Balcrank Products Inc. Air Operated Pump Training Presentation, 2/2007.
-
Upload
osborne-garrett -
Category
Documents
-
view
216 -
download
1
Transcript of Balcrank Products Inc. Air Operated Pump Training Presentation, 2/2007.
Balcrank Products Inc.Air Operated Pump Training
Presentation, 2/2007
Bobcat 130 Features Heavy duty air motor with thick
wall housing and long stroke design
Double acting, true pump ratios and balanced flow displacement
High performance lower pump assembly
Enlarged flow passages and fast action check valves
Bobcat 130 Features Quiet operation: 70-82 dba Five-Year Limited Warranty, five
year parts, labor and mileage – high value price point
For transfer pumping up to 150 feet or up to 3-reel simultaneous service
Standard Duty Cycles
Bobcat 130 Specifications Pressure ratio – 1.3:1 Air motor bore – 2.12” Eff. diameter – 1.77” Stroke – 3.5” Op. air pres. range – 40-150 psi Air consumption – 2.2
(SCFM, 100 psi air) Free flow – 15.4 gpm @ 100 psi Noise level range – 70-82 DbA
Bobcat 130 Specifications Suction lift (in mercury) – 18 Air inlet NPT(F) – 1/4” Fluid inlet NPT(F) – 1” Fluid outlet NPT(F) – 3/4” Cycles per gallon – 30 Max gal. dispensed per year –
24,000 Wetted materials – Carbon steel,
Buna, Nickel Plating, Acetal, Stainless Steel, (SS-Pump uses Viton)
Bobcat 130 Models 1110-005 – Carbon Steel Stub 1110-006 – Carbon Steel Drum
length 1160-002 – Stainless Steel Stub 1160-006 – Stainless Steel
Drum length
Bobcat 130 Applications WHERE
Car Dealerships Quick Lubes Mobile Lube Trucks Service Stations Outdoor Applications Industrial Plants
WHEN Piping runs are less than
150’ long Single point dispense
applications Transferring lubricants
from bulk container to smaller container
Dispensing from 55 gallon drums
Dispensing food and/or water based products when Stainless Steel Lower is required
Competitive Analysis – 1.3:1 Bobcat Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1110-005 222051 7222-B4 84829
Carbon Steel Drum Length 1110-006 222103 7216-4 82230
Stainless Steel Stub 1160-002 226945 7880-C1 -
Stainless Steel Drum Length
1160-006 226942 7216-B -
Competitive Analysis – 1.3:1 Bobcat Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1110-005 222051 7222-B4 84829
Pressure Ratio 1.3:1 1:1 1:1 1:1
Air Inlet 1/4” 1/4” 1/4” 1/4”
Fluid Inlet 1” 1-1/2” 1” 1”
Fluid Outlet 3/4” 3/4” 1” 3/4”
Wetted Parts
Carbon Steel, Buna, Nickel
Plating, Acetal, Aluminum
Carbon Steel, Polyurethane
Carbon Steel
Buna
Carbon Steel, Aluminum, Plastic,
Buna
Competitive Analysis – 1.3:1 Bobcat Pump
195
150 150 150
0
50
100
150
200
Balcrank1110-005
Graco222051
Alemite 7222-B4
Lincoln84829
Stall Pressure at 150 psi
Competitive Analysis – 1.3:1 Bobcat Pump
15.4
10 10
14
0
5
10
15
20
Balcrank1110-005
Graco222051
Alemite7222-B4
Lincoln84829
Free Flow at 100 psi
Bobcat 3:1 Features Heavy duty air motor with thick
wall housing and long stroke design
Double acting, true pump ratios and balanced flow displacement
High performance lower pump assembly
Enlarged flow passages and fast action check valves
