availon_flyer_carbon-brush_holders_en-eu

3
Availon carbon-brush holders for Vestas® V80 / V90. WE LISTEN. Impd mrt, redu d mn nan.

description

http://www.availon.eu/fileadmin/downloads/broschueren/availon_flyer_carbon-brush_holders_en-eu.pdf

Transcript of availon_flyer_carbon-brush_holders_en-eu

Page 1: availon_flyer_carbon-brush_holders_en-eu

Availon carbon-brush holders for Vestas® V80 / V90.

• Availon air-conditioning system. Off ering an improved ventilation management for

2 MW WTGs transformers

• Availon control box. A portable control unit that allows to control the

WTG directly from the nacelle during maintenance

• Availon carbon-brush holders. Redused maintenance and extended service life of

carbon brushes in the generator

Overview of our V� � s® upgra� s.

W E L I S T E N .

Imp� � d � m� rt, redu d m n� nan .

“Vestas” is a registered trademark of Vestas Wind Systems A/S, DK.

24/ 7 � r .

Availon GmbHJacksonring 2 | 48429 Rheine | Germanywww.availon.eu

Further information about our range of services can be found at www.availon.eu. Alternatively, contact us by e-mail at [email protected] or call us directly at: +49 5971 8025-0.

Page 2: availon_flyer_carbon-brush_holders_en-eu

Sometimes the small seemingly inconsequencial things produce a big eff ect in the maintenance of WTGs. In this case, the small things are expensive. In the 2 MW Vestas® V80 and V90 WTGs, the bracket used for the carbon brushes on the generator can cause problems when changing the sliding contacts.

During dismantling of the brushes, parts of the housing can fall into the slip-ring box. Because of the compact area, removal takes time and is expensive. Existing brackets also reduce the service life of the carbon brushes and produce uneven wear. Enough reasons for our engineers to develop an upgrade, off ering an effi cient solution.

A key aspect of our new bracket is its compact size. It is designed in such a way that the housing components do not have to be fully removed from the unit during assembly. Service engineers can therefore rely on a reliable and quick operation despite the restricted space.

In order to reduce the wear of the carbon brushes, we have devel-oped the geometry of the bracket and the confi guration of the sliding contacts in such a way that equalizes the wear on the leading and trailing sides. The benefi t: the service life of the carbon brushes increases by 50 %, and they only have to be replaced every 18 months instead of every year.

Wה n rep� � ng � rb� brusה s becom� � o expen� � .

Overview of benefi ts.

• Time-saving as carbon brushes can be

replaced much more quickly

• Equal wear on leading and trailing side

• Preservation of slip-rings

• Normal service life is extended by 50 %

• Replacement intervals are extended from

one year to 18 months

Ex ll ent � nd� ng � d a perfect � @ re� w� r.

Page 3: availon_flyer_carbon-brush_holders_en-eu

Availon carbon-brush holders for Vestas® V80 / V90.

• Availon air-conditioning system. Off ering an improved ventilation management for

2 MW WTGs transformers

• Availon control box. A portable control unit that allows to control the

WTG directly from the nacelle during maintenance

• Availon carbon-brush holders. Redused maintenance and extended service life of

carbon brushes in the generator

Overview of our V� � s® upgra� s.

W E L I S T E N .

Imp� � d � m� rt, redu d m n� nan .

“Vestas” is a registered trademark of Vestas Wind Systems A/S, DK.

24/ 7 � r .

Availon GmbHJacksonring 2 | 48429 Rheine | Germanywww.availon.eu

Further information about our range of services can be found at www.availon.eu. Alternatively, contact us by e-mail at [email protected] or call us directly at: +49 5971 8025-0.