Automated Analysis of Explosives in Soil Samples
-
Upload
shimadzu-scientific-instruments -
Category
Technology
-
view
319 -
download
1
Transcript of Automated Analysis of Explosives in Soil Samples
1 / 9
Automated SFE-SFC Analysis of Explosives in Soil SamplesWilliam Hedgepeth, Ken Tanaka, Shimadzu Scientific Instruments, Inc., Columbia, Maryland
2 / 92 / 12
Introduction
There are a large number of explosives-contaminated sites in the US, Europe, and Asia. High levels of explosives in soil can threaten the health of humans, livestock, and wildlife. A number of remediation efforts are underway, which require the analysis of explosives in soil samples.
Recently, a new technique was introduced the allows the automated supercritical extraction and SFC analysis of samples with minimal sample preparation and handling requirements to save analyst time and sample preparation expenses.
This technique was applied to the analysis of explosives in soil samples and showed good recoveries of the explosives tested in a number of different soil samples.
Automated analysis of up to 48 samples is possible without the need for manual sample preparation to allow quick screening of explosives in numerous soil samples.
3 / 93 / 9
Experimental
Fig.1 shows a diagram of the SFE-SFC system that was used in this experiment. This system consists of a combination of supercritical fluid chromatography and extraction systems. Method development was initially performed with the SFC method scouting system that automatically allows screening of up to 12 analytical columns with a number of different modifiers.
After determination of the optimal column and modifier combination for an explosives mix (AccuStandard M-8330) was completed, the analysis was moved to the SFE portion of the system for study of the explosives mix from a variety of soil types.
The SFE portion of the system allows the automated analysis of up to 48 soil samples by combining the sample preparation portion with the chromatographic analysis. Samples are extracted from extraction vessels and automatically transferred to an analytical column for analysis.
4 / 94 / 12
Instrument Design
1A: Supercritical fluid chromatography (SFC) system for analytical method development
1B: On-line Supercritical fluid extraction/chromatography (SFE/SFC) system
5 / 95 / 9
Method Development
Flow rate: 3 mL/minDetector: Photodiode arrayColumn Temp: 35°CBackpressure: 15 MPa
Nexera UC BasicNexera UC PFPNexera UC DiolNexera UC Ethyl PyridineNexera UC NaphthylNexera UC Nitro
A: CO2B: MeOHGradient: 1 to 10 min, 0 to 40% MeOH
Columns: 4.6 x 250mm, 5 um
Mobile Phase
Conditions
6 / 96 / 12
SFC Method Scouting
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 min
-40000
-30000
-20000
-10000
0
10000
20000
30000
40000
50000
60000
70000
80000
90000
100000
110000
120000
130000
140000
150000
160000
170000
180000
190000
200000
210000
220000
230000
240000
uV
Data6:explosives_Diol_MeOH_0_40_018.lcd PDA Ch1 254nm,4nm Data5:explosives_Naphthyl_MeOH_0_40_016.lcd PDA Ch1 254nm,4nm Data4:explosives_EP_MeOH_0_40_014.lcd PDA Ch1 254nm,4nm Data3:explosives_Nitro_MeOH_0_40_012.lcd PDA Ch1 254nm,4nm Data2:explosives_PFP_MeOH_0_40_010.lcd PDA Ch1 254nm,4nm Data1:explosives_Basic_MeOH_0_40_008.lcd PDA Ch1 254nm,4nm
Basic
PFP
Diol
Ethyl Pyridine
Naphthyl
Nitro
SFC Column Scouting of Explosives Mix
7 / 97 / 12
Optimized SFC Chromatogram
1. 2-NT 2. NB 3. 2,6-DNT 4. 3-NT 5. 4-NT 6. TNT 7. 1,3-DNB 8. 2,4-DNT 9. 1,3,5-TNB 10. 4a-2,6-DNT 11. Tetryl 12. 2a-4,6-DNT 13. RDX
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 min
7500
10000
12500
15000
17500
20000
22500
25000
27500
30000
32500
35000
37500
40000
42500
45000
47500
50000
52500
uVData1:explosivesmix-Nitro-2020-2.lcd PDA Ch1 254nm,4nm
1
2
3
4 5
6
7
8
9
10
11
12
13
Nexera UC Nitro Column
8 / 98 / 12
Samples
AccuStandard explosives standards M-8330-05 were used to prepare an explosives mixture. One gram of each soil sample was spiked with 100 uL of a 50 ppm explosives mixture.
