Automatic Night Light
-
Upload
shihab-hasnine -
Category
Education
-
view
746 -
download
63
Transcript of Automatic Night Light
Dark Dark Detecting LED Detecting LED
using using LDR andLDR and
555 Timer IC555 Timer IC
IntroductionComponentsDiscussion about key componentsCircuit diagramWorking procedureDiscussionConclusion
Contents
1.LDR2.LED3.555 TIMER IC4.RESISTORS (1k,4.7k,47 k ohm)5.CAPACITORS(1 nf,1uf)6.BATTERY(9V)6. AND SOME CONNECTING WIRE
1.555 Timer IC
LED
LDR
Circuit
Discussion1.The circuit diagram of dark detecting LED. This
circuit shows how we can convert a simple astable mode circuit to a “dark sensor”. We just need to add an LDR and a resistor in the circuit, then it simply works as dark detector.
2.A general purpose LDR is used for sensing the light.
3.When proper light is falling on the LDR its resistance is very low.
4.When there is no light the LDR resistance increases.5. At this time the IC is triggered and glows the LED attached with the circuit.
conclusion555 Timer is a highly stable device for generating
accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired.