AURORA-Spec-Sheet-Ballasted-Roof-Mount
2
• Wind tunnel tested up to 150 mph • Anchor attachment options • Integrated grounding • UL 467 Certified • Minimal installation effort • Aluminum and 18-8 Stainless Steel • Low PSF roof load - starts at 3 PSF • Stackable design maximizes container load • Tilt angles of 5 and 10 degrees • Custom tilt angles available Key Features The Aurora is a ballasted roof mount solution featuring integrated grounding, up to 150 M.P.H. wind load, and UL 467 Certification. The Aurora's simple assembly design make it a leader in driving down installation time and balance of system costs. Modular assembly allows for averting roof top obstructions and utilizing available space in the most efficient way. Reduce shipping costs as a result of the stackable lightweight design. Innovative Racking System For Your Roof "Your Single Solar Source" Aurora Ballasted Roof Mount SLR-MTBRM-BASE REV1 / 8-14 Grounding Clamp Racking Layout
-
Upload
david-lewenz -
Category
Documents
-
view
56 -
download
0
Transcript of AURORA-Spec-Sheet-Ballasted-Roof-Mount
• Windtunneltestedupto150mph• Anchorattachmentoptions• Integratedgrounding• UL467Certified• Minimalinstallationeffort
• Aluminumand18-8StainlessSteel• LowPSFroofload-startsat3PSF• Stackabledesignmaximizescontainerload• Tiltanglesof5and10degrees• Customtiltanglesavailable
Key Features
TheAuroraisaballastedroofmountsolutionfeaturingintegratedgrounding,upto150M.P.H.windload,andUL467Certification.TheAurora'ssimpleassemblydesignmakeitaleaderindrivingdowninstallationtimeandbalanceofsystemcosts.Modularassemblyallowsforavertingrooftopobstructionsandutilizingavailablespaceinthemostefficientway.Reduceshippingcostsasaresultofthestackablelightweightdesign.
Innovative Racking System For Your Roof
"Your Single Solar Source"
AuroraBallastedRoofMount
SLR-MTBRM-BASEREV1/8-14
Grounding ClampRacking Layout
AuroraBallasted Roof Mount
Technical Specifications
Major Components
No. Part Starter Section
Add Section
1. Base 2pcs 2pc2. MidClamp 2pc 4pc3. EndClamp 2pcs 0pcs
Allassemblyhardwareincluded.
1 Base
Application Flat Roof
Foundation Non-Penetrating
Module Orientation Landscape
Module Compatibility
Height 31 - 50 mmWidth 982 - 1001 mmLength (60 Cell) 1638 - 1675 mm Length (72 Cell) 1950 - 1990 mm
Available Tilt Angles 5° - 10° (Custom angles available on request)
Wind Load Up to 150 MPH *
Snow Load Up to 30 PSF *
Roof Load 3 - 5 PSF
Material Composition Aluminum
Grounding Pre-Integrated E/W & N/S
Certifications UL 467 / WInd Tunnel Tested
Warranty 25 Years
Manufacturing Made in USA
1007IndustrialBlvdAlbion,Michigan49224
(517)[email protected]
Lightweight stackable aluminum mounting base. Complete electrical bonding at all connection points per base.
2 End Clamps2
1
Top clamp module hardware eliminates underneath panel attachments. Integrated grounding reduces grounding effort. Bolt design fits all module sizes
*Snow loads are ground snow loads estimated at 5 deg.*wind loads are estimated at 5 deg.*Loading is single factor snow only or wind only.*All specifications subject to change without notice.
3
3 Mid ClampsIntegrated grounding design reduces grounding effort. UL approved module clamps fit any size module.
