AutoPIPE Vessel Quickstart

8/13/2019 AutoPIPE Vessel Quickstart

1/31


2/31

COPYRIGHT INFORMATION

TRADEMARK NOTICE

Bentley, the "B" Bentley logo, MicroStation, AutoPLANT and AutoPIPE are registered or non-

registered trademarks of Bentley Systems, Inc. or Bentley Software, Inc. All other marks are theproperty of their respective owners.

COPYRIGHT NOTICE

2013, Bentley Systems, Incorporated. All Rights Reserved.

Including software, file formats, and audiovisual displays; may only be used pursuant to applicab

software license agreement; contains confidential and proprietary information of Bentley Systems

Incorporated and/or third parties which is protected by copyright and trade secret law and may no

provided or otherwise made available without proper authorization.

Acknowledgments

Portions ObjectARX, the AutoCAD Runtime Extension programming environment,

Portions SolidWorks Application Programming Interface (API)

Portions Open Source XML Parser - Thai Open Source Software Center Ltd

Portions OpenGL Copyright 1992-1997 Sam Leffler, Copyright 1992-1997 Silicon Graphi

Inc

Portions Copyright 1991-1998, Thomas G. Lane

RESTRICTED RIGHTS LEGENDS

If this software is acquired for or on behalf of the United States of America, its agencies and/or

instrumentalities ("U.S. Government"), it is provided with restricted rights. This software and

accompanying documentation are "commercial computer software" and "commercial computer

software documentation," respectively, pursuant to 48 C.F.R. 12.212 and 227.7202, and "restricte

computer software" pursuant to 48 C.F.R. 52.227-19(a), as applicable. Use, modification,

reproduction, release, performance, display or disclosure of this software and accompanying

documentation by the U.S. Government are subject to restrictions as set forth in this Agreement a

pursuant to 48 C.F.R. 12.212, 52.227-19, 227.7202, and 1852.227-86, as applicable.

Contractor/Manufacturer is Bentley Systems, Incorporated, 685 Stockton Drive, Exton, PA 1934

0678.

Unpublished - rights reserved under the Copyright Laws of the United States and International tre

END USER LICENSE AGREEMENT

To view the End User License Agreement for this product, review eula.pdf.


3/31


4/31

TABLE OF CONTENTS

AutoPIPEVessel Quick Start Guideii

CHAPTER 4:STARTING AUTOPIPEVESSEL V8I

STARTINGAUTOPIPEVESSEL..................................................................................4-2

WELCOMETOAUTOPIPEVESSELLICENSING .......................................................4-2


5/31AutoPIPEVessel Quick Start Guide

DOWNLOAD GUIDE

The following provides general instructions with which to download

application(s) required to install AutoPIPE Vessel on a single computer

system. The images and version numbers and products depicted may not be

up to date but the general procedure remains correct. You will need your

Bentley login and password information to log into the Bentley website in

order to download applications or create CDs to be mailed to you.

LOG INTO DOWNLOADS SELECTSERVICES:DOWNLOADS/MYSELECTCD 1-2DOWNLOAD BENTLEY AUTOPIPEVESSEL 1-4DOWNLOAD UPDATES 1-6DOWNLOAD SELECTSERVER 1-8

1


6/31

DOWNLOAD GUIDELOG INTODOWNLOADS SELECTSERVICES:DOWNLOADS/MYSELECTCD

AutoPIPEVessel Quick Start Guide1-2

Note The images and version numbers and products depicted in this Quick Start Guide maynot be up to date but the general procedures remains correct.

If you are part of the QA&R program, any installation from a downloaded file for AutoPIPE

Vessel or ATS is strictly forbidden and does not constitute a valid installation or verification.

QA&R users must install the applications from the CDs received from the Bentley QA&R

manager.

If you do not have logon information, please contact your local Bentley office at 1-800-Bentl

(236-8539), outside the United States +1 610-458-5000, or please click here:

http://www.bentley.com/en-US/Corporate/Contact+Us/Find+Local+Office/.

If you have your email address and need your password (or have forgotten your password), cl

here: http://www.bentley.com/forgotpassword/.

