AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRy AusRAIL Capability... · AusRAIL 2013...

AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRyAUSRAIL PLUS 2013, 26-28 November, Sydney convention centre

© Commonwealth of Australia

This work is copyright. Apart from any use as permitted under the Copyright Act 1968, no part may

be reproduced by any process without prior written permission from the Commonwealth. Requests

and inquiries concerning reproduction and rights should be addressed to the Department of

Industry, GPO Box 9839, Canberra ACT 2601.

Disclaimer:

“The Australian Government as represented by the Department of Industry, and on behalf of the

Rail Suppliers Network Australasia, the NSW Government Department of Trade and Investment,

the Australasian Railway Association, the Australian Trade Commission and the Industry Capability

Network (‘the collaborating parties’), has exercised due care and skill in the preparation and

compilation of the information and data in this publication. Notwithstanding, the Commonwealth

of Australia, its officers, employees, agents and the collaborating parties disclaim any liability,

including liability for negligence, loss howsoever caused, damage, injury, expense or cost incurred

by any person as a result of accessing, using or relying upon any of the information or data in this

publication to the maximum extent permitted by law. No representation expressed or implied is

made as to the currency, accuracy, reliability or completeness of the information contained in this

publication. The reader should rely on their own inquiries to independently confirm the information

and comment on which they intend to act.”

ISBN 978-1-925092-09-7

AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRyAUSRAIL PLUS 2013, 26-28 November, Sydney convention centre

Proudly supported by:

“This directory has been developed as a platform for the firms participating on the Rail Suppliers Network Australasia (RSNA) stand at AusRAIL Plus

2013 to provide introductory information about their work to event participants. The information in the directory has been provided by the participating

firms and has not been independently verified by the event supporters. The directory is intended to complement the participating firms’ attendance at

AusRAIL Plus 2013 as a way to advertise their services and provide attendees with contact information which may be useful after the event.”

4 RAIL INDUSTRY CAPABILITY DIRECTORY

The Services Offering

The RSNA services have been developed based on its mission statement

that says “The Rail Suppliers Network Australasia seeks to ensure the

continuity, growth, strength and success of the rail supply industry in

Australia and New Zealand.” This will be achieved through:

• Facilitating access to business opportunities in the local and

international markets;

• Providing advice to companies who wish to develop their activities

within the market and access government’s grants, financial services

and export assistance;

• Facilitating opportunities for companies to present their services to

other organisations; and

• Facilitating opportunities for companies to form technology or

service based clusters for both local and international market.

RAIL SUPPLIERS NETWORK AUSTRALASIA

4

The Australasian Railway Association (ARA) is pleased to announce

the establishment of the Rail Suppliers Network Australasia (RSNA),

formerly known as the Australasian Rail Industry Small Enterprises Group

(ARISEG).

The new look and feel came as a result of the group conducting a

customers’ survey in order to develop a new strategy that better serves the

needs of small to medium enterprises in the rail industry.

The new logo reflects a fresher look displaying cogs in different sizes

and colours representing different sizes and types of business in the rail

industry that work together to drive the industry.

The new direction is categorised into a four-part-framework below.

1. Globally competitive, at home and abroad.

2. Understanding the supply chain and resolving complexities.

3. Clustering approach and innovation.

4. Political advocacy.

5

Australian manufacturing is changing. It is

important, more than ever, to secure our industry’s

future in areas of new and improved opportunities.

I have been working on behalf of Government, to

ensure Australian rail firms are prepared to meet

global challenges by focusing on areas of our

competitive advantage. Supporting firms with

world-leading technologies has been key in helping

ensure the rail sector can meet the future needs of

the global industry. It is those Australian rail firms

that will help position the industry for growth.

Many of these innovative Australian firms are on display at the Rail Suppliers

Network Australasia pavilion at this year’s AusRAIL conference.

On the pavilion, Australian firms will be showcasing their cutting edge

solutions around advanced manufacturing, monitoring and management

and power and propulsion. These are the key areas of the Australian rail

industry’s competitive advantage, according to the On Track to 2040

technology roadmap. The firms will be demonstrating how they are aligning

with these priority areas to supply the high value-add capabilities needed to

drive our manufacturing industry’s future.

This is a pavilion dedicated to the future enhancement of the Australian

rail manufacturing sector, backed by both industry and government. It

represents an incredible collaborative effort in support of the sector with

support from the Federal Department of Industry, NSW Department

of Trade and Investment, Regional Infrastructure and Services, the Rail

Suppliers Network Australasia, the Australasian Railway Association,

Austrade and the ICN.

I look forward to welcoming you on the pavilion to discover the wide variety

of capabilities our Australian firms have on display.

Bruce Griffiths OAM

Rail Supplier Advocate

The Rail Suppliers Network Australasia pavilion is located at Hall 2,

Stand 196 at the Sydney Convention and Exhibition Centre.

For further information on the Rail Supplier Advocate initiative visit:

www.industry.gov.au/supplieradvocates

RAIL SUPPLIER AdvOcATE fOREWORd

7

Rail Suppliers Network Australasia 4

Rail Supplier Advocate Foreword 5

Contents 7

Austbreck 8

Australian Rail Technology 9

Austrak 10

Battery Energy Power Solutions 11

Bay Rail Consulting 12

Capacitor Technologies 13

Chassis Brakes International (AU, ASEAN) 14

Faiveley Transport Australia Ltd 15

Futuris 16

Harrybilt Engineering & Welding Services 17

Inconmat Australia 18

iOmniscient 19

LaserBond 20

Marciano Industries 21

Meridian Engineers 22

MRX Technologies 23

Northern Fencing Specialists 24

OEM Technology Solutions 25

Plaskona Industries 26

Power Flex Cables 27

RPC Technologies 28

Sitemed 29

Trakblaze Global 30

TTG Transportation Technology 31

Supporting Agencies

The Australasian Railway Association (ARA) 32

The Australian Trade Commission 32

Enterprise Connect 33

Industry Capability Network (ICN) 33

The Commonwealth Scientific and Industrial Research Organisation 34

NSW Trade & Investment 34

cONTENTS


cAPABILITIES

Australian and New Zealand rail market leader in:

- Pantograph manufacture

- Pantograph and pan head repair and overhaul

- Overhead line equipment

- Solid conductor rail (fixed and moveable).

• Australian manufacturing base.

• Melbourne and Sydney operations with field service capability.

