B-Tech (Mechanical Engineering) Revised Curriculum - 2016
Transcript of B-Tech (Mechanical Engineering) Revised Curriculum - 2016
B-Tech (Mechanical Engineering) Revised Curriculum - 2016
SEMESTER I L T P C SEMESTER II L T P C
CE111 Engineering Drawing 1 0 3 5 1 CB102
and CE102
Biology and Environmental Studies 3 0 0 6
EE101 Electrical Sciences 3 1 0 8 2 CH103 Introductory Chemistry 3 1 0 8 HS103 Communicative English for Engineers 2 0.5 1 6 3 CH110 Chemistry Laboratory 0 0 3 3 MA101 Mathematics – I 3 1 0 8 4 CS102 Programming and Data Structures 3 0 0 6 ME110 Workshop – I 0 0 3 3 5 CS112 Programming and Data Structures Laboratory 0 0 3 3 PH103 Physics – I 3 1 0 8 6 EE103 Basic Electronics Laboratory 0 0 3 3 PH110 Physics Laboratory 0 0 3 3 7 MA102 Mathematics-II 3 1 0 8
8 ME102 Engineering Mechanics 3 1 0 8
TOTAL 12 3.5 10 41 TOTAL 15 3 9 45
SEMESTER III SEMESTER IV
MA201 Mathematics – III 3 1 0 8 1 HS2XX HSS Elective – II 3 0 0 6 HS2XX HSS Elective – I 3 0 0 6 2 XX2XX Open Elective I 3 0 0 6 ME207 Dynamics 3 0 0 6 3 ME208 Kinematics and Dynamics of Mechanisms 3 0 2 8 ME209 Thermodynamics 3 1 0 8 4 ME214 Mechanics of Solids 3 0 0 6 ME231 Engineering Materials 3 0 2 8 5 ME216 Fluid Mechanics 3 0 2 8
6 ME292 Measurement Laboratory 0 0 2 2
TOTAL 15 2 2 36 TOTAL 15 0 6 36
SEMESTER V SEMESTER VI
XX3XX Open Elective – I 3 0 0 6 1 HS3XX HSS Elective – III 3 0 0 6 ME313 Design of Machine Elements 3 0 3 9 2 ME312 System Dynamics and Control 3 0 2 8 ME315 Heat and Mass Transfer 3 0 2 8 3 ME314 Applied Thermodynamics 3 0 2 8 ME331 Manufacturing Technology I 3 0 0 6 4 ME332 Manufacturing Technology II 3 0 3 9 ME393 Engineering Software Laboratory 1 0 3 5 5 ME396 Engineering Practicum-II 0 0 3 3 ME395 Engineering Practicum-I 0 0 3 3
TOTAL 13 0 11 37 TOTAL 12 0 10 34
SEMESTER VII SEMESTER VIII
XX4XX Open Elective – III 3 0 0 6
ME431 Industrial Engineering and Operations Research 3 0 0 6 1 MEXXX Departmental Elective-III 3 0 0 6 MEXXX Departmental Elective-I 3 0 0 6 2 MEXXX Departmental Elective-IV 3 0 0 6 MEXXX Departmental Elective – II 3 0 0 6 3 ME496 Project - II 0 0 18 18 ME495 Project-I 0 0 6 6
TOTAL 12 0 6 30 TOTAL 6 0 18 30
Grand Total 100 8.5 72 289
Page 1
List of Electives:
• Electives I-II
A student should select two courses from three different groups. If there is no appropriate course in the department,
he can choose course from other department.
Group
A
ME503: Computational Fluid Dynamics
ME504: Vehicle Dynamics and Multi-body Systems
Group
B
ME512: Mobile Robotics
ME533: Finite Element Analysis
ME535: Acoustics
Group
C
ME501: Robotics: Advanced Concepts & Analysis
ME581: Bio Mechanics and Bio Mechatronics
ME537: Refrigeration and Air-Conditioning
• Electives III-IV
A student should select two courses from three different groups. If there is no appropriate course in the department,
he can choose course from other department.
Group A ME502: Industrial Automation
ME510: Robot Motion Planning
ME542: Aerodynamics
ME544:Composite Materials: Mechanics, Processing and Testing
ME546: Multiphase Flow & Heat Transfer Applications
Group B ME547: Laser Material Processing
ME552: Fracture and Fatigue
ME567: Microfluidics and Microsystems
Group C ME541: Turbulent Shear Flow
ME536: Non-linear Systems Dynamics
ME554: Rotor Dynamics
ME534: Wear & Lubrication of Machine Components
ME506: Computer Numerical Controlled Machine Tools
ME101 Workshop L-T-P-C: 0-0-3-3
Pre-requisites: Nil
Syllabus:
Sheet Metal Working:
Sheet material: GI sheets, aluminium, tin plate, copper, brass etc; Tools: steel rule, vernier
calipers, micrometer, sheet metal gauge, scriber, divider, punches, chisels, hammers,
snips, pliers, stakes etc.; operations: scribing, bending, shearing, punching etc; Product
development: hexagonal box with cap, funnel etc.
Pattern Making and Foundry Practice:
Pattern material: wood, cast iron, brass, aluminium, waxes etc.; Types of patterns: split,
single piece, match plate etc; Tools: cope, drag, core, core prints, shovel, riddle, rammer,
trowel, slick, lifter, sprue pin, bellow, mallet, vent rod, furnace etc. Moulding sands: green
sand, dry sand, loam sand, facing sand etc., Sand casting: Sand preparation, mould
making, melting, pouring, and cleaning.
Joining:
Classifications of joining processes; Introduction to Arc welding processes; power source;
electrodes; edge preparation by using tools bench vice, chisels, flat file, square file, half
round file, round file, knife edge file, scrapers, hacksaws, try squares; cleaning of job, Job:
lap and butt joints using manual arc welding.
Machining centre:
Introduction to different machine tools; Working principle of lathe, milling, drilling etc.;
Setting and preparation of job using lathe and milling; Performing different operations
namely, straight turning, taper turning, knurling, thread cutting etc.; Introduction to
dividing head, indexing, Performing operation in milling using indexing mechanism.
CNC centre:
Introduction to CNC machines; Fundamentals of CNC programming using G and M code;
setting and operations of job using CNC lathe and milling, tool reference, work reference,
tool offset, tool radius compensation. Text and Reference books:
1. Hajra Choudhury, HazraChoudhary and Nirjhar Roy, 2007, Elements of Workshop
Technology, vol. I,Mediapromoters and Publishers Pvt. Ltd. 2. W A J Chapman, Workshop Technology, 1998, Part -1, 1st South Asian Edition, Viva
Book Pvt Ltd. 3. P.N. Rao, 2009, Manufacturing Technology, Vol.1, 3rd Ed., Tata McGraw Hill Publishing
Company. 4. B.S. Pabla, M.Adithan, 2012, CNC machines
ME102 Engineering Mechanics L-T-P-C: 3-1-0-8
Course Objectives: The objective of this first course in mechanics is to enable
engineering students to analyze basic mechanics problems and apply vector based
approach to solve them.
Expected learning outcomes: Following learning outcomes are expected after going
through this course.
a) Learn and apply general mathematical and computer skills to solve basic
mechanics problems.
b) Apply the vector based approach to solve mechanics problems. Pre-requisite: Nil
Syllabus:
1. Rigid body statics: Equivalent force system. Equations of equilibrium, Free body
diagram, Reaction, Static indeterminacy.
2. Structures: 2D truss, Method of joints, Method of section. Beam, Frame, types of
loading and supports, axial force, Bending moment, Shear force and Torque
Diagrams for a member:
3. Friction: Dry friction (static and kinetic), wedge friction, disk friction (thrust bearing),
belt friction, square threaded screw, journal bearings, Wheel friction, Rolling
resistance.
4. Centroid and Moment of Inertia
5. Virtual work and Energy method: Virtual Displacement, principle of virtual work,
mechanical efficiency, work of a force/couple (springs etc.), Potential Energy and
equilibrium, stability.
6. Introduction to stress and strain: Definition of Stress, Normal and shear Stress.
Relation between stress and strain, Cauchy formula.
7. Stress in an axially loaded member,
8. Stresses due to pure bending,
9. Complementary shear stress,
10.Stresses due to torsion in axi-symmetric sections :
11.Two dimension state of stress, Mohr’s circle representation, Principal stresses and
strains. Texts/References:
1. I. H. Shames, Engineering Mechanics: Statics and dynamics, 4th Ed, PHI, 2002. 2. F. P. Beer and E. R. Johnston, Vector Mechanics for Engineers, Vol I - Statics, 3rd Ed, Tata
McGraw Hill, 2000. 3. J. L. Meriam and L. G. Kraige, Engineering Mechanics, Vol I - Statics, 5th Ed, John Wiley, 2002.
4. E.P. Popov, Engineering Mechanics of Solids, 2nd Ed, PHI, 1998.
5. F. P. Beer and E. R. Johnston, J.T. Dewolf, and D.F. Mazurek, Mechanics of Materials, 6th Ed,
McGraw Hill Education (India) Pvt. Ltd., 2012. ME207 Dynamics L-T-P-C: 3-0-0-6
Course Objectives: The objective of this course is to introduce students to the
fundamental principles and methods of dynamics. Students will be introduced to specific
problems on modelling of engineering systems using principles of dynamics. Some of the
exercise problems will be solved using computer based programs.
Expected learning outcomes: Following learning outcomes are expected after going
through this course.
a) Learn and apply general mathematical and computer skills to solve dynamics
problems.
b) Application of Newton’s laws of motion, work energy principles, and momentum
conservation principles in various coordinate systems for single particles, system
of particles, and rigid bodies.
c) Introductory understanding of vibration of simple mechanical systems. Pre-
requisites: Nil
Syllabus:
1. Kinematics of Particles: Rectilinear motion, curvilinear motion rectangular, normal-
tangential, polar, cylindrical, spherical (coordinates), relative and constrained
motion, space curvilinear motion.