To obtain Technical or Licensing Support for your products, please submit a service ticket he

http://www.bentley.com/serviceticketmanager/.

For product activation and additional licensing information, please click here:

http://www.bentley.com/activate.

LOG INTO DOWNLOADS SELECTSERVICES:DOWNLOADS/MYSELECTCD

1. Open internet explorer web site http://selectservices.bentley.com/en-US/.

2. Under the Support & Services tab select Software Downloads.


7/31

DOWNLOAD GLOG INTO DOWNLOADS SELECTSERVICES:DOWNLOADS/MYSELECT

AutoPIPEVessel Quick Start Guide

3. Log into the web site.

Note Each company has an onsite Bentley administrator that was designated when an accounis first created. If you do not have a current log on, please contact your onsite BentleyAdministrator who can assist you with the correct information and permissions.Otherwise, contact Bentley directly (see links atop of document).


8/31

DOWNLOAD GUIDEDOWNLOAD BENTLEYAUTOPIPEVESSEL


DOWNLOAD BENTLEY AUTOPIPEVESSEL

1. After the following page displays, select the My Select CD hyperlink.

2. In the "Search By:" area, select radio button next to "Product", and select "Bentley AutoPfrom drop down list.

3. In the Filter By area, Files Posted within last, change from 6 months to ALL.

4. Press the Search button at the bottom of the web site.


9/31

DOWNLOAD GDOWNLOAD BENTLEY AUTOPIPEVE


5. Place a check in the box next to the most recent version of AutoPIPE Vessel (see date coluand confirm that any dependencies have also been selected

Note Far right column provides information about which OS the application has been tested

on. Installing the application on any other OS will be at your own risk and will not besupported.

6. Scroll to the bottom of the web page, press Continue button located in the bottom rightcorner.

7. Select Delivery method, chose Downloador Burn CD(an official CD will be mailed). PresContinue button.

8. Download Procedure. Read the Legal Terms of Use statement. If you agree, press theAccept button. Then press the Advanced Download Manager button. Provide path namwith which to download the file(s) and finally press the Start Download button.

9. Burn CD Procedure. Select the Continue button, provide shipping information, and presComplete button.


10/31

DOWNLOAD GUIDEDOWNLOAD UPDATES


10. Other applications besides AutoPIPE Vessel to complete an installation:

SELECTserver (i.e. Bentley hosted SELECTserver, Local Managed SELECTserver, or Nlock license). Contact the Bentley SELECTserver group for available options and instruc

to install

DOWNLOAD UPDATES

AutoPIPE Vessel updates are created as needed. Notification of these updates are included in

AutoPIPE Vessels Help> AutoPIPE Vessel Newsfeed, b) Bentley Press release or c) Newsl

which is sent to those who have signed up to receive Select Newstream for Plant products.

Otherwise, it is the end users responsibility to periodically check for product updates and new

releases.

To subscribe / unsubscribe to Newstream,

1. Visit https://login.bentley.com/personalinfo/index.cfm .

2. Log onto the web site.

3. Click on Tell us more about you, link near the bottom of the page.

4. Select the Newsletters Tab at the top of the page.


11/31

DOWNLOAD GDOWNLOAD UPDA


5. Place a check in the box next to NewsStream for Plant, NewsStream for Building andPress Releases.

6. Press Submit button.

DOWNLOADING UPDATES

1. Use instructions in previous section above to log in to the Bentley web site and navigate toSupport Download web page.

2. In the Search Byarea, Select radio button next to Product, and select Bentley AutoPIPEVessel from drop down list.

3. In the Filter By section, change "Download Category" to "Enhancements and Updates", aFiles Posted within last to ALL.


5. Place a check in the box next to the name of the file and confirm that any dependencies haalso been selected.


12/31

DOWNLOAD GUIDEDOWNLOAD SELECTSERVER



7. Select Delivery method, chose Downloador Burn CD(an official CD will be mailed). PreContinue button.

8. Download Procedure. Read the Legal Terms of Use statement. If you agree, press theAccept button. Then press the Advanced Download Manager button. Provide path namwith which to download the file(s) and finally press the Start Download button.

