Dyno X is the world’s most affordable chassis dynamometer and proudly made in the USA. It comes Equipped standard with a FRENELSA eddy brake. Dyno X is capable of supporting speeds up to 155+ MPH and 800+ HP. The maximum axle weight is 6,500 lbs and the track width range is 36”-86”. DYNO X was designed for a variety of different testing scenarios -- FWD/RWD Cars, Sport Compacts, Trucks, Motorcycles and ATV’s. Low on price but high on features, these new VS (Value Series) line up of dynamometers include zinc plated knurled rollers. It is equipped with a Frenelsa eddy brake and you are able to perform acceleration, step, sweep and steady-state tests. You are able to troubleshoot drivability issues with its Bi-Directional roller for testing of both RWD and FWD vehicles. Auto Weather Station automatically compensates for temperature, pressure, and humidity variations. Compact footprint allows convenience of positioning in both smaller workshops or a home garage. Dynocom’s new VS (Value Series) line up of dynamometers are avaible in two-wheel and awd drive configurations. Our dynamometers are designed, developed, engineered, manufactured, and assembled by our highly skilled team in the USA.

OPTIONS: • Aluminum Ramps • Above Ground Kit

Price includes: • Chassis Dynamometer with Frenelsa Eddy Brake • Software with manual• Controller • 2 Differential Analog Inputs• DC-JBox • Atmospheric Module (Humidity, Barometric Pressure And Temperature ) • 6 Month Mechanical Warranty • 6 Months of Free Technical Support • One Year Free Software Updates • Dynocom Racing Banner • 2 x Dynocom Racing T Shirts • Training at our USA location

AUTOMOTIVE DYNAMOMETERS & DIAGNOSTIC TEST EQUIPMENT

THE GLOBAL STANDARD

SPECIFICATIONSMax Speed 155+ MPH

Max Vehicle Weight 12,000 lbsMax Axle Weight 6,500 lbs

Roller Diameter 8.5” InchesRoller Length 35” Inches

Track Maximum 86” InchesTrack Minimum 14” Inches

Equivalent Linear Approx. 550 lbsMaximum Operations Amps 20 AMPs @ 220 VAC

Physical DimensionsWidth 35.5” Inches

Height 12” InchesHeight w/eddy brake 17.50” Inches

Length 116” InchesWeight 2200 lbs

DYNO X

THE DYNOCOM ADVANTAGE

FlexibilityAll Dynocom chassis dynamometers are able to be installed in a pit or above-ground behind a standard 4-post lift. Tight on space? No need to worry, the bi-directional roller allows for testing FWD and RWD easily, and we also offer removeable lightweight aluminum ramps.

Plug and PlayPrewired internal eddy brake with digital electronic controller includes a 220/240V 20AMP standard electrical plug for true PLUG-&-PLAY operation.

Patent Pending Taper Shaft DesignDynocom’s patent pending CNC taper shaft allows for the highest load and speed -a first in the dyno industry.

FRENELSA eddy brake infoDynocom integrates only the highest quality parts -- the Dyno X utilizes only FRENELSA eddy brakes which are recognized as the world’s highest quality. Be wary of competitor units that use the cheapest available retarders which are only a fraction of the cost of our eddy brakes and are of significantly low-er quality. Less expensive eddy brakes also have significantly less load-holding capacity. The quality of the eddy brakes will be a reflection of how much trouble-free life your dyno is likely to provide with 24 bit A/D convertors.

State of the Art Roll Speed SensorsDynocom dynamometers utilize the most advanced roll speed sensors in the industry. Dynocom’s sensor samples at over 50 samples/RPM.Our system collects data via an interpret based method VS. competitors polling method. We also employ a 24 bit A/D converter for the utmost in precision and speed.

AWD DYNO X (Speed Sync Standard)Combined with Dynocom’s ultra-fast, micro-electronic designed PAU controller, the system provides precision “speed synchronization” and load optimization between the front and rear wheel driven dynamometer rollers eliminating anypotential speed differential which may cause damage to the differential of the vehicle. Uses phase angle modulation, which is superior to competitors method.

Toll Free US/Canada: 1 (866) 436-DYNOInternational: (817) 284-8844Fax: (817) 284-8847www.dynocom.net