• Global technical reach through Fandstan Electric Group.

• Proven technology integrator with solution based focus.

dIScRIMINATORS

• More than thirty years operating experience in local markets.

• Development of in-house expertise, engineering and support.

• Whole of life cost focus for maintenance and design -

- Availability

- Reliability

- Optimisation

- Incidence prediction

AUSTBREcK PTy LTd Austbreck is a market leader in the manufacture of pantographs and rail electrification equipment

QUALITy APPROvALS/AWARdS

• AS/NZS9001:2008 certificate 7105 certified by BSI.

• Winner 2010 RBA Engineering Excellence Award: PANDAS system.

cONTAcT/AddRESS dETAILS

Austbreck Pty Ltd

34-36 Westpool Dr, Hallam, VIC 3803, Australia

Phone: +61 3 9702 4011

1/3A Alexander Street, Auburn, NSW 2144, Australia

Phone: +61 2 9644 4888

Email: [email protected]

Web: www.austbreck.com.au

KEy cUSTOMERS

• Alstom

• Bombardier Transport

Australia

• Downer Rail

• John Holland/GHD

• Rotem

• United Group Rail and UGL

Unipart

• Yarra Trams

KEy PARTNERS

• Fandstan Electric Group:

- Brecknell Willis

- Stemmann Technik

• Authorised representation,

with technical support for:

- Arthur Flury AG

- Furrer + Frey AG

- Transmission Dynamics

- Gevea

9

cAPABILITIES

As a supplier of premium technology, ART have designed, manufactured

and supplied over 1000 high density relay sub rack control systems

(containing 54,000 relays) and over 600 HV earthing switches

(destructively tested to 30,000Amps) and HV junction boxes to Sydney

Trains for the Waratah Train Project.

• System and technology integrators of complex rolling stock electrical

and infrastructure systems.

• Innovative fit for purpose solutions, end to end delivery.

• Equipment repairs, upgrades and overhauls.

• Design, manufacture and supply custom electronic, mechanical and

electromechanical equipment.

dIScRIMINATORS

• 100% Australian owned and over 30 years of experience.

• Proven track record of design, manufacture and delivery.

- Recent projects include design and install of ETCS, ATP and DTRS.

• Fast response with local support as well as global reach.

• Wide range of engineering disciplines - electrical, electronic,

mechanical and electro-mechanical.

• Range of engineering tools; CAD, FEA, sectional wire crimp analysis,

ensure all designs are fit for purpose.

• Extensive range of innovative products proven over many years of

field service.

AUSTRALIAN RAIL TEchNOLOgyAustralian Rail Technology (ART) supply premium electronic, mechanical and electromechanical equipment and technology


• ISO9001:2008 Certified by Davis Langdon.

• Defence Approved Supplier NCAGE ‘Z0LC3’.

• Enterprise Connect SCIP participant.

• Continuous Improvement Programs.

• LEAN management manufacturing principles.

• AEO Accreditation - commenced.


Garry Lougher

Australian Rail Technology

Head Office and Factory (Sydney) also in Melbourne and Perth

10 Brennan Close, Asquith, NSW 2077, Australia

Phone: +61 2 9482 5710

Fax: +61 2 9482 5726

Web: www.ar-tech.com.au

KEy cUSTOMERS

• Downer Rail

• Perth Transport Authority

• Queensland Rail

• Aurizon

• Transport for

New South Wales

• Metro Trains Melbourne

• Pacific National

• United Group Rail

• Sydney Trains

KEy PARTNERS

• Esterline Leach

• Image House

• Galland

• MTM Power

• Lanfranco

• Mafelec

• EKE electronics

• Leonards Electronics

• Omnia

• Rebosio


cAPABILITIES

Austrak is a dedicated concrete sleeper manufacturer that:

• Designs sleepers and factories

• Designs machines and equipment for sleeper manufacture

• Builds factories for sleeper manufacture

• Manufactures sleepers, turnout bearers, road crossing panels and

masts

• Manages logistics

dIScRIMINATORS

• Australia’s largest supplier of concrete sleepers and a leading supplier

of heavy-haul sleepers globally.

• Produced in excess of 18 million sleepers and has built 12 factories

from which it operates.

• Austrak offers flexible client-oriented solutions including:

- Sleeper design

- Sleeper supply

- Factory technology.

AUSTRAK PTy LTdAustrak has more than 10 years experience in providing clients with safety, certainty and engineering excellence

KEy cUSTOMERS

• Queensland Rail

• Fortescue Metals Group

• BHP Billiton

• Rio Tinto

• MTM

• V/Line

• ARTC

KEy PARTNERS

• Laing O’Rourke


• AS/NZS ISO 9001:2008 QMS certification

• AS/NZS ISO 14001:2004 EMS certification

• AS/NZS 4801:2001 SMS certification


Grant Steel

Business Development Manager

GPO Box 5094, Brisbane, QLD 4001, Australia

Phone: +61 7 3308 7880


11


Battery Energy Power Solutions Pty Ltd

96 Fairfield Street, Fairfield, NSW 2165, Australia

Phone: +61 2 9681 3633

Fax: +61 2 9632 4622


Web: www.batteryenergy.com.au

BATTERy ENERgy POWER SOLUTIONS PTy LTdBattery Energy Power Solutions design and manufacture world class performance batteries

cAPABILITIES

• Design and manufacture world class performance batteries for more

than 26 years.

• CSIRO collaboration.

• RailGEL batteries specific for starting, control and lighting batteries

for rolling stock applications.

• EnerGEL and SunGEL batteries for trackside signalling,

communications and telemetry applications.

• Scalable and flexible manufacturing capability.

• Design and manufacture battery enclosures and trays.

• Full in-house CAD/CAM design capability.

• Experienced staff.

dIScRIMINATORS

• Products designed for critical applications.

• Batteries designed for extended life at elevated temperatures.

• Batteries tested to IEC standards.

• Products designed to withstand rolling stock vibration.

• Committed long-term focus on the rail industry.

• Supplying gel batteries to the rail industry for more than 15 years.

KEy cUSTOMERS

• Downer Rail

• UGL Rail

KEy PARTNERS

• CVC Limited

• CSIRO


• ISO9001

• Australia Technology

Showcase Award


cAPABILITIES

• Bay Rail Consulting have a

wide range of engineering

design and consulting

expertise in a variety of

industries including:

- Rail

- Defence – NATO certified

supplier

- Oil and Gas

- Automotive

- Engines

- Petrochemicals

- Veterinary

- Pressure vessels

• Their rail experience in

consulting engineering and

design services in the UK,

Europe and Australia include:

- High speed trains

- Light rail

- Metro

- Rapid transit

- Suburban single deckers

- Suburban double deckers

- Interurban double deckers

- Locomotives

- Stainless steel – (Budd)

- Signalling and track


• Certified NATO supplier


Peter Walker

Director

Bay Rail Consulting

PO Box 42, Beecroft, NSW 2119, Australia

Phone: +61 450 117 360

Fax: +61 2 9484 5447


Web: www.bayrailconsulting.com

BAy RAIL cONSULTINgBay Rail Consulting provide engineering design and consulting expertise

dIScRIMINATORS

• Bay Rail Consulting’s wide ranging field of engineering design

expertise sets them apart from the average industry consultant and

allows them to design and consult on anything from aircraft engines,

pressure vessels and high speed train structures from scratch.

• Rail has given Bay Rail Consulting the ability to apply this broad

appreciation of the engineered world so that clients can rest assured

that their report/design/review/analysis does not reflect just a view

from inside one industry.

13

cAPABILITIES

• CapTech employs state of the art technology and is dedicated to

continual product development and customer satisfaction.

• CapTech services all areas of Australia as well as having worldwide

offices.

• In house design and manufacturing, servicing and support.

• Exclusive representative of BENDER in Australia.

• Support from Bender German – the manufacturer.

• Engineering and manufacturing office in Melbourne.

dIScRIMINATORS

• Customers receive a quality German engineered product.

• Customers receive exceptional local technical support.

• Bender Germany has approximately 80 staff dedicated to the

continual ongoing development and improvement of the product

range to be ahead of the next developments in technologies.

• Exceptional know how and experience by testing on some of the

toughest environments such as Formula 1 cars with extremes in

temperature, vibration and inertia forces.

• Products include a five year warranty that highlights German quality.

KEy cUSTOMERS

• Queensland Rail

• British Railway

• Australian Submarine Corporation

• Australian NAVY

• Joy Mining Machinery

KEy PARTNERS

• AmpControl

• BENDER


• ISO9001: 2008 Certified by SAI Global.


John Piovesan - National Sales Manager

George Kotenko - Engineering Specialist

Capacitor Technologies Pty Ltd

13/40 Edina Rd, Ferntree Gully, 3156 VIC, Australia

PO Box 240, Ferntree Gully BC, 3156 VIC, Australia

Phone: +61 3 9758 5866

Fax: +61 3 9752 2067



Web: www.captech.com.au

cAPAcITOR TEchNOLOgIES PTy LTd Capacitor Technologies (CapTech) is an Australian owned company with local design and manufacturing facilities


chASSIS BRAKES INTERNATIONAL (AU, ASEAN)Chassis Brakes International provides engineering, testing and manufacturing services

cAPABILITIES

• Engineering Services

- Product design through to prototype manufacture.

- Design analysis, optimisation and simulation.

- Electro mechanical equipment design and manufacture.

- Manufacturing process design and implementation.

• Testing Services

- Corrosion, environmental, vibration and NVH dynamometer testing.

- Durability, fatigue, pressure and strength testing including full

vehicle testing.

• Manufacturing

- Cast Iron.

- Cast Aluminium.

- Forging.

- Precision machining and assembly.

- Plating and painting.

- Additional equipment and capabilities.

dIScRIMINATORS

• Full vertical integration providing complete control of your product.

• Full engineering service and support of all products not just “make to

print”.

• Globally competitive pricing and quality from a company

benchmarked by Toyota.

• Experts in light weighting using Aluminium.

• Local company with global reach.


Mark Blackburn

Chassis Brakes International

246 East Boundary Rd, East Bentleigh, VIC 3165, Australia

Phone: +61 3 9575 2499


Web: www.chassisbrakes.com

KEy cUSTOMERS

• Toyota

• Ford

• Holden

• Delkor


• Accredited to ISO 9001, ISO

14001 and TS16949

15

cAPABILITIES

• Design, manufacture, supply and maintenance of complex rolling-

stock systems and equipment.

• Systems and equipment for Passenger Trains, Locomotives and

Freight Wagons.

• Systems include:

- Brake Systems

- HVAC Systems

- Passenger Access Door Systems

- Pantographs

- Coupler Systems

- CCTV, Passenger Information Systems and Data Loggers

• Maintenance capabilities including the repair and overhaul of

equipment, spare parts provision, logistics management and in-field

services.

• Locations through-out Australia and New Zealand, including Sydney,

Melbourne, Perth and Wellington.

dIScRIMINATORS

• Global capabilities delivered through a local market oriented network.

• Truly local approach, with sites throughout the country, providing

services to our customers where they need them.

• Leading edge technology, delivering exceptional functionality and

reliability.

• Full through-life support for systems and products, from design and

delivery through to maintenance and disposal.

fAIvELEy TRANSPORT AUSTRALIA LTdFaiveley is the number one global on-train equipment supplier, providing customers with quality products and service


• AS/NZS ISO 9001:2008 Certified by SGS

• AS/NZS 4801:2001 Certified by SGS


Harry Hanegraaf

Customer Relationship Manager

Faiveley Transport Australia Ltd

Phone: +61 3 8638 2318

Mobile: +61 (0) 406 380 035


Web: www.faiveley.com

KEy cUSTOMERS

• Bombardier Australia

• United Group Ltd Rail

• Public Transport Victoria

• Hyundai Rotem

KEy PARTNERS

• The Faiveley Transport Group

- a truly global company with

more than 40 sites in more than

25 countries around the world


cAPABILITIES

• Manufacture and assemble rail seating and interiors.

• Global product sourcing.

• Full test and validation capability.

dIScRIMINATORS

• Long term supplier to Australian Automotive Industry.

• Global sourcing reach.

• Strong Australian based engineering.

• In-house testing and validation.

• Design for purpose low volume capability.

fUTURIS Full internal design and development capabilities for rail interiors and seating systems

KEy cUSTOMERS

• Queensland Rail Cairns Tilt Train Project

• Bombardier

KEy PARTNERS

• NHTV (China)


• 2012 Frost & Sullivan Asia Pacific Automotive Seating Award

Technology innovation award for composite seat material.