9. Burn CD Procedure. Select the Continue button, provide shipping information, and preComplete button.

DOWNLOAD SELECTSERVER

1. In the "Search By:" area, Select radio button next to "Product", and select "SELECT Servefrom drop down list

2. In the Filter By area, Files Posted within last, change from 6 months to ALL.


4. Place a check in the box next to the most recent version SELECTserver to download (seerelease date).

Note Suggest contacting the Bentley SELECTserver group to discuss which version of theapplication is required for your installation.


13/31

DOWNLOAD GDOWNLOAD SELECTSER


Note Far right column notifies you of the OS for which the application is certified on. Installingthe application on any other OS will be at your own risk and will not be supported


6. Select Delivery method; you can chose Download or Burn CD (an official CD will be maiPress Continue button.

7. Download Procedure. Read the Legal Terms of Use statement. If you agree, press theAccept button. Then press the Advanced Download Manager button. Provide pathnamedownload the file to and finally press the Start Download button.

8. Burn CD Procedure. Select the Continue button, provide shipping information, and presComplete button.

9. Other applications required to complete an installation.

Bentley AutoPIPE Vessel V8i.



INSTALLATION GUIDE

The following provides general instructions to install AutoPIPE Vesssel on a

single computer system. The images depicted may not be up to date but the

general procedure remains correct. All downloaded installation files should

be placed on the computers desktop or CD placed into the appropriate drive

before starting (do nottry to install the application from a network location).

The procedure requires that person with Admin rights be logged on before

initiating the installation. The installation of AutoPIPE Vessel or AutoPIPE

Vessel ATS assumes that a Bentley hosted SELECTserver, Local Managed

SELECTserver, or Node lock license has already been installed prior to the

following procedure. Contact the Bentley SELECTserver group for available

options and instructions to install SELECTserver.

INSTALL BENTLEY SELECTSERVER 2-2INSTALL FROM DOWNLOADED FILES 2-2INSTALL FROM CD 2-2INSTALL BENTLEY AUTOPIPEVESSEL SELECTSERIES 2-2INSTALL AUTOPIPEVESSEL UPDATES 2-5

2


15/31

INSTALLATION GUIDEINSTALL BENTLEY SELECTSERVER



INSTALL BENTLEY SELECTSERVER

The installation of AutoPIPE Vessel or AutoPIPE Vessel ATS assumes that a Bentley hosted

SELECTserver or Local Managed SELECTserver has already been installed and configured.

not, contact Bentleys SELECTserver group or License department for available options and

instructions to install SELECTserver.

For standalone AutoPIPE Vessel installations; SELECTserver is not required, but a Nodelock

license is. Contact your Bentley onsite manager or Bentley License Team for details on how

receive a Node lock license file (*.XML).

INSTALL FROM DOWNLOADED FILES

1. To install Bentley applications, ensure you have logged in to the computer with an accouthat has administrative privileges. If you are unable to log in with a suitable account, the

contact your network administrator to login and perform the installation.

2. All download files from above should be placed onto the computer where the applicationare to be installed; suggest the desktop or create a folder to copy the files to (do nottry to

install the application from a network location). Use My Computer to browse to downlo

files and double click on the file *.exefile to start the installation. Continue to the next

section.

INSTALL FROM CD

1. To install Bentley applications, ensure you have logged in to the computer with an accouthat has administrative privileges. If you are unable to log in with a suitable account, the

contact your network administrator to login and perform the installation.

2. Insert the CD, should automatically run an introduction application from which you can sthe installation. If the introduction application does not begin, then use My Computer t

browse to the CD and double click on the file Setup.exe which is in the product> instal

folder of the CD.

INSTALL BENTLEY AUTOPIPEVESSEL SELECTSERIES

Note The application should not be installed from a network location; suggest that the EXEfiles are on the users system before starting the installation.