2. Kinetics of Particles: Force, mass and acceleration, work and energy, impulse and
momentum, impact. Introduction to central force motion.
3. Kinetics of a system of particles,
4. Center of Gravity and Moment of Inertia: First and second moment of mass, radius
of gyration, parallel axis theorem, product of inertia, rotation of axes and principal
moment of inertia, Thin plates, composite bodies.
5. potential energy, impulse-momentum and associated conservation principles,
Euler equations of motion and its application.
6. Introduction to Variational principles, Lagrange’s equation, Hamilton’s principle.
7. Equation of motion in Eulerian angles.
8. Vibration of a single spring-mass-dashpot system: Free and forced vibration,
damping resonance, magnification factor, amplitude and phase plot for a
harmonically excited single degree of freedom system.
Texts/References 1. I. H. Shames, Engineering Mechanics: Statics and dynamics, 4th Ed, PHI, 2002. 2. F. P. Beer and E. R. Johnston, Vector Mechanics for Engineers, Vol II - Dynamics, 3rd Ed, Tata
McGraw Hill, 2000. 3. J. L. Meriam and L. G. Kraige, Engineering Mechanics, Vol II - Dynamics, 5th Ed, John Wiley,
2002. 4. L. Meirovitch, Methods of analytical dynamics, Dover Publication, 2007.
5. planner motion and general three-dimensional motion, work energy, power,
Kinematics and Kinetics of Rigid Bodies: Translation, fixed axis rotation, general
ME209 Thermodynamics L-T-P-C: 3-1- 0-8
Pre-requisites: Nil
Course objectives: a) To develop the basic understanding of classical thermodynamics and principles of
engineering applications b) To develop skills to formulate and analyze thermodynamic problems involving control
volumes and control masses
Proposed Course Content Thermodynamic systems: Macroscopic and microscopic view, system and control volume,
states and properties, processes; Properties of pure substances and steam: Phase changes,
steam tables and Mollier diagram, Heat and work; Zeroth law; First law: for systems and control
volumes, enthalpy, Applications of first law: closed and open systems, SSSF, USUF, Reactive
systems and Combustion; Second law: Carnot cycle, entropy, corollaries of the second law;
Applications of second law: closed and open systems, vapor compression and Rankine cycle;
irreversibility , availability, exergy; Thermodynamic relations; Properties of mixtures of ideal
gases; Third law of thermodynamics; Thermodynamic cycles - Otto, Diesel, dual and Joule,
Introduction to psychrometry
Text and Reference Books: 1. C Borgnakke& R E Sonntag, Fundamentals of Thermodynamics7e, John Wiley, 2009. 2. Y. A. Cengel and M. A. Boles, Thermodynamics, An Engineering Approach, 4e, Tata McGraw Hill,
2003. 3. G F C Rogers and Y R Mayhew, Engineering ThermodynamicsWork and Heat Transfer 4e,
Pearson 2003. 4. J P Howell and P O Buckius, Fundamentals of Engineering Thermodynamics, McGraw Hill, 1987.
Main differences between the proposed and the existing courses:
1. Inclusion: a. All the topic of the existing Thermodynamics (ME205) course b. Thermodynamics of reactive systems and combustion c. Mixture of ideal gases d. Vapor compression cycle e. Psychometry
ME214 Mechanics of Solids L-T-P-C: 3-0-0-6
Course Objectives: The objective of this course is to introduce students to the advanced
principles and methods of solid mechanics. Design exercises help students to apply
theoretical knowledge to practical problems.
Expected learning outcomes: Following learning outcomes are expected after going
through this course.
a) Learn and apply general mathematical and computer skills to solve structural
mechanics problems.
b) Introduction to tensors.
Pre-requisites: Engineering Mechanics (ME102)
Syllabus:
1. Stress as a tensor: stress at point, Cauchy stress tensor, equilibrium equations,
analysis of deformation and definition of strain components, compatibility relations:
One-to-one deformation mapping, invertiblity of deformation gradient, Compatibility
condition.
2. Constitutive relations, Theory of failures for isotropic materials.
3. Some properties of Stress and Strain Tensor: Principal stresses and strains, stress
and strain invariants. Uniqueness of solution. Plane stress and plane strain
problems,Airy's stress function.
4. 2-D problems in polar coordinates: Thin and thick walled cylinder, Rotating disks
and cylinders.
5. Torsion of non-circular bars: Saint Venant's semi-inverse method, Prandtl stress
function. Elliptical and triangular shaft, shaft with cutout, rectangular shaft, hollow
shafts, thin tubes narrow rectangular shaft. Membrane analogy.
6. Advanced problem in beam bending: Unsymmetrical bending: pure bending of
prismatic and composite beams. Curved beam. Bending of beam with thin profile
section - shear flow, determination of shear center.
7. Elastic stability: Buckling of mechanisms, Buckling of straight and bent
beamcolumns.
8. Energy Methods: Strain energy due to axial, torsion, bending and transverse shear.
Comparison of strain energies due to bending and shear. Castigliano’s theorem,
reciprocity theorem etc.
9. Contact Stresses: Geometry of contact surface, methods of computing contact
stress, deflection of bodies in point contact and line contact with normal load.
10.Stress Concentration: Plate with circular hole.
11.Introduction to plate theory (Kirchhoff's theory).
Texts/References: rd 1. S. Timoshenko, Strength of Materials – Parts I and Part II, 3 Ed., CBS Publishers and
Distributers, 2004. 2. L.S. Srinath, Advanced Mechanics of Solids, Tata McGraw Hill, 2009. 3. E.P. Popov, Engineering Mechanics of Solids, 2nd Ed, PHI, 1998.
4. F. P. Beer and E. R. Johnston, J.T. Dewolf, and D.F. Mazurek, Mechanics of Materials, 6th Ed,
McGraw Hill Education (India) Pvt. Ltd., 2012. 5. Y.C. Fung, Foundations of Solid Mechanics, Prentice-Hall, 1965. 6. S. C. Crandall, N. C. Dahl, and T. J. Lardner, An Introduction to the Mechanics of Solids, 2e,
McGraw Hill, 1999.
7. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity, 3e, McGraw Hill International, 1970.
ME208 Kinematics and Dynamics of Mechanisms L-T-P-C: 3-0-
2-8
Course Objectives: The objectives of this course are to cover the kinematics and
dynamics of planar single degree-of-freedom mechanisms. Specifically, this course will
introduce students to the graphical and analytical techniques used for analysis and design
of planar mechanism. A semester long course project will be assigned to enable students
to apply learned theoretical concepts to real life problems. A side objective of this course
will be to introduce Matlab as a computer tool to solve analysis equations.
Expected learning outcomes: Following learning outcomes are expected after going
through this course.
a) Learn and apply general mathematical and computer skills to kinematics and
dynamics analysis of machine elements including linkages, cams, and gears, within
the general machine design context.
b) Apply the theoretical principles to a real life problem using computer tools.
c) Application of MATLAB software to solve kinematics and dynamics problems. Pre-
requisites:Dynamics(ME201)
Syllabus:
Sr. Topics
No.
1 Introduction and course policies
2 Degrees of freedom, elements of kinematic chains, Kutzbach, Gruebler,
Grashof’s criterion
3 Graphical method of kinematic (displacement, velocity and acceleration) analysis
of planar mechanisms
4 Analytical and computer-aided method of kinematic analysis of planar and spatial
mechanisms
5 Synthesis of mechanisms
6 Special mechanisms: steering, Hooke’s joint
7 Introduction to Cams, classification, terminology of Cams, Design and
synthesis of cams by analytical and graphical methods
8 Different gear trains, applications of gears in gear boxes
9 Static and dynamic force analysis, friction in joints
Texts/References 1. J. E. Shighley and J.J. Uicker, Theory of Machines and Mechanisms, McGraw Hill, 1995 2. A. K. Mallik, A. Ghosh, G. Dittrich, Kinematic analysis and synthesis of Mechanisms, CRC, 1994. 3. A. G. Erdman and G. N. Sandor, Mechanism Design, Analysis and Synthesis Volume 1, PHI,
Inc., 1997. 4. J. S. Rao and R. V. Dukkipati, Mechanism and Machine Theory, New Age International, 1992. 5. S. S. Rattan, Theory of Machines, Tata McGraw Hill, 1993. 6. T. Bevan. Theory of Machines, CBS Publishers and Distributors, 1984
ME216 Fluid Mechanics L-T-P-C: 3-0-2-8
Pre-requisites: Nil
Course objectives: a) To develop the basic understanding of fluid statics and dynamics b) To develop analytical skills to deal with various types of fluid flow problems c) Laboratory sessions are designed for developing experimental skills
Proposed Course Content
Introduction: Definition and classification of fluids, Fluid as a continuum, Properties of fluids, Fluid Statics: Pascal’s Law, Submerged surfaces Buoyancy and Stability , Stability of submerged bodies, Fluid in a Rigid Body Motion, Fluid Kinematics: Lagrangian and Eulerian Approaches, Features of fluid Motion, Conservation Equation: Reynolds Transport Theorem, Conservation
mass, momentum and energy, Steady Incompressible Viscous Flows: Flow between infinite parallel plates, Couette Flow, Hagen-Poiseuille Flow, Losses in a pipe, Pipe networks, Boundary layer flow: Prandtl boundary layer equations, Blasius Solution Von Karman Momentum Integral Equation, Boundary layer separation, Potential flow: stream and velocity potential function, basic flows, doublet, Blunt body etc., Compressible Flows: Velocity of sound , Mach number , Convergent Nozzles, Convergent-Divergent Nozzles, Fanno Flow, Rayleigh Flow, Shock Waves, Turbulent Flows: character of turbulence, Reynolds-averaged, NavierStokes equation, Anatomy of turbulent boundary layer, Prandtl mixing length model. Dimensional Analysis and Similitude: Buckingham-pi theorem, Similarities-geometric, kinematic and dynamic.