Standards:RDX, TNT, HMX, Tetryl, Nitrobenzene, 1,3-Dinitrobenzene, 2-Nitrotoluene, 3-Nitrotoluene, 2,4-Dinitrotoluene, 4-Amino-2,6-dinitrotoluene, 2,6-Dinitrotoluene, 1,3,5-Trinitrobenzene, 2-Amino-4,6-dinitrotoluene
Soil Samples: 1. Clean Sandy Loam2. Clean Clay Loam3. Clean Sandy Soil4. Clean Loam Soil
9 / 99 / 12
SFE-SFC Conditions
Flow rate: 5 mL/min95/5 CO2/MeOH0-3 min: Static extraction3-6 min: Dynamic extraction
Column: Nexera UC NitroFlow rate: 3 mL/min6-15 min: 0 to 40% MeOH17-25 min: Wash and equilibration
Extraction Conditions Chromatography Conditions
10 / 910 / 12
Blank Soil Sample Extracts
7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 min
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
50000
55000
60000
65000
70000
75000
80000
85000
uV
Data4:CSL-100uL-blank-09.lcd PDA Ch1 254nm,4nm Data3:CLS-100uL-blank-08.lcd PDA Ch1 254nm,4nm Data2:CSS-100uL-blank-07.lcd PDA Ch1 254nm,4nm Data1:CCL-100uL-blank-06.lcd PDA Ch1 254nm,4nm
Clay Loam
Sandy Soil
Loam Soil
Sandy Loam
SFE extracts of blank soil types
11 / 911 / 9
Clean Clay Loam Extract
6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 min
-15000
-10000
-5000
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
50000
55000
60000
65000
70000
75000
80000
85000
90000
95000
100000
105000
uV
Data2:CCL-100uL-spike-02.lcd PDA Ch1 254nm,4nm Data1:CCL-100uL-blank-06.lcd PDA Ch1 254nm,4nm
Clean Clay Loam Soil Blank
Spiked Soil
12 / 912 / 9
Clean Sandy Loam Extract
Clean Sandy Loam Soil Blank
Spiked Soil
6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 min-10000
-5000
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
50000
55000
60000
65000
70000
75000
80000
85000
90000
uV
Data2:CSL-100uL-spike-01.lcd PDA Ch1 254nm,4nm Data1:CSL-100uL-blank-09.lcd PDA Ch1 254nm,4nm
13 / 913 / 9
Clean Loam Soil Extract
Clean Loam Soil Blank
Spiked Soil
7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 min
-10000
-5000
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
50000
55000
60000
65000
70000
75000
80000
85000
90000
95000
100000
uV
Data2:CLS-100uL-spike-04.lcd PDA Ch1 254nm,4nm Data1:CLS-100uL-blank-08.lcd PDA Ch1 254nm,4nm
14 / 914 / 9
Clean Sandy Soil Extract
Clean Sandy Soil Blank
Spiked Soil
6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 min
-10000
-5000
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
50000
55000
60000
65000
70000
75000
80000
85000
90000
95000
100000
105000
110000
115000
120000
125000uV
Data2:CSS-100uL-spike-03.lcd PDA Ch1 254nm,4nm Data1:CSS-100uL-blank-07.lcd PDA Ch1 254nm,4nm
15 / 915 / 9
Spiked Soil Extracts Overlay
Spiked explosives standard into four different soil types
6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 min
-100000
-75000
-50000
-25000
0
25000
50000
75000
100000
125000
150000
175000
200000
225000
250000
275000uV
Data4:CLS-100uL-spike-04.lcd PDA Ch1 254nm,4nm Data3:CSS-100uL-spike-03.lcd PDA Ch1 254nm,4nm Data2:CCL-100uL-spike-02.lcd PDA Ch1 254nm,4nm Data1:CSL-100uL-spike-01.lcd PDA Ch1 254nm,4nm
Clean Sandy Loam
Clean Clay Loam
Clean Sandy Soil
Clean Loam Soil
16 / 916 / 9
Linearity Study
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 min
-70000
-60000
-50000
-40000
-30000
-20000
-10000
0
10000
20000
30000
40000
50000
60000
70000
80000
90000
100000
110000
120000
130000
140000
150000
160000
170000
180000
190000
200000
210000uV
Data3:stdmix-200uL-extract-split-5.lcd PDA Ch1 254nm,4nm Data2:stdmix-100uL-extract-split-4.lcd PDA Ch1 254nm,4nm Data1:stdmix-50uL-extract-split-2.lcd PDA Ch1 254nm,4nm
50 uL spike
100 uL spike
200 uL spike
One gram of soil was spiked with 50, 100, and 200 uL of explosives mix
17 / 917 / 9
Linearity Results
0.0 25.0 50.0 75.0 100.0 125.0 150.0 175.0 Conc.0
25000
50000
75000
100000
125000
150000
175000
200000
225000
250000
Area
2-NTY = aX + ba = 1263.65b = -8615.43R^2 = 0.9998975R = 0.9999488
0.0 25.0 50.0 75.0 100.0 125.0 150.0 175.0 Conc.0
50000
100000
150000
200000
250000
300000
350000
400000
450000
500000
550000
600000
Area
0.0 25.0 50.0 75.0 100.0 125.0 150.0 175.0 Conc.0
25000
50000
75000
100000
125000
150000
175000
200000
Area
TNTY = aX + ba = 3113.98b = -3707.87R^2 = 0.9985081R = 0.9992538
1,3,5-TNBY = aX + ba = 1066.51b = -5951.52R^2 = 0.9998268R = 0.9999134
18 / 918 / 9
A variety of soil samples showed little interference with spiked explosive standards.
Clean Loam Soil provided poor recovery of the late eluting RDX peak.
Good reproducibility was observed with the explosive standard extracts from a variety of soil samples.
Good linearity was observed for the explosive compounds.
Automated SFE-SFC can be a quick way to screen up to 48 soil samples for explosives in a variety of soil types with minimal sample prep.
Discussion
19 / 9
Thank you for viewing this presentation. Should you have any questions or require additional information about our research, products or services, please visit our support page: www.ssi.shimadzu.com/support/
@shimadzussiFollow us on Twitter
Need More Info?