Automatic Stirring Gas Coupling
Transcript of Automatic Stirring Gas Coupling
Safest way to connect porous plugs
Automatic Stirring Gas Coupling
Steelmaking Plants
Automatic Stirring Gas Coupling for Steel Ladles – Safe and Reliable
Steel bath stirring is a basic function for reaching the required chemistry and temperature of a steel heat. Stirring shall be available during the entire ladle metallurgy cycle from tapping to casting. Besides the porous plugs, the reliability of the stirring gas connection to the ladle is of crucial importance. Manual connection of the gas supply to the ladle is a high risk operation.
Paul Wurth’s quick and reliable automatic gas coupling system allows all coupling operations in steel-plants to be remote controlled and automatically executed.
Functionality
The system consists of one upper coupling part on each ladle and one lower coupling part fixed to each treatment station or on each ladle transfer car.
Both parts are movable, the upper female cone allowing a vertical displacement and the lower male cone allowing a transverse shifting in two directions from a zero position, thus assuring a tight connection despite differences in the posi-tioning tolerances of the ladles.
All parts are fabricated from high heat resistant steel.
As the ladle is lowered onto the treatment station or transfer car, the stirring gas flow starts in due time before full engagement of the two cones, thus providing for clean mating surfaces and a subsequent tight connection.
Application
The automatic coupling of the stirring gas to the porous plug allows following operations possibilities:
` Stirring during tapping of the BOF or EAF vessel
` Stirring during ladle transfer to the different treatment stations (ladle furnace / alloying station / wire injection / powder spreader...)
` Stirring at the vacuum degassing vessel
` Stirring at the ladle turret
` Stirring during slag skimming (ladle in tilted position)
` Automatic connection to two or three porous plugs can be ensured by one single coupling. Separate flow regulation follows via remote control.
Designed Advantages
` No manual intervention is required for connecting flexible gas hoses:
�Best available safety solution!
` No external power needed.
` Allows a large displacement in all directions.
` High reliability of connections system up to 20 bar.
` Self cleaning at each connection.
` Universal stirring gas coupling for the whole steel shop.
` Low maintenance and ownership costs.
EAFBOFPSLTWILFVDCSCCAC
Electric arc furnaceBasic oxygen furnacePowder spreaderLadle turretWire injection Ladle furnaceLadle degassing stationConditioning StationContinuous casterAutomatic coupling station
EAF
BOF
AC
AC
Ladle Car Coupling Station
Several gas feed & coupling stations can be placed along a ladle cars’ railway track through the entire plant, thus ensuring stirring gas availability and ladle metallurgy flexibility at single treatment stands wherever required.
Steelplant Solutions
AC
PS
LF
CS
WI CC
VD
LT
Ladle car coupling station Ladle coupling
The Paul Wurth Group is today one of the world leaders in the design and supply of complete plants, systems and processes as well as specialised mechanical equipment for
the iron & steel industry: Blast Furnaces & Auxiliary PlantsCoke Making PlantsDirect Reduction PlantsEnvironmental Protection, Recycling & Energy-Saving Technologies
other industries:Solutions for Decentralised Energy ProductionIntralogistics Solutions for Heavy LoadsEngineering & Project Management for Civil Construction and Infrastructure Projects
Feasibility Studies – Conceptual, Basic and Detail Engineering – Project Management – Plant and Components Supply – Turnkey Projects – Digital Solutions – Assistance in Plant Assembly and Commissioning – Technology and Operations Consultancy – On-site and Remote Operational Assistance – After-sales Services
Engineering & Technology worldwide
[email protected] • www.paulwurth.com
EUROPE
Paul Wurth S.A.Luxembourg, LUXEMBOURGPhone: (+352) [email protected]
Paul Wurth Italia S.p.A.Genoa, ITALYPhone: (+39) 010 640 [email protected]
Paul Wurth Deutschland GmbHWiesbaden, GERMANYPhone: (+49) 611 44 885 [email protected]
Essen, GERMANYPhone: (+49) 201 245 [email protected] Paul Wurth, a.s.Ostrava, CZECH REPUBLICPhone: (+420) 595 155 [email protected]
Paul Wurth Moscow Representation Offi ceMoscow, RUSSIAPhone: (+7) 495 721 [email protected]
Paul Wurth KovrovKovrov, Vladimir region, RUSSIAPhone: (+7) 49232 [email protected]
Paul Wurth Metallurgical Services LLCKaluga, RUSSIAPhone: (+7) 351 799 60 [email protected]
Paul Wurth Ukraine Representation Offi ceMariupol, UKRAINEPhone: (+380) 629 41 18 [email protected]
Paul Wurth Energy S.r.lCarpenedolo (BS), ITALYPhone: (+39) 030 9697 [email protected]
CTI Systems S.à r.l.Lentzweiler, LUXEMBOURGPhone: (+352) 2685 [email protected]
Joint company of Dango & Dienenthal andPaul Wurth:
TMT – Tapping Measuring TechnologyLuxembourg, LUXEMBOURGPhone: (+352) 26 19 20 0
Siegen, GERMANYPhone: (+49) 271 4014 [email protected] www.tmt.com
Joint Company of SAB and Paul Wurth:
VCL – Valve Competence LuxembourgGrevenmacher, LUXEMBOURGPhone: (+352) 27 68 [email protected] • www.vcl.lu
AMERICAS
Paul Wurth Inc.Valparaiso, Indiana, USAPhone: (+1) 219 850 [email protected]
Paul Wurth do BrasilBelo Horizonte, BRAZILPhone: (+55) 31 3228 [email protected]
Paul Wurth do Brasil Montagens e Manutenção LtdaBelo Horizonte, BRAZILPhone: (+55) 31 3228 [email protected]
Paul Wurth de Mexico SA de CVAtizapan, MEXICOPhone: (+52) 55 1106 [email protected]
ASIA
Paul Wurth Metal Technology(Beijing) Co., LtdBeijing, CHINAPhone: (+86) 10 8405 [email protected]
Shanghai Paul Wurth Metallurgical EquipmentManufacture Co., LtdShanghai, CHINAPhone: (+86) 21 [email protected]
Paul Wurth India Pvt. LtdGurgaon, INDIAPhone: (+91) 124 [email protected]
Paul Wurth International S.A.Taiwan BranchKaohsiung, TAIWANPhone: (+886) 7 33 93 [email protected]
Paul Wurth International S.A.Korea BranchSeoul, REBUBLIC OF KOREAPhone: (+82) 2 553 [email protected]
Paul Wurth Vietnam Co., LtdHo Chi Minh City, VIETNAMPhone: (+84) 8 73 000 [email protected]
Joint company ofIHI Corporation and Paul Wurth:
PAUL WURTH IHI Co., Ltd.Tokyo, JAPANPhone: (+81) 3 6630 [email protected]
Publisher: Paul Wurth S.A. – Communications & Marketing • 32, rue d’Alsace • L-1122 Luxembourg
© Copyright 2007-2020 Paul Wurth S.A. – all rights reserved
Non Contractual Data: Paul Wurth believes that the data contained in this folder are correct and accurate, but cannot guarantee same or better performances for any specific site without a detailed quote. Patents and Patents pending. — Paul Wurth equipment and processes are protected in many countries by patents.
Paul Wurth and the Paul Wurth Logo are trademarks of Paul Wurth S.A. and may be registered in your jurisdiction.