Averaging RSSI
1
For averaging RSSI and carrier power, these values must be checked close to the maximum allowed values. If the average values are close to these thresholds, it implies the chance of having congestion/admission block is high. In fact, it will be more interesting to look at max RSSI and carrier power sampled values. Still as RL setup is taking very short time to establish, it will be very hard to say how those max values are related to RL failures. In TEMS Investigation, this can be found by verifying that the UE send RRC Connection Request, UTRAN send RRC Connection Reject with cause = congestion.
-
Upload
thildathilda -
Category
Documents
-
view
215 -
download
2
description
Averaging RSSI
Transcript of Averaging RSSI
For averaging RSSI and carrier power, these values must bechecked close to the maximum allowed values. If the averagevalues are close to these thresholds, it implies the chance of havingcongestion/admission block is high. In fact, it will be moreinteresting to look at max RSSI and carrier power sampled values.Still as RL setup is taking very short time to establish, it will bevery hard to say how those max values are related to RL failures.In TEMS Investigation, this can be found by verifying that the UEsend RRC Connection Request, UTRAN send RRC ConnectionReject with cause = congestion.
