Auto-Blast Complete Containment...

2910 Schoeneck Road, Macungie, PA 18062Toll Free: 1-800-346-7805 Fax: 610-966-2287www.wenzco.com email: [email protected]

November 2015 Sale Flyer

Standard and custom sizes available on all equipment.Call today for a quote on a package to fit your needs!

Customized Systems Available To MeetAll Your Blasting RequirementsContainment system options include:

■ Auto-Blast Smart Curtain ■ Steel Blast Enclosure■ Abrasive Blaster ■ Abrasive Recovery System

■ Dust Collector…and more!

Auto-Blast Complete Containment System

Click here to see it in action!

END OFYEAR SALE!Ends 12/18/15

https://www.facebook.com/Wenzco-730207070457338/

https://www.facebook.com/Wenzco-730207070457338/?ref=bookmarks

Toll Free: 1-800-346-7805 Fax: 610-966-2287 www.wenzco.com2 Toll Free: 1-800-346-7805 Fax: 610-966-2287 www.wenzco.com

APD Flatbed Monument Cutter Model 827

Now you can utilize every inch of your stencil material by cutting the full width of the stencil! Cost saving! No need to purchase computer punched stencil material and no waste when using scrap pieces for dates and

smaller inscriptions. Save time! No more sprocket adjustments required. Stencil is vacuumed down and not moving. Achieve accurate cutting of the smallest details. Compatible with all monument software programs.

Convenient tool holder and round knife cut-off for stencil.

Cutting area: 30.78” x 60”Cutting speed: 33.5”/sec.

Maximum material width: 33”Power input: 6 amp@115 volt, 3 amp@230 voltConfiguration closed loop digital servo system

Software language driver: compatible with software using HPGL format




3 Toll Free: 1-800-346-7805 Fax: 610-966-2287 www.wenzco.com

Hirons Model “J” Automatic Blaster with Blast Booth, Abrasive Recovery System and Cart and Track System

Blast BoothThe Model J Blaster easily mounts to the front of this prefab Blast Booth. The blast booth is mounted above the Abrasive Recovery System. Steel frame construction on either end of booth, with rubber sheeting to protect from blast erosion, hinged doors and predrilled holes for fast and easy assembly.

Abrasive Recovery SystemContinuously reclaim, move and lift the used abrasive within your blast room to the storage hopper for refilling your blast tank with this Abrasive Recovery System. This eliminates sweeping and shoveling of abrasive during blasting cycles, reducing downtime and increasing productivity. System is powered by a 120 volt electric connection.

Cart And Track SystemSystem consists of steel tracks, support frame and wheeled blast cart. Cart with six v-groove steel wheels and heavy roller bearings easily rolls in and out of the booth and the tracks extend 8ft. beyond the end of the booth.

Air Requirements2 CFM

Electrical Requirements7 Amp/120 Volt, 1 PH

Model J Automatic is designed for the constant motion of automatic blasting and features full range of speed and independent control of horizontal and vertical motion. It is not an attachment or power assist for a manual adjustment curtain. This unit can be installed on your present set-up or moved later for future plans.

AVAILABLE IN 2 SIZES:

8 FT. MODELwith 60” Horizontal Travel

10 FT. MODELwith 84” Horizontal Travel

or




Wenzco Supplies Steel Blast Rooms

Includes: Heavy duty 14 gauge constructed steel walls, roof, hinged entry door (placement can be at either end of the room), connection for duct work and air inlet vents. Rooms are constructed with opening for placement of your blast curtain or automatic. Shipped unassembled for economical truck shipping, ease of unloading and installation into your

building. Rooms are available painted for an extra fee.

7'-6" H x 7'-6" W

Wenzco Blast Room Curtain/Front

Includes: Glass viewing window, Sight screen to protect glass, Lights for greater visibility and Counter weight to allow curtain to be raised and lowered easily to accommodate for a variety of blasting heights.

Constructed of very heavy duty 14 & 16 gauge steel. Ships assembled,

shipping weight 970 lbs.

Room Size: 8'-0" long x 5'-6" wide x 7'-6" high*Opening for 7'-6" curtain with or without an ABC automatic or an 8 ft. Hirons automatic.

Room Size: 10'-0" long x 5'-6" wide x 7'-6" high*Opening for 8 ft. or 10 ft. Hirons automatic, 10’ ABC automatic or 7'-6" manual curtain

Room Size: 12'-0" long x 5'-6" wide x 7'-6" high*Opening for 10 ft. Hirons, 10' ABC automatic or 7'-6" manual curtain

CUSTOM HEIGHTS AVAILABLE!

Custom Sized Blast Rooms Available Upon Request






■ High efficient cartridges for filtration efficiency of 99.7% against1/2 micron particles

■ Filters are cleaned with a reverse pulse of compressed aircontrolled by sequential timer and solenoids.