Experiments in Fluid Mechanics
1. Measurement inside a wind tunnel: pressure, velocity, lift, drag, Bernoulli’s
exercise, Boundary layer development
2. PIV measurements
3. Reynolds Experiment
4. Flow measurements in pipe flow
5. Flow measurements in open channel flow
6. Losses in a pipe network
Text and Reference Books: 1. F. M. White, 1999, Fluid Mechanics, 4th Ed, McGraw-Hill. 2. Cengel and Cimbala, Fluid Mechanics: Fundamentals and Applications, Mc Graw Hill. 3. R. W. Fox and A. T. McDonald, 1998, Introduction to Fluid Mechanics, 5th Ed, John Wiley. 4. V. Streeter and Benjamin, 2001, Fluid Mechanics:First SI-Metric Edition, Tata Mc Graw Hill. 5. Irwing Shames, Mechanics of Fluids, 4th Ed., McGraw Hill. 6. PijushKundu, 2002, Fluid Mechanics, 2nd Ed., Academic Press. 7. B. R. Munson, D. F. Young and T. H. Okhiishi, Fundamentals of Fluid Mechanics, 4th Ed, John
Wiley, 2002. 8. S. W. Yuan, 1988, Foundations of Fluid Mechanics, Prentice Hall of India. 9. Batchelor G.K., 2000, An Introduction to Fluid Dynamics,2nd edition, Cambridge University press, 10. James Fay, Introduction to Fluid Mechanics, Prentice hall India. 11.
ME292 Measurement Laboratory L-T-P-C: 0-0-2-2
Course Prerequisite: Nil
Course Objective: After completion of this course the student should be able to:
• Recognize different sensors and measurement Methodology in
Measurement Systems.
• Should be able to apply measurement Fundamentals in innovative way to
apply in varieties of systems.
• Project Based Lab- a) select and apply appropriate design methodology
b) generate a variety of conceptual instruments c) demonstration of
feasibility of the conceptual design with special emphasis on Mechanical
Systems.
Details of Course:
S. No. Contents Contact
Hours
1. Metrology
• Measurement of Angle
• Design and Manufacturing of Go and No-Go gauges in Shaft and Hole system
• Measurement of Surface parameters RA, CLA etc Measurement of Alignment – Shafts, Motors.
• Interferometry and measurement of precession flatness and
Alignment
6
2. Measurement of Flow and Temperature
• Flow Measurement through- Venturi, orifice, Hot wire anemometer.
• Temperature measurement through
thermocouple, Thermogram.
6
3. DAQ and Signal Processing DAQ
and its components Low pass and High pass filters
Spectrum Analysis
4
4. Measurement of Force, VelocityAcceleration
• Measurement of Cutting force through Dynamometers
• Measurement of Acceleration by Accelerometer/ Velocity
• Dynamic Force by Impedance Head
4
5. Project
A group of students will conceptualize, design, and fabricate a
sensor (e.g. temperature, force, pressure, RPM etc.). The
8
students will then characterize the sensor by desig performing proof-of-concept experiments. Deliverables 1. A bench top sensor fabricated by the students
2. A project report that will include
the
ning and
following
components
• Introduction
• State-of-the-art of the
concerned sensing
technology
• Principle of Operation
• Design Methodology
• Proof-of-concept experiments
• Discussion and analysis
• Order (First order, second order)
• Instrumentation and Signal Processing
• Range
• Resolution
• Accuracy Precision • Linearity
• Uncertainty Propagation
• Conclusions
• Future work and lessons learnt
3. The student will also submit a 3 minute video w
will explain how the sensor works and di unique
features it possesses. The video s captured
keeping in mind the fact that it should to
understand and a high school st comprehend the
basic principle of operation.
here they
scuss the
hould be be
easy udent
can
Total 28
Suggested Books: 1. E. O. Doebelin, “Measurement systems- Applications and Design”, 4e, Tata McGraw-Hill,
1990. 2. T. G. Beckwith, R. D. Marangoni and J. H. Lienhard, “Mechanical Measurements”, 5e,
Addison Wesley, 1993. 3. Riley Dally and McConnell, “Instrumentation for engineering measurements”, 2e, John Wiley
& Sons, 1993. 4. R. S. Figiola and D. E. Beasley, “Theory and design for mechanical measurements”, 2(e),
John Wiley, 1995. 5. “Handbook of Modern Sensors” by Jacob Fraden
ME313 Design of Machine Elements L-T-P-C : 3-0-3-9
Pre-requisites: Mechanics of Solids (ME204)
Syllabus:
Limits, fits, and tolerances, Principles of mechanical design; Factor of safety, strength,
rigidity, fracture, wear, and material considerations; Stress concentrations; Design for
fatigue; Design of bolted, and welded joints; Shafts; Keys; Clutches; Brakes; Springs;
Gears; bearing and lubrication.
Laboratory session:
Machine Drawing: Assembly and Part drawings,Solid modeling etc.
Design of gear box and sub-components (shafts, bearings, bolts, housing,
coupling, etc.);
IC engine components ; Screw jack; Shaft coupling;
ComputerAided Design
Two Tribology experiments Texts/References:
1. J. E. Shigley, Mechanical Engineering Design, McGraw Hill, 1989. 2. Design Data, PSG Tech, Coimbatore, 1995 3. M. F. Spotts, Design of Machine Elements, 6th ed., Prentice Hall, 1985 4. A. H. Burr and J. B. Cheatham, Mechanical Analysis and Design, 2nd ed., Prentice Hall,
1997. 5. Machine Drawing by N D Bhatt
ME315 Heat and Mass Transfer L-T-P-C: 3-0-2-8
Pre-requisites: Nil
Course objectives: a) To learn the fundamentals of heat conduction, convection, and radiation b) To be able to solve basic heat transfer engineering problems
Proposed Course Content Modes of heat transfer:Conduction: One-dimensional steady conduction, resistance network
analogy, fins, two- and three-dimensional steady conduction, one-dimensional unsteady
conduction, semi-infinite solids. Convection: fundamentals, order of magnitude analysis of
momentum and energy equations, hydrodynamic and thermal boundary layers, dimensional
analysis, free and forced convection, external and internal flows. Heat exchangers: LMTD and
є-NTU methods. Radiation: Stefan Boltzmann law, Planck’s law, emissivity and absorptivity,
radiant exchange between black surfaces, view factors, network analysis. Phase change heat
transfer: Boiling and condensation. Mass transfer: molecular diffusion, Fick’s law, binary
species
List of experiments 1. Measurement thermal conductivity different materials using composite wall apparatus 2. Unsteady heat conduction experiment 3. Determination of a convective heat transfer coefficient in (a) natural and (b) force
convection 4. Performance evaluation of double pipe heat exchanger for (a) parallel flow (b) counter
flow 5. Emissivity measurement 6. Performance evaluation of shell-and-tube heat exchanger 7. Phase change heat transfer: (a) Pool boiling and (b) Condensation
Texts and References
1. F.P. Incropera and D.P. Dewitt, Fundamentals of Heat and Mass Transfer, 4th Edition, John Wiley and
Sons. 1996.
2. J.P. Holman, Heat Transfer, 8th Edition, McGraw Hill, 1997. 3. M.N. Ozisik, Heat Transfer – A basic approach, McGraw Hill, 1985. 4. Bejan, Convection Heat Transfer, 2nd Edition, Interscience, 1994. 5. Y. A. Cengel, Heat and Mass Transfer, 3rd Edition, Tata McGraw-Hill, New Delhi, 2007.
Main differences between the proposed and the current course structure:
2. As per the suggestion of the external advisors and discussion among the faculty member
at IIT Patna, the theory course has been combined with heat transfer laboratory. 3. Deletions
a. special heat transfer processes like transpiration and film cooling b. ablative cooling
ME331 Manufacturing Technology - I L-T-P-C: 3-0-0-6
Pre-requisites: Nil
Module 1: Foundry
Moulding materials and their requirements: types, composition and properties of molding
sand, sand testing; Patterns: types of patterns, pattern allowances; Casting processes:
sand casting, shell moulding, sodium silicate moulding, no bake moulding, gravity die,
pressure die casting, investment casting, centrifugal casting, continuous casting, thin roll
casting, plaster moulding, ceramic shell moulding; Solidification of casting: nucleation,
grain growth, flow properties of molten metal, mechanism of heat transfer, phase change,
solidification of binary alloy, directional and progressive solidification; Gating and risering
systems: casting terminology, design of flask, sprue, runner and gating system, type of
gate, time of solidification, chill and chaplet, CFR; Casting defects and their remedies.
Module 2: Joining processes
Physics, principle of operation and process parameters: Fusion welding (MMAW, MIG,
TIG, SAW, power characteristics, seam, spot, projection, electroslag, Thermit and gas
welding), Solid-state welding (adhesive, diffusion, friction, ultrasonic and explosive
welding), Solid-liquid state welding (brazing and soldering), Unconventional welding
(EBW, LBW etc.); Relative advantages and limitations of joining processes; Welding
defects, inspection and testing.
Module 3: Fundamentals of metal forming
Introduction to plastic deformation of materials and related properties; various bulk
deformation processes (forging, drawing, extrusion, rolling, swaging); load analysis of
various bulk deformation processes by slab method; forming defects; sheet metal working
(blanking & punching, bending, deep drawing, spinning, load analysis);
Module 4: Powder metallurgy
Basic principles, powder properties and production, blending and mixing, compaction,
sintering, post-sintering treatment, shape factor and aspect ratio, advantages and
limitations of the process, applications.
Texts/References:
1. James S Campbell, Principles of Manufacturing Materials and Processes, Tata McGraw Hill,
1995. 2. F.C. Flemmings, Solidification processing, Tata McGraw Hill, 1982 3. M J Rao, Manufacturing Technology: Foundry, Forming and Welding, Tata McGraw Hill, 1987. 4. G E Linnert, Welding Metallurgy, AWS, 1994. 5. P C Pandey and C K Singh, Production Engineering Sciences, Standard Publishers Ltd. 1980. 6. R W Heine, C R Loper, and P C Rosenthal, Principles of Metal Casting, 2nd ed, Tata McGraw
Hill, 1976. 7. A Ghosh and A K Mallik, Manufacturing Science, Wiley Eastern, 1986.