• 2011 Victorian Manufacturing Hall of Fame Award

Inducted for “sustained contribution to manufacturing excellence”.

• 2010 Government of South Australia Safe Work Award

Employer of the Year (private sector).

• 2010 SAE Australia Automotive Excellence Award

Silver innovation award for composite seat frame development.


Sefton Williams

80 Turner St, Port Melbourne, VIC 3207, Australia

Mobile: +61 413 884 241


Web: www.futurisautomotive.com

17

cAPABILITIES

• Harrybilt Engineering specialises in the design and fabrication of

innovative equipment for rail, transport, infrastructure, general

commercial and individual applications.

• Manufacture rail guidance systems for excavators (wheel & track)

and trucks.

• Manufacture rail maintenance and sleeper handling equipment that

facilitate the efficient maintenance of rail infrastructure saving time

and costs.

• Provide high quality manufacturing outcomes for commercial and

individual clients.

dIScRIMINATORS

• On site road/rail vehicle compliance testing facility.

• Rail maintenance equipment designed to Australian standards,

including recent RISSB standards and proven in Australian conditions.

• Employ specialised staff including hydraulics technicians, qualified

engineering fabricators and a qualified mechanical engineer.

• Manufacturer of a multi network compliant triple gauge Hi Rail system

with automatic twist lock.

hARRyBILT ENgINEERINg & WELdINg SERvIcESSmart innovative engineering solutions for rail, infrastructure, commercial and individual applications


Russell Hunter

Mechanical Engineer

Harrybilt Engineering & Welding Services

10 Golden Cr, Ballarat, VIC 3350, Australia

Phone: +61 3 5339 4859

Fax: +61 3 5339 9419


Web: www.harrybilt.com.au

KEy cUSTOMERS

• Downer EDI Works – Rail

• McConnell Dowell

• Powercor Australia

• Aurizon

• Hitachi, Hyundai, Komatsu

• Independent contractors

including Earthtrack, Coleman

Rail, McLeod Rail, Goldcon

Constructions

KEy PARTNERS

• Supporting many local

suppliers including Ballarat

Pressings and Clark Precision

Engineering


• Railcorp and METRO Certified

to provide Road/Rail Vehicle

Compliance Testing

• Member of Australasia Railway

Association

• Board member of Rail

Suppliers Network Australasia


cAPABILITIES

• V-Rod Composite Reinforcing bar that will never rust or corrode and

electromagnetic neutral. Suitable for a variety of applications including:

- Light rail, electromagnetic neutral, hearing loops etc

- Power stations, no stray current, no need to earth

- Smelter pot lines no loss of power to earth

- Marine structure such as wharfs, boat ramps jetties

- Sewer plants

- Piling

- Military faculties, ammunition bunkers, no stray currents

• Smooth V-Rod FRP load transfer dowels

• Micro Hydrophilic Nylon concrete shrinkage fibres

• Specialized concrete water proofing systems

• Full design assistance and solutions that represent whole of life value

dIScRIMINATORS

• Premier Australian provider of engineered FRP concrete reinforcing

solutions, Electromagnetic and Corrosion free reinforcing bars.

• Sustainability through reduced manufacturing embodied energy and

reduced life cycle.

• V-Rod recently used in Kingston, Canada to build and evaluate a

section of new monorail test track, in cooperation with Bombardier

Transportation’s System Division

INcONMAT AUSTRALIASupplier of a range of unique durable products to meet construction needs

KEy cUSTOMERS

• McConnell Dowell

• Ausgrid

• Australian Nuclear Science

• Maritime Construction

• Boral De Martin & Gasparini

• RMS and Waterway Construction Sydney Harbour works

• Port Adelaide Enfield Council

KEy PARTNERS

• Pultrall Inc-Canada

• IRC Pty Ltd


• Synergy Award for Innovation by the Natural Sciences and

Engineering Research Council of Canada (NSERC)

• ISO9001 Certification (since 2003)

• TS16949 Certification (since 2009)

• ISO14000 Certifications (in progress)


Darren Lutze

Inconmat Australia

240 Victoria Road, Largs Bay, SA 5016, Australia

Phone: +61 8 8445 2233

Fax: +61 8 8445 8233


Web: www.inconmat.com.au

Web: www.vrodaustralia.com.au

19

cAPABILITIES

• Technology leader in providing Video Analytics and Surveillance

Solutions since 2001.

• Most comprehensive suite of Video Analytics Systems - Detection,

Recognition and Automated Surveillance Systems (convergence).

• Unmatched Advanced Analytics system capable of analysing realistic,

complex and extremely crowded spaces using internationally patented

technologies.

• Numerous applications including Facial recognition in a crowd, object

detection in a crowd, multi-lingual License Plate Recognition and

detection of unusual people behaviours.

• Industry specific solutions for more than 30 industries ranging from

Airports and Railways to Oil Refineries and Traffic Management.

dIScRIMINATORS

• Sound and Smell analytics for specific applications.

• All systems armed with the Artificial Intelligence based Nuisance

Alarm Minimization System (NAMS) to help eliminate false alarms.

• Over 35,000 licenses sold to customers in many industries around the

world.

• Tailored modules for Rail safety and security:

- Platform Safety - Tunnel Safety - Rail yards - Level Crossings / Grade

Crossings

- Track Protection and Maintenance

- Protection of High Value Assets

- Concourse and external bus/

taxi interchange and more.

iOMNIScIENT PTy LTdiOmniscient provide video analytics and surveillance solutions


• IFSEC 2011 – Best CCTV System of the year

• Zenith Pace Awards – Mining, Minerals and Exploration category

• Winner – Global Security Challenge for Crowded Scenes 2011

• Australian Engineering Excellence Award 2010

• International Patent for Non-Motion detection


Mr Colin Wong

iOmniscient Pty Ltd

Level 9, 815 Pacific Highway, Chatswood, NSW 2067, Australia

Phone: +61 2 9411 7776

Fax: +61 2 9499 5357

Email: [email protected] and [email protected]

Web: www.iomniscient.com

KEy cUSTOMERS

• University of San Francisco

• Canberra Airport

• Rail yard facility, Canada

Perimeter protection

• Indonesian Immigration

• Chicago Transit Authority

• Roads and Maritime Services,

Wollongong, Australia/Traffic

management

KEy PARTNERS

• Siemens

• Microsoft

• Thales

• Oracle

• Honeywell

• EMC

• Motorola


LaserBond reclaims fatigued and worn industrial parts whilst improving

the resistance to wear and corrosion, increasing reliability and service life.

