Automatic Poor Quality
-
Upload
qwerty187190 -
Category
Documents
-
view
181 -
download
9
description
Transcript of Automatic Poor Quality
A AUTOMATIC POOR QUALITY REJECTION USING CONVEYOR
AUTOMATION.
bstract
To perform the Automatic Poor Quality Rejection using conveyor
automation.
SYNOPSIS:
The Automatic poor quality rejecter sense and deliver the right
product and ejects outs the poor quality products.
The product is moved to the Sensor Cabin to verify the quality
through the Conveyor. The Dimension of the product is checked using the Sensor
Interface. If the product has no accurate dimension the rejecter rejects the product
to the Rejecter Bin. If the product has high quality the conveyor moves it to the
Accepted Bin. The motor is used to move the Conveyor that carries the product.
The Micro Controller is used to sense the product using sensor interface, control
the rejecter using rejecter control, control the motor using motor driver. The Power
Supply provides power to the all the parts of the systems
Micro controller
A microcontroller (sometimes abbreviated µC, uC or MCU) is a
small computer on a single integrated circuit containing a processor core, memory,
and programmable input/output peripherals. Program memory in the form of NOR
flash or OTP ROM is also often included on chip, as well as a typically small
amount of RAM. Microcontrollers are designed for embedded applications, in
contrast to the microprocessors used in personal computers or other general
purpose applications.
Microcontrollers are used in automatically controlled
products and devices, such as automobile engine control systems, implantable
medical devices, remote controls, office machines, appliances, power tools, toys
and other embedded systems. By reducing the size and cost compared to a design
that uses a separate microprocessor, memory, and input/output devices,
microcontrollers make it economical to digitally control even more devices and
processes. Mixed signal microcontrollers are common, integrating analog
components needed to control non-digital electronic systems.
Some microcontrollers may use four-bit words and operate at
clock rate frequencies as low as 4 kHz, for low power consumption (single-digit
milliwatts or microwatts). They will generally have the ability to retain
functionality while waiting for an event such as a button press or other interrupt;
power consumption while sleeping (CPU clock and most peripherals off) may be
just nanowatts, making many of them well suited for long lasting battery
applications. Other microcontrollers may serve performance-critical roles, where
they may need to act more like a digital signal processor (DSP), with higher clock
speeds and power consumption.
Motor Drive
A motor drive, in the field of photography, is a powered film
transport mechanism. Historically, film loading, advancing, and rewinding were all
manually driven functions. The desires of professional photographers for more
efficient shooting, particularly in sports and wildlife photography, and the desires
of amateur and novice photographers for easier to use cameras both drove the
development of automatic film transport. Some early developments were made
with clockwork drives, but most development in the field has been in the direction
of electrically driven transport.
At first, motor drives were external units that attached to the
basic camera body, normally beneath it, with an interface consisting of a physical
drive socket and some electrical contacts to signal the drive when to actuate.
Beginning in the late 1970s, motor drives began to be integrated into cameras
themselves—at first, in compact cameras for the beginner market, and by the
1980s, in amateur-grade and later professional-grade single lens reflex cameras. By
the 1990s, the vast majority of 35mm cameras had integral motor drive, and the
feature found its way into some medium format cameras as well.
Motor drives for compact and amateur cameras wind slowly
—shot-to-shot intervals of approximately a second are commonplace. Professional
grade cameras are faster, with speeds up to 10 frames per second. The first 35 mm
SLR to achieve such a shooting speed was Canon's F-1 High Speed Motor Drive
camera, first developed for the 1972 Winter Olympics in Sapporo, Japan. To
enable this speed and allow the photographer to more easily track the moving
subject, this camera used a fixed, semi-transparent pellicle mirror instead of a
moving mirror. Later special Canon models used similar mechanisms to achieve
such speeds, while cameras with moving mirrors reached approximately 5 frames
per second by the 1980s. Today, the fastest professional models from Canon and
Nikon achieve approximately 10 frames per second with a moving mirror.
In the digital camera era, some users continue to refer to continuous
shooting modes as "motor drive". Many camera models refer to different shooting
modes—single shot, burst, continuous, self timer—as drive modes, thus keeping
alive the terminology of film. An external battery grip is occasionally referred to as
a motor drive as it tends to increase the frame rate.
Rejector pin
Our huge assortment of Ejector Pins and other automotive
components like bushes are manufactured from high grade ferrous and non ferrous metals such
as steel, iron and other alloys. These are used in injection molds and dies in various engineering
industries all over the world. All ejector pins are manufactured as per the DIN 1530 standard.
Our range includes ejector pin, hds ejector pin, blade ejector pin, hot dies steel ejector pins and
square ejector.