Backplane connector

High Speed Backplane Connectors


Signal Integrity Services: Taking SI to the Next LevelSolutionsOur goal is to apply system-level expertise to design, simulate, and verify a system to meet your performance goals. We have completed hundreds of system designs and have years of experience in system layout, design, simulation and product selection. We have an extensive library of TE Connectivitys product models ready to go to work on your design, utilizing our modeling skills and techniques.

SimulationDisclaimer While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 2012, 2008 and 2005 Tyco Electronics Corporation. All Rights Reserved. ACTION PIN, AMP, AMP-HDI, CHAMP, MULTI-BEAM XL, MULTIGIG RT, SEC-Z, TRI-Q, Z-DOK, Z-PACK, Z-PACK Slim UHD, Z-PACK TinMan, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. AdvancedTCA is a trademark of PICMGPCI Industrial Computer Mfgs. Group. ALPHA is a trademark of Digital Equipment Corporation. AMD is a trademark of Advanced Micro Devices, Inc. CompactPCI is a trademark of PICMGPCI Industrial Computer Mfgs. Group. IGES is a trademark of IAMBA Networks, Inc. INFINIBAND is a trademark of the InfiniBand Trade Association. LOCTITE is a trademark of Henkel Corp. PCI Express is a trademark of PCI-SIG. PRO/E is a trademark of Parametric Technology Corp. RAPIDIO is a trademark of RAPIDIO, Inc. SPARC is a trademark of SPARC International, Inc. STARFABRIC is a trademark of StarGen, Inc. TELCORDIA is a trademark of Telcordia Technologies, Inc. VITA, VMEbus, VPX, and VXS are trademarks of VITA. Other logos, product and Company names mentioned herein may be trademarks of their respective owners.

TEs Signal Integrity engineers use a very sophisticated suite of tools to provide accurate connector and system models to 20 GHz and beyond. Whether we are analyzing a connector or an entire system, we have the tools and expertise to get the right answer. Our tool suite includes 2D and 3D full-wave analysis, with solutions in both the time and frequency domains.

ModelsTE provides a variety of tools to aid customers in their design:I

SPICE single-line and multi-line models S-parameter models Customer evaluation boards using realistic system implementations Electrical Performance Reports (EPRs) with information on many high speed products.

I I

I

TestingWith measurement capabilities beyond 10 Gb/s and 50 GHz, TE can characterize and provide detailed measurements of various products. Measurements of a product within a system, including measurements from silicon companies that have teamed with TE, can be invaluable to provide the successful implementation of a design. For more info: [email protected] [email protected] www.te.com/products/simulation/Dimensions are in millimeters and inches unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015

2Catalog 1773095 Revised 4-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change.


Table of ContentsZ-PACK TinMan High Speed, High Density Backplane Connector . . . . . . . . . . . . . . 5-48 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 6 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4 Pair Vertical Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 6 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 17 5 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 21 4 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 25 3 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 29 5 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5 Pair Right Angle Pin Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . 31 4 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4 Pair Right Angle Pin Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . 33 3 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3 Pair Right Angle Pin Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . 35 Z-PACK TinMan Midplane (Orthogonal) Connector Overview . . . . . . . . . . . . . . . . . . 36-38 6 Pair Midplane Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-45 Z-PACK TinMan Product Mating Sequence Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Z-PACK Slim UHD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-54 Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Connector Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Flexibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Upgradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Connector Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Restriction on the use of Hazardous Substances (RoHS)At TE, were ready to support your RoHS requirements. Weve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: RoHS Compliant Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly Out of Scope of the RoHS Directive such as hand tools and other nonelectrical accessories. NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced at right.

Getting the Information You NeedOur comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: n Cross-Reference from Non-compliant to Compliant Products n Ability to browse RoHS Compliant Products in our on-line catalog n Downloadable Technical Data Customer Information Presentation n More detailed information regarding the definitions used above n So whatever your questions when it comes to RoHS, we have the answers at www.te.com/leadfree

RoHSCustomer Support Center

3Catalog 1773095 Revised 4-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters and inches unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015


Table of Contents (Continued)Z-PACK Slim UHD Connector (Continued) Typical Electrical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Female and Male Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Right-Angle Male (RAM) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Guide Pins and Guide Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Z-PACK HM-Zd Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-94 Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 4, 3, and 2 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . 57-59 4 Pair Vertical Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 4, 3, and 2 Pair Vertical Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-63 4, 3, and 2 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . 64-66 Power and Guide Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67-73 AdvancedTCA Connectors and Guide/Key Modules . . . . . . . . . . . . . . . . . . . . . . . . . 74, 75 4 and 2 Pair Pin Headers for Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 4 Pair 5 and 10 Column Push-to-Release Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . 77 2 Pair 5 and 10 Column Push-to-Release Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . 77 4 Pair Cable Assemblies for Backplane Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Recommended Printed Circuit Board Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-88 PC Board Routing Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Connector Housing Gathering Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Mating Sequence Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Application Tooling and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93 Compatible 2mm HM Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Z-PACK HS3 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95-136 Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-98 Part Number Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99, 100 6 Row Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101-112 10 Row Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-126 Coding Keys (10 Row Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Power and Guide Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127-133 Mating Sequence Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Application Tooling and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 MULTIGIG RT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137-162 Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Connector Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Mating Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-143 Customization Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144-146 MULTIGIG RT Tier 1 Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148 MULTIGIG RT Tier 2 Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149, 150 Connector Selection Grid for VITA 41 VXS Compliant Connector . . . . . . . . . . . . . 151-153 Connector Selection Grid for VITA 46 VPX Compliant Connector . . . . . . . . . . . . . . 154-157 New MULTIGIG RT Stacking Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Power Modules and Guide Hardware Reference . . . . . . . . . . . . . . . . . . . . . . . . . . 159-162 Z-DOK and Z-DOK + Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163-176 Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Electrical Performance and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165-167 Z-DOK +2 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168, 169 Z-DOK +4 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170, 171 Z-DOK +6 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172-174 Sequencing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 Work Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 High Speed Card Edge Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177-186 High Speed Standard Edge Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-183 SEC-Z Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184-186 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187, 188Dimensions are in millimeters and inches unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015

VITA, VMEbus, VPX, and VXS are trademarks of VITA.



Table of ContentsZ-PACK TinMan High Speed, High Density Backplane Connector . . . . . . . . . . . . . . 5-48 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 6 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 Pair Right Angle Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4 Pair Vertical Receptacle Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 6 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 17 5 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 21 4 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 25 3 Pair Vertical Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3 Pair Vertical Header Assemblies Left End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3 Pair Vertical Header Assemblies Right End Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3 Pair Vertical Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . . . . . . . 29 5 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5 Pair Right Angle Pin Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . 31 4 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4 Pair Right Angle Pin Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . 33 3 Pair Right Angle Pin Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3 Pair Right Angle Pin Header Assemblies Double End Walls . . . . . . . . . . . . . . . . . . . 35 Z-PACK TinMan Midplane (Orthogonal) Connector Overview . . . . . . . . . . . . . . . . . . . 36-38 6 Pair Midplane Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-45 Z-PACK TinMan Product Mating Sequence Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

1Z-PACK TinMan High Speed, High Density Backplane Connector5

Catalog 1773095 Revised 4-12 www.te.com

Dimensions are shown for reference purposes only. Specifications subject to change.

Dimensions are in millimeters and inches unless otherwise specified. USA: +1 (800) 522-6752

Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999

UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015


IntroductionProduct FactsI I

10+ Gbps performance 100 ohm Impedance for Differential Pair configuration 5 pair version offers 26 pairs/10mm [66 differential pairs/inch] fitting within a 25.40 [1.00] card slot pitch 4 pair version offers 21 pairs/10mm [53 differential pairs/inch] fitting within a 20.30 [.800] card slot pitch 3 pair version offering 16 pairs/10mm [40 differential pairs/inch] fitting within a 16.25 [.625] card slot pitch Right angle pin headers (coplanar) in 3 pair, 4 pair, and 5 pair versions Reliable, redundant contact design on every signal contact Modular system offered in various column versions Meets Industry reliability requirements of Bellcore/ Telcordia Sequencing for ground and signal contacts RoHS Compliant The Z-PACK TinMan backplane connector family is a cost-effective solution for customers searching for a high density, high performance backplane interconnect system. The Z-PACK TinMan connector design follows proven industry backplane convention by offering a fully protected right-angle receptacle for use on daughtercards where handling damage can be a concern when mating to a vertical male header. This connector permits field repairability at either the module or single pin levels. Ground contacts positioned within each column of the connector, combined with unique contact lead frame arrangements, enable the Z-PACK TinMan connector to achieve low crosstalk and high through-put performance levels. Reliability is provided with a dual point of contact mating interface and compliant pin interface to the printed circuit board. Industry Applications Ideally designed for cost pressured, high signal density applications requiring interconnection between two printed circuit boards, such as those typically found in server, storage, switch, router, and similar applications. The Z-PACK TinMan connector product family is suited to meet the demands of todays modular system designs by offering a variety of configurations. The product family includes configurations to fit 20.32 [.800] and 25.40 [1.00] card slot spacing. Technical DocumentsProduct Specification 108-2303 Application Specification 114-13202 Routing Guide Report #27GC001-1

I

I

I

I

I

Material and FinishSignal Contact High Strength Copper Alloy Ground Contact High Strength Copper Alloy Housing Liquid Crystal Polymer, UL 94V-0 Rated Platings Telcordia compliant interface, Nickel underplate Compliant Pin Plating RoHS Compliant

I

I

I

I

RatingsTemperature Range -65C to +90C Current Rating 0.5 A/contact @ < 30C T-Rise Durability 200 cycles Dielectric Withstanding Voltage 560 VAC Operating Voltage 250 VAC max.

Future Product ExtensionsI I

Vertical receptacles High speed cable assemblies and hardware

Signal IntegrityCharacteristic Impedance Differential @ 100 ohms 10% Crosstalk Multi-pair differential crosstalk: 2.1% @ 50ps Insertion Loss -2 dB @ 10 GHz

TELCORDIA is a trademark of Telcordia Technologies, Inc.

For additional information visit: http://www.te.com/zpacktinmanDimensions are in millimeters and inches unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015



Introduction (Continued)Noise TableI Victim Pair AB9 BC8 DE9 EF8 GH9 HI8 JG9 KL8 MN9 NO8 Total Peak Receiver Noise for Recommended Pin-Out 0.8% 1.6% 1.9% 1.9% 2.0% 2.0% 2.0% 2.1% 1.7% 0.8%

Maximum, multiple source crosstalk

1Z-PACK TinMan High Speed, High Density Backplane Connector

Note: Data includes PCB vias of both backplane and daughtercard connectors. Single mated connector pair 50 ps (20-80%) edge rate

Insertion Loss Plot



Introduction (Continued)Representative Eye PatternI I I

10.0 Gbps data rate 27-1 PRBS Unequalized Signal

Customer Connector Evaluation KitI I

Connector characterization Available for loan contact your local TE Sales Engineer Time and frequency domain testable Testable to 18+ GHz (25+ Gb/s) Multiple calibration options Convenient SMA interface

I

I I I

Customer System Evaluation KitI I

System characterization Available for loan contact your local TE Sales Engineer Time and frequency domain testable Testable to 18+ GHz (25+ Gb/s) Multiple system lengths Convenient SMA interface

I

I I I



6 Pair Right Angle Receptacle AssembliesColumn 8 10 16 Part Number 1934504-1 2065021-1 1934912-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling * * * Mates With 1934505-1, 1934513-1, 1934514-1, 1934515-1 1934520-1, 1934523-1 1934516-1, 1934519-1


* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202.A 1.90 Ref. [.075] 36.01 0.05 [1.418 .002]

23.70 Ref. [.933]

26.50 0.08 [1.043 .003] 28.60 0.10 [1.126 .004]

1.40 Ref. [.055]

Row A 2.20 Ref. [.087] Row A 1.70 Ref. [.067] 9.30 Ref. [.366] 11.00 Ref. [.433] Finished Hole Size and Plated Through Holes* Connector Outline -XRow R Row Q Row P Row O Row N Row M Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.21 Ref. [.048]

1.40 Ref. [.055] 23.80 Ref. [.937]

23.80 Ref. [.937] 1.40 Typ. [.055] 1.50 Max. [.059] 8 1 -Y-

1.25 Ref. [.049] BSC

1.90 Typ. [.075] 0.80 Ref. [.031] B

BSC

Recommended PC Board Layout Daughterboard Component Side Shown Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202

Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in press-fit connectors.



5 Pair Right Angle Receptacle AssembliesColumn 8 10 16 Part Number 1934218-1 1934220-1 1934221-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling * * * Mates With 1934269-1,(R) 1934272-1,(L) 1934273-1, 1934271-1, 1934349-1, 1934350-1 1934325-1, 1934326-1 1934331-1, 1934334-1, 1934333-1, 1934332-1, 1934347-1, 1934348-1

* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202.

A 1.90 Ref. [.075]

31.81 0.05 [1.252 .002]

19.50 [.768]

24.40 0.10 [.961 .004] 22.30 0.08 [.878 .003]

1.40 Ref. [.055] Row A 2.20 Ref. [.087] 1.40 Ref. [.055] Row A

9.30 Ref. [.366] 1.70 Ref. [.067]

19.60 Ref. [.772]

11.00 Ref. [.433]

Finished Hole Size and Plated Through Holes* Connector Outline -XRow O Row N Row M Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.21 Ref. [.048]

1.40 Typ. [.055]

19.60 Ref. [.772]

1.50 Max. [.059] 8 1 -Y1.90 Typ. [.075] 0.80 Ref. [.031] B BSC

1.25 Ref. [.049] BSC

Recommended PC Board Layout Daughterboard Component Side Shown

*Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1.

* Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202




4 Pair Right Angle Receptacle AssembliesColumn 8 10 16 Part Number 1934222-1 1934224-1 1934225-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling * * * Mates With 1934304-1, 1934303-1, 1934305-1, 1934306-1, 1934353-1, 1934354-1 1934311-1, 1934312-1, 1934313-1, 1934314-1 1934315-1, 1934318-1, 1934317-1, 1934316-1, 1934351-1, 1934352-1



A 1.90 Ref. [.075]

27.61 0.05 [1.087 .002]

15.30 Ref. [.602] 1.40 Ref. [.055]

18.10 0.08 [.713 .003] 20.20 0.10 [.795 .004]

Row A 2.20 Ref. [.087] Row A 1.70 Ref. [.067] 9.30 Ref. [.366]

1.40 Ref. [.055] 15.40 Ref. [.606] 11.00 Ref. [.433]

Finished Hole Size and Plated Through Holes* Connector Outline -X1.21 Ref. [.048]

Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A

1.40 Typ. [.055]

15.40 Ref. [.606]

1.50 Max. [.059] 8 1 -Y-

1.25 Ref. [.049] BSC

1.90 Typ. [.075] 0.80 Ref. [.031] B

BSC

Recommended PC Board Layout Daughterboard Component Side Shown Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202




3 Pair Right Angle Receptacle AssembliesColumn 8 10 16 Part Number 1934226-1 1934228-1 1934229-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling * * * Mates With 1934299-1, 1934300-1, 1934301-1, 1934302-1, 1934359-1, 1934360-1 1934339-1, 1934341-1, 1934340-1, 1934342-1, 1934357-1, 1934358-1 1934343-1, 1934344-1, 1934345-1, 1934346-1, 1934355-1, 1934356-1


23.41 0.05 [.922 .002] A 1.90 Ref. [.075] 13.90 0.08 [.547 .003] 16.00 0.10 [.630 .004] Row A

11.10 Ref. [.437] 1.40 Ref. [.055] 2.20 Ref. [.087]

Row A

1.70 Ref. [.067] 9.30 Ref. [.366]

1.40 Ref. [.055] 11.20 Ref. [.441] 11.00 Ref. [.433]

Finished Hole Size and Plated Through Holes* Connector Outline -X1.21 Ref. [.048]

Row I Row H Row G Row F Row E Row D Row C Row B Row A

11.20 1.40 Ref. Typ. [.441] [.055] 1.50 Max. [.059]

-Y1.25 Ref. [.049] BSC 1.90 Typ. [.075] 0.80 Ref. [.031] B BSC

Recommended PC Board Layout Daughterboard Component Side Shown

Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1.

*





4 Pair Vertical Receptacle AssembliesColumn 8 10 16 Part Number 1934593-1 1934544-1 1934594-1 Dimension A B 15.35 13.30 .605 .524 19.15 17.10 .754 .673 30.70 28.50 1.210 1.122 Application Tooling * * * Mates With 1934305-1, 1934303-1, 1934304-1, 1934306-1, 1934353-1, 1934354-1 1934311-1, 1934313-1, 1934314-1, 1934312-1 1934315-1, 1934317-1, 1934318-1, 1934316-1, 1934351-1, 1934352-1



A 1.90 Ref. [.075] 2.40 Ref. [.094]

1.40 Ref. [.055] 20.20 Ref. [.795] 18.10 Ref. [.713] 1.40 Ref. [.055] Row A 2.20 Ref. [.087] 15.40 Ref. [.606]

13.20 Ref. [.520]

Finished Hole Size and Plated Through Holes* Connector Profile BSC -Y-

Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A

2.40 Ref. [.094] 1.40 Typ. [.055] 15.40 Ref. [.606]

10

1 2.40 Ref. [.094] 0.80 Ref. [.031] BSC -X-

1.25 Ref. [.049]

1.90 Typ. [.075] B

Recommended PC Board Layout Component Side Shown

*Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202




6 Pair Vertical Header AssembliesColumn 8 10 16 Part Number 1934505-1 1934520-1 1934516-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling 2063383-1 2063383-2 2063383-3 Mates With 1934504-1 2065021-1 1934912-1

A 1.90 Ref. [.075] 1.425 Ref. [.056] Contact A1 6.00 0.15 Typ. [.236 .006]

4.50 0.15 [.177 .006] 2.50 Ref. [.098]

Contact A1 Indicator

2.40 Ref. [.094] 1.40 Ref. [.055]0.10 28.60 + 0.55

[1.126 .022 ]0.08 26.80 + 0.20 + .003 [1.055 .008 ]

+ .004

Connector Outline Finished Hole Size and Plated Through Holes*

11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]

-YBSC 8 1 2.40 Ref. [.094] 1.40 Typ. [.055] 23.80 Ref. [.937]

Row A Row B Row C Row D Row E Row F Row G Row H Row I Row J Row K Row L Row M Row N Row O Row P Row Q Row R

.625 Ref. [.025]

1.90 Typ. [.075] B -X-

1.425 Ref. [.056] BSC

2.40 Ref. [.094]

Recommended PC Board Layout Backplane Component Side Shown






6 Pair Vertical Header Assemblies Left End WallColumn 8 Part Number 1934513-1 Dimension A B 16.30 13.30 .642 .524 Application Tooling 2063383-1 Mates With 1934504-1

1Z-PACK TinMan High Speed, High Density Backplane Connector2.40 Ref. [.094] 1.40 Ref. [.055]

A 1.90 Ref. [.075]

W

2.375 Ref. [.094] Contact A1

6.00 0.15 [.236 .006]

4.50 0.15 [.177 .006] 2.50 Ref. [.098]

Contact A1 Indicator

0.10 28.60 + 0.55

[1.126 .022 ]0.08 26.80 + 0.20 + .003

+ .004

[1.055 .008 ]

W

11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]

Sec W-WConnector Outline Finished Hole Size and Plated Through Holes* BSC 8 Row A Row B Row C Row D Row E Row F Row G Row H Row I Row J Row K Row L Row M Row N Row O Row P Row Q Row R 1 2.40 Ref. [.094] 1.40 Typ. [.055] 23.80 Ref. [.937] -Y-

.625 Ref. [.025]

1.90 Typ. [.075] B

2.375 Ref. [.094] BSC -X-

2.40 Ref. [.094]







6 Pair Vertical Header Assemblies Right End WallColumn 8 Part Number 1934514-1 Dimension A B 17.60 13.30 .693 .524 Application Tooling 2063383-1 Mates With 1934504-1

A 1.90 Ref. [.075]

1.425 Ref. [.096] Contact A1

6.00 [.236

0.15 .006]

4.50 0.15 [.177 .006] 2.50 Ref. [.098]

2.40 Ref. [.094] Contact A1 Indicator 1.40 Ref. [.055]

0.10 28.60 + 0.55 + .004 [1.126 .022 ]

26.80 0.20

+ 0.08 + .003

[1.055 .008 ]

Connector Outline Finished Hole Size and Plated Through Holes*

11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]

-YBSC 8 1 2.40 Ref. [.094] 1.40 Typ. [.055] 23.80 Ref. [.937]

Row A Row B Row C Row D Row E Row F Row G Row H Row I Row J Row K Row L Row M Row N Row O Row P Row Q Row R

2.275 Ref. [.090]

1.90 Typ. [.075] B

1.425 Ref. [.056] BSC -X-

2.40 Ref. [.094]







6 Pair Vertical Header Assemblies Double End WallsColumn 8 10 16 Part Number 1934515-1 1934523-1 1934519-1 Dimension A B 17.95 13.30 .707 .524 21.75 17.10 .856 .673 33.15 28.50 1.305 1.122 Application Tooling 2063383-1 2063383-2 2063383-3 Mates With 1934504-1 2065021-1 1934912-1

1Z-PACK TinMan High Speed, High Density Backplane Connector2.50 Ref. [.098]

A 1.90 Ref. [.075]

W

2.375 Ref. [.094] Contact A1

6.00 0.15 [.236 .006]

4.50 0.15 [.177 .006]

2.40 Ref. [.094] Contact A1 Indicator 1.40 Ref. [.055]0.10 28.60 + 0.55

[1.126 .022 ]0.08 26.80 + 0.20 + .003 [1.055 .008 ]

+ .004

W

11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]

Sec W-WConnector Outline Finished Hole Size and Plated Through Holes* BSC 8 Row A Row B Row C Row D Row E Row F Row G Row H Row I Row J Row K Row L Row M Row N Row O Row P Row Q Row R 1 2.40 Ref. [.094] 1.40 Typ. [.055] 23.80 Ref. [.937] -Y-

2.275 Ref. [.090]

1.90 Typ. [.075] B

2.375 Ref. [.094] BSC -X-

2.40 Ref. [.094]

Recommended PC Board Layout Backplane Component Side Shown Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202

*




5 Pair Vertical Header AssembliesColumn 8 10 16 Part Number 1934269-1 1934325-1 1934331-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling* 1-1804791-1 1-1804791-7 1-1804791-3 Mates With 1934218-1 1934220-1 1934221-1

* Reference Application Specification 114-13202.4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006]

A 1.90 Ref. [.075] 1.425 Ref. [.056] Row A

2.50 Ref. [.098] 2.40 Ref. [.094]

1.40 Ref. [.055] 24.40 0.10 [.961 .004] 22.60 0.08 [.890 .003]

1.40 Ref. [.055]

2.38 Ref. [.094]

2.80 0.05 [.110 .002] 11.80 0.10 [.465 .004]

Finished Hole Size and Plated Through Holes* Connector Outline BSC -Y-

Row A Row B Row C Row D Row E Row F Row G Row H Row I Row J Row K Row L Row M Row N Row O

2.40 Ref. [.094] 1.40 Typ. [.055]

19.60 Ref. [.772]

1.90 Typ. [.075] .625 Ref. [.025] B -X-

2.40 Ref. [.094] 1.425 Ref. [.056] BSC

Recommended PC Board Layout Backplane Component Side Shown Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in press-fit connectors. Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1.

