B G SPIRAL BEVEL GEARBOXES - Brown Europe...
Transcript of B G SPIRAL BEVEL GEARBOXES - Brown Europe...
B GSPIRAL BEVEL GEARBOXES
11111
BG SPIRAL BEVEL GEARBOXESBG SPIRAL BEVEL GEARBOXESBG SPIRAL BEVEL GEARBOXESBG SPIRAL BEVEL GEARBOXESBG SPIRAL BEVEL GEARBOXES
B GSPIRAL BEVEL GEARBOXES
22222
SPECIFICATION
GENERALGENERALGENERALGENERALGENERAL
Spiral bevel gearboxes BG incorporate the most modern advances in bevelgearbox design and construction.
These gearboxes offer an extensive range of ratios together with an excellentpower to size relationship as well as low noise levels even at high speedoperation.
CONSTRUCTION FEACONSTRUCTION FEACONSTRUCTION FEACONSTRUCTION FEACONSTRUCTION FEATURESTURESTURESTURESTURES
- The gearbox which is made in case iron, is of cuboid design withall external faces machined and threaded fixing postions on eachface (usable depth of threaded hole = twice the diameter).
----- The input and output covers and housing are supplied with twolocation spigot diameters (h7) together with threaded fixing holes(except size BG 75) for possible co-axial fixing.
----- The alloy steel spiral bevel gears are cut in the GLEASON system,case hardened, tempered and lapped to the exact mountingposition. Input and output shafts are manufactured in hardenedand tempered steel with all surfaces ground.
- Input and output shaft tolerance (j6). Hollow shaft tolerance (H7).
- All shafts supplied with threaded end to UNI 3221 - DIN 332.
- Keyways to UNI 6604 - DIN 6885.
On request and dependent upon speed type BG spiral bevel gearboxes may beassembled with minimum backlash.
Due to the quality of the gears and machining tolerances and overall efficiencyof between 94% and 97% can be expected.
The modular construction of BG spiral bevel gearboxes permits up to six input/output shafts (except ratio 1:1).
INSTINSTINSTINSTINSTALLALLALLALLALLAAAAATION & MAINTENANCETION & MAINTENANCETION & MAINTENANCETION & MAINTENANCETION & MAINTENANCEask for:
B GB GB GB GB G INFORMATION BOOKLET
LLLLLUBRICAUBRICAUBRICAUBRICAUBRICATIONTIONTIONTIONTION
Before delivery, the gearbox will be filled with the necesary lubricant. Forinput speeds up to 1000 rpm the gearboxes will be grease lubircated, for higherspeeds or on request oil lubrication is available. In this case the gearboxes willbe supplied with a filler/breather plug, level indicator and drain plug.
Motorised Spiral Bevel Gearboxes, Reversing Spiral Bevel Gearboxes andDis-engaging Spiral Bevel Gearboxes are usually oil lubricated.
For high speed and/or high ambient temperature it may be necessary to applyexternal cooling. Please consult our technical department.
RECOMMENDED LUBRICANTRECOMMENDED LUBRICANTRECOMMENDED LUBRICANTRECOMMENDED LUBRICANTRECOMMENDED LUBRICANT
Mobil MOBILUX EP 004 (Mineral Grease)
Mobil MOBILGEAR 630 (Mineral Oil)
The above lubricants are suitable for operation at normal ambienttemperatures -5 deg.C to +40 deg. C. For extreme conditions alternativelubricants are available, these conditions must be specified at time ofordering.
QUANTITY OF LUBRICANTQUANTITY OF LUBRICANTQUANTITY OF LUBRICANTQUANTITY OF LUBRICANTQUANTITY OF LUBRICANT
It is recommended that the oil is changed after the first 500 hours and then afterevery 3000 operating hours.
MAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCE
TTTTThe quantity of lubricant (litres) for each unit size are as shown below:
Size BG12BG12BG12BG12BG12 BG19BG19BG19BG19BG19 BG24BG24BG24BG24BG24 BG32BG32BG32BG32BG32 BG38BG38BG38BG38BG38 BG42BG42BG42BG42BG42 BG55BG55BG55BG55BG55 BG75BG75BG75BG75BG75
Grease 0.15 0.22 0.35 0.9 1.7 3.5 5.5 1 4
Oil 0.1 0.15 0.22 0.6 1.1 2.2 3.6 9
Quantities refer to units type A, ratio 1:1
ORDER CODEORDER CODEORDER CODEORDER CODEORDER CODE
SPIRAL BEVEL GEARBOXESSPIRAL BEVEL GEARBOXESSPIRAL BEVEL GEARBOXESSPIRAL BEVEL GEARBOXESSPIRAL BEVEL GEARBOXES
BBBBB GGGGG 1919191919 AAAAA 1:11:11:11:11:1
BROWNBROWNBROWNBROWNBROWN BEVELBEVELBEVELBEVELBEVEL SIZESIZESIZESIZESIZE ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLYYYYY RRRRRAAAAATIOTIOTIOTIOTIOGROUPGROUPGROUPGROUPGROUP
BBBBB GGGGG 1919191919 MMMMM AAAAA 2:12:12:12:12:1 IEC 63IEC 63IEC 63IEC 63IEC 63
BROWNBROWNBROWNBROWNBROWN BEVELBEVELBEVELBEVELBEVEL SIZESIZESIZESIZESIZE MOTORISEDMOTORISEDMOTORISEDMOTORISEDMOTORISED ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLYYYYY RRRRRAAAAATIOTIOTIOTIOTIO MOTORMOTORMOTORMOTORMOTORGROUPGROUPGROUPGROUPGROUP INPUTINPUTINPUTINPUTINPUT
SPIRAL BEVEL GEARBOXES WITH IEC MOTOR FLANGE ADAPTORSPIRAL BEVEL GEARBOXES WITH IEC MOTOR FLANGE ADAPTORSPIRAL BEVEL GEARBOXES WITH IEC MOTOR FLANGE ADAPTORSPIRAL BEVEL GEARBOXES WITH IEC MOTOR FLANGE ADAPTORSPIRAL BEVEL GEARBOXES WITH IEC MOTOR FLANGE ADAPTOR
B GSPIRAL BEVEL GEARBOXES
33333
TECHNICAL INFORMATION
LLLLLUBRICAUBRICAUBRICAUBRICAUBRICATIONTIONTIONTIONTIONThe selections assume the following conditions:
Life 20,000 hoursPrime Mover Electric MotorShock Factor Uniform Load (1)Shaft Rotation One directionRunning time 8 hours per dayStar t Factor 1 start per hourAmbient Conditions Temperature +20 deg.CAltitude < 1,000 metres above sea level
Duty Factor K1When working conditions are different from those above, duty factors must beconsidered.
K1 = fr . fL. fBK1 = fr . fL. fBK1 = fr . fL. fBK1 = fr . fL. fBK1 = fr . fL. fB
Running Time Factor frRunning Time Factor frRunning Time Factor frRunning Time Factor frRunning Time Factor fr
Hours/DayHours/DayHours/DayHours/DayHours/Day 2 42 42 42 42 4 1 81 81 81 81 8 1 21 21 21 21 2 88888 44444 22222 11111
f rf rf rf rf r 1.251.251.251.251.25 1.181.181.181.181.18 1.11.11.11.11.1 11111 0.90.90.90.90.9 0.80.80.80.80.8 0.70.70.70.70.7
Theoretical LifeTheoretical LifeTheoretical LifeTheoretical LifeTheoretical Life 6000060000600006000060000 4000040000400004000040000 2000020000200002000020000 1500015000150001500015000 1000010000100001000010000 50005000500050005000 30003000300030003000
fLfLfLfLfL 1.31.31.31.31.3 1.151.151.151.151.15 11111 0.950.950.950.950.95 0.90.90.90.90.9 0.850.850.850.850.85 0.80.80.80.80.8
Life Factor fL (Hours)Life Factor fL (Hours)Life Factor fL (Hours)Life Factor fL (Hours)Life Factor fL (Hours)
Shock Factor fBShock Factor fBShock Factor fBShock Factor fBShock Factor fB
No. of Starts per Hour
Irregular 1 5 2 0 6 0 120
Uniform 1 1 1.4 1.8 2.2 2.7
Moderate Shock 1 1.4 1.8 2.2 2.7 3.2
Heavy Shock 1.4 1.8 2.2 2.7 3.2 3.8
The required output torque Mreq will be multiplied for the above mentionedfactors to obtain the value of torque M2 used to select a spiral bevel gearboxof the correct size.
M2 > Mreq x K1
Thermal Factor KrThermal Factor KrThermal Factor KrThermal Factor KrThermal Factor KrThe thermal rating is that power that can be applied at the input of the bevelgearboxes, working continuously at an ambient temperature of 20 deg.C, suchas to maintain the lubrication temperature under 100 deg.C.