Bobcat 3:1 Features Quiet operation, 70-82 dba Used for distribution to 500 ft –
recommended usage be 2-reel simultaneous service
Includes universal bung adapter Standard Duty Cycles
Bobcat 3:1 Specifications Pressure ratio – 3:1 Air motor bore – 2.12” Eff. diameter – 1.77” Stroke – 3.5” Op. air pres. range – 40-150 psi Air consumption – 4.0
(SCFM, 100 psi air) Free flow – 6.3 gpm @ 100 psi Noise level range – 70-82 DbA
Bobcat 3:1 Specifications Suction lift (in mercury) – 18 Air inlet NPT(F) – 1/4” Fluid inlet NPT(F) – 3/4” Fluid outlet NPT(F) – 1/2” Cycles per gallon – 80 Max gal. dispensed per year –
10,000 Wetted materials – Carbon steel,
Buna, Nickel Plating, Stainless Steel
Bobcat 3:1 Models 1130-005 – Carbon Steel Stub
Bobcat 3:1 Applications WHERE
Quick Lubes Mobile Lube Trucks Service Stations Outdoor Applications Industrial Plants
WHEN Piping runs are less
than 500’ long Dual point dispense
applications Noise levels are of
concern because employees will be working nearby
Dispensing from all types of containers
Competitive Analysis – 3:1 Bobcat Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1130-005 244047 7204 282396
Competitive Analysis – 3:1 Bobcat Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1130-005 244047 7204 282396
Pressure Ratio 3:1 3:1 3:1 3:1
Air Inlet 1/4” 3/8” 1/4” 1/4”
Fluid Inlet 3/4” 1-1/2” 3/4” 1”
Fluid Outlet 1/2” 1/2” 1.0” 1/2”
Wetted PartsCarbon Steel, Buna, Nickel
Plating, Aluminum
Carbon Steel, Polyurethane,
Buna
Carbon Steel
Buna
Carbon Steel, Aluminum, Plastic,
Buna
Competitive Analysis – 3:1 Bobcat Pump
6.3
5 5
6
0
1
2
3
4
5
6
7
Balcrank1130-005
Graco244047
Alemite 7204
Lincoln282396
Free Flow at 100 psi
Panther 3:1 Features Built-in pressure relief valve Double acting, true pump ratios
and balanced flow displacement Positive trip air valve prevents
stalling Heavy duty air motor with thick
wall housing and long stroke design
Enlarged flow passages and fast action check valves
Panther 3:1 Features Smooth, quiet operation, 77-88
dba Five-Year Limited Warranty, five
year parts, labor and mileage – high value price point
Used for distribution to 500 ft and up to 3 reel simultaneous service
Medium to high duty cycles
Panther 3:1 Features Pressure ratio – 3:1 Air motor bore – 3.49” Eff. diameter – 2.50” Stroke – 3.25” Op. air pres. range – 10-150 psi Air consumption – 3.6
(SCFM, 100 psi air) Free flow – 7.7 gpm @ 100 psi Noise level range – 77-88 DbA
Panther 3:1 Features Suction lift (in mercury) – 20 Air inlet NPT(F) – 1/4” Fluid inlet NPT(F) – 1” (F),
1-1/2” (M) Fluid outlet NPT(F) – 3/4” Cycles per gallon – 30 Max gal. dispensed per year –
28,000
Panther 3:1 Features Wetted Materials – Nickel
Plated Steel, Buna, Zinc Plated Steel, Stainless Steel, & Ultrathane
Service Bulletin … SB1064
Panther 3:1 Models 1130-015 – Carbon Steel Stub 1130-017 – Carbon Steel Stub,
Flange Mount 1130-020 – Carbon Steel Stub
with bung adapter
Panther 3:1 Applications WHERE
Car Dealerships Quick Lubes Mobile Lube Trucks Service Stations Outdoor Applications Industrial Plants
WHEN Piping runs are less
