axOn’ Flat Cables & asseMblies range · Cable asseMblies Axon’ Interconnectors & Wires PVT LTD...
Transcript of axOn’ Flat Cables & asseMblies range · Cable asseMblies Axon’ Interconnectors & Wires PVT LTD...
FFC Flat Flexible Cables
axOJUMP
Flat Cables with rOUnd Pins
axOstriP
bUlk Flat Flexible Cables
Flexlink®
FdC-Flat disPlay COnneCtiOns
axOlink
FdC FOr high sPeed (lVds) & Ultra high sPeed
(Uhs) transMissiOn
FdC 100®
Range of Round-end Flat Cables (RFC)Can be soldered or inserted to achieve through holes board-to-board interconnectionsAvailable in several pitches including 1.00 mm, 1.25 mm, 1.27mm, 1.905 mm, 2.00 mm, 2.54 mm and 5.08 mm pitchesMade up of tin plated copper insulated with Polyes-ter, Polyimide or Aramid tapes
2 types of ends are possible: - Round conductors on both ends: lower production costs since no connectors are required- Round conductors on one end, flat conductors on the other end: this version which is dismountable is compatible with ZIF connectors
advantages• High resistance to bending and vibration• Easy and fast installation • Power transmission • Ready to use : wire stripping and cutting to length is not required• Low assembly cost: the Round-end Flat Cables are wave-soldered with the other components• Excellent flexibility
Designed for board to display interconnections
Standard Flat Flexible Cables and connectors such as DF-9; DF-19, FI-SE, FI-X at one or both ends
Flat Flexible Cables: 0.5, 1.00 and 1.25 mm pitches
advantages• Space saving: low profile, narrow width design.• Reliable connection• Excellent flex life and flexibility• Ready-to-plug connection• Foldable for easy integration mounting• FFC lengths to requirements but standardized lengths offered for quicker service• Simple locking mechanism (DF-9)• Shielded version for EMI protection
axOn’ interCOnneCtOrs & wires: Made-in-india
Cable asseMblies
Axon’ Interconnectors
& Wires PVT LTD
designs and manufactures
state-of-the-art wires
and cable assemblies terminated
with Micro-D connectors,
as well as RF & microwave
cable assemblies for defence
and aerospace applications.
The factory is equipped with
an ISO 8 clean room dedicated
to space applications.
The company has been located
in Bangalore since 2010
and has its own design department. Our
engineers are able to provide customers
with technical support
for any product
manufactured within the Axon’ group.
Add-on flat flexible cables can
be marked, folded or punched
by our local skilled operators.
aPPliCatiOns Automotive •
Consumer electronics •
Defense & aeronautics electronics •
Medical •
Others •
Increased flexibility: can retain the cables and the shielding without damage due to bending or pulling.
Good shock and vibrations re-sistance: prevents fatigue and damages to internal compo-nents.
Protects from physical, harsh and extreme environments: the PU material has very good abrasion resistance.
Ingress protection: water and dust proof.
Better finishing : smooth shape, with clean edges.
Compact and lightweight
Very good alternative to heat-shrink boots and backshells.
Bare or tin plated copper conductors insulated with Polyester film
For any application where space reduction and flexibility are the most important criteria
Crimped contacts termination
Custom designed solutions with specific conductors and pitches
advantages• Very flexible cables• Space saving cabling• Supplied on the reel: bulk flat flex cables can be cut to length to your needs• Compatible with most of the crimp contacts• Temperature rating: -40°C to 105°C
axOn’ Flat Cables & asseMblies range
Flat Flexible Cables FOr eleCtrOniCs
As part of the Axon’ group, specialist in
interconnect solutions, Axon’ Inter-
connectors and Wires PVT is then able
to offer a complete range of flat flexible
cables and assemblies for very deman-
ding applications. Flat Flexible Cables
(FFC), Flat Cables with round pins for
board-to-board interconnection, bulk
Flat Flexible Cables for automotive,
these are just a few examples of the so-
lutions we are able to provide you.
All the Axon’ flat cables and assemblies
range are produced in Asia (China) and
Europe (Hungary). The headquarters of
the group is located in France.
axOn’ grOUP QUality assUranCe
CUrrent ratings Per COndUCtOrsFFC FLAT FLexIBLe CABLeS AxOJUMP
0.30 mm PITCH: 0.30A
0.50 mm PITCH: 0.35A to 0.55A
1.00 mm PITCH: 0.80A to 1.25A
1.25 mm PITCH: 0.80A to 1.40A
1A to 3A 0.9A to 3A
For further details, please refer to the following technical brochure:http://www.axon-cable.com/publications/Flat-Flexible-Cables-and-Assemblies.pdf
FLAT CABLeS WITH ROUnD PInS AxOSTRIP BULk FLAT FLexIBLe CABLeS FLexLInk ®
Designed for board-to-board interconnections and made up of flat conductors insulated with Polyester or Polyimide tapes (from 0.3mm to 1.25mm pitch)
Custom designed Flat Flexible Cables incorporating folds, shields, notches, punching, slitting and marking
Flat Flexible Cable termination is compatible with ZIF (Zero Insertion Force) / LIF (Low In-sertion Force) connectors: the cables are equipped with rein-forcement tape to strengthen the ends, or by soldering
advantages• Extremely small dimensions• Easy and fast installation• Excellent flexibility & flexlife• Flat cables with gold plating on the stripped end can be offered to guarantee the absence of tin whiskers• EMI shielding with aluminium tape
• ISO 9001
• ISO 14001• ISO 45001
• ISO TS 16949
• EN 9100
• ISO 13485
©20
18,
AxOn
’ CAB
Le -
ALL
RIG
HTS
ReSe
RVeD
- R
eLeA
SeD
MAY
201
8/A
- A
LL In
FORM
ATIO
n CO
nTAI
neD
In T
HIS
BROC
HURe
IS S
UBJe
CT T
O CH
AnGe
WIT
HOUT
PRI
OR n
OTIC
e -
PHOT
OS n
ICke
LkRO
Me
FLex
LInk
® /
FDC
100®
ARe
ReG
ISTe
ReD
TRAD
eMAR
k OF
AxO
n’ C
ABLe
AXON’ INTERCONNECTORS AND WIRES PVT LTDNo-117, Neil Rao Towers, Suite No : 1W,Road-3, EPIP,Whitefield,Bangalore – 560066Tel : 91 80 40918186 Fax : 91 80 40918185e-mail : [email protected]
HEADQUARTERSAXON’ CABLE SAS2 RTE DE CHALONS EN CHAMPAGNE51210 MONTMIRAILFRANCETEL +33 3 26 81 70 00FAX +33 3 26 81 28 83e-mail : [email protected]
Flat Flexible Cables & cable assemblies
exPertise
yOUr lOCal PrOVider in india
www.axon-cable.com www.axon-cable.com