*




5 Pair Vertical Header Assemblies Left End WallColumn 8 16 Part Number 1934272-1 1934333-1 Dimension A B 16.30 13.30 .642 .524 31.50 28.50 1.240 1.122 Application Tooling* 1-1804791-1 1-1804791-3 Mates With 1934218-1 1934221-1



A 1.90 Ref. [.075]

1.40 Ref. [.055] 24.40 0.10 [.961 .004] 22.60 0.08 [.890 .003] 1.40 Ref. [.055]

Row A

2.38 Ref. [.094]

2.80 0.05 [.110 .002] 11.50 0.10 [.453 .004]



2.40 Ref. [.094] 1.40 Typ. [.055]

19.60 Ref. [.772]

1.90 Typ. [.075] 0.63 Ref. [.025] B

2.40 Ref. [.094] 2.38 Ref. [.094] BSC -X-

Recommended PC Board Layout Backplane Component Side Shown Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1.

*





5 Pair Vertical Header Assemblies Right End WallColumn 8 16 Part Number 1934273-1 1934334-1 Dimension A B 17.00 13.30 .669 .524 32.20 28.50 1.268 1.122 Application Tooling* 1-1804791-1 1-1804791-3 Mates With 1934218-1 1934221-1


A 1.90 Ref. [.075]

2.50 Ref. [.098] 2.40 Ref. [.094]

1.40 Ref. [.055] 24.40 0.10 [.961 .004] 22.60 0.08 [.890 .003] 1.40 Ref. [.055]

Row A 2.80 0.05 [.110 .002] 11.80 0.10 [.465 .004]

2.38 Ref. [.094]



2.40 Ref. [.094] 1.40 Typ. [.055]

19.60 Ref. [.772]

1.90 Typ. [.075] 2.27 Ref. [.089] B

2.40 Ref. [.094] 1.425 Ref. [.056] BSC -X-





5 Pair Vertical Header Assemblies Double End WallsColumn 8 10 16 Part Number 1934271-1 1934326-1 1934332-1 Dimension A B 17.95 13.30 .707 .524 21.75 17.10 .856 .673 33.15 28.50 1.305 1.122 Application Tooling* 1-1804791-1 1-1804791-7 1-1804791-3 Mates With 1934218-1 1934220-1 1934221-1


* Reference Application Specification 114-13202.4.50 0.15 [.177 .006] 1.90 Ref. [.075] 6.00 0.15 [.236 .006]

A

Row A 1.40 Ref. [.055] 24.40 0.10 [.961 .004] 22.60 0.08 [.890 .003]

1.40 Ref. [.055]

2.38 Ref. [.094]

2.80 0.05 [.110 .002] 11.80 0.10 [.465 .004]



2.40 Ref. [.094] 1.40 Typ. [.055]

19.60 Ref. [.772]

1.90 Typ. [.075] 2.275 Ref. [.089] B

2.40 Ref. [.094] 2.375 Ref. [.093] BSC -X-

Recommended PC Board Layout Backplane Component Side Shown Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in press-fit connectors. Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202



4 Pair Vertical Header AssembliesColumn 8 10 16 Part Number 1934305-1 1934311-1 1934315-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.202 1.122 Application Tooling* 1-1804790-1 1804790-5 1-1804790-3 Mates With 1934222-1 1934224-1 1934225-1


A

2.50 Ref. [.098] 2.40 Ref. [.094]

Row A0.10 20.20 + 0.55 + .004 [.795 .022 ] 0.08 18.40 + 0.20 + .003 [.724 .008 ]

1.40 Ref. [.055]

1.40 Ref. [.055]

1.90 Ref. [.075]

2.80 0.05 [.110 .002] 11.80 0.10 [.465 .004]


Row A Row B Row C Row D Row E Row F Row G Row H Row I Row J Row K Row L

2.40 Ref. [.094] 1.40 Typ. [.055] 15.40 Ref. [.606]

1.90 Typ. [.075] .625 Ref. [.025] B -X1.425 Ref. [.056] BSC

2.40 Ref. [.094]


*




4 Pair Vertical Header Assemblies Left End WallColumn 8 16 Part Number 1934303-1 1934317-1 Dimension A B 17.00 13.30 .669 .524 31.50 28.50 1.240 1.122 Application Tooling* 1-1804790-1 1-1804790-3 Mates With 1934222-1 1934225-1


* Reference Application Specification 114-13202.

A 2.375 Ref. [.094]

4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006]

0.10 20.20 + 0.55 + .004 [.795 .022 ] 0.08 18.40 + 0.20 + .003 [.724 .008 ]

1.40 Ref. [.055]

Row A 1.40 Ref. [.055] 1.90 Ref. [.075] 11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]



2.40 Ref. [.094] 1.40 Typ. [.055] 15.40 Ref. [.606]

1.90 Typ. [.075] .625 Ref. [.025] B -X-

2.40 Ref. [.094] 2.375 Ref. [.094] BSC





4 Pair Vertical Header Assemblies Right End WallColumn 8 16 Part Number 1934304-1 1934318-1 Dimension A B 16.30 13.30 .642 .524 32.20 28.50 1.268 1.122 Application Tooling* 1-1804790-1 1-1804790-3 Mates With 1934222-1 1934225-1


A 1.425 Ref. [.056]

4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006]

2.50 Ref. [.098] 2.40 Ref. [.094]

0.10 20.20 + 0.55 + .004 [.795 .022 ] 0.08 18.40 + 0.20 + .003 [.724 .008 ]

1.40 Ref. [.055]

Row A 1.40 Ref. [.055] 11.80 0.10 [.465 .004] 2.80 0.05 [.110 .002]

