Av Catalogo Completo 2005
-
Upload
marin-laurentiu -
Category
Documents
-
view
115 -
download
14
description
Transcript of Av Catalogo Completo 2005
General catalogue
p1_20ing 1 06 2006 7:43 Pagina 3
p2_3ing 1 06 2006 7:48 Pagina 2
It has been 25 years since
the first cell of A.V.Saldature was born
in a little basement.
25 years of growth and development
with our gaze directs on the future,
trough the adversity, with the intention
of never stop or to have a rest.
Challenger after challenger to be among
the best on Italian stage first,
and on international stage today.
We were born little but always with great
ambitions and clear ideas.
One above all: put the customer
before everything.
Today after many years and many
relocations, we go on following these few but
basic principals.
p2_3ing 1 06 2006 7:49 Pagina 3
SILVER
Cheap alloys with low silver content andsufficient capillarity and fluidity. Suitable foriron-iron and iron-copper joints.
Alloys with medium-low silver content, goodcapillarity and fluidity. Suitable for brasscasting, lamp fixture, etc.
Alloys with medium silver content, lowmelting point, excellent capillarity andfluidity. For universal use.
Alloys high silver content, small meltingrange, excellent capillarity and fluidity. Usedfor brazing thin joints such as diaphragms,thermostat or pipes in brass such as brassbedsteads, trolleys ,etc.
D 31D 60
D 26D 31D 60D 4
D 39D 60D 4
D 4D 26D 39D 60
T25 9 52 33 6 625-830T38 13 44 33 10 605-795T40 17 41 26 16 590-760T45 19 39 28 14 630-730T50 20 40 25 15 605-765 AG 309T70 21 35 27 17 620-730 AG 308
T75 25 33 25 17 605-720T78 30 27 21 22 610-700 AG 306
T80 34 25 22 19 610-670 AG 305T88 38 20 22 20 610-665T90 40 19 21 20 595-630 AG304T96 45 15 16 24 605-620 AG 302T98 42 17 16 25 605-620 AG 303T510 50 15 17 18 620-640 AG 301T520 50 15,5 15,5 3Ni-18CD 645-690 AG 351
Ag Cu Zn Cd
LOW TEMPERATURE BRAZING
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE
EN 1044 RECOMMENDEDDEOXIDANTS
APPLICATIONS
Alloys for double welding, very toughand resistant, excellent for brass strips.
Alloys cadmium free with medium/highsilver content, small melting range,excellent capillarity and fluidity.Used for brazing thin joints such asdiaphragms, thermostat, etc.Indicated for food contiguous point.
D 31D 60
D 4D 26D 39D 60D 31
T28 5 55 40 830-870 AG 208T68 20 45 35 690-795 AG 206T79 30 38 32 680-765 AG 204T96 44 30 26 680-740 AG 203T77S 25 40 33 Sn2 680-760 AG 108T79S 30 36 32 Sn2 650-750 AG 107T80S 34 36 27 Sn3 630-730 AG 106T90S 40 30 28 Sn2 640-700 AG 105T96S 45 27 25 Sn3 640-680 AG 104T99S 55 21 22 Sn2 630-660 AG 103T99 56 22 17 Sn5 620-650 AG 102T500 49 16 23 7,5Mn-4,5Ni 625-705 AG 502T530 49 27 21 2,5Mn-0,5NiTrimetallico Z 49 27 21 2,5Mn-0,5Ni 670-690T600 60 26 14 695-730 AG 202T700 67 22 11 700-730T720 72 28 780 AG 401T750 74 18 8 740-780
Ag Cu Zn Altri
BRAZING FOR SPECIAL APPLICATIONS - CADMIUM FREEBRAZING
ALLOYCOMPOSITION
%MELTINGRANGE
EN 1044RECOMMENDED
DEOXIDANTSAPPLICATIONS
D 26 Powder FH 12 550 - 850
D 60 Paste FH 12 550 - 850
D 31 Powder FH 10 650 - 870
D 39 Paste - Powder FH 12 500 - 780
D 4 Paste - Powder FH 12 550 -850
D 36 Paste - Powder FH 12 500 - 750
D 31 F Powder FH 10 650 - 850
D E Powder FH 10 550 - 800
D 32 Dosable paste FH 12 550 - 800
DEOXIDANTS FOR LOW TEMPERATURE BRAZING
NAME SUPPLYFORM
EN 1044 TEMPERATURERANGE
Alloys for iron tubes, brazing metalfurnishings, bicycleframes, excellent for steel and castiron brazing.The choice dependsfrom the requiredtoughness andfluidity.