Size BG12BG12BG12BG12BG12 BG19BG19BG19BG19BG19 BG24BG24BG24BG24BG24 BG32BG32BG32BG32BG32 BG38BG38BG38BG38BG38 BG42BG42BG42BG42BG42 BG55BG55BG55BG55BG55 BG75BG75BG75BG75BG75
KT KW 1.5 3 6 1 0 1 6 2 0 3 5 6 0
Input rpm 2800 2800 2800 2800 2000 2000 1500 1000
Maximum Thermal Input kW KTMaximum Thermal Input kW KTMaximum Thermal Input kW KTMaximum Thermal Input kW KTMaximum Thermal Input kW KT
When conditions are different from those above it will be necessary to considerthe following factors:
Ambient TAmbient TAmbient TAmbient TAmbient Temperature Femperature Femperature Femperature Femperature Factor fAactor fAactor fAactor fAactor fA
TTTTTemp emp emp emp emp oooooCCCCC - 1 0- 1 0- 1 0- 1 0- 1 0 00000 1 01 01 01 01 0 2 02 02 02 02 0 3 03 03 03 03 0 4 04 04 04 04 0 5 05 05 05 05 0
fAfAfAfAfA 1.31.31.31.31.3 1.251.251.251.251.25 1.151.151.151.151.15 11111 0.90.90.90.90.9 0.80.80.80.80.8 0.70.70.70.70.7
100100100100100 8 08 08 08 08 0 6 06 06 06 06 0 4 04 04 04 04 0 2 02 02 02 02 0
fDfDfDfDfD 11111 1.21.21.21.21.2 1.41.41.41.41.4 1.61.61.61.61.6 1.81.81.81.81.8
Running Time Factor fDRunning Time Factor fDRunning Time Factor fDRunning Time Factor fDRunning Time Factor fD
% Running% Running% Running% Running% RunningTime FactorTime FactorTime FactorTime FactorTime Factor
TTTTThermal rating KT should be multiplied by the above factors to obtaint he actualthermal rating KT ACTUAL.....
KT ACTUAL = KT x fA x fDKT ACTUAL = KT x fA x fDKT ACTUAL = KT x fA x fDKT ACTUAL = KT x fA x fDKT ACTUAL = KT x fA x fD
When the continuous absorbed rating in the bevel gearbox (KT ACTUAL) is overthe actual thermal rating (KT), excess heat must be removed by artificialcooling.
B GSPIRAL BEVEL GEARBOXES
44444
INPUT AND OUTPUT SHAFT LOADSINPUT AND OUTPUT SHAFT LOADSINPUT AND OUTPUT SHAFT LOADSINPUT AND OUTPUT SHAFT LOADSINPUT AND OUTPUT SHAFT LOADS
Input ShafInput ShafInput ShafInput ShafInput Shaft Pt Pt Pt Pt Prrrrr..... Output Shaft PROutput Shaft PROutput Shaft PROutput Shaft PROutput Shaft PR
RatioRatioRatioRatioRatio RatioRatioRatioRatioRatio Al lA l lA l lA l lA l l
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE 1:11:11:11:11:1 2:12:12:12:12:1 3:13:13:13:13:1 4:14:14:14:14:1 5:15:15:15:15:1 Ratio'sRatio'sRatio'sRatio'sRatio's
BG12BG12BG12BG12BG12 550550550550550 ----- 900900900900900BG19BG19BG19BG19BG19 850850850850850 600600600600600 15001500150015001500B G 2 4B G 2 4B G 2 4B G 2 4B G 2 4 14001400140014001400 850850850850850 22002200220022002200B G 3 2B G 3 2B G 3 2B G 3 2B G 3 2 20002000200020002000 14001400140014001400 35003500350035003500BG38BG38BG38BG38BG38 40004000400040004000 20002000200020002000 70007000700070007000BG42BG42BG42BG42BG42 60006000600060006000 40004000400040004000 1000010000100001000010000BG55BG55BG55BG55BG55 1000010000100001000010000 60006000600060006000 1500015000150001500015000BG75BG75BG75BG75BG75 2500025000250002500025000 1000010000100001000010000 3500035000350003500035000
Output Shaft PAOutput Shaft PAOutput Shaft PAOutput Shaft PAOutput Shaft PA
TTTTTaper Raper Raper Raper Raper Roller Bearingoller Bearingoller Bearingoller Bearingoller Bearing Ball BearingBall BearingBall BearingBall BearingBall Bearing TTTTTaper Raper Raper Raper Raper Roller Bearingoller Bearingoller Bearingoller Bearingoller Bearing
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE RatioRatioRatioRatioRatio RatioRatioRatioRatioRatio RatioRatioRatioRatioRatio RatioRatioRatioRatioRatio All Ratio'sAll Ratio'sAll Ratio'sAll Ratio'sAll Ratio's All Ratio'sAll Ratio'sAll Ratio'sAll Ratio'sAll Ratio's
1:11:11:11:11:1 2:12:12:12:12:1 3:13:13:13:13:1 4:14:14:14:14:1 5:15:15:15:15:1 1:11:11:11:11:1 2:12:12:12:12:1 3:13:13:13:13:1 4:14:14:14:14:1 5:15:15:15:15:1
BG12BG12BG12BG12BG12 300300300300300 ----- 500500500500500 -----BG19BG19BG19BG19BG19 450450450450450 400400400400400 650650650650650 450450450450450 700700700700700 10001000100010001000BG24BG24BG24BG24BG24 700700700700700 450450450450450 10001000100010001000 650650650650650 13001300130013001300 18001800180018001800BG32BG32BG32BG32BG32 11001100110011001100 700700700700700 15001500150015001500 10001000100010001000 17001700170017001700 25002500250025002500BG38BG38BG38BG38BG38 17001700170017001700 11001100110011001100 24002400240024002400 15001500150015001500 34003400340034003400 50005000500050005000BG42BG42BG42BG42BG42 27002700270027002700 17001700170017001700 40004000400040004000 24002400240024002400 48004800480048004800 70007000700070007000BG55BG55BG55BG55BG55 50005000500050005000 27002700270027002700 78007800780078007800 40004000400040004000 68006800680068006800 1000010000100001000010000BG75BG75BG75BG75BG75 1000010000100001000010000 50005000500050005000 1600016000160001600016000 78007800780078007800 1500015000150001500015000 2200022000220002200022000
Ball BearingBall BearingBall BearingBall BearingBall Bearing
Input Shaft Pa.Input Shaft Pa.Input Shaft Pa.Input Shaft Pa.Input Shaft Pa.
Input Speed 1500 rpm
Input Speed 1500 rpm
RADIAL LOADS (N)RADIAL LOADS (N)RADIAL LOADS (N)RADIAL LOADS (N)RADIAL LOADS (N)
AXIAL LOADS (N)AXIAL LOADS (N)AXIAL LOADS (N)AXIAL LOADS (N)AXIAL LOADS (N)
All standard units are fitted with ball bearingsAll standard units are fitted with ball bearingsAll standard units are fitted with ball bearingsAll standard units are fitted with ball bearingsAll standard units are fitted with ball bearings
B GSPIRAL BEVEL GEARBOXES
55555
ASSEMBLY, SHAFT ROTATION & HANDING
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY OPTIONSY OPTIONSY OPTIONSY OPTIONSY OPTIONS
AssemblyAssemblyAssemblyAssemblyAssembly DescriptionDescriptionDescriptionDescriptionDescription
Slow ShaftSlow ShaftSlow ShaftSlow ShaftSlow Shaftdouble projectiondouble projectiondouble projectiondouble projectiondouble projection
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1. 5:14:1. 5:14:1. 5:14:1. 5:14:1. 5:1
Slow ShaftSlow ShaftSlow ShaftSlow ShaftSlow Shaftsingle projectionsingle projectionsingle projectionsingle projectionsingle projection
RatioRatioRatioRatioRatio 1:1, 2:1, 3:1 1:1, 2:1, 3:1 1:1, 2:1, 3:1 1:1, 2:1, 3:1 1:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Slow ShaftSlow ShaftSlow ShaftSlow ShaftSlow Shaftsingle projectionsingle projectionsingle projectionsingle projectionsingle projection
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Speed IncreaseSpeed IncreaseSpeed IncreaseSpeed IncreaseSpeed Increase
RatioRatioRatioRatioRatio1:1.51:1.51:1.51:1.51:1.51:21:21:21:21:2
ReinforcedReinforcedReinforcedReinforcedReinforcedslow shaftslow shaftslow shaftslow shaftslow shaft