1.90 Ref. [.075]



2.40 Ref. [.094] 1.40 Typ. [.055] 15.40 Ref. [.606]

1.90 Typ. [.075] 2.275 Ref. [.090] B -X-

2.40 Ref. [.094] 1.425 Ref. [.056] BSC





4 Pair Vertical Header Assemblies Double End WallsColumn 8 10 16 Part Number 1934306-1 1934312-1 1934316-1 Dimension A B 17.95 13.30 .707 .524 21.75 17.10 .856 .673 33.15 28.50 1.305 1.122 Application Tooling* 1-1804790-1 1804790-5 1-1804790-3 Mates With 1934222-1 1934224-1 1934225-1



A

Row A0.10 20.20 + 0.55 + .004 [.795 .022 ] 0.08 18.40 + 0.20 + .003 [.724 .008 ]

1.40 Ref. [.055]

1.40 Ref. [.055]

1.90 Ref. [.075]

2.80 0.05 [.110 .002] 11.80 0.10 [.465 .004]



2.40 Ref. [.094] 1.40 Typ. [.055] 15.40 Ref. [.606]

1.90 Typ. [.075] 2.275 Ref. [.090] B -X-

2.40 Ref. [.094] 2.375 Ref. [.094] BSC


*




3 Pair Vertical Header AssembliesColumn 8 10 16 Part Number 1934299-1 1934339-1 1934343-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling* 1-1901457-1 1-1901457-2 1-1901457-3 Mates With 1934226-1 1934228-1 1934229-1


A 1.425 Ref. [.056] 2.50 Ref. [.098] 2.40 Ref. [.094]

Row A 1.40 Ref. [.055]

0.10 16.00 + 0.55 + .004 [.630 .022 ] 0.08 14.20 + 0.20 + .003 [.559 .008 ]

1.40 Typ. [.055] Ref.

1.90 Ref. [.075]

4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006] 11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]

Finished Hole Size and Plated Through Holes* Connector Outline 2.40 Ref. BSC [.094] -YRow A Row B Row C Row D Row E Row F Row G Row H Row I

-X-

1.40 Typ. [.055]

11.20 Ref. [.441]

1.90 Typ. [.075] 0.625 Ref. [.025] B

2.40 Ref. [.094] 1.425 Ref. [.056] BSC







3 Pair Vertical Header Assemblies Left End WallColumn 8 10 16 Part Number 1934300-1 1934340-1 1934344-1 Dimension A B 16.30 13.30 .642 .524 20.10 17.10 .791 .673 31.50 28.50 1.240 1.122 Application Tooling* 1-1901457-1 1-1901457-2 1-1901457-3 Mates With 1934226-1 1934228-1 1934229-1



A 2.375 Ref. [.094] 2.50 Ref. [.098] 2.40 Ref. [.094]

0.10 16.00 + 0.55 + .004 [.630 .022 ] 0.08 14.20 + 0.20 + .003 [.559 .008 ]

1.40 Typ. [.055] Ref.

Row A 1.90 Ref. [.075] 1.40 Ref. [.055] 4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006] 11.80 0.10 [.465 .004] 2.80 0.05 [.110 .002]


-X-

1.40 Typ. [.055]

11.20 Ref. [.441]

0.625 Ref. [.025]

1.90 Typ. [.075]

2.40 Ref. [.094] 2.375 Ref. [.094] BSC

B







3 Pair Vertical Header Assemblies Right End WallColumn 8 10 16 Part Number 1934301-1 1934341-1 1934345-1 Dimension A B 17.00 13.30 .669 .524 20.08 17.10 .791 .673 32.20 28.50 1.268 1.122 Application Tooling* 1-1901457-1 1-1901457-2 1-1901457-3 Mates With 1934226-1 1934228-1 1934229-1


A 1.425 Ref. [.056] 2.50 Ref. [.098] 2.40 Ref. [.094]

0.10 16.00 + 0.55 + .004 [.630 .022 ] 0.08 14.20 + 0.20 + .003 [.559 .008 ]

1.40 Typ. [.055] Ref.

Row A 1.90 Ref. [.075] 1.40 Ref. [.055] 4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006] 11.80 0.10 [.465 .004] 2.80 0.05 [.110 .002]


-X-

1.40 Typ. [.055]

11.20 Ref. [.441]

2.275 Ref. [.090]

1.90 Typ. [.075]

2.40 Ref. [.094] 1.425 Ref. [.056] BSC

B







3 Pair Vertical Header Assemblies Double End WallsColumn 8 10 16 Part Number 1934302-1 1934342-1 1934346-1 Dimension A B 17.95 13.30 .707 .524 21.75 17.10 .856 .673 33.15 28.50 1.305 1.122 Application Tooling* 1-1901457-1 1-1901457-2 1-1901457-3 Mates With 1934226-1 1934228-1 1934229-1



A 2.375 Ref. [.094] 2.50 Ref. [.098] 2.40 Ref. [.094]

Row A 1.40 Ref. [.055]

0.10 16.00 + 0.55 + .004 [.630 .022 ] 0.08 14.20 + 0.20 + .003 [.559 .008 ]

1.40 Typ. [.055] Ref.

1.90 Ref. [.075]

4.50 0.15 [.177 .006] 6.00 0.15 [.236 .006] 11.80 0.10 [.465 .004]

2.80 0.05 [.110 .002]


-X-

1.40 Typ. [.055]

11.20 Ref. [.441]

2.275 Ref. [.090]

1.90 Typ. [.075]

2.40 Ref. [.094] 2.375 Ref. [.094] BSC

B







5 Pair Right Angle Pin Header AssembliesColumn 8 16 Part Number 1934349-1 1934347-1 Dimension A B 15.35 13.30 .604 .524 30.55 28.50 1.203 1.122 Application Tooling * * Mates With 1934218-1 1934221-1

* Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13202.A 1.90 Ref. [.075] 0.625 Ref. [.025] 27.61 0.05 [1.087 .002]

19.50 Ref. [.768]

0.10 24.40 + 0.55 + .004 [.961 .022 ] 0.08 22.60 + 0.20 + .003 [.890 .008 ]

1.40 Ref. [.055] Row A 2.20 0.15 [.087 .006] 1.40 Ref. [.055]

Row A

4.50 Ref. [.177] 6.00 Ref. [.236]

1.70 Ref. [.067] 19.60 Ref. [.772] 6.80 Ref. [.268]

9.00 0.13 [.354 .005]