ME393 Engineering Software Laboratory L-T-P-C: 1-0-3-5
Course Objective: Exposure to industrial softwares used in Mechanical Engineering
practices.
Course Contents:
CAD/CAM: 2D and 3D geometric transformation, Composite Transformation, Projections;
Curves: Cubic, Bezier, Splines; Surfaces: Quadric, Coons patch, Super Quadric, Bezier,
B-Splines. Process planning, CL data generation, Automatic CNC code generation.
FEM: Solid model creation, different types of elements, chunking of model, meshing,
mesh quality, different kinds of analysis : static, dynamic, transient, thermal,
electromagnetic, acoustics, sub-structuring and condensation, Error and convergence.
CFD: Different types of CFD techniques, various stages of CFD techniques (i) pre
processor: governing equations, boundary conditions, grid generation, different
discretization techniques (ii) processor: solution schemes, different solvers (iii)
postprocessing: analysis of results, validation, grid independent studies etc. Developing
codes using commercial software for solving few problems of laminar and turbulent flow
with heat transfer applications.
Engineering softwares related to CAD/CAM, FEM, CFD, with both GUI and script like
languages, are to be used for laboratory assignments.
Text/Reference Books: 1. D. F. Rogers and J. A. Adams, “Mathematical Elements for Computer Ggraphics”, McGraw-Hill,
1990 2. M. Groover and E. Zimmers, “CAD/CAM: Computer-Aided Design and Manufacturing”, Pearson
Education, 2009. 3. A. Saxena and B. Sahay, “Computer Aided Engineering Design”, Springer, 2007. 4. J. N. Reddy, “An Introduction to Finite Element Methods”, 3rd Ed., Tata McGraw-Hill, 2005.
5. J. Fish, and T. Belytschko, “A First Course in Finite Elements”, 1st Ed., John Wiley and Sons,
2007. 6. J. D. Anderson, “Computational Fluid Dynamics”, McGraw-Hill Inc. (1995). 7. H. K. Versteeg and W. Malalaskera, “An Introduction to Computational Fluid Dynamics”, Dorling
Kindersley (India) Pvt. Ltd. (2008).
ME395/ME396 Engineering Practicum I & II L-T-P-C: 0-0-3-3
Pre-requisites: Nil
Course objectives: To instill among students a systematic approach for solving current research or practical
mechanical engineering problems
Description:
A student will work on a current research or practical mechanical engineering problem of
interest. The problem to be undertaken should require implementation of fundamental
knowledge earned in at least two of the three (Design, Manufacturing, Thermal and Fluids)
streams of the mechanical engineering. The problem should have sufficient scope both
for theoretical/analytical/numerical modeling and hands-on experience. The project
should be broken down into logical intermediate steps such as understanding problem
definition, literature review to assess the existing solutions, back-of-theenvelope
calculations to downselect a few better candidates, propose modification to these
solutions if required, preliminary modeling, set-up design/algorithm development,
fabrication/code development, experiments/benchmarking, analysis and interpretation of
the results. The project must deliver a hardware or a computation package along with the
detailed report summarizing the same.
Guidelines:
1. Each student will work individually with at least two faculty members
2. Faculty members should represent at least two of the three
(Design,
Manufacturing,Thermal and Fluids) streams of the mechanical engineering
3. The pool of projects with well-defined practical problems should be announced at
least two weeks before the start of the semester
4. Intermediate and final deliverables upon the successful completion of the project
should be clearly identified in the announcement
5. The course must involve weekly interaction between the student and the faculty
members
6. Two seminars each semester must be scheduled to present the progress of the
project
7. A prototype/computational package and a report will be due at the end of the
second semester
ME312 System Dynamics and Control L-T-P-C: 3-0-2-8
Pre-requisite: Dynamics (ME201)
Syllabus:
Fundamental of System- zero, first and second order system- application to free
vibration.
Transfer function- application to SDOF forced vibration, whirling of rotating shaft and
critical speeds of shafts, vibration isolation, Transfer functions of some standard motion
sensor like accelerometer, seismometer and velocity pick up.
Feedback System- Block diagram and signal flow representation, state space model.
Introduction to PID controller,Application to common control system.
Stability and analysis of Dynamical System- Routh-Hurwitz stability criterion, relative
stability, Root-locus method, Bode diagrams, Nyquist stability criterion, PI, PD, and PID
controllers; Lead, lag, and lag-lead compensators, Application to common engineering
problems.
Introduction to Passive two and multi-DOF system- normal mode vibration,
coordinate coupling, forced harmonic vibration, vibration absorber, flexibility matrix,
stiffness matrix, reciprocity theorem, eigenvalues and eigenvectors, orthogonal
properties of eigenvectors, modal matrix, Normal mode summation.
Introduction to State Space Control: Controllability, observability and design.
List of Experiments:
1. To determine the natural frequency of a cantilever beam
2. To determine the effect of feedback on a cantilever beam
3. To obtain the transient response of a cantilever beam
4. To design Multi DOF vibration modes in Air Track
5. Circuit simulation with PID controller
6. To control the water level of Couple Tank system
7. To design control parameter of Active mass suspension
8. To experiment with sensor/instrumentation kit- Strain Gauge, LVDT,
Thermocouple, DAQ, etc Texts/References:
1. W. T. Thomsom and Dahleh, M. D., Theory of Vibration with Applications, 5th ed., Pearson
Education, 1999.
2. Doebelin E.O., Measurement systems- Applications and Design, 4e, Tata McGraw-Hill, 1990
3. K Ogata, Modern Control Engineering, 4th ed, Pearson Education Asia, 2002.
4. B C Kuo and F. Golnaraghi, Automatic Control Systems, 8th ed, John Wiley (students ed.),
2002.
5. M Gopal, Control Systems: Principles and Design, 2nd ed, TMH, 2002.
6. M Gopal, Modern Control System Theory, 2nd ed., New Age International, 1993.
7. R. C. Dorf and R. H. Bishop, Modern Control Systems, 8th ed., Addison Wesley, 1998.
8. P. Belanger, Control Engineering: Amodern approach, Saunders College Publishing, 1995.
ME314 Applied Thermodynamics L-T-P-C: 3-0-2-8
Prerequisite: Thermodynamics (ME211)
Objective: To introduce students various conventional applied thermal systems and the
corresponding thermodynamic design procedures for each of these systems.
Module Contents No of Lectures
Module 1 Vapour power Cycles: Rankine cycle, reheat cycle, regenerative cycle,
cogeneration, low-temperature power cycles, ideal
working fluid and binary/multi-fluid cycles; Steam
Turbine: impulse and reaction stage, degree of
reaction, velocity triangle, velocity and pressure
compounding, efficiencies, reheat factor, nozzles;
Condenser; Cooling Tower.
10
Module 2 Turbomachinery: Pelton-wheel, Francis and Kaplan
turbines 2
Module 3 Refrigeration and Air Conditioning: vapour compression and vapour absorption refrigerators,
gas cycles, refrigerants and environmental issues;
Airconditioning;
6
Module 4 Compressors: Reciprocating Air Compressors: work transfer, volumetric efficiency, isothermal efficiency, multistage compression with intercooling. Centrifugal and Axial-Flow
Compressors;
3
Module 5 Gas Turbine and Jet Propulsion: gas turbine cycle, intercooling, reheating, regeneration, closed cycles, optimal performance of various cycles, combined gas and steam cycles; Axial-Flow Gas Turbine; Jet Propulsion: turbojet, turbofan; Combustion
Chambers;
9
Module 6 I.C. Engines: Classification - SI, CI, two-stroke, four-stroke etc.,
operating characteristics - mean effective pressure,
torque and power, efficiencies, specific fuel consumption
etc., air standard cycles - Otto, Diesel and dual, real
airfuel engine cycles, Thermochemistry of fuels - S.I. and
C.I. engine fuels, self ignition, octane number, cetane
number, combustion in S.I. and C.I. engines, Air and fuel
injection - injector and carburetor, MPFI etc., ignition,
Engine Emissions.
12
Text/Reference:
1. G F C Rogers and Y R Mayhew, Engineering Thermodynamics Work and Heat Transfer 4e,
Pearson, 2003.
2. T D Eastop and AMcConkey, Applied Thermodynamics for Engineering Technologists, 5e,
Pearson, 2003.
3. M J Moran and H N Shapiro, Fundamentals of Engineering Thermodynamics 3e, John Wiley,
1995.
4. M MElWakil, Power Plant Technology, McGraw Hill International, 1992.
5. P K Nag, Powerplant Engineering, Tata McGraw Hill, 2e, 2002.
6. Refrigeration and Air Conditioning, Arora C P, TMH
7. H I H Saravanamuttoo, G F C Rogers and H. Cohen, Gas Turbine Theory 4e, Pearson, 2003
8. W WPulkrabek, Engineering Fundamentals of the Internal Combustion Engine , PHI, 2002.
9. C R Fergusan and A T Kirkpatrick, Internal Combustion Engines, John Wiley & Sons, 2001.
List of Experiments:
1. Performance of 4-stroke petrol engine 2. Performance of 4-stroke diesel engine 3. Exhaust Gas analysis 4. Performance of Pelton turbine 5. Performance of Francis turbine
ME332 Manufacturing Technology - II L-T-P-C: 3-0-3-9
Pre-requisites: Nil
Module-I: Fundamentals of metal cutting
Geometry of single point cutting tool (ORS, ASA etc.); orthogonal cutting; mechanism of
chip formation; Analytical and experimental determination of cutting forces (Merchant’s
circle diagram); cutting temperature (causes, effect, assessment and control);
machinability; tool materials; failure of cutting tools and tool life; economics of metal
cutting;
Module-II: Machine tools
Generatrix and directrix; classification of machine tools; setting and operations on
machines: lathe, shaper, planer, milling, drilling, broaching, slotting, grinding, gear cutting
machines; mechanism: thread cutting, pawl and ratchet wheel, quick return, indexing etc.;
Finishing: honing, lapping; CNC machine tools;
Module-III: Tooling
Principle of location and clamping; principles of design of jigs and fixtures;
Module-IV: Unconventional machining
USM, AJM, AWJM, ECM, EDM, LBM, EBM: principle of operation, process parameters,
material removal rate, advantages and limitations; Module-V: Manufacturing with
plastic materials
Properties of plastics; plastic materials; processing technology: extrusion, injection
moulding, blow moulding, thermoforming, etc.;
Texts/References:
1. M. C. Shaw, Metal Cutting, Tata McGraw Hill, New Delhi, 2004. 2. S. Kalpakjain, S. R. Schmid, Manufacturing Processes for Engineering Materials, fifth edition,
Pearson. 3. A. Ghosh and A. K. Malik, Manufacturing Science, East West Press, 2010. 4. P.N Rao, Manufacturing Technology, 4e, volume 1, McGraw Hill Education. 5. G. Boothroyd and W. A. Knight, Fundamentals of Machining and Machine Tools, CRC-Taylor and
Francis, 2006.