than 500’ long 3-point simultaneous
dispense applications Noise levels are of
concern because employees will be working nearby
Dispensing from all types of containers
Competitive Analysis – 3:1 Panther Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1130-015 246775 9918-A 282396
Competitive Analysis – 3:1 Panther Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1130-015 246775 9918-A 282396
Pressure Ratio 3:1 3:1 3:1 3:1
Air Inlet 1/4” 3/8” 1/4” 1/4”
Fluid Inlet 1” (F) 1-1/2” (M) 1-1/2” 1-1/2” 1”
Fluid Outlet 3/4” 1/2” 1/2” 1/2”
Wetted Parts
Carbon Steel, Buna, Nickel
Plated Steel, Zinc Plated Steel, Ultrathane
Carbon Steel, Polyurethane,
Buna-
Carbon Steel, Aluminum, Plastic,
Buna
Competitive Analysis – 3:1 Panther Pump
7.7
3
9
6
0
2
4
6
8
10
Balcrank 1130-015
Graco 246775 Alemite 9918-A Lincoln 282396
Free Flow at 100 psi
Panther 5:1 Features Built-in pressure relief valve Double acting, true pump ratios
and balanced flow displacement Positive trip air valve prevents
stalling Heavy duty air motor with thick
wall housing and long stroke design
Enlarged flow passages and fast action check valves
Panther 5:1 Features Smooth, quiet operation, 77-88
dba Five-Year Limited Warranty, five
year parts, labor and mileage – high value price point
Used for distribution to 500 ft and up to 3 reel simultaneous service
Medium to high duty cycles
Panther 5:1 Features Pressure ratio – 5:1 Air motor bore – 3.49” Eff. diameter – 2.50” Stroke – 3.25” Op. air pres. range – 10-150 psi Air consumption – 5.7
(SCFM, 100 psi air) Free flow – 6.1 gpm @ 100 psi Noise level range – 77-88 DbA
Panther 5:1 Features Suction lift (in mercury) – 20 Air inlet NPT(F) – 1/4” Fluid inlet NPT(F) – 1” (F),
1-1/2” (M) Fluid outlet NPT(F) – 1/2” Cycles per gallon – 62 Max gal. dispensed per year –
18,000
Panther 5:1 Features Wetted Materials – Nickel
Plated Steel, Buna, Zinc Plated Steel, Stainless Steel, & Ultrathane
Service Bulletin … SB1064
Panther 5:1 Models 1130-016 – Carbon Steel Stub 1130-018 – Carbon Steel Stub,
Flange Mount 1130-021 – Carbon Steel Stub
with bung adapter
Panther 5:1 Applications WHERE
Car Dealerships Quick Lubes Mobile Lube Trucks Service Stations Outdoor Applications Industrial Plants
WHEN Piping runs are less
than 750’ long 3-point simultaneous
dispense applications Noise levels are of
concern because employees will be working nearby
Dispensing from all types of containers
Competitive Analysis – 5:1 Panther Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1130-016 203876 9968 84933
Competitive Analysis – 5:1 Panther Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1130-016 203876 9968 84933
Pressure Ratio 3:1 5:1 5:1 5:1
Air Inlet 1/4” 3/8” 1/4” 1/4”
Fluid Inlet 1” (F) 1-1/2” (M) 1-1/2” 1-1/2” 1”
Fluid Outlet 1/2” 1/2” 1/2” 1/2”
Wetted Parts
Carbon Steel, Buna, Nickel
Plated Steel, Zinc Plated Steel, Ultrathane
Carbon Steel, Polyurethane,
Buna-
Carbon Steel, Aluminum, Plastic,
Buna
Competitive Analysis – 5:1 Panther Pump
6.1
3
76
0
2
4
6
8
Balcrank 1130-016
Graco 203876 Alemite 9968 Lincoln 84933