Finished Hole Size and Plated Through Holes* Connector Outline 1.21 Ref. [.048]

-XRow O Row N Row M Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.95 Ref. [.077] 0.90 Ref. [.035] 1.15 Ref. [.045] BSC B 1.90 Typ. [.075]

1.40 Typ. [.055]

19.60 Ref. [.772]

1.50 Max. [.059] 1 8

-Y0.90 Ref. [.035] BSC 15.80 Ref. [.622]

Recommended PC Board Layout Component Side Shown Note: For additional information on pcb routing guidelines, reference the Z-PACK TinMan Connector Routing Guide Report #27GC001-1. * Finished Hole Diameter = 0.46 0.05 [.018 .002] Drilled Hole Diameter = 0.55 0.02 [.022 .001] Copper Thickness = 0.038 0.013 [.0015 .0005] Tin-Lead Thickness = 0.008 0.004 [.0003 .0002] Finishes other than Tin-Lead, See Appl. Spec. 114-13202

*




5 Pair Right Angle Pin Header Assemblies Double End WallsColumn 8 16 Part Number 1934350-1 1934348-1 Dimension A B 18.05 13.30 .711 .524 33.25 28.50 1.309 1.122 Application Tooling * * Mates With 1934218-1 1934221-1



A 1.90 Ref. [.075] 2.375 Ref. [.094]

27.61 0.05 [1.087 .002]

19.50 Ref. [.768]

0.10 24.40 + 0.55 + .004 [.961 .022 ] 0.08 22.60 + 0.20 + .003 [.890 .008 ]

1.40 Ref. [.055] Row A 2.20 0.15 [.087 .006] 1.40 Ref. [.055]

Row A

4.50 Ref. [.177] 6.00 Ref. [.236]

1.70 Ref. [.067] 19.60 Ref. [.772] 6.80 Ref. [.268]

9.00 0.13 [.354 .005]

Finished Hole Size and Plated Through Holes* Connector Outline 1.21 Ref. [.048]

-XRow O Row N Row M Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.95 Ref. [.077] 0.90 Ref. [.035] 2.10 Ref. [.083] BSC 1.90 Typ. [.075]

1.40 Typ. [.055]

19.60 Ref. [.772]

1.50 Max. [.059] 1 8

-Y0.90 Ref. [.035] 2.65 Ref. [.104] BSC 15.80 Ref. [.622]

B





4 Pair Right Angle Pin Header AssembliesColumn 8 16 Part Number 1934353-1 1934351-1 Dimension A B 15.35 13.30 .604 .524 30.55 28.50 1.203 1.122 Application Tooling * * Mates With 1934222-1 1934225-1


A 1.90 Ref. [.075] 0.625 Ref. [.025]

24.00 0.05 [.945 .002]

15.30 Ref. [.602] 1.40 Ref. [.055] Row A 2.20 0.15 [.087 .006] 1.40 Ref. [.055]

0.10 20.20 + 0.55 + .004 [.795 .022 ] 0.08 18.40 + 0.20 + .003 [.724 .008 ]

Row A

4.50 Ref. [.177] 6.00 Ref. [.236]

1.70 Ref. [.067] 15.40 Ref. [.606] 6.80 Ref. [.268]

9.00 0.13 [.354 .005]

Finished Hole Size and Plated Through Holes* Connector Outline -X1.80 Ref. [.071] Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.95 Ref. [.077] 0.90 Ref. [.035] 1.15 Ref. [.045] BSC B 1.90 Typ. [.075] 0.90 Ref. [.035] BSC 15.80 Ref. [.622]

1.40 Typ. [.055]

15.40 Ref. [.606]

1.50 Max. [.059] 1 8

-Y-





4 Pair Right Angle Pin Header Assemblies Double End WallsColumn 8 16 Part Number 1934354-1 1934352-1 Dimension A B 18.05 13.30 .711 .524 33.25 28.50 1.309 1.122 Application Tooling * * Mates With 1934222-1 1934225-1



A 1.90 Ref. [.075] 2.375 Ref. [.094]

24.00 0.05 [.945 .002]

15.30 Ref. [.602] 1.40 Ref. [.055] Row A 2.20 0.15 [.087 .006] 1.40 Ref. [.055]

0.10 20.20 + 0.55 + .004 [.795 .022 ] 0.08 18.40 + 0.20 + .003 [.724 .008 ]

Row A

4.50 Ref. [.177] 6.00 Ref. [.236]

1.70 Ref. [.067] 15.40 Ref. [.606] 6.80 Ref. [.268]

9.00 0.13 [.354 .005]

Finished Hole Size and Plated Through Holes* Connector Outline -X1.80 Ref. [.071] Row L Row K Row J Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.95 Ref. [.077] 0.90 Ref. [.035] 2.10 Ref. [.083] BSC B 1.90 Typ. [.075] 0.90 Ref. [.035] 2.65 Ref. [.104] BSC 15.80 Ref. [.622]

1.40 Typ. [.055]

15.40 Ref. [.606]

1.50 Max. [.059] 1 8

-Y-





3 Pair Right Angle Pin Header AssembliesColumn 8 10 16 Part Number 1934359-1 1934357-1 1934355-1 Dimension A B 15.35 13.30 .604 .524 19.15 17.10 .754 .673 30.55 28.50 1.203 1.122 Application Tooling * * * Mates With 1934226-1 1934228-1 1934229-1


A 1.90 Ref. [.075] 0.625 Ref. [.025] 11.10 Ref. [.437] 1.40 Ref. [.055] Row A 2.20 0.15 [.087 .006] 1.40 Ref. [.055] 19.80 0.05 [.780 .002]

0.10 16.00 + 0.55 + .004 [.630 .022 ] 0.08 14.20 + 0.20 + .003 [.559 .008 ]

