Automation and Drives SIMATIC WinAC PC-based Control SIMATIC WinAC Why PC-based Automation? PC-based...
-
Upload
jack-patrick -
Category
Documents
-
view
228 -
download
1
Transcript of Automation and Drives SIMATIC WinAC PC-based Control SIMATIC WinAC Why PC-based Automation? PC-based...
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 1 © Siemens AG 2004 - Subject to change without prior notice
PC-basedControl All about SIMATIC WinAC
Automation and Drives
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 2 © Siemens AG 2004 - Subject to change without prior notice
Innovation in PC technology
Automation technology will participate in the rapid innovation
in PC technology!Why PC-basedAutomation?
Statement from Intel: „22 Ghz in 2008“
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 3 © Siemens AG 2004 - Subject to change without prior notice
Integration of automation solution on a hardware platform
on one single PC
Cost reduction through integration of
Why PC-basedAutomation? Visualization Control
Data processing Networks
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 4 © Siemens AG 2004 - Subject to change without prior notice
Openness of PC technology
open standards
Increased flexibility through use of
OfficeControl application
Why PC-basedAutomation?
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 5 © Siemens AG 2004 - Subject to change without prior notice
Totally Integrated Automation
Manufacturing ExecutionSystems (MES)
TotallyIntegratedAutomation
Control
Enterprise ResourcePlanning (ERP)
MES Solutions
Inbound LogisticsProcess
DiscreteOutbound Logistics
ProductionWorkflow
Design andEngineering
Installation andCommissioning Operation Maintenance
Modernizationand Upgrade
ProductionLife Cycle
PC-based Control with SIMATIC
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 6 © Siemens AG 2004 - Subject to change without prior notice
Technische Folien
Engineering with STEP 7
SIMATIC S7/C7PC basedControl
EmbeddedControl
Version 5.3
Re-use of available SIMATIC Know how
Save your software investment
PC-based Control with SIMATIC
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 7 © Siemens AG 2004 - Subject to change without prior notice
Technical slides
Standard interface inclusive
Production visualizationSIMATIC WinCC
flexible
Process visualizationSIMATIC WinCC
Visualization system
on Windows
3rd party
SIMATIC communication
WinAC
Flexibility through use of open standards
PC-based Control with SIMATIC
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 8 © Siemens AG 2004 - Subject to change without prior notice
SIMATIC NET OPC
Unified OPC-Solution for SIMATIC
Improved Performance(about 5x – 10x)
Improved Configuration with STEP7
Variable-Browsing
OPC-Interfaces:
Data Access
Alarms&Events
Successor of SIMATIC Computing
PC with Windows
PC Internal
CPWinAC
…New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 9 © Siemens AG 2004 - Subject to change without prior notice
Multi-PLC Support
Reduced HW-cost,reduced space (less PCs)
Communication using BSEND/BRCV
Distributed control power
< 4 WinAC Slot PLC
1 WinAC Software PLC +< 3 WinAC Slot PLC
External Power Supply: 1 PS Extension Board per WinAC Slot required
More compact and cost-effective Automation Solution
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 10 © Siemens AG 2004 - Subject to change without prior notice
More Motion Solutions with WinAC Slot
FM 353/354
Support of additional FMs:
FM 353: Stepper Motor
FM 354: Servo Motor
Point to point positioning
Complex traversing patterns
Motion control solutions with SIMOVERT MASTERDRIVES
Electronic Gear
Motion with WinAC
ET200M
MASTERDRIVES
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 11 © Siemens AG 2004 - Subject to change without prior notice
Operation with Simple PC User Privileges
Installation: Admin or Local Admin
privileges required
Operation: User or Power User
privileges sufficient RUN/STOP/MRES Read diagnostic buffer Restoring of archive files Tuning
Safety: Panel pass word
Simplified Operation, Maintenance and Service
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 12 © Siemens AG 2004 - Subject to change without prior notice
Firmware-Update via File
Start FW update via menu command
No more memory card needed
No more creation of „update memory card“ with STEP7
Note: new HW release 3 required
Upgrade of HW for existing WinAC Slot PLCs required
Simplified Maintenance and Service
FW Update ...
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 13 © Siemens AG 2004 - Subject to change without prior notice
WinAC PN Option für WinAC Basis
Modular, distributed Automation with WinAC Basis
Integration of PROFInet into WinAC standard products
Used for Component based Automation
Replacement of WinAC PN V1.1
Option package for WinAC Basis
Ethernet
PROFIBUS
Components with distributed I/O on
PROFIBUS
Innovations and Trends with PC based Control Products
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 14 © Siemens AG 2004 - Subject to change without prior notice
Performance for WinAC Software PLCs
Notes for Measurement:
32000 Operations(32 loops à 1000)
Performance values depending on processor type!
Performance values depending on program structure!
0
500
1000
1500
2000
2500
3000
3500
4000
Bool Integer Float
µs
WinAC Basis V3.0 @1.26Ghz PIII
WinAC RTX V4.0 @1.2Ghz Celeron
WinAC RTX V4.1 @1.2Ghz Celeron
0
200
400
600
800
1000
1200
1400
1600
1800
Bool Integer Float
WinAC Basis V3.0 @3.06Ghz Xeon
WinAC RTX V3.1 @3.06Ghz Xeon
WinAC RTX V4.0 @3.06Ghz Xeon
WinAC RTX V4.1 @3.06Ghz Xeon Performance
x 2
1,2 GHz Celeron
3 GHz Xeon (P
4)
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 15 © Siemens AG 2004 - Subject to change without prior notice
Integration of T-Kit und ODK:WinAC ODK V4.1
One C/C++ engineering package forr WinAC Software and Slot PLCs
Wizard supported programming for run-time interfaces for WinAC Software and Slot PLCs:
ODKV4.1
Microsoft Visual Studio
Custom Code Extension(„ODK-Interface“)
Shared Memory Extension(„T-Kit-Interface“)
Controller Management Interface (NEW)
Soft
Slo
t
Wiz
ard
Integration of Custom Functions
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 16 © Siemens AG 2004 - Subject to change without prior notice
WinAC ODK V4.1
WinAC Software PLCV4.1
WinAC Slot PLCV3.4
CCX SMXCMI SMXCMI
T-Kit DLL
WinAC Slot T-Kit V3.3
Custom Application(C/C++)
WinAC ODK V4.0
Custom Application(C/C++)
WinAC ODK V4.1
Custom Application (C/C++)New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 17 © Siemens AG 2004 - Subject to change without prior notice
CCX: Custom Code Extension Interface
Backward compatible to existing ODK Interface New:
Operand Access –access to WinAC data at any time Programming with Visual Developer‘s Studio .net
Compatibility WinAC ODK V4.0 can still be used with WinAC
Basis/RTX V4.1 Applications created with WinAC ODK V4.0 can be used
with WinAC Basis/RTX V4.1 without any restrictions Applications created with WinAC Basis/RTX ODK V3.0
can be used with WinAC V4.1 with the same restrictions as with WinAC Basis/RTX V4.0
New SIMATICWinAC features
Extend your PLC funktionality
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 18 © Siemens AG 2004 - Subject to change without prior notice
SMX: Shared Memory Extension Iterface
Enhancement of T-Kit interface New:
Simplified DLL interface Supports Multi-CPU operation Support of WinAC Software PLCs planed
Compatibility: WinAC Slot T-Kit V3.3 can be used with WinAC Slot
V3.4 Applications created with WinAC Slot T-Kit V3.3 can be
used with WinAC Slot V3.4 w/o restrictions; WinAC Slot will provide a “Compatibility DLL”
New SIMATICWinAC features
High performance data interchange between Windows-applications and SIMATIC WinAC
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 19 © Siemens AG 2004 - Subject to change without prior notice
CMI: Controller Management Interface
New: enables integration of WinAC CPU Panel functionality into a custom application
RUN/STOP/LED-status Archiving/reloading of PLC programs Start and shutdown of the PLC
Examples: Complete integration of CPU Panel functions into a HMI
application („Service- und Maintenance pages“) Remote CPU Panel Implementation of specific user rights Automatic reloading of PLC program updates
New SIMATICWinAC features
Flexible operation of the PLC´s
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 20 © Siemens AG 2004 - Subject to change without prior notice
Overview new WinAC Features