D50D51D53D54
DL87NDL87 Special
DL88NDL90NDL89N
DL89ECODL88ECODL87ECOECOFLUX
ECOFLUXMEDIUM
RAME 100 Rest 1083
S21 59,5 Rest 0,25 860-900 CU 301
SM23 59 Rest 0,15 Mn 0,8-Sn 1 880-900 CU 306
ST22 59 Rest 0,25 Sn1 800-840
SN32 57 Rest 5 0,15 860-910
SN34 51 Rest 10 0,2 900-930
SN36 49,9 Rest 9 0,15 890-920 CU 305
SN37A 49 Res 9 0,2 Ag1 Mn 0,15 870-900
Cu Zn Ni Si Others
IRON-IRON BRAZING
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE
EN 1044 RECOMMENDEDDEOXIDANTS
APPLICATIONS
BRASS
MR brazing Alloys usedtogether with the fluxdistribuited from thevaporizer systemthrough the flame,acquire more fluidityand penetration in thejoint, leaving slightresidues of flux afterthe brazing.
DL87NDL87 Special
DL88NDL90NDL89N
DL89ECODL88ECODL87ECOECOFLUX
ECOFLUXMEDIUM
SM23 59 Rest - 0,15 Mn 0,8-Sn 0,8 880-900 CU 306
ST22 59 Rest - 0,25 Sn1 800-840 -
T28 MR 55 Rest - 0,2 Ag 5 830-870 AG 208
T68 MR 45 Rest - 0,2 Ag 20 690-795 AG 206
Cu Zn Ni Si Others
MR BRAZING ALLOY
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE EN 1044
RECOMMENDEDFLUXES APPLICATIONS
D 54 Paste FH 20 700-950
D 50 Powder FH 20 700-950
D 51 Powder FH 21 800-1000
D 53 Paste FH 20 780-950
D B Powder FH 20 750-1000
DEOXIDANTS FOR IRON-IRON BRAZING
NAMESUPPLYFORM EN 1045
TEMPERATURERANGE PACKING
POWDER:0,250 - 0,5 - 1 - 5 - 20 Kg
PASTE:1 - 1,5 - 5 - 20 Kg
VAPORIZABLE LIQUID FLUXES
EN 1045
VaporizeRsystem
APPLICATIONS PACKING
LIQUIDs- Homologated plastic
tanks 5 Lt.- Homologated plastic
tanks 10 Lt.- Homologated plastic
tanks 20 Lt.- Homologated steel
tanks 25 Lt.- Homologated
steel drums 190 Lt.
For microflamesGoldsmith industries.
For hydrogen machinesGoldsmith industries.
Metal fumishings -refrigeneration
Air conditioning -Goldsmith industries.
L 80 N Low FH 21
L 80/15 N Low FH 21
L 84 N Low FH 21
L 85 N Low FH 21
L 86 N Medium FH 21
L 86 A Medium FH 21
L X N Medium FH 21
L X A Medium FH 21
L 87 N Medium FH 21
L 87 Special Medium / High FH 21
L 88 N Medium / High FH 21
L 90 N High FH 21
L 89 N High FH 21
CONCENTRATIONNAME
VAPORIZABLE LIQUID FLUXES ECO SERIE
CONCENTRATION EN 1045 APPLICATIONS PACKING
- Homologated plastic tanks 5 Lt.
- Homologated plastic tanks 10 Lt.
- Homologated plastic tanks 20 Lt.
- Homologated steel tanks 25 Lt.
- Homologated steel drums 190 Lt.
Metal fumishings - Refrigeneretion- Air condition - Goldsmith
industries
Metal fumishings - Refrigeneretion- Air condition - Goldsmith
industries
For hydrogen machinesGoldsmith industries
ECOFLUX¤ High FH 21
ECOFLUX¤ MEDIUM Medium / High FH 21
ECOFLUX¤ 89 High FH 21
ECOFLUX¤ 88 Medium / High FH 21
ECOFLUX¤ 87 Medium FH 21
NAME
Alloys based on:copper phosphorus,copper phosphorus tin,silver copperphosphorus.For brazing copper tocopper or copper tobrass, using deoxidant.For conditioning andhydraulic use.
Not used for copper-copper brazing.
For copper-brassbrazingD39D60D4D31D26
FH51 - 94 6 - 710-880 CP 203
FH52 - 93,2 6,8 - 714-820 CP 202
FH49 - 92,5 7,5 - 710-750 CP 201
FH50 - 92 8 - 710-740 CP 201
FH55 - 86 7 7 650-700 CP 302
FH47 0,4 93 6,6 - 650-810
FH48 2 91,5 6,5 - 650-810 CP 105
FH45 5 89 6 - 650-810 CP 104
FH46 6 87 7 - 645-725 CP 302
FH35 15 80 5 - 650-800 CP 102
FH32 18 75 7 - 645-670 CP 101
Ag Cu P Sn
COPPER-COPPER BRAZING
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE EN 1044
RECOMMENDEDDEOXIDANTS APPLICATIONS
COPPER
PHOSPHORUS
p10_17ing 1 06 2006 7:53 Pagina 2
ALUMINIUM
AL 130 Powder - Dosable paste FL 10 515-630
AL 140 Powder - Dosable paste FL 20 515-630
DEOXIDANTS FOR ALLUMINIUM-ALLUMINIUM BRAZING
NAME SUPPLYFORM
EN 1045 MELTINGRANGE
PACKING
Powder and paste 1 Kg
Aluminium brazewelding.