ME431 Industrial Engineering and Operations Research L-T-P-C: 3-0-0-6 Pre-
requisites: Probability and Statistics
Module I:
Introduction: history, method, Organisation: Theory, Principle, structure, Product
Design and development: factors, product analysis, Production planning and control:
function (process planning, material planning), classification (capacity, aggregrate,
operational planning), forecasting methods Manufacturing planning: MRP, MRP-II, JIT,
CIM, ERP, Asset management, Supply change management,Quality engineering:
dimension, Juran quality, total quality, SPC, SQC (methods, reliability) Facility layout:
type of layout, layout planning, line balancing, Chart and diagram: process analysis,
operation chart, process chart, flow diagram, activity chart Economics: elasticity of
demand, break even analysis Job evaluation: methods, wage payments plan, incentive
scheme, Inventory control: Objective, type (ABC and VED analysis), EOQ (case study)
Work measurement: cycle time, learning curve, charting technique, time study, motion
study, work sampling Ergonomic: Objective,History, system components, Type(physical,
cognitive, work environment, operational safety health).
Module II:
Introduction, Linear Programming: Graphical, Simplex, Dual Simplex, Transportation,
Assignment, Integer Programming: Branch and Bound technique, Network Model:
PERT and CPM, Spanning Tree (Prism and Kruskal algorithm).
Text/References:
1. S L Narasimhan, D W McLeavey, P J Billington, Production, Planning and Inventory Control,
Prentice Hall, 1997. 2. O. P Khana, Industrial Engineering, Dhanpat Rai 3. N V S Raju, Industrial Engineering and Management, CENAGE 4. J L Riggs, Production Systems: Planning, Analysis and Control, Wiley, 3rd ed., 1981. 5. A Muhlemann, J Oakland and K Lockyer, Productions and Operations Management, Macmillan,
1992. 6. H A Taha, Operations Research - An Introduction, Prentice Hall of India, 1997.
7. J K Sharma, Operations Research, Macmillan, 1997.
Elective Courses
ME503 Computational Fluid Dynamics (3-0-0-6)
Concept of Computational Fluid Dynamics: Different techniques of solving fluid dynamics
problems, their merits and demerits, governing equations of fluid dynamics and boundary
conditions, classification of partial differential equations and their physical behavior,
Navier-Stokes equations for Newtonian fluid flow, computational fluid dynamics (CFD)
techniques, different steps in CFD techniques, criteria and essentialities of good CFD
techniques.
Finite Difference Method (FDM):Application of FDM to model problems, steady and
unsteady problems, implicit and explicit approaches, errors and stability analysis, direct
and iterative solvers. Finite Volume Method (FVM): FVM for diffusion, convection-diffusion
problem, different discretization schemes, FVM for unsteady problems.
Prediction of Viscous Flows: Pressure Poisson and pressure correction methods for solving
NavierStokes equation, SIMPLE family FVM for solving Navier-Stokes equation, modelling
turbulence. CFD for Complex Geometry: Structured and unstructured, uniform and non-
uniform grids, different techniques of grid generations, curvilinear grid and transformed
equations.
Lattice Boltzman and Molecular Dynamics: Boltzman equation, Lattice Boltzman equation,
Lattice Boltzman methods for turbulence and multiphase flows, Molecular interaction,
potential and force calculation, introduction to Molecular Dynamics algorithms.
Text Books:
1. J. D. Anderson, “Computational Fluid Dynamics”, McGraw-Hill Inc. (1995).
2. S. V. Patankar, “Numerical Heat Transfer and Fluid Flow”, Hemisphere Pub.
(1980).
3. K. Muralidhar, and T. Sundarajan, “Computational Fluid Flow and Heat Transfer”,
Narosa (2003).
4. D. A. Anderson, J. C. Tannehill and R. H. Pletcher, “Computational Fluid Mechanics
and
Heat Transfer”, Hemisphere Pub. (1984).
5. M. Peric and J. H. Ferziger, “Computational Methods for Fluid Dynamics”, Springer
(2001).
6. H. K. Versteeg and W. Malalaskera, “An Introduction to Computational Fluid
Dynamics”, Dorling Kindersley (India) Pvt. Ltd. (2008).
7. C. Hirsch, “Numerical Computation of Internal and External Flows”,
ButterworthHeinemann, (2007).
8. J. M. Jaile, “Molecular Dynamics Simulation: Elementary Methods”, Willey
Professional, 1997.
9. A. A. Mohamad, “Lattice Boltzman Method: Fundamentals and Engineering
Applications withComputer Codes”, Springer (2011).
ME537 Refrigeration and Air conditioning (3-0-0-6)
Pre-requisites: Nil
Refrigeration
Refrigeration systems: Vapour compression, vapour absorption and air refrigeration
system, Thermoelectric refrigeration, Cryogenics.
Refrigeration Hardware: Refrigerant compressors, refrigerant condensers, refrigerant
evaporators, receiver, expansion devices, filter-drier, moisture indicator etc.
Refrigeration Controls: HP/LP cut-out, Solenoid valve, evaporator pressure regulator,
Accumulators, Suction pressure regulator.
Capacity control techniques: Hot gas by-pass scheme, Cylinder loading scheme, suction
gas throttling scheme
Refrigerants: Classification and nomenclature, desirable properties of refrigerants,
common refrigerants, environmental issues-Ozone depletion and global warming
Alternative refrigerants: low GWP and zero ODP newer refrigerants.
Applications of Refrigeration: Industrial refrigeration, Transport refrigeration, food
preservation (cold storage)
Air-conditioning
Review of Basic psychrometry: Sensible cooling/heating processes, humidification
/dehumidification processes on psychrometric chart etc.
Classification of air-conditioners: unitary systems (Window type/self-contained/single-
package unit), split-unit and Central air conditioning system
Cooling/Heating load calculations: Transmission load, Solar heat gain, Occupancy load,
Equipment load, Infiltration and ventilation load.
Duct Design: Design considerations and procedures
Air Conditioning controls: basic elements, types of control systems
Texts and References:
1. Dossat R.J., 2008. Principles of Refrigeration, Pearson Education (Singapore) Pte.
Ltd.
2. Stoecker W., 1982. Refrigeration and Air Conditioning, Tata McGraw-Hill
Publishing Company Limited, New Delhi.
3. Khan, M.K., 2012, Chapter 15: Refrigeration, Air Conditioning and Cold Storage,
Handbook of Food Process Design, pp. 381-429., Wiley-Blackwell (UK).
4. Arora C.P., 2005. Refrigeration and Air Conditioning, Tata McGraw-Hill Publishing
Company Limited, New Delhi.
5. Ameen A., 2006. Refrigeration and Air Conditioning, Prentice Hall of India Private
Limited, New Delhi.
6. American Society of Heating Refrigerating and Air Conditioning Engineers Inc,
2013 ASHRAE Handbook- Refrigeration Fundamentals.
7. American Society of Heating Refrigerating and Air Conditioning Engineers Inc,
2011 ASHRAE Handbook- HVAC Applications.
ME535 Acoustics (3-0-0-6)
Acoustics: Objective-Understanding of Vibration, Sound, Noise. Mathematical basics for
Acoustics- PDE, Vectors, divergence (Greens) theorem, Stokes theorem, Signal
processing. Development of Wave equation, Helmholtz equation. Acoustic wave equation-
Plane waves, Acoustic -Power, Intensity & measurement. Transmission, Absorption and
attenuation of sound waves in fluids, Spherical Waves, monopole, dipole, quadropole and
piston radiator. Radiation and Reception of Acoustic waves. Active sound control Pipes,
Cavities, Waveguides, Resonators, Filters and DuctsPlane Waves, energy dissipation,
finite amplitudes and transmission phenomena, horn radiator, mufflers, silencers Noise,
signal detection, hearings and Speech-Noise spectrum and band level, combining band
levels and Tones, Detecting signal in noise, Detection threshold, Ear-Thresholds, Equal
loudness level contours, Critical bandwidth, Masking Loudness level, Pitch and frequency
Environmental Acoustics- weighted Sound levels, Speech interference, Criteria for
Community noise Highway noise, Aircraft noise rating, Hearing loss, Legislations for
Noise control Architectural acoustics, Reverberation time, Sound Absorption materials,
Direct and Reverberant Live rooms, Acoustic factors in design Transduction-
transducers/transmitters- anti reciprocal, reciprocal. Loudspeakers, Microphones.
Introduction to Underwater Acoustics.
Text Books:
[1] Fundamental of Physical Acoustics, David T Black Stock, John Wiley & Sons, Inc
[2] Noise and Vibration Control Engineering: Principles and Applications Leo L. Beranek ,
John Wiley & Sons, Inc
[3] Handbook of Noise and Vibration Control edited by Malcolm J. Crocker, John Wiley &
Sons,
Inc., New York, 2007
ME536 Nonlinear System Dynamics (3-0-0-6)
Introduction to Nonlinear Dynamical System: Linear vs. nonlinear behavior, Classification
of nonlinear Systems, Examples of structural, fluid-mechanical and chemical/biological
systems, Existence and uniqueness of solutions.