Free Flow at 100 psi
Tiger 5:1 Features Built-in pressure relief valve Double acting, true pump ratios
and balanced flow displacement Positive trip air valve prevents
stalling Heavy duty, long stroke, large
displacement air motor with thick wall housing
Enlarged flow passages and fast action check valves
Tiger 5:1 Features Smooth, quiet operation Lifetime warranty, high value
price point Used for distribution pumping to
distances of 700 ft and up to 6 reel simultaneous service
Medium to high usage duty cycles
Tiger 5:1 Features Pressure ratio – 5:1 Air motor bore – 4.5” Eff. diameter – 2.47” Stroke – 3.25” Op. air pres. range – 30-150 psi Air consumption – 6.0
(SCFM, 100 psi air) Free flow – 18.5 gpm @ 100 psi Noise level range – 74-82 DbA
Tiger 5:1 Features Suction lift (in mercury) – 20 Air inlet NPT(F) – 3/8” Fluid inlet NPT(F) – 1” (F),
1-1/2” (M) Fluid outlet NPT(F) – 3/4” Cycles per gallon – 18 Max gal. dispensed per year –
24,000
Tiger 5:1 Features Wetted Materials – Nickel
Plated Steel, Buna, Zinc Plated Steel, Stainless Steel, & Ultrathane
Service Bulletin … SB1065
Tiger 5:1 Models 1130-019 – Carbon Steel Stub 1130-025 – Carbon Steel Stub,
Flange Mount 1130-026 – Carbon Steel Stub
with bung adapter 1160-007 – Stub pump with
Stainless Steel Lower Pumping Chamber
Tiger 5:1 Applications WHERE
Car Dealerships Quick Lubes Mobile Lube Trucks Service Stations Outdoor Applications Industrial Plants
WHEN Piping runs are less than
750’ long 6-point simultaneous
dispense applications Noise levels are of
concern because employees will be working nearby
Dispensing from all types of containers
Dispensing food and/or water based products when Stainless Steel Lower is required
Competitive Analysis – 5:1 Tiger Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1130-019 238108
(6:1)
7783-C4
(6:1)
1951
(6:1)
Competitive Analysis – 5:1 Tiger Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1130-019 238108 7783-C4 1951
Pressure Ratio 5:1 6:1 6:1 6:1
Air Inlet 3/8” 1/2” 3/4” 1/2”
Fluid Inlet 1” (F) 1-1/2” (M) 1-1/2” 1-1/2” 1”
Fluid Outlet 3/4” 3/4” 1/2” 3/4”
Wetted Parts
Carbon Steel, Buna, Nickel
Plated Steel, Zinc Plated Steel, Ultrathane
Carbon Steel, Polyurethane,
Buna
Carbon Steel, Buna-N
Carbon Steel, Aluminum, Plastic,
Buna
Competitive Analysis – 5:1 Tiger Pump
18.5
1210 10
0
5
10
15
20
Balcrank1130-019
Graco237526
Alemite 7783-C4
Lincoln 1951
Free Flow at 100 psi
Lion 5:1 Features To be redesign to include Built-in
pressure relief valve later in year. Double acting, true pump ratios and
balanced flow displacement Positive trip air valve prevents stalling Heavy duty, long stroke, large
displacement air motor with thick wall housing
Enlarged flow passages and fast action check valves
Lion 5:1 Features Smooth, quiet operation Five-Year Limited Warranty, five
year parts, labor and mileage – high value price point
Used for distribution pumping to distances of 700 ft and up to 8 reel simultaneous service
High usage duty cycles
Lion 5:1 Features Pressure ratio – 5:1 Air motor bore – 6.0” Eff. diameter – 4.2” Stroke – 3.25” Op. air pres. range – 40-125 psi Air consumption – 5.4