double projectiondouble projectiondouble projectiondouble projectiondouble projection
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Slow ShaftSlow ShaftSlow ShaftSlow ShaftSlow Shaftsingle projectionsingle projectionsingle projectionsingle projectionsingle projection
with bearing housingwith bearing housingwith bearing housingwith bearing housingwith bearing housing
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Counter rotatingCounter rotatingCounter rotatingCounter rotatingCounter rotatingslow shaftslow shaftslow shaftslow shaftslow shaft
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Counter rotatingCounter rotatingCounter rotatingCounter rotatingCounter rotatingspeed increasespeed increasespeed increasespeed increasespeed increase
RatioRatioRatioRatioRatio1:2, 1:3, 1:4, 1:51:2, 1:3, 1:4, 1:51:2, 1:3, 1:4, 1:51:2, 1:3, 1:4, 1:51:2, 1:3, 1:4, 1:5
AssemblyAssemblyAssemblyAssemblyAssembly DescriptionDescriptionDescriptionDescriptionDescription
Slow Shaft double projectionSlow Shaft double projectionSlow Shaft double projectionSlow Shaft double projectionSlow Shaft double projection2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1 5:14:1 5:14:1 5:14:1 5:14:1 5:1
Slow Shaft single projectionSlow Shaft single projectionSlow Shaft single projectionSlow Shaft single projectionSlow Shaft single projection2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Slow Shaft singe projectionSlow Shaft singe projectionSlow Shaft singe projectionSlow Shaft singe projectionSlow Shaft singe projection2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
HollowHollowHollowHollowHollowSlow ShaftSlow ShaftSlow ShaftSlow ShaftSlow Shaft
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
Hollow Slow ShaftHollow Slow ShaftHollow Slow ShaftHollow Slow ShaftHollow Slow Shaft2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating2 fast shafts counter rotating
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
IECIECIECIECIECMotor flangeMotor flangeMotor flangeMotor flangeMotor flange
adaptoradaptoradaptoradaptoradaptor
RatioRatioRatioRatioRatio1:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:11:1, 2:1, 3:1
4:1, 5:14:1, 5:14:1, 5:14:1, 5:14:1, 5:1
90 deg. reversing gear Assembly IO90 deg. reversing gear Assembly IO90 deg. reversing gear Assembly IO90 deg. reversing gear Assembly IO90 deg. reversing gear Assembly IO
andandandandand
dis-engaging gear Assembly DOdis-engaging gear Assembly DOdis-engaging gear Assembly DOdis-engaging gear Assembly DOdis-engaging gear Assembly DO
RatioRatioRatioRatioRatio1:1, 2:11:1, 2:11:1, 2:11:1, 2:11:1, 2:1
Co-axialCo-axialCo-axialCo-axialCo-axialreversing gearreversing gearreversing gearreversing gearreversing gear
RatioRatioRatioRatioRatio1:11:11:11:11:1
AAAAA
ASASASASAS
ADADADADAD
AXAXAXAXAX
APAPAPAPAP
CCCCC
DRDRDRDRDR
DXDXDXDXDX
BBBBB
BSBSBSBSBS
BDBDBDBDBD
AHAHAHAHAH
BHBHBHBHBH
MMMMM
IOIOIOIOIODODODODODO
ICICICICIC
B GSPIRAL BEVEL GEARBOXES
66666
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE InputInputInputInputInput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput WeightWeightWeightWeightWeight DimensionsDimensionsDimensionsDimensionsDimensionsrpmrpmrpmrpmrpm kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque PagePagePagePagePage
NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm KgKgKgKgKg
28002800280028002800 3.03.03.03.03.0 10.110.110.110.110.1 1.61.61.61.61.6 10.610.610.610.610.6 0.60.60.60.60.6 5.85.85.85.85.820002000200020002000 2.22.22.22.22.2 10.610.610.610.610.6 1.21.21.21.21.2 10.910.910.910.910.9 0.40.40.40.40.4 6.36.36.36.36.315001500150015001500 1.81.81.81.81.8 11.511.511.511.511.5 0.90.90.90.90.9 11.511.511.511.511.5 0.40.40.40.40.4 6.96.96.96.96.910001000100010001000 1.31.31.31.31.3 12.512.512.512.512.5 0.70.70.70.70.7 12.512.512.512.512.5 0.30.30.30.30.3 7.57.57.57.57.5800800800800800 1 . 11 . 11 . 11 . 11 . 1 13.413.413.413.413.4 0 . 60 . 60 . 60 . 60 . 6 13.413.413.413.413.4 0 . 20 . 20 . 20 . 20 . 2 8 . 18 . 18 . 18 . 18 . 1 2 . 52 . 52 . 52 . 52 . 5 8/128/128/128/128/12600600600600600 0 . 90 . 90 . 90 . 90 . 9 14.414.414.414.414.4 0 . 50 . 50 . 50 . 50 . 5 14.414.414.414.414.4 0 . 20 . 20 . 20 . 20 . 2 8 . 68 . 68 . 68 . 68 . 6400400400400400 0.60.60.60.60.6 15.415.415.415.415.4 0.30.30.30.30.3 15.415.415.415.415.4 0.10.10.10.10.1 6.06.06.06.06.0100100100100100 0.20.20.20.20.2 16.816.816.816.816.8 0.10.10.10.10.1 16.716.716.716.716.7 0.00.00.00.00.0 9.59.59.59.59.55 05 05 05 05 0 0.10.10.10.10.1 18.218.218.218.218.2 0.040.040.040.040.04 18.218.218.218.218.2 0.00.00.00.00.0 9.89.89.89.89.81 01 01 01 01 0 0.020.020.020.020.02 19.219.219.219.219.2 0.010.010.010.010.01 19.219.219.219.219.2 0.00.00.00.00.0 10.110.110.110.110.1
28002800280028002800 31.131.131.131.131.1 105.4105.4105.4105.4105.4 10.310.310.310.310.3 52.252.252.252.252.2 9.09.09.09.09.0 60.960.960.960.960.9 3.43.43.43.43.4 34.334.334.334.334.3 2.92.92.92.92.9 39.339.339.339.339.3 1.81.81.81.81.8 31.231.231.231.231.220002000200020002000 22.822.822.822.822.8 108.2108.2108.2108.2108.2 7.57.57.57.57.5 53.453.453.453.453.4 6.56.56.56.56.5 62.062.062.062.062.0 2.52.52.52.52.5 34.934.934.934.934.9 2.12.12.12.12.1 39.739.739.739.739.7 1.31.31.31.31.3 31.731.731.731.731.715001500150015001500 17.517.517.517.517.5 110.9110.9110.9110.9110.9 5.75.75.75.75.7 54.454.454.454.454.4 5.05.05.05.05.0 62.962.962.962.962.9 1.91.91.91.91.9 35.535.535.535.535.5 1.61.61.61.61.6 40.040.040.040.040.0 1.01.01.01.01.0 32.032.032.032.032.010001000100010001000 12.012.012.012.012.0 113.5113.5113.5113.5113.5 3.93.93.93.93.9 55.755.755.755.755.7 3.43.43.43.43.4 64.564.564.564.564.5 1.31.31.31.31.3 36.136.136.136.136.1 1.11.11.11.11.1 40.940.940.940.940.9 0.70.70.70.70.7 32.532.532.532.532.5800800800800800 9 . 79 . 79 . 79 . 79 . 7 114.9114.9114.9114.9114.9 3 . 23 . 23 . 23 . 23 . 2 56.356.356.356.356.3 2 . 82 . 82 . 82 . 82 . 8 65.365.365.365.365.3 1 . 01 . 01 . 01 . 01 . 0 36.536.536.536.536.5 0 . 90 . 90 . 90 . 90 . 9 41.341.341.341.341.3 0 . 60 . 60 . 60 . 60 . 6 32.732.732.732.732.7 6 . 06 . 06 . 06 . 06 . 0 8/128/128/128/128/12600600600600600 7 . 47 . 47 . 47 . 47 . 4 116.2116.2116.2116.2116.2 2 . 42 . 42 . 42 . 42 . 4 57.157.157.157.157.1 2 . 12 . 12 . 12 . 12 . 1 65.965.965.965.965.9 0 . 80 . 80 . 80 . 80 . 8 36.836.836.836.836.8 0 . 70 . 70 . 70 . 70 . 7 41.641.641.641.641.6 0 . 40 . 40 . 40 . 40 . 4 32.932.932.932.932.9400400400400400 5.05.05.05.05.0 118.7118.7118.7118.7118.7 1.61.61.61.61.6 57.857.857.857.857.8 1.41.41.41.41.4 66.766.766.766.766.7 0.50.50.50.50.5 37.437.437.437.437.4 0.40.40.40.40.4 42.042.042.042.042.0 0.30.30.30.30.3 33.233.233.233.233.2100100100100100 1.31.31.31.31.3 124.4124.4124.4124.4124.4 0.40.40.40.40.4 59.859.859.859.859.8 0.40.40.40.40.4 69.769.769.769.769.7 0.10.10.10.10.1 38.438.438.438.438.4 0.10.10.10.10.1 43.043.043.043.043.0 0.10.10.10.10.1 33.933.933.933.933.95 05 05 05 05 0 0.70.70.70.70.7 126.1126.1126.1126.1126.1 0.20.20.20.20.2 60.760.760.760.760.7 0.20.20.20.20.2 70.570.570.570.570.5 0.10.10.10.10.1 38.638.638.638.638.6 0.10.10.10.10.1 43.343.343.343.343.3 0.030.030.030.030.03 34.134.134.134.134.11 01 01 01 01 0 0.10.10.10.10.1 127.8127.8127.8127.8127.8 0.050.050.050.050.05 61.361.361.361.361.3 0.030.030.030.030.03 71.171.171.171.171.1 0.00.00.00.00.0 38.938.938.938.938.9 0.00.00.00.00.0 43.743.743.743.743.7 0.00.00.00.00.0 34.434.434.434.434.4
28002800280028002800 33.633.633.633.633.6 113.7113.7113.7113.7113.7 17.017.017.017.017.0 86.586.586.586.586.5 11.411.411.411.411.4 77.277.277.277.277.2 4.94.94.94.94.9 50.050.050.050.050.0 5.55.55.55.55.5 73.973.973.973.973.9 3.63.63.63.63.6 60.760.760.760.760.720002000200020002000 25.125.125.125.125.1 119.1119.1119.1119.1119.1 12.412.412.412.412.4 88.388.388.388.388.3 8.48.48.48.48.4 79.479.479.479.479.4 3.63.63.63.63.6 51.251.251.251.251.2 4.04.04.04.04.0 75.375.375.375.375.3 2.72.72.72.72.7 64.064.064.064.064.015001500150015001500 19.519.519.519.519.5 123.0123.0123.0123.0123.0 9.59.59.59.59.5 90.090.090.090.090.0 6.46.46.46.46.4 80.580.580.580.580.5 2.72.72.72.72.7 52.052.052.052.052.0 3.03.03.03.03.0 76.476.476.476.476.4 2.12.12.12.12.1 65.065.065.065.065.010001000100010001000 13.513.513.513.513.5 128.1128.1128.1128.1128.1 6.56.56.56.56.5 92.592.592.592.592.5 4.34.34.34.34.3 81.981.981.981.981.9 1.91.91.91.91.9 52.952.952.952.952.9 2.12.12.12.12.1 77.877.877.877.877.8 1.41.41.41.41.4 66.066.066.066.066.0800800800800800 11.011.011.011.011.0 130.5130.5130.5130.5130.5 6 . 26 . 26 . 26 . 26 . 2 93.393.393.393.393.3 3 . 53 . 53 . 53 . 53 . 5 82.882.882.882.882.8 1 . 51 . 51 . 51 . 51 . 5 53.753.753.753.753.7 1 . 71 . 71 . 71 . 71 . 7 78.478.478.478.478.4 1 . 11 . 11 . 11 . 11 . 1 66.766.766.766.766.7 1 21 21 21 21 2 8/128/128/128/128/12600600600600600 8 . 58 . 58 . 58 . 58 . 5 133.9133.9133.9133.9133.9 4 . 04 . 04 . 04 . 04 . 0 95.095.095.095.095.0 2 . 62 . 62 . 62 . 62 . 6 83.683.683.683.683.6 1 . 11 . 11 . 11 . 11 . 1 54.154.154.154.154.1 1 . 31 . 31 . 31 . 31 . 3 79.279.279.279.279.2 0 . 90 . 90 . 90 . 90 . 9 68.768.768.768.768.7400400400400400 5.85.85.85.85.8 137.0137.0137.0137.0137.0 2.72.72.72.72.7 96.596.596.596.596.5 1.81.81.81.81.8 84.784.784.784.784.7 0.80.80.80.80.8 55.055.055.055.055.0 0.80.80.80.80.8 80.080.080.080.080.0 0.60.60.60.60.6 69.369.369.369.369.3100100100100100 1.51.51.51.51.5 146.2146.2146.2146.2146.2 0.70.70.70.70.7 100.0100.0100.0100.0100.0 0.40.40.40.40.4 85.385.385.385.385.3 0.20.20.20.20.2 56.256.256.256.256.2 0.20.20.20.20.2 81.181.181.181.181.1 0.20.20.20.20.2 71.371.371.371.371.35 05 05 05 05 0 0.80.80.80.80.8 149.5149.5149.5149.5149.5 0.40.40.40.40.4 101.3101.3101.3101.3101.3 0.20.20.20.20.2 85.585.585.585.585.5 0.10.10.10.10.1 56.456.456.456.456.4 0.10.10.10.10.1 82.582.582.582.582.5 0.10.10.10.10.1 72.072.072.072.072.01 01 01 01 01 0 0 . 20 . 20 . 20 . 20 . 2 154.4154.4154.4154.4154.4 0 . 10 . 10 . 10 . 10 . 1 102.9102.9102.9102.9102.9 0 . 00 . 00 . 00 . 00 . 0 86.186.186.186.186.1 0 . 00 . 00 . 00 . 00 . 0 56.656.656.656.656.6 0 . 00 . 00 . 00 . 00 . 0 83.483.483.483.483.4 0 . 00 . 00 . 00 . 00 . 0 73.373.373.373.373.3
28002800280028002800 78.278.278.278.278.2 264.8264.8264.8264.8264.8 33.133.133.133.133.1 168.1168.1168.1168.1168.1 22.122.122.122.122.1 149.9149.9149.9149.9149.9 10.410.410.410.410.4 105.3105.3105.3105.3105.3 7.37.37.37.37.3 98.898.898.898.898.8 5.05.05.05.05.0 84.184.184.184.184.120002000200020002000 58.358.358.358.358.3 276.3276.3276.3276.3276.3 24.824.824.824.824.8 176.6176.6176.6176.6176.6 16.416.416.416.416.4 155.5155.5155.5155.5155.5 8.18.18.18.18.1 115.9115.9115.9115.9115.9 5.65.65.65.65.6 105.5105.5105.5105.5105.5 3.73.73.73.73.7 88.388.388.388.388.315001500150015001500 45.245.245.245.245.2 285.8285.8285.8285.8285.8 19.319.319.319.319.3 182.9182.9182.9182.9182.9 12.512.512.512.512.5 158.4158.4158.4158.4158.4 6.26.26.26.26.2 118.0118.0118.0118.0118.0 4.24.24.24.24.2 106.8106.8106.8106.8106.8 2.82.82.82.82.8 89.789.789.789.789.710001000100010001000 31.331.331.331.331.3 297.2297.2297.2297.2297.2 13.313.313.313.313.3 189.2189.2189.2189.2189.2 8.58.58.58.58.5 161.2161.2161.2161.2161.2 4.24.24.24.24.2 120.1120.1120.1120.1120.1 2.82.82.82.82.8 108.1108.1108.1108.1108.1 1.91.91.91.91.9 91.191.191.191.191.1800800800800800 25.625.625.625.625.6 302.9302.9302.9302.9302.9 11.011.011.011.011.0 195.5195.5195.5195.5195.5 6 . 96 . 96 . 96 . 96 . 9 164.0164.0164.0164.0164.0 3 . 43 . 43 . 43 . 43 . 4 122.2122.2122.2122.2122.2 2 . 32 . 32 . 32 . 32 . 3 109.5109.5109.5109.5109.5 1 . 61 . 61 . 61 . 61 . 6 92.592.592.592.592.5 2 22 22 22 22 2 8/128/128/128/128/12600600600600600 19.619.619.619.619.6 310.5310.5310.5310.5310.5 8 . 48 . 48 . 48 . 48 . 4 199.7199.7199.7199.7199.7 5 . 35 . 35 . 35 . 35 . 3 166.8166.8166.8166.8166.8 2 . 62 . 62 . 62 . 62 . 6 124.3124.3124.3124.3124.3 1 . 81 . 81 . 81 . 81 . 8 110.8110.8110.8110.8110.8 1 . 21 . 21 . 21 . 21 . 2 94.694.694.694.694.6400400400400400 13.413.413.413.413.4 318.2318.2318.2318.2318.2 5.85.85.85.85.8 206.0206.0206.0206.0206.0 3.63.63.63.63.6 169.7169.7169.7169.7169.7 1.81.81.81.81.8 126.4126.4126.4126.4126.4 1.21.21.21.21.2 112.1112.1112.1112.1112.1 0.80.80.80.80.8 96.096.096.096.096.0100100100100100 3.63.63.63.63.6 339.1339.1339.1339.1339.1 1.51.51.51.51.5 210.2210.2210.2210.2210.2 0.90.90.90.90.9 175.3175.3175.3175.3175.3 0.50.50.50.50.5 130.6130.6130.6130.6130.6 0.30.30.30.30.3 117.5117.5117.5117.5117.5 0.20.20.20.20.2 98.198.198.198.198.15 05 05 05 05 0 1.81.81.81.81.8 346.7346.7346.7346.7346.7 0.80.80.80.80.8 214.4214.4214.4214.4214.4 0.50.50.50.50.5 181.0181.0181.0181.0181.0 0.20.20.20.20.2 132.7132.7132.7132.7132.7 0.20.20.20.20.2 120.1120.1120.1120.1120.1 0.10.10.10.10.1 99.599.599.599.599.51 01 01 01 01 0 0.40.40.40.40.4 358.2358.2358.2358.2358.2 0.20.20.20.20.2 218.6218.6218.6218.6218.6 0.10.10.10.10.1 183.8183.8183.8183.8183.8 0.00.00.00.00.0 134.8134.8134.8134.8134.8 0.00.00.00.00.0 122.8122.8122.8122.8122.8 0.00.00.00.00.0 100.9100.9100.9100.9100.9