If a previous version of AutoPIPE Vessel V8i is present, using Control panel > Add/remove

programs utility uninstall the following applications:


16/31

INSTALLATION GINSTALL BENTLEY AUTOPIPEVESSEL SELECTSE


all previous versions of AutoPIPE Vessel

PCF to NTL translator

ADLPipe to NTL translator

Bentley STRAIT

Remove remaining folders in c:\Bentley\ AutoPIPE Vessel and Translator folders

This procedure assumes that SELECTserver has been install and configured, If not please cont

Bentley License group or Bentley SELECTserver group to assist you.

If you are part of the QA&R program, any installation from a downloaded file for AutoPIPE

Vessel or ATS is strictly forbidden and does not constitute a valid installation or verification. A

QA&R user must install the applications from the CDs received from Bentley systems QA&R

manager

Must log onto users computer with full Administration rights. If you are unable to log in with asuitable account, then contact your network administrator to login and perform the installation

1. Close all other applications currently running and then navigate to the EXE file downloadusing the procedure above or CD and double click on it to start the installation process.

2. Nothing will appear while the installer is starting up. In a short time the following will apprecommend accepting all the default settings.


17/31

INSTALLATION GUIDEINSTALL BENTLEY AUTOPIPEVESSEL SELECTSERIES



18/31



LICENSE SETUP GUIDE

SELECTLICENSE -STANDALONE WORKSTATIONS (NODE LOCKED) 3-2SELECTLICENSE -NETWORK WORKSTATIONS 3-5

3


20/31

LICENSE SETUP GUIDESELECTLICENSE -STANDALONE WORKSTATIONS (NODE LOCKED)



There are 2 options for licensing Bentley applications: Standalone or Networked workstations

Standalone workstation - computer system that requires an XML license file to be imported in

License Management Tool in order to license installed applications. The XML file is checked

against a Bentley Hosted or User Deployed SELECTserver account.

Networked workstation - computer system that is connected temporarily / permanently to a Be

Hosted or User Deployed Server on a network. While connected, license can be checked in /o

required from a pool of available licenses on the contract.

All license management questions/modifications are handled by the Bentley License team and

Account Managers not AutoPIPE Vessel TSG. Your account manager can also assist with

application pricing.

SELECTLICENSE -STANDALONE WORKSTATIONS (NODE LOCKED)

OVERVIEW

An internet / network connection is not required to authenticate the license used by AutoPIPE

Vessel V8i. In order to use the application beyond Demo mode, requires a valid SELECT lice

file (*.XML) with AutoPIPE license options checked out for extended period of time. A stanalone license is locked to a specific computer and cannot be moved. If the license needs to be

moved, contact person who provide the XML file for an updated file.

INSTRUCTIONS

1. Install AutoPIPE Vessel per above procedure.

2. Acquire a valid Bentley SELECT license file (*.xml) from your Bentley On-site Admin,hosted server, deployed server, Bentley License Team, or Account Manager. Prior to get

an XML file, user may need to provide a computer name where the application is to be

installed.

3. Copy the license file in your hard disk. Go to Start > Programs > Bentley Engineering>AutoPIPE Vessel > License Management Tool as shown below, OR Start AutoPIPE Ves

select File> License Management Tools.


21/31


22/31

LICENSE SETUP GUIDESELECTLICENSE -STANDALONE WORKSTATIONS (NODE LOCKED)


8. The security is now in place. The installation is complete and AutoPIPE Vessel is ready use.

Note When AutoPIPE Vessel is launched a SELECTservice warning message may appear,click Yesand a local host server name will be set for the standalone license to be activwhich will allow the program to be authorized.

If updating the node lock to a Network license server, complete the following:

1. Select Tools > Options from the License Management Tool.

2. Update the Server Name and Site Activation Key information with the appropriate valuesshown in the following figure.


23/31

LICENSE SETUP GSELECTLICENSE -NETWORK WORKSTAT


3. Press the Test Connection button to confirm the information entered.

4. To view the Server name and Site activation Key, select:

Start > Programs > Bentley Engineering > AutoPIPE> License Management Tool

4. After the application opens: Tools> Options>

Server name :

Bentley Hosted server name = selectserver.bentley.com

Or

Company Deployed server name = company license server name, Contact your IT departm

Site Activation Key:

These are unique keys provided by the Bentley License team. Contact your Bentley on-sit

administrator or Bentley License department for this information.