(SCFM, 100 psi air) Free flow – 22.5 gpm @ 100 psi Noise level range – 80-90 DbA
Lion 5:1 Features Suction lift (in mercury) – 20 Air inlet NPT(F) – 1/2” Fluid inlet NPT(F) – 1” (F),
1-1/2” (M) Fluid outlet NPT(F) – 1-1/2” Cycles per gallon – 12 Max gal. dispensed per year –
120,000
Lion 5:1 Features Wetted Materials – Carbon
Steel. Brass, Viton, Buna, Nickel Plated Steel, Polyurethane, & Aluminum
Service Bulletin … SB1073
Lion 5:1 Models 1130-027 – Carbon Steel Stub 1131-025 – Outfit, Wall Mount
Lion 5:1 Applications WHERE
Car Dealerships Quick Lubes Outdoor Applications Industrial Plants
WHEN Piping runs are
greater than 700’ long 8-point simultaneous
dispense applications Noise levels are of
concern because employees will be working nearby
Dispensing from all types of containers
Competitive Analysis – 5:1 Lion Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1130-027 238108
(6:1)
7783-C4
(6:1)
1951
(6:1)
Competitive Analysis – 5:1 Lion Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1130-027 238108 7783-C4 1951
Pressure Ratio 5:1 6:1 6:1 6:1
Air Inlet 1/2” 1/2” 3/4” 1/2”
Fluid Inlet 1” (F) 1-1/2” (M) 1-1/2” 1-1/2” 1”
Fluid Outlet 1-1/2” 3/4” 1/2” 3/4”
Wetted Parts
Carbon Steel, Buna, Nickel
Plated Steel, Zinc Plated Steel, Ultrathane
Carbon Steel, Polyurethane,
Buna
Carbon Steel, Buna-N
Carbon Steel, Aluminum, Plastic,
Buna
Competitive Analysis – 5:1 Lion Pump
22.5
12 10 10
05
10152025
Balcrank 1130-027
Graco 237526Alemite 7783-C4
Lincoln 1951
Free Flow at 100 psi
Lion 10:1 Features Built-in pressure relief valve Double acting, true pump ratios
and balanced flow displacement Positive trip air valve prevents
stalling Heavy duty, long stroke, large
displacement air motor with thick wall housing
Enlarged flow passages and fast action check valves
Lion 10:1 Features Smooth, quiet operation Five-Year Limited Warranty, five
year parts, labor and mileage – high value price point
Used for distribution pumping to distances of 1000 ft and up to 6 reel simultaneous service
High usage duty cycles
Lion 10:1 Features Pressure ratio – 10:1 Air motor bore – 6.0” Eff. diameter – 4.2” Stroke – 3.25” Op. air pres. range – 40-125 psi Air consumption – 10.8
(SCFM, 100 psi air) Free flow – 16.2 gpm @ 100 psi Noise level range – 80-90 DbA
Lion 10:1 Features Suction lift (in mercury) – 20 Air inlet NPT(F) – 1/2” Fluid inlet NPT(F) – 1” (F),
1-1/2” (M) Fluid outlet NPT(F) – 3/4” Cycles per gallon – 26 Max gal. dispensed per year –
65,000
Lion 10:1 Features Wetted Materials – Nickel
Plated Steel, Buna, Zinc Plated Steel, Stainless Steel, & Ultrathane
Service Bulletin … SB1073
Lion 10:1 Models 1130-024 – Carbon Steel Stub 1131-004 – Outfit, Drum Mount 1131-026 – Outfit, Wall Mount
Lion 10:1 Applications WHERE
Large Car Dealerships Large Municipalities Military Specifications Industrial Plants
WHEN Piping runs are greater
than 1000’ long 6-point simultaneous
dispense applications Noise levels are of
concern because employees will be working nearby
