulb temperatures
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 28
MRT
MRT stands for mean radiant temperature
MRT is the (hypothetical) uniform temperature of surrounding surfaces with
which the human body would exchange the same heat by radiation as occurs in an
actual (non-uniform) environment
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 29
MRT
Surface temperatures in a typical room are often not all the same (for example, cold
window glass, warm radiators); the human body will radiate to/from these different surfaces. MRT is the temperature (if all
surfaces were at this one temperature) at which the body would exchange the same heat by radiation as occurs in the messy,
many-temperature real space.
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 30
Estimating MRT
MRT = (angle 1)(temp 1) + (angle 2)(temp 2) + ….
360 deg
repeat for two additional space views … and then average
11
2
2
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 31
Personal Factors Affecting Comfort
• Physical– Clothing (specifically its insulation value in “clo”)– Activity level (specifically metabolic heat
production in “met”)
• Mental– State of mind (experiences, expectations,
influences of other conditions, …)
These factors are not controlled through design, but must be understood by a designer as they will affect occupant thermal comfort responses
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 32
Typical clo Values
http://www.homeenergy.org/
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 33
Typical met Values
http://www.homeenergy.org/
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 34
Physical Basis of Thermal Comfort
The potential for thermal equilibrium is:– Influenced by environmental factors
• Often common to all occupants in a space• Designer must control these conditions
– Influenced by personal physical factors• Individual to each occupant in a space • Designer must be aware of and consider these
conditions
Ball State Architecture | ENVIRONMENTAL SYSTEMS 1 | Grondzik 35
The Designer’s Job
Understand the physical basis of thermal comfort and related variables
Appreciate the influence of the psychological aspects of thermal comfort
Use this understanding and appreciation to design spaces that building users will decide are thermally comfortable