Low temperaturealuminium brazing
Aluminium-magnesiumwelding.
Aluminium TIGwelding
Very low temperaturebrazing of Al-Al , Al-Cu,
Al-stainless steel.
Low temperaturealuminium brazing.
Wire-rods.
Wire-rods-powder.
Wire-rods.
Wire-rods.
Wire-rods-rings,flux incorporated.
Wire-rods-rings,flux incorporated.
AL 130
Not necessarybecause it isincluded into
the alloy.
ALL95 95 5 - 566-630 AL101
ALL87 88 12 - 577-582 AL104
ALL MG5 94,7 0,3 5 566-650
ALL99 99,5 0,5 - 660 -
ALL84S 22 72 397-483 -
ALL86S 90 10 575-590 AL103
ALL87S 88 12 575-585 AL104
AI Si Mg Zn
ALUMINIUM BRAZINGBRAZING
ALLOYCOMPOSITION
%MELTINGRANGE EN 1044
RECOMMENDEDDEOXIDANTS APPLICATIONS
SUPPLYFORM
p10_17ing 1 06 2006 7:53 Pagina 3
Alloys with a high silver content, small melting rangeexcellent capillarity and fluidity. Used for brazing thinjoints such as diaphragms, thermostats, etc.
T90 40 19 21 20 595-630 AG 304
T510 50 15 17 18 620-640 AG 301
Ag Cu Zn Cd
SILVER LOW TEMPERATURE BRAZING PASTES
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE EN 1044 APPLICATIONS
PASTE
Alloys with a high silver content, smallmelting range excellent capillarity andfluidity. Used for brazing thin joints suchas diaphragms, thermostats, electricalequipment etc.Due to their clear colour are used bysilver smith and glasses industry.
Alloy for double welding very tough.
T90S 40 30 28 Sn 2 640 - 700 AG 105
T99S 55 21 2 Sn 2 630 - 660 AG 103
T500 49 16 23 Mn 7,5-Ni 4,5 625 - 705 AG 502
T630 63 24 13 - 690 - 730 AG 202
T720 72 28 - - 780 AG 401
T68 20 45 35 - 690 - 795 AG 206
Ag Cu Zn Others
SILVER BRAZING PASTES
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE EN 1044 APPLICATIONS
p10_17ing 1 06 2006 7:54 Pagina 4
SOFT BRAZING PASTE
ST60 60 40 - 183-190Tin-lead based alloys.
ST100 100 - - 232
ST130 96,5 - Ag 3,5 221 Tin silver based alloys.
ST125 97 - Cu 3 230-250 Tin copper based alloy used as Pb alternative.
Sn Pb Others
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE APPLICATIONS
PASTE
p10_17ing 1 06 2006 7:54 Pagina 5
100 - - - 1083 CU 103 x x
9010 90 - - Sn 10 955 - 1000 CU 202 x x
6980 98 2 - - 1085 - 1100 CU 105 x x
9760 - 76 - Cr 14 - P 10 890 - x x
9824 - 82,37 4,5 970 - 1000 NI 102 x x
9708 - 71 10 Cr 19 1080 - 1135 NI 105 x x
9890 89 P 11 875 NI 106 x x
Cu Ni Si Others OIL WS
INDUSTRIAL BRAZING PASTESBRAZING
ALLOYCOMPOSITION
%MELTINGRANGE EN 1044
BINDERAPPLICATIONS
Silver alloy dosable flux.
Silver alloy dosable flux.
Brass alloy dosable flux.
Brass alloy dosable flux.
Brass alloy dosable flux.
D 10 Dosable paste - 160 - 300
D 12 Dosable paste - 160 - 300
D 32 Dosable paste FH 12 550 - 800
D 53 Dosable paste FH 20 780 - 950
D 50 Dosable paste FH 20 700 - 900
D B Dosable paste FH 20 750 - 1000
DOSABLE DEOXIDANTS
NAME SUPPLYFORM
EN 1045 TEMPERATURERANGE APPLICATIONS
PASTE
PASTERAME
Cr 7B 3,1 - Fe 3
C - 0,03
Iron or stainless stell component brazingin furnace with controlled atmosphere.