SELECTLICENSE -NETWORK WORKSTATIONS

OVERVIEW

Installations which use Bentleys Hosted Server or a Customers Deployed Server to authentic

licenses to run AutoPIPE Vessel V8i. An internet / network connection is not required to

authenticate the licenses.

Acquire the following information from your Bentley Onsite Admin, AutoPIPE Vessel softwar

supplier, or Bentley License Department

Hosted SELECTserver Name or customers Deployed Server Name

Site Activation key


24/31

LICENSE SETUPGUIDE

SELECTLICENSE -NETWORK WORKSTATIONS


INSTRUCTIONS

1. Install AutoPIPE Vessel per the above instructions, but do not start the application as the

licensing portion has not been configured at this point and will revert to Demo mode.

2.Download the SELECTserver as previously described above.

3. Install Bentley SELECTserver.

Note Full details of the SELECTserver installation are included in the download.

Contact the Bentley License department or Bentley SELECTserver group for technic

support.

4. After the Bentley SELECTserver has been correctly installed, go to Start > Programs >

Bentley Engineering> AutoPIPE Vessel > License Management Tool as shown below, O

Start AutoPIPE Vessel, select File> License Management Tool.

OR

5. First time this command issued a warning may appear, press OKbutton.

6. After the License Management Tool dialog screen appears, select Tool> Options>.

7. Enter the Server Name and Site Activation Key information provided to you:


25/31

LICENSE SETUP GSELECTLICENSE -NETWORK WORKSTAT


Note Bentley hosted server name = selectserver.bentley.com, while deployed server namesare handled by your company. Enter Proxy Configuration information as required by youIT department.

8. Click on the Test Connection button to confirm that the entries are correct. The followinshould be displayed.

Note If not, verify data entered and server connection (contact Bentley license department).

9. Click on the OKbutton to accept the settings which then display the License ManagemenTool with all the licenses that are available in the top window. AutoPIPE Vessel will only

in Demo mode until 1 or more license is available for checkout.


26/31



STARTING AUTOPIPEVESSEL V8i

STARTING AUTOPIPEVESSEL 4-2WELCOME TO AUTOPIPEVESSEL LICENSING 4-2

4


28/31

STARTING AUTOPIPEVESSEL V8ISTARTING AUTOPIPEVESSEL



STARTING AUTOPIPEVESSEL

AutoPIPE Vessel should only be started after all the previous sections have been completed.

Missing any of the above steps could result in AutoPIPE Vessel reverting to Demo mode.

Start AutoPIPE Vessel:

1. Double clicking the desktop Icon, and select the program AutoPIPE Vessel V8i

Or

2. Select, Start> Programs> Bentley> Bentley Engineering> AutoPIPE Vessel V8i > andselect the program AutoPIPE Vessel V8i

WELCOME TO AUTOPIPEVESSEL LICENSING

1. Each time AutoPIPE Vessel is started the application will display the licensing splash scras shown: (unless Show licensing on startup is unchecked).

2. Depending on your licenses available in License Management Tool, select the proper radbutton.


29/31

STARTING AUTOPIPEVESSELWELCOME TO AUTOPIPEVESSEL LICEN


3. If your license contract has the add-on design codes feature, these will be shown as availagreen lights.

4. After pressing OK button, the application will

a. Verify License Management Tool is installed

b. Check available license for the product selected

c. If available, check out the license

d. Reducing the available pool licenses by 1

e. AutoPIPE Vessel will then be ready for use.

5. However, if a valid license was not found available (ie. License pool = 0, or application is

listed in LMT), the application will revert to DEMO mode, as indicated by the followingmessage:


30/31


31/31

STARTING AUTOPIPEVESSELWELCOME TO AUTOPIPEVESSEL LICEN

b. Under Site Configuration:

i. Check out restrictions for specific applications or employees.

Note Bentley recommends using the Do not Apply Checkout Restrictions option if no checkout restrictions are configured.

AutoPIPE Vessel Quickstart

Documents

Transcript of AutoPIPE Vessel Quickstart