First-order nonlinear systems: Autonomous systems: Equilibrium points, linear systems,
invariant sets, linearization, phase diagrams and velocity fields, behavior dependence on
parameters, bifurcations of equilibria (saddle-node, pitchfork and transcritical), implicit
function theorem. Nonautonomous systems.
Second-order nonlinear conservative/nonconservative systems: Phase plane analysis,
equilibrium points, linearization, stability, periodic orbits and saddle points, potential
function and phase portrait, parameter-dependent conservative systems, local
bifurcations, examples of global bifurcations, effect of dissipative forces.
First-order system in the plane: General phase plane analysis, linearization, general
solution for linear systems, classification of equilibrium points, limit cycles, Bendixon's
criterion and Poincare Bendixon theorem. Point mapping techniques, exact
transformations, and Poincare mappings.
One-dimensional linear and nonlinear mappings: Fixed points, linearization, stability,
parameterdependent mappings, bifurcations.
Perturbation and other approximate methods: Introduction to regular and singular
perturbation expansions through algebraic and transcendental equations; roots of
equations and dependence on parameters. Perturbation method for free oscillations,
secular terms, frequency dependence on response, Poincare-Lindstedt technique for
periodic solutions, Harmonic balance and Fourier series for periodic solutions. Averaging
methods, amplitude and frequency estimates, slowly varying amplitude and phase ideas,
self-excited oscillations. Multiple time-scale techniques. Forced oscillations, concept of a
resonance, oscillations far from resonance, near resonances and strong and weak
excitations, response near primary resonance, softening and hardening nonlinearities,
Duffing's equation and primary and secondary resonances, forced response of self excited
systems near resonance, frequency locking and entrainment.
General linear systems with constant and periodic coefficients: Concepts of stability
(Lyapunov, Poincare, etc.), stability by linearization, boundedness of solutions, Mathieu's
equation, transition curves and periodic solutions for Mathieu-Duffing system.
Relaxation oscillations: The van der Pol oscillator.
Multi degree of freedom systems: Examples, various types of resonances – external,
internal, and combination, etc., response prediction using methods of averaging and
multiple scales.
Some more on bifurcations, structural stability and chaos.
Experimental Demonstration: String ballooning motion. Fun with Cantilever beam of large
deformation and other developed models. Electronic Circuit building. Numerical
computation with Matlab/ Mathematica.
Text Books:
1. Jordan, D. W. and Smith, P.: Nonlinear Ordinary Differential Equations, 3rd Edition,
Clarendon Press, Oxford, 1999 ed.
2. Nayfeh, A. H. and Mook, D. T.: Nonlinear Oscillations, Wiley Interscience, New
York., 1979 ed.
3. Nayfeh, A. H and Balachandran, B. : Applied Nonlinear Dynamics: Analytical,
Computational and Experimental Methods, Wiley, 2008 ed.
4. Strogatz, S. H. : Nonlinear Dynamics And Chaos: With Applications To Physics,
Biology, Chemistry, And Engineering, Westview Press, 2001 ed.
5. Ogorzalek Maciej J.:Chaos and Complexity in Nonlinear Electronic Circuits, World
Scientific Series on Nonlinear Science Series A, 1997 ed.
ME534 Wear and Lubrication of Machine components (3-0-0-6)
Course objectives: Surface failure due to rubbing is a critical problem that affects the life
and reliability of modern machinery. The knowledge of surface interaction is
interdisciplinary and essential to design for life and reliability and also enable innovation
in electromechanical and material engineering design. The course focuses on theories of
friction, wear, contact and lubrication, approaches to model basic tribological
elements/systems, and methods to simulate tribological processes. Course content:
Definition of Tribology, Significance for Maintenance and Reliability of machines,
Terotechnology. Surface- roughness, materials, mechanics of surface/solid contacts
Friction Laws of Friction, Mechanisms of Friction, Friction Space, Stiction, Stick Slip,
Surface Temperature, surface energy, micro and nano scale viewsWear Adhesive Wear,
Delamination Wear, Fretting Wear, Abrasive Wear, Erosive Wear, Corrosive Wear, Mild
and Severe Oxidational Wear, Wear-Mechanism Maps, Stribeck Curve, Reciprocatory,
Rotary, Rolling/sliding-
HeathcoteLubrication- Regimes, Boundary Lubrication, Solid-Film Lubrication, Mixed
Lubrication, Hydrodynamic Lubrication, Hydrostatic Lubrication, EHL, Lubrication in
vacuum, Bearings- Rolling element, Step, Pad, Journal, Spiral groove, porous, air bearing,
Gears, Cams, reciprocatory Lubricant- composition, basefluids, rheology, Additives-
boundary layer. Nano additivesDynamic seals- Mechanical face seals, Rotary Lip seal,
Elastomeric, Bushing, Labyrinth, applications of sealsNanoscale tribology Interatomic
Interactions, Atomic Force Microscope (AFM), Challenges of Tribological Testing at Small
Scales Tribological tests Friction, Wear, Life tests, Standards, Reciprocatory, Rotary,
rolling/Sliding-spiral orbit, Dry and Lubricated tests, Scaling up subscale tests, component
tests. Nano scale testsSurface engineering- coatings, modifications, repairMaterials-
metals, polymer, ceramics for Tribological designCase Studies Sliding Contacts, Rolling
Contacts, Bearing Design, Coating Selection. Electric Contacts, Microelectromechanical
Systems (MEMS)
Text Books:
1. Tribology, Principles and Design Applications, by Arnell et al.
2. Principles and Applications of Tribology, by B. Bhushan
3. Tribology Handbook, by B. Bhushan
Contact Mechanics KL Johnson, 1985 Cambridge
4. Basic Lubrication Theory, By A. Cameron, 1976
ME501 Robotics: Advanced Concepts and Analysis (3-0-0-6)
Introduction to robotics: brief history, types, classification and usage and the science and
technology of robots.
Kinematics of robot: direct and inverse kinematics problems and workspace, inverse
kinematics solution for the general 6R manipulator, redundant and over-constrained
manipulators. Velocity and static analysis of manipulators: Linear and angular velocity,
Jacobian of manipulators, singularity, static analysis.
Dynamics of manipulators: formulation of equations of motion, recursive dynamics, and
generation of symbolic equations of motion by a computer simulations of robots using
software and commercially available packages.
Planning and control: Trajectory planning, position control, force control, hybrid control
Industrial and medical robotics: application in manufacturing processes, e.g. casting,
welding, painting, machining, heat treatment and nuclear power stations, etc; medical
robots: image guided surgical robots, radiotherapy, cancer treatment, etc;
Advanced topics in robotics: Modelling and control of flexible manipulators, wheeled mobile
robots, bipeds, etc. Future of robotics.
Reference Books:
1. M. P. Groover, M. Weiss, R. N. Nagel and N. G. Odrey, “Industrial Robotics-
Technology, Programming and Applications”, McGraw-Hill Book and Company
(1986).
2. S. K. Saha, “Introduction to Robotics”, Tata McGraw-Hill Publishing Company Ltd.
(2008).
3. S. B. Niku, “Introduction to Robotics–Analysis Systems, Applications”, Pearson
Education (2001).
4. . A. Ghosal, Robotics: “Fundamental Concepts and Analysis”, Oxford University
Press (2008).
5. Pires, “Industrial Robot Programming–Building Application for the Factories of the
Future”, Springer (2007).
6. Peters, “Image Guided Interventions – Technology and Applications”, Springer
(2008).
7. K. S. Fu, R. C. Gonzalez and C.S.G. Lee, “ROBOTICS: Control, Sensing, Vision
and Intelligence”, McGraw-Hill (1987).
8. J. J. Craig, “Introduction to Robotics: Mechanics and Control”, 2nd edition, Addison-
Wesley (1989).
ME504: Vehicle Dynamics and Multi-body Systems (3-0-0-6)
Introduction to vehicle dynamics: Vehicle coordinate systems; loads on axles of a parked
car and an accelerating car. Acceleration performance: Power-limited acceleration,
traction-limited acceleration. Tire models: Tire construction and terminology; mechanics of
force generation; rolling resistance; tractive effort and longitudinal slip; cornering
properties of tire; slip angle; camber thrust; aligning moments.
Aerodynamic effects on a vehicle: Mechanics of airflow around the vehicle, pressure
distribution, aerodynamic forces; pitching, rolling and yawing moments; crosswind
sensitivity. Braking performance: Basic equations for braking for a vehicle with constant
deceleration and deceleration with wind-resistance; braking forces: rolling resistance,
aerodynamic drag, driveline drag, grade, tire-road friction; brakes, anti-lock braking
system, traction control, braking efficiency. Steering systems and cornering: Geometry of
steering linkage, steering geometry error; steering system models, neutral steer, under-
steer, over-steer, steering ratio, effect of under-steer; steering system force and moments,
low speed and high speed cornering; directional stability of the vehicle; influence of front-
wheel drive. Suspension and ride: Suspension types—solid axle suspensions, independent
suspensions; suspension geometry; roll centre analysis; active suspension systems;
excitation sources for vehicle rider; vehicle response properties, suspension stiffness and
damping, suspension isolation, active control, suspension non-linearity, bounce and pitch
motion. Roll-over: Quasi-static roll-over of rigid vehicle and suspended vehicle; transient
roll-over, yaw-roll model, tripping. Multi-body systems: Review of Newtonian mechanics
for rigid bodies and system of rigid bodies; coordinate transformation between two set of
axes in relative motion between one another; Euler angles; angular velocity, angular
acceleration, angular momentum etc. in terms of Euler angle parameters; Newton-Euler
equations of motion; elementary Lagrangian mechanics: generalised coordinates and
constraints; principle of virtual work; Hamilton’s principle; Lagrange’s equation,
generalized forces. Lagrange’s equation with constraints, Lagrange’s multiplier.
Text Books
1. T.D. Gillespie, “Fundamental of Vehicle Dynamics”, SAE Press (1995)
2. J.Y. Wong, “Theory of Ground Vehicles”, 4th Edition, John Wiley & Sons (2008).
3. Reza N. Jazar, “Vehicle Dynamics: Theory and Application”, 1st Edition, 3rd
Printing, Springer (2008).
4. R. Rajamani, “Vehicle Dynamics and Control”, Springer (2006).
5. A.A. Shabanna, “Dynamics of Multibody Systems”, 3rd Edition, Cambridge
University Press (2005).
Reference Books:
1. G. Genta, “Motor Vehicle Dynamics”, World Scientific Pub. Co. Inc. (1997).
2. H.B. Pacejka, “Tyre and Vehicle Dynamics”, SAE International and Elsevier (2005).
3. Dean Karnopp, “Vehicle Stability”, Marcel Dekker (2004).
4. U. Kiencke and L. Nielsen, “Automotive Control System”, Springer-Verlag, Berlin.
5. M. Abe and W. Manning, “Vehicle Handling Dynamics: Theory and Application”, 1st
Edition, Elsevier (2009).
6. L. Meirovitch, “Methods of Analytical Dynamics”, Courier Dover (1970).
7. H. Baruh, “Analytical Dynamics”, WCB/McGraw-Hill (1999).
ME506: Emerging Smart Materials for Mechatronics Applications (3-0-0-6)
Introduction: Smart materials and their application for sensing and actuation,
Mechatronics aspects. Piezoelectric materials: Piezoelectricity and piezoelectric materials,
Constitutive equations of piezoelectric materials, Piezoelectric actuator types, Control of
piezoelectric actuators, Applications of piezoelectric actuators for precise positioning and
scanning.
Shape memory alloys (SMA): Properties of shape memory alloys, Shape memory effects,
Pseudoelasticity in SMA, Design of shape memory actuator, selection of materials, Smart
actuation and control, Applications of SMA in precision equipments for automobiles, trains
and medical devices. Electro-active polymers (EAPs): Ionic polymer metal composites
(IPMC), Conductive polymers, Carbon nanotubes, Dielectric elastomers, Design & control
issues for EAP actuators, Applications of EAP for biomemetic, tactile display and medical
devices.
Magnetostrictive materials: Basics of magnetic properties of materials, magnetostriction:
constitutive equations, types of magnetostrictive materials, Design & control of
magnetostrictive actuators, Applications of magnetostrictive materials for active vibration
control. Summary, conclusion and future outlook: Comparative analysis of different smart
materials based actuators, Conclusions, Future research trend and applications trends of
smart materials and smart materials based actuator technology.
Texts Books:
1. Jose L. Pons, Emerging Actuator Technologies, a Micromechatronics Approach,
John Wiley & Sons Ltd, 2005. .
2. Ralph Smith, Smart Material Systems: Model Development, SIAM, Society for
Industrial and Applied Mathematics, 2005. .
3. F. Carpi, D. De Rossi, R. Kornbluh, R. Pelrine, P. Sommer-Larsen, Dielectric
Elastomers as Electromechanical Transducers, Elsevier, Hungry, 2008. .
4. Y. B. Cohen, Electroactive Polymer (EAP) Actuators as Artificial Muscles Reality,
Potential and Challenges, SPIE press, USA, 2004.
ME502: Industrial Automation (3-0-0-6)
Unit 1: Automation: Introduction, automation principles and strategies, basic elements of
advanced functions, levels modeling of manufacturing systems.
Unit 2: Material handling: Introduction, material handling systems, principles and design,
material transport system: transfer mechanisms automated feed cut of components,
performance analysis, uses of various types of handling systems including AGV and its
various guiding technologies. Unit 3: Storage system: Performance, location strategies,
conventional storage methods and equipments, automated storage systems. Unit 4:
Automated manufacturing systems: Components, classification, overview, group
technology and cellular manufacturing, parts classification and coding, product flow
analysis, cellular manufacturing, application considerations in G.T. Unit 5: FMS:
Introduction, components, application, benefits, planning and implementation, transfer
lines and fundamentals of automated production lines, application, analysis of transfer line
without internal storage (numerical problems).
Unit 6: Inspection Technology: Introduction, contact and non-contact conventional
measuring, gauging technique, CMM, surface measurement, machine vision, other optical
inspection techniques, non-contact non-optical inspection technologies versus. Unit 7:
Manufacturing support system: Process planning and concurrent engineering- process
planning, CAPP, CE and design for manufacturing, advanced manufacturing planning,
production planning and control system, master production schedule, MRP.
Unit 8: Capacity planning, shop floor control, inventory control, MRP-II, J.I.T production
systems. lean and agile manufacturing.
Text Books:
1. M.P. Groover, Automation, “Production Systems and Computer Integrated
manufacturing”, 2nd Edition, Pearson Education (2004).
References Books:
1. Vajpayee, “Principles of CIM”, PHI, 1992.
2. Viswanathan and Narahari, “Performance Modeling of Automated Manufacturing
Systems”, PHI, 2000.
3. R.S. Pressman, “Numerical Control and CAM, John Wiley , 1993.
ME 512 Mobile Robotics (3-0-0-6)
Objectives: Mobile robots are now enabling human beings to physically reach and explore
unchartered territories in the Universe. Be a place as distant as Mars, in abysmal depths
of ocean, or shrouded by thick glaciers of Antarctic, mobile robots help exploring
everything; yet this is just the beginning. Even in day to day life autonomous cars hold a
potential to revolutionize transportation and domestic mobile robots help humans in
cleaning, elderly help, etc. National defense is an area replete with the use of mobile
robots. This course will present various aspects of design, fabrication, motion planning,
and control of intelligent mobile robotic systems. The focus of the course is distributed
equally on the computational aspects and practical implementation issues and thereby
leads to a well rounded training. The course will give students an opportunity to design
and fabricate a mobile robotic platform and program it to apply learned theoretical
concepts in practice as a semester long class project.
Syllabus:
Robot locomotion: Types of locomotion, hopping robots, legged robots, wheeled robots,
stability, maneuverability, controllability;
Mobile robot kinematics and dynamics: Forward and inverse kinematics, holonomic and
nonholonomic constraints, kinematic models of simple car and legged robots, dynamics
simulation of mobile robots. Perception: Proprioceptive/Exteroceptive and
passive/active sensors, performance measures of sensors, sensors for mobile robots like
global positioning system (GPS), Doppler effect-based sensors, vision based sensors,
uncertainty in sensing, filtering; Localization: Odometric position estimation, belief
representation, probabilistic mapping, Markov localization, Bayesian localization, Kalman
localization, positioning beacon systems. Introduction to planning and navigation: path
planning algorithms based on A-star, Dijkstra, Voronoi diagrams, probabilistic roadmaps
(PRM), rapidly exploring random trees (RRT), Markov
Decision Processes (MDP), stochastic dynamic programming (SDP);
Robotics Project: Students will work on a semester long project consisting of design,
fabrication, and programming a mobile robotic platform.
Texts Books:
1. Melgar, E. R., Diez, C. C., Arduino and Kinect Projects: Design, Build, Blow Their
Minds, 2012.
2. R. Siegwart, I. R. Nourbakhsh, “Introduction to Autonomous Mobile Robots”, The
MIT Press, 2011.
3. Peter Corke , Robotics, Vision and Control: Fundamental Algorithms in MATLAB,
Springer Tracts in Advanced Robotics, 2011.
ME541 Turbulent Shear Flows (3-0-0-6)
Students who may find this course useful: PhD, M. Tech and 3rd/4th–year B. Tech. Students
from Mechanical, Civil and Chemical Engineering Departments.
Pre-requisite: ME204 (Fluid Mechanics I) of IIT Patna or an equivalent basic course in
Fluid Mechanics
Course Contents:
1. Flow instability and transition to turbulence
2. Nature of turbulence
3. Indicial notation for tensors
4. Fourier transforms and Parseval’s theorem
5. Governing equations of turbulence
6. Eulerian Lagrangian and Fourier descriptions of turbulence
7. Statistical description of turbulence (Reynolds-averaged Navier-Stokes and
Reynolds stress evolution equations)
8. Kolmogorov’s hypotheses
9. Filtered description of turbulence (Bridging methods and large eddy simulation)
10. Boundary layer flow and other important turbulent shear flows (wake, jet, channel
flow, etc.)
11. Development of turbulence closure models (Boussinesq approximation and
Reynolds-stress evolution equation closures)
12. Rapid distortion theory (RDT) of turbulence
Turbulence processes (Cascade, dissipation, material element deformation, mixing, etc.)
Texts Books:
1. Pope, S. B., Turbulent Flows, Cambridge University Press, 2000.
2. Wilcox, D.C., Turbulence Modeling for CFD, D.C.W. Industries, 3rd Edition, 2006.
3. White, F.M., Viscous Fluid Flow, TATA McGraw Hill, 2011
4. Tennekes, H. and Lumley, J.L., A First Course in Turbulence, The MIT Press, 1972.
ME581 Biomechanics and Biomechatronics (3-0-0-6)
Introduction to Biological System, Cell, Tissues and Connective Tissues and their
Phenomenological Models: Bone, Tendon, Cartilage, Smooth Muscle cells, Growth,
Remodeling and Residual Stresses, Circulation system, Neural system and control,
Instrumentation Technique, Therapeutic and Prosthetic Devices and Instrumentation,
Introduction to Biosensor, Experimental Demonstration, Project evaluation and Guest
lecture by Medical Professionals.