Row A

4.50 Ref. [.177] 6.00 Ref. [.236] 9.00 0.13 [.354 .005]

1.70 Ref. [.067] 11.20 Ref. [.441] 6.80 Ref. [.268]

Finished Hole Size and Plated Through Holes* -XConnector Outline 1.80 Ref. [.071] Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.95 Ref. [.077] 0.90 Ref. [.035] 1.15 Ref. [.045] BSC 1.90 Typ. [.075] 0.90 Ref. [.035] BSC 15.80 Ref. [.622]

1.40 Typ. [.055]

11.20 Ref. [.441] 1.50 Max. [.059]

1

8

-Y-

B







3 Pair Right Angle Pin Header Assemblies Double End WallsColumn 8 10 16 Part Number 1934360-1 1934358-1 1934356-1 Dimension A B 18.05 13.30 .711 .524 21.85 17.10 .860 .673 33.25 28.50 1.309 1.122 Application Tooling * * * Mates With 1934226-1 1934228-1 1934229-1



A 1.90 Ref. [.075] 2.375 Ref. [.094] 11.10 Ref. [.437] 1.40 Ref. [.055] Row A 2.20 0.15 [.087 .006] 1.40 Ref. [.055] 19.80 0.05 [.780 .002]

0.10 16.00 + 0.55 + .004 [.630 .022 ] 0.08 14.20 + 0.20 + .003 [.559 .008 ]

Row A

4.50 Ref. [.177] 6.00 Ref. [.236] 9.00 0.13 [.354 .005]

1.70 Ref. [.067] 11.20 Ref. [.441] 6.80 Ref. [.268]

Finished Hole Size and Plated Through Holes* -XConnector Outline 1.80 Ref. [.071] Row I Row H Row G Row F Row E Row D Row C Row B Row A 1.95 Ref. [.077] 0.90 Ref. [.035] 2.10 Ref. [.083] BSC 1.90 Typ. [.075] BSC 0.90 Ref. [.035] 2.65 Ref. [.104] 15.80 Ref. [.622]

1.40 Typ. 11.20 [.055] Ref. [.441] 1.50 Max. [.059] 1 8

-Y-

B







Z-PACK TinMan Midplane (Orthogonal) Connector OverviewProduct FactsI I

Scalable to 25 Gbps 100 ohm impedance for differential pair configuration Very low noise Outstanding insertion loss through 2 connectors and vias Skewless differential pair in a 2-connector system Utilizes the same header and receptacle part on both sides of the midplane Compatible with standard Z-PACK TinMan connectors and accessories 4 pair x 4 pair and 6 pair x 6 pair modules available Reliable, redundant contact design on all contacts Reliable press-fit style termination to PCB RoHS compliant

I I

I

I

I

I

I

I

The Z-PACK TinMan midplane (orthogonal) connector is an extension of the Z-PACK TinMan connector product line, which includes perpendicular and coplanar interconnect solutions in 3 pair, 4 pair, and 5 pair versions. This connector system is commonly referred to as an orthogonal connector system due to the orthogonal (perpendicular) orientation of the two system boards being connected on the front and rear side. It is built on the same technology and design approach as standard Z-PACK TinMan connectors with the same mating interface and leadframe geometry. Superior electrical performance is achieved for several reasons. The front board to

I

ApplicationsThe Z-PACK TinMan midplane (orthogonal) connector is ideally designed for very demanding applications involving data rates in excess of 10 Gbps with many interconnections required. Such applications would include the following Telecom/Datacom equipment:I I I I

Switches Servers Routers Storage

rear board connection through the midplane makes the plated through hole (PTH) part of the signal transmission path eliminating the detrimental effects of via stubs. This construction also eliminates the need to route all the high speed signal lines along the backplane minimizing signal loss and significantly improving signal throughput. The wide column spacing establishes a connector footprint with improved impedance and reduced electrical noise. The in-line footprint version also provides ease of trace routing with wide channels and a connector interface compatible with the orthogonal receptacle. This permits the use of the same daughtercard in both midplane and backplane configurations.

The benefits are not limited to just signal integrity performance. The thinner midplane with fewer layers and significantly less complex routing is inherently less expensive. With trace routing typically limited to power distribution, low speed lines and potentially very few high speed links, the board can be fabricated from a cost effective material without the need to utilize techniques such as counter-boring or backdrilling. All of this permits the implementation of small to large scale full mesh interconnects with significantly reduced complexity at a lower cost and with improved signal integrity.

For additional information visit: http://www.te.com/zpacktinman 36Catalog 1773095 Revised 4-12 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change.

6x6 (36 signal pairs)

Dimensions are in millimeters and inches unless otherwise specified. USA: +1 (800) 522-6752

Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999

UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015


Z-PACK TinMan Midplane (6 x 12 Orthogonal) Connector OverviewNoise TableI Pair AB BC DE EF GH HI JK KL MN NO PQ QR Total Peak 1.2% N/A 2.5% 2.4% 2.5% 2.7% 2.8% 2.8% 3.0% 2.9% 2.3% 1.4%

Maximum, multiple source crosstalk


Technical DocumentsProduct Specification 108-2303 Application Specification 114-13202 Routing Guide Report #27GC002

Material and FinishSignal Contact High Strength Copper Alloy Ground Contact High Strength Copper Alloy Housing Liquid Crystal Polymer, UL 94V-0 Rated Platings Telcordia compliant interface, Nickel underplate Compliant Pin Plating RoHS Compliant

RatingsTemperature Range -65C to +90C Current Rating 0.5 A/contact @ < 30C T-Rise Durability 200 cycles Dielectric Withstanding Voltage 560 VAC Operating Voltage 250 VAC max.

Signal IntegrityCharacteristic Impedance Differential @ 100 ohms 10% Crosstalk Multi-pair differential crosstalk: 1.0% @ 50ps Insertion Loss -2 dB @ 10 GHz

Insertion Loss Plot

TELCORDIA is a trademark of Telcordia Technologies, Inc.

37Catalog 1773095 Revised 4-12 www.te.com Dimensions are

Backplane connector

Documents

Transcript of Backplane connector