New components and replacement parts are surface engineered to provide

extended service life in a range of challenging environments and applications.

cAPABILITIES

• Laser cladding – 8 Axis Robotic Laser System capable of cladding

complex geometries and internal bores. Can handle up to 6100mm

long x 2000mm diameter & 15 ton.

• Thermal spraying – 7 Axis Robotic System capable of coating

complex geometries and internal bores. Can handle components up to

6100mm long x 2000mm diameter & 15 ton.

• full machine shop - CNC Lathes (7), CNC Horizontal Borer and Mill,

CNC Vertical Mills (2), CNC Horizontal Machining Centre, Vertical Borer,

Horizontal Borers (2), Centre Lathes (11), Mills (5), Cylindrical Grinders (4),

Surface Grinders (2), Internal Grinders (2), Cylindrical Superfinishers (2).

dIScRIMINATORS

• In house laboratory equipped to carry out testing and examination,

including metallographic characterisation, hardness testing and

chemical analysis.

• Scanning Electron Microscope (SEM) allows investigation of coatings

and metallurgy down to the nano scale. The lab is routinely used for

the optimisation of coatings, quality control of incoming materials,

reports to clients on new applications and materials, and failure

analysis as required.

• Portable Coordinate Measuring Machine for precise measurements

and reverse engineering projects.

• Wealth of experience with: 12 years of laser cladding and 20 years of

thermal spraying.

LASERBONd LTd Surface engineering, reclamation and manufacturing

KEy cUSTOMERS

• Weir Minerals

• Joy Global

• Queensland Alumina Limited

• Aurizon (Formerly Queensland Rail)

• Downer

• Blue Scope Steel

• Samcon Engineering

QUALITy STANdARdS ANd OThER AccREdITATIONS

• ISO 9001:2008

• Winner of NSW Government’s Western Sydney Industry Award for

Innovation

AddRESS/cONTAcT dETAILS

Ajith Ranasinghe

Sales Engineer

LaserBond Ltd

2/57 Anderson Road, Smeaton Grange, NSW 2567, Australia

Phone: +61 2 4631 4500

Fax: +61 2 4631 4555

Mob : +61 417 618 512


Web: www.laserbond.com.au

21

cAPABILITIES

• Knowledge with a skilled workforce and investment in the latest state

of the art Amada CNC machinery.

• State of the art flatbed Amada lasers.

• State of the art Amada Rotary head lasers.

• CNC lasers/benders and punches.

• Multiple manufacturing locations.

• Project management.

• Sheetworks/solidworks and tubecam software integrated machinery.

• Amada spot welding capability.

• Fleet of trucks and transport vehicles.

dIScRIMINATORS

• Marciano Industries has expanded to operate from three large modern

facilities.

• Marciano Industries offers services from 3D design to manufacturing.

• Experience and knowledge has seen Marciano Industries become a

key supplier for the rail industry in producing and designing a range

of products for both the passenger and freight locomotive sectors,

ranging from manufacturing of parts, to supply of major locomotive

components.

• Marciano Industries specialises in double skinned self-ventilating

signaling cabinets and retro fit kits.

• Marciano Industries provide rapid prototyping, 3D modelling, lean

and rapid manufacturing processes and concept design abilities.

MARcIANO INdUSTRIESMarciano Industries has 30 years of industry experience in offering specialised services for metal manufacturing solutions


Mervyn Sayers

National Sales and Marketing Manager

Marciano Industries

Mobile: +61 0409 220 868

KEy cUSTOMERS

• UGL Engineering

• Downer EDI Rail

• RailCorp

• Speno Rail

• John Holland Group

• Siemens Rail

• Bombardier

KEy PARTNERS

• RailCorp

• UGL

• Speno Rail

• Downer EDI Rail


• ISO9001:2008 Accredited

• SCIP Program Member


cAPABILITIES

• We have approximately 150 installations in Australia, the United

Kingdom and New Zealand.

• Meridian Engineers currently offer the following products:

- Train Loadout Improvement systems (TLI).

- In-motion train weighing from 0 – 100kph.

- Bin weigh indication systems.

- Train speed and positioning systems.

- Loading control systems.

- Bolt–on structural load cells.

- In-motion truck weighing.

dIScRIMINATORS

Australian designed and manufactured hardware and software.

• Weighbridges:

- Patented bolt on transducer technology that is trade approved in

Australia and Europe.

- Low installation costs (no weighbridge hut required).

- Low maintenance and easy replaceable load cells.

- Low power consumption 40 watts per basic weighbridge.

• TLI Systems:

- Can be retro fitted to existing steel bins.

- Accurate wagon loading (+- 1% of target).

- Extremely accurate train loading (total train loads within +/- 0.1% of

target).

MERIdIAN ENgINEERS PTy LTd Meridian Engineers is one of Australia’s most innovative train weighing companies with a reputation for leading-edge technologies


Unit 9, 50 Howe Street, Osborne Park, WA 6017, Australia

Phone: +61 8 9278 6000

Fax: +61 8 9278 6001


Web: www.meridianengineers.com.au

KEy cUSTOMERS

• BHP Billiton Iron Ore

• FMG

• Aurizon

• QR Queensland Rail

• Whitehaven Coal

• Brookfield Rail

• GrainCorp

• Glencore Xstrata

• RioTinto Coal

• Allied

QUALITy APPROvALS

• Our bolt on system has

received NMI pattern approval

as suitable for trade use

-6/10B/71

• Our bolt on system has

received EU pattern approval

for trade use – NWML

UK/0126/0043

AWARdS

• Australian Bulk Handling

Award Winner 2011.

23

cAPABILITIES

• Vehicle equipment monitoring systems:

- Wheel, brake and pantograph wear monitoring.

- Vision inspection systems.

- Out of gauge measurement.

- Ovality detection.

• Track measurement systems:

- Rail profile monitoring.

- Overhead wire measurement.

- Rail surface crack detection.

- Track geometry measurement.

- Vision inspection systems.

• Driver assist technologies:

- Dumper automatic spotting of locomotive.

- Vehicle location monitor.

- Cruise control.

- Automatic train operation.

- Simulation studies.

dIScRIMINATORS

Value to customers:

• Customised systems.

• More efficiency in monitoring and reporting.

• Improved operational productivity.

• Maintenance planning.

• Lower operating cost.