Texts Books:
1. Jay D. Humphrey and Sherry DeLange “An Introduction to Biomechanics: Solids
and Fluids, Analysis and Design”, Springer; 1st EditionCarl-Fredrik Mandenius and
Mats Bjorkman “Biomechatronic Design in Biotechnology: A Methodology for
Development of
Biotechnological Products”, Wiley; 1st Edition
2. Stephen C. Cowin and Jay D. Humphrey Edt. , “Cardiovascular Soft Tissue Mechanics
”, Kluwer Academic Publishers
3. L. Gorton Edt. “Biosensors and Modern Biospecific Analytical Techniques” Elsevier
Science; 1st. Edition
4. Y.F. Al-Obaid, F.N. Bangash and T.Bangash, “Trauma - An Engineering Analysis”
Springer; 1st Edition
5. John G. Webster Edt. “Medical Instrumentation: Application and Design”, Wiley;
3rd Edition
ME 554 Rotor Dynamics (3-0-0-6)
Rotor-Bearing Interaction, Flexural Vibration, Critical Speeds of Shafts, Jeffcott Rotor
Model, Unbalance Response, Effect of Damping, Campbell Diagram, Effects of
Anisotropic Bearings, Unbalanced Response of an Asymmetric Shaft, Parametric
Excitation, Gyroscopic Effects, Rotor with Non-central Disc, Rigid-rotor of Flexible
Bearings, Stodola Model, Effect of Spin Speed on Natural Frequency, Forward and
Backward Whirling Motion, Aerodynamic Effects, Instability: Rub, Tangential forces,
Rotor-shaft Continuum, Effect of Rotary Inertia and Shear-Deformation within the
Shaft, Equivalent Discrete System, Finite Element model for Flexural Vibration, Torsional
Vibration, Geared and Branched Systems, Transfer Matrix Model, Fluid Film Bearings:
Steady State Characteristics of Bearings, Reynolds’s Equation, Oil-Whirl, Rigid And
Flexible Rotor Balancing, Active Vibration Control of Rotor-Bearing System: Active
Magnetic Bearing, Condition Monitoring of Rotating Machinery, Measurement
Techniques. Rolling element bearings, Fault diagnosis.
Texts Books:
1. J. S. Rao, Rotor Dynamics, Third ed., New Age, New Delhi, 1996 (2009 reprint).
2. M. J. Goodwin, Dynamics of Rotor-Bearing Systems, Unwin Hyman, Sydney, 1989.
Reference Books:
1. E. Krämmer, Dynamics of Rotors and Foundation, Springer-Verlag, New York, 1993.
2. G. Genta, Dynamics of Rotating Systems, Springer, New York, 2005.
3. J.M. Vance, Rotordynamics of Turbomachinery, Wiley, New York, 1988.
4. M.L. Adams, Rotating machinery vibration: from analysis to troubleshooting, Second
ed., CRC Press, Boca Raton, 2010.
5. J. Kicinski, Rotor dynamics, Tech. Book, New Delhi, 2010.
6. D. Childs, Turbomachinery Rotordynamics: Phenomena, Modeling and Analysis, Wiley,
New York, 1993.
7. Y. Ishida, T. Yamamoto, Linear and Nonlinear Rotordynamics: A Modern Treatment with
Applications, 2nd Edition, Wiley, 2012.
8. J.P. Den Hartog, Mechanical Vibration, Courier Dover Publication, 2013.
ME542 Aerodynamics (3 0 0 6)
Pre-requisites: ME 204, ME 206, ME 305 or equivalent
Review of Fluid Mechanics: Navier-Stokes equations, Potential flows, Concepts of lift and
drag, Boundary layer theory, Application of potential flow and boundary layer theory in
design of airfoils, Turbulence, Compressible flows, Shock and expansion waves,
Incompressible Flow Applications: Incompressible flow over airfoils: Kutta condition,
Kelvin’s circulation theorem, Classical thin airfoil theory, Incompressible flow over finite
wings: Prandtl’s classical lifting line theory, Three-dimensional incompressible flows,
Panel methods and numerical techniques, Wind tunnel experimentation, Dynamic stall,
Delta wings.
Compressible Flow Applications: Introduction to subsonic compressible flow over airfoils,
Supercritical Airfoil, Supersonic flows.
Advanced Applications: Aerodynamics of wing-fuselage system and control surfaces,
Helicopters, Aerodynamics of birds/insects, Micro-air vehicle.
Texts and References
1. J. D. Anderson, Fundamentals of Aerodynamics, McGraw-Hill Inc. (Indian Edition),
2005.
2. Josep Katz and Allen Plotkin, Low-speed aerodynamics, Cambridge University
Press, 2001.
3. Wei Shyy, Yongsheng Lian, Jian Thang, Dragos Viieru and Hao Liu, Aerodynamics
of Low Reynolds Number Flyers, Cambridge University Press, 2009.
4. Holt Ashley and Landhall. M. Aerodynamics of Wings and Bodies. Addison-Wesley
1965.
5. Jones.R.T. Wing Theory. Princeton University Press 1990.
ME546 Multiphase Flow and Heat Transfer (3-0-0-6)
Prerequisites: ME 204 and ME 305, or equivalent
Fundamentals: Introduction to liquid-vapor phase change fundamentals, kinetic theory,
interfacial tension, wettability, boiling, nucleate boiling, critical heat flux and dryout
mechanisms, transition boiling, Leidenfrost, film boiling, nucleation theory, convective flow
boiling fundamentals, flow patterns and regime map, condensation, film-wise
condensation vs. dropwise condensation theory. Devices and applications areas:
introduction to devices and application areas, boilers and condensers, nuclear reactor,
thermosyphons, heat pipes, and vapor chambers. Practical considerations: effect of non-
condensable gas and surface aging. Current trends: Heat transfer coefficient
enhancement techniques, heat and mass transfer at microscopic length scales and gravity
levels, microchannels, modeling techniques
Texts Books:
1. Van Carey. Liquid-Vapor Phase-Change Phenomena, Taylor and Francis: 2nd Edition,
2007, ISBN: 0-89116-836-2, and 1-56032-074-5 Reference Books: 1. Incropera and Dewitt. Fundamentals of Heat and Mass Transfer, Wiley, 6th Edition,
ISBN: 9780471457282
2. Leinhard and Leinhard, A Heat Transfer Textbook, Phlogiston Press, 3rd Edition,
ISBN: 09713835-2-9
ME533 Finite Element Analysis ( 3-0-0-6)
Matrix methods review, Rayleigh-Ritz and Galerkin’s method, weak formulations, FEM
formulation in one dimension, interpolation, Multipoint constraints, applications to solid
mechanics, heat transfer and fluid mechanics problems, Solution to truss and frame
elements, temperature effect, Euler Bernoulli and Timoshenko beam element, C0 and C1
elements, Hermite cubic spline functions, shear locking. Eigen value problem and
applications, semidiscrete FEM models, Time approximation schemes, Problems in 2-D,
plane stress, plane strain, torsion problems, isoparametric formulations, axisymmetric
elements, higher order elements, Serendipity elements, quaterpoint element, hybrid
element, numerical intergration, reduced integration, convergence and accuracy, norms,
modeling consideration, computer implementation: example problems in different fields:
solid mechanics, heat transfer, fluid flow etc. Review of equations of elasticity, velocity
pressure formulation, LMM and PM model, Limitations of FEM.
Text Book:
1. Reddy, J.N., “An Introduction to Finite Element Methods”, 3rd Ed., Tata McGraw-
Hill. 2005.
Reference Books:
1. Zienkiewicz, O. C. “The Finite Element Method, 3rd Edition, Tata McGraw-Hill.
2002.
2. Cook, K.D., Malkus, D.S. and Plesha, M.E., “Concept and Applications of Finite
Element Analysis”, 3th Ed., John Wiley and Sons. 1989.
3. Rao, S.S., “The Finite Element Method in Engineering”, 4th Ed., Elsevier
Science. 2005.
4. Reddy, J.N. and Gartling, D.K “The Finite Element Method in Heat Transfer and
Fluid Dynamics”, 2rd Ed., CRC Press. 2001.
5. Fish, J. and Belytschko, T., “A First Course in Finite Elements”, 1st Ed., John
Wiley and Sons. 2007.
6. Chaskalovic, J., “Finite Element Methods for Engineering Sciences”, 1st Ed.,
Springer.
2008.
7. Bathe, K. J., “Finite Element Procedures”, 1st Ed., Cambridge Press.
ME567 Microfluidics and Microsystems (3-0-0-6)
Introduction: Origin, Definition, Fluid quantity, Benefits, Challenges, Commercial activities. Scaling laws: Scaling in nature, Scaling of physical systems, Trimmer’s vertical bracket notation, limitations. Micro-scale flows: Intermolecular forces, States of matter, Continuum assumption, Governing equations, Constitutive relations, Gas and liquid flows, Boundary conditions, Slip theory, Transition to turbulence, Low Re flows, Entrance effects, Liquid film flow in an inclined plane, Couette flow, Poiseuille flow, Stokes drag on a sphere, Time-dependent
flows, Two-phase flows, Couette flow with slip, Hydraulic resistance and Circuit analysis, Straight channel of different cross-sections, Channels in series and parallel. Capillary flows: Surface tension and interfacial energy, Young-Laplace equation, Contact angle, Capillary length and capillary rise, Interfacial boundary conditions, Marangoni effect. Electrokinetics: Electrohydrodynamics fundamentals, Electro-osmosis, Dielectrophoresis, Electro-capillary effects, Continuous electro-wetting, Direct electro-wetting, Electro-wetting on dielectric. Microfabrication: Materials, Clean room, Silicon crystallography, Miller indices, Oxidation, Photolithography- mask creation, spin coating, exposure and development, Etching, Bulk micromachining, Wafer bonding, Polymer microfabrication: PMMA/COC/PDMS substrates, micromolding, hot embossing, fluidic interconnection. Microfluidics Components: Micropumps, Microvalves, Microflow Sensors, Micromixers, Droplet Generators, Microparticle Separators, Microreactors.
Text/Reference Books
1. Nguyen, N. T., Werely, S. T., Fundamentals and applications of Microfluidics, Artech house
Inc., 2002.
2. Bruus, H., Theoretical Microfluidics, Oxford University Press Inc., 2008.
3. Madou, M. J., Fundamentals of Microfabrication, CRC press, 2002.
4. Tabeling, P., Introduction to microfluidics, Oxford University Press Inc., 2005.
5. Kirby, B.J., Micro- and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices,
Cambridge University Press, 2010.
6. Colin, S., Microfluidics, John Wiley & Sons, 2009.