WinAC Soft
WinAC Slot
Integration of SIMATIC NET OPC Server Multi-CPU Support More Motion Solutions Operation with Simple PC User Privileges Firmware-Update via File PROFInet Support (CbA) Performance x2 Integration of T-Kit into WinAC ODK V4.1
New SIMATICWinAC features
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 21 © Siemens AG 2004 - Subject to change without prior notice
Technical slides
SIMATIC WinAC Basis V4.1
Based on native Windows standard
I/O connection via PROFIBUS-DP (12 Mbit/s)
Retentive data with UPS support(UPS = uninterruptible power supply)
Full utilization of PC memory
Saving of data and program on hard disk
Highest flexibility for theautomation solution throughintegration of windows-applications
Product overview
For data-intensive tasks
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 22 © Siemens AG 2004 - Subject to change without prior notice
Technical slides
SIMATIC WinAC RTX V4.1
For applications with high requirements to determinism and real-time behavior
Based on standard Windows NT and Real Time eXtension from VenturCom
I/O connection using PROFIBUS DP card (12 Mbit/s)
Up to four PROFIBUS lines possible
Retentive data with UPS support(UPS = uninterruptible power supply)
Utilization of PC main memory
Saving of data and program on hard disk
For real-time tasks
Product overview
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 23 © Siemens AG 2004 - Subject to change without prior notice
Technical slides
SIMATIC WinAC Slot V3.4
Available in two versions:WinAC Slot 412-2DP (128 kB per code/data)WinAC Slot 416-2DP (1.6 MB per code/data)
Control independent of Windows 2000 or Windows XP
Set of commands and performance correspond to the powerful S7-400 CPUs
Data retention through battery backup Two DP interfaces onboard Optional 24 V power supplyProduct
overview
With own safety on board
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 24 © Siemens AG 2004 - Subject to change without prior notice
Technical slides
SIMATIC WinAC ODK 4.1
SIMATIC WinAC ODK is an engineering package which supports the development of C/C++ applications for WinAC Software and Slot PLCs.
Extend the WinACcontrol-functionality
Accelerate theData-Interchange
Integration of PC-Soft andHardware into WinAC
OB 1
LAD,STL,
CSLCFC,
Graph7,
Higraph
SCL
C++
WinACrange
Product overview
improve the productivity through Integration of C++ applications
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 25 © Siemens AG 2004 - Subject to change without prior notice
World of PC-based Automation
World of PC-based Automation
The complete PC-based solution from one source!
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 26 © Siemens AG 2004 - Subject to change without prior notice
3rd party add-ons
Incorporation of otherfieldbuses Integration of various
data formats
Linking of automationtechnology and instrumentation
World of PC-based Automation
Other vendors use WinAC's openness to achieve integration into the SIMATIC automation concept!
Integration of 3rd party add on´s
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 27 © Siemens AG 2004 - Subject to change without prior notice
PC-based Competence Centers
Detroit
Milan
Cologne
Shanghai
Support
Worldwide project support for implementation of your solution from feasibility analysis up to implementation!
Worldwide Competence in PC-based automation
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 28 © Siemens AG 2004 - Subject to change without prior notice
Internet / knowledge base
Support
The latest informationon PC-based Automation
from Siemens canalways be found here
www.pcbasedautomation.com
Automation and Drives
SIMATIC WinAC
PC-based ControlSIMATIC WinACWhy PC-basedAutomation?
PC-based Control with SIMATIC
Product overview
World of PC-based Automation
Support
New SIMATIC WinAC features
A&D AS, 07/2004, Chart 29 © Siemens AG 2004 - Subject to change without prior notice
PC-basedControl The Integration-Plattform for yourPC-based Solution
Automation and Drives