■ Filtered air can be returned to your shop in most applications.■ Abrasive resistant 8” diameter air inlet to extend filter life■ Acoustical dampering package standard with unit

■ All models designed to operate on single or 3 phase■ Attachment for 5 gal. bucket (on 1250 cfm) or 55 gal. drum to

collect dust■ Standard electrical package includes soft motor starting, ramp

acceleration, digital led display, motor protection and more.■One year warranty

1250 CFM 2 HP Dust Collector................................. Reg. $4,850.00 $4,400.002500 Cfm 5 HP Dust Collector .................................. Reg. $8,950.00 $8,400.004900 Cfm 10 HP Dust Collector ............................... Reg. $16,955.00 $15,714.009000 Cfm 20 HP Dust Collector ............................... Reg. $25,650.00 $23,285.0012000 Cfm 25 HP Dust Collector .......................... Reg. $32,350.00 $29,650.00

Wenzco Supplies Reverse Pulse Cartridge Dust Collectors

Features Include:

Other Sizes Available!




Sullivan Palatek Air CompressorsThe ultimate performance rotary screw air compressors!

These industrial air compressor features include standard

230/460/575 3 phase 60 cycle voltage, air-cooled aftercooler, auto/dual control, full voltage

starter, heavy-duty intake air filter, inlet modulation control and deluxe gauge panel.

Boss Bullet 2 Rotary Screw Air Compressor

Model CFM HP Motor Speed (RPM) Dimensions (LxWxH) Weight (LBS.)

25DG 105 25 1750 64” x 33” x 37” 950

30DG 120 30 1750 64” x 33” x 37” 990

40DG 160 40 1750 65” x 35” x 37” 1220

50DG 225 50 1750 65” x 34” x 43” 1320

Other Sizes Available from 5 HP to 450 HP

■Gasoline

■ 25 HP

■ 70 CFM @ 100 PSI

■ Skid Mounted

■ Optional WheelPackage Available

Weight405 lbs.

Dimensions45"L x 20"W x 30"H

Reg. $8,995.00

$8,400.00






Marco Abrasive Blast Machines

MODEL 35

MODEL 150

150LB Capacity, with moisture separator, mixing valve, 25 ft. of 1/2”

I.D. coupled blast hose, (2) 1/8” &(2) 5/32” type 1 ceramic nozzles.

Available with or withouta Deadman Shutoff

35LB Capacity, with moisture separator, mixing valve, 10 ft. of 1/2” I.D. coupled blast hose and (2) 1/8” type 1 ceramic nozzles.

Available with or without a Deadman Shutoff

Marco 350 and 650 blasters come standard with pneumatic remote controls, inlet and outlet valves, muffler, abrasive trap, 50’ twinline hose and pneumatic deadman handle. Bantam metering valve for precise abrasive metering capabilities. 6” x 8” inspection door for easy maintenance, 1-1/2” valves and external fittings for higher production and greater safety.

MODEL 350 MODEL 650

Wenzco Pneumatic Abrasive Pick-UpRefill Your Blast Machine with Abrasive “Quick And Easy”

Vacuum Hose

Floor Hopper

Pick-Up Tube

StorageTank

Vacuum Head

Our pneumatic abrasive pick-up ends the hand lifting of abrasive when refilling the blast machine. The pickup would be placed above your blast

machine. Your air compressor does the work for you!

Equipment includes:Venturi Type Vacuum Head

Storage tankPick-Up Tube

Floor Hopper and 16-1/2 ft. Length of 2” DiameterVacuum Hose

Floor hopper and storage tank are both equipped with removable screens.

Customized Packages Are Available To Meet Your Requirements!




Tiger Truck Cranes

Tiger cranes are designed with the operator in mind and take crane functionality to the next level.

With a Tiger crane you will see and feel the difference!

High quality telescoping boom cranes available in Electric, Electric Hydraulic & Hydraulic with capacities from 2,000 to 14000 lbs.

and boom lengths from 3’-0” to 29’-0”.

Model Capacity Span Reg. Price

2060 2000 LB. Manual Extension to 5’-0” $3,699.00 $3,150.002085 2000 LB. Manual Extension to 10.5’ $3,999.00 $3,350.00


3215E 3200 LB. Hydraulic Extension to 15’-0” $11,899.00 $10,385.00

4027E 4000 LB. Hydraulic Extension 7’-4” to 11’-10” plus Manual Extension 11’-10” to 16’-6” $12,999.00 $11,350.00

5031E 5000 LB. Hydraulic Extension to 21’-0” $17,959.00 $15,250.006541E 6500 LB. Hydraulic Extension to 21’-0” $18,799.00 $16,450.00


3215 3200 LB. Hydraulic Extension to 15’-0” $15,499.00 $12,889.005031 5000 LB. Hydraulic Extension to 21’-0” $19,389.00 $16,859.006541 6500 LB. Hydraulic Extension to 21’-0” $20,299.00 $17,775.007543 7500 LB. Hydraulic Extension to 30’-0” $25,599.00 $22,265.008051 8600 LB. Hydraulic Extension to 21’-0” $21,429.00 $18,750.001061 11,000 LB. Hydraulic Extension to 21’-0” $24,499.00 $21,650.001069 11,000 LB. Hydraulic Extension to 29’-0” $28,599.00 $25,355.00

ELECTRIC CRANES

ELECTRIC HYDRAULIC CRANES

HYDRAULIC CRANES





Auto-Blast Complete Containment...

Documents

Transcript of Auto-Blast Complete Containment...