28002800280028002800 132.9132.9132.9132.9132.9 450.2450.2450.2450.2450.2 69.969.969.969.969.9 355.2355.2355.2355.2355.2 39.439.439.439.439.4 266.7266.7266.7266.7266.7 19.919.919.919.919.9 202.1202.1202.1202.1202.1 15.315.315.315.315.3 207.9207.9207.9207.9207.9 11.111.111.111.111.1 187.8187.8187.8187.8187.820002000200020002000 97.697.697.697.697.6 463.1463.1463.1463.1463.1 51.651.651.651.651.6 366.9366.9366.9366.9366.9 28.928.928.928.928.9 274.2274.2274.2274.2274.2 14.514.514.514.514.5 206.4206.4206.4206.4206.4 11.211.211.211.211.2 211.9211.9211.9211.9211.9 8.18.18.18.18.1 191.7191.7191.7191.7191.715001500150015001500 75.375.375.375.375.3 475.9475.9475.9475.9475.9 39.639.639.639.639.6 375.2375.2375.2375.2375.2 22.222.222.222.222.2 280.9280.9280.9280.9280.9 11.011.011.011.011.0 209.4209.4209.4209.4209.4 8.68.68.68.68.6 216.3216.3216.3216.3216.3 6.26.26.26.26.2 195.1195.1195.1195.1195.110001000100010001000 51.551.551.551.551.5 488.8488.8488.8488.8488.8 27.227.227.227.227.2 386.9386.9386.9386.9386.9 15.215.215.215.215.2 288.5288.5288.5288.5288.5 7.67.67.67.67.6 215.4215.4215.4215.4215.4 5.85.85.85.85.8 220.8220.8220.8220.8220.8 4.24.24.24.24.2 197.8197.8197.8197.8197.8800800800800800 42.142.142.142.142.1 499.1499.1499.1499.1499.1 22.122.122.122.122.1 392.7392.7392.7392.7392.7 12.312.312.312.312.3 292.5292.5292.5292.5292.5 6 . 16 . 16 . 16 . 16 . 1 218.1218.1218.1218.1218.1 4 . 74 . 74 . 74 . 74 . 7 223.0223.0223.0223.0223.0 3 . 43 . 43 . 43 . 43 . 4 199.5199.5199.5199.5199.5 3 73 73 73 73 7 8/128/128/128/128/12600600600600600 32.232.232.232.232.2 509.4509.4509.4509.4509.4 16.816.816.816.816.8 398.6398.6398.6398.6398.6 9 . 49 . 49 . 49 . 49 . 4 296.9296.9296.9296.9296.9 4 . 74 . 74 . 74 . 74 . 7 221.1221.1221.1221.1221.1 3 . 63 . 63 . 63 . 63 . 6 225.2225.2225.2225.2225.2 2 . 62 . 62 . 62 . 62 . 6 201.7201.7201.7201.7201.7400400400400400 22.022.022.022.022.0 522.2522.2522.2522.2522.2 11.511.511.511.511.5 408.6408.6408.6408.6408.6 6.46.46.46.46.4 302.2302.2302.2302.2302.2 3.13.13.13.13.1 224.1224.1224.1224.1224.1 2.42.42.42.42.4 228.7228.7228.7228.7228.7 1.71.71.71.71.7 204.5204.5204.5204.5204.5100100100100100 5.85.85.85.85.8 550.5550.5550.5550.5550.5 3.03.03.03.03.0 428.6428.6428.6428.6428.6 1.71.71.71.71.7 314.9314.9314.9314.9314.9 0.80.80.80.80.8 232.1232.1232.1232.1232.1 0.60.60.60.60.6 236.3236.3236.3236.3236.3 0.40.40.40.40.4 211.2211.2211.2211.2211.25 05 05 05 05 0 3.03.03.03.03.0 562.1562.1562.1562.1562.1 1.51.51.51.51.5 435.2435.2435.2435.2435.2 0.80.80.80.80.8 319.1319.1319.1319.1319.1 0.40.40.40.40.4 234.4234.4234.4234.4234.4 0.30.30.30.30.3 238.5238.5238.5238.5238.5 0.20.20.20.20.2 212.8212.8212.8212.8212.81 01 01 01 01 0 0.60.60.60.60.6 578.8578.8578.8578.8578.8 0.30.30.30.30.3 443.6443.6443.6443.6443.6 0.20.20.20.20.2 324.9324.9324.9324.9324.9 0.10.10.10.10.1 238.0238.0238.0238.0238.0 0.10.10.10.10.1 242.1242.1242.1242.1242.1 0.00.00.00.00.0 215.6215.6215.6215.6215.6
RATIO 1:1 RATIO 1.5:1 RATIO 2:1 RATIO 3:1 RATIO 4:1 RATIO 5:1
BG 12
BG 19
BG 24
BG 32
BG 38
SELECTION
B GSPIRAL BEVEL GEARBOXES
77777
SELECTION
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE InputInputInputInputInput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput InputInputInputInputInput OutputOutputOutputOutputOutput WeightWeightWeightWeightWeight DimensionsDimensionsDimensionsDimensionsDimensionsrpmrpmrpmrpmrpm kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque kWkWkWkWkW TTTTTorqueorqueorqueorqueorque PagePagePagePagePage
NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm NmNmNmNmNm KgKgKgKgKg
2800 166.1 562.8 87.4 444.0 49.2 333.3 24.9 252.6 19.2 259.8 13.9 234.82000 122.1 578.8 64.5 458.6 36.1 342.8 18.1 258.0 14.0 264.8 10.1 239.71500 94.1 594.9 49.4 469.0 27.8 351.1 13.8 261.8 10.7 270.4 7.7 243.81000 64.4 611.0 34.0 483.6 19.0 360.6 9.5 269.3 7.3 275.9 5.2 247.3800 52.6 623.9 27.6 490.9 15.4 365.6 7.7 272.6 5.9 278.7 4.2 249.4 57 8/12600 40.3 636.7 21.0 498.2 11.7 371.1 5.8 276.3 4.5 281.5 3.2 252.2400 27.5 652.8 14.4 510.7 8.0 377.8 3.9 280.1 3.0 285.9 2.2 255.6100 7.3 688.2 3.8 535.7 2.1 393.6 1.0 290.1 0.8 295.4 0.6 264.050 3.7 702.6 1.9 544.1 1.1 398.9 0.5 293.0 0.4 298.2 0.3 266.010 0.8 723.5 0.4 554.5 0.2 406.1 0.1 297.6 0.1 302.6 0.1 269.5
1500 202.4 1279.7 121.6 1153.4 62.2 786.5 28.2 535.3 27.3 691.5 21.0 662.91000 139.2 1319.9 83.2 1184.1 42.8 811.5 19.4 552.4 18.7 708.1 14.3 676.8800 113.0 1339.2 67.7 1204.5 34.7 822.6 15.7 558.2 15.1 716.5 11.5 683.7600 85.9 1358.6 51.7 1224.9 26.4 833.7 11.9 565.7 11.5 725.4 8.8 692.1 87 8/12400 59.4 1408.5 35.6 1265.7 18.0 856.0 8.1 576.2 7.8 736.5 5.9 701.1100 15.8 1497.0 9.5 1347.4 4.7 894.9 2.1 601.2 2.0 765.4 1.5 727.55 0 8.1 1529.2 4.8 1378.0 2.4 914.3 1.1 609.5 1.0 772.6 0.8 734.41 0 1.7 1577.5 1.0 1418.8 0.5 931.0 0.2 619.5 0.2 785.4 0.2 744.9
1500 432.0 2731.6 205.7 1951.2 151.6 1917.0 103.9 1971.4 64.5 1631.1 45.0 1422.71000 300.8 2852.8 142.1 2022.1 104.3 1979.2 71.3 2027.8 44.1 1674.5 30.7 1457.5800 245.5 2910.1 115.6 2055.3 84.9 2012.5 57.9 2058.2 35.8 1696.2 24.9 1473.4600 188.6 2980.8 88.6 2100.2 64.8 2048.6 44.1 2092.9 27.2 1720.8 18.9 1493.6400 129.5 3071.7 60.6 2155.1 44.2 2096.4 30.0 2133.4 18.5 1752.6 12.8 1518.2 255 8/12100 34.9 3305.8 16.1 2292.6 11.7 2216.5 7.9 2241.9 4.8 1829.2 3.3 1579.05 0 17.8 3383.3 8.2 2338.8 5.9 2257.0 4.0 2276.6 2.4 1853.8 1.7 1597.81 0 3.6 3379.9 1.7 2403.9 1.2 2310.5 0.8 2322.9 0.5 1888.5 0.3 1622.5
RATIO 1:1 RATIO 1.5:1 RATIO 2:1 RATIO 3:1 RATIO 4:1 RATIO 5:1
BG 42
BG 55
BG 75
NOTE Shaft Rotation: If the bevel gear unit is to rotate in both directions the above ratings must be decreased by 30%
SERIES CONNECTIONSERIES CONNECTIONSERIES CONNECTIONSERIES CONNECTIONSERIES CONNECTIONWhen spiral bevel gearboxes assembly A or AH are mounted in series, the maximum through torque MT MAX (Nm) mentioned below must not be exceeded.For Assembly A and AH see page 8, 9.
SizeSizeSizeSizeSize BG19 ABG19 ABG19 ABG19 ABG19 A BG24 ABG24 ABG24 ABG24 ABG24 A BG32 ABG32 ABG32 ABG32 ABG32 A BG38 ABG38 ABG38 ABG38 ABG38 A BG42 ABG42 ABG42 ABG42 ABG42 A BG55 ABG55 ABG55 ABG55 ABG55 A BG75 ABG75 ABG75 ABG75 ABG75 A
Max. through torque MT Max (Nm)Max. through torque MT Max (Nm)Max. through torque MT Max (Nm)Max. through torque MT Max (Nm)Max. through torque MT Max (Nm) 6 06 06 06 06 0 120120120120120 300300300300300 500500500500500 700700700700700 16001600160016001600 40004000400040004000
IIIIIf working conditions are greater than above, assembly AP gearboxes must be used which have larger shaft diameters.For Assembly AP see page 10.
