Automatic solder dipping machine

http：//www.smthelp.com

Auto-Dip Soldering machineS-500S


····Are you still welding circuit board in manual?Are you still welding circuit board in manual?

····Still in the circuit board for manual welding, a waste of Still in the circuit board for manual welding, a waste of time, waste of artificial ideas?time, waste of artificial ideas?

High labor costs

Low efficiency

Our solutionOur solution：：


Why choose us?The electricity cost per hour at around 1 degree, 8 hours oxide is not more than 0.2 KG, no technical operation, length of the foot plug-in welding, welding can work at the same time different batches, and no edge can also production, production without consumption, tin furnace capacity: 80 KG.

Auto-Dip Soldering machine S-500S


The product descriptionThe product description：：

Short feet welding The long feet

Clamp products as well as the automatic slag removal function

Products through the needle bed according to the setting Angle of

dip soldering

The recycling boxThe recycling box


Product set according to time to stop floating in tin stove in tin stove

Products through the needle bed according to the set point of view

to take off the tin

Products and automatic slag removal function again


The recycling box

The recycling box

The recycling box


Product featuresProduct features：：


• Meet the circuit board, LED, toys board, transformer and solder products commonly use (with appropriate jig)

• Improve the quality of welding, imitation of manual welding

• Improve the production efficiency, can weld batch products at the same time, increase compared to the manual

• Unibody design, simple and convenient operation

• Additional preheating function and timing function (optional)

• The custom number of slag removal• Both intelligent temperature control +

PLC control system• Overtemperature protection function• Cast postures heating element, which

nearly 40% energy saving


Product parametersProduct parameters：：• PCB Size：350X300MM• Speed is adjustable• Solder Dwell heigh：0-70mm• Solder Dwell Time：1-10 sec• Temperature control using PID control• Temperature range: 0-450 ℃• Preheat time: 0-120 s• Automatic removal cycle: 11 s• Dip soldering cycle: 16 s• Tin furnace, furnace adopts 316 stainless steel titanium

(selected), ground temperature by K type thermocouple• Solder heigh：50-60mm• Solder Pot Size: 400 * 340 * 80 mm• Overall Dimensions: 700 * 750 * 620 mm• Weight: 75 kg• Power Requirements：220V, 50/60 Hz,3.6KW


Successful casesSuccessful cases：：

Electrical home appliances control panel

Switching power supply board


Industrial control board

Security and alarm panelsPower amplifier and tuning bedplate

LED lights and traffic signal board

Auto-Dip Soldering machine S-500S

Southern Machinery

Want to know more informations,please contact:

Chan：Skype :chan12477357Emal :[email protected] Q :2355736092Shenzhen Southern Machinery Sales and Service Co., Ltd


Automatic solder dipping machine

Documents

Transcript of Automatic solder dipping machine