High temperature melting alloy for highresistance joint.
Low-melting, free-flowing filler metal forhoneycomb structures and thin-walledtube assemblies.Low-melting filler metal similar to 9760,higher mechanical resistance and highertemperature.
Filler metal with high mechanical resistanceand low base-metal penetration.
Free-flowing, low melting, chromium-freefiller metal. Minimizes base metal erosion.
p10_17ing 1 06 2006 7:54 Pagina 6
Copper phousphorusalloys.Useful for copper-copperor copper brass, brazingusing flux.
FH52 - 93,2 6,8 - 630 - 660 CP 202
FH49 - 92,5 7,5 - 710 - 750 CP 201
FH55 - 86 7 7 650 - 700 CP 302
FH46 6 87 7 - 645 - 725 CP 302
FH35 15 80 5 - 650 - 800 CP 102
FH32 18 75 7 - 645 - 670 CP 101
Ag Cu P Sn
COPPER PHOSPHORUS BRAZING PASTESBRAZING
ALLOYCOMPOSITION
%MELTINGRANGE EN 1044 APPLICATIONS
PASTE
p10_17ing 1 06 2006 7:54 Pagina 7
Dispenser valve for all kind of dispensing system manual.
Automatic dispenser valve for all kind of dispensing system.
Motorized paste dispensing equipment, to maintain a constantlevel of viscosity and supplied with paste level indicator.
Motorized paste dispensing equipment, to maintain a constantlevel of viscosity.
Paste dispensing equipment..
Medium size central body ideal for special paste dispensing.
Medium size central body, motorized to maintain a constantlevel of viscosity, ideal for special paste dispensing.
90000 Dispenser Valve 33-130 M
90003 Dispenser Valve 33-130
90174 Central body 140-380 MT LC
90173 Central dispenser 2P MT LC
90085 Central body 140-380 MT
90088 Central dispenser 2P MT
90002 Central body 140-380
90001 Central dispenser 2P
90086 Central body 102-250
90087 Central body 102-250 MT
PASTE DISPENSER
CODE NAME DESCRIPTION
PASTE
DISPENSER
p10_17ing 1 06 2006 7:54 Pagina 8
Bars, wire oncoils or on
spools.
Wire on coilsor on spools.
D14SD14FD15ND10D12
* ST125 97 - 3 230-250
* ST63 63 37 - 183
* ST60 60 40 - 183 - 190
* ST50 50 50 - 183 - 216
* ST40 40 60 - 183 - 238
* ST35 35 65 183 - 252
ST100 100 232
* ST130 96,5 Ag 3,5 221
* ST150 95 Ag 5 - 225 - 245
Sn Pb Cu
SOLDERING
BRAZINGALLOY
COMPOSITION%
MELTINGRANGE
SUPPLYFORM
RECOMMENDEDDEOXIDANTS
* These alloys can be supplied with an acid or neutral (colophony) deoxidant core.
Tin copper based alloyused as Pb alternative.
Tin-lead based alloys.
Food hollow-ware tinning.
Tin and silver alloyssuitable for stainlesssteel and silverware.
APPLICATIONS
TIN
D 14S Liquid 160 - 300 2 - 5 - 25 KgD 14F Liquid 160 - 300 2 - 5 - 25 KgD 15N Liquid 160 - 300 0,8 - 4 KgD 10 Dosable past 65 - 290 5 - 15 KgD 12 Dosable past 160 - 300 5 - 15 Kg
SOFT BRAZING DEOXIDANTS
NAME SUPPLY FORM TEMPERATURE RANGE PACKING
p10_17ing 1 06 2006 7:54 Pagina 9
We listen to you
“Average customer” does not exist for us,
every one is different and we know it.
Thus, before trying to sell anything to
anyone we start to listen
to possible problems, doubts or needs.
We check their processes and goals;
we work together to find out
the best solution.
The solution could be simple,
as it is possible that we met
a similar situation before.
It could also be that the solution may
ask us more effort, or the use of new
material, or the design of new machines
or alternative technologies
Whatever the solution is it always
begins with listening.
p18 19ing 1 06 2006 7:57 Pagina 2
p18 19ing 1 06 2006 7:57 Pagina 3
A.V. SALDATURE S.R.L.VIA DELL’INDUSTRIA, 620050 MEZZAGO (MI) ITALYTEL. 039/6020165FAX 039/[email protected] Fo
to e
gra
fica:
Stud
io G
iudi
cian
ni -
Mez
zago
-
Technical data into tables are indicative and can be modify without noticefrom A.V. Saldature S.r.l.Pictures table and everything appear into this catalogue is under copyright.
p1_20ing 1 06 2006 7:43 Pagina 2