High Usage duty cycles When dispensing from
all types of containers
Competitive Analysis – 10:1 Lion Pump
BALCRANK GRACO ALEMITE LINCOLN
Carbon Steel Stub 1130-024 205626 7793-C
(12:1)
1914
(12:1)
Competitive Analysis – 10:1 Lion Pump
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1130-024 205626 7793-C 1914
Pressure Ratio 10:1 10:1 12:1) 12:1
Air Inlet 1/2” 1/2” 3/4” 1/2”
Fluid Inlet 1” (F) 1-1/2” (M) 1-1/2” 1-1/2” 1-1/2”
Fluid Outlet 3/4” 3/4” 3/4” 3/4”
Wetted Parts
Carbon Steel, Buna, Nickel
Plated Steel, Zinc Plated Steel, Ultrathane
Carbon Steel, Polyurethane,
Buna
Carbon Steel, Buna-N
Carbon Steel, Buna-N
Competitive Analysis – 10:1 Lion Pump
16.212
6.54.4
0
5
10
15
20
Balcrank1130-024
Graco205626
Alemite7793-C
Lincoln 1914
Free Flow at 100 psi
Panther 50:1 Features Pressure ratio – 50:1 Air motor bore – 3.5” Eff. diameter – 2.44” Stroke – 3.25” Op. air pres. range – 30-150 psi Air consumption – 6.2
(SCFM, 100 psi air) Free flow – 3.5 lb/min @ 150 psi Noise level range – 77-82 DbA
Panther 50:1 Features Air inlet NPT(F) – ¼” Fluid outlet NPT(F) – 1/4” Wetted Materials; Carbon Steel,
Buna, Brass, S/S Delrin and Ultrathane
Service Bulletin: SB1063
Panther 50:1 Models 1150-009 – Bare Pump …25/35lb 1130-010 – Bare Pump … 120lb 1130-011 – Bare Pump … 400lb
Competitive Analysis – 50:1 Panther
BALCRANK GRACO ALEMITE LINCOLN
25 – 35 lb Bare Pump
120 lb Bare Pump
400 lb Bare Pump
1150-009
1150-010
1150-011
244044
244045
244046
9911-1
9950-1
9979
83513
82050
84668
Competitive Analysis – 50:1 Panther
BALCRANK GRACO ALEMITE LINCOLN
Model Number
1150-009
1150-010
1150-011
244044
244045
244046
9911-1
9950-1
9979
83513
82050
84668
Pressure Ratio 50:1 50:1 50:1 50:1
Air Inlet 1/4” 3/8” 1/4” 1/4”
Fluid Inlet - - - -
Fluid Outlet 3/8” 1/4” 3/8” 1/4”
Wetted PartsCarbon Steel,
Buna, Brass, S/S, Delrin, Ultrathane
Carbon Steel, Polyurethane,
Buna
Carbon Steel, Buna
Carbon Steel, Buna
Competitive Analysis – 50:1 Panther
3.5
2.5
4.5
3
0
1
2
3
4
5
Balcrank Graco Alemite Lincoln
Free Flow at 100 psi
Lion 50:1 Features Pressure ratio – 50:1 Air motor bore – 6.0” Eff. diameter – 4.25” Stroke – 3.25” Op. air pres. range – 30-150 psi Air consumption – 6.2 (SCFM,
@ 100 psi air) Free flow – 16 lb/min @100 psi Noise level range – 80-90 DbA
Lion 50:1 Features Air inlet NPT(F) – ½” Fluid outlet NPT(F) – 3/4” Wetted Materials; Carbon Steel,
Buna, Aluminum, S/S, and Ultrathane
Service Bulletin: SB1074
Lion 50:1 Models 1150-015 – Bare Pump 1151-018 – Outfit-400lb-stationary
Competitive Analysis – 50:1 Lion
BALCRANK GRACO ALEMITE LINCOLN
400 lb Bare Pump 1150-015 2053956 7786-A5 1910
Competitive Analysis – 50:1 Lion
BALCRANK GRACO ALEMITE LINCOLN
Model Number 1150-015 205395 7786-A5 1910
Pressure Ratio 50:1 50:1 75:1 50:1
Air Inlet 1/2” 1/2” 1/2” 1/2”
Fluid Inlet - - - -
Fluid Outlet 3/8” 3/8” 3/4” 3/4”
Wetted PartsCarbon Steel,
Buna, Brass, S/S, Delrin, Ultrathane
Carbon Steel, Polyurethane,
Buna
Carbon Steel, Buna
Carbon Steel, Buna
Competitive Analysis – 50:1 Lion
18.5
1012
10
0
5
10
15
20
Balcrank Graco Alemite Lincoln
Free Flow at 100 psi