SizeSizeSizeSizeSize BG19 APBG19 APBG19 APBG19 APBG19 AP BG24 APBG24 APBG24 APBG24 APBG24 AP BG32 APBG32 APBG32 APBG32 APBG32 AP BG38 APBG38 APBG38 APBG38 APBG38 AP BG42 APBG42 APBG42 APBG42 APBG42 AP BG55 APBG55 APBG55 APBG55 APBG55 AP BG75 APBG75 APBG75 APBG75 APBG75 AP
Max. through torque MT Max (Nm)Max. through torque MT Max (Nm)Max. through torque MT Max (Nm)Max. through torque MT Max (Nm)Max. through torque MT Max (Nm) 120120120120120 300300300300300 500500500500500 700700700700700 10001000100010001000 30003000300030003000 65006500650065006500
MT MAXMT MAXMT MAXMT MAXMT MAX
B GSPIRAL BEVEL GEARBOXES
88888
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE aaaaa bbbbb b1b1b1b1b1 ccccc eeeee sssss s1s1s1s1s1 fffff hhhhh iiiii i 1i 1i 1i 1i 1 kkkkk mmmmm qqqqq q1q1q1q1q1 ddddd lllll l 1l 1l 1l 1l 1 ttttt uuuuu zzzzz
BG 12.. 45* 44 - - 54 M6* M6 2 32.5 100 49.5 144 65 74 42 12 26 20 13.5 4 M4BG 19.. 70 60 86 14 72 M6 M6 4 45 140 70 210 90 100 59 19 40 35 21.5 6 M6BG 24.. 88 70 105 18 88 M8 M8 5 55 165 86 260 110 115 73 24 50 40 27.0 8 M8BG 32.. 110 95 135 18 115 M10 M10 5 70 205 100 310 140 145 88 32 60 50 35.0 10 M10BG 38.. 136 120 165 18 145 M12 M12 5 85 240 112 360 170 170 103 38 70 60 41.0 10 M12BG 42.. 155 135 190 18 165 M12 M12 5 100 275 127.5 410 200 195 118 42 80 70 45.0 12 M12BG 55.. 190 170 230 23 205 M14 M14 5 120 355 165 520 240 245 143 55 110 100 59.0 16 M14BG 75.. 248 - 300 30 - M16 - - 165 500 251 750 330 350 195 75 150 140 79.5 22 M16
See Page 5 for assembly options
MOUNTING DIMENSIONSMOUNTING DIMENSIONSMOUNTING DIMENSIONSMOUNTING DIMENSIONSMOUNTING DIMENSIONS GENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS
* On BG12 the holes 'S' at centres 'a' are only available on the sides
Unit SizeUnit SizeUnit SizeUnit SizeUnit Size hhhhh i 2i 2i 2i 2i 2 kkkkk qqqqq q1q1q1q1q1 d1d1d1d1d1 l 2l 2l 2l 2l 2 l 3l 3l 3l 3l 3 t1t1t1t1t1 u1u1u1u1u1 z1z1z1z1z1 ddddd lllll l 1l 1l 1l 1l 1 ttttt uuuuu zzzzz
BG 12.. - - - - - - - - - - - - - - - - -BG 19.. 45 130 210 100 59 14 30 25 16.0 5 M5 19 40 35 21.5 6 M6BG 24.. 55 155 260 115 73 19 40 35 21.5 6 M6 24 50 40 27.0 8 M8BG 32.. 70 195 310 145 88 24 50 40 27.0 8 M8 32 60 50 35.0 10 M10BG 38.. 85 230 360 170 103 28 60 50 31.0 8 M10 38 70 60 41.0 10 M12BG 42.. 100 255 410 195 118 32 60 50 35.0 10 M10 42 80 70 45.0 12 M12BG 55.. 120 325 520 245 143 42 80 70 45.0 12 M12 55 110 100 59.0 16 M14BG 75.. 165 460 750 350 195 55 110 100 59.0 16 M14 75 150 140 79.5 22 M16
GENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS INPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONS OUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AY AY AY AY A, AS & AD, AS & AD, AS & AD, AS & AD, AS & ADRRRRRAAAAATIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1See Page 5 for assembly options
SHAFT DIMENSIONSSHAFT DIMENSIONSSHAFT DIMENSIONSSHAFT DIMENSIONSSHAFT DIMENSIONS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AY AY AY AY A, AS & AD, AS & AD, AS & AD, AS & AD, AS & ADRRRRRAAAAATIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1
Other dimensions as above
DIMENSIONS SOLID INPUT AND OUTPUT SHAFT
B GSPIRAL BEVEL GEARBOXES
99999
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AHY AHY AHY AHY AHRRRRRAAAAATIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1
HOLLOW SHAFTHOLLOW SHAFTHOLLOW SHAFTHOLLOW SHAFTHOLLOW SHAFTDIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONSDIMENSIONS
Other dimensions as aboveOther dimensions as aboveOther dimensions as aboveOther dimensions as aboveOther dimensions as above
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE aaaaa bbbbb b1b1b1b1b1 ccccc eeeee sssss s1s1s1s1s1 fffff hhhhh iiiii i 5i 5i 5i 5i 5 k3k3k3k3k3 qqqqq ddddd lllll l 1l 1l 1l 1l 1 ttttt uuuuu zzzzz DDDDD dHdHdHdHdH tHtHtHtHtH uHuHuHuHuH
BG 12..AH - - - - - - - - - - - - - - - - - - - - - - -BG 19..AH 70 60 86 14 72 M6 M6 4 45 140 30 130 100 19 40 35 21.5 6 M6 30 19 21.8 6BG 24..AH 88 70 105 18 88 M8 M8 5 55 165 36 160 115 24 50 40 27.0 8 M8 35 24 27.3 8BG 32..AH 110 95 135 18 115 M10 M10 5 70 205 40 190 145 32 60 50 35.0 10 M10 50 32 35.3 10BG 38..AH 136 120 165 18 145 M12 M12 5 85 240 42 220 170 38 70 60 41.0 10 M12 60 38 41.3 10BG 42..AH 155 135 190 18 165 M12 M12 5 100 275 47.5 250 195 42 80 70 45.0 12 M12 60 42 45.3 12BG 55..AH 190 170 230 23 205 M14 M14 5 120 355 55 300 245 55 110 100 59.0 16 M14 75 55 59.3 16BG 75..AH 248 - 300 30 - M16 - - 165 500 101 450 350 75 150 140 79.5 22 M16 120 75 79.9 22
MOUNTING DIMENSIONSMOUNTING DIMENSIONSMOUNTING DIMENSIONSMOUNTING DIMENSIONSMOUNTING DIMENSIONS INPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE i 2i 2i 2i 2i 2 qqqqq d1d1d1d1d1 l 2l 2l 2l 2l 2 l 3l 3l 3l 3l 3 t1t1t1t1t1 u1u1u1u1u1 z1z1z1z1z1 DDDDD dHdHdHdHdH tHtHtHtHtH uHuHuHuHuH
BG 12..AH - - - - - - - - - - - -BH 19..AH 130 100 14 30 25 16.0 5 M5 30 19 21.8 6BG 24..AH 155 115 19 40 35 21.5 6 M6 35 24 27.3 8BG 32..AH 195 145 24 50 40 27.0 8 M8 50 32 35.3 10BG 38..AH 230 170 28 60 50 31.0 8 M10 60 38 41.3 10BG 42..AH 255 195 32 60 50 35.0 10 M10 60 42 45.3 12BG 55..AH 325 245 42 80 70 45.0 12 M12 75 55 59.3 16BG 75..AH 460 350 55 110 100 59.0 16 M14 120 75 79.9 22
INPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONS HOLLOW SHAFT DIMENSIONSHOLLOW SHAFT DIMENSIONSHOLLOW SHAFT DIMENSIONSHOLLOW SHAFT DIMENSIONSHOLLOW SHAFT DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AHY AHY AHY AHY AHRRRRRAAAAATIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1
DIMENSIONS HOLLOW OUTPUT SHAFT
B GSPIRAL BEVEL GEARBOXES
1010101010
DIMENSIONS - REINFORCED THROUGH SHAFT
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY APY APY APY APY APRRRRRAAAAATIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1TIO 1:1, 2:1 & 3:1
Unit SizeUnit SizeUnit SizeUnit SizeUnit Size aaaaa iiiii i 3i 3i 3i 3i 3 k 1k 1k 1k 1k 1 qqqqq ddddd lllll l 1l 1l 1l 1l 1 ttttt uuuuu zzzzz d 2d 2d 2d 2d 2 l 4l 4l 4l 4l 4 l 5l 5l 5l 5l 5 t 2t 2t 2t 2t 2 u 2u 2u 2u 2u 2 Z 2Z 2Z 2Z 2Z 2
BG 12..AP - - - - - - - - - - - - - - - - -BG 19..AP 70 140 80 230 100 19 40 35 21.5 6 M6 24 50 40 27.0 8 M8BG 24..AP 88 165 96 280 115 24 50 40 27.0 8 M8 32 60 50 35.0 10 M10BG 32..AP 110 205 110 330 145 32 60 50 35.0 10 M10 38 70 60 41.0 10 M12BG 38..AP 136 240 122 380 170 38 70 60 41.0 10 M12 42 80 70 45.0 12 M12BG 42..AP 155 275 137.5 430 195 42 80 70 45.0 12 M12 48 90 80 51.5 14 M14BG 55..AP 190 355 165 520 245 55 110 100 59.0 16 M14 70 110 100 74.5 20 M14BG 75..AP 248 500 251 750 350 75 150 140 79.5 22 M16 90 150 140 95.0 25 M16
GENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS
INPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONS
OUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONS
Unit SizeUnit SizeUnit SizeUnit SizeUnit Size i 2i 2i 2i 2i 2 k 1k 1k 1k 1k 1 qqqqq d 1d 1d 1d 1d 1 l 2l 2l 2l 2l 2 l 3l 3l 3l 3l 3 t 1t 1t 1t 1t 1 u 1u 1u 1u 1u 1 z 1z 1z 1z 1z 1 d 2d 2d 2d 2d 2 l 4l 4l 4l 4l 4 l 5l 5l 5l 5l 5 t 2t 2t 2t 2t 2 u 2u 2u 2u 2u 2 Z 2Z 2Z 2Z 2Z 2
BBBBBG 12..AP - - - - - - - - - - - - - - -BG 19..AP 130 230 100 14 30 25 16.0 5 M5 24 50 40 27.0 8 M8BG 24..AP 155 280 115 19 40 35 21.5 6 M6 32 60 50 35.0 10 M10BG 32..AP 195 330 145 24 50 40 27.0 8 M8 38 70 60 41.0 10 M12BG 38..AP 230 380 170 28 60 50 31.0 8 M10 42 80 70 45.0 12 M12BG 42..AP 255 430 195 32 60 50 35.0 10 M10 48 90 80 51.5 14 M14BG 55..AP 325 520 245 42 80 70 45.0 12 M12 70 110 100 74.5 20 M14BG 75..AP 460 750 350 55 110 100 59.0 16 M14 90 150 140 95.0 25 M16
GENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS OUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY APY APY APY APY APRRRRRAAAAATIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1TIO 4:1 & 5:1
Other dimensions as Type A page 8
Other dimensions as above
Use Assembly 'AP' to transmit a greater through torque than Assembly 'A' see page 7
INPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONS
B GSPIRAL BEVEL GEARBOXES
1111111111
DIMENSIONS
INPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONSINPUT SHAFT DIMENSIONS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AX - SPEED INCREASINGY AX - SPEED INCREASINGY AX - SPEED INCREASINGY AX - SPEED INCREASINGY AX - SPEED INCREASING
MOUNTING BASE - FC (MALE SPIGOT)MOUNTING BASE - FC (MALE SPIGOT)MOUNTING BASE - FC (MALE SPIGOT)MOUNTING BASE - FC (MALE SPIGOT)MOUNTING BASE - FC (MALE SPIGOT) FP (FEMALE SPIGOT) FP (FEMALE SPIGOT) FP (FEMALE SPIGOT) FP (FEMALE SPIGOT) FP (FEMALE SPIGOT)
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE RRRRRAAAAATIOTIOTIOTIOTIO aaaaa iiiii i 4i 4i 4i 4i 4 k 2k 2k 2k 2k 2 qqqqq ddddd lllll l 1l 1l 1l 1l 1 ttttt uuuuu zzzzz d 3d 3d 3d 3d 3 l 6l 6l 6l 6l 6 l 7l 7l 7l 7l 7 t 3t 3t 3t 3t 3 u 3u 3u 3u 3u 3 Z 3Z 3Z 3Z 3Z 3
BG 12..AX - - - - - - - - - - - - - - - - - -BG 19..AX 1:1.5 1:2 70 140 60 190 100 19 40 35 21.5 6 M6 14 30 25 16.0 5 M5BG 24..AX 1:1.5 1:2 88 165 76 240 115 24 50 40 27.0 8 M8 19 40 35 21.5 6 M6BG 32..AX 1:1.5 110 205 90 290 145 32 60 50 35.0 10 M10 24 50 40 27.0 8 M8BG 32..AX 1:2 110 205 80 270 145 32 60 50 35.0 10 M10 19 40 35 21.5 6 M6BG 38..AX 1:1.5 1:2 136 240 102 340 170 38 70 60 41.0 10 M12 28 60 50 31.0 8 M10BG 42..AX 1:1.5 155 275 117.5 390 195 42 80 70 45.0 12 M12 38 70 60 41.0 10 M12BG 42..AX 1:2 155 275 107.5 370 195 42 80 70 45.0 12 M12 32 60 50 35.0 10 M10BG 55..AX 1:1.5 190 355 135 460 245 55 110 100 59.0 16 M14 42 80 70 45.0 12 M12BG 55..AX 1:2 190 355 125 440 245 55 110 100 59.0 16 m14 38 70 60 41.0 10 M12BG 75..AX 1:1.5 1:2 248 500 211 670 350 75 150 140 79.5 22 M16 55 110 100 59.0 16 M14
GENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS OUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONSOUTPUT SHAFT DIMENSIONS
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE a 9a 9a 9a 9a 9 b4H7b4H7b4H7b4H7b4H7 b7g6b7g6b7g6b7g6b7g6 c 9c 9c 9c 9c 9 e 8e 8e 8e 8e 8 f 7f 7f 7f 7f 7 s 3s 3s 3s 3s 3 mmmmm
BG 12.. - - - - - - - -BG 19.. 160 86 110 12 130 3.5 9 70BG 24.. 200 105 130 13 165 3.5 11 85BG 32.. 250 135 180 15 215 4 14 105BG 38.. 300 165 230 15 265 4 14 125BG 42.. 300 190 230 15 265 4 14 145BG 55.. 350 230 250 18 300 5 18 175BG 75.. 450 300 350 25 400 5 18 230
GENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONSGENERAL DIMENSIONS
Note: Mounting Base FP maybe supplied with female spigot 'b4' leaving dimension 'm' unchangedNote: Mounting Base FP maybe supplied with female spigot 'b4' leaving dimension 'm' unchangedNote: Mounting Base FP maybe supplied with female spigot 'b4' leaving dimension 'm' unchangedNote: Mounting Base FP maybe supplied with female spigot 'b4' leaving dimension 'm' unchangedNote: Mounting Base FP maybe supplied with female spigot 'b4' leaving dimension 'm' unchanged
B GSPIRAL BEVEL GEARBOXES
1212121212
MOTOR INPUT HOUSINGS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MAY MAY MAY MAY MA
UNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZEUNIT SIZE RRRRRAAAAATIOTIOTIOTIOTIO o1o1o1o1o1 IECIECIECIECIEC a2a2a2a2a2 b2b2b2b2b2 dH1dH1dH1dH1dH1 e2e2e2e2e2 s2s2s2s2s2 IECIECIECIECIEC a2a2a2a2a2 b2b2b2b2b2 dH1dH1dH1dH1dH1 e2e2e2e2e2 s2s2s2s2s2 IECIECIECIECIEC a2a2a2a2a2 b2b2b2b2b2 dH1dH1dH1dH1dH1 e2e2e2e2e2 s2s2s2s2s2
BG 12..MA 1:1 2:1 3:1 90 63 140 95 11 115 9 105 70 14 85 9
BG 19..MA 1:1 2:1 3:1 90 63 140 95 11 115 9BG 19..MA 4:1 5:1 90 71 160 110 14 130 M8
BG 24..MA 1:1 2:1 3:1 120 71 160 110 14 130 M8 80 200 130 19 165 M10 90 200 130 24 165 M10BG 24..MA 4:1 5:1 120 71 160 110 14 130 M8 80 200 130 19 165 M10
BG 32..MA 1:1 2:1 3:1 140 80 200 130 19 165 M10 90 200 130 24 165 M10 250 180 28 215 M12BG 32..MA 4:1 5:1 140 80 200 130 19 165 M10 90 200 130 24 165 M10
BG 38..MA 1:1 2:1 3:1 155 90 200 130 24 165 M10 250 180 28 215 M12 132 300 230 38 265 M12BG 38..MA 4:1 5:1 155 90 200 130 24 165 M10 250 180 28 215 M12
BG 42..MA 1:1 2:1 200 250 180 28 215 M12 132 300 230 38 265 M12 160 350 250 42 300 M16BG 42..MA 3:1 200 250 180 28 215 M12 132 300 230 38 265 M12BG 42..MA 4:1 5:1 200 250 180 28 215 M12
BG 55..MA 1:1 2:1 3:1 220 250 180 28 215 M12 132 300 230 38 265 M12 160 350 250 42 300 M16BG 55..MA 4:1 5:1 220 250 180 28 215 M12 132 300 230 38 265 M12
MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5 MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5 MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5MOTOR INPUT B5
For hollow and other shaft configurations refer to standard drawingsFor hollow and other shaft configurations refer to standard drawingsFor hollow and other shaft configurations refer to standard drawingsFor hollow and other shaft configurations refer to standard drawingsFor hollow and other shaft configurations refer to standard drawings
71/B14
100/112
100/112
100/112
100/112
100/112100/112
100/112
B GSPIRAL BEVEL GEARBOXES
1313131313
MOTORISED ASSEMBLY OPTIONS
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MASY MASY MASY MASY MAS ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MADY MADY MADY MADY MAD ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MACY MACY MACY MACY MAC
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MBY MBY MBY MBY MB ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MBSY MBSY MBSY MBSY MBS ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MBDY MBDY MBDY MBDY MBD
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MDRY MDRY MDRY MDRY MDR
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MBHY MBHY MBHY MBHY MBH
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY MAHY MAHY MAHY MAHY MAH
B GSPIRAL BEVEL GEARBOXES
1414141414
REVERSING SPIRAL BEVEL GEARBOXES
90 DEG REVERSING SPIRAL BEVEL GEARBOXES - DESIGN IO90 DEG REVERSING SPIRAL BEVEL GEARBOXES - DESIGN IO90 DEG REVERSING SPIRAL BEVEL GEARBOXES - DESIGN IO90 DEG REVERSING SPIRAL BEVEL GEARBOXES - DESIGN IO90 DEG REVERSING SPIRAL BEVEL GEARBOXES - DESIGN IO
90 deg. reversing spiral bevel gearboxes are available with ratio 1:1 and 2:1 only90 deg. reversing spiral bevel gearboxes are available with ratio 1:1 and 2:1 only90 deg. reversing spiral bevel gearboxes are available with ratio 1:1 and 2:1 only90 deg. reversing spiral bevel gearboxes are available with ratio 1:1 and 2:1 only90 deg. reversing spiral bevel gearboxes are available with ratio 1:1 and 2:1 only. by moving the control lever from fully engaged through neutral to fully. by moving the control lever from fully engaged through neutral to fully. by moving the control lever from fully engaged through neutral to fully. by moving the control lever from fully engaged through neutral to fully. by moving the control lever from fully engaged through neutral to fullyengaged in the opposite direction, the 90 deg. shaft will change rotation.engaged in the opposite direction, the 90 deg. shaft will change rotation.engaged in the opposite direction, the 90 deg. shaft will change rotation.engaged in the opposite direction, the 90 deg. shaft will change rotation.engaged in the opposite direction, the 90 deg. shaft will change rotation.
Operation of the leverOperation of the leverOperation of the leverOperation of the leverOperation of the lever, which is nor, which is nor, which is nor, which is nor, which is normally carmally carmally carmally carmally carried out by hand may only be done when the unit is stationarried out by hand may only be done when the unit is stationarried out by hand may only be done when the unit is stationarried out by hand may only be done when the unit is stationarried out by hand may only be done when the unit is stationaryyyyy.....
Engaging position is usually indifferent, and reversing spiral bevel gearbox is called FP (full position).Engaging position is usually indifferent, and reversing spiral bevel gearbox is called FP (full position).Engaging position is usually indifferent, and reversing spiral bevel gearbox is called FP (full position).Engaging position is usually indifferent, and reversing spiral bevel gearbox is called FP (full position).Engaging position is usually indifferent, and reversing spiral bevel gearbox is called FP (full position).
On request may be supplied with option SP (single Position) and is possibly only one engaging position on 360 deg.On request may be supplied with option SP (single Position) and is possibly only one engaging position on 360 deg.On request may be supplied with option SP (single Position) and is possibly only one engaging position on 360 deg.On request may be supplied with option SP (single Position) and is possibly only one engaging position on 360 deg.On request may be supplied with option SP (single Position) and is possibly only one engaging position on 360 deg.
RRRRReversing bevel gearboxes are produced insizes BG32, BG42, BG55 onlyeversing bevel gearboxes are produced insizes BG32, BG42, BG55 onlyeversing bevel gearboxes are produced insizes BG32, BG42, BG55 onlyeversing bevel gearboxes are produced insizes BG32, BG42, BG55 onlyeversing bevel gearboxes are produced insizes BG32, BG42, BG55 only.....
Selection corresponds to inputkW and output torque as pages 6/7 reduced by 30%.Selection corresponds to inputkW and output torque as pages 6/7 reduced by 30%.Selection corresponds to inputkW and output torque as pages 6/7 reduced by 30%.Selection corresponds to inputkW and output torque as pages 6/7 reduced by 30%.Selection corresponds to inputkW and output torque as pages 6/7 reduced by 30%.
Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AY AY AY AY A ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY DY DY DY DY D
CO-AXIAL REVERSING SPIRAL BEVEL GEARBOXES - DESIGN ICCO-AXIAL REVERSING SPIRAL BEVEL GEARBOXES - DESIGN ICCO-AXIAL REVERSING SPIRAL BEVEL GEARBOXES - DESIGN ICCO-AXIAL REVERSING SPIRAL BEVEL GEARBOXES - DESIGN ICCO-AXIAL REVERSING SPIRAL BEVEL GEARBOXES - DESIGN IC
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY DY DY DY DY D
Co-axial spiral bevel gearboxes are available in ratio 1:1 onlyCo-axial spiral bevel gearboxes are available in ratio 1:1 onlyCo-axial spiral bevel gearboxes are available in ratio 1:1 onlyCo-axial spiral bevel gearboxes are available in ratio 1:1 onlyCo-axial spiral bevel gearboxes are available in ratio 1:1 only.....
By moving the control lever from fully engaged through neutral to fully engaged in the opposite direciton the co-axial shaft will change rotation.By moving the control lever from fully engaged through neutral to fully engaged in the opposite direciton the co-axial shaft will change rotation.By moving the control lever from fully engaged through neutral to fully engaged in the opposite direciton the co-axial shaft will change rotation.By moving the control lever from fully engaged through neutral to fully engaged in the opposite direciton the co-axial shaft will change rotation.By moving the control lever from fully engaged through neutral to fully engaged in the opposite direciton the co-axial shaft will change rotation.
On request co-axial reversing spiral bevel gearboxes may be supplied with a third projection shaft at 90 deg.On request co-axial reversing spiral bevel gearboxes may be supplied with a third projection shaft at 90 deg.On request co-axial reversing spiral bevel gearboxes may be supplied with a third projection shaft at 90 deg.On request co-axial reversing spiral bevel gearboxes may be supplied with a third projection shaft at 90 deg.On request co-axial reversing spiral bevel gearboxes may be supplied with a third projection shaft at 90 deg.
Operation of the leverOperation of the leverOperation of the leverOperation of the leverOperation of the lever, which is nor, which is nor, which is nor, which is nor, which is normally carmally carmally carmally carmally carried out by hand, may only be done when the unit is stationarried out by hand, may only be done when the unit is stationarried out by hand, may only be done when the unit is stationarried out by hand, may only be done when the unit is stationarried out by hand, may only be done when the unit is stationaryyyyy.....
Co-axial reversing bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyCo-axial reversing bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyCo-axial reversing bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyCo-axial reversing bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyCo-axial reversing bevel gearboxes are produced in sizes BG32, BG42, BG55 only.....
Selection corresponds to input kW and output torque as pages 6/7 reduced by 30%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 30%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 30%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 30%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 30%.
Dimensions and mounting positions are the same as Assembly DR.Dimensions and mounting positions are the same as Assembly DR.Dimensions and mounting positions are the same as Assembly DR.Dimensions and mounting positions are the same as Assembly DR.Dimensions and mounting positions are the same as Assembly DR.
B GSPIRAL BEVEL GEARBOXES
1515151515
DIS-ENGAGING SPIRAL BEVEL GEARBOXES
ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY AY AY AY AY A ASASASASASSEMBLSEMBLSEMBLSEMBLSEMBLY DY DY DY DY D
DIS-ENGAGING SPIRAL BEVEL GEARBOXES - DESIGN DODIS-ENGAGING SPIRAL BEVEL GEARBOXES - DESIGN DODIS-ENGAGING SPIRAL BEVEL GEARBOXES - DESIGN DODIS-ENGAGING SPIRAL BEVEL GEARBOXES - DESIGN DODIS-ENGAGING SPIRAL BEVEL GEARBOXES - DESIGN DO
Dis-engaging spiral bevel gearboxes are manufactured in ratio 1:1, 2:1, 3:1 onlyDis-engaging spiral bevel gearboxes are manufactured in ratio 1:1, 2:1, 3:1 onlyDis-engaging spiral bevel gearboxes are manufactured in ratio 1:1, 2:1, 3:1 onlyDis-engaging spiral bevel gearboxes are manufactured in ratio 1:1, 2:1, 3:1 onlyDis-engaging spiral bevel gearboxes are manufactured in ratio 1:1, 2:1, 3:1 only.....
Operation of the lever disengages the 90 deg. shaft.Operation of the lever disengages the 90 deg. shaft.Operation of the lever disengages the 90 deg. shaft.Operation of the lever disengages the 90 deg. shaft.Operation of the lever disengages the 90 deg. shaft.
This is norThis is norThis is norThis is norThis is normally carmally carmally carmally carmally car ried out by hand and may only take place when the unit is stationarried out by hand and may only take place when the unit is stationarried out by hand and may only take place when the unit is stationarried out by hand and may only take place when the unit is stationarried out by hand and may only take place when the unit is stationar yyyyy.....
Dis-engaging spiral bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyDis-engaging spiral bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyDis-engaging spiral bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyDis-engaging spiral bevel gearboxes are produced in sizes BG32, BG42, BG55 onlyDis-engaging spiral bevel gearboxes are produced in sizes BG32, BG42, BG55 only.....
Selection corresponds to input kW and output torque as pages 6/7 reduced by 15%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 15%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 15%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 15%.Selection corresponds to input kW and output torque as pages 6/7 reduced by 15%.
Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.Dimensions and mounting positions are the same as Assembly A (page 8) and Assembly DR.
B GSPIRAL BEVEL GEARBOXES
1616161616