• Increased safety – less accidents.

MRX TEchNOLOgIESMRX’s automated systems provide objective measurement and monitoring of vehicle equipment and rail infrastructure

cONTAcT / AddRESS dETAILS

Steve Mahede

MRX Technologies

24 Drummond Place, West Perth, WA 6005, Australia

Phone: +61 8 9227 4588

Fax: +61 8 9328 4589


Web: www.mrxtech.com.au

KEy cUSTOMERS

• BHP Billiton Iron Ore

• Bombardier Transportation

• Queensland Rail

• Siemens Transportation

• MTR Corporation

• Brookfield Rail


• AS/NZS ISO 9001:2008


cAPABILITIES

• Over 27 years contracting to rail authorities.

• New and innovative cost effective fencing – access control and

associated products.

• Design and manufacturing facilities – five acre facility at Penrith.

• Northern Fencing Rail Services Division (NFRSD) - with dedicated

resources to rail clients. Branch Network Sydney, NSW Regional and

QLD x 11.

• Comprehensive fleet of equipment.

dIScRIMINATORS

• Designers of fencing systems specific to rail environments that save

money and improve efficiencies.

• Specialists in improving efficiencies in the practices and processes

employed in the rail environment.

NORThERN fENcINg SPEcIALISTS PTy LTd Northern Fencing Specialists design fencing systems specific to the rail environment


• Fencing & building License – 35134S

• Third Party Certified

- OHS: AS:4801:2001

- QMS: ISO 9001:2008

- EMS: ISO 14001: 2004


Michael Kerr

General Manager

Northern Fencing Specialists Pty Ltd

Head Office: 44 Preston Street, Penrith, NSW 2750, Australia

Phone: +61 2 9972 5800

Fax: +61 2 9981 6555

Mob: +61 413 446 966


Web: www.northernfencing.com.au

KEy cUSTOMERS

• Sydney & NSW Trains

• NSW Roads & Maritime

Services

• NSW Public Works

• NSW State Transit Authority

• Juvenile Justice

• Sydney Water

• Local Government – Councils

x 12

• SA Government

KEy PARTNERS

• Parent company – Dunn &

Farrugia

• Twenty five dedicated small

and medium enterprises

specifically trained in working

in rail environments

• Recycle Plastic Products in

rail environments – SAMM

Industries

25

cAPABILITIES

OEM Technology Solutions has developed an extensive suite of products and

services to deliver worldwide to customers to increase their product or system

effectiveness and lead to an improved bottom line. Capabilities include:

• Electronics and software design in accordance with international standards.

• High level manufacturing facilities in-house with complimentary

utilisation of both local and off-shore third party manufacturing

for high volume sub-assemblies such as electronic printed circuit

assemblies (PCA’s) and metalwork.

• Engineering skills to integrate all the elements of a system to deliver a

turn-key solution to the customer.

• Service and maintenance facilities for the on-going support of our

customers and products.

dIScRIMINATORS

• OEM is an established company in the rail, road and industrial

technology industries possessing an extensive suite of hardware

products designed specifically for the industries described.

• All of OEM’s hardware devices are able to connect seamlessly to the

OEM Internet cloud, providing customers with the information and

strategies required to improve their organisation’s performance. We are

able to manage and assemble the operational system using our project

management expertise and our proven Integrated Management System

to deliver a high quality product, on-time and within budget.

OEM TEchNOLOgy SOLUTIONS OEM Technology Solutions provides technology solutions for Original Equipment Manufacturers (OEM’s) and end users


James McLeod

CEO

OEM Technology Solutions

Unit 13, 82 Reserve Road, Artarmon, NSW 2064, Australia

Phone: +61 2 9966 9424

Fax: +61 2 9966 9429


Web: www.oem.net.au

KEy cUSTOMERS

• Knorr-Bremse

• Vossloh Kiepe


• Alstom Transport

• Siemens

• Downer EDI Rail

• United Group Limited Rail

• Faiveley Transport

• Invensys

• Railcorp

• Pacific National

• Australian Railroad Group

KEy PARTNERS

• Petards

• MEN Mikro Elektronik

• Deuta-Werke

• Digi International


• 2012 NSW Premier’s Export

Award for “Innovation in

Exports”

• 2011 ATS - NSW Patrons

Award for Export

Achievement

• 2008 Engineering Excellence

Awards – PC3 Controller

• QMS ISO9001:2008, EMS

ISO14001:2004, OHS

AS18001:2007


cAPABILITIES

• Custom polyurethane and thermoplastic moulders.

• Proven/compliant fire retardant foam cushions for public transport

seating.

• Fire retardant mouldings.

• Open cell and closed cell foam.

• Self skinning foam.

• Reaction injection moulding.

• Reinforced reaction injection moulding.

• Rigid, semi-rigid and flexible polyurethanes.

• Rotational casting.

dIScRIMINATORS

• Highly flexible and innovative.

• Able to handle small runs.

• Australian-made fire retardant foam to meet international standards

(compliant).

• Responsive.

• Years of rail industry proven performance in Victoria, New South

Wales and Queensland.

PLASKONA INdUSTRIESPlaskona Industries manufacture flame retardant foam seating and related products

KEy cUSTOMERS

• Queensland Rail & Queensland National – SMUX20/ EMU

• IMU120

• Maintrain/UGL Unipart

• Bombardier

• EDI/Downer – GM424 & 427 Project

• Vic Rail

• Vix Technologies


• AS / NZ ISO9001:2008.

cONTAcT / AddRESS dETAILS

Andrew Fischer

Plaskona Industries

49 Rushdale Street, Knoxfield, VIC 3156, Australia

Phone: +61 3 9763 4888

Fax: +61 3 9763 1733


Web: www.plaskona.com.au

27

cAPABILITIES

• Power cable.

• Instrumentation cable and control cable.

• Databus cable.

• Signalling and communication.

dIScRIMINATORS

• Innovative ideas and designs to customer specifications.

• Making the impossible, possible, we are not just another cable

company, on time and within budget.

• Globally competitive pricing.

• Urgent orders expressed, 25,000m manufactured and delivered for

Rio Tinto.

POWER fLEX cABLESPower Flex Cables design and manufacture rail and rolling stock solutions

KEy cUSTOMERS

• Invensys

• Ansaldo

• NSW Transport Rail Corp

• Q R National

• Alstrom Transport

• Siemens

• GE


• Cables manufactured to AU/NZ standards.

• Cables manufactured to international standards, IEC 60332-3,

ISO 61034.


Chris O’Grady

Sylvia Livolsi

14/87 Webster Road, Stafford, QLD 4053, Australia

Phone: +61 7 3856 6182

Fax: +61 7 3856 6184


Web: www.powerflexcables.com.au


cAPABILITIES

• For all passenger rail and light rail composites and interiors

requirements:

- Design

- Manufacture

- Supply

- Install

- Service.

• Products include:

- Driver desks

- Toilet modules

- Luggage and storage racks

- Weathershields

- Lightweight, structural and ballistic-rated nose cones

- Retrofitting and integration of modules.

dIScRIMINATORS

• Low risk, price competitive solutions.

• Manufacture and/or integration of interior systems.

• Facilities within Australasia and South Eastern Asia.

• Compliance with international fire standards including BS6853 cat 1(a).

• 30 years servicing the passenger rail industry.

RPc TEchNOLOgIES PTy LTdRPC provide products and services for all passenger rail and light rail composites and interiors


Darren Will

Business Development Manager

RPC Transport

Phone: +61 403 091 001


Web: www.rpctechnologies.com

KEy cUSTOMERS

• Downer Rail


Australia

• Alstom Transport

• UGL Unipart

• Metro Trains Melbourne

• Sydney Trains

• Aurizon

KEy PARTNERS

• PT RPC Indonesia

• RPC Malaysia Ltd

• RPC International, Thailand

• PT MoldCAM RPC


• ISO5001

• AS4801

29

cAPABILITIES

• Provision of mobile medical centres, medical equipment and qualified

paramedics and nurses to support remote rail construction and repairs

and industrial sites.

• Provision and management of medical consumables.

• Provision of all insurances and requirements including drug licence,

ambulance licence (if necessary) and health department approvals.

• Coordination of work injury management.

• Coordination of patient evaluation and retrieval.

• Accredited first aid training and emergency response training.

• Medical and emergency response consulting.

• Onsite drug and alcohol testing.

dIScRIMINATORS

• Qualified and field experienced paramedics not just ambulance service

experience.

• Experience in primary health to manage everyday illness and work

injury not just trauma.

• Ability to mobilise at short notice with fully functional medical centres,

paramedics, nurses, ambulances, fire and rescue vehicles and medical

equipment.

• Quality assured company.

• Liaise with local medical and emergency response agencies to

develop co-ordinated medical and emergency response including

aeromedical evacuation.

SITEMEd PTy LTdSitemed are providers of onsite medical and emergency response services


Nicole Nott

Sitemed Pty Ltd

Head Office: 67 Lipson St, Port Adelaide, SA 5015, Australia

Perth: 100 Havelock St, West Perth, 1300 SITEMED

Melbourne: Level 5, 55 Victoria Parade, Melbourne, 1300 SITEMED

Phone: +61 8 8447 2017

Fax: +61 8 8447 2016


Web: www.sitemed.com.au

KEy cUSTOMERS

• Arrium Mining

• Downer

• Adelaide Aqua

• BHP Billiton

• OZ Minerals

• Heathgate Resources

• HWE Mining, SMR, Iron Ore Mine

• SANTOS


• ISO 9001:2008 -Certified by

EQAS

• State and Territory Drug

Licences

• National Telstra Business

Award 2012


cAPABILITIES

• In-house design electronic, mechanical and software engineers.

• Global sales and service offices.

• Weighing systems for rail vehicle balancing in metro rail workshops,

portable systems used to spot check the weight of a rail vehicle

anywhere, low and high speed electronic sleeper based weighing

systems up to 80kmh, bogie weighing systems.

• Systems designed to suit customer requirements, including mineral

load out stations, power stations, grain operators etc.

dIScRIMINATORS:

• Weighing systems for rail vehicle balancing, which may assist in

preventing derailments, track and rail vehicle damage, brake lock ups

and make for a smoother and more economical ride.

• Trakblaze was the first company in the world to achieve Government

Trade approval in 2003 for train weighing up to 80kmh.

• Recent exports into many countries including China for train

balancing systems.

• Simple to install systems with minimal after sales servicing required.

TRAKBLAzE gLOBALTrakblaze Global has over 80 years’ experience as manufacturers of rail and road vehicle weighing systems


Trakblaze Global

5 Sara Grove, Tottenham, VIC 3012, Australia

Phone: +61 03 9318 9277


Web: www.trakblaze.com

KEy cUSTOMERS

• Shenzhen and Hong Kong

Metro (MTR)

• Rio Tinto WA & Mongolia

• Downer EDI

• V-Line

• Governments, including-

Indonesia, Vietnam Singapore,

South Africa. Morocco

• Private customers in many

countries

KEy PARTNERS

• American, German & Indian

offices


• Compliant with ISO9001:2000

31

cAPABILITIES

• TTG is an Australian clean technology company who operate globally

from Sydney, London, Derby, New Delhi and Beijing.

• TTG supply driver advisory systems and network management tools

that save energy and optimise train pacing to keep trains on time and

manage capacity.

• TTG deliver full turnkey services for any type of train, anywhere, and

provide customers with through life service support.

• TTG’s core product Energymiser® is deployed, or being deployed on:

- +1,000 trains globally.

- +30,000+ kms operating track

- Five continents with representation and projects in Australia, New

Zealand, China, India, Africa and Europe (UK, France and Poland).

dIScRIMINATORS

• TTG products incorporate unique patented technology.

• TTG products are proven in the widest range of applications spanning

bulk and intermodal freight, and urban and interurban passenger and

high speed regional trains.

• TTG products can be retrofitted to existing trains, or integrated into

new trains.

• TTG have over 30 years of R&D history built into its products and

are a recognised global leader in the supply of energy efficient driver

advisory systems.

• TTG products are proven, they save energy and keep trains on time

and offer a ROI of between 9 and 18 months.

• TTG offer a flexible approach that allows them to deliver solutions fully

aligned to customer needs.

KEy cUSTOMERS

• Pacific National (Aus)

• FirstGroup (UK)

• Freightliner (UK)

• Arriva UK Trains

• SNIM (Mauritania)

• KiwiRail (NZ)

• Aurizon (QLD)

KEy PARTNERS

• University of South Australia


• ISO9001:2008 Certified by

Global-Mark

• Link-up Registered Supplier

(UK Qualification Scheme for

Suppliers)

• Modern Railways Industry

Innovation Awards, June 2011

• Premier’s NSW Export

Awards: Highly Commended

in 2011, Finalist in 2012 & 2013

• Modern Railways 2012 First

Group - awarded Innovator

of the Year for implementing

DAS on its fleet

TTg TRANSPORTATION TEchNOLOgy PTy LTdTTG supply driver advisory systems and network management tools


Dale Coleman

Managing Director

TTG Transportation Technology Pty Ltd

Level 3/225 Clarence St, Sydney, NSW 2000, Australia

Phone: +61 2 9249 0100


Web: www.ttgtransportationtechnology.com


The Australasian Railway Association (ARA) is the peak body for

rail throughout Australia and New Zealand. We are a member based

association representing passenger and freight operators, track owners

and managers, manufacturers of rolling stock, construction companies and

all other firms supplying and contributing to the Australasian rail sector.

The ARA connects rail organisations across Australasia creating productive

networks that benefit the industry. This is demonstrated through the

organisations:

• 180 members.

• 84 industry reports and information leaflets.

• 21 annual conferences, courses and workshops.

• 146 industry committees and working groups.

• 107 submissions to government.

• 21.1 million people reached in 2011 through media coverage.

The primary purpose of the ARA is to create an environment for the rail

industry to prosper. We lead the advocacy effort to all levels of government

to drive policy reform and increase investment in rail.

As the voice of the Australasian rail industry, we facilitate, coordinate and

communicate on behalf of the industry to achieve results.

Rail has a good story to tell and we aim to tell it.

The Australian Trade Commission, Austrade, is the Australian

Government’s trade, investment and education promotion agency.

Through a global network of offices, Austrade assists Australian companies

to grow their international business, attract productive foreign direct

investment into Australia and promote Australia’s education sector

internationally.

Austrade provides information and advice that can help Australian

companies reduce the time, cost and risk of exporting. We also provide a

range of services to Australian exporters looking to expand their business in

growth and emerging markets, including:

• Information and advice on doing business in international markets.

• Help with overseas market selection.

• Identification of relevant overseas contacts.

• Assistance with market entry and expansion.

• Identification and follow-up of specific international business

opportunities.

We also administer the Export Market Development Grant (EMDG) scheme,

which is the Australian Government’s financial assistance program for

aspiring and current exporters.


Phone: 13 28 78 (within Australia)

Web: www.austrade.gov.au

The Australasian Railway Association (ARA)

The Australian Trade Commission

33

Enterprise Connect is an Australian Government program that services

small to medium sized businesses in a wide range of industries.

Our core service is a comprehensive, confidential and independent Business

Review, delivered at no charge. Conducted by skilled Business Advisers,

the Business Review is carried out on site and involves a top-to-bottom

analysis of your business and recommendations are made from the review.

Grant funding is available to help implement recommendations.

We also work closely with rail firms to improve the competitiveness of

the rail supply chain through embedding continuous improvement within

participating companies.

The Supplier Continuous Improvement Program (SCIP), delivered at no

charge, focuses on accreditation and quality improvement, development

and performance, as well as business relationships, in order to improve

efficiency, reduce duplication and lower overheads and costs in the

supply chain.

For further information on how your company can be involved in SCIP

please call 02 6213 7552 or email [email protected].

Industry Capability Network (ICN) is an independent organisation that

introduces innovative rail suppliers to international rail manufacturers.

ICN gives you access to rail experts in Australia and New Zealand that can

meet your needs including price, delivery and quality.

ICN’s network of specialised consultants can also work with you to provide

independent procurement advice and introduce you to a range of highly

skilled and dependable rail suppliers. Talk to ICN about cost-effective,

innovative ways to run your rail supply chain or next project.

• More than 29 years’ experience identifying suppliers for manufacturers

and major projects globally.

• A national team of technical consultants with an in-depth knowledge

of innovative rail suppliers.

• Expertise in supply chain development and technology solutions. Free

of charge and government supported.

• Online supplier database of more than 71,000 businesses.

• 30 offices around Australia and New Zealand.

CONTACT DETAILS

Tony Carney

National Sector Manager – Rail

E: [email protected]

T: +61 418 353 718

Level 11, 10 Queens Road

Melbourne VIC 3004

Australia

www.icn.org.au

Enterprise Connect

Industry Capability Network (ICN)


The Commonwealth Scientific and Industrial Research Organisation

(CSIRO) is Australia’s national science agency. It generates new

intellectual property and supports industry with engineering and

R&D capability.

CSIRO partners with manufacturers servicing the rail industry to develop

and commercialise advanced materials, processes and devices that improve

economic and environmental performance. CSIRO improves the competitive

position of its partners via improvements in cost competitiveness and

product performance, creation of new business and integration into

domestic and global supply chains.

CSIRO has established world class capabilities in Materials Science and

Engineering, Process Science, Mathematical and Information Systems,

Energy Technology and Information and Communications Technology.

CSIRO draws upon these capabilities to address all three of the technology

priority areas identified in the “On Track for 2040” rail industry technology

road map:

• Materials and Manufacturing

• Monitoring and Management

• Power and Propulsion

Typical outcomes of CSIRO projects include:

• Energy storage technology

• Advanced electric machines and power electronics

• Light weight and high performance designs/materials

• Sensors and sensor networks

• Software for modelling complex systems

NSW Trade & Investment is responsible for helping drive sustainable

economic growth in NSW, uniting key Government economic development

agencies, offices and authorities to provide maximum benefit to the State.

NSW Trade & Investment works with industry and the community in areas

such as trade, business and investment; primary industries, food and water;

mineral resources and energy; and tourism, major events, hospitality, racing

and the arts.

The Department’s Investment & Export Services division provides advice

and support to NSW exporters to build export capabilities; supports a

proactive international trade engagement program; assists foreign and local

businesses to establish new operations, to relocate or to expand; and briefs

incoming trade and investment delegations.

The division manages the NSW Government’s international business offices

in China, India, the United Arab Emirates and the United States of America.

For more information visit www.export.nsw.gov.au.

The Commonwealth Scientific and Industrial Research Organisation

NSW Trade & Investment

AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRy AusRAIL Capability... · AusRAIL 2013...

Documents

Transcript of AusRAIL 2013 Rail SupplieRS NetwoRk auStRalaSia DiRectoRy AusRAIL Capability